C++ BSP_LCD_SetFont函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中BSP_LCD_SetFont函数的典型用法代码示例。如果您正苦于以下问题：C++ BSP_LCD_SetFont函数的具体用法？C++ BSP_LCD_SetFont怎么用？C++ BSP_LCD_SetFont使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了BSP_LCD_SetFont函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: EEPROM_SetHint

/**
  * @brief  Display EEPROM Demo Hint
  * @param  None
  * @retval None
  */
static void EEPROM_SetHint(void)
{
  /* Clear the LCD */ 
  BSP_LCD_Clear(LCD_COLOR_WHITE);
  
  /* Set LCD Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 80);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLUE); 
  BSP_LCD_SetFont(&Font24);
  BSP_LCD_DisplayStringAt(0, 0, (uint8_t *)"EEPROM", CENTER_MODE);
  BSP_LCD_SetFont(&Font12);
  BSP_LCD_DisplayStringAt(0, 30, (uint8_t *)"This example shows the different", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 45, (uint8_t *)"EEPROM Features, use BUTTON", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 60, (uint8_t *)"to start EEPROM data transfer", CENTER_MODE);
  
  /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);  
  BSP_LCD_DrawRect(10, 90, BSP_LCD_GetXSize() - 20, BSP_LCD_GetYSize()- 100);
  BSP_LCD_DrawRect(11, 91, BSP_LCD_GetXSize() - 22, BSP_LCD_GetYSize()- 102);
}

开发者ID:PaxInstruments，项目名称:STM32CubeF2，代码行数:27，代码来源:eeprom.c

示例2: LCD_SetHint

/**
  * @brief  Display LCD demo hint
  * @param  None
  * @retval None
  */
static void LCD_SetHint(void)
{
  /* Clear the LCD */ 
  BSP_LCD_Clear(LCD_COLOR_WHITE);
  
  /* Set LCD Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 80);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLUE); 
  BSP_LCD_SetFont(&Font24);
  BSP_LCD_DisplayStringAt(0, 0, (uint8_t *)"LCD", CENTER_MODE);
  BSP_LCD_SetFont(&Font12);
  BSP_LCD_DisplayStringAt(0, 30, (uint8_t *)"This example shows the different", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 45, (uint8_t *)"LCD Features, use Key push-button", CENTER_MODE); 
  BSP_LCD_DisplayStringAt(0, 60, (uint8_t *)"to display next page", CENTER_MODE); 

   /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);  
  BSP_LCD_DrawRect(10, 90, BSP_LCD_GetXSize() - 20, BSP_LCD_GetYSize()- 100);
  BSP_LCD_DrawRect(11, 91, BSP_LCD_GetXSize() - 22, BSP_LCD_GetYSize()- 102);
 }

开发者ID:dazuo78，项目名称:TBall，代码行数:27，代码来源:lcd.c

示例3: HYGROMETER_SetHint

/**
  * @brief  Display Hygrometer Example Hint
  * @param  None
  * @retval None
  */
static void HYGROMETER_SetHint(void)
{
  /* Clear the LCD */ 
  BSP_LCD_Clear(LCD_COLOR_WHITE);
  
  /* Set LCD Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_DARKBLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 80);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_DARKBLUE); 
  BSP_LCD_SetFont(&Font24);
  BSP_LCD_DisplayStringAt(0, 0, (uint8_t*)"HYGROMETER EXAMPLE", CENTER_MODE);
  BSP_LCD_SetFont(&Font12);
  BSP_LCD_DisplayStringAt(0, 30, (uint8_t*)"This example shows how to make", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 45, (uint8_t*)"a hygrometer using", CENTER_MODE); 
  BSP_LCD_DisplayStringAt(0, 60, (uint8_t*)"the capacitive humidity sensor HS1101", CENTER_MODE); 

  /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_DARKBLUE);  
  BSP_LCD_DrawRect(10, 90, BSP_LCD_GetXSize()- 20, BSP_LCD_GetYSize() - 100);
  BSP_LCD_DrawRect(11, 91, BSP_LCD_GetXSize()- 22, BSP_LCD_GetYSize() - 102);
 }

开发者ID:eleciawhite，项目名称:STM32Cube，代码行数:27，代码来源:main.c

示例4: Joystick_SetHint

/**
  * @brief  Display joystick demo hint
  * @param  None
  * @retval None
  */
static void Joystick_SetHint(void)
{
  /* Clear the LCD */ 
  BSP_LCD_Clear(LCD_COLOR_WHITE);
  
  /* Set Joystick Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 80);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLUE); 
  BSP_LCD_SetFont(&Font24);
  BSP_LCD_DisplayStringAt(0, 0, (uint8_t *)"Joystick", CENTER_MODE);
  BSP_LCD_SetFont(&Font12);
  BSP_LCD_DisplayStringAt(0, 30, (uint8_t *)"Please use the joystick to move", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 45, (uint8_t *)"the pointer inside the rectangle", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 60, (uint8_t *)"Press Tamper push-button to switch to next menu", CENTER_MODE);
  
  /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);  
  BSP_LCD_DrawRect(10, 90, BSP_LCD_GetXSize() - 20, BSP_LCD_GetYSize()- 100);
  BSP_LCD_DrawRect(11, 91, BSP_LCD_GetXSize() - 22, BSP_LCD_GetYSize()- 102);
}

开发者ID:MrZANE42，项目名称:verisure1512，代码行数:27，代码来源:joystick.c

示例5: LCD_SetHint

/**
  * @brief  Display LCD demo hint
  * @param  None
  * @retval None
  */
static void LCD_SetHint(void)
{
  /* Clear the LCD */ 
  BSP_LCD_Clear(LCD_COLOR_WHITE);

  /* Clear the LCD */ 
  BSP_LCD_Clear(LCD_COLOR_WHITE);
  
  /* Set Joystick Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 55);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLUE); 
  BSP_LCD_SetFont(&Font24);

  BSP_LCD_SetFont(&Font12);
  BSP_LCD_DisplayStringAt(0, 10, (uint8_t *)"LCD Demo", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 25, (uint8_t *)"Use User BUTTON to", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 40, (uint8_t *)"display next page", CENTER_MODE);

  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_SetBackColor(LCD_COLOR_WHITE); 
}

开发者ID:PaxInstruments，项目名称:STM32CubeF2，代码行数:28，代码来源:lcd.c

示例6: AudioRec_SetHint

/**
  * @brief  Display Audio Record demo hint
  * @param  None
  * @retval None
  */
static void AudioRec_SetHint(void)
{
  /* Clear the LCD */
  BSP_LCD_Clear(LCD_COLOR_WHITE);

  /* Set Audio Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 90);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLUE);
  BSP_LCD_SetFont(&Font24);
  BSP_LCD_DisplayStringAt(0, 0, (uint8_t *)"AUDIO RECORD EXAMPLE", CENTER_MODE);
  BSP_LCD_SetFont(&Font12);
  BSP_LCD_DisplayStringAt(0, 30, (uint8_t *)"Press User button for next menu            ", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 45, (uint8_t *)"Click on Joystick to start recording       ", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 60, (uint8_t *)"Make sure jumpers are in the right state   ", CENTER_MODE);

  /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_DrawRect(10, 100, BSP_LCD_GetXSize() - 20, BSP_LCD_GetYSize() - 110);
  BSP_LCD_DrawRect(11, 101, BSP_LCD_GetXSize() - 22, BSP_LCD_GetYSize() - 112);

}

开发者ID:Lembed，项目名称:STM32CubeF4-mirrors，代码行数:28，代码来源:audio_rec.c

示例7: Audio_SetHint

/**
  * @brief  Display Audio demo hint
  * @param  None
  * @retval None
  */
static void Audio_SetHint(void)
{
  /* Clear the LCD */
  BSP_LCD_Clear(LCD_COLOR_WHITE);

  /* Set Audio Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 90);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLUE);
  BSP_LCD_SetFont(&Font24);
  BSP_LCD_DisplayStringAt(0, 0, (uint8_t *)"AUDIO EXAMPLE", CENTER_MODE);
  BSP_LCD_SetFont(&Font12);
  BSP_LCD_DisplayStringAt(0, 30, (uint8_t *)"Press User button for next menu", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 45, (uint8_t *)"Press Top/Bottom screen to change Volume   ", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 60, (uint8_t *)"Press Left/Right screen to change Frequency", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 75, (uint8_t *)"Press 2 fingers for Pause/Resume           ", CENTER_MODE);
  /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_DrawRect(10, 100, BSP_LCD_GetXSize() - 20, BSP_LCD_GetYSize() - 110);
  BSP_LCD_DrawRect(11, 101, BSP_LCD_GetXSize() - 22, BSP_LCD_GetYSize() - 112);

}

开发者ID:MrZANE42，项目名称:verisure1512，代码行数:28，代码来源:audio_play.c

示例8: TouchscreenCalibration_SetHint

/**
  * @brief  Display calibration hint
  * @param  None
  * @retval None
  */
static void TouchscreenCalibration_SetHint(void)
{
  /* Clear the LCD */ 
  BSP_LCD_Clear(LCD_COLOR_WHITE);
  
  /* Set Touchscreen Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_BLACK);
  BSP_LCD_SetBackColor(LCD_COLOR_WHITE);

  BSP_LCD_SetFont(&Font12);
  BSP_LCD_DisplayStringAt(0, BSP_LCD_GetYSize()/2 - 27, (uint8_t*)"Before using the Touchscreen", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, BSP_LCD_GetYSize()/2 - 12, (uint8_t*)"you need to calibrate it.", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, BSP_LCD_GetYSize()/2 + 3, (uint8_t*)"Press on the black circles", CENTER_MODE);
}

开发者ID:PaxInstruments，项目名称:STM32CubeF4，代码行数:19，代码来源:ts_calibration.c

示例9: Camera_SetHint

/**
  * @brief  Display Camera demo hint
  * @param  None
  * @retval None
  */
static void Camera_SetHint(void)
{
  /* Clear the LCD */
  BSP_LCD_Clear(LCD_COLOR_WHITE);

  /* Set Camera Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 90);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLUE);
  BSP_LCD_SetFont(&Font24);
  BSP_LCD_DisplayStringAt(0, 0, (uint8_t *)"CAMERA EXAMPLE", CENTER_MODE);
  BSP_LCD_SetFont(&Font12);
  BSP_LCD_DisplayStringAt(0, 30, (uint8_t *)"     Press 3 fingers for next resolution     ", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 45, (uint8_t *)"Press Top/Bottom screen to change brightness ", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 60, (uint8_t *)"Press Left/Right screen to change contrast   ", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 75, (uint8_t *)"Press 2 fingers to change visual effect      ", CENTER_MODE);

  /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_DrawRect(10, 100, BSP_LCD_GetXSize() - 20, BSP_LCD_GetYSize() - 110);
  BSP_LCD_DrawRect(11, 101, BSP_LCD_GetXSize() - 22, BSP_LCD_GetYSize() - 112);
}

开发者ID:acrepina，项目名称:STM32F7_serverWEB，代码行数:28，代码来源:camera.c

示例10: LCD_SetHint

/**
  * @brief  Display LCD demo hint
  * @param  None
  * @retval None
  */
static void LCD_SetHint(void)
{
  /* Clear the LCD */ 
  BSP_LCD_Clear(LCD_COLOR_WHITE);
  
  /* Set LCD Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 80);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLUE); 
  BSP_LCD_SetFont(&Font20);
  BSP_LCD_DisplayStringAt(0, 0, (uint8_t *)"LCD", CENTER_MODE);
  BSP_LCD_SetFont(&Font12);                  
  BSP_LCD_DisplayStringAt(0, 20, (uint8_t *)"This example shows", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 35, (uint8_t *)"LCD Features, use", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 50, (uint8_t *)"BUTTON to display", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 65, (uint8_t *)"next page", CENTER_MODE);
                          
  /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);  
  BSP_LCD_DrawRect(1, 82, BSP_LCD_GetXSize() - 3, BSP_LCD_GetYSize()- 84);
  BSP_LCD_DrawRect(2, 83, BSP_LCD_GetXSize() - 5, BSP_LCD_GetYSize()- 86);
 }

开发者ID:shjere，项目名称:common，代码行数:28，代码来源:lcd.c

示例11: Touchscreen_SetHint

/**
  * @brief  Display TS Demo Hint
  * @param  None
  * @retval None
  */
static void Touchscreen_SetHint(void)
{
  /* Clear the LCD */
  BSP_LCD_Clear(LCD_COLOR_WHITE);

  /* Set Touchscreen Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 80);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLUE);
  BSP_LCD_SetFont(&Font24);
  BSP_LCD_DisplayStringAt(0, 0, (uint8_t *)"Touchscreen", CENTER_MODE);
  BSP_LCD_SetFont(&Font12);
  BSP_LCD_DisplayStringAt(0, 30, (uint8_t *)"Please use the Touchscreen to", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 45, (uint8_t *)"fill the colored circles according to pressure applied", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 60, (uint8_t *)"Up to 5 finger touch coordinates are displayed", CENTER_MODE);

  /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_DrawRect(10, 90, BSP_LCD_GetXSize() - 20, BSP_LCD_GetYSize() - 100);
  BSP_LCD_DrawRect(11, 91, BSP_LCD_GetXSize() - 22, BSP_LCD_GetYSize() - 102);

}

开发者ID:acrepina，项目名称:STM32F7_serverWEB，代码行数:28，代码来源:touchscreen.c

示例12: Touchscreen_SetHint

/**
  * @brief  Display TS Demo Hint
  * @param  None
  * @retval None
  */
static void Touchscreen_SetHint(void)
{
  /* Clear the LCD */ 
  BSP_LCD_Clear(LCD_COLOR_WHITE);
  
  /* Set Touchscreen Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 80);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLUE); 
  BSP_LCD_SetFont(&Font24);
  BSP_LCD_DisplayStringAt(0, 0, (uint8_t *)"Touchscreen", CENTER_MODE);
  BSP_LCD_SetFont(&Font12);
  BSP_LCD_DisplayStringAt(0, 30, (uint8_t *)"Please use the Touchscreen to", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 45, (uint8_t *)"activate the colored circle", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 60, (uint8_t *)"inside the rectangle", CENTER_MODE);
  
  /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);  
  BSP_LCD_DrawRect(10, 90, BSP_LCD_GetXSize() - 20, BSP_LCD_GetYSize()- 100);
  BSP_LCD_DrawRect(11, 91, BSP_LCD_GetXSize() - 22, BSP_LCD_GetYSize()- 102);
   
}

开发者ID:MrZANE42，项目名称:verisure1512，代码行数:28，代码来源:touchscreen.c

示例13: BSP_Config

/**
  * @brief  Initializes the STM324x9I-EVAL's LCD and LEDs resources.
  * @param  None
  * @retval None
  */
static void BSP_Config(void)
{
#ifdef USE_LCD
  uint8_t lcd_status = LCD_OK;
#endif /* USE_LCD */


  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Init MFX IO Expander */
  BSP_IO_Init();
  
  /* Enable MFX IO Expander interrupt for ETH MII pin */
  BSP_IO_ConfigPin(MII_INT_PIN, IO_MODE_IT_FALLING_EDGE);
  
#ifdef USE_LCD

  /* Initialize and start the LCD display in mode 'lcd_mode'
   *  Using LCD_FB_START_ADDRESS as frame buffer displayed contents.
   *  This buffer is modified by the BSP (draw fonts, objects depending on BSP calls).
   */

  /* Set Portrait orientation if needed, by default orientation is set to
     Landscape */
  
  /* Initialize DSI LCD */
  //  BSP_LCD_InitEx(LCD_ORIENTATION_PORTRAIT); /* uncomment if Portrait orientation is needed */
  BSP_LCD_Init(); /* Uncomment if default config (landscape orientation) is needed */
  while(lcd_status != LCD_OK);

  BSP_LCD_LayerDefaultInit(0, LCD_FB_START_ADDRESS);   
  
  BSP_LCD_SetFont(&LCD_DEFAULT_FONT);
  
  /* Initialize LCD Log module */
  LCD_LOG_Init();
  
  /* Show Header and Footer texts */
  LCD_LOG_SetHeader((uint8_t *)"Webserver Application Netconn API");
  LCD_LOG_SetFooter((uint8_t *)"STM32469I-EVAL board");
  
  LCD_UsrLog ((char *)"  State: Ethernet Initialization ...\n");

#endif /* USE_LCD */
}

开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:54，代码来源:main.c

示例14: CEC_SetHint

/**
  * @brief  Display CEC test Hint
  * @param  None
  * @retval None
  */
static void CEC_SetHint(void)
{
  /* Clear the LCD */
  BSP_LCD_Clear(LCD_COLOR_WHITE);

  /* Set Touchscreen Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 110);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLUE);
  BSP_LCD_SetFont(&Font24);
  BSP_LCD_DisplayStringAt(0, 0, (uint8_t *)"HDMI CEC", CENTER_MODE);
  BSP_LCD_SetFont(&Font12);
  BSP_LCD_DisplayStringAt(0, 30, (uint8_t *)"Please use the Touchscreen to send CEC commands", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 45, (uint8_t *)"Touch top :    send opcode 44, operand 41", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 60, (uint8_t *)"Touch bottom : send opcode 44, operand 42", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 75, (uint8_t *)"Touch left :   send opcode 46            ", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 90, (uint8_t *)"Touch right :  send opcode 9F            ", CENTER_MODE);

  /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_DrawRect(10, 120, BSP_LCD_GetXSize() - 20, BSP_LCD_GetYSize() - 130);
  BSP_LCD_DrawRect(11, 121, BSP_LCD_GetXSize() - 22, BSP_LCD_GetYSize() - 132);
}

开发者ID:RadMie，项目名称:STM32F7DiscoveryBase，代码行数:29，代码来源:main.c

示例15: Display_DemoDescription

/**
  * @brief  Display main demo messages
  * @param  None
  * @retval None
  */
static void Display_DemoDescription(void)
{
  uint8_t desc[50];
  
  /* Set LCD Foreground Layer  */
  BSP_LCD_SelectLayer(1);
  
  BSP_LCD_SetFont(&LCD_DEFAULT_FONT);
  
  /* Clear the LCD */ 
  BSP_LCD_SetBackColor(LCD_COLOR_WHITE); 
  BSP_LCD_Clear(LCD_COLOR_WHITE);
  
  /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_DARKBLUE);  
  
  /* Display LCD messages */
  BSP_LCD_DisplayStringAt(0, 10, (uint8_t*)"STM32F429I BSP", CENTER_MODE);
  BSP_LCD_SetFont(&Font16);
  BSP_LCD_DisplayStringAt(0, 35, (uint8_t*)"Drivers examples", CENTER_MODE);
  
  /* Draw Bitmap */
  BSP_LCD_DrawBitmap((BSP_LCD_GetXSize() - 80)/2, 65, (uint8_t *)stlogo);
  
  BSP_LCD_SetFont(&Font8);
  BSP_LCD_DisplayStringAt(0, BSP_LCD_GetYSize()- 20, (uint8_t*)"Copyright (c) STMicroelectronics 2014", CENTER_MODE);
  
  BSP_LCD_SetFont(&Font12);
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_FillRect(0, BSP_LCD_GetYSize()/2 + 15, BSP_LCD_GetXSize(), 60);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLUE); 
  BSP_LCD_DisplayStringAt(0, BSP_LCD_GetYSize()/2 + 30, (uint8_t*)"Press User Button to start:", CENTER_MODE);
  sprintf((char *)desc,"%s example", BSP_examples[DemoIndex].DemoName);
  BSP_LCD_DisplayStringAt(0, BSP_LCD_GetYSize()/2 + 45, (uint8_t *)desc, CENTER_MODE);   
}

开发者ID:EarnestHein89，项目名称:STM32Cube_FW_F4，代码行数:41，代码来源:main.c

示例16: Display_Description

static void Display_Description(void){

	/* Set LCD Foreground Layer  */
	BSP_LCD_SelectLayer(LTDC_ACTIVE_LAYER);

	BSP_LCD_SetFont(&LCD_DEFAULT_FONT);

	/* Clear the LCD */
	BSP_LCD_SetBackColor(LCD_COLOR_WHITE);//Fondo de letras
	BSP_LCD_Clear(LCD_COLOR_WHITE);//Fondo de pantalla

	/* Set the LCD Text Color */
	BSP_LCD_SetTextColor(LCD_COLOR_DARKBLUE);

	/* Display LCD messages */
	BSP_LCD_DisplayStringAt(0, BSP_LCD_GetYSize()/2.5, (uint8_t *)"Detector de SD", CENTER_MODE);
	BSP_LCD_DisplayStringAt(0, (BSP_LCD_GetYSize()/2.5)+25, (uint8_t *)"Buscando...", CENTER_MODE);

	/* Draw Bitmap */
	//BSP_LCD_DrawBitmap((BSP_LCD_GetXSize() - 80) / 2, 65, (uint8_t *)stlogo);

	BSP_LCD_SetFont(&Font12); //Tamaño de letra
	BSP_LCD_DisplayStringAt(0, BSP_LCD_GetYSize() - 20, (uint8_t *)"Diseno Microcontroladores. Universidad De Sevilla", CENTER_MODE);
}

开发者ID:aescacena，项目名称:stm32f7，代码行数:24，代码来源:main.c

示例17: BSP_LCD_Init

/**
  * @brief  Initializes the LCD.
  * @retval LCD state
  */
uint8_t BSP_LCD_Init(void)
{ 
  uint8_t ret = LCD_ERROR;
  
  /* Default value for draw propriety */
  DrawProp.BackColor = 0xFFFF;
  DrawProp.pFont     = &Font24;
  DrawProp.TextColor = 0x0000;
  
  if(ili9320_drv.ReadID() == ILI9320_ID)
  {
    lcd_drv = &ili9320_drv;

    /* LCD Init */   
    lcd_drv->Init();
    
    /* Initialize the font */
    BSP_LCD_SetFont(&LCD_DEFAULT_FONT);

    ret = LCD_OK;
  }
  else if(ili9325_drv.ReadID() == ILI9325_ID)
  {
    lcd_drv = &ili9325_drv;

    /* LCD Init */   
    lcd_drv->Init();
    
    /* Initialize the font */
    BSP_LCD_SetFont(&LCD_DEFAULT_FONT);

    ret = LCD_OK;
  }
  
  return ret;
}

开发者ID:NjordCZ，项目名称:STM32Cube_FW_F1，代码行数:40，代码来源:stm3210c_eval_lcd.c

示例18: SDRAM_SetHint

/**
  * @brief  Display SDRAM Demo Hint
  * @param  None
  * @retval None
  */
static void SDRAM_SetHint(void)
{
  /* Clear the LCD */
  BSP_LCD_Clear(LCD_COLOR_WHITE);

  /* Set LCD Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 80);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLUE);
  BSP_LCD_SetFont(&Font24);
  BSP_LCD_DisplayStringAt(0, 0, (uint8_t *)"SDRAM", CENTER_MODE);
  BSP_LCD_SetFont(&Font12);
  BSP_LCD_DisplayStringAt(0, 30, (uint8_t *)"This example shows how to write", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 45, (uint8_t *)"and read data on SDRAM", CENTER_MODE);

  /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_DrawRect(10, 90, BSP_LCD_GetXSize() - 20, BSP_LCD_GetYSize() - 100);
  BSP_LCD_DrawRect(11, 91, BSP_LCD_GetXSize() - 22, BSP_LCD_GetYSize() - 102);

  BSP_LCD_SetTextColor(LCD_COLOR_BLACK);
  BSP_LCD_SetBackColor(LCD_COLOR_WHITE);
}

开发者ID:Joe-Merten，项目名称:Stm32-Tools-Evaluation，代码行数:29，代码来源:sdram.c

示例19: AppMain_About

/**
  * @brief  Run the About information 
  * @param  None.
  * @note   display About information.  
  * @retval None.
  */
static void AppMain_About(void)
{
  exit_func = 0;
  BSP_LCD_SetFont(&Font20);
  BSP_LCD_Clear(LCD_COLOR_BLUE);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  
  BSP_LCD_DisplayStringAt(0,2*Font20.Height, (uint8_t *)EVAL_BOARD, CENTER_MODE);
  BSP_LCD_DisplayStringAt(0,3*Font20.Height, (uint8_t *)"Demonstration", CENTER_MODE);
  
  BSP_LCD_DisplayStringAt(0,5*Font20.Height, (uint8_t *)DEMO_VERSION, CENTER_MODE);
  BSP_LCD_DisplayStringAt(0,6*Font20.Height, (uint8_t *)DEMO_DATE, CENTER_MODE);
  
  BSP_LCD_DisplayStringAt(0,8*Font20.Height, (uint8_t *)DEMO_INFO1, CENTER_MODE);
  BSP_LCD_DisplayStringAt(0,9*Font20.Height, (uint8_t *)DEMO_INFO2, CENTER_MODE);
  BSP_LCD_DisplayStringAt(0,10*Font20.Height, (uint8_t *)DEMO_INFO3, CENTER_MODE);
  while(exit_func==0);
}

开发者ID:jmoyerman，项目名称:stm32f0_cube，代码行数:24，代码来源:main_app.c

示例20: BSP_LCD_DrawCircle

/**
  * @brief  Draws a circle.
  * @param  Xpos: X position
  * @param  Ypos: Y position
  * @param  Radius: Circle radius
  * @retval None
  */
void BSP_LCD_DrawCircle(uint16_t Xpos, uint16_t Ypos, uint16_t Radius)
{
  int32_t  D;       /* Decision Variable */ 
  uint32_t  CurX;   /* Current X Value */
  uint32_t  CurY;   /* Current Y Value */ 
  
  D = 3 - (Radius << 1);
  CurX = 0;
  CurY = Radius;
  
  while (CurX <= CurY)
  {
    BSP_LCD_DrawPixel((Xpos + CurX), (Ypos - CurY), DrawProp.TextColor);

    BSP_LCD_DrawPixel((Xpos - CurX), (Ypos - CurY), DrawProp.TextColor);

    BSP_LCD_DrawPixel((Xpos + CurY), (Ypos - CurX), DrawProp.TextColor);

    BSP_LCD_DrawPixel((Xpos - CurY), (Ypos - CurX), DrawProp.TextColor);

    BSP_LCD_DrawPixel((Xpos + CurX), (Ypos + CurY), DrawProp.TextColor);

    BSP_LCD_DrawPixel((Xpos - CurX), (Ypos + CurY), DrawProp.TextColor);

    BSP_LCD_DrawPixel((Xpos + CurY), (Ypos + CurX), DrawProp.TextColor);

    BSP_LCD_DrawPixel((Xpos - CurY), (Ypos + CurX), DrawProp.TextColor);   

    /* Initialize the font */
    BSP_LCD_SetFont(&LCD_DEFAULT_FONT);

    if (D < 0)
    { 
      D += (CurX << 2) + 6;
    }
    else
    {
      D += ((CurX - CurY) << 2) + 10;
      CurY--;
    }
    CurX++;
  } 
}

开发者ID:PaulingZhou，项目名称:RM2016_0X3_SystemBoard，代码行数:50，代码来源:stm324xg_eval_lcd.c

注：本文中的BSP_LCD_SetFont函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ BSP_LED_Init函数代码示例发布时间：2022-05-30

C++ BSP_LCD_SelectLayer函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18335|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9702|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8193|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8560|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8472|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9412|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8443|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7875|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8427|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7403|2022-11-06

客服电话

电子邮件

C++ BSP_LCD_SetFont函数代码示例

示例1: EEPROM_SetHint

示例2: LCD_SetHint

示例3: HYGROMETER_SetHint

示例4: Joystick_SetHint

示例5: LCD_SetHint

示例6: AudioRec_SetHint

示例7: Audio_SetHint

示例8: TouchscreenCalibration_SetHint

示例9: Camera_SetHint

示例10: LCD_SetHint

示例11: Touchscreen_SetHint

示例12: Touchscreen_SetHint

示例13: BSP_Config

示例14: CEC_SetHint

示例15: Display_DemoDescription

示例16: Display_Description

示例17: BSP_LCD_Init

示例18: SDRAM_SetHint

示例19: AppMain_About

示例20: BSP_LCD_DrawCircle

请发表评论

全部评论

上一篇：

下一篇：

kojino/Harvard-Robust-Machine-Learning:

cescoffier/puppet-nexus: A Puppet Module

文的笔顺,诠释文的笔画,解读文的部首

Cassolotl/sentient.cloud · GitHub

blundell/release-android-library: Remote

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053