C++ BSP_LCD_DisplayOn函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中BSP_LCD_DisplayOn函数的典型用法代码示例。如果您正苦于以下问题：C++ BSP_LCD_DisplayOn函数的具体用法？C++ BSP_LCD_DisplayOn怎么用？C++ BSP_LCD_DisplayOn使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了BSP_LCD_DisplayOn函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: LCD_Config

/**
  * @brief  LCD configuration.
  * @param  None
  * @retval None
  */
static void LCD_Config(void)
{
  /* LCD Initialization */ 
  /* Two layers are used in this application simultaneously 
     so "LCD_MIN_PCLK" is recommended to programme the PCLK at 20 MHz */  
  BSP_LCD_InitEx(LCD_MIN_PCLK);
  
  /* LCD Layers Initialization */ 
  BSP_LCD_LayerDefaultInit(0, LCD_FB_START_ADDRESS);
  BSP_LCD_LayerDefaultInit(1, (LCD_FB_START_ADDRESS+(BSP_LCD_GetXSize()*BSP_LCD_GetYSize()*4)));
  
  /* Enable the LCD */ 
  BSP_LCD_DisplayOn();

  /* Set LCD Background Layer  */
  BSP_LCD_SelectLayer(0);
  /* Clear the Background Layer */
  BSP_LCD_Clear(LCD_COLOR_WHITE);

  /* Set LCD Foreground Layer  */
  BSP_LCD_SelectLayer(1);
  /* Clear the Foreground Layer */ 
  BSP_LCD_Clear(LCD_COLOR_BLACK); 

  /* Configure and enable the Color Keying feature */
  BSP_LCD_SetColorKeying(1, 0); 

  /* Configure the transparency for foreground: Increase the transparency */
  BSP_LCD_SetTransparency(1, 100);
}

开发者ID:acrepina，项目名称:STM32F7_serverWEB，代码行数:35，代码来源:main.c

示例2: lcd_init

void lcd_init(void) {

    BSP_LCD_Init();

    BSP_LCD_LayerDefaultInit(0, (uint32_t)LCD_FRAME_BUFFER);
    BSP_LCD_SelectLayer(0);
    BSP_LCD_Clear(LCD_COLOR_RED);
    BSP_LCD_SetBackColor(LCD_COLOR_RED);
    BSP_LCD_SetTextColor(LCD_COLOR_WHITE);

//     BSP_LCD_LayerDefaultInit(1, (uint32_t)LCD_FRAME_BUFFER + 76800);
//     BSP_LCD_SelectLayer(1);
//     BSP_LCD_Clear(LCD_COLOR_RED);
//     BSP_LCD_SetBackColor(LCD_COLOR_RED);
//     BSP_LCD_SetTextColor(LCD_COLOR_WHITE);

    BSP_LCD_SetLayerVisible(0, ENABLE);
//     BSP_LCD_SetLayerVisible(1, ENABLE);

    BSP_LCD_DisplayOn();

    for (int i = 0; i < LCD_SIZE; i ++) {
        lcd.screen[i] = ' ';
    }
    lcd.col = 0;
}

开发者ID:deadsy，项目名称:lidar_stm32f4，代码行数:26，代码来源:lcd.c

示例3: LCD_Config

/**
  * @brief  LCD configuration.
  * @param  None
  * @retval None
  */
static void LCD_Config(void)
{
  /* LCD Initialization */ 
  BSP_LCD_Init();

  /* LCD Layers Initialization */ 
  BSP_LCD_LayerDefaultInit(0, LCD_FB_START_ADDRESS);
  BSP_LCD_LayerDefaultInit(1, (LCD_FB_START_ADDRESS+(BSP_LCD_GetXSize()*BSP_LCD_GetYSize()*4)));
  
  /* Enable the LCD */ 
  BSP_LCD_DisplayOn();

  /* Set LCD Background Layer  */
  BSP_LCD_SelectLayer(0);
  /* Clear the Background Layer */
  BSP_LCD_Clear(LCD_COLOR_WHITE);

  /* Set LCD Foreground Layer  */
  BSP_LCD_SelectLayer(1);
  /* Clear the Foreground Layer */ 
  BSP_LCD_Clear(LCD_COLOR_BLACK); 

  /* Configure and enable the Color Keying feature */
  BSP_LCD_SetColorKeying(1, 0); 

  /* Configure the transparency for foreground: Increase the transparency */
  BSP_LCD_SetTransparency(1, 100);
}

开发者ID:451506709，项目名称:automated_machine，代码行数:33，代码来源:main.c

示例4: HID_InitApplication

/**
  * @brief  HID application Init.
  * @param  None
  * @retval None
  */
static void HID_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_EXTI);
  
  /* Configure LED1*/
  BSP_LED_Init(LED1);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Select the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enable the display */
  BSP_LCD_DisplayOn();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS HID Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS HID Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start HID Interface */
  USBH_UsrLog("Starting HID Demo");
  HID_MenuInit();
}

开发者ID:MrZANE42，项目名称:verisure1512，代码行数:40，代码来源:main.c

示例5: DUAL_InitApplication

/**
  * @brief  DUALCORE application Init.
  * @param  None
  * @retval None
  */
static void DUAL_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_GPIO);                
  
  /* Configure LED1 */
  BSP_LED_Init(LED1);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Selects the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enables the display */
  BSP_LCD_DisplayOn();
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)" USB OTG DualCore Host");
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start DualCore Interface */
  USBH_UsrLog("Initializing hardware....");
  DUAL_MenuInit(); 
}

开发者ID:acrepina，项目名称:STM32F7_serverWEB，代码行数:36，代码来源:main.c

示例6: LCD_Config

/**
  * @brief  LCD configuration
  * @param  None
  * @retval None
  */
static void LCD_Config(void)
{
  /* LCD Initialization */ 
  /* Two layers are used in this application but not simultaneously 
     so "LCD_MAX_PCLK" is recommended to programme the maximum PCLK = 25,16 MHz */
  BSP_LCD_Init();

  /* LCD Initialization */ 
  BSP_LCD_LayerDefaultInit(0, LCD_FB_START_ADDRESS);
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS+(BSP_LCD_GetXSize()*BSP_LCD_GetYSize()*4));

  /* Enable the LCD */ 
  BSP_LCD_DisplayOn(); 
  
  /* Select the LCD Background Layer  */
  BSP_LCD_SelectLayer(0);

  /* Clear the Background Layer */ 
  BSP_LCD_Clear(LCD_COLOR_BLACK);  
  
  /* Select the LCD Foreground Layer  */
  BSP_LCD_SelectLayer(1);

  /* Clear the Foreground Layer */ 
  BSP_LCD_Clear(LCD_COLOR_BLACK);
  
  /* Configure the transparency for foreground and background :
     Increase the transparency */
  BSP_LCD_SetTransparency(0, 0);
  BSP_LCD_SetTransparency(1, 100);
}

开发者ID:acrepina，项目名称:STM32F7_serverWEB，代码行数:36，代码来源:main.c

示例7: DynamicSwitch_InitApplication

/**
  * @brief  DS application Init.
  * @param  None
  * @retval None
  */
static void DynamicSwitch_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_GPIO);                 
  
  /* Configure LED1 */
  BSP_LED_Init(LED1);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Selects the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enables the display */
  BSP_LCD_DisplayOn();
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB HS DynamicSwitch Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB FS DynamicSwitch Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start Dynamic Switch Interface */
  LCD_UsrLog("Starting DynamicSwitch Demo\n");
  LCD_UsrLog("Plug your device To Continue...\n");
}

开发者ID:RadMie，项目名称:STM32F7DiscoveryBase，代码行数:40，代码来源:main.c

示例8: MSC_InitApplication

/**
  * @brief  MSC application Init.
  * @param  None
  * @retval None
  */
static void MSC_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_WAKEUP, BUTTON_MODE_EXTI);
      
  /* Configure LED1 */
  BSP_LED_Init(LED1);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Select the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enable the display */
  BSP_LCD_DisplayOn();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS MSC Host");
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Initialize menu and MSC process */
  Menu_Init();
}

开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:34，代码来源:main.c

示例9: main

/**
  * @brief  Main program
  * @param  None
  * @retval None
  */
int main(void)
{
  /* STM32F4xx HAL library initialization:
       - Configure the Flash prefetch, instruction and Data caches
       - Configure the Systick to generate an interrupt each 1 msec
       - Set NVIC Group Priority to 4
       - Global MSP (MCU Support Package) initialization
     */
  HAL_Init();
  
  /* Configure the system clock to 168 MHz */
  SystemClock_Config(); 
    
  /* Configure LED1 and LED3 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED3);
  
  /*##-1- LCD Initialization #################################################*/ 
  /* Initialize the LCD */
  BSP_LCD_Init();
 
  /* Enable the LCD */
  BSP_LCD_DisplayOn();

  /* Clear the LCD Background layer */
  BSP_LCD_Clear(LCD_COLOR_WHITE);

  /*##-2- Touch screen initialization ########################################*/
  Touchscreen_Calibration();
  BSP_TS_Init(BSP_LCD_GetXSize(), BSP_LCD_GetYSize());
 
  /*##-3- Link the SD Card disk I/O driver ###################################*/
  if(FATFS_LinkDriver(&SD_Driver, SDPath) != 0) 
  {
    /* FatFs Initialization Error */
    Error_Handler();
  }
  
  /* Create a FAT file system (format) on the logical drive */
  f_mkfs((TCHAR const*)SDPath, 0, 0);
  
  /*##-4- Register the file system object to the FatFs module ################*/
  if(f_mount(&SDFatFs, (TCHAR const*)SDPath, 0) != FR_OK)
  {
    /* FatFs Initialization Error */
    Error_Handler();
  }  
  
  /*##-5- Draw the menu ######################################################*/
  Draw_Menu();  

  /* Infinite loop */  
  while (1)
  { 
  /*##-6- Configure the touch screen and Get the position ####################*/    
    GetPosition();
  }
}

开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:63，代码来源:main.c

示例10: main

/**
  * @brief  Main program
  * @param  None
  * @retval None
  */
int main(void)
{
  uint32_t  i;
  uint32_t  *ptrLcd; 

  /* Enable the CPU Cache */
  CPU_CACHE_Enable();
	
  /* STM32F7xx HAL library initialization:
       - Configure the Flash ART accelerator on ITCM interface
       - Systick timer is configured by default as source of time base, but user 
         can eventually implement his proper time base source (a general purpose 
         timer for example or other time source), keeping in mind that Time base 
         duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and 
         handled in milliseconds basis.
       - Set NVIC Group Priority to 4
       - Low Level Initialization
     */
  HAL_Init();

  /* Configure the system clock to 200 MHz */
  SystemClock_Config();
  
  /*##-1- Initialise the LCD #################################################*/
  BSP_LCD_Init();

  /* Init LCD screen buffer */
  ptrLcd = (uint32_t*)(LCD_FRAME_BUFFER);
  for (i=0; i<(BSP_LCD_GetXSize()*BSP_LCD_GetYSize()); i++)
  {
    ptrLcd[i]=0;
  }

  BSP_LCD_LayerDefaultInit(1, LCD_FRAME_BUFFER);

  /* Enable the LCD */
  BSP_LCD_DisplayOn();

  /* Select the LCD Foreground layer */
  BSP_LCD_SelectLayer(1);

  /* Set active window */
  BSP_LCD_SetLayerWindow(1, xoffset, yoffset, xsize, ysize);
  
  /*##-2- Camera Initialisation and start capture ############################*/
  /* Initialize the Camera */
  BSP_CAMERA_Init(resolution);

  /* Wait 1s before Camera snapshot */
  HAL_Delay(1000);

  /* Start the Camera Capture */
  BSP_CAMERA_SnapshotStart((uint8_t *)CAMERA_FRAME_BUFFER);

  while (1)
  {
  }
}

开发者ID:RadMie，项目名称:STM32F7DiscoveryBase，代码行数:63，代码来源:main.c

示例11: main

int main(void)
{
	HAL_Init();

	/* Configure the system clock */
	SystemClock_Config();

	BSP_LCD_Init();
	BSP_LCD_LayerDefaultInit(1, (uint32_t) LCD_FRAME_BUFFER);
	BSP_LCD_SetLayerVisible(1, ENABLE);

	BSP_LCD_SelectLayer(1);
	BSP_LCD_Clear(LCD_COLOR_WHITE);
	BSP_LCD_SetBackColor(LCD_COLOR_WHITE);
	BSP_LCD_SetTextColor(LCD_COLOR_BLACK);
	BSP_LCD_DisplayOn();

	BSP_LCD_DisplayStringAtLine(0, (uint8_t *) "Hello FreeRTOS");

	#define LED_TASK_PRIORITY ((1 + tskIDLE_PRIORITY) | portPRIVILEGE_BIT)
	#define LCD_TASK_PRIORITY ((1 + tskIDLE_PRIORITY) | portPRIVILEGE_BIT)
	#define LED_TASK_PRIORITY_LOW ((1 + tskIDLE_PRIORITY) | portPRIVILEGE_BIT)
	#define LED_TASK_PRIORITY_HIGH ((2 + tskIDLE_PRIORITY) | portPRIVILEGE_BIT)

	//xTaskCreate( (pdTASK_CODE)test_task_delay, 	"test", configMINIMAL_STACK_SIZE, 0, LED_TASK_PRIORITY, NULL);
	//xTaskCreate( (pdTASK_CODE)test_task_delay_until, 	"test", configMINIMAL_STACK_SIZE, 0, LED_TASK_PRIORITY, NULL);

	/*std::stringstream output;
	std::string outputstring;
	const char * chararray;
	output.str(std::string());
	output << "Counter: " << 0;
	outputstring = "";
	outputstring = output.str();
	chararray = "";
	chararray = outputstring.c_str();
	BSP_LCD_DisplayStringAtLine (1, (uint8_t *) chararray);*/

	//xTaskCreate( (pdTASK_CODE)led1_task, 	"led1", 256, 0, LED_TASK_PRIORITY, NULL);
	//xTaskCreate( (pdTASK_CODE)led2_task, 	"led2", 256, 0, LED_TASK_PRIORITY, NULL);
	//xTaskCreate( (pdTASK_CODE)lcd_task, 	"lcd", 256, 0, LCD_TASK_PRIORITY, NULL);

	xTaskCreate( (pdTASK_CODE)led1_task_timeslicing, 	"led1", 256, 0, LED_TASK_PRIORITY, NULL);
	xTaskCreate( (pdTASK_CODE)led2_task_timeslicing, 	"led2", 256, 0, LED_TASK_PRIORITY+1, NULL); // was LED_TASK_PRIORITY

	//job_descriptor blink1_job_descriptor = job_descriptor(1000/3, LED3);
	//xTaskCreate( (pdTASK_CODE)blink1_task, 	"led3", 256, &blink1_job_descriptor, LED_TASK_PRIORITY, NULL);

	//job_descriptor blink2_job_descriptor = job_descriptor(2000/3, LED4);
	//xTaskCreate( (pdTASK_CODE)blink2_task, 	"led4", 256, &blink2_job_descriptor, LED_TASK_PRIORITY, NULL);

	//xTaskCreate( (pdTASK_CODE)blink_task_low_priority, 	"led3", 256, 0, LED_TASK_PRIORITY_LOW, NULL);
	//xTaskCreate( (pdTASK_CODE)blink_task_high_priority, 	"led4", 256, 0, LED_TASK_PRIORITY_HIGH, NULL);

	vTaskStartScheduler ();
	return 0;
}

开发者ID:Alexander-Wilms，项目名称:STM32F429I-DISCO，代码行数:57，代码来源:main.cpp

示例12: AUDIO_InitApplication

/**
  * @brief  Audio Application Init.
  * @param  None
  * @retval None
  */
static void AUDIO_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_EXTI);              
  
  /* Configure IO and LED1 */
  BSP_IO_Init();
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED4);
 
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Camera has to be powered down as some signals use same GPIOs between
   * I2S signals and camera bus. Camera drives its signals to low impedance
   * when powered ON. So the camera is powered off to let its signals
   * in high impedance */

  /* Camera power down sequence */
  BSP_IO_ConfigPin(RSTI_PIN, IO_MODE_OUTPUT);
  BSP_IO_ConfigPin(XSDN_PIN, IO_MODE_OUTPUT);

  /* De-assert the camera STANDBY pin (active high) */
  BSP_IO_WritePin(XSDN_PIN, BSP_IO_PIN_RESET);

  /* Assert the camera RSTI pin (active low) */
  BSP_IO_WritePin(RSTI_PIN, BSP_IO_PIN_RESET);

  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Select the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enable the display */
  BSP_LCD_DisplayOn();
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)"Audio Playback and Record Application");
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start Audio interface */
  USBH_UsrLog("Starting Audio Demo");
  
  /* Init Audio interface */
  AUDIO_PLAYER_Init();
  
  /* Start Audio interface */
  AUDIO_MenuInit();
}

开发者ID:acrepina，项目名称:STM32F7_serverWEB，代码行数:61，代码来源:main.c

示例13: BSP_LCD_Init

/**
  * @brief  Initializes the LCD.
  * @retval LCD state
  */
uint8_t BSP_LCD_Init(void)
{
    /* Timing Configuration */
    ltdc_handle.Init.HorizontalSync = (RK043FN48H_HSYNC - 1);
    ltdc_handle.Init.VerticalSync = (RK043FN48H_VSYNC - 1);
    ltdc_handle.Init.AccumulatedHBP = (RK043FN48H_HSYNC + RK043FN48H_HBP - 1);
    ltdc_handle.Init.AccumulatedVBP = (RK043FN48H_VSYNC + RK043FN48H_VBP - 1);
    ltdc_handle.Init.AccumulatedActiveH = (RK043FN48H_HEIGHT + RK043FN48H_VSYNC + RK043FN48H_VBP - 1);
    ltdc_handle.Init.AccumulatedActiveW = (RK043FN48H_WIDTH + RK043FN48H_HSYNC + RK043FN48H_HBP - 1);
    ltdc_handle.Init.TotalHeigh = (RK043FN48H_HEIGHT + RK043FN48H_VSYNC + RK043FN48H_VBP + RK043FN48H_VFP - 1);
    ltdc_handle.Init.TotalWidth = (RK043FN48H_WIDTH + RK043FN48H_HSYNC + RK043FN48H_HBP + RK043FN48H_HFP - 1);

    /* LCD clock configuration */
    BSP_LCD_ClockConfig(&ltdc_handle, NULL);

    /* Initialize the LCD pixel width and pixel height */
    ltdc_handle.LayerCfg->ImageWidth  = RK043FN48H_WIDTH;
    ltdc_handle.LayerCfg->ImageHeight = RK043FN48H_HEIGHT;

    /* Background value */
    ltdc_handle.Init.Backcolor.Blue = 0;
    ltdc_handle.Init.Backcolor.Green = 0;
    ltdc_handle.Init.Backcolor.Red = 0;

    /* Polarity */
    ltdc_handle.Init.HSPolarity = LTDC_HSPOLARITY_AL;
    ltdc_handle.Init.VSPolarity = LTDC_VSPOLARITY_AL;
    ltdc_handle.Init.DEPolarity = LTDC_DEPOLARITY_AL;
    ltdc_handle.Init.PCPolarity = LTDC_PCPOLARITY_IPC;
    ltdc_handle.Instance = LTDC;

    if (HAL_LTDC_GetState(&ltdc_handle) == HAL_LTDC_STATE_RESET) {
        BSP_LCD_MspInit(&ltdc_handle, NULL);
    }

    HAL_LTDC_Init(&ltdc_handle);

    /* allocate the framebuffer */
    size_t fb_size_pages = PAGE_ALIGN(RK043FN48H_WIDTH * RK043FN48H_HEIGHT * 4) / PAGE_SIZE;
    void *fb_address = novm_alloc_pages(fb_size_pages, NOVM_ARENA_SECONDARY);
    if (!fb_address)
        panic("failed to allocate framebuffer for LCD\n");

    BSP_LCD_LayerDefaultInit(0, (uint32_t)fb_address);
    BSP_LCD_SelectLayer(0);

    /* clear framebuffer */
    memset((void *)ltdc_handle.LayerCfg[active_layer].FBStartAdress, 0,
           BSP_LCD_GetXSize() * BSP_LCD_GetYSize() * BSP_LCD_PixelSize());

    /* turn the display on */
    BSP_LCD_DisplayOn();
    return LCD_OK;
}

开发者ID:david-dee，项目名称:lk，代码行数:58，代码来源:lcd.c

示例14: main

int main(void)
{

  HAL_Init();

  SystemClock_Config();


  MX_GPIO_Init();
  MX_ADC1_Init();
  MX_DMA2D_Init();
  MX_FMC_Init();
  MX_I2C3_Init();
  MX_LTDC_Init();
  MX_RNG_Init();
  MX_SPI5_Init();

	BSP_LCD_Init();
	BSP_LCD_LayerDefaultInit(LCD_BACKGROUND_LAYER, LCD_FRAME_BUFFER);
	BSP_LCD_LayerDefaultInit(LCD_FOREGROUND_LAYER, LCD_FRAME_BUFFER);
	BSP_LCD_SelectLayer(LCD_FOREGROUND_LAYER);
	BSP_LCD_Clear(LCD_COLOR_BLACK);
	BSP_LCD_DisplayOn();
	uint8_t Button_Value;
	GPIO_InitTypeDef GPIO_InitStruct;
  GPIO_InitStruct.Pin |= GPIO_PIN_0;
  GPIO_InitStruct.Mode = 0x00;
  GPIO_InitStruct.Pull = 0x02;
  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
	while (1)
		{
		
		for(uint16_t i = 0; i < SIZE; i+=2) {
			HAL_ADC_Start(&hadc1);
			HAL_ADC_PollForConversion(&hadc1,1000); 
			samples[i] = HAL_ADC_GetValue(&hadc1);
			samples[i+1] = 0;
			HAL_ADC_Stop(&hadc1);
		}
		
		Button_Value = HAL_GPIO_ReadPin(GPIOA, GPIO_PIN_0);
		if( Button_Value )
		{		
			fft();
			
		}
		else
		{
		
			display_samples(samples);

		}
	}
}

开发者ID:jifwin，项目名称:auk_project，代码行数:54，代码来源:main.c

示例15: main

/**
  * @brief   Main program
  * @param  None
  * @retval None
  */
int main(void)
{
  /* STM32F4xx HAL library initialization:
       - Configure the Flash prefetch, instruction and Data caches
       - Configure the Systick to generate an interrupt each 1 msec
       - Set NVIC Group Priority to 4
       - Global MSP (MCU Support Package) initialization
     */
  HAL_Init();
  
  /* Configure the system clock to 180 MHz */
  SystemClock_Config();

  /*##-1- Disable SAI1_SDA signal ############################################*/  
  /* Note: In STM324X9I-EVAL RevB, PE6 pin is shared between data_7 of camera 
           and SAI1_SDA of codec WM8994, after power on, SAI1_SDA pin of codec WM8994 
           is in output state, thus preventing MCU from Receiving correct signal 
           from camera, so we need to configure SAI1_SDA pin of codec WM8994 
           in tri-state 
  */
  /* Initialize the Control interface of the Audio Codec */
  BSP_AUDIO_OUT_Init(OUTPUT_DEVICE_SPEAKER, 0, 0);  
  /* ADCDAT1 is tri-stated */
  AUDIO_IO_Write(AUDIO_I2C_ADDRESS, 0x200, 0);
  AUDIO_IO_Write(AUDIO_I2C_ADDRESS, 0x300, 0x6010); 
  
  /*##-2- Initialize the LCD #################################################*/
  BSP_LCD_Init();
  
  /*##-3- Initialize the LCD Layers ##########################################*/
  BSP_LCD_LayerDefaultInit(1, LCD_FRAME_BUFFER);
  
  /* Enable the LCD */
  BSP_LCD_DisplayOn();
  
  /* Select the LCD Foreground layer */
  BSP_LCD_SelectLayer(1);

  /*##-4- Camera Initialization and start capture ############################*/
  /* Initialize the Camera */
  BSP_CAMERA_Init(RESOLUTION_R480x272);
  
  /* Wait 1s before Camera snapshot */
  HAL_Delay(1000);
  
  /* Start the Camera Capture */
  BSP_CAMERA_SnapshotStart((uint8_t *)CAMERA_FRAME_BUFFER);

  /* Infinite loop */
  while (1)
  {
  }
}

开发者ID:451506709，项目名称:automated_machine，代码行数:58，代码来源:main.c

示例16: initializeHardware

void initializeHardware() {
	HAL_Init();

	BSP_LED_Init(LED3);
	BSP_LED_Init(LED4);
	BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);

	BSP_LED_On(LED3);
	BSP_LED_Off(LED4);

	BSP_LCD_Init();
	BSP_LCD_LayerDefaultInit(LCD_BACKGROUND_LAYER, LCD_FRAME_BUFFER);
	BSP_LCD_SetLayerVisible(LCD_BACKGROUND_LAYER, ENABLE);
	BSP_LCD_SelectLayer(LCD_BACKGROUND_LAYER);
	BSP_LCD_DisplayOn();
}

开发者ID:saeedhadi，项目名称:stm32f4-freertos-starter，代码行数:16，代码来源:main.c

示例17: CDC_InitApplication

/**
  * @brief  CDC application Init.
  * @param  None
  * @retval None
  */
static void CDC_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_EXTI); 
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Selects the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enables the display */
  BSP_LCD_DisplayOn();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS CDC Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS CDC Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start CDC Interface */
  USBH_UsrLog("Starting CDC Demo");
  
  Menu_Init();
  /* Initialize microSD */
  if (SD_StorageInit() == 0)
  {
    SD_StorageParse();
  }
}

开发者ID:nidhiyanandh，项目名称:STM32Cube_FW_F4_V1.5.0_GCC_Makefile，代码行数:52，代码来源:main.c

示例18: MTP_InitApplication

/**
  * @brief  MTP application Init.
  * @param  None
  * @retval None
  */
static void MTP_InitApplication(void)
{
  /* Configure KEY Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_EXTI);              
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure the LEDs */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialisation */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /*Selects the LCD Layer*/
  BSP_LCD_SelectLayer(1);
  
  /*Enables the display*/
  BSP_LCD_DisplayOn();
  
  /*Init the LCD Log module*/
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS MTP Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS MTP Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start MTP Interface */
  USBH_UsrLog("Starting MTP Demo");
  
  /* Init Audio interface */
  AUDIO_Init();
  
  /* Start MTP Interface */
  MTP_MenuInit();
}

开发者ID:EarnestHein89，项目名称:STM32Cube_FW_F4，代码行数:51，代码来源:main.c

示例19: AUDIO_InitApplication

/**
  * @brief  Audio Application Init.
  * @param  None
  * @retval None
  */
static void AUDIO_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_EXTI);              
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure the LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Select the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enable the display */
  BSP_LCD_DisplayOn();
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)"Audio Playback and Record Application");
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start Audio interface */
  USBH_UsrLog("Starting Audio Demo");
  
  /* Init Audio interface */
  AUDIO_PLAYER_Init();
  
  /* Start Audio interface */
  AUDIO_MenuInit();
}

开发者ID:eemei，项目名称:library-stm32f4，代码行数:47，代码来源:main.c

示例20: LCD_Config

static void LCD_Config(void)
{
  /* LCD Initialization */
  BSP_LCD_Init();

  /* LCD Initialization */
  BSP_LCD_LayerDefaultInit(0, LCD_FB_START_ADDRESS);

  /* Enable the LCD */
  BSP_LCD_DisplayOn();

  /* Select the LCD Background Layer  */
  BSP_LCD_SelectLayer(0);

  /* Clear the Background Layer */
  BSP_LCD_Clear(LCD_COLOR_BLACK);

  /* Configure the transparency for background */
  BSP_LCD_SetTransparency(0, 100);
}

开发者ID:Analias，项目名称:stm32-discof7，代码行数:20，代码来源:main.c

注：本文中的BSP_LCD_DisplayOn函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ BSP_LCD_DisplayStringAt函数代码示例发布时间：2022-05-30

C++ BSP_LCD_DisplayChar函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18334|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9702|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8193|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8560|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8471|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9412|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8443|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7875|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8427|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7403|2022-11-06

客服电话

电子邮件

C++ BSP_LCD_DisplayOn函数代码示例

示例1: LCD_Config

示例2: lcd_init

示例3: LCD_Config

示例4: HID_InitApplication

示例5: DUAL_InitApplication

示例6: LCD_Config

示例7: DynamicSwitch_InitApplication

示例8: MSC_InitApplication

示例9: main

示例10: main

示例11: main

示例12: AUDIO_InitApplication

示例13: BSP_LCD_Init

示例14: main

示例15: main

示例16: initializeHardware

示例17: CDC_InitApplication

示例18: MTP_InitApplication

示例19: AUDIO_InitApplication

示例20: LCD_Config

请发表评论

全部评论

上一篇：

下一篇：

theindianappguy/machine_learning_flutter

samaxes/minify-maven-plugin: Combine and

挨打的读音是什么？是āi dǎ还是ái dǎ？

微信小程序公告滚动通知 - 子钦加油

nacika-ins/nanachibot: nanachibot is Rus

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053