C++ BSP_IO_ITClear函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中BSP_IO_ITClear函数的典型用法代码示例。如果您正苦于以下问题：C++ BSP_IO_ITClear函数的具体用法？C++ BSP_IO_ITClear怎么用？C++ BSP_IO_ITClear使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了BSP_IO_ITClear函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: HAL_GPIO_EXTI_Callback

/**
  * @brief  EXTI line detection callbacks.
  * @param  GPIO_Pin: Specifies the pins connected EXTI line
  * @retval None
  */
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
{
  static JOYState_TypeDef JoyState = JOY_NONE;
  
  if(GPIO_Pin == GPIO_PIN_2)
  {    
    /* Get the Joystick State */
    JoyState = BSP_JOY_GetState();
    
    MSC_DEMO_ProbeKey(JoyState); 
    
    switch(JoyState)
    {
    case JOY_LEFT:
      LCD_LOG_ScrollBack();
      break;
           
    case JOY_RIGHT:
      LCD_LOG_ScrollForward();
      break;          
      
    default:
      break;           
    }
    /* Clear joystick interrupt pending bits */
    BSP_IO_ITClear(JOY_ALL_PINS);
  }
}

开发者ID:451506709，项目名称:automated_machine，代码行数:33，代码来源:menu.c

示例2: ethernetif_notify_conn_changed

/**
  * @brief  This function notify user about link status changement.
  * @param  netif: the network interface
  * @retval None
  */
void ethernetif_notify_conn_changed(struct netif *netif)
{
  struct ip_addr ipaddr;
  struct ip_addr netmask;
  struct ip_addr gw;
  
  if(netif_is_link_up(netif))
  {
    IP4_ADDR(&ipaddr, IP_ADDR0, IP_ADDR1, IP_ADDR2, IP_ADDR3);
    IP4_ADDR(&netmask, NETMASK_ADDR0, NETMASK_ADDR1 , NETMASK_ADDR2, NETMASK_ADDR3);
    IP4_ADDR(&gw, GW_ADDR0, GW_ADDR1, GW_ADDR2, GW_ADDR3);    
    
    netif_set_addr(netif, &ipaddr , &netmask, &gw);
    
    /* When the netif is fully configured this function must be called.*/
    netif_set_up(netif);      
    
    BSP_LED_Off(LED2);
    BSP_LED_On(LED1);    
  }
  else
  {    
    /*  When the netif link is down this function must be called.*/
    netif_set_down(netif);
    
    BSP_LED_Off(LED1);
    BSP_LED_On(LED2);   
  }
  
  /* Clear IO Expander Interrupt flag */
  BSP_IO_ITClear();
}

开发者ID:eemei，项目名称:library-stm32f4，代码行数:37，代码来源:app_ethernet.c

示例3: HAL_GPIO_EXTI_Callback

/**
  * @brief  EXTI line detection callbacks.
  * @param  GPIO_Pin: Specifies the pins connected EXTI line
  * @retval None
  */
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
{  
  __IO JOYState_TypeDef JoyState = JOY_NONE;
  
  if(GPIO_Pin == GPIO_PIN_8)
  {    
    /* Get the Joystick State */
    JoyState = BSP_JOY_GetState();
    
    HID_DEMO_ProbeKey(JoyState); 
    
    switch(JoyState)
    {
    case JOY_LEFT:
      LCD_LOG_ScrollBack();
      break;
           
    case JOY_RIGHT:
      LCD_LOG_ScrollForward();
      break;          
      
    default:
      break;           
    }
    /* Clear joystick interrupt pending bits */
    BSP_IO_ITClear();
    osSemaphoreRelease(MenuEvent);
  }
}

开发者ID:nidhiyanandh，项目名称:STM32Cube_FW_F4_V1.5.0_GCC_Makefile，代码行数:34，代码来源:menu.c

示例4: BSP_TS_ITClear

/**
  * @brief  Clears all touch screen interrupts.
  * @param  None
  * @retval None
  */  
void BSP_TS_ITClear(void)
{
  /* Clear all IO IT pin */
  BSP_IO_ITClear();
  
  /* Clear TS IT pending bits */
  TsDrv->ClearIT(TS_I2C_ADDRESS); 
}

开发者ID:Bosvark，项目名称:STM32Cube_FW_F4_V1.1.0，代码行数:13，代码来源:stm32f429i_discovery_ts.c

示例5: HAL_GPIO_EXTI_Callback

/**
  * @brief  EXTI line detection callbacks
  * @param  GPIO_Pin: Specifies the pins connected EXTI line
  * @retval None
  */
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
{
  /* Get the IT status register value */
  if(BSP_IO_ITGetStatus(MII_INT_PIN))
  {
    ethernetif_set_link(&gnetif);
  }
  BSP_IO_ITClear();
}

开发者ID:eemei，项目名称:library-stm32f4，代码行数:14，代码来源:main.c

示例6: BSP_SD_DetectIT

/** @brief  SD detect IT treatment.
  * @param  None
  * @retval None
  */
void BSP_SD_DetectIT(void)
{
  /* Clear all pending bits */
  BSP_IO_ITClear();
  
  /* To re-enable IT */
  BSP_SD_ITConfig();
  
  /* SD detect IT callback */
  BSP_SD_DetectCallback();
}

开发者ID:ClintHaerinck，项目名称:STM32Cube_FW_F4，代码行数:15，代码来源:stm324x9i_eval_sd.c

示例7: HAL_GPIO_EXTI_Callback

/**
  * @brief  EXTI line detection callbacks
  * @param  GPIO_Pin: Specifies the pins connected EXTI line
  * @retval None
  */
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
{
  if (GPIO_Pin == MFX_IRQOUT_PIN)
  {
    /* Get the IT status register value */
    if(BSP_IO_ITGetStatus(MII_INT_PIN))
    {
      /* ethernetif_notify_conn_changed(&gnetif);; */
    }
    BSP_IO_ITClear();
  }
}

开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:17，代码来源:vnc_app.c

示例8: HAL_GPIO_EXTI_Callback

/**
  * @brief EXTI line detection callbacks
  * @param GPIO_Pin: Specifies the pins connected EXTI line
  * @retval None
  */
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
{
    if (GPIO_Pin == MFX_IRQOUT_PIN)
    {
        /* Get the IT status register value */
        if(BSP_IO_ITGetStatus(MII_INT_PIN))
        {
            osSemaphoreRelease(Netif_LinkSemaphore);
        }
        BSP_IO_ITClear();
    }
}

开发者ID:RadMie，项目名称:STM32F7DiscoveryBase，代码行数:17，代码来源:main.c

示例9: HAL_GPIO_EXTI_Callback

/**
  * @brief  EXTI line detection callbacks.
  * @param  GPIO_Pin: Specifies the pins connected EXTI line
  * @retval None
  */
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
{
  if(BSP_IO_ITGetStatus(JOY_SEL_PIN) != 0)
  {
    /* SEL is used to pause and resume the audio playback */
    if (PressCount == 1)
    {
      /* Resume playing Wave status */
      PauseResumeStatus = RESUME_STATUS;
      PressCount = 0;
    }
    else
    {
      /* Pause playing Wave status */
      PauseResumeStatus = PAUSE_STATUS;
      PressCount = 1;
    }
  }
  else if(BSP_IO_ITGetStatus(JOY_UP_PIN) != 0)
  {
    /* UP is used to increment the volume of the audio playback */
    volume ++;
    if (volume > 100)
    {
      volume = 100;
    }
    VolumeChange = 1;
  }
  else if(BSP_IO_ITGetStatus(JOY_DOWN_PIN) != 0)
  {
    /* DOWN is used to decrement the volume of the audio playback */
    volume --;
    if ((int8_t)volume < 50)
    {
      volume = 50;
    }
    VolumeChange = 1;
  }
  else if(BSP_IO_ITGetStatus(JOY_RIGHT_PIN) != 0)
  {
    /* Audio change output: speaker only */
    UserOutputMode = OUTPUT_DEVICE_SPEAKER;
  }
  else if(BSP_IO_ITGetStatus(JOY_LEFT_PIN) != 0)
  {
    /* Audio change output: headset only */
    UserOutputMode = OUTPUT_DEVICE_HEADPHONE;
  }

  /* Clear IO Expander IT */
  BSP_IO_ITClear(JOY_ALL_PINS);
}

开发者ID:Lembed，项目名称:STM32CubeF1-mirrors，代码行数:57，代码来源:main.c

示例10: Joystick_exti_demo

/**
  * @brief  Joystick Exti demo
  * @param  None
  * @retval None
  */
void Joystick_exti_demo (void)
{
  uint8_t status = 0;
  uint32_t ITstatus = 0;

  Joystick_SetHint(1);

  status = BSP_JOY_Init(JOY_MODE_EXTI);

  if (status != IO_OK)
  {
    BSP_LCD_SetBackColor(LCD_COLOR_WHITE);
    BSP_LCD_SetTextColor(LCD_COLOR_RED);
    BSP_LCD_DisplayStringAt(0, BSP_LCD_GetYSize()- 95, (uint8_t *)"ERROR", CENTER_MODE);
    BSP_LCD_DisplayStringAt(0, BSP_LCD_GetYSize()- 80, (uint8_t *)"Joystick cannot be initialized", CENTER_MODE);
  }

  if (status == IO_OK)
  {
    Joystick_SetCursorPosition();
  }	

  while (1)  /* pull for USER button in GPIO mode */
  {
    if (status == IO_OK)
    {
      if (MfxExtiReceived == 1)
      {
        MfxExtiReceived = 0;
        ITstatus = BSP_IO_ITGetStatus(JOY_ALL_PINS);
        if (ITstatus)
        {
          /* Get the Joystick State */
          JoyState = BSP_JOY_GetState();
          Joystick_SetCursorPosition();
        }
        BSP_IO_ITClear();
        /* poll if joystick is still pressed until it is released*/
        while ( BSP_JOY_GetState() != JOY_NONE)
        {
          Joystick_SetCursorPosition();
          HAL_Delay(5);
        }
      }
    }
    if(CheckForUserInput() > 0)
    {
      return;
    }
    HAL_Delay(5);
  }
}

开发者ID:eemei，项目名称:library-stm32f4，代码行数:57，代码来源:joystick.c

示例11: main

/**
* @brief  Main program
* @param  None
* @retval None
*/
int main(void)
{    
  /* STM32F4xx HAL library initialization:
       - Configure the Flash prefetch, instruction and Data caches
       - Configure the Systick to generate an interrupt each 1 msec
       - Set NVIC Group Priority to 4
       - Global MSP (MCU Support Package) initialization
     */
  HAL_Init();  

  /* Configure the system clock to 180 MHz */
  SystemClock_Config();
  
  /* Configure LED1 and LED3 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED3);

  /* Configure Key Button */
  BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_EXTI);
  
  /* Configure Joystick using MFX in IT mode in order to wakeup system after standby */
  BSP_JOY_Init(JOY_MODE_EXTI);

  /* RTC configuration */
  RTC_Config();
  
  /* Turn on LED1 */
  BSP_LED_On(LED1);

  /* Enable WKUP pin */
  HAL_PWR_EnableWakeUpPin(PWR_WAKEUP_PIN1);

  /* Infinite loop */
  while (1)
  {
    if (AuthorizeToggle)
    {
      /* Toggle LED1 */
      BSP_LED_Toggle(LED1);
      AuthorizeToggle = 0;
    }
    if (MfxExtiReceived)
    {
      /* Clear MFX IT */
      BSP_IO_ITClear();
      MfxExtiReceived = 0;
    }
  }
}

开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:54，代码来源:main.c

示例12: HAL_GPIO_EXTI_Callback

/**
  * @brief  EXTI line detection callbacks.
  * @param  GPIO_Pin: Specifies the pins connected EXTI line
  * @retval None
  */
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
{
  /* If the interruption comes from the Joystick, check which
     Joystick button has been pressed */
  JoyState = BSP_JOY_GetState();

  if(JoyState == JOY_SEL) 
  {
    /* SEL is used to pause and resume the audio playback */
    if (PressCount == 1)
    {
      /* Resume playing Wave status */
      PauseResumeStatus = RESUME_STATUS;
      PressCount = 0;
    }
    else
    {
      /* Pause playing Wave status */
      PauseResumeStatus = PAUSE_STATUS;
      PressCount = 1;
    }
  }
  else if(JoyState == JOY_UP)
  {
    /* UP is used to increment the volume of the audio playback */
    volume ++;
    if (volume > 100)
    {
      volume = 100;
    }
    VolumeChange = 1;
  }
  else if(JoyState == JOY_DOWN)
  {
    /* DOWN is used to decrement the volume of the audio playback */
    volume --;
    if ((int8_t)volume < 50)
    {
      volume = 50;
    }
    VolumeChange = 1;
  }

  /* Clear MFX IT */
  BSP_IO_ITClear();
}

开发者ID:RadMie，项目名称:STM32F7DiscoveryBase，代码行数:51，代码来源:main.c

示例13: HAL_GPIO_EXTI_Callback

/**
  * @brief EXTI line detection callbacks
  * @param GPIO_Pin: Specifies the pins connected EXTI line
  * @retval None
  */
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
{
  
  if (GPIO_Pin == GPIO_PIN_8)
  {
    /* Get the IT status register value */
    if(BSP_IO_ITGetStatus(MII_INT_PIN))
    {
      ethernetif_set_link(&gnetif);
    }
    BSP_IO_ITClear();
  }
  else if (GPIO_Pin == GPIO_PIN_13)
  {
     /*connect to tcp server */ 
     udp_echoclient_send();
  }
}

开发者ID:PaxInstruments，项目名称:STM32CubeF4，代码行数:23，代码来源:main.c

示例14: ethernetif_notify_conn_changed

/**
  * @brief  This function notify user about link status changement.
  * @param  netif: the network interface
  * @retval None
  */
void ethernetif_notify_conn_changed(struct netif *netif)
{
  struct ip_addr ipaddr;
  struct ip_addr netmask;
  struct ip_addr gw;

  if(netif_is_link_up(netif))
  {
    /* IP address setting */
    IP4_ADDR(&ipaddr, ip_address[3], ip_address[2], ip_address[1], ip_address[0]);
    IP4_ADDR(&netmask, sn_mask[3], sn_mask[2] , sn_mask[1], sn_mask[0]);
    IP4_ADDR(&gw, gw_address[3], gw_address[2], gw_address[1], gw_address[0]);
    
    netif_set_addr(netif, &ipaddr , &netmask, &gw);
    
    /* When the netif is fully configured this function must be called.*/
    netif_set_up(netif);
    
    _VNCServer_Notify(NOTIFY_SERVER_NETIF_UP);

    /* If DHCP: re-start process */
    if (_DHCPClinet_TCB != 0)
    {
      /* Update DHCP state machine */
      DHCP_state = DHCP_START;
    }
  }
  else
  {   
    /*  When the netif link is down this function must be called.*/
    netif_set_down(netif);
    
    _VNCServer_Notify(NOTIFY_SERVER_NETIF_DOWN);
    
    /* If DHCP: stop process */
    if (_DHCPClinet_TCB != 0)
    {
      /* Update DHCP state machine */
      DHCP_state = DHCP_LINK_DOWN;
    }
  }
  /* Clear IO Expander Interrupt flag */
  BSP_IO_ITClear();
}

开发者ID:EarnestHein89，项目名称:STM32Cube_FW_F4，代码行数:49，代码来源:vncserver_app.c

示例15: SD_exti_demo

/**
  * @brief  SD Demo exti detection
  * @param  None
  * @retval None
  */
void SD_exti_demo (void)
{ 
  uint32_t ITstatus = 0;

  SD_main_test();

  if(BSP_SD_IsDetected() != SD_PRESENT)
  {
        BSP_SD_Init();
        BSP_LCD_SetTextColor(LCD_COLOR_RED);
        BSP_LCD_DisplayStringAt(20, BSP_LCD_GetYSize()-30, (uint8_t *)"SD Not Connected", LEFT_MODE);
  }
  else 
  {
      BSP_LCD_SetTextColor(LCD_COLOR_GREEN);
      BSP_LCD_DisplayStringAt(20, BSP_LCD_GetYSize()-30,   (uint8_t *)"SD Connected    ", LEFT_MODE);
  }

  BSP_SD_ITConfig();

  while (1)
  {
    if (MfxExtiReceived == 1)
    {
      MfxExtiReceived = 0;
      ITstatus = BSP_IO_ITGetStatus(SD_DETECT_PIN);
      if (ITstatus)
      {
        SD_Detection();
      }
      BSP_IO_ITClear();
      }
    
    if(CheckForUserInput() > 0)
    {
      BSP_SD_DeInit();
      return;
    }
  }
}

开发者ID:451506709，项目名称:automated_machine，代码行数:45，代码来源:sd.c

示例16: HAL_GPIO_EXTI_Callback

/**
  * @brief  EXTI line detection callbacks.
  * @param  GPIO_Pin: Specifies the pins connected EXTI line
  * @retval None
  */
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
{
  static JOYState_TypeDef JoyState = JOY_NONE;
  
  if(GPIO_Pin == MFX_IRQOUT_PIN)
  {    
    /* The different functionalities of MFX (TS, Joystick, SD detection, etc. )  
    can be configured in exti mode to generate an IRQ on given events.
    The MFX IRQ_OUT pin is unique and common to all functionalities, so if several 
    functionalities are configured in exit mode, the MCU has to enquire MFX about  
    the IRQ source (see BSP_IO_ITGetStatus). Communication with Mfx is done by I2C. 
    Often the sw requires ISRs (irq service routines) to be quick while communication 
    with I2C can be considered relatively long (hundreds of usec depending on I2C clk). 
    Considering that the features for human interaction like TS, Joystick, SD detection 
    don’t need immediate reaction, it is suggested to use POLLING instead of EXTI mode, 
    in order to avoid "blocking I2C communication" on interrupt service routines */

    /* Get the Joystick State */
    JoyState = BSP_JOY_GetState();
    HAL_Delay(200);
    
    MSC_DEMO_ProbeKey(JoyState); 
    
    switch(JoyState)
    {
    case JOY_LEFT:
      LCD_LOG_ScrollBack();
      break;
           
    case JOY_RIGHT:
      LCD_LOG_ScrollForward();
      break;          
      
    default:
      break;           
    }
    /* Clear joystick interrupt pending bits */
    BSP_IO_ITClear();
  }
}

开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:45，代码来源:menu.c

示例17: HAL_GPIO_EXTI_Callback

/**
  * @brief  EXTI line detection callbacks.
  * @param  GPIO_Pin: Specifies the pins connected EXTI line
  * @retval None
  */
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
{  
  __IO JOYState_TypeDef JoyState = JOY_NONE;
  
  if(GPIO_Pin == MFX_IRQOUT_PIN)
  {    
    /* The different functionalities of MFX (TS, Joystick, SD detection, etc. )  
    can be configured in exti mode to generate an IRQ on given events.
    The MFX IRQ_OUT pin is unique and common to all functionalities, so if several 
    functionalities are configured in exit mode, the MCU has to enquire MFX about  
    the IRQ source (see BSP_IO_ITGetStatus). Communication with Mfx is done by I2C. 
    Often the sw requires ISRs (irq service routines) to be quick while communication 
    with I2C can be considered relatively long (hundreds of usec depending on I2C clk). 
    In order to avoid to use "blocking I2C communication" on interrupt service routines 
    it's suggested (as alternative to this implementation) to use dedicated semaphore*/

    /* Get the Joystick State */
    JoyState = BSP_JOY_GetState();
    
    HID_DEMO_ProbeKey(JoyState); 
    
    switch(JoyState)
    {
    case JOY_LEFT:
      LCD_LOG_ScrollBack();
      break;
           
    case JOY_RIGHT:
      LCD_LOG_ScrollForward();
      break;          
      
    default:
      break;           
    }
    /* Clear joystick interrupt pending bits */
    BSP_IO_ITClear();
    osSemaphoreRelease(MenuEvent);
  }
}

开发者ID:nguyenvuhung，项目名称:STM32Cube_FW_F4，代码行数:44，代码来源:menu.c

示例18: MSC_MenuThread

/**
  * @brief  User task
  * @param  pvParameters not used
  * @retval None
  */
static void MSC_MenuThread(void const *argument)
{
  uint32_t ITstatus = 0;

  for(;;)
  {
    if(osSemaphoreWait(MenuEvent, 100) == osOK)
    {
      switch(msc_demo.state)
      {
      case MSC_DEMO_IDLE:
        MSC_SelectItem(MSC_main_menu, 0); 
        msc_demo.state = MSC_DEMO_WAIT;
        msc_demo.select = 0;
        osSemaphoreRelease(MenuEvent);
        break;    
        
      case MSC_DEMO_WAIT:
        MSC_SelectItem(MSC_main_menu, msc_demo.select & 0x7F);
        
        /* Handle select item */
        if(msc_demo.select & 0x80)
        {
          switch(msc_demo.select & 0x7F)
          {
          case 0:
            msc_demo.state = MSC_DEMO_FILE_OPERATIONS; 
            osSemaphoreRelease(MenuEvent);
            break;
            
          case 1:
            msc_demo.state = MSC_DEMO_EXPLORER;  
            osSemaphoreRelease(MenuEvent);
            break;
            
          case 2:
            msc_demo.state = MSC_REENUMERATE; 
            osSemaphoreRelease(MenuEvent);
            break;
            
          default:
            break;
          }
        }
        break;
        
      case MSC_DEMO_FILE_OPERATIONS:  
        /* Read and Write File Here */
        if(Appli_state == APPLICATION_READY)
        {
          MSC_File_Operations();
        }
        msc_demo.state = MSC_DEMO_WAIT;
        break; 
        
      case MSC_DEMO_EXPLORER:
        /* Display disk content */
        if(Appli_state == APPLICATION_READY)
        {        
          Explore_Disk("0:/", 1);
        }
        msc_demo.state = MSC_DEMO_WAIT;
        break; 
        
      case MSC_REENUMERATE:
        /* Force MSC Device to re-enumerate */
        USBH_ReEnumerate(&hUSBHost); 
        msc_demo.state = MSC_DEMO_WAIT;
        break;
        
      default:
        break;
      } 
      msc_demo.select &= 0x7F;
    }

    if (osJoySemaphore != NULL)
    {      
      if(osSemaphoreWait(osJoySemaphore , 0) == osOK)
      {
        ITstatus = BSP_IO_ITGetStatus(JOY_ALL_PINS);
        if (ITstatus)
        {
          Joystick_MscMenu();
          /* Clear joystick interrupt pending bits */
          BSP_IO_ITClear();
        }
      }
    }
  }
}

开发者ID:z80，项目名称:stm32f429，代码行数:96，代码来源:menu.c

示例19: HAL_GPIO_EXTI_Callback

/**
  * @brief  EXTI line detection callbacks.
  * @param  GPIO_Pin: Specifies the pins connected EXTI line
  * @retval None
  */
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
{
  static JOYState_TypeDef JoyState = JOY_NONE;
  static uint32_t debounce_time = 0;
  
  if(GPIO_Pin == GPIO_PIN_8)
  {    
    /* Get the Joystick State */
    JoyState = BSP_JOY_GetState();
    HAL_Delay(200);
    
    /* Clear joystick interrupt pending bits */
    BSP_IO_ITClear();
    
    if(Appli_state == APPLICATION_MSC)
    {
      MSC_DEMO_ProbeKey(JoyState); 
    }
    else if(Appli_state == APPLICATION_HID)
    {
      HID_DEMO_ProbeKey(JoyState); 
    }
    else if(Appli_state == APPLICATION_AUDIO)
    {
      if(audio_select_mode == AUDIO_SELECT_MENU)
      {  
        AUDIO_MenuProbeKey(JoyState); 
      }
      else if(audio_select_mode == AUDIO_PLAYBACK_CONTROL)
      {
        AUDIO_PlaybackProbeKey(JoyState);
      }
    }
    switch(JoyState)
    {
    case JOY_LEFT:
      LCD_LOG_ScrollBack();
      break;
           
    case JOY_RIGHT:
      LCD_LOG_ScrollForward();
      break;          
      
    default:
      break;           
    }
  }
  
  if(audio_demo.state == AUDIO_DEMO_PLAYBACK)
  {
    if(GPIO_Pin == KEY_BUTTON_PIN)
    { 
      /* Prevent debounce effect for user key */
      if((HAL_GetTick() - debounce_time) > 50)
      {
        debounce_time = HAL_GetTick();
      }
      else
      {
        return;
      }
      
      /* Change the selection type */
      if(audio_select_mode == AUDIO_SELECT_MENU)
      {
        Audio_ChangeSelectMode(AUDIO_PLAYBACK_CONTROL); 
      }
      else if(audio_select_mode == AUDIO_PLAYBACK_CONTROL)
      {       
        Audio_ChangeSelectMode(AUDIO_SELECT_MENU);
      }
    }
  }
}

开发者ID:vlsi1217，项目名称:STM32F7Cube，代码行数:79，代码来源:menu.c

示例20: HAL_GPIO_EXTI_Callback

/**
  * @brief  EXTI line detection callbacks.
  * @param  GPIO_Pin: Specifies the pins connected EXTI line
  * @retval None
  */
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
{
  static JOYState_TypeDef JoyState = JOY_NONE;
  static uint32_t debounce_time = 0;

  if(GPIO_Pin == GPIO_PIN_8)
  {    
    /* Get the Joystick State */
    JoyState = BSP_JOY_GetState();
    
    CDC_DEMO_ProbeKey(JoyState); 
    
    /* Clear joystick interrupt pending bits */
    BSP_IO_ITClear();
    
    if((CdcSelectMode == CDC_SELECT_MENU) && (CdcDemo.state != CDC_DEMO_RECEIVE))
    {
      switch(JoyState)
      {
      case JOY_LEFT:
        LCD_LOG_ScrollBack();
        break;
             
      case JOY_RIGHT:
        LCD_LOG_ScrollForward();
        break;          
        
      default:
        break;           
      }
    }
  }
  
  if(CdcDemo.state == CDC_DEMO_CONFIGURATION)
  {
    if(GPIO_Pin == KEY_BUTTON_PIN)
    {  
      /* Prevent debounce effect for user key */
      if((HAL_GetTick() - debounce_time) > 50)
      {
        debounce_time = HAL_GetTick();
      }
      else
      {
        return;
      }  
      BSP_LCD_SetBackColor(LCD_COLOR_BLACK); 
      /* Change the selection type */
      if(CdcSelectMode == CDC_SELECT_MENU)
      {
        CDC_ChangeSelectMode(CDC_SELECT_CONFIG); 
      }
      else if(CdcSelectMode == CDC_SELECT_CONFIG)
      {
        CDC_ChangeSelectMode(CDC_SELECT_MENU);
      }
      
      else if(CdcSelectMode == CDC_SELECT_FILE)
      {
        CDC_ChangeSelectMode(CDC_SELECT_FILE);
      }
    }
  }
  
  if(CdcDemo.state == CDC_DEMO_SEND)
  {
    if(GPIO_Pin == KEY_BUTTON_PIN)
    { 
      /* Prevent debounce effect for user key */
      if((HAL_GetTick() - debounce_time) > 50)
      {
        debounce_time = HAL_GetTick();
      }
      else
      {
        return;
      }  
      
      if(CdcDemo.Send_state == CDC_SEND_SELECT_FILE)
      {
        BSP_LCD_SetBackColor(LCD_COLOR_BLACK);   
        /* Change the selection type */
        if(CdcSelectMode == CDC_SELECT_MENU)
        {
          CDC_ChangeSelectMode(CDC_SELECT_FILE); 
        }
        else if(CdcSelectMode == CDC_SELECT_FILE)
        {
          LCD_ClearTextZone();    
          LCD_LOG_UpdateDisplay();
          CDC_ChangeSelectMode(CDC_SELECT_MENU);
          CdcDemo.Send_state = CDC_SEND_WAIT;
        }
      }
    }
//.........这里部分代码省略.........

开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:101，代码来源:menu.c

注：本文中的BSP_IO_ITClear函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ BSP_IO_Init函数代码示例发布时间：2022-05-30

C++ BSP_IO_ConfigPin函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18335|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9702|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8193|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8560|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8472|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9412|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8443|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7875|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8427|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7403|2022-11-06

客服电话

电子邮件

C++ BSP_IO_ITClear函数代码示例

示例1: HAL_GPIO_EXTI_Callback

示例2: ethernetif_notify_conn_changed

示例3: HAL_GPIO_EXTI_Callback

示例4: BSP_TS_ITClear

示例5: HAL_GPIO_EXTI_Callback

示例6: BSP_SD_DetectIT

示例7: HAL_GPIO_EXTI_Callback

示例8: HAL_GPIO_EXTI_Callback

示例9: HAL_GPIO_EXTI_Callback

示例10: Joystick_exti_demo

示例11: main

示例12: HAL_GPIO_EXTI_Callback

示例13: HAL_GPIO_EXTI_Callback

示例14: ethernetif_notify_conn_changed

示例15: SD_exti_demo

示例16: HAL_GPIO_EXTI_Callback

示例17: HAL_GPIO_EXTI_Callback

示例18: MSC_MenuThread

示例19: HAL_GPIO_EXTI_Callback

示例20: HAL_GPIO_EXTI_Callback

请发表评论

全部评论

上一篇：

下一篇：

kojino/Harvard-Robust-Machine-Learning:

cescoffier/puppet-nexus: A Puppet Module

文的笔顺,诠释文的笔画,解读文的部首

Cassolotl/sentient.cloud · GitHub

blundell/release-android-library: Remote

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053