C++ BYTE1函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中BYTE1函数的典型用法代码示例。如果您正苦于以下问题：C++ BYTE1函数的具体用法？C++ BYTE1怎么用？C++ BYTE1使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了BYTE1函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1:

void ANO_DT::Send_Senser2(s32 alt_bar,u16 alt_csb)
{
	u8 _cnt=0;
	vs32 _temp;
	
	data_to_send[_cnt++]=0xAA;
	data_to_send[_cnt++]=0xAA;
	data_to_send[_cnt++]=0x07;
	data_to_send[_cnt++]=0;
	
	_temp = alt_bar;
	data_to_send[_cnt++]=BYTE3(_temp);
	data_to_send[_cnt++]=BYTE2(_temp);
	data_to_send[_cnt++]=BYTE1(_temp);
	data_to_send[_cnt++]=BYTE0(_temp);
	_temp = alt_csb;
	data_to_send[_cnt++]=BYTE1(_temp);
	data_to_send[_cnt++]=BYTE0(_temp);

	data_to_send[3] = _cnt-4;
	
	u8 sum = 0;
	for(u8 i=0;i<_cnt;i++)
		sum += data_to_send[i];
	data_to_send[_cnt++] = sum;
	
	Send_Data(data_to_send, _cnt);
}

开发者ID:YuMeiLau，项目名称:UAV，代码行数:28，代码来源:ANO_DT.cpp

示例2: write_multibyte

static void write_multibyte(long i)
{
    if (BYTE1(i) != 0) buffer[last++] = BYTE1(i);
    if (BYTE2(i) != 0) buffer[last++] = BYTE2(i);
    /* always */       buffer[last++] = BYTE3(i);
    /* always */       buffer[last++] = BYTE4(i);
}

开发者ID:clerkma，项目名称:ptex-ng，代码行数:7，代码来源:ptexenc.c

示例3: Data_Send_VOTAGE

void Data_Send_VOTAGE(void)
{
	u8 _cnt=0;
	float adc;
	adc = (ADC_ConvertedValue / 4096.0) * 3.3 * 11.0;
	ADC_ConvertedValue = (u32)(adc * 100);
	data_to_send[_cnt++]=0xAA;
	data_to_send[_cnt++]=0xAA;
	data_to_send[_cnt++]=0x05;
	data_to_send[_cnt++]=0;
	data_to_send[_cnt++]=BYTE1(ADC_ConvertedValue);
	data_to_send[_cnt++]=BYTE0(ADC_ConvertedValue);
	data_to_send[_cnt++]=BYTE1(ADC_ConvertedValue);
	data_to_send[_cnt++]=BYTE0(ADC_ConvertedValue);
	data_to_send[_cnt++]=BYTE1(ADC_ConvertedValue);
	data_to_send[_cnt++]=BYTE0(ADC_ConvertedValue);
	data_to_send[_cnt++]=BYTE1(ADC_ConvertedValue);
	data_to_send[_cnt++]=BYTE0(ADC_ConvertedValue);
	
	data_to_send[3] = _cnt-4;
	
	u8 sum = 0;
	for(u8 i=0;i<_cnt;i++)
		sum += data_to_send[i];
	
	data_to_send[_cnt++]=sum;
	
#ifdef DATA_TRANSFER_USE_USART
	Uart2_Put_Buf(data_to_send,_cnt);
#else
	NRF_TxPacket(data_to_send,_cnt);
#endif
}

开发者ID:guruebaran，项目名称:fly0513，代码行数:33，代码来源:Data_Transfer.c

示例4: Data_Send_MotoPWM

//■4：发送PWM值
void Data_Send_MotoPWM(void)
{
	u8 _cnt=0;
	u8 i;
	data_to_send[_cnt++]=0xAA;
	data_to_send[_cnt++]=0xAA;
	data_to_send[_cnt++]=0x06;
	data_to_send[_cnt++]=0;
	data_to_send[_cnt++]=BYTE1(Pwm_Para.motor_front_pwm);
	data_to_send[_cnt++]=BYTE0(Pwm_Para.motor_front_pwm);
	data_to_send[_cnt++]=BYTE1(Pwm_Para.motor_back_pwm);
	data_to_send[_cnt++]=BYTE0(Pwm_Para.motor_back_pwm);
	data_to_send[_cnt++]=BYTE1(Pwm_Para.motor_left_pwm);
	data_to_send[_cnt++]=BYTE0(Pwm_Para.motor_left_pwm);
	data_to_send[_cnt++]=BYTE1(Pwm_Para.motor_right_pwm);
	data_to_send[_cnt++]=BYTE0(Pwm_Para.motor_right_pwm);  //四个电机油门

	data_to_send[3] = _cnt-4;

	u8 sum = 0;
	for(i=0;i<_cnt;i++)
		sum += data_to_send[i];

	data_to_send[_cnt++]=sum;

	Uart0_Put_Buf(data_to_send,_cnt);
}

开发者ID:zcatao，项目名称:FourAxis，代码行数:28，代码来源:bluth.c

示例5: Send_Status

void ANO_DT::Send_Status(void)
{
	u8 _cnt=0;
	data_to_send[_cnt++]=0xAA;
	data_to_send[_cnt++]=0xAA;
	data_to_send[_cnt++]=0x01;
	data_to_send[_cnt++]=0;
	vs16 _temp;
	_temp = (int)(imu.angle.x*100);
	data_to_send[_cnt++]=BYTE1(_temp);
	data_to_send[_cnt++]=BYTE0(_temp);
	_temp = (int)(imu.angle.y*100);
	data_to_send[_cnt++]=BYTE1(_temp);
	data_to_send[_cnt++]=BYTE0(_temp);
	_temp = (int)(imu.angle.z*100);
	data_to_send[_cnt++]=BYTE1(_temp);
	data_to_send[_cnt++]=BYTE0(_temp);
	vs32 _temp2 = 0;//UltraAlt * 100;
	data_to_send[_cnt++]=BYTE3(_temp2);
	data_to_send[_cnt++]=BYTE2(_temp2);
	data_to_send[_cnt++]=BYTE1(_temp2);
	data_to_send[_cnt++]=BYTE0(_temp2);
	
	data_to_send[3] = _cnt-4;
	
	u8 sum = 0;
	for(u8 i=0;i<_cnt;i++)
		sum += data_to_send[i];
	data_to_send[_cnt++]=sum;
	
	Send_Data(data_to_send, _cnt);
}

开发者ID:yangshishu，项目名称:HexCopter，代码行数:32，代码来源:ANO_DT.cpp

示例6: Data_Send_MotoPWM

/* -------------发送PWM值---------------------------- */
void Data_Send_MotoPWM(void)
{
	uint8_t _cnt=0;
	data_to_send[_cnt++]=0xAA;
	data_to_send[_cnt++]=0xAA;
	data_to_send[_cnt++]=0x02;
//	data_to_send[_cnt++]=0x06;
	data_to_send[_cnt++]=0;
	data_to_send[_cnt++]=BYTE1(MOTOR4);          //X轴正向电机
	data_to_send[_cnt++]=BYTE0(MOTOR4);          
	data_to_send[_cnt++]=BYTE1(MOTOR3);          //X轴负向电机
	data_to_send[_cnt++]=BYTE0(MOTOR3);
	data_to_send[_cnt++]=BYTE1(MOTOR2);          //Y轴正向电机
	data_to_send[_cnt++]=BYTE0(MOTOR2);
	data_to_send[_cnt++]=BYTE1(MOTOR1);          //Y轴负向电机
	data_to_send[_cnt++]=BYTE0(MOTOR1);
//	data_to_send[_cnt++]=BYTE1(Moto_PWM_5);
//	data_to_send[_cnt++]=BYTE0(Moto_PWM_5);
//	data_to_send[_cnt++]=BYTE1(Moto_PWM_6);
//	data_to_send[_cnt++]=BYTE0(Moto_PWM_6);
//	data_to_send[_cnt++]=BYTE1(Moto_PWM_7);
//	data_to_send[_cnt++]=BYTE0(Moto_PWM_7);
//	data_to_send[_cnt++]=BYTE1(Moto_PWM_8);
//	data_to_send[_cnt++]=BYTE0(Moto_PWM_8);
	
	data_to_send[3] = _cnt-4;
	
	uint8_t sum = 0;
	for(uint8_t i=0;i<_cnt;i++)
		sum += data_to_send[i];
	
	data_to_send[_cnt++]=sum;
	
	HAL_UART_Transmit_DMA(&huart2, data_to_send, _cnt);;
}

开发者ID:ageofflight，项目名称:2015NUEDC，代码行数:36，代码来源:Data_Transfer.c

示例7: Data_Send_Voltage

void Data_Send_Voltage(T_RC_Voltage *data)
{
	rt_uint8_t _cnt=0;
	data_to_send[_cnt++]=0XAA;
	data_to_send[_cnt++]=0xAA;
	data_to_send[_cnt++]=0x05;//µçÑ¹¹¦ÄÜ×Ö
	data_to_send[_cnt++]=0;
	
	rt_uint16_t _temp;//µçÑ¹¿Ï¶¨ÎªÕý
	_temp = data->Voltage1*100;
	data_to_send[_cnt++]=BYTE1(_temp);
	data_to_send[_cnt++]=BYTE0(_temp);
	
	_temp = data->Voltage2*100;
	data_to_send[_cnt++]=BYTE1(_temp);
	data_to_send[_cnt++]=BYTE0(_temp);	
	
	_temp =  data->Voltage3*100;
	data_to_send[_cnt++]=BYTE1(_temp);
	data_to_send[_cnt++]=BYTE0(_temp);
	
	data_to_send[3] = _cnt-4;
	
	
	rt_uint8_t sum = 0;
	for(rt_uint8_t i=0;i<_cnt;i++)
		sum += data_to_send[i];
	data_to_send[_cnt++]=sum;
	
	NRF24L01_TxPacket(data_to_send);
	
}

开发者ID:trigrass2，项目名称:MircoFlyV0.7，代码行数:32，代码来源:transfer_app.c

示例8: ANO_DT_Send_Power

void ANO_DT_Send_Power(u16 votage, u16 current)
{
	u8 _cnt=0;
	u16 temp;
	
	data_to_send[_cnt++]=0xAA;
	data_to_send[_cnt++]=0xAA;
	data_to_send[_cnt++]=0x05;
	data_to_send[_cnt++]=0;
	
	temp = votage;
	data_to_send[_cnt++]=BYTE1(temp);
	data_to_send[_cnt++]=BYTE0(temp);
	temp = current;
	data_to_send[_cnt++]=BYTE1(temp);
	data_to_send[_cnt++]=BYTE0(temp);
	
	data_to_send[3] = _cnt-4;
	
	u8 sum = 0;
	for(u8 i=0;i<_cnt;i++)
		sum += data_to_send[i];
	
	data_to_send[_cnt++]=sum;
	
	ANO_DT_Send_Data(data_to_send, _cnt);
}

开发者ID:StefanJia，项目名称:test2，代码行数:27，代码来源:ANO_DT.c

示例9: ixp4xx_copy_from

/*
 * The IXP4xx expansion bus only allows 16-bit wide acceses
 * when attached to a 16-bit wide device (such as the 28F128J3A),
 * so we can't just memcpy_fromio().
 */
static void ixp4xx_copy_from(struct map_info *map, void *to,
                             unsigned long from, ssize_t len)
{
    u8 *dest = (u8 *) to;
    void __iomem *src = map->virt + from;

    if (len <= 0)
        return;

    if (from & 1) {
        *dest++ = BYTE1(flash_read16(src-1));
        src++;
        --len;
    }

    while (len >= 2) {
        u16 data = flash_read16(src);
        *dest++ = BYTE0(data);
        *dest++ = BYTE1(data);
        src += 2;
        len -= 2;
    }

    if (len > 0)
        *dest++ = BYTE0(flash_read16(src));
}

开发者ID:jerem，项目名称:hi35xx-buildroot，代码行数:31，代码来源:ixp4xx.c

示例10: ANO_DT_Send_Version

void ANO_DT_Send_Version(u8 hardware_type, u16 hardware_ver,u16 software_ver,u16 protocol_ver,u16 bootloader_ver)
{
	u8 _cnt=0;
	data_to_send[_cnt++]=0xAA;
	data_to_send[_cnt++]=0xAA;
	data_to_send[_cnt++]=0x00;
	data_to_send[_cnt++]=0;
	
	data_to_send[_cnt++]=hardware_type;
	data_to_send[_cnt++]=BYTE1(hardware_ver);
	data_to_send[_cnt++]=BYTE0(hardware_ver);
	data_to_send[_cnt++]=BYTE1(software_ver);
	data_to_send[_cnt++]=BYTE0(software_ver);
	data_to_send[_cnt++]=BYTE1(protocol_ver);
	data_to_send[_cnt++]=BYTE0(protocol_ver);
	data_to_send[_cnt++]=BYTE1(bootloader_ver);
	data_to_send[_cnt++]=BYTE0(bootloader_ver);
	
	data_to_send[3] = _cnt-4;
	
	u8 sum = 0;
	for(u8 i=0;i<_cnt;i++)
		sum += data_to_send[i];
	data_to_send[_cnt++]=sum;
	
	ANO_DT_Send_Data(data_to_send, _cnt);
}

开发者ID:StefanJia，项目名称:test2，代码行数:27，代码来源:ANO_DT.c

示例11: Data_Send_RCData

void Data_Send_RCData(void)
{
	u8 _cnt=0;
	data_to_send[_cnt++]=0xAA;
	data_to_send[_cnt++]=0xAA;
	data_to_send[_cnt++]=0x03;
	data_to_send[_cnt++]=0;
	data_to_send[_cnt++]=BYTE1(Rc_D.THROTTLE);
	data_to_send[_cnt++]=BYTE0(Rc_D.THROTTLE);
	data_to_send[_cnt++]=BYTE1(Rc_D.YAW);
	data_to_send[_cnt++]=BYTE0(Rc_D.YAW);
	data_to_send[_cnt++]=BYTE1(Rc_D.ROLL);
	data_to_send[_cnt++]=BYTE0(Rc_D.ROLL);
	data_to_send[_cnt++]=BYTE1(Rc_D.PITCH);
	data_to_send[_cnt++]=BYTE0(Rc_D.PITCH);

	
	data_to_send[3] = _cnt-4;
	
	u8 sum = 0;
	for(u8 i=0;i<_cnt;i++)
		sum += data_to_send[i];
	
	data_to_send[_cnt++]=sum;
	
#ifdef DATA_TRANSFER_USE_USART
	Uart2_Put_Buf(data_to_send,_cnt);
#else
	NRF_TxPacket(data_to_send,_cnt);
#endif
}

开发者ID:guruebaran，项目名称:fly0513，代码行数:31，代码来源:Data_Transfer.c

示例12: Data_Send_OFFSET

void Data_Send_OFFSET(void)
{
	u8 _cnt=0;
	data_to_send[_cnt++]=0xAA;
	data_to_send[_cnt++]=0xAA;
	data_to_send[_cnt++]=0x16;
	data_to_send[_cnt++]=0;
	vs16 _temp = AngleOffset_Rol*1000;
	data_to_send[_cnt++]=BYTE1(_temp);
	data_to_send[_cnt++]=BYTE0(_temp);
	_temp = AngleOffset_Pit*1000;
	data_to_send[_cnt++]=BYTE1(_temp);
	data_to_send[_cnt++]=BYTE0(_temp);
	
	data_to_send[3] = _cnt-4;
	
	u8 sum = 0;
	for(u8 i=0;i<_cnt;i++)
		sum += data_to_send[i];
	
	data_to_send[_cnt++]=sum;
	
#ifdef DATA_TRANSFER_USE_USART
	Uart1_Put_Buf(data_to_send,_cnt);
#else
	NRF_TxPacket(data_to_send,_cnt);
#endif
}

开发者ID:kenziD，项目名称:Other-People-Program，代码行数:28，代码来源:Data_Transfer.c

示例13: Data_Send_MotoPWM

void Data_Send_MotoPWM(void)
{
	vs16 a,b,c,d;
	a=Moto_PWM_1-1000;
	b=Moto_PWM_2-1000;
	c=Moto_PWM_3-1000;
	d=Moto_PWM_4-1000;
	u8 _cnt=0;
	data_to_send[_cnt++]=0xAA;
	data_to_send[_cnt++]=0xAA;
	data_to_send[_cnt++]=0x06;
	data_to_send[_cnt++]=0;
	data_to_send[_cnt++]=BYTE1(a);//((Moto_PWM_1-1000));
	data_to_send[_cnt++]=BYTE0(a);//((Moto_PWM_1-1000));
	data_to_send[_cnt++]=BYTE1(b);//((Moto_PWM_2-1000));
	data_to_send[_cnt++]=BYTE0(b);//((Moto_PWM_2-1000));
	data_to_send[_cnt++]=BYTE1(c);//((Moto_PWM_3-1000));
	data_to_send[_cnt++]=BYTE0(c);//((Moto_PWM_3-1000));
	data_to_send[_cnt++]=BYTE1(d);//((Moto_PWM_4-1000));
	data_to_send[_cnt++]=BYTE0(d);//((Moto_PWM_4-1000));
	
	data_to_send[3] = _cnt-4;
	
	u8 sum = 0;
	for(u8 i=0;i<_cnt;i++)
		sum += data_to_send[i];
	
	data_to_send[_cnt++]=sum;
	
#ifdef DATA_TRANSFER_USE_USART
	Uart2_Put_Buf(data_to_send,_cnt);
#else
	NRF_TxPacket(data_to_send,_cnt);
#endif
}

开发者ID:guruebaran，项目名称:fly0513，代码行数:35，代码来源:Data_Transfer.c

示例14: vtuDownsampleImageRGBA

uint32_t * vtuDownsampleImageRGBA(const uint32_t *tex)
{
	uint32_t *smallTex = (uint32_t *)malloc(c.pageDimension * c.pageDimension);
	assert(smallTex);

	for (uint16_t x = 0; x < c.pageDimension / 2; x++)
	{
		for (uint16_t y = 0; y < c.pageDimension / 2; y++)
		{
#ifdef COLOR_CODE_MIPPED_PHYSTEX
			smallTex[y * (c.pageDimension / 2) + x] = (255 << 24) + (0 << 16) + (0 << 8) + 255;
#else
			uint32_t pix1 = tex[(y*2) * c.pageDimension + (x*2)];
			uint32_t pix2 = tex[(y*2+1) * c.pageDimension + (x*2)];
			uint32_t pix3 = tex[(y*2) * c.pageDimension + (x*2+1)];
			uint32_t pix4 = tex[(y*2+1) * c.pageDimension + (x*2+1)];

			uint32_t b1 = BYTE1(pix1) + BYTE1(pix2) + BYTE1(pix3) + BYTE1(pix4);
			uint32_t b2 = BYTE2(pix1) + BYTE2(pix2) + BYTE2(pix3) + BYTE2(pix4);
			uint32_t b3 = BYTE3(pix1) + BYTE3(pix2) + BYTE3(pix3) + BYTE3(pix4);
			uint32_t b4 = BYTE4(pix1) + BYTE4(pix2) + BYTE4(pix3) + BYTE4(pix4);


			smallTex[y * (c.pageDimension / 2) + x] =  ((b4 / 4) << 24) + ((b3 / 4) << 16) + ((b2 / 4) << 8) + (b1 / 4); // ARGB
#endif
		}
	}

	return smallTex;
}

开发者ID:caomw，项目名称:benthicQT，代码行数:30，代码来源:LibVT_Utilities.cpp

示例15: SendRcvControlQuantity

bool Communication::SendRcvControlQuantity(float aux1,float aux2,float aux3,float aux4,float aux5,float aux6)
{
	u8 _cnt=0;
	u8 data_to_send[30];
	vs16 _temp;
	
	data_to_send[_cnt++]=0xAA;
	data_to_send[_cnt++]=0xAA;
	data_to_send[_cnt++]=0x03;
	data_to_send[_cnt++]=0;
	
	data_to_send[_cnt++]=BYTE1(mRcvTargetThr);
	data_to_send[_cnt++]=BYTE0(mRcvTargetThr);
	
	data_to_send[_cnt++]=BYTE1(mRcvTargetYaw);
	data_to_send[_cnt++]=BYTE0(mRcvTargetYaw);
	
	data_to_send[_cnt++]=BYTE1(mRcvTargetRoll);
	data_to_send[_cnt++]=BYTE0(mRcvTargetRoll);
	
	data_to_send[_cnt++]=BYTE1(mRcvTargetPitch);
	data_to_send[_cnt++]=BYTE0(mRcvTargetPitch);
	
	
	_temp = (int)(aux1*100);
	data_to_send[_cnt++]=BYTE1(_temp);
	data_to_send[_cnt++]=BYTE0(_temp);
	
	_temp = (int)(aux2*100);
	data_to_send[_cnt++]=BYTE1(_temp);
	data_to_send[_cnt++]=BYTE0(_temp);
	
	_temp = (int)(aux3*100);
	data_to_send[_cnt++]=BYTE1(_temp);
	data_to_send[_cnt++]=BYTE0(_temp);
	
	_temp = (int)(aux4*100);
	data_to_send[_cnt++]=BYTE1(_temp);
	data_to_send[_cnt++]=BYTE0(_temp);
	
	_temp = (int)(aux5*100);
	data_to_send[_cnt++]=BYTE1(_temp);
	data_to_send[_cnt++]=BYTE0(_temp);
	
	_temp = (int)(aux6*100);
	data_to_send[_cnt++]=BYTE1(_temp);
	data_to_send[_cnt++]=BYTE0(_temp);
	


	data_to_send[3] = _cnt-4;
	u8 sum = 0;
	for(u8 i=0;i<_cnt;i++)
		sum += data_to_send[i];
	data_to_send[_cnt++] = sum;
	
	usart.SendData(data_to_send, _cnt);
	return true;
}

开发者ID:lissettecarlr，项目名称:Quadcopter，代码行数:59，代码来源:Communication.cpp

示例16: Data_Send_PID4

//¡ö8£º·¢ËÍPID4
void Data_Send_PID4(void)
{
    u8 _cnt = 0;
    data_to_send[_cnt++] = 0xAA;
    data_to_send[_cnt++] = 0xAA;
    data_to_send[_cnt++] = 0x13;
    data_to_send[_cnt++] = 0;
    vs16 _temp;
    _temp = (vs16)(PID_PID_5.P * PID_PID_5_P_MULTIPLYING); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_5.I * PID_PID_5_I_MULTIPLYING); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_5.D * PID_PID_5_D_MULTIPLYING); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_6.P * PID_PID_6_P_MULTIPLYING); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_6.I * PID_PID_6_I_MULTIPLYING); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_6.D * PID_PID_6_D_MULTIPLYING); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_7.P * PID_PID_7_P_MULTIPLYING); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_7.I * PID_PID_7_I_MULTIPLYING); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_7.D * PID_PID_7_D_MULTIPLYING); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    data_to_send[3] = _cnt - 4;
    u8 sum = 0;
    for (u8 i = 0; i < _cnt; i++)
        sum += data_to_send[i];
    data_to_send[_cnt++] = sum;
#ifdef DATA_TRANSFER_USE_USART
    Sys_sPrintf(Printf_USART, data_to_send, _cnt);
#else
    NRF_TxPacket(data_to_send, _cnt);
#endif
}

开发者ID:jasongwq，项目名称:FLY，代码行数:29，代码来源:data_transfer.c

示例17: Data_Send_PID3

//¡ö8£º·¢ËÍPID3
void Data_Send_PID3(void)
{
    u8 _cnt = 0;
    data_to_send[_cnt++] = 0xAA;
    data_to_send[_cnt++] = 0xAA;
    data_to_send[_cnt++] = 0x12;
    data_to_send[_cnt++] = 0;
    vs16 _temp;
    _temp = (vs16)(PID_PID_2.P * PID_PID_2_P_MULTIPLYING); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_2.I * PID_PID_2_I_MULTIPLYING); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_2.D * PID_PID_2_D_MULTIPLYING); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_3.P * PID_PID_3_P_MULTIPLYING); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_3.I * PID_PID_3_I_MULTIPLYING); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_3.D * PID_PID_3_D_MULTIPLYING); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_4.P * PID_PID_4_P_MULTIPLYING); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_4.I * PID_PID_4_I_MULTIPLYING); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_4.D * PID_PID_4_D_MULTIPLYING); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    data_to_send[3] = _cnt - 4;
    u8 sum = 0;
    for (u8 i = 0; i < _cnt; i++)
        sum += data_to_send[i];
    data_to_send[_cnt++] = sum;
#ifdef DATA_TRANSFER_USE_USART
    Sys_sPrintf(Printf_USART, data_to_send, _cnt);
#else
    NRF_TxPacket(data_to_send, _cnt);
#endif
}

开发者ID:jasongwq，项目名称:FLY，代码行数:29，代码来源:data_transfer.c

示例18: Data_Send_PID2

void Data_Send_PID2(void)
{
    u8 _cnt = 0;
    data_to_send[_cnt++] = 0xAA;
    data_to_send[_cnt++] = 0xAA;
    data_to_send[_cnt++] = 0x11;
    data_to_send[_cnt++] = 0;
    vs16 _temp;
    _temp = (vs16)(PID_ALT.P   * PID_ALT_P_MULTIPLYING  ); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_ALT.I   * PID_ALT_I_MULTIPLYING  ); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_ALT.D   * PID_ALT_D_MULTIPLYING  ); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_POS.P   * PID_POS_P_MULTIPLYING  ); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_POS.I   * PID_POS_I_MULTIPLYING  ); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_POS.D   * PID_POS_D_MULTIPLYING  ); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_1.P * PID_PID_1_P_MULTIPLYING); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_1.I * PID_PID_1_I_MULTIPLYING); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_1.D * PID_PID_1_D_MULTIPLYING); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    data_to_send[3] = _cnt - 4;
    u8 sum = 0;
    for (u8 i = 0; i < _cnt; i++)
        sum += data_to_send[i];
    data_to_send[_cnt++] = sum;
#ifdef DATA_TRANSFER_USE_USART
    Sys_sPrintf(Printf_USART, data_to_send, _cnt);
#else
    NRF_TxPacket(data_to_send, _cnt);
#endif
}

开发者ID:jasongwq，项目名称:FLY，代码行数:28，代码来源:data_transfer.c

示例19: Data_Send_PID1

void Data_Send_PID1(void)
{
    u8 _cnt = 0;
    data_to_send[_cnt++] = 0xAA;
    data_to_send[_cnt++] = 0xAA;
    data_to_send[_cnt++] = 0x10;
    data_to_send[_cnt++] = 0;
    vs16 _temp;
    _temp = PID_ROL.P * PID_ROL_P_MULTIPLYING; data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = PID_ROL.I * PID_ROL_I_MULTIPLYING; data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = PID_ROL.D * PID_ROL_D_MULTIPLYING; data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = PID_PIT.P * PID_PIT_P_MULTIPLYING; data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = PID_PIT.I * PID_PIT_I_MULTIPLYING; data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = PID_PIT.D * PID_PIT_D_MULTIPLYING; data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = PID_YAW.P * PID_YAW_P_MULTIPLYING; data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = PID_YAW.I * PID_YAW_I_MULTIPLYING; data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = PID_YAW.D * PID_YAW_D_MULTIPLYING; data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    data_to_send[3] = _cnt - 4;
    u8 sum = 0;
    for (u8 i = 0; i < _cnt; i++)
        sum += data_to_send[i];
    data_to_send[_cnt++] = sum;
#ifdef DATA_TRANSFER_USE_USART
    Sys_sPrintf(Printf_USART, data_to_send, _cnt);
#else
    NRF_TxPacket(data_to_send, _cnt);
#endif
}

开发者ID:jasongwq，项目名称:FLY，代码行数:28，代码来源:data_transfer.c

示例20: Data_Send_PID5

void Data_Send_PID5(void)
{
    u8 _cnt = 0;
    data_to_send[_cnt++] = 0xAA;
    data_to_send[_cnt++] = 0xAA;
    data_to_send[_cnt++] = 0x14;
    data_to_send[_cnt++] = 0;
    vs16 _temp;
    _temp = (vs16)(PID_PID_8.P  * PID_PID_8_P_MULTIPLYING ); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_8.I  * PID_PID_8_I_MULTIPLYING ); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_8.D  * PID_PID_8_D_MULTIPLYING ); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_9.P  * PID_PID_9_P_MULTIPLYING ); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_9.I  * PID_PID_9_I_MULTIPLYING ); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_9.D  * PID_PID_9_D_MULTIPLYING ); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_10.P * PID_PID_10_P_MULTIPLYING); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_10.I * PID_PID_10_I_MULTIPLYING); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    _temp = (vs16)(PID_PID_10.D * PID_PID_10_D_MULTIPLYING); data_to_send[_cnt++] = BYTE1(_temp); data_to_send[_cnt++] = BYTE0(_temp);
    data_to_send[3] = _cnt - 4;
    u8 sum = 0;
    for (u8 i = 0; i < _cnt; i++)
        sum += data_to_send[i];
    data_to_send[_cnt++] = sum;
#ifdef DATA_TRANSFER_USE_USART
    Sys_sPrintf(Printf_USART, data_to_send, _cnt);
#else
    NRF_TxPacket(data_to_send, _cnt);
#endif
}

开发者ID:jasongwq，项目名称:FLY，代码行数:28，代码来源:data_transfer.c

注：本文中的BYTE1函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ BYTEARRAY函数代码示例发布时间：2022-05-30

C++ BYTE0函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18334|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9702|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8193|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8560|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8471|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9412|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8443|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7875|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8427|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7403|2022-11-06

客服电话

电子邮件

C++ BYTE1函数代码示例

示例1:

示例2: write_multibyte

示例3: Data_Send_VOTAGE

示例4: Data_Send_MotoPWM

示例5: Send_Status

示例6: Data_Send_MotoPWM

示例7: Data_Send_Voltage

示例8: ANO_DT_Send_Power

示例9: ixp4xx_copy_from

示例10: ANO_DT_Send_Version

示例11: Data_Send_RCData

示例12: Data_Send_OFFSET

示例13: Data_Send_MotoPWM

示例14: vtuDownsampleImageRGBA

示例15: SendRcvControlQuantity

示例16: Data_Send_PID4

示例17: Data_Send_PID3

示例18: Data_Send_PID2

示例19: Data_Send_PID1

示例20: Data_Send_PID5

请发表评论

全部评论

上一篇：

下一篇：

theindianappguy/machine_learning_flutter

samaxes/minify-maven-plugin: Combine and

挨打的读音是什么？是āi dǎ还是ái dǎ？

微信小程序公告滚动通知 - 子钦加油

nacika-ins/nanachibot: nanachibot is Rus

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053