C++ BPF_STMT函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中BPF_STMT函数的典型用法代码示例。如果您正苦于以下问题：C++ BPF_STMT函数的具体用法？C++ BPF_STMT怎么用？C++ BPF_STMT使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了BPF_STMT函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: enable_setter_seccomp

/* Returns 0 if the the sandbox is enabled using
 * the time setter policy.
 */
int
enable_setter_seccomp (void)
{
  static const struct sock_filter insns[] =
  {
    /* Ensure the syscall arch convention is as expected. */
    BPF_STMT (BPF_LD+BPF_W+BPF_ABS,
    offsetof (struct seccomp_data, arch)),
    BPF_JUMP (BPF_JMP+BPF_JEQ+BPF_K, SECCOMP_AUDIT_ARCH, 1, 0),
    BPF_STMT (BPF_RET+BPF_K, SECCOMP_FILTER_FAIL),
    /* Load the syscall number for checking. */
    BPF_STMT (BPF_LD+BPF_W+BPF_ABS,
    offsetof (struct seccomp_data, nr)),

    /* Process ALLOWs as quickly as possible */
    SC_ALLOW (read),
    SC_ALLOW (write),
    SC_ALLOW (pwritev),

    SC_ALLOW (settimeofday),
    SC_ALLOW (ioctl), /* TODO(wad) filter for fd and RTC_SET_TIME */
#ifdef __NR_time /* This is required for x86 systems */
    SC_ALLOW (time),
#endif

    SC_ALLOW (lseek),
    SC_ALLOW (close),
    SC_ALLOW (munmap),

    SC_ALLOW (exit_group),
    SC_ALLOW (exit),

    SC_DENY (open, EINVAL),
    SC_DENY (fcntl, EINVAL),
    SC_DENY (fstat, EINVAL),
#ifdef __NR_mmap
    SC_DENY (mmap, EINVAL),
#endif
#ifdef __NR_mmap2
    SC_DENY (mmap2, EINVAL),
#endif
#ifdef __NR_sendto
    SC_DENY (sendto, EINVAL),
#endif
#ifdef __NR_socket
    SC_DENY (socket, EINVAL),
#endif
#ifdef __NR_socketcall
    SC_DENY (socketcall, EINVAL),
#endif
    BPF_STMT (BPF_RET+BPF_K, SECCOMP_FILTER_FAIL),
  };
  static const struct sock_fprog prog =
  {
    .len = (unsigned short) (sizeof (insns) /sizeof (insns[0])),
    .filter = (struct sock_filter *) insns,
  };
  return (prctl (PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0) ||
          prctl (PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &prog));
}

开发者ID:AlexeySalmin，项目名称:tlsdate，代码行数:63，代码来源:seccomp.c

示例2: _darwinEthernet_SetFilter

/**
 * Create the berkeley packet filter for our ethertype
 *
 * Creates a BPF for our ether type.
 *
 * @param [in,out] ether The MetisGenericEther to modify
 *
 * @retval true success
 * @retval false failure
 *
 * Example:
 * @code
 * <#example#>
 * @endcode
 */
static bool
_darwinEthernet_SetFilter(MetisGenericEther *ether)
{
    struct bpf_program filterCode = { 0 };

    // BPF instructions:
    // Load 12 to accumulator (offset of ethertype)
    // Jump Equal to netbyteorder_ethertype 0 instructions, otherwise 1 instruction
    // 0: return a length of -1 (meaning whole packet)
    // 1: return a length of 0 (meaning skip packet)
    struct bpf_insn instructions[] = {
        BPF_STMT(BPF_LD + BPF_H + BPF_ABS,  12),
        BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, 0x0801,      0,  1),
        BPF_STMT(BPF_RET + BPF_K,           (u_int) - 1),
        BPF_STMT(BPF_RET + BPF_K,           0),
    };
    //        BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, ether->ethertype, 0, 1),

    /* Set the filter */
    filterCode.bf_len = sizeof(instructions) / sizeof(struct bpf_insn);
    filterCode.bf_insns = &instructions[0];

    if (ioctl(ether->etherSocket, BIOCSETF, &filterCode) < 0) {
        return false;
    }

    return true;
}

开发者ID:isolis，项目名称:Metis，代码行数:43，代码来源:metis_GenericEther.c

示例3: filter_syscall

int filter_syscall(int syscall_nr, unsigned int flags)
{
	struct sock_filter filter[] = {
		BPF_STMT(BPF_LD+BPF_W+BPF_ABS, offsetof(struct seccomp_data, nr)),
		BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, syscall_nr, 0, 1),
		BPF_STMT(BPF_RET+BPF_K, SECCOMP_RET_KILL),
		BPF_STMT(BPF_RET+BPF_K, SECCOMP_RET_ALLOW),
	};

	struct sock_fprog bpf_prog = {
		.len = (unsigned short)(sizeof(filter)/sizeof(filter[0])),
		.filter = filter,
	};

	if (syscall(__NR_seccomp, SECCOMP_SET_MODE_FILTER, flags, &bpf_prog) < 0) {
		pr_perror("seccomp failed");
		return -1;
	}

	return 0;
}

void *wait_and_getpid(void *arg)
{
	pthread_mutex_lock(&getpid_wait);
	pthread_mutex_unlock(&getpid_wait);
	pthread_mutex_destroy(&getpid_wait);

	/* we expect the tg to get killed by the seccomp filter that was
	 * installed via TSYNC */
	ptrace(PTRACE_TRACEME);
	pthread_exit((void *)1);
}

开发者ID:0x7f454c46，项目名称:criu-1，代码行数:33，代码来源:seccomp_filter_tsync.c

示例4: netlink_install_filter

/* Filter out messages from self that occur on listener socket,
   caused by our actions on the command socket
 */
static void netlink_install_filter (int sock, __u32 pid)
{
  struct sock_filter filter[] = {
    /* 0: ldh [4]	          */
    BPF_STMT(BPF_LD|BPF_ABS|BPF_H, offsetof(struct nlmsghdr, nlmsg_type)),
    /* 1: jeq 0x18 jt 3 jf 6  */
    BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, htons(RTM_NEWROUTE), 1, 0),
    /* 2: jeq 0x19 jt 3 jf 6  */
    BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, htons(RTM_DELROUTE), 0, 3),
    /* 3: ldw [12]		  */
    BPF_STMT(BPF_LD|BPF_ABS|BPF_W, offsetof(struct nlmsghdr, nlmsg_pid)),
    /* 4: jeq XX  jt 5 jf 6   */
    BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, htonl(pid), 0, 1),
    /* 5: ret 0    (skip)     */
    BPF_STMT(BPF_RET|BPF_K, 0),
    /* 6: ret 0xffff (keep)   */
    BPF_STMT(BPF_RET|BPF_K, 0xffff),
  };

  struct sock_fprog prog = {
    .len = sizeof(filter) / sizeof(filter[0]),
    .filter = filter,
  };

  if (setsockopt(sock, SOL_SOCKET, SO_ATTACH_FILTER, &prog, sizeof(prog)) < 0)
    zlog_warn ("Can't install socket filter: %s\n", safe_strerror(errno));
}

/* Exported interface function.  This function simply calls
   netlink_socket (). */
void
kernel_init (void)
{
  unsigned long groups;

  groups = RTMGRP_LINK | RTMGRP_IPV4_ROUTE | RTMGRP_IPV4_IFADDR;
#ifdef HAVE_IPV6
  groups |= RTMGRP_IPV6_ROUTE | RTMGRP_IPV6_IFADDR;
#endif /* HAVE_IPV6 */
  netlink_socket (&netlink, groups);
  netlink_socket (&netlink_cmd, 0);

  /* Register kernel socket. */
  if (netlink.sock > 0)
    {
      /* Only want non-blocking on the netlink event socket */
      if (fcntl (netlink.sock, F_SETFL, O_NONBLOCK) < 0)
	zlog (NULL, LOG_ERR, "Can't set %s socket flags: %s", netlink.name,
		safe_strerror (errno));

      /* Set receive buffer size if it's set from command line */
      if (nl_rcvbufsize)
	netlink_recvbuf (&netlink, nl_rcvbufsize);

      netlink_install_filter (netlink.sock, netlink_cmd.snl.nl_pid);
      thread_add_read (hm->master, kernel_read, NULL, netlink.sock);
    }
}

开发者ID:rgmabs19357，项目名称:HA，代码行数:61，代码来源:rt_netlink.c

示例5: install_filter

static void
install_filter(void)
{
    struct sock_filter filter[] = {
        /* Load architecture */

        BPF_STMT(BPF_LD | BPF_W | BPF_ABS,
                (offsetof(struct seccomp_data, arch))),

        /* Kill process if the architecture is not what we expect */

        BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_K, AUDIT_ARCH_X86_64, 1, 0),
        BPF_STMT(BPF_RET | BPF_K, SECCOMP_RET_KILL),

        /* Load system call number */

        BPF_STMT(BPF_LD | BPF_W | BPF_ABS,
                 (offsetof(struct seccomp_data, nr))),

        /* Allow system calls other than open() */

        BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_K, __NR_open, 1, 0),
        BPF_STMT(BPF_RET | BPF_K, SECCOMP_RET_ALLOW),

        /* Kill process on open() */

        BPF_STMT(BPF_RET | BPF_K, SECCOMP_RET_KILL)
    };

    struct sock_fprog prog = {
        .len = (unsigned short) (sizeof(filter) / sizeof(filter[0])),
        .filter = filter,
    };

    if (seccomp(SECCOMP_SET_MODE_FILTER, 0, &prog) == -1)
        errExit("seccomp");
    /* On Linux 3.16 and earlier, we must instead use:
            if (prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &prog))
                errExit("prctl-PR_SET_SECCOMP");
    */
}

int
main(int argc, char **argv)
{
    if (prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0))
        errExit("prctl");

    install_filter();

    if (open("/tmp/a", O_RDONLY) == -1)
        errExit("open");

    printf("We shouldn't see this message\n");

    exit(EXIT_SUCCESS);
}

开发者ID:Heuristack，项目名称:Productivity，代码行数:57，代码来源:seccomp_deny_open.c

示例6: install_filter

static void install_filter(void) {
  struct sock_filter filter[] = {
    /* Load system call number from 'seccomp_data' buffer into
       accumulator */
    BPF_STMT(BPF_LD | BPF_W | BPF_ABS, offsetof(struct seccomp_data, nr)),
    /* Jump forward 1 instruction if system call number
       is not SYS_pipe */
    BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_K, SYS_pipe, 0, 1),
    /* Error out with ESRCH */
    BPF_STMT(BPF_RET | BPF_K, SECCOMP_RET_ERRNO | (ESRCH & SECCOMP_RET_DATA)),
    /* Jump forward 1 instruction if system call number
       is not SYS_geteuid */
    BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_K, SYS_geteuid, 0, 1),
    /* Trigger SIGSYS */
    BPF_STMT(BPF_RET | BPF_K, SECCOMP_RET_TRAP),
    /* Jump forward 1 instruction if system call number
       is not SYS_open */
    BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_K, SYS_open, 0, 1),
    /* Trigger SIGSYS */
    BPF_STMT(BPF_RET | BPF_K, SECCOMP_RET_TRAP),
    /* Jump forward 1 instruction if system call number
       is not SYS_rrcall_init_buffers */
    BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_K, SYS_rrcall_init_buffers, 0, 1),
    /* Trigger SIGSYS */
    BPF_STMT(BPF_RET | BPF_K, SECCOMP_RET_TRAP),
    /* Jump forward 1 instruction if system call number
       is not SYS_ioctl */
    BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_K, SYS_ioctl, 0, 1),
    /* Trigger SIGSYS */
    BPF_STMT(BPF_RET | BPF_K, SECCOMP_RET_TRAP),
    /* Destination of system call number mismatch: allow other
       system calls */
    BPF_STMT(BPF_RET | BPF_K, SECCOMP_RET_ALLOW)
  };
  struct sock_fprog prog = {
    .len = (unsigned short)(sizeof(filter) / sizeof(filter[0])),
    .filter = filter,
  };
  int ret;

  ret = syscall(RR_seccomp, SECCOMP_SET_MODE_FILTER, 0, &prog);
  if (ret == -1 && errno == ENOSYS) {
    ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &prog);
  }
  test_assert(ret == 0);
}

static void* waiting_thread(void* p) {
  char buf;
  test_assert(1 == read(pipe_fds[0], &buf, 1));
  /* Check this thread wasn't affected by the SET_SECCOMP */
  test_assert(0 == prctl(PR_GET_SECCOMP));
  return NULL;
}

开发者ID:nbp，项目名称:rr，代码行数:54，代码来源:seccomp.c

示例7: main

int main(int argc, char *argv[])
{
    pid_t pid;

    struct sock_filter filter[] = {
        /* Load architecture */
        BPF_STMT(BPF_LD+BPF_W+BPF_ABS, (offsetof(struct seccomp_data, arch))),

        /* Kill process if the architecture is not what we expect */
        /* AUDIT_ARCH_X86_64 or AUDIT_ARCH_I386 */
        BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, AUDIT_ARCH_X86_64, 1, 0),
        BPF_STMT(BPF_RET+BPF_K, SECCOMP_RET_KILL),

        /* Load system call number */
        BPF_STMT(BPF_LD+BPF_W+BPF_ABS, (offsetof(struct seccomp_data, nr))),

        /* Allow system calls other than open() */
        BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, __NR_open, 1, 0),
        BPF_STMT(BPF_RET+BPF_K, SECCOMP_RET_ALLOW),

        /* Kill process on open() */
        BPF_STMT(BPF_RET+BPF_K, SECCOMP_RET_KILL)
    };

    struct sock_fprog prog = {
        .len = (unsigned short) (sizeof(filter) / sizeof(filter[0])),
        .filter = filter,
    };

    printf("\n*** Appling BPF filter ***\n\n");
    if (prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0))
        perror("prctl");
    if (prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &prog))
        perror("seccomp");

    pid=fork();
    if(pid==0)
    {
        printf("I am the child\n");
        printf("The PID of child is %d\n",getpid());
        printf("The PID of parent of child is %d\n\n",getppid());
    }
    else
    {
        printf("I am the parent\n");
        printf("The PID of parent is %d\n",getpid());
        printf("The PID of parent of parent is %d\n\n",getppid());        
    }

    exit(EXIT_SUCCESS);
}

开发者ID:xlpiao，项目名称:code，代码行数:51，代码来源:example03.c

示例8: _open_socket

static int
_open_socket(const char *device)
{
    int etherSocket;

    etherSocket = _open_bpf_device();
    if (etherSocket == -1) {
        perror("bpf");
        return -1;
    }

    // Attach the requested interface
    struct ifreq if_idx = { {0} };
    strncpy(if_idx.ifr_name, device, strlen(device) + 1);
    if (ioctl(etherSocket, BIOCSETIF, &if_idx)) {
        perror("BIOCSETIF");
        return -1;
    }

    // Set immediate read on packet reception
    uint32_t on = 1;
    if (ioctl(etherSocket, BIOCIMMEDIATE, &on)) {
        perror("BIOCIMMEDIATE");
        return -1;
    }

    // Setup the BPF filter for CCNX_ETHERTYPE
    struct bpf_program filterCode = { 0 };

    // BPF instructions:
    // Load 12 to accumulator (offset of ethertype)
    // Jump Equal to netbyteorder_ethertype 0 instructions, otherwise 1 instruction
    // 0: return a length of -1 (meaning whole packet)
    // 1: return a length of 0 (meaning skip packet)
    struct bpf_insn instructions[] = {
        BPF_STMT(BPF_LD + BPF_H + BPF_ABS,  12),
        BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, CCNX_ETHERTYPE,0,  1),
        BPF_STMT(BPF_RET + BPF_K,           (u_int) - 1),
        BPF_STMT(BPF_RET + BPF_K,           0),
    };

    // Install the filter
    filterCode.bf_len = sizeof(instructions) / sizeof(struct bpf_insn);
    filterCode.bf_insns = &instructions[0];
    if (ioctl(etherSocket, BIOCSETF, &filterCode) < 0) {
        perror("BIOCSETF");
        return -1;
    }

    return etherSocket;
}

开发者ID:chris-wood，项目名称:ghost，代码行数:51，代码来源:athena_Ethernet.c

示例9: load_arp_bpflet

static int load_arp_bpflet(int fd)
{
	static struct sock_filter insns[] = {
		BPF_STMT(BPF_LD|BPF_H|BPF_ABS, 6),
		BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, ARPOP_RREQUEST, 0, 1),
		BPF_STMT(BPF_RET|BPF_K, 1024),
		BPF_STMT(BPF_RET|BPF_K, 0),
	};
	static struct sock_fprog filter = {
		sizeof insns / sizeof(insns[0]),
		insns
	};

	return setsockopt(fd, SOL_SOCKET, SO_ATTACH_FILTER, &filter, sizeof(filter));
}

开发者ID:OPSF，项目名称:uClinux，代码行数:15，代码来源:rarpd.c

示例10: bpf_arp_filter

int
bpf_arp_filter(int fd, int type_offset, int type, int pkt_size)
{
    struct bpf_insn insns[] = {
	BPF_STMT(BPF_LD+BPF_H+BPF_ABS, type_offset),
	BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, type, 0, 1),
	BPF_STMT(BPF_RET+BPF_K, pkt_size),
	BPF_STMT(BPF_RET+BPF_K, 0),
    };
    struct bpf_program prog;

    prog.bf_len = sizeof(insns) / sizeof(struct bpf_insn);
    prog.bf_insns = insns;
    return ioctl(fd, BIOCSETF, &prog);
}

开发者ID:alfintatorkace，项目名称:osx-10.9-opensource，代码行数:15，代码来源:bpflib.c

示例11: ATF_TC_BODY

ATF_TC_BODY(bpfjit_extmem_side_effect, tc)
{
	static struct bpf_insn insns[] = {
		BPF_STMT(BPF_LD+BPF_B+BPF_ABS, 0),  /* A <- P[0]  */
		BPF_STMT(BPF_LDX+BPF_W+BPF_IMM, 2), /* X <- 2     */
		BPF_STMT(BPF_ST, 1),                /* M[1] <- A  */
		BPF_STMT(BPF_ALU+BPF_ADD+BPF_X, 0), /* A <- A + X */
		BPF_STMT(BPF_STX, 2),               /* M[2] <- X  */
		BPF_STMT(BPF_ST, 3),                /* M[3] <- A  */
		BPF_STMT(BPF_LD+BPF_B+BPF_ABS, 99), /* A <- P[99] */
		BPF_STMT(BPF_RET+BPF_A, 0)          /* ret A      */
	};

	bpfjit_func_t code;
	uint8_t pkt[1] = { 1 };
	uint32_t mem[ctx.extwords];

	/* Pre-inited words. */
	mem[0] = 0;
	mem[3] = 7;

	mem[1] = mem[2] = 0xdeadbeef;

	bpf_args_t args = {
		.pkt = pkt,
		.buflen = sizeof(pkt),
		.wirelen = sizeof(pkt),
		.mem = mem,
	};

	size_t insn_count = sizeof(insns) / sizeof(insns[0]);

	RZ(rump_init());

	rump_schedule();
	code = rumpns_bpfjit_generate_code(&ctx, insns, insn_count);
	rump_unschedule();
	ATF_REQUIRE(code != NULL);

	ATF_CHECK(code(&ctx, &args) == 0);

	rump_schedule();
	rumpns_bpfjit_free_code(code);
	rump_unschedule();

	ATF_CHECK(mem[0] == 0);
	ATF_CHECK(mem[1] == 1);
	ATF_CHECK(mem[2] == 2);
	ATF_CHECK(mem[3] == 3);
}

ATF_TC(bpfjit_extmem_invalid_store);
ATF_TC_HEAD(bpfjit_extmem_invalid_store, tc)
{
	atf_tc_set_md_var(tc, "descr", "Test that out-of-range store "
	    "fails validation");
}

开发者ID:2asoft，项目名称:freebsd，代码行数:57，代码来源:t_extmem.c

示例12: npfctl_bpf_tcpfl

/*
 * npfctl_bpf_tcpfl: code block to match TCP flags.
 */
void
npfctl_bpf_tcpfl(npf_bpf_t *ctx, uint8_t tf, uint8_t tf_mask, bool checktcp)
{
	const u_int tcpfl_off = offsetof(struct tcphdr, th_flags);
	const bool usingmask = tf_mask != tf;

	/* X <- IP header length */
	fetch_l3(ctx, AF_UNSPEC, X_EQ_L4OFF);
	if (checktcp) {
		const u_int jf = usingmask ? 3 : 2;
		assert(ctx->ingroup == false);

		/* A <- L4 protocol; A == TCP?  If not, jump out. */
		struct bpf_insn insns_tcp[] = {
			BPF_STMT(BPF_LD+BPF_W+BPF_MEM, BPF_MW_L4PROTO),
			BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, IPPROTO_TCP, 0, jf),
		};
		add_insns(ctx, insns_tcp, __arraycount(insns_tcp));
	} else {
		assert(ctx->flags & CHECKED_L4);
	}

	struct bpf_insn insns_tf[] = {
		/* A <- TCP flags */
		BPF_STMT(BPF_LD+BPF_B+BPF_IND, tcpfl_off),
	};
	add_insns(ctx, insns_tf, __arraycount(insns_tf));

	if (usingmask) {
		/* A <- (A & mask) */
		struct bpf_insn insns_mask[] = {
			BPF_STMT(BPF_ALU+BPF_AND+BPF_K, tf_mask),
		};
		add_insns(ctx, insns_mask, __arraycount(insns_mask));
	}

	struct bpf_insn insns_cmp[] = {
		/* A == expected-TCP-flags? */
		BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, tf, 0, JUMP_MAGIC),
	};
	add_insns(ctx, insns_cmp, __arraycount(insns_cmp));

	if (!checktcp) {
		uint32_t mwords[] = { BM_TCPFL, 2, tf, tf_mask};
		done_block(ctx, mwords, sizeof(mwords));
	}
}

开发者ID:alexk99，项目名称:npf，代码行数:50，代码来源:npf_bpf_comp.c

示例13: setup_seccomp_filter

static int setup_seccomp_filter(void)
{
	struct sock_filter filter[] = {
		BPF_STMT(BPF_LD+BPF_W+BPF_ABS, offsetof(struct seccomp_data, nr)),
		/* Allow all syscalls except ptrace */
		BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, __NR_ptrace, 0, 1),
		BPF_STMT(BPF_RET+BPF_K, SECCOMP_RET_KILL),
		BPF_STMT(BPF_RET+BPF_K, SECCOMP_RET_ALLOW),
	};

	struct sock_fprog bpf_prog = {
		.len = (unsigned short)(sizeof(filter)/sizeof(filter[0])),
		.filter = filter,
	};

	if (sys_prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, (long) &bpf_prog, 0, 0) < 0)
		return -1;

	return 0;
}

static int check_ptrace_dump_seccomp_filters(void)
{
	pid_t pid;
	int ret = 0, len;

	if (opts.check_ms_kernel) {
		pr_warn("Skipping PTRACE_SECCOMP_GET_FILTER check");
		return 0;
	}

	pid = fork_and_ptrace_attach(setup_seccomp_filter);
	if (pid < 0)
		return -1;

	len = ptrace(PTRACE_SECCOMP_GET_FILTER, pid, 0, NULL);
	if (len < 0) {
		ret = -1;
		pr_perror("Dumping seccomp filters not supported");
	}

	kill(pid, SIGKILL);
	return ret;
}

开发者ID:Open-Party，项目名称:criu，代码行数:44，代码来源:cr-check.c

示例14: initFilter

/**********************************************************************
*%FUNCTION: initFilter
*%ARGUMENTS:
* fd -- file descriptor of BSD device
* type -- Ethernet frame type (0 for watch mode)
* hwaddr -- buffer with ehthernet address
*%RETURNS:
* Nothing
*%DESCRIPTION:
* Initializes the packet filter rules.
***********************************************************************/
void
initFilter(int fd, UINT16_t type, unsigned char *hwaddr)
{
    /* Packet Filter Instructions:
     * Note that the ethernet type names come from "pppoe.h" and are
     * used here to maintain consistency with the rest of this file. */
    static struct bpf_insn bpfRun[] = {         /* run PPPoE */
        BPF_STMT(BPF_LD+BPF_H+BPF_ABS, 12),     /* ethernet type */
        BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, ETH_PPPOE_SESSION, 5, 0),
        BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, ETH_PPPOE_DISCOVERY, 0, 9),
        BPF_STMT(BPF_LD+BPF_W+BPF_ABS, 0),      /* first word of dest. addr */
#define PPPOE_BCAST_CMPW 4                     /* offset of word compare */
        BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, 0, 0, 2),
        BPF_STMT(BPF_LD+BPF_H+BPF_ABS, 4),      /* next 1/2 word of dest. */
#define PPPOE_BCAST_CMPH 6                     /* offset of 1/2 word compare */
        BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, 0, 4, 0),
        BPF_STMT(BPF_LD+BPF_W+BPF_ABS, 0),      /* first word of dest. addr */
#define PPPOE_FILTER_CMPW 8                     /* offset of word compare */
        BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, 0, 0, 3),
        BPF_STMT(BPF_LD+BPF_H+BPF_ABS, 4),      /* next 1/2 word of dest. */
#define PPPOE_FILTER_CMPH 10                    /* offset of 1/rd compare */
        BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, 0, 0, 1),
        BPF_STMT(BPF_RET+BPF_K, (u_int) -1),    /* keep packet */
        BPF_STMT(BPF_RET+BPF_K, 0),             /* drop packet */
    };

    /* Fix the potentially varying parts */
    bpfRun[1].code = (u_short) BPF_JMP+BPF_JEQ+BPF_K;
    bpfRun[1].jt   = 5;
    bpfRun[1].jf   = 0;
    bpfRun[1].k    = Eth_PPPOE_Session;

    bpfRun[2].code = (u_short) BPF_JMP+BPF_JEQ+BPF_K;
    bpfRun[2].jt   = 0;
    bpfRun[2].jf   = 9;
    bpfRun[2].k    = Eth_PPPOE_Discovery;

    {
      struct bpf_insn bpfInsn[sizeof(bpfRun) / sizeof(bpfRun[0])];
      struct bpf_program bpfProgram;
      memcpy(bpfInsn, bpfRun, sizeof(bpfRun));
      bpfInsn[PPPOE_BCAST_CMPW].k = ((0xff << 24) | (0xff << 16) |
                                     (0xff << 8) | 0xff);
      bpfInsn[PPPOE_BCAST_CMPH].k = ((0xff << 8) | 0xff);
      bpfInsn[PPPOE_FILTER_CMPW].k = ((hwaddr[0] << 24) | (hwaddr[1] << 16) |
				      (hwaddr[2] << 8) | hwaddr[3]);
      bpfInsn[PPPOE_FILTER_CMPH].k = ((hwaddr[4] << 8) | hwaddr[5]);
      bpfProgram.bf_len = (sizeof(bpfInsn) / sizeof(bpfInsn[0]));
      bpfProgram.bf_insns = &bpfInsn[0];
      
      /* Apply the filter */
      if (ioctl(fd, BIOCSETF, &bpfProgram) < 0) {
	fatalSys("ioctl(BIOCSETF)");
      }
    }
}

开发者ID:BackupTheBerlios，项目名称:wl530g-svn，代码行数:67，代码来源:if.c

示例15: install_filter

static int install_filter(int nr, int arch, int error)
{
	struct sock_filter filter[] = {
		BPF_STMT(BPF_LD+BPF_W+BPF_ABS,
			 (offsetof(struct seccomp_data, arch))),
		BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, arch, 0, 3),
		BPF_STMT(BPF_LD+BPF_W+BPF_ABS,
			 (offsetof(struct seccomp_data, nr))),
		BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, nr, 0, 1),
		BPF_STMT(BPF_RET+BPF_K,
			 SECCOMP_RET_ERRNO|(error & SECCOMP_RET_DATA)),
		BPF_STMT(BPF_RET+BPF_K, SECCOMP_RET_ALLOW),
	};
	struct sock_fprog prog = {
		.len = (unsigned short)(sizeof(filter)/sizeof(filter[0])),
		.filter = filter,
	};
	if (prctl(PR_SET_SECCOMP, 2, &prog)) {
		perror("prctl");
		return 1;
	}
	return 0;
}

int main(int argc, char **argv)
{
	if (argc < 5) {
		fprintf(stderr, "Usage:\n"
			"dropper <syscall_nr> <arch> <errno> <prog> [<args>]\n"
			"Hint:	AUDIT_ARCH_I386: 0x%X\n"
			"	AUDIT_ARCH_X86_64: 0x%X\n"
			"\n", AUDIT_ARCH_I386, AUDIT_ARCH_X86_64);
		return 1;
	}
	if (install_filter(strtol(argv[1], NULL, 0), strtol(argv[2], NULL, 0),
			   strtol(argv[3], NULL, 0)))
		return 1;
	execv(argv[4], &argv[4]);
	printf("Failed to execv\n");
	return 255;
}

开发者ID:mikuhatsune001，项目名称:linux2.6.32，代码行数:41，代码来源:dropper.c

示例16: bpf_filter_receive_none

int
bpf_filter_receive_none(int fd)
{
    struct bpf_insn insns[] = {
	BPF_STMT(BPF_RET+BPF_K, 0),
    };
    struct bpf_program prog;

    prog.bf_len = sizeof(insns) / sizeof(struct bpf_insn);
    prog.bf_insns = insns;
    return ioctl(fd, BIOCSETF, &prog);
}

开发者ID:alfintatorkace，项目名称:osx-10.9-opensource，代码行数:12，代码来源:bpflib.c

示例17: qrpc_set_filter

int qrpc_set_filter(const int sock)
{
	struct sock_filter filter[] = {
		BPF_STMT(BPF_LD + BPF_H + BPF_ABS, ETH_ALEN << 1),	/* read packet type id */
		BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K,
			QRPC_RAW_SOCK_PROT, 0, 1),			/* if qtn packet */
		BPF_STMT(BPF_RET + BPF_K, ETH_FRAME_LEN),		/* accept packet */
		BPF_STMT(BPF_RET + BPF_K, 0)				/* else  ignore packet */
	};
	struct sock_fprog fp;

	fp.filter = filter;
	fp.len = ARRAY_SIZE(filter);

	if (setsockopt(sock, SOL_SOCKET, SO_ATTACH_FILTER, &fp, sizeof(fp)) < 0) {
		printf("Cannot set rpc packet filter\n");
		return -1;
	}

	return 0;
}

开发者ID:gygy，项目名称:asuswrt，代码行数:21，代码来源:rpc_raw.c

示例18: lldp_network_bind_raw_socket

int lldp_network_bind_raw_socket(int ifindex) {
        typedef struct LLDPFrame {
                struct ethhdr hdr;
                uint8_t tlvs[0];
        } LLDPFrame;

        struct sock_filter filter[] = {
                BPF_STMT(BPF_LD + BPF_W + BPF_ABS, offsetof(LLDPFrame, hdr.h_dest)),      /* A <- 4 bytes of destination MAC */
                BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, 0x0180c200, 1, 0),                    /* A != 01:80:c2:00 */
                BPF_STMT(BPF_RET + BPF_K, 0),                                             /* drop packet */
                BPF_STMT(BPF_LD + BPF_H + BPF_ABS, offsetof(LLDPFrame, hdr.h_dest) + 4),  /* A <- remaining 2 bytes of destination MAC */
                BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, 0x0000, 3, 0),                        /* A != 00:00 */
                BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, 0x0003, 2, 0),                        /* A != 00:03 */
                BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, 0x000e, 1, 0),                        /* A != 00:0e */
                BPF_STMT(BPF_RET + BPF_K, 0),                                             /* drop packet */
                BPF_STMT(BPF_LD + BPF_H + BPF_ABS, offsetof(LLDPFrame, hdr.h_proto)),     /* A <- protocol */
                BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, ETHERTYPE_LLDP, 1, 0),                /* A != ETHERTYPE_LLDP */
                BPF_STMT(BPF_RET + BPF_K, 0),                                             /* drop packet */
                BPF_STMT(BPF_RET + BPF_K, (uint32_t) -1),                                 /* accept packet */
        };

        struct sock_fprog fprog = {
                .len = ELEMENTSOF(filter),
                .filter = filter
        };

        _cleanup_close_ int s = -1;

        union sockaddr_union saddrll = {
                .ll.sll_family = AF_PACKET,
                .ll.sll_ifindex = ifindex,
        };

        int r;

        assert(ifindex > 0);

        s = socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
        if (s < 0)
                return -errno;

        r = setsockopt(s, SOL_SOCKET, SO_ATTACH_FILTER, &fprog, sizeof(fprog));
        if (r < 0)
                return -errno;

        r = bind(s, &saddrll.sa, sizeof(saddrll.ll));
        if (r < 0)
                return -errno;

        r = s;
        s = -1;

        return r;
}

开发者ID:rowhit，项目名称:systemd，代码行数:54，代码来源:lldp-network.c

示例19: initFilter

void
initFilter(int fd, UINT16_t type, unsigned char *hwaddr)
{
    static struct bpf_insn bpfRun[] = {         
	BPF_STMT(BPF_LD+BPF_H+BPF_ABS, 12),     
	BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, ETH_PPPOE_SESSION, 5, 0),
	BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, ETH_PPPOE_DISCOVERY, 0, 9),
	BPF_STMT(BPF_LD+BPF_W+BPF_ABS, 0),      
#define PPPOE_BCAST_CMPW 4                     
	BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, 0, 0, 2),
	BPF_STMT(BPF_LD+BPF_H+BPF_ABS, 4),      
#define PPPOE_BCAST_CMPH 6                     
	BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, 0, 4, 0),
	BPF_STMT(BPF_LD+BPF_W+BPF_ABS, 0),      
#define PPPOE_FILTER_CMPW 8                     
	BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, 0, 0, 3),
	BPF_STMT(BPF_LD+BPF_H+BPF_ABS, 4),      
#define PPPOE_FILTER_CMPH 10                    
	BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, 0, 0, 1),
	BPF_STMT(BPF_RET+BPF_K, (u_int) -1),    
	BPF_STMT(BPF_RET+BPF_K, 0),             
    };

    
    bpfRun[1].code = (u_short) BPF_JMP+BPF_JEQ+BPF_K;
    bpfRun[1].jt   = 5;
    bpfRun[1].jf   = 0;
    bpfRun[1].k    = Eth_PPPOE_Session;

    bpfRun[2].code = (u_short) BPF_JMP+BPF_JEQ+BPF_K;
    bpfRun[2].jt   = 0;
    bpfRun[2].jf   = 9;
    bpfRun[2].k    = Eth_PPPOE_Discovery;

    {
      struct bpf_insn bpfInsn[sizeof(bpfRun) / sizeof(bpfRun[0])];
      struct bpf_program bpfProgram;
      memcpy(bpfInsn, bpfRun, sizeof(bpfRun));
      bpfInsn[PPPOE_BCAST_CMPW].k = ((0xff << 24) | (0xff << 16) |
				     (0xff << 8) | 0xff);
      bpfInsn[PPPOE_BCAST_CMPH].k = ((0xff << 8) | 0xff);
      bpfInsn[PPPOE_FILTER_CMPW].k = ((hwaddr[0] << 24) | (hwaddr[1] << 16) |
				      (hwaddr[2] << 8) | hwaddr[3]);
      bpfInsn[PPPOE_FILTER_CMPH].k = ((hwaddr[4] << 8) | hwaddr[5]);
      bpfProgram.bf_len = (sizeof(bpfInsn) / sizeof(bpfInsn[0]));
      bpfProgram.bf_insns = &bpfInsn[0];

      
      if (ioctl(fd, BIOCSETF, &bpfProgram) < 0) {
	fatalSys("ioctl(BIOCSETF)");
      }
    }
}

开发者ID:qtekfun，项目名称:htcDesire820Kernel，代码行数:53，代码来源:if.c

示例20: arp_network_bind_raw_socket

int arp_network_bind_raw_socket(int ifindex, union sockaddr_union *link) {

        static const struct sock_filter filter[] = {
                BPF_STMT(BPF_LD + BPF_W + BPF_LEN, 0),                                         /* A <- packet length */
                BPF_JUMP(BPF_JMP + BPF_JGE + BPF_K, sizeof(struct ether_arp), 1, 0),           /* packet >= arp packet ? */
                BPF_STMT(BPF_RET + BPF_K, 0),                                                  /* ignore */
                BPF_STMT(BPF_LD + BPF_H + BPF_ABS, offsetof(struct ether_arp, ea_hdr.ar_hrd)), /* A <- header */
                BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, ARPHRD_ETHER, 1, 0),                       /* header == ethernet ? */
                BPF_STMT(BPF_RET + BPF_K, 0),                                                  /* ignore */
                BPF_STMT(BPF_LD + BPF_H + BPF_ABS, offsetof(struct ether_arp, ea_hdr.ar_pro)), /* A <- protocol */
                BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, ETHERTYPE_IP, 1, 0),                       /* protocol == IP ? */
                BPF_STMT(BPF_RET + BPF_K, 0),                                                  /* ignore */
                BPF_STMT(BPF_LD + BPF_H + BPF_ABS, offsetof(struct ether_arp, ea_hdr.ar_op)),  /* A <- operation */
                BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, ARPOP_REQUEST, 0, 1),                      /* protocol == request ? */
                BPF_STMT(BPF_RET + BPF_K, 65535),                                              /* return all */
                BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, ARPOP_REPLY, 0, 1),                        /* protocol == reply ? */
                BPF_STMT(BPF_RET + BPF_K, 65535),                                              /* return all */
                BPF_STMT(BPF_RET + BPF_K, 0),                                                  /* ignore */
        };
        struct sock_fprog fprog = {
                .len = ELEMENTSOF(filter),
                .filter = (struct sock_filter*) filter
        };
        _cleanup_close_ int s = -1;
        int r;

        assert(ifindex > 0);
        assert(link);

        s = socket(PF_PACKET, SOCK_DGRAM | SOCK_CLOEXEC | SOCK_NONBLOCK, 0);
        if (s < 0)
                return -errno;

        r = setsockopt(s, SOL_SOCKET, SO_ATTACH_FILTER, &fprog, sizeof(fprog));
        if (r < 0)
                return -errno;

        link->ll.sll_family = AF_PACKET;
        link->ll.sll_protocol = htons(ETH_P_ARP);
        link->ll.sll_ifindex = ifindex;
        link->ll.sll_halen = ETH_ALEN;
        memset(link->ll.sll_addr, 0xff, ETH_ALEN);

        r = bind(s, &link->sa, sizeof(link->ll));
        if (r < 0)
                return -errno;

        r = s;
        s = -1;

        return r;
}

开发者ID:AlexBaranosky，项目名称:systemd，代码行数:52，代码来源:ipv4ll-network.c

注：本文中的BPF_STMT函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ BPTR函数代码示例发布时间：2022-05-30

C++ BOXED2RVAL函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18334|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9702|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8193|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8560|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8471|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9412|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8443|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7875|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8427|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7403|2022-11-06

客服电话

电子邮件

C++ BPF_STMT函数代码示例

示例1: enable_setter_seccomp

示例2: _darwinEthernet_SetFilter

示例3: filter_syscall

示例4: netlink_install_filter

示例5: install_filter

示例6: install_filter

示例7: main

示例8: _open_socket

示例9: load_arp_bpflet

示例10: bpf_arp_filter

示例11: ATF_TC_BODY

示例12: npfctl_bpf_tcpfl

示例13: setup_seccomp_filter

示例14: initFilter

示例15: install_filter

示例16: bpf_filter_receive_none

示例17: qrpc_set_filter

示例18: lldp_network_bind_raw_socket

示例19: initFilter

示例20: arp_network_bind_raw_socket

请发表评论

全部评论

上一篇：

下一篇：

theindianappguy/machine_learning_flutter

samaxes/minify-maven-plugin: Combine and

挨打的读音是什么？是āi dǎ还是ái dǎ？

微信小程序公告滚动通知 - 子钦加油

nacika-ins/nanachibot: nanachibot is Rus

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053