C++ BN_MONT_CTX_set_locked函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中BN_MONT_CTX_set_locked函数的典型用法代码示例。如果您正苦于以下问题：C++ BN_MONT_CTX_set_locked函数的具体用法？C++ BN_MONT_CTX_set_locked怎么用？C++ BN_MONT_CTX_set_locked使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了BN_MONT_CTX_set_locked函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: BN_CTX_new

BN_BLINDING *rsa_setup_blinding(RSA *rsa, BN_CTX *in_ctx) {
  BIGNUM local_n;
  BIGNUM *e, *n;
  BN_CTX *ctx;
  BN_BLINDING *ret = NULL;
  BN_MONT_CTX *mont_ctx = NULL;

  if (in_ctx == NULL) {
    ctx = BN_CTX_new();
    if (ctx == NULL) {
      return 0;
    }
  } else {
    ctx = in_ctx;
  }

  BN_CTX_start(ctx);
  e = BN_CTX_get(ctx);
  if (e == NULL) {
    OPENSSL_PUT_ERROR(RSA, ERR_R_MALLOC_FAILURE);
    goto err;
  }

  if (rsa->e == NULL) {
    e = rsa_get_public_exp(rsa->d, rsa->p, rsa->q, ctx);
    if (e == NULL) {
      OPENSSL_PUT_ERROR(RSA, RSA_R_NO_PUBLIC_EXPONENT);
      goto err;
    }
  } else {
    e = rsa->e;
  }

  n = &local_n;
  BN_with_flags(n, rsa->n, BN_FLG_CONSTTIME);

  if (rsa->flags & RSA_FLAG_CACHE_PUBLIC) {
    mont_ctx = BN_MONT_CTX_set_locked(&rsa->mont_n, &rsa->lock, rsa->n, ctx);
    if (mont_ctx == NULL) {
      goto err;
    }
  }

  ret = BN_BLINDING_create_param(NULL, e, n, ctx, mont_ctx);
  if (ret == NULL) {
    OPENSSL_PUT_ERROR(RSA, ERR_R_BN_LIB);
    goto err;
  }

err:
  BN_CTX_end(ctx);
  if (in_ctx == NULL) {
    BN_CTX_free(ctx);
  }
  if (rsa->e == NULL) {
    BN_free(e);
  }

  return ret;
}

开发者ID:reaperhulk，项目名称:ring，代码行数:60，代码来源:blinding.c

示例2: compute_key

static int compute_key(unsigned char *key, const BIGNUM *pub_key, DH *dh)
	{
	BN_CTX *ctx=NULL;
	BN_MONT_CTX *mont=NULL;
	BIGNUM *tmp;
	int ret= -1;
        int check_result;

	if (BN_num_bits(dh->p) > OPENSSL_DH_MAX_MODULUS_BITS)
		{
		DHerr(DH_F_COMPUTE_KEY,DH_R_MODULUS_TOO_LARGE);
		goto err;
		}

	ctx = BN_CTX_new();
	if (ctx == NULL) goto err;
	BN_CTX_start(ctx);
	tmp = BN_CTX_get(ctx);
	
	if (dh->priv_key == NULL)
		{
		DHerr(DH_F_COMPUTE_KEY,DH_R_NO_PRIVATE_VALUE);
		goto err;
		}

	if (dh->flags & DH_FLAG_CACHE_MONT_P)
		{
		mont = BN_MONT_CTX_set_locked(&dh->method_mont_p,
				CRYPTO_LOCK_DH, dh->p, ctx);
		if ((dh->flags & DH_FLAG_NO_EXP_CONSTTIME) == 0)
			{
			/* XXX */
			BN_set_flags(dh->priv_key, BN_FLG_EXP_CONSTTIME);
			}
		if (!mont)
			goto err;
		}

        if (!DH_check_pub_key(dh, pub_key, &check_result) || check_result)
		{
		DHerr(DH_F_COMPUTE_KEY,DH_R_INVALID_PUBKEY);
		goto err;
		}

	if (!dh->meth->bn_mod_exp(dh, tmp, pub_key, dh->priv_key,dh->p,ctx,mont))
		{
		DHerr(DH_F_COMPUTE_KEY,ERR_R_BN_LIB);
		goto err;
		}

	ret=BN_bn2bin(tmp,key);
err:
	if (ctx != NULL)
		{
		BN_CTX_end(ctx);
		BN_CTX_free(ctx);
		}
	return(ret);
	}

开发者ID:174high，项目名称:openssl-0.9.8e_linux_porting，代码行数:59，代码来源:dh_key.c

示例3: DH_compute_key

int DH_compute_key(unsigned char *out, const BIGNUM *peers_key, DH *dh) {
  BN_CTX *ctx = NULL;
  BIGNUM *shared_key;
  int ret = -1;
  int check_result;

  if (BN_num_bits(dh->p) > OPENSSL_DH_MAX_MODULUS_BITS) {
    OPENSSL_PUT_ERROR(DH, DH_R_MODULUS_TOO_LARGE);
    goto err;
  }

  ctx = BN_CTX_new();
  if (ctx == NULL) {
    goto err;
  }
  BN_CTX_start(ctx);
  shared_key = BN_CTX_get(ctx);
  if (shared_key == NULL) {
    goto err;
  }

  if (dh->priv_key == NULL) {
    OPENSSL_PUT_ERROR(DH, DH_R_NO_PRIVATE_VALUE);
    goto err;
  }

  if (!BN_MONT_CTX_set_locked(&dh->method_mont_p, &dh->method_mont_p_lock,
                              dh->p, ctx)) {
    goto err;
  }

  if (!DH_check_pub_key(dh, peers_key, &check_result) || check_result) {
    OPENSSL_PUT_ERROR(DH, DH_R_INVALID_PUBKEY);
    goto err;
  }

  if (!BN_mod_exp_mont_consttime(shared_key, peers_key, dh->priv_key, dh->p,
                                 ctx, dh->method_mont_p)) {
    OPENSSL_PUT_ERROR(DH, ERR_R_BN_LIB);
    goto err;
  }

  ret = BN_bn2bin(shared_key, out);

err:
  if (ctx != NULL) {
    BN_CTX_end(ctx);
    BN_CTX_free(ctx);
  }

  return ret;
}

开发者ID:ro-ot，项目名称:boringssl，代码行数:52，代码来源:dh.c

示例4: compute_key

static int compute_key(unsigned char *key, const BIGNUM *pub_key, DH *dh)
	{
	BN_CTX *ctx;
	BN_MONT_CTX *mont=NULL;
	BIGNUM *tmp;
	int ret= -1;

	ctx = BN_CTX_new();
	if (ctx == NULL) goto err;
	BN_CTX_start(ctx);
	tmp = BN_CTX_get(ctx);
	
	if (dh->priv_key == NULL)
		{
		DHerr(DH_F_DH_COMPUTE_KEY,DH_R_NO_PRIVATE_VALUE);
		goto err;
		}

	if (dh->flags & DH_FLAG_CACHE_MONT_P)
		{
		mont = BN_MONT_CTX_set_locked(
				(BN_MONT_CTX **)&dh->method_mont_p,
				CRYPTO_LOCK_DH, dh->p, ctx);
		if ((dh->flags & DH_FLAG_NO_EXP_CONSTTIME) == 0)
			{
			/* XXX */
			BN_set_flags(dh->priv_key, BN_FLG_EXP_CONSTTIME);
			}
		if (!mont)
			goto err;
		}

	if (!dh->meth->bn_mod_exp(dh, tmp, pub_key, dh->priv_key,dh->p,ctx,mont))
		{
		DHerr(DH_F_DH_COMPUTE_KEY,ERR_R_BN_LIB);
		goto err;
		}

	ret=BN_bn2bin(tmp,key);
err:
	if (ctx != NULL)
		{
		BN_CTX_end(ctx);
		BN_CTX_free(ctx);
		}
	return(ret);
	}

开发者ID:niubl，项目名称:camera_project，代码行数:47，代码来源:dh_key.c

示例5: rsa_ossl_public_encrypt

static int rsa_ossl_public_encrypt(int flen, const unsigned char *from,
                                  unsigned char *to, RSA *rsa, int padding)
{
    BIGNUM *f, *ret;
    int i, num = 0, r = -1;
    unsigned char *buf = NULL;
    BN_CTX *ctx = NULL;

    if (BN_num_bits(rsa->n) > OPENSSL_RSA_MAX_MODULUS_BITS) {
        RSAerr(RSA_F_RSA_OSSL_PUBLIC_ENCRYPT, RSA_R_MODULUS_TOO_LARGE);
        return -1;
    }

    if (BN_ucmp(rsa->n, rsa->e) <= 0) {
        RSAerr(RSA_F_RSA_OSSL_PUBLIC_ENCRYPT, RSA_R_BAD_E_VALUE);
        return -1;
    }

    /* for large moduli, enforce exponent limit */
    if (BN_num_bits(rsa->n) > OPENSSL_RSA_SMALL_MODULUS_BITS) {
        if (BN_num_bits(rsa->e) > OPENSSL_RSA_MAX_PUBEXP_BITS) {
            RSAerr(RSA_F_RSA_OSSL_PUBLIC_ENCRYPT, RSA_R_BAD_E_VALUE);
            return -1;
        }
    }

    if ((ctx = BN_CTX_new()) == NULL)
        goto err;
    BN_CTX_start(ctx);
    f = BN_CTX_get(ctx);
    ret = BN_CTX_get(ctx);
    num = BN_num_bytes(rsa->n);
    buf = OPENSSL_malloc(num);
    if (ret == NULL || buf == NULL) {
        RSAerr(RSA_F_RSA_OSSL_PUBLIC_ENCRYPT, ERR_R_MALLOC_FAILURE);
        goto err;
    }

    switch (padding) {
    case RSA_PKCS1_PADDING:
        i = RSA_padding_add_PKCS1_type_2(buf, num, from, flen);
        break;
    case RSA_PKCS1_OAEP_PADDING:
        i = RSA_padding_add_PKCS1_OAEP(buf, num, from, flen, NULL, 0);
        break;
    case RSA_SSLV23_PADDING:
        i = RSA_padding_add_SSLv23(buf, num, from, flen);
        break;
    case RSA_NO_PADDING:
        i = RSA_padding_add_none(buf, num, from, flen);
        break;
    default:
        RSAerr(RSA_F_RSA_OSSL_PUBLIC_ENCRYPT, RSA_R_UNKNOWN_PADDING_TYPE);
        goto err;
    }
    if (i <= 0)
        goto err;

    if (BN_bin2bn(buf, num, f) == NULL)
        goto err;

    if (BN_ucmp(f, rsa->n) >= 0) {
        /* usually the padding functions would catch this */
        RSAerr(RSA_F_RSA_OSSL_PUBLIC_ENCRYPT,
               RSA_R_DATA_TOO_LARGE_FOR_MODULUS);
        goto err;
    }

    if (rsa->flags & RSA_FLAG_CACHE_PUBLIC)
        if (!BN_MONT_CTX_set_locked(&rsa->_method_mod_n, rsa->lock,
                                    rsa->n, ctx))
            goto err;

    if (!rsa->meth->bn_mod_exp(ret, f, rsa->e, rsa->n, ctx,
                               rsa->_method_mod_n))
        goto err;

    /*
     * BN_bn2binpad puts in leading 0 bytes if the number is less than
     * the length of the modulus.
     */
    r = BN_bn2binpad(ret, to, num);
 err:
    if (ctx != NULL)
        BN_CTX_end(ctx);
    BN_CTX_free(ctx);
    OPENSSL_clear_free(buf, num);
    return r;
}

开发者ID:upadhyaym，项目名称:openssl，代码行数:89，代码来源:rsa_ossl.c

示例6: mod_exp

static int mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa, BN_CTX *ctx) {
  assert(ctx != NULL);

  assert(rsa->n != NULL);
  assert(rsa->e != NULL);
  assert(rsa->d != NULL);
  assert(rsa->p != NULL);
  assert(rsa->q != NULL);
  assert(rsa->dmp1 != NULL);
  assert(rsa->dmq1 != NULL);
  assert(rsa->iqmp != NULL);

  BIGNUM *r1, *m1, *vrfy;
  BIGNUM local_dmp1, local_dmq1, local_c, local_r1;
  BIGNUM *dmp1, *dmq1, *c, *pr1;
  int ret = 0;
  size_t i, num_additional_primes = 0;

  if (rsa->additional_primes != NULL) {
    num_additional_primes = sk_RSA_additional_prime_num(rsa->additional_primes);
  }

  BN_CTX_start(ctx);
  r1 = BN_CTX_get(ctx);
  m1 = BN_CTX_get(ctx);
  vrfy = BN_CTX_get(ctx);
  if (r1 == NULL ||
      m1 == NULL ||
      vrfy == NULL) {
    goto err;
  }

  {
    BIGNUM local_p, local_q;
    BIGNUM *p = NULL, *q = NULL;

    /* Make sure BN_mod in Montgomery initialization uses BN_FLG_CONSTTIME. */
    BN_init(&local_p);
    p = &local_p;
    BN_with_flags(p, rsa->p, BN_FLG_CONSTTIME);

    BN_init(&local_q);
    q = &local_q;
    BN_with_flags(q, rsa->q, BN_FLG_CONSTTIME);

    if (!BN_MONT_CTX_set_locked(&rsa->mont_p, &rsa->lock, p, ctx) ||
        !BN_MONT_CTX_set_locked(&rsa->mont_q, &rsa->lock, q, ctx)) {
      goto err;
    }
  }

  if (!BN_MONT_CTX_set_locked(&rsa->mont_n, &rsa->lock, rsa->n, ctx)) {
    goto err;
  }

  /* compute I mod q */
  c = &local_c;
  BN_with_flags(c, I, BN_FLG_CONSTTIME);
  if (!BN_mod(r1, c, rsa->q, ctx)) {
    goto err;
  }

  /* compute r1^dmq1 mod q */
  dmq1 = &local_dmq1;
  BN_with_flags(dmq1, rsa->dmq1, BN_FLG_CONSTTIME);
  if (!BN_mod_exp_mont_consttime(m1, r1, dmq1, rsa->q, ctx, rsa->mont_q)) {
    goto err;
  }

  /* compute I mod p */
  c = &local_c;
  BN_with_flags(c, I, BN_FLG_CONSTTIME);
  if (!BN_mod(r1, c, rsa->p, ctx)) {
    goto err;
  }

  /* compute r1^dmp1 mod p */
  dmp1 = &local_dmp1;
  BN_with_flags(dmp1, rsa->dmp1, BN_FLG_CONSTTIME);
  if (!BN_mod_exp_mont_consttime(r0, r1, dmp1, rsa->p, ctx, rsa->mont_p)) {
    goto err;
  }

  if (!BN_sub(r0, r0, m1)) {
    goto err;
  }
  /* This will help stop the size of r0 increasing, which does
   * affect the multiply if it optimised for a power of 2 size */
  if (BN_is_negative(r0)) {
    if (!BN_add(r0, r0, rsa->p)) {
      goto err;
    }
  }

  if (!BN_mul(r1, r0, rsa->iqmp, ctx)) {
    goto err;
  }

  /* Turn BN_FLG_CONSTTIME flag on before division operation */
  pr1 = &local_r1;
//.........这里部分代码省略.........

开发者ID:caiolima，项目名称:webkit，代码行数:101，代码来源:rsa_impl.c

示例7: RSA_verify_raw

int RSA_verify_raw(RSA *rsa, size_t *out_len, uint8_t *out, size_t max_out,
                   const uint8_t *in, size_t in_len, int padding) {
  if (rsa->n == NULL || rsa->e == NULL) {
    OPENSSL_PUT_ERROR(RSA, RSA_R_VALUE_MISSING);
    return 0;
  }

  const unsigned rsa_size = RSA_size(rsa);
  BIGNUM *f, *result;
  int r = -1;

  if (max_out < rsa_size) {
    OPENSSL_PUT_ERROR(RSA, RSA_R_OUTPUT_BUFFER_TOO_SMALL);
    return 0;
  }

  if (in_len != rsa_size) {
    OPENSSL_PUT_ERROR(RSA, RSA_R_DATA_LEN_NOT_EQUAL_TO_MOD_LEN);
    return 0;
  }

  if (!check_modulus_and_exponent_sizes(rsa)) {
    return 0;
  }

  BN_CTX *ctx = BN_CTX_new();
  if (ctx == NULL) {
    return 0;
  }

  int ret = 0;
  uint8_t *buf = NULL;

  BN_CTX_start(ctx);
  f = BN_CTX_get(ctx);
  result = BN_CTX_get(ctx);
  if (f == NULL || result == NULL) {
    OPENSSL_PUT_ERROR(RSA, ERR_R_MALLOC_FAILURE);
    goto err;
  }

  if (padding == RSA_NO_PADDING) {
    buf = out;
  } else {
    /* Allocate a temporary buffer to hold the padded plaintext. */
    buf = OPENSSL_malloc(rsa_size);
    if (buf == NULL) {
      OPENSSL_PUT_ERROR(RSA, ERR_R_MALLOC_FAILURE);
      goto err;
    }
  }

  if (BN_bin2bn(in, in_len, f) == NULL) {
    goto err;
  }

  if (BN_ucmp(f, rsa->n) >= 0) {
    OPENSSL_PUT_ERROR(RSA, RSA_R_DATA_TOO_LARGE_FOR_MODULUS);
    goto err;
  }

  if (!BN_MONT_CTX_set_locked(&rsa->mont_n, &rsa->lock, rsa->n, ctx) ||
      !BN_mod_exp_mont(result, f, rsa->e, rsa->n, ctx, rsa->mont_n)) {
    goto err;
  }

  if (!BN_bn2bin_padded(buf, rsa_size, result)) {
    OPENSSL_PUT_ERROR(RSA, ERR_R_INTERNAL_ERROR);
    goto err;
  }

  switch (padding) {
    case RSA_PKCS1_PADDING:
      r = RSA_padding_check_PKCS1_type_1(out, rsa_size, buf, rsa_size);
      break;
    case RSA_NO_PADDING:
      r = rsa_size;
      break;
    default:
      OPENSSL_PUT_ERROR(RSA, RSA_R_UNKNOWN_PADDING_TYPE);
      goto err;
  }

  if (r < 0) {
    OPENSSL_PUT_ERROR(RSA, RSA_R_PADDING_CHECK_FAILED);
  } else {
    *out_len = r;
    ret = 1;
  }

err:
  BN_CTX_end(ctx);
  BN_CTX_free(ctx);
  if (buf != out) {
    OPENSSL_free(buf);
  }
  return ret;
}

开发者ID:caiolima，项目名称:webkit，代码行数:98，代码来源:rsa_impl.c

示例8: RSA_eay_public_decrypt

/* signature verification */
static int RSA_eay_public_decrypt(int flen, const unsigned char *from,
	     unsigned char *to, RSA *rsa, int padding)
	{
	BIGNUM *f,*ret;
	int i,num=0,r= -1;
	unsigned char *p;
	unsigned char *buf=NULL;
	BN_CTX *ctx=NULL;

	if (BN_num_bits(rsa->n) > OPENSSL_RSA_MAX_MODULUS_BITS)
		{
		RSAerr(RSA_F_RSA_EAY_PUBLIC_DECRYPT, RSA_R_MODULUS_TOO_LARGE);
		return -1;
		}

	if (BN_ucmp(rsa->n, rsa->e) <= 0)
		{
		RSAerr(RSA_F_RSA_EAY_PUBLIC_DECRYPT, RSA_R_BAD_E_VALUE);
		return -1;
		}

	/* for large moduli, enforce exponent limit */
	if (BN_num_bits(rsa->n) > OPENSSL_RSA_SMALL_MODULUS_BITS)
		{
		if (BN_num_bits(rsa->e) > OPENSSL_RSA_MAX_PUBEXP_BITS)
			{
			RSAerr(RSA_F_RSA_EAY_PUBLIC_DECRYPT, RSA_R_BAD_E_VALUE);
			return -1;
			}
		}
	
	if((ctx = BN_CTX_new()) == NULL) goto err;
	BN_CTX_start(ctx);
	f = BN_CTX_get(ctx);
	ret = BN_CTX_get(ctx);
	num=BN_num_bytes(rsa->n);
	buf = OPENSSL_malloc(num);
	if(!f || !ret || !buf)
		{
		RSAerr(RSA_F_RSA_EAY_PUBLIC_DECRYPT,ERR_R_MALLOC_FAILURE);
		goto err;
		}

	/* This check was for equality but PGP does evil things
	 * and chops off the top '0' bytes */
	if (flen > num)
		{
		RSAerr(RSA_F_RSA_EAY_PUBLIC_DECRYPT,RSA_R_DATA_GREATER_THAN_MOD_LEN);
		goto err;
		}

	if (BN_bin2bn(from,flen,f) == NULL) goto err;

	if (BN_ucmp(f, rsa->n) >= 0)
		{
		RSAerr(RSA_F_RSA_EAY_PUBLIC_DECRYPT,RSA_R_DATA_TOO_LARGE_FOR_MODULUS);
		goto err;
		}

	if (rsa->flags & RSA_FLAG_CACHE_PUBLIC)
		if (!BN_MONT_CTX_set_locked(&rsa->_method_mod_n, CRYPTO_LOCK_RSA, rsa->n, ctx))
			goto err;

	if (!rsa->meth->bn_mod_exp(ret,f,rsa->e,rsa->n,ctx,
		rsa->_method_mod_n)) goto err;

	if ((padding == RSA_X931_PADDING) && ((ret->d[0] & 0xf) != 12))
		BN_sub(ret, rsa->n, ret);

	p=buf;
	i=BN_bn2bin(ret,p);

	switch (padding)
		{
	case RSA_PKCS1_PADDING:
		r=RSA_padding_check_PKCS1_type_1(to,num,buf,i,num);
		break;
	case RSA_X931_PADDING:
		r=RSA_padding_check_X931(to,num,buf,i,num);
		break;
	case RSA_NO_PADDING:
		r=RSA_padding_check_none(to,num,buf,i,num);
		break;
	default:
		RSAerr(RSA_F_RSA_EAY_PUBLIC_DECRYPT,RSA_R_UNKNOWN_PADDING_TYPE);
		goto err;
		}
	if (r < 0)
		RSAerr(RSA_F_RSA_EAY_PUBLIC_DECRYPT,RSA_R_PADDING_CHECK_FAILED);

err:
	if (ctx != NULL)
		{
		BN_CTX_end(ctx);
		BN_CTX_free(ctx);
		}
	if (buf != NULL)
		{
		OPENSSL_cleanse(buf,num);
//.........这里部分代码省略.........

开发者ID:repos-holder，项目名称:openbsd-patches，代码行数:101，代码来源:rsa_eay.c

示例9: RSA_eay_private_encrypt


//.........这里部分代码省略.........
	case RSA_NO_PADDING:
		i=RSA_padding_add_none(buf,num,from,flen);
		break;
	case RSA_SSLV23_PADDING:
	default:
		RSAerr(RSA_F_RSA_EAY_PRIVATE_ENCRYPT,RSA_R_UNKNOWN_PADDING_TYPE);
		goto err;
		}
	if (i <= 0) goto err;

	if (BN_bin2bn(buf,num,f) == NULL) goto err;
	
	if (BN_ucmp(f, rsa->n) >= 0)
		{	
		/* usually the padding functions would catch this */
		RSAerr(RSA_F_RSA_EAY_PRIVATE_ENCRYPT,RSA_R_DATA_TOO_LARGE_FOR_MODULUS);
		goto err;
		}

	if (!(rsa->flags & RSA_FLAG_NO_BLINDING))
		{
		blinding = rsa_get_blinding(rsa, &local_blinding, ctx);
		if (blinding == NULL)
			{
			RSAerr(RSA_F_RSA_EAY_PRIVATE_ENCRYPT, ERR_R_INTERNAL_ERROR);
			goto err;
			}
		}
	
	if (blinding != NULL)
		if (!rsa_blinding_convert(blinding, local_blinding, f, br, ctx))
			goto err;

	if ( (rsa->flags & RSA_FLAG_EXT_PKEY) ||
		((rsa->p != NULL) &&
		(rsa->q != NULL) &&
		(rsa->dmp1 != NULL) &&
		(rsa->dmq1 != NULL) &&
		(rsa->iqmp != NULL)) )
		{ 
		if (!rsa->meth->rsa_mod_exp(ret, f, rsa, ctx)) goto err;
		}
	else
		{
		BIGNUM local_d;
		BIGNUM *d = NULL;
		
		if (!(rsa->flags & RSA_FLAG_NO_CONSTTIME))
			{
			BN_init(&local_d);
			d = &local_d;
			BN_with_flags(d, rsa->d, BN_FLG_CONSTTIME);
			}
		else
			d= rsa->d;

		if (rsa->flags & RSA_FLAG_CACHE_PUBLIC)
			if(!BN_MONT_CTX_set_locked(&rsa->_method_mod_n, CRYPTO_LOCK_RSA, rsa->n, ctx))
				goto err;

		if (!rsa->meth->bn_mod_exp(ret,f,d,rsa->n,ctx,
				rsa->_method_mod_n)) goto err;
		}

	if (blinding)
		if (!rsa_blinding_invert(blinding, local_blinding, ret, br, ctx))
			goto err;

	if (padding == RSA_X931_PADDING)
		{
		BN_sub(f, rsa->n, ret);
		if (BN_cmp(ret, f))
			res = f;
		else
			res = ret;
		}
	else
		res = ret;

	/* put in leading 0 bytes if the number is less than the
	 * length of the modulus */
	j=BN_num_bytes(res);
	i=BN_bn2bin(res,&(to[num-j]));
	for (k=0; k<(num-i); k++)
		to[k]=0;

	r=num;
err:
	if (ctx != NULL)
		{
		BN_CTX_end(ctx);
		BN_CTX_free(ctx);
		}
	if (buf != NULL)
		{
		OPENSSL_cleanse(buf,num);
		OPENSSL_free(buf);
		}
	return(r);
	}

开发者ID:repos-holder，项目名称:openbsd-patches，代码行数:101，代码来源:rsa_eay.c

示例10: eay_dh_generate_key

static int
eay_dh_generate_key(DH *dh)
{
	int ok = 0;
	int generate_new_key = 0;
	unsigned l;
	BN_CTX *ctx;

#if 0
	BN_MONT_CTX *mont = NULL;
#endif
	BIGNUM *pub_key = NULL, *priv_key = NULL;

	ctx = BN_CTX_new();
	if (ctx == NULL) {
		goto err;
	}

	if (dh->priv_key == NULL) {
		priv_key = BN_new();
		if (priv_key == NULL) {
			goto err;
		}
		generate_new_key = 1;
	} else{
		priv_key = dh->priv_key;
	}

	if (dh->pub_key == NULL) {
		pub_key = BN_new();
		if (pub_key == NULL) {
			goto err;
		}
	} else{
		pub_key = dh->pub_key;
	}


#if 0
	if (dh->flags & DH_FLAG_CACHE_MONT_P) {
		mont = BN_MONT_CTX_set_locked(&dh->method_mont_p,
			CRYPTO_LOCK_DH, dh->p, ctx);
		if (!mont) {
			goto err;
		}
	}
#endif

	if (generate_new_key) {
		l = dh->length ? dh->length : BN_num_bits(dh->p) - 1; /* secret exponent length */
		if (!BN_rand(priv_key, l, 0, 0)) {
			goto err;
		}
	}

	{
		BIGNUM local_prk;
		BIGNUM *prk;

#if 0
		if ((dh->flags & DH_FLAG_NO_EXP_CONSTTIME) == 0) {
			BN_init(&local_prk);
			prk = &local_prk;
			BN_with_flags(prk, priv_key, BN_FLG_CONSTTIME);
		} else
#endif
		prk = priv_key;

		if (!dh->meth->bn_mod_exp(dh, pub_key, dh->g, prk, dh->p, ctx /* , mont */)) {
			goto err;
		}
	}

	dh->pub_key = pub_key;
	dh->priv_key = priv_key;
	ok = 1;
err:

	/*
	 * if (ok != 1)
	 *      DHerr(DH_F_GENERATE_KEY,ERR_R_BN_LIB);
	 */

	if ((pub_key != NULL) && (dh->pub_key == NULL)) {
		BN_clear_free(pub_key);
	}
	if ((priv_key != NULL) && (dh->priv_key == NULL)) {
		BN_clear_free(priv_key);
	}
	BN_CTX_free(ctx);
	return (ok);
}

开发者ID:GarthSnyder，项目名称:apple，代码行数:92，代码来源:ossl-dh-eay.c

示例11: rsa_ossl_mod_exp

static int rsa_ossl_mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa, BN_CTX *ctx)
{
    BIGNUM *r1, *m1, *vrfy;
    int ret = 0;

    BN_CTX_start(ctx);

    r1 = BN_CTX_get(ctx);
    m1 = BN_CTX_get(ctx);
    vrfy = BN_CTX_get(ctx);

    {
        BIGNUM *local_p = NULL, *local_q = NULL;
        BIGNUM *p = NULL, *q = NULL;

        /*
         * Make sure BN_mod_inverse in Montgomery initialization uses the
         * BN_FLG_CONSTTIME flag (unless RSA_FLAG_NO_CONSTTIME is set)
         */
        if (!(rsa->flags & RSA_FLAG_NO_CONSTTIME)) {
            local_p = p = BN_new();
            if (p == NULL)
                goto err;
            BN_with_flags(p, rsa->p, BN_FLG_CONSTTIME);

            local_q = q = BN_new();
            if (q == NULL) {
                BN_free(local_p);
                goto err;
            }
            BN_with_flags(q, rsa->q, BN_FLG_CONSTTIME);
        } else {
            p = rsa->p;
            q = rsa->q;
        }

        if (rsa->flags & RSA_FLAG_CACHE_PRIVATE) {
            if (!BN_MONT_CTX_set_locked
                (&rsa->_method_mod_p, CRYPTO_LOCK_RSA, p, ctx)
                || !BN_MONT_CTX_set_locked(&rsa->_method_mod_q,
                                           CRYPTO_LOCK_RSA, q, ctx)) {
                BN_free(local_p);
                BN_free(local_q);
                goto err;
            }
        }
        /*
         * We MUST free local_p and local_q before any further use of rsa->p and
         * rsa->q
         */
        BN_free(local_p);
        BN_free(local_q);
    }

    if (rsa->flags & RSA_FLAG_CACHE_PUBLIC)
        if (!BN_MONT_CTX_set_locked
            (&rsa->_method_mod_n, CRYPTO_LOCK_RSA, rsa->n, ctx))
            goto err;

    /* compute I mod q */
    {
        BIGNUM *local_c = NULL;
        const BIGNUM *c;
        if (!(rsa->flags & RSA_FLAG_NO_CONSTTIME)) {
            local_c = BN_new();
            if (local_c == NULL)
                goto err;
            BN_with_flags(local_c, I, BN_FLG_CONSTTIME);
            c = local_c;
        } else {
            c = I;
        }
        if (!BN_mod(r1, c, rsa->q, ctx)) {
            BN_free(local_c);
            goto err;
        }

        {
            BIGNUM *local_dmq1 = NULL, *dmq1;
            /* compute r1^dmq1 mod q */
            if (!(rsa->flags & RSA_FLAG_NO_CONSTTIME)) {
                dmq1 = local_dmq1 = BN_new();
                if (local_dmq1 == NULL) {
                    BN_free(local_c);
                    goto err;
                }
                BN_with_flags(dmq1, rsa->dmq1, BN_FLG_CONSTTIME);
            } else {
                dmq1 = rsa->dmq1;
            }
            if (!rsa->meth->bn_mod_exp(m1, r1, dmq1, rsa->q, ctx,
                rsa->_method_mod_q)) {
                BN_free(local_c);
                BN_free(local_dmq1);
                goto err;
            }
            /* We MUST free local_dmq1 before any further use of rsa->dmq1 */
            BN_free(local_dmq1);
        }

//.........这里部分代码省略.........

开发者ID:DarovskikhAndrei，项目名称:openssl，代码行数:101，代码来源:rsa_ossl.c

示例12: rsa_default_verify_raw

int rsa_default_verify_raw(RSA *rsa, size_t *out_len, uint8_t *out,
                           size_t max_out, const uint8_t *in, size_t in_len,
                           int padding) {
  const unsigned rsa_size = RSA_size(rsa);
  BIGNUM *f, *result;
  int ret = 0;
  int r = -1;
  uint8_t *buf = NULL;
  BN_CTX *ctx = NULL;

  if (BN_num_bits(rsa->n) > OPENSSL_RSA_MAX_MODULUS_BITS) {
    OPENSSL_PUT_ERROR(RSA, RSA_R_MODULUS_TOO_LARGE);
    return 0;
  }

  if (BN_ucmp(rsa->n, rsa->e) <= 0) {
    OPENSSL_PUT_ERROR(RSA, RSA_R_BAD_E_VALUE);
    return 0;
  }

  if (max_out < rsa_size) {
    OPENSSL_PUT_ERROR(RSA, RSA_R_OUTPUT_BUFFER_TOO_SMALL);
    return 0;
  }

  /* for large moduli, enforce exponent limit */
  if (BN_num_bits(rsa->n) > OPENSSL_RSA_SMALL_MODULUS_BITS &&
      BN_num_bits(rsa->e) > OPENSSL_RSA_MAX_PUBEXP_BITS) {
    OPENSSL_PUT_ERROR(RSA, RSA_R_BAD_E_VALUE);
    return 0;
  }

  ctx = BN_CTX_new();
  if (ctx == NULL) {
    goto err;
  }

  BN_CTX_start(ctx);
  f = BN_CTX_get(ctx);
  result = BN_CTX_get(ctx);
  if (padding == RSA_NO_PADDING) {
    buf = out;
  } else {
    /* Allocate a temporary buffer to hold the padded plaintext. */
    buf = OPENSSL_malloc(rsa_size);
    if (buf == NULL) {
      OPENSSL_PUT_ERROR(RSA, ERR_R_MALLOC_FAILURE);
      goto err;
    }
  }
  if (!f || !result) {
    OPENSSL_PUT_ERROR(RSA, ERR_R_MALLOC_FAILURE);
    goto err;
  }

  if (in_len != rsa_size) {
    OPENSSL_PUT_ERROR(RSA, RSA_R_DATA_LEN_NOT_EQUAL_TO_MOD_LEN);
    goto err;
  }

  if (BN_bin2bn(in, in_len, f) == NULL) {
    goto err;
  }

  if (BN_ucmp(f, rsa->n) >= 0) {
    OPENSSL_PUT_ERROR(RSA, RSA_R_DATA_TOO_LARGE_FOR_MODULUS);
    goto err;
  }

  if (rsa->flags & RSA_FLAG_CACHE_PUBLIC) {
    if (BN_MONT_CTX_set_locked(&rsa->mont_n, &rsa->lock, rsa->n, ctx) == NULL) {
      goto err;
    }
  }

  if (!rsa->meth->bn_mod_exp(result, f, rsa->e, rsa->n, ctx, rsa->mont_n)) {
    goto err;
  }

  if (!BN_bn2bin_padded(buf, rsa_size, result)) {
    OPENSSL_PUT_ERROR(RSA, ERR_R_INTERNAL_ERROR);
    goto err;
  }

  switch (padding) {
    case RSA_PKCS1_PADDING:
      r = RSA_padding_check_PKCS1_type_1(out, rsa_size, buf, rsa_size);
      break;
    case RSA_NO_PADDING:
      r = rsa_size;
      break;
    default:
      OPENSSL_PUT_ERROR(RSA, RSA_R_UNKNOWN_PADDING_TYPE);
      goto err;
  }

  if (r < 0) {
    OPENSSL_PUT_ERROR(RSA, RSA_R_PADDING_CHECK_FAILED);
  } else {
    *out_len = r;
//.........这里部分代码省略.........

开发者ID:Crawping，项目名称:chromium_extract，代码行数:101，代码来源:rsa_impl.c

示例13: dsa_do_verify

static int dsa_do_verify(const unsigned char *dgst, int dgst_len, DSA_SIG *sig,
      DSA *dsa)
  {
  BN_CTX *ctx;
  BIGNUM u1,u2,t1;
  BN_MONT_CTX *mont=NULL;
  int ret = -1;
  if (!dsa->p || !dsa->q || !dsa->g)
    {
    DSAerr(DSA_F_DSA_DO_VERIFY,DSA_R_MISSING_PARAMETERS);
    return -1;
    }

  BN_init(&u1);
  BN_init(&u2);
  BN_init(&t1);

  if ((ctx=BN_CTX_new()) == NULL) goto err;

  if (BN_is_zero(sig->r) || BN_is_negative(sig->r) ||
      BN_ucmp(sig->r, dsa->q) >= 0)
    {
    ret = 0;
    goto err;
    }
  if (BN_is_zero(sig->s) || BN_is_negative(sig->s) ||
      BN_ucmp(sig->s, dsa->q) >= 0)
    {
    ret = 0;
    goto err;
    }

  /* Calculate W = inv(S) mod Q
   * save W in u2 */
  if ((BN_mod_inverse(&u2,sig->s,dsa->q,ctx)) == NULL) goto err;

  /* save M in u1 */
  if (BN_bin2bn(dgst,dgst_len,&u1) == NULL) goto err;

  /* u1 = M * w mod q */
  if (!BN_mod_mul(&u1,&u1,&u2,dsa->q,ctx)) goto err;

  /* u2 = r * w mod q */
  if (!BN_mod_mul(&u2,sig->r,&u2,dsa->q,ctx)) goto err;


  if (dsa->flags & DSA_FLAG_CACHE_MONT_P)
    {
    mont = BN_MONT_CTX_set_locked(&dsa->method_mont_p,
          CRYPTO_LOCK_DSA, dsa->p, ctx);
    if (!mont)
      goto err;
    }


  DSA_MOD_EXP(goto err, dsa, &t1, dsa->g, &u1, dsa->pub_key, &u2, dsa->p, ctx, mont);
  /* BN_copy(&u1,&t1); */
  /* let u1 = u1 mod q */
  if (!BN_mod(&u1,&t1,dsa->q,ctx)) goto err;

  /* V is now in u1.  If the signature is correct, it will be
   * equal to R. */
  ret=(BN_ucmp(&u1, sig->r) == 0);

  err:
  /* XXX: surely this is wrong - if ret is 0, it just didn't verify;
     there is no error in BN. Test should be ret == -1 (Ben) */
  if (ret != 1) DSAerr(DSA_F_DSA_DO_VERIFY,ERR_R_BN_LIB);
  if (ctx != NULL) BN_CTX_free(ctx);
  BN_free(&u1);
  BN_free(&u2);
  BN_free(&t1);
  return(ret);
  }

开发者ID:yyyyyao，项目名称:Slicer3-lib-mirrors，代码行数:74，代码来源:dsa_ossl.c

示例14: dsa_sign_setup

static int dsa_sign_setup(DSA *dsa, BN_CTX *ctx_in, BIGNUM **kinvp, BIGNUM **rp)
  {
  BN_CTX *ctx;
  BIGNUM k,kq,*K,*kinv=NULL,*r=NULL;
  int ret=0;

  if (!dsa->p || !dsa->q || !dsa->g)
    {
    DSAerr(DSA_F_DSA_SIGN_SETUP,DSA_R_MISSING_PARAMETERS);
    return 0;
    }

  BN_init(&k);
  BN_init(&kq);

  if (ctx_in == NULL)
    {
    if ((ctx=BN_CTX_new()) == NULL) goto err;
    }
  else
    ctx=ctx_in;

  if ((r=BN_new()) == NULL) goto err;

  /* Get random k */
  do
    if (!BN_rand_range(&k, dsa->q)) goto err;
  while (BN_is_zero(&k));
  if ((dsa->flags & DSA_FLAG_NO_EXP_CONSTTIME) == 0)
    {
    BN_set_flags(&k, BN_FLG_EXP_CONSTTIME);
    }

  if (dsa->flags & DSA_FLAG_CACHE_MONT_P)
    {
    if (!BN_MONT_CTX_set_locked(&dsa->method_mont_p,
            CRYPTO_LOCK_DSA,
            dsa->p, ctx))
      goto err;
    }

  /* Compute r = (g^k mod p) mod q */

  if ((dsa->flags & DSA_FLAG_NO_EXP_CONSTTIME) == 0)
    {
    if (!BN_copy(&kq, &k)) goto err;

    /* We do not want timing information to leak the length of k,
     * so we compute g^k using an equivalent exponent of fixed length.
     *
     * (This is a kludge that we need because the BN_mod_exp_mont()
     * does not let us specify the desired timing behaviour.) */

    if (!BN_add(&kq, &kq, dsa->q)) goto err;
    if (BN_num_bits(&kq) <= BN_num_bits(dsa->q))
      {
      if (!BN_add(&kq, &kq, dsa->q)) goto err;
      }

    K = &kq;
    }
  else
    {
    K = &k;
    }
  DSA_BN_MOD_EXP(goto err, dsa, r, dsa->g, K, dsa->p, ctx,
      dsa->method_mont_p);
  if (!BN_mod(r,r,dsa->q,ctx)) goto err;

  /* Compute  part of 's = inv(k) (m + xr) mod q' */
  if ((kinv=BN_mod_inverse(NULL,&k,dsa->q,ctx)) == NULL) goto err;

  if (*kinvp != NULL) BN_clear_free(*kinvp);
  *kinvp=kinv;
  kinv=NULL;
  if (*rp != NULL) BN_clear_free(*rp);
  *rp=r;
  ret=1;
err:
  if (!ret)
    {
    DSAerr(DSA_F_DSA_SIGN_SETUP,ERR_R_BN_LIB);
    if (kinv != NULL) BN_clear_free(kinv);
    if (r != NULL) BN_clear_free(r);
    }
  if (ctx_in == NULL) BN_CTX_free(ctx);
  if (kinv != NULL) BN_clear_free(kinv);
  BN_clear_free(&k);
  BN_clear_free(&kq);
  return(ret);
  }

开发者ID:yyyyyao，项目名称:Slicer3-lib-mirrors，代码行数:91，代码来源:dsa_ossl.c

示例15: dsa_do_verify

static int dsa_do_verify(const unsigned char *dgst, int dgst_len, DSA_SIG *sig,
		  DSA *dsa)
	{
	BN_CTX *ctx;
	BIGNUM u1,u2,t1;
	BN_MONT_CTX *mont=NULL;
	int ret = -1;
	if (!dsa->p || !dsa->q || !dsa->g)
		{
		DSAerr(DSA_F_DSA_DO_VERIFY,DSA_R_MISSING_PARAMETERS);
		return -1;
		}

	if (BN_num_bits(dsa->q) != 160)
		{
		DSAerr(DSA_F_DSA_DO_VERIFY,DSA_R_BAD_Q_VALUE);
		return -1;
		}

	if (BN_num_bits(dsa->p) > OPENSSL_DSA_MAX_MODULUS_BITS)
		{
		DSAerr(DSA_F_DSA_DO_VERIFY,DSA_R_MODULUS_TOO_LARGE);
		return -1;
		}

	BN_init(&u1);
	BN_init(&u2);
	BN_init(&t1);

	if ((ctx=BN_CTX_new()) == NULL) goto err;

	if (BN_is_zero(sig->r) || sig->r->neg || BN_ucmp(sig->r, dsa->q) >= 0)
		{
		ret = 0;
		goto err;
		}
	if (BN_is_zero(sig->s) || sig->s->neg || BN_ucmp(sig->s, dsa->q) >= 0)
		{
		ret = 0;
		goto err;
		}

	/* Calculate W = inv(S) mod Q
	 * save W in u2 */
	if ((BN_mod_inverse(&u2,sig->s,dsa->q,ctx)) == NULL) goto err;

	/* save M in u1 */
	if (BN_bin2bn(dgst,dgst_len,&u1) == NULL) goto err;

	/* u1 = M * w mod q */
	if (!BN_mod_mul(&u1,&u1,&u2,dsa->q,ctx)) goto err;

	/* u2 = r * w mod q */
	if (!BN_mod_mul(&u2,sig->r,&u2,dsa->q,ctx)) goto err;


	if (dsa->flags & DSA_FLAG_CACHE_MONT_P)
		{
		mont = BN_MONT_CTX_set_locked(
					(BN_MONT_CTX **)&dsa->method_mont_p,
					CRYPTO_LOCK_DSA, dsa->p, ctx);
		if (!mont)
			goto err;
		}

#if 0
	{
	BIGNUM t2;

	BN_init(&t2);
	/* v = ( g^u1 * y^u2 mod p ) mod q */
	/* let t1 = g ^ u1 mod p */
	if (!BN_mod_exp_mont(&t1,dsa->g,&u1,dsa->p,ctx,mont)) goto err;
	/* let t2 = y ^ u2 mod p */
	if (!BN_mod_exp_mont(&t2,dsa->pub_key,&u2,dsa->p,ctx,mont)) goto err;
	/* let u1 = t1 * t2 mod p */
	if (!BN_mod_mul(&u1,&t1,&t2,dsa->p,ctx)) goto err_bn;
	BN_free(&t2);
	}
	/* let u1 = u1 mod q */
	if (!BN_mod(&u1,&u1,dsa->q,ctx)) goto err;
#else
	{
	if (!dsa->meth->dsa_mod_exp(dsa, &t1,dsa->g,&u1,dsa->pub_key,&u2,
						dsa->p,ctx,mont)) goto err;
	/* BN_copy(&u1,&t1); */
	/* let u1 = u1 mod q */
	if (!BN_mod(&u1,&t1,dsa->q,ctx)) goto err;
	}
#endif
	/* V is now in u1.  If the signature is correct, it will be
	 * equal to R. */
	ret=(BN_ucmp(&u1, sig->r) == 0);

	err:
	if (ret != 1) DSAerr(DSA_F_DSA_DO_VERIFY,ERR_R_BN_LIB);
	if (ctx != NULL) BN_CTX_free(ctx);
	BN_free(&u1);
	BN_free(&u2);
	BN_free(&t1);
//.........这里部分代码省略.........

开发者ID:aosm，项目名称:OpenSSL097，代码行数:101，代码来源:dsa_ossl.c

示例16: mod_exp

static int mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa, BN_CTX *ctx) {
  BIGNUM *r1, *m1, *vrfy;
  BIGNUM local_dmp1, local_dmq1, local_c, local_r1;
  BIGNUM *dmp1, *dmq1, *c, *pr1;
  int ret = 0;
  size_t i, num_additional_primes = 0;

  if (rsa->additional_primes != NULL) {
    num_additional_primes = sk_RSA_additional_prime_num(rsa->additional_primes);
  }

  BN_CTX_start(ctx);
  r1 = BN_CTX_get(ctx);
  m1 = BN_CTX_get(ctx);
  vrfy = BN_CTX_get(ctx);

  {
    BIGNUM local_p, local_q;
    BIGNUM *p = NULL, *q = NULL;

    /* Make sure BN_mod_inverse in Montgomery intialization uses the
     * BN_FLG_CONSTTIME flag (unless RSA_FLAG_NO_CONSTTIME is set) */
    BN_init(&local_p);
    p = &local_p;
    BN_with_flags(p, rsa->p, BN_FLG_CONSTTIME);

    BN_init(&local_q);
    q = &local_q;
    BN_with_flags(q, rsa->q, BN_FLG_CONSTTIME);

    if (rsa->flags & RSA_FLAG_CACHE_PRIVATE) {
      if (BN_MONT_CTX_set_locked(&rsa->_method_mod_p, &rsa->lock, p, ctx) ==
          NULL) {
        goto err;
      }
      if (BN_MONT_CTX_set_locked(&rsa->_method_mod_q, &rsa->lock, q, ctx) ==
          NULL) {
        goto err;
      }
    }
  }

  if (rsa->flags & RSA_FLAG_CACHE_PUBLIC) {
    if (BN_MONT_CTX_set_locked(&rsa->_method_mod_n, &rsa->lock, rsa->n, ctx) ==
        NULL) {
      goto err;
    }
  }

  /* compute I mod q */
  c = &local_c;
  BN_with_flags(c, I, BN_FLG_CONSTTIME);
  if (!BN_mod(r1, c, rsa->q, ctx)) {
    goto err;
  }

  /* compute r1^dmq1 mod q */
  dmq1 = &local_dmq1;
  BN_with_flags(dmq1, rsa->dmq1, BN_FLG_CONSTTIME);
  if (!rsa->meth->bn_mod_exp(m1, r1, dmq1, rsa->q, ctx, rsa->_method_mod_q)) {
    goto err;
  }

  /* compute I mod p */
  c = &local_c;
  BN_with_flags(c, I, BN_FLG_CONSTTIME);
  if (!BN_mod(r1, c, rsa->p, ctx)) {
    goto err;
  }

  /* compute r1^dmp1 mod p */
  dmp1 = &local_dmp1;
  BN_with_flags(dmp1, rsa->dmp1, BN_FLG_CONSTTIME);
  if (!rsa->meth->bn_mod_exp(r0, r1, dmp1, rsa->p, ctx, rsa->_method_mod_p)) {
    goto err;
  }

  if (!BN_sub(r0, r0, m1)) {
    goto err;
  }
  /* This will help stop the size of r0 increasing, which does
   * affect the multiply if it optimised for a power of 2 size */
  if (BN_is_negative(r0)) {
    if (!BN_add(r0, r0, rsa->p)) {
      goto err;
    }
  }

  if (!BN_mul(r1, r0, rsa->iqmp, ctx)) {
    goto err;
  }

  /* Turn BN_FLG_CONSTTIME flag on before division operation */
  pr1 = &local_r1;
  BN_with_flags(pr1, r1, BN_FLG_CONSTTIME);

  if (!BN_mod(r0, pr1, rsa->p, ctx)) {
    goto err;
  }

//.........这里部分代码省略.........

开发者ID:luocn99，项目名称:ssl，代码行数:101，代码来源:my_engine.c

示例17: my_encrypt

static int my_encrypt(RSA *rsa, size_t *out_len, uint8_t *out, size_t max_out,
                   const uint8_t *in, size_t in_len, int padding) {
  const unsigned rsa_size = RSA_size(rsa);
  BIGNUM *f, *result;
  uint8_t *buf = NULL;
  BN_CTX *ctx = NULL;
  int i, ret = 0;
  printf("my encrypt\n");
  if (rsa_size > OPENSSL_RSA_MAX_MODULUS_BITS) {
    OPENSSL_PUT_ERROR(RSA, RSA_R_MODULUS_TOO_LARGE);
    return 0;
  }

  if (max_out < rsa_size) {
    OPENSSL_PUT_ERROR(RSA, RSA_R_OUTPUT_BUFFER_TOO_SMALL);
    return 0;
  }

  if (BN_ucmp(rsa->n, rsa->e) <= 0) {
    OPENSSL_PUT_ERROR(RSA, RSA_R_BAD_E_VALUE);
    return 0;
  }

  /* for large moduli, enforce exponent limit */
  if (BN_num_bits(rsa->n) > OPENSSL_RSA_SMALL_MODULUS_BITS &&
      BN_num_bits(rsa->e) > OPENSSL_RSA_MAX_PUBEXP_BITS) {
    OPENSSL_PUT_ERROR(RSA, RSA_R_BAD_E_VALUE);
    return 0;
  }

  ctx = BN_CTX_new();
  if (ctx == NULL) {
    goto err;
  }

  BN_CTX_start(ctx);
  f = BN_CTX_get(ctx);
  result = BN_CTX_get(ctx);
  buf = OPENSSL_malloc(rsa_size);
  if (!f || !result || !buf) {
    OPENSSL_PUT_ERROR(RSA, ERR_R_MALLOC_FAILURE);
    goto err;
  }

  switch (padding) {
    case RSA_PKCS1_PADDING:
      i = RSA_padding_add_PKCS1_type_2(buf, rsa_size, in, in_len);
      break;
    case RSA_PKCS1_OAEP_PADDING:
      /* Use the default parameters: SHA-1 for both hashes and no label. */
      i = RSA_padding_add_PKCS1_OAEP_mgf1(buf, rsa_size, in, in_len,
                                          NULL, 0, NULL, NULL);
      break;
    case RSA_NO_PADDING:
      i = RSA_padding_add_none(buf, rsa_size, in, in_len);
      break;
    default:
      OPENSSL_PUT_ERROR(RSA, RSA_R_UNKNOWN_PADDING_TYPE);
      goto err;
  }

  if (i <= 0) {
    goto err;
  }

  if (BN_bin2bn(buf, rsa_size, f) == NULL) {
    goto err;
  }

  if (BN_ucmp(f, rsa->n) >= 0) {
    /* usually the padding functions would catch this */
    OPENSSL_PUT_ERROR(RSA, RSA_R_DATA_TOO_LARGE_FOR_MODULUS);
    goto err;
  }

  if (rsa->flags & RSA_FLAG_CACHE_PUBLIC) {
    if (BN_MONT_CTX_set_locked(&rsa->_method_mod_n, &rsa->lock, rsa->n, ctx) ==
        NULL) {
      goto err;
    }
  }

  printf("before my bn_mod_exp\n");

  if (!rsa->meth->bn_mod_exp(result, f, rsa->e, rsa->n, ctx,
                             rsa->_method_mod_n)) {
    goto err;
  }
  printf("after my bn_mod_exp\n");

  /* put in leading 0 bytes if the number is less than the length of the
   * modulus */
  if (!BN_bn2bin_padded(out, rsa_size, result)) {
    OPENSSL_PUT_ERROR(RSA, ERR_R_INTERNAL_ERROR);
    goto err;
  }

  *out_len = rsa_size;
  ret = 1;

//.........这里部分代码省略.........

开发者ID:luocn99，项目名称:ssl，代码行数:101，代码来源:my_engine.c

示例18: rsa_ossl_private_encrypt

/* signing */
static int rsa_ossl_private_encrypt(int flen, const unsigned char *from,
                                   unsigned char *to, RSA *rsa, int padding)
{
    BIGNUM *f, *ret, *res;
    int i, j, k, num = 0, r = -1;
    unsigned char *buf = NULL;
    BN_CTX *ctx = NULL;
    int local_blinding = 0;
    /*
     * Used only if the blinding structure is shared. A non-NULL unblind
     * instructs rsa_blinding_convert() and rsa_blinding_invert() to store
     * the unblinding factor outside the blinding structure.
     */
    BIGNUM *unblind = NULL;
    BN_BLINDING *blinding = NULL;

    if ((ctx = BN_CTX_new()) == NULL)
        goto err;
    BN_CTX_start(ctx);
    f = BN_CTX_get(ctx);
    ret = BN_CTX_get(ctx);
    num = BN_num_bytes(rsa->n);
    buf = OPENSSL_malloc(num);
    if (ret == NULL || buf == NULL) {
        RSAerr(RSA_F_RSA_OSSL_PRIVATE_ENCRYPT, ERR_R_MALLOC_FAILURE);
        goto err;
    }

    switch (padding) {
    case RSA_PKCS1_PADDING:
        i = RSA_padding_add_PKCS1_type_1(buf, num, from, flen);
        break;
    case RSA_X931_PADDING:
        i = RSA_padding_add_X931(buf, num, from, flen);
        break;
    case RSA_NO_PADDING:
        i = RSA_padding_add_none(buf, num, from, flen);
        break;
    case RSA_SSLV23_PADDING:
    default:
        RSAerr(RSA_F_RSA_OSSL_PRIVATE_ENCRYPT, RSA_R_UNKNOWN_PADDING_TYPE);
        goto err;
    }
    if (i <= 0)
        goto err;

    if (BN_bin2bn(buf, num, f) == NULL)
        goto err;

    if (BN_ucmp(f, rsa->n) >= 0) {
        /* usually the padding functions would catch this */
        RSAerr(RSA_F_RSA_OSSL_PRIVATE_ENCRYPT,
               RSA_R_DATA_TOO_LARGE_FOR_MODULUS);
        goto err;
    }

    if (!(rsa->flags & RSA_FLAG_NO_BLINDING)) {
        blinding = rsa_get_blinding(rsa, &local_blinding, ctx);
        if (blinding == NULL) {
            RSAerr(RSA_F_RSA_OSSL_PRIVATE_ENCRYPT, ERR_R_INTERNAL_ERROR);
            goto err;
        }
    }

    if (blinding != NULL) {
        if (!local_blinding && ((unblind = BN_CTX_get(ctx)) == NULL)) {
            RSAerr(RSA_F_RSA_OSSL_PRIVATE_ENCRYPT, ERR_R_MALLOC_FAILURE);
            goto err;
        }
        if (!rsa_blinding_convert(blinding, f, unblind, ctx))
            goto err;
    }

    if ((rsa->flags & RSA_FLAG_EXT_PKEY) ||
        (rsa->version == RSA_ASN1_VERSION_MULTI) ||
        ((rsa->p != NULL) &&
         (rsa->q != NULL) &&
         (rsa->dmp1 != NULL) && (rsa->dmq1 != NULL) && (rsa->iqmp != NULL))) {
        if (!rsa->meth->rsa_mod_exp(ret, f, rsa, ctx))
            goto err;
    } else {
        BIGNUM *d = BN_new();
        if (d == NULL) {
            RSAerr(RSA_F_RSA_OSSL_PRIVATE_ENCRYPT, ERR_R_MALLOC_FAILURE);
            goto err;
        }
        BN_with_flags(d, rsa->d, BN_FLG_CONSTTIME);

        if (rsa->flags & RSA_FLAG_CACHE_PUBLIC)
            if (!BN_MONT_CTX_set_locked
                (&rsa->_method_mod_n, rsa->lock, rsa->n, ctx)) {
                BN_free(d);

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ BN_add函数代码示例发布时间：2022-05-30

C++ BN_MONT_CTX_set函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18341|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9705|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8195|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8563|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8474|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9415|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8446|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7877|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8429|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7405|2022-11-06

客服电话

电子邮件

C++ BN_MONT_CTX_set_locked函数代码示例

示例1: BN_CTX_new

示例2: compute_key

示例3: DH_compute_key

示例4: compute_key

示例5: rsa_ossl_public_encrypt

示例6: mod_exp

示例7: RSA_verify_raw

示例8: RSA_eay_public_decrypt

示例9: RSA_eay_private_encrypt

示例10: eay_dh_generate_key

示例11: rsa_ossl_mod_exp

示例12: rsa_default_verify_raw

示例13: dsa_do_verify

示例14: dsa_sign_setup

示例15: dsa_do_verify

示例16: mod_exp

示例17: my_encrypt

示例18: rsa_ossl_private_encrypt

请发表评论

全部评论

上一篇：

下一篇：

krishnaik06/Machine-Learning-in-90-days

Daemonite/material: Material Design for

美元符号为什么是“$”

dpull/lua-webclient: Nonblocking lua htt

一些脑电数据处理相关的matlab函数整理

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053