C++ BSP_LCD_Init函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中BSP_LCD_Init函数的典型用法代码示例。如果您正苦于以下问题：C++ BSP_LCD_Init函数的具体用法？C++ BSP_LCD_Init怎么用？C++ BSP_LCD_Init使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了BSP_LCD_Init函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: DynamicSwitch_InitApplication

/**
  * @brief  DS application Init.
  * @param  None
  * @retval None
  */
static void DynamicSwitch_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_GPIO);                 
  
  /* Configure LED1 */
  BSP_LED_Init(LED1);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Selects the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enables the display */
  BSP_LCD_DisplayOn();
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB HS DynamicSwitch Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB FS DynamicSwitch Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start Dynamic Switch Interface */
  LCD_UsrLog("Starting DynamicSwitch Demo\n");
  LCD_UsrLog("Plug your device To Continue...\n");
}

开发者ID:RadMie，项目名称:STM32F7DiscoveryBase，代码行数:40，代码来源:main.c

示例2: LCD_Config

/**
  * @brief  LCD configuration
  * @param  None
  * @retval None
  */
static void LCD_Config(void)
{
  /* LCD Initialization */ 
  /* Two layers are used in this application but not simultaneously 
     so "LCD_MAX_PCLK" is recommended to programme the maximum PCLK = 25,16 MHz */
  BSP_LCD_Init();

  /* LCD Initialization */ 
  BSP_LCD_LayerDefaultInit(0, LCD_FB_START_ADDRESS);
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS+(BSP_LCD_GetXSize()*BSP_LCD_GetYSize()*4));

  /* Enable the LCD */ 
  BSP_LCD_DisplayOn(); 
  
  /* Select the LCD Background Layer  */
  BSP_LCD_SelectLayer(0);

  /* Clear the Background Layer */ 
  BSP_LCD_Clear(LCD_COLOR_BLACK);  
  
  /* Select the LCD Foreground Layer  */
  BSP_LCD_SelectLayer(1);

  /* Clear the Foreground Layer */ 
  BSP_LCD_Clear(LCD_COLOR_BLACK);
  
  /* Configure the transparency for foreground and background :
     Increase the transparency */
  BSP_LCD_SetTransparency(0, 0);
  BSP_LCD_SetTransparency(1, 100);
}

开发者ID:acrepina，项目名称:STM32F7_serverWEB，代码行数:36，代码来源:main.c

示例3: CDC_InitApplication

/**
  * @brief  CDC application Init
  * @param  None
  * @retval None
  */
static void CDC_InitApplication(void)
{
  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Configure KEY Button */
  BSP_PB_Init(BUTTON_WAKEUP, BUTTON_MODE_GPIO);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  BSP_LCD_LayerDefaultInit(0, LCD_FB_START_ADDRESS);
  BSP_LCD_SelectLayer(0);
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS CDC Host");
  LCD_UsrLog("USB Host library started.\n"); 
    
  /* Start CDC Interface */
  USBH_UsrLog("Starting CDC Demo");
  
  Menu_Init();
}

开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:32，代码来源:main.c

示例4: BSP_Init

/*-------------------------------------------------------
功能	: 初始化
输入	: void
返回	: void
Copyright : yitiandelan.
---------------------------------------------------------*/
void BSP_Init(void)
{
	BSP_OSC_Init();
	
	#if (configUSE_LED == 1)
	BSP_LED_Init();
	#endif
	#if (configUSE_DAC == 1)
	BSP_DAC_Init();
	#endif
	#if (configUSE_ADC123 == 1)
	BSP_ADC_Init();
	#endif
	#if (configUSE_ExternADC == 1)
	BSP_ADC_ex_Init();
	#endif
	#if (configUSE_LCD == 1)
	BSP_LCD_Init();
	#endif
	#if (configUSE_CODEC == 1)
	BSP_CODEC_Init();
	#endif
	#if (configUSE_PWM == 1)
	BSP_TIM3_Init();
	#endif
	#if (configUSE_RTT == 1)
	BSP_RTT_Init();
	#endif
	#if (configUSE_USB == 1)
	BSP_USB_Init();
	#endif
	#if (configUSE_MPU == 1)
	BSP_MPU_Init();
	#endif
}

开发者ID:yitiandelan，项目名称:MyF4Project，代码行数:41，代码来源:BSP.c

示例5: HID_InitApplication

/**
  * @brief  HID application Init.
  * @param  None
  * @retval None
  */
static void HID_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);                
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS HID Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS HID Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start HID Interface */
  USBH_UsrLog("Starting HID Demo");
  HID_MenuInit();
}

开发者ID:PaxInstruments，项目名称:STM32CubeF2，代码行数:37，代码来源:main.c

示例6: DynamicSwitch_InitApplication

/**
  * @brief  DS application Init.
  * @param  None
  * @retval None
  */
static void DynamicSwitch_InitApplication(void)
{
    /* Configure Key Button */
    BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_EXTI);

    /* Configure Joystick in EXTI mode */
    BSP_JOY_Init(JOY_MODE_EXTI);

    /* Configure LED1, LED2, LED3 and LED4 */
    BSP_LED_Init(LED1);
    BSP_LED_Init(LED2);
    BSP_LED_Init(LED3);
    BSP_LED_Init(LED4);

    /* Initialize the LCD */
    BSP_LCD_Init();

    /* Initialize the LCD Log module */
    LCD_LOG_Init();

#ifdef USE_USB_HS
    LCD_LOG_SetHeader((uint8_t *)" USB HS DynamicSwitch Host");
#else
    LCD_LOG_SetHeader((uint8_t *)" USB FS DynamicSwitch Host");
#endif

    LCD_UsrLog("USB Host library started.\n");

    /* Start Dynamic Switch Interface */
    LCD_UsrLog("Starting DynamicSwitch Demo\n");
    LCD_UsrLog("Plug your device To Continue...\n");
}

开发者ID:PaxInstruments，项目名称:STM32CubeF4，代码行数:37，代码来源:main.c

示例7: DUAL_InitApplication

/**
  * @brief  DUALCORE application Init.
  * @param  None
  * @retval None
  */
static void DUAL_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_GPIO);                
  
  /* Configure LED1 */
  BSP_LED_Init(LED1);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Selects the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enables the display */
  BSP_LCD_DisplayOn();
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)" USB OTG DualCore Host");
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start DualCore Interface */
  USBH_UsrLog("Initializing hardware....");
  DUAL_MenuInit(); 
}

开发者ID:acrepina，项目名称:STM32F7_serverWEB，代码行数:36，代码来源:main.c

示例8: Display_Init

/**
  * @brief  Display Init (LCD)
  * @param  None
  * @retval None
  */
static void Display_Init(void)
{
  /* Initialize the LCD */
  BSP_LCD_Init();

  /* Clear the LCD */ 
  BSP_LCD_Clear(LCD_COLOR_WHITE);
  
  /* Set LCD Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 80);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLUE); 
  BSP_LCD_SetFont(&Font24);
  BSP_LCD_DisplayStringAt(0, 0, (uint8_t*)MESSAGE1, CENTER_MODE);
  BSP_LCD_SetFont(&Font12);
  BSP_LCD_DisplayStringAt(0, 30, (uint8_t*)"ADC Low Power Mode", CENTER_MODE); 
  BSP_LCD_DisplayStringAt(0, 45, (uint8_t*)"Press Tamper push-button", CENTER_MODE); 
  BSP_LCD_DisplayStringAt(0, 60, (uint8_t*)MESSAGE3, CENTER_MODE); 

   /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);  
  BSP_LCD_DrawRect(10, 90, BSP_LCD_GetXSize() - 20, BSP_LCD_GetYSize()- 100);
  BSP_LCD_DrawRect(11, 91, BSP_LCD_GetXSize() - 22, BSP_LCD_GetYSize()- 102);

  BSP_LCD_SetFont(&Font24);
  BSP_LCD_SetBackColor(LCD_COLOR_WHITE); 
}

开发者ID:jmoyerman，项目名称:stm32f0_cube，代码行数:33，代码来源:main.c

示例9: HID_InitApplication

/**
  * @brief  HID application Init
  * @param  None
  * @retval None
  */
static void HID_InitApplication(void)
{
  /* Configure KEY Button */
  BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_GPIO);
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);

  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS HID Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS HID Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start HID Interface */
  HID_MenuInit();
}

开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:30，代码来源:main.c

示例10: HID_InitApplication

/**
  * @brief  HID application Init.
  * @param  None
  * @retval None
  */
static void HID_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_EXTI);
  
  /* Configure LED1*/
  BSP_LED_Init(LED1);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Select the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enable the display */
  BSP_LCD_DisplayOn();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS HID Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS HID Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start HID Interface */
  USBH_UsrLog("Starting HID Demo");
  HID_MenuInit();
}

开发者ID:MrZANE42，项目名称:verisure1512，代码行数:40，代码来源:main.c

示例11: DUAL_InitApplication

/**
  * @brief  DUALCORE application Init.
  * @param  None
  * @retval None
  */
static void DUAL_InitApplication(void)
{
  /* Configure KEY Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);                
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure the LEDs */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)" USB OTG DualCore Host");
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start DualCore Interface */
  USBH_UsrLog("Initializing hardware....");
  DUAL_MenuInit(); 
}

开发者ID:EarnestHein89，项目名称:STM32Cube_FW_F4，代码行数:33，代码来源:main.c

示例12: MSC_InitApplication

/**
  * @brief  MSC application Init.
  * @param  None
  * @retval None
  */
static void MSC_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_WAKEUP, BUTTON_MODE_EXTI);
      
  /* Configure LED1 */
  BSP_LED_Init(LED1);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Select the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enable the display */
  BSP_LCD_DisplayOn();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS MSC Host");
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Initialize menu and MSC process */
  Menu_Init();
}

开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:34，代码来源:main.c

示例13: MSC_InitApplication

/**
  * @brief  MSC application Init.
  * @param  None
  * @retval None
  */
static void MSC_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);

  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);

  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);

  /* Initialize the LCD */
  BSP_LCD_Init();
  BSP_LCD_LayerDefaultInit(0, LCD_FB_START_ADDRESS);
  BSP_LCD_SelectLayer(0);

  /* Init the LCD Log module */
  LCD_LOG_Init();

#ifdef USE_USB_HS
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS MSC Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS MSC Host");
#endif

  LCD_UsrLog("USB Host library started.\n");

  /* Initialize menu and MSC process */
  USBH_UsrLog("Starting MSC Demo");
  Menu_Init();
}

开发者ID:Joe-Merten，项目名称:Stm32-Tools-Evaluation，代码行数:39，代码来源:main.c

示例14: main

/**
  * @brief   Main program
  * @param  None
  * @retval None
  */
int main(void)
{
  /* STM32F4xx HAL library initialization:
       - Configure the Flash prefetch, instruction and Data caches
       - Configure the Systick to generate an interrupt each 1 msec
       - Set NVIC Group Priority to 4
       - Global MSP (MCU Support Package) initialization
     */
  HAL_Init();

  /* Configure the system clock to 168 MHz */
  SystemClock_Config();

  /*##-1- Initialize the SRAM ################################################*/
  BSP_SRAM_Init();

  /*##-2- Initialize the LCD #################################################*/
  BSP_LCD_Init();

  /*##-3- Camera Initialization and start capture ############################*/
  /* Initialize the Camera */
  BSP_CAMERA_Init(CAMERA_R320x240);

  /* Start the Camera Capture */
  BSP_CAMERA_ContinuousStart((uint8_t *)CAMERA_FRAME_BUFFER);

  /* Infinite loop */
  while (1)
  {
  }
}

开发者ID:Joe-Merten，项目名称:Stm32-Tools-Evaluation，代码行数:36，代码来源:main.c

示例15: LCD_Config

/**
  * @brief  LCD configuration.
  * @param  None
  * @retval None
  */
static void LCD_Config(void)
{
  /* LCD Initialization */ 
  BSP_LCD_Init();

  /* LCD Layers Initialization */ 
  BSP_LCD_LayerDefaultInit(0, LCD_FB_START_ADDRESS);
  BSP_LCD_LayerDefaultInit(1, (LCD_FB_START_ADDRESS+(BSP_LCD_GetXSize()*BSP_LCD_GetYSize()*4)));
  
  /* Enable the LCD */ 
  BSP_LCD_DisplayOn();

  /* Set LCD Background Layer  */
  BSP_LCD_SelectLayer(0);
  /* Clear the Background Layer */
  BSP_LCD_Clear(LCD_COLOR_WHITE);

  /* Set LCD Foreground Layer  */
  BSP_LCD_SelectLayer(1);
  /* Clear the Foreground Layer */ 
  BSP_LCD_Clear(LCD_COLOR_BLACK); 

  /* Configure and enable the Color Keying feature */
  BSP_LCD_SetColorKeying(1, 0); 

  /* Configure the transparency for foreground: Increase the transparency */
  BSP_LCD_SetTransparency(1, 100);
}

开发者ID:451506709，项目名称:automated_machine，代码行数:33，代码来源:main.c

示例16: MSC_InitApplication

/**
  * @brief  MSC application Init.
  * @param  None
  * @retval None
  */
static void MSC_InitApplication(void)
{
  /* Configure KEY Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);                
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure the LEDs */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS MSC Host");
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start MSC Interface */
  USBH_UsrLog("Starting MSC Demo");
  
  Menu_Init();
}

开发者ID:Lembed，项目名称:STM32CubeF1-mirrors，代码行数:34，代码来源:main.c

示例17: LCD_Config

/**
  * @brief  LCD configuration
  * @param  None
  * @retval None
  */
static void LCD_Config(void)
{
	uint8_t lcd_status = LCD_OK;

	/* LCD DSI initialization in mode Video Burst  */
	/* Initialize DSI LCD */
        //  BSP_LCD_InitEx(LCD_ORIENTATION_PORTRAIT); /* uncomment if Portrait orientation is needed */
        BSP_LCD_Init(); /* Uncomment if default config (landscape orientation) is needed */
        while(lcd_status != LCD_OK);
      
        BSP_LCD_LayerDefaultInit(0, LCD_FB_START_ADDRESS);
        BSP_LCD_LayerDefaultInit(1, LCD_BG_LAYER_ADDRESS);   

	/* Select the LCD Background Layer  */
	BSP_LCD_SelectLayer(LTDC_ACTIVE_LAYER_BACKGROUND);

	/* Clear the Background Layer */
	BSP_LCD_Clear(LCD_COLOR_BLACK);

	/* Select the LCD Foreground Layer  */
	BSP_LCD_SelectLayer(LTDC_ACTIVE_LAYER_FOREGROUND);

	/* Clear the Foreground Layer */
	BSP_LCD_Clear(LCD_COLOR_BLACK);

	/* Configure the transparency for foreground and background :
     Increase the transparency */
	BSP_LCD_SetTransparency(LTDC_ACTIVE_LAYER_BACKGROUND, 0);
	BSP_LCD_SetTransparency(LTDC_ACTIVE_LAYER_FOREGROUND, 100);
}

开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:35，代码来源:main.c

示例18: lcd_init

void lcd_init(void) {

    BSP_LCD_Init();

    BSP_LCD_LayerDefaultInit(0, (uint32_t)LCD_FRAME_BUFFER);
    BSP_LCD_SelectLayer(0);
    BSP_LCD_Clear(LCD_COLOR_RED);
    BSP_LCD_SetBackColor(LCD_COLOR_RED);
    BSP_LCD_SetTextColor(LCD_COLOR_WHITE);

//     BSP_LCD_LayerDefaultInit(1, (uint32_t)LCD_FRAME_BUFFER + 76800);
//     BSP_LCD_SelectLayer(1);
//     BSP_LCD_Clear(LCD_COLOR_RED);
//     BSP_LCD_SetBackColor(LCD_COLOR_RED);
//     BSP_LCD_SetTextColor(LCD_COLOR_WHITE);

    BSP_LCD_SetLayerVisible(0, ENABLE);
//     BSP_LCD_SetLayerVisible(1, ENABLE);

    BSP_LCD_DisplayOn();

    for (int i = 0; i < LCD_SIZE; i ++) {
        lcd.screen[i] = ' ';
    }
    lcd.col = 0;
}

开发者ID:deadsy，项目名称:lidar_stm32f4，代码行数:26，代码来源:lcd.c

示例19: MSC_InitApplication

/**
  * @brief  MSC application Init.
  * @param  None
  * @retval None
  */
static void MSC_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);                
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
    
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS MSC Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS MSC Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Initialize menu and MSC process */
  USBH_UsrLog("Starting MSC Demo");
  Menu_Init();
}

开发者ID:451506709，项目名称:automated_machine，代码行数:31，代码来源:main.c

示例20: main

/**
  * @brief  Main program
  * @param  None
  * @retval None
  */
int main(void)
{
 /* This sample code shows how to use STM32F4xx GPIO HAL API to toggle PG13 
     IOs (connected to LED3 on STM32F429i-Discovery board) 
    in an infinite loop.
    To proceed, 3 steps are required: */

  /* STM32F4xx HAL library initialization:
       - Configure the Flash prefetch, instruction and Data caches
       - Configure the Systick to generate an interrupt each 1 msec
       - Set NVIC Group Priority to 4
       - Global MSP (MCU Support Package) initialization
     */
  HAL_Init();

  /* -1- Initialize LEDs mounted on Discovery board */
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* -2- Configure the system clock */
  SystemClock_Config();
  
  /* -3- Configure EXTI Line0 (connected to PA0 pin) in interrupt mode */
  EXTILine0_Config();
  
  /*##-1- Initialize the LCD #################################################*/
  /* Initialize the LCD */
  BSP_LCD_Init();

  /* Initialise the LCD Layers */
  BSP_LCD_LayerDefaultInit(1, LCD_FRAME_BUFFER);

  /* Gleich bleibende Einstellenungen am LCD-Display */
  /* Set LCD Foreground Layer  */
  BSP_LCD_SelectLayer(1);

  BSP_LCD_SetFont(&LCD_DEFAULT_FONT);

  /* Clear the LCD */ 
  BSP_LCD_SetBackColor(LCD_COLOR_WHITE); 
  BSP_LCD_Clear(LCD_COLOR_WHITE);

  /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_DARKBLUE);  

  /* Display LCD messages */
  BSP_LCD_DisplayStringAt(0, 10, (uint8_t*)"GOLF CART", CENTER_MODE);
  BSP_LCD_SetFont(&Font16);
  BSP_LCD_DisplayStringAt(0, 35, (uint8_t*)"v in km/h", CENTER_MODE);  
  
  /* Infinite loop */
  while (1)
  {
      if (uAenderung) {
        GeschwindigkeitAufLCD(uAktuelleGeschwindigkeit_zehntelkmh);  
        uAenderung = 0;
      }
  }
}

开发者ID:vollmermen，项目名称:golfcart，代码行数:64，代码来源:main.c

注：本文中的BSP_LCD_Init函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ BSP_LCD_SelectLayer函数代码示例发布时间：2022-05-30

C++ BSP_LCD_GetYSize函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18334|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9702|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8193|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8560|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8471|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9412|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8443|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7875|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8427|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7403|2022-11-06

客服电话

电子邮件

C++ BSP_LCD_Init函数代码示例

示例1: DynamicSwitch_InitApplication

示例2: LCD_Config

示例3: CDC_InitApplication

示例4: BSP_Init

示例5: HID_InitApplication

示例6: DynamicSwitch_InitApplication

示例7: DUAL_InitApplication

示例8: Display_Init

示例9: HID_InitApplication

示例10: HID_InitApplication

示例11: DUAL_InitApplication

示例12: MSC_InitApplication

示例13: MSC_InitApplication

示例14: main

示例15: LCD_Config

示例16: MSC_InitApplication

示例17: LCD_Config

示例18: lcd_init

示例19: MSC_InitApplication

示例20: main

请发表评论

全部评论

上一篇：

下一篇：

theindianappguy/machine_learning_flutter

samaxes/minify-maven-plugin: Combine and

挨打的读音是什么？是āi dǎ还是ái dǎ？

微信小程序公告滚动通知 - 子钦加油

nacika-ins/nanachibot: nanachibot is Rus

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053