C++ BaseWindingForPlane函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中BaseWindingForPlane函数的典型用法代码示例。如果您正苦于以下问题：C++ BaseWindingForPlane函数的具体用法？C++ BaseWindingForPlane怎么用？C++ BaseWindingForPlane使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了BaseWindingForPlane函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: MakeBrushWindings

/*
   ================
   MakeBrushWindings

   makes basewindigs for sides and mins / maxs for the brush
   ================
 */
qboolean MakeBrushWindings( mapbrush_t *ob ){
	int i, j;
	winding_t   *w;
	side_t      *side;
	plane_t     *plane;

	ClearBounds( ob->mins, ob->maxs );

	for ( i = 0 ; i < ob->numsides ; i++ )
	{
		plane = &mapplanes[ob->original_sides[i].planenum];
		w = BaseWindingForPlane( plane->normal, plane->dist );
		for ( j = 0 ; j < ob->numsides && w; j++ )
		{
			if ( i == j ) {
				continue;
			}
			if ( ob->original_sides[j].bevel ) {
				continue;
			}
			plane = &mapplanes[ob->original_sides[j].planenum ^ 1];
			ChopWindingInPlace( &w, plane->normal, plane->dist, 0 ); //CLIP_EPSILON);
		}

		side = &ob->original_sides[i];
		side->winding = w;
		if ( w ) {
			side->visible = true;
			for ( j = 0 ; j < w->numpoints ; j++ )
				AddPointToBounds( w->p[j], ob->mins, ob->maxs );
		}
	}

	for ( i = 0 ; i < 3 ; i++ )
	{
		if ( ob->mins[0] < -4096 || ob->maxs[0] > 4096 ) {
			Sys_Printf( "entity %i, brush %i: bounds out of range\n", ob->entitynum, ob->brushnum );
		}
		if ( ob->mins[0] > 4096 || ob->maxs[0] < -4096 ) {
			Sys_Printf( "entity %i, brush %i: no visible sides on brush\n", ob->entitynum, ob->brushnum );
		}
	}

	return true;
}

开发者ID:Barbatos，项目名称:GtkRadiant，代码行数:52，代码来源:map.c

示例2: TestExpandBrushes

/*
================
TestExpandBrushes

Expands all the brush planes and saves a new map out
================
*/
void TestExpandBrushes (void)
{
	FILE	*f;
	side_t	*s;
	int		i, j, bn;
	winding_t	*w;
	char	*name = "expanded.map";
	mapbrush_t	*brush;
	vec_t	dist;

	printf ("writing %s\n", name);
	f = fopen (name, "wb");
	if (!f)
		Error ("Can't write %s\b", name);

	fprintf (f, "{\n\"classname\" \"worldspawn\"\n");

	for (bn=0 ; bn<nummapbrushes ; bn++)
	{
		brush = &mapbrushes[bn];
		fprintf (f, "{\n");
		for (i=0 ; i<brush->numsides ; i++)
		{
			s = brush->original_sides + i;
			dist = mapplanes[s->planenum].dist;
			for (j=0 ; j<3 ; j++)
				dist += fabs( 16 * mapplanes[s->planenum].normal[j] );

			w = BaseWindingForPlane (mapplanes[s->planenum].normal, dist);

			fprintf (f,"( %i %i %i ) ", (int)w->p[0][0], (int)w->p[0][1], (int)w->p[0][2]);
			fprintf (f,"( %i %i %i ) ", (int)w->p[1][0], (int)w->p[1][1], (int)w->p[1][2]);
			fprintf (f,"( %i %i %i ) ", (int)w->p[2][0], (int)w->p[2][1], (int)w->p[2][2]);

			fprintf (f, "%s 0 0 0 1 1\n", texinfo[s->texinfo].texture);
			FreeWinding (w);
		}
		fprintf (f, "}\n");
	}
	fprintf (f, "}\n");

	fclose (f);

	Error ("can't proceed after expanding brushes");
}

开发者ID:MyLittleRobo，项目名称:Quake-2-Tools，代码行数:52，代码来源:map.c

示例3: CM_ValidateFacet

/*
==================
CM_ValidateFacet

If the facet isn't bounded by its borders, we screwed up.
==================
*/
static qboolean CM_ValidateFacet( facet_t *facet ) {
	float		plane[4];
	int			j;
	winding_t	*w;
	vec3_t		bounds[2];

	if ( facet->surfacePlane == -1 ) {
		return qfalse;
	}

	Vector4Copy( planes[ facet->surfacePlane ].plane, plane );
	w = BaseWindingForPlane( plane,  plane[3] );
	for ( j = 0 ; j < facet->numBorders && w ; j++ ) {
		if ( facet->borderPlanes[j] == -1 ) {
			return qfalse;
		}
		Vector4Copy( planes[ facet->borderPlanes[j] ].plane, plane );
		if ( !facet->borderInward[j] ) {
			VectorSubtract( vec3_origin, plane, plane );
			plane[3] = -plane[3];
		}
		ChopWindingInPlace( &w, plane, plane[3], 0.1f );
	}

	if ( !w ) {
		return qfalse;		// winding was completely chopped away
	}

	// see if the facet is unreasonably large
	WindingBounds( w, bounds[0], bounds[1] );
	FreeWinding( w );
	
	for ( j = 0 ; j < 3 ; j++ ) {
		if ( bounds[1][j] - bounds[0][j] > MAX_MAP_BOUNDS ) {
			return qfalse;		// we must be missing a plane
		}
		if ( bounds[0][j] >= MAX_MAP_BOUNDS ) {
			return qfalse;
		}
		if ( bounds[1][j] <= -MAX_MAP_BOUNDS ) {
			return qfalse;
		}
	}
	return qtrue;		// winding is fine
}

开发者ID:entdark，项目名称:q3mme，代码行数:52，代码来源:cm_patch.c

示例4: MakeNodePortal

/*
==================
MakeNodePortal

create the new portal by taking the full plane winding for the cutting plane
and clipping it by all of the planes from the other portals.

Each portal tracks the node that created it, so unused nodes
can be removed later.
==================
*/
void MakeNodePortal (node_t *node)
{
	portal_t	*new_portal, *p;
	dplane_t	*plane;
	dplane_t	clipplane;
	winding_t	*w;
	int			side;

	plane = &dplanes[node->planenum];
	w = BaseWindingForPlane (plane);

	new_portal = AllocPortal ();
	new_portal->plane = *plane;
	new_portal->onnode = node;

	side = 0;	// shut up compiler warning
	for (p = node->portals ; p ; p = p->next[side])	
	{
		clipplane = p->plane;
		if (p->nodes[0] == node)
			side = 0;
		else if (p->nodes[1] == node)
		{
			clipplane.dist = -clipplane.dist;
			VectorSubtract (vec3_origin, clipplane.normal, clipplane.normal);
			side = 1;
		}
		else
			Error ("MakeNodePortal: mislinked portal");

		w = ClipWinding (w, &clipplane, true);
		if (!w)
		{
			printf ("WARNING: MakeNodePortal:new portal was clipped away from [email protected](%.0f,%.0f,%.0f)-(%.0f,%.0f,%.0f)\n",
					node->mins[0], node->mins[1], node->mins[2], 
					node->maxs[0], node->maxs[1], node->maxs[2]);
			FreePortal (new_portal);
			return;
		}
	}

	new_portal->winding = w;	
	AddPortalToNodes (new_portal, node->children[0], node->children[1]);
}

开发者ID:DeadlyGamer，项目名称:cs16nd，代码行数:55，代码来源:solidbsp.c

示例5: MakeBrushWindings

/**
 * @brief makes basewindings for sides and mins / maxs for the brush
 */
static bool MakeBrushWindings (mapbrush_t* brush)
{
	int i, j;

	brush->mbBox.setNegativeVolume();

	for (i = 0; i < brush->numsides; i++) {
		const plane_t* plane = &mapplanes[brush->original_sides[i].planenum];
		winding_t* w = BaseWindingForPlane(plane->normal, plane->dist);
		for (j = 0; j < brush->numsides && w; j++) {
			if (i == j)
				continue;
			/* back side clipaway */
			if (brush->original_sides[j].planenum == (brush->original_sides[j].planenum ^ 1))
				continue;
			if (brush->original_sides[j].bevel)
				continue;
			plane = &mapplanes[brush->original_sides[j].planenum ^ 1];
			ChopWindingInPlace(&w, plane->normal, plane->dist, 0); /*CLIP_EPSILON); */
		}

		side_t* side = &brush->original_sides[i];
		side->winding = w;
		if (w) {
			side->visible = true;
			for (j = 0; j < w->numpoints; j++)
				brush->mbBox.add(w->p[j]);
		}
	}

	for (i = 0; i < 3; i++) {
		if (brush->mbBox.mins[i] < -MAX_WORLD_WIDTH || brush->mbBox.maxs[i] > MAX_WORLD_WIDTH)
			Com_Printf("entity %i, brush %i: bounds out of world range (%f:%f)\n",
				brush->entitynum, brush->brushnum, brush->mbBox.mins[i], brush->mbBox.maxs[i]);
		if (brush->mbBox.mins[i] > MAX_WORLD_WIDTH || brush->mbBox.maxs[i] < -MAX_WORLD_WIDTH) {
			Com_Printf("entity %i, brush %i: no visible sides on brush\n", brush->entitynum, brush->brushnum);
			VectorClear(brush->mbBox.mins);
			VectorClear(brush->mbBox.maxs);
		}
	}

	return true;
}

开发者ID:nicogiraldi，项目名称:ufoai，代码行数:46，代码来源:map.cpp

示例6: BSPBrushWindings

//===========================================================================
//
// Parameter:				-
// Returns:					-
// Changes Globals:		-
//===========================================================================
void BSPBrushWindings(bspbrush_t *brush)
{
	int i, j;
	winding_t *w;
	plane_t *plane;

	for (i = 0; i < brush->numsides; i++)
	{
		plane = &mapplanes[brush->sides[i].planenum];
		w = BaseWindingForPlane(plane->normal, plane->dist);
		for (j = 0; j < brush->numsides && w; j++)
		{
			if (i == j) continue;
			plane = &mapplanes[brush->sides[j].planenum^1];
			ChopWindingInPlace(&w, plane->normal, plane->dist, 0); //CLIP_EPSILON);
		} //end for
		brush->sides[i].winding = w;
	} //end for
} //end of the function BSPBrushWindings

开发者ID:Cpasjuste，项目名称:quake3_pandora_gles，代码行数:25，代码来源:csg.c

示例7: MakeBrushWindings

/*
 * MakeBrushWindings
 *
 * Makes basewindigs for sides and mins / maxs for the brush
 */
static boolean_t MakeBrushWindings(map_brush_t * ob) {
	int i, j;
	side_t *side;

	ClearBounds(ob->mins, ob->maxs);

	for (i = 0; i < ob->num_sides; i++) {
		const map_plane_t *plane = &map_planes[ob->original_sides[i].plane_num];
		winding_t *w = BaseWindingForPlane(plane->normal, plane->dist);
		for (j = 0; j < ob->num_sides && w; j++) {
			if (i == j)
				continue;
			// back side clipaway
			if (ob->original_sides[j].plane_num
					== (ob->original_sides[j].plane_num ^ 1))
				continue;
			if (ob->original_sides[j].bevel)
				continue;
			plane = &map_planes[ob->original_sides[j].plane_num ^ 1];
			ChopWindingInPlace(&w, plane->normal, plane->dist, 0); //CLIP_EPSILON);
		}

		side = &ob->original_sides[i];
		side->winding = w;
		if (w) {
			side->visible = true;
			for (j = 0; j < w->numpoints; j++)
				AddPointToBounds(w->p[j], ob->mins, ob->maxs);
		}
	}

	for (i = 0; i < 3; i++) {
		if (ob->mins[0] < -MAX_WORLD_WIDTH || ob->maxs[0] > MAX_WORLD_WIDTH)
			Com_Verbose("entity %i, brush %i: bounds out of range\n",
					ob->entity_num, ob->brush_num);
		if (ob->mins[0] > MAX_WORLD_WIDTH || ob->maxs[0] < -MAX_WORLD_WIDTH)
			Com_Verbose("entity %i, brush %i: no visible sides on brush\n",
					ob->entity_num, ob->brush_num);
	}

	return true;
}

开发者ID:darkshade9，项目名称:aq2w，代码行数:47，代码来源:map.c

示例8: BaseWindingForPlane

//===========================================================================
//
// Parameter:				-
// Returns:					-
// Changes Globals:		-
//===========================================================================
winding_t *AAS_SplitWinding( tmp_area_t *tmparea, int planenum ) {
	tmp_face_t *face;
	plane_t *plane;
	int side;
	winding_t *splitwinding;

	//
	plane = &mapplanes[planenum];
	//create a split winding, first base winding for plane
	splitwinding = BaseWindingForPlane( plane->normal, plane->dist );
	//chop with all the faces of the area
	for ( face = tmparea->tmpfaces; face && splitwinding; face = face->next[side] )
	{
		//side of the face the original area was on
		side = face->frontarea != tmparea;
		plane = &mapplanes[face->planenum ^ side];
		ChopWindingInPlace( &splitwinding, plane->normal, plane->dist, 0 ); // PLANESIDE_EPSILON);
	} //end for
	return splitwinding;
} //end of the function AAS_SplitWinding

开发者ID:AdrienJaguenet，项目名称:Enemy-Territory，代码行数:26，代码来源:aas_gsubdiv.c

示例9: WriteBSPBrushMap

void WriteBSPBrushMap( char *name, brush_t *list ){
	FILE        *f;
	side_t      *s;
	int i;
	winding_t   *w;


	/* note it */
	Sys_Printf( "Writing %s\n", name );

	/* open the map file */
	f = fopen( name, "wb" );
	if ( f == NULL ) {
		Error( "Can't write %s\b", name );
	}

	fprintf( f, "{\n\"classname\" \"worldspawn\"\n" );

	for ( ; list ; list = list->next )
	{
		fprintf( f, "{\n" );
		for ( i = 0,s = list->sides ; i < list->numsides ; i++,s++ )
		{
			// TODO: See if we can use a smaller winding to prevent resolution loss.
			// Is WriteBSPBrushMap() used only to decompile maps?
			w = BaseWindingForPlane( mapplanes[s->planenum].normal, mapplanes[s->planenum].dist );

			fprintf( f,"( %i %i %i ) ", (int)w->p[0][0], (int)w->p[0][1], (int)w->p[0][2] );
			fprintf( f,"( %i %i %i ) ", (int)w->p[1][0], (int)w->p[1][1], (int)w->p[1][2] );
			fprintf( f,"( %i %i %i ) ", (int)w->p[2][0], (int)w->p[2][1], (int)w->p[2][2] );

			fprintf( f, "notexture 0 0 0 1 1\n" );
			FreeWinding( w );
		}
		fprintf( f, "}\n" );
	}
	fprintf( f, "}\n" );

	fclose( f );

}

开发者ID:xonotic，项目名称:netradient，代码行数:41，代码来源:brush.c

示例10: CreateBrushWindings

/*
==================
CreateBrushWindings

makes basewindigs for sides and mins / maxs for the brush
returns false if the brush doesn't enclose a valid volume
==================
*/
qboolean CreateBrushWindings(bspBrush_t * brush)
{
	int             i, j;
	winding_t      *w;
	side_t         *side;
	plane_t        *plane;

	for(i = 0; i < brush->numsides; i++)
	{
		side = &brush->sides[i];
		// don't create a winding for a bevel
		if(side->bevel)
		{
			continue;
		}
		plane = &mapPlanes[side->planenum];
		w = BaseWindingForPlane(plane->normal, plane->dist);
		for(j = 0; j < brush->numsides && w; j++)
		{
			if(i == j)
				continue;
			if(brush->sides[j].planenum == (brush->sides[i].planenum ^ 1))
				continue;		// back side clipaway
			if(brush->sides[j].bevel)
				continue;
			if(brush->sides[j].backSide)
				continue;
			plane = &mapPlanes[brush->sides[j].planenum ^ 1];
			ChopWindingInPlace(&w, plane->normal, plane->dist, 0);	//CLIP_EPSILON);
		}
		// free any existing winding
		if(side->winding)
		{
			FreeWinding(side->winding);
		}
		side->winding = w;
	}

	return BoundBrush(brush);
}

开发者ID:otty，项目名称:cake3，代码行数:48，代码来源:brush.c

示例11: WriteBSPBrushMap

void WriteBSPBrushMap( char *name, brush_t *list )
{
    FILE		*f;
    side_t		*s;
    int			i;
    winding_t	*w;


    /* note it */
    Sys_Printf( "writing %s\n", name );

    /* open the map file */
    f = fopen( name, "wb" );
    if( f == NULL )
        Error( "Can't write %s\b", name );

    fprintf (f, "{\n\"classname\" \"worldspawn\"\n");

    for ( ; list ; list=list->next )
    {
        fprintf (f, "{\n");
        for (i=0,s=list->sides ; i<list->numsides ; i++,s++)
        {
            w = BaseWindingForPlane (mapplanes[s->planenum].normal, mapplanes[s->planenum].dist);
            fprintf (f,"( %i %i %i ) ", (int)w->p[0][0], (int)w->p[0][1], (int)w->p[0][2]);
            fprintf (f,"( %i %i %i ) ", (int)w->p[1][0], (int)w->p[1][1], (int)w->p[1][2]);
            fprintf (f,"( %i %i %i ) ", (int)w->p[2][0], (int)w->p[2][1], (int)w->p[2][2]);
            if ( s->shaderInfo == NULL )
                fprintf (f, "notexture 0 0 0 1 1 0 0 0\n" );
            else
                fprintf (f, "%s %i %i 0 1 1 0 0 0\n", s->shaderInfo->shader + 9, s->shaderInfo->shaderWidth, s->shaderInfo->shaderHeight );
            FreeWinding (w);
        }
        fprintf (f, "}\n");
    }
    fprintf (f, "}\n");

    fclose (f);

}

开发者ID:paulvortex，项目名称:BloodMap，代码行数:40，代码来源:brush.c

示例12: SplitBrush

void SplitBrush( brush_t *brush, int planenum, brush_t **front, brush_t **back ){
	brush_t     *b[2];
	int i, j;
	winding_t   *w, *cw[2], *midwinding;
	plane_t     *plane, *plane2;
	side_t      *s, *cs;
	float d, d_front, d_back;


	*front = NULL;
	*back = NULL;
	plane = &mapplanes[planenum];

	// check all points
	d_front = d_back = 0;
	for ( i = 0 ; i < brush->numsides ; i++ )
	{
		w = brush->sides[i].winding;
		if ( !w ) {
			continue;
		}
		for ( j = 0 ; j < w->numpoints ; j++ )
		{
			d = DotProduct( w->p[j], plane->normal ) - plane->dist;
			if ( d > 0 && d > d_front ) {
				d_front = d;
			}
			if ( d < 0 && d < d_back ) {
				d_back = d;
			}
		}
	}

	if ( d_front < 0.1 ) { // PLANESIDE_EPSILON)
		// only on back
		*back = CopyBrush( brush );
		return;
	}

	if ( d_back > -0.1 ) { // PLANESIDE_EPSILON)
		// only on front
		*front = CopyBrush( brush );
		return;
	}

	// create a new winding from the split plane
	w = BaseWindingForPlane( plane->normal, plane->dist );
	for ( i = 0 ; i < brush->numsides && w ; i++ )
	{
		plane2 = &mapplanes[brush->sides[i].planenum ^ 1];
		ChopWindingInPlace( &w, plane2->normal, plane2->dist, 0 ); // PLANESIDE_EPSILON);
	}

	if ( !w || WindingIsTiny( w ) ) { // the brush isn't really split
		int side;

		side = BrushMostlyOnSide( brush, plane );
		if ( side == PSIDE_FRONT ) {
			*front = CopyBrush( brush );
		}
		if ( side == PSIDE_BACK ) {
			*back = CopyBrush( brush );
		}
		return;
	}

	if ( WindingIsHuge( w ) ) {
		Sys_FPrintf( SYS_VRB,"WARNING: huge winding\n" );
	}

	midwinding = w;

	// split it for real

	for ( i = 0 ; i < 2 ; i++ )
	{
		b[i] = AllocBrush( brush->numsides + 1 );
		memcpy( b[i], brush, sizeof( brush_t ) - sizeof( brush->sides ) );
		b[i]->numsides = 0;
		b[i]->next = NULL;
		b[i]->original = brush->original;
	}

	// split all the current windings

	for ( i = 0 ; i < brush->numsides ; i++ )
	{
		s = &brush->sides[i];
		w = s->winding;
		if ( !w ) {
			continue;
		}
		/* strict, in parallel case we get the face back because it also is the midwinding */
		ClipWindingEpsilonStrict( w, plane->normal, plane->dist,
							0 /*PLANESIDE_EPSILON*/, &cw[0], &cw[1] );
		for ( j = 0 ; j < 2 ; j++ )
		{
			if ( !cw[j] ) {
				continue;
			}
//.........这里部分代码省略.........

开发者ID:xonotic，项目名称:netradient，代码行数:101，代码来源:brush.c

示例13: SplitBrush

void SplitBrush( bspbrush_t *brush, int planenum, bspbrush_t **front, bspbrush_t **back )
{
	bspbrush_t	*b[2];
	int			i, j;
	winding_t	*w, *cw[2], *midwinding;
	plane_t		*plane, *plane2;
	side_t		*s, *cs;
	float		d, d_front, d_back;

	*front = *back = NULL;
	plane = &g_MainMap->mapplanes[planenum];

	// check all points
	d_front = d_back = 0;
	for (i=0 ; i<brush->numsides ; i++)
	{
		w = brush->sides[i].winding;
		if (!w)
			continue;
		for (j=0 ; j<w->numpoints ; j++)
		{
			d = DotProduct (w->p[j], plane->normal) - plane->dist;
			if (d > 0 && d > d_front)
				d_front = d;
			if (d < 0 && d < d_back)
				d_back = d;
		}
	}

	if (d_front < 0.1) // PLANESIDE_EPSILON)
	{	// only on back
		*back = CopyBrush (brush);
		return;
	}
	if (d_back > -0.1) // PLANESIDE_EPSILON)
	{	// only on front
		*front = CopyBrush (brush);
		return;
	}


	// Move the CSG problem so that offset is at the origin
	// This gives us much better floating point precision in the clipping operations
	Vector offset = -0.5f * (brush->mins + brush->maxs);
	// create a new winding from the split plane

	w = BaseWindingForPlane (plane->normal, plane->dist + DotProduct(plane->normal,offset));
	for (i=0 ; i<brush->numsides && w ; i++)
	{
		plane2 = &g_MainMap->mapplanes[brush->sides[i].planenum ^ 1];
		ChopWindingInPlace (&w, plane2->normal, plane2->dist+DotProduct(plane2->normal,offset), 0); // PLANESIDE_EPSILON);
	}

	if (!w || WindingIsTiny (w) )
	{	// the brush isn't really split
		int		side;

		side = BrushMostlyOnSide (brush, plane);
		if (side == PSIDE_FRONT)
			*front = CopyBrush (brush);
		if (side == PSIDE_BACK)
			*back = CopyBrush (brush);
		return;
	}

	if (WindingIsHuge (w))
	{
		qprintf ("WARNING: huge winding\n");
	}

	TranslateWinding( w, -offset );
	midwinding = w;

    //
    //
	// split it for real
    //
    //

    //
    // allocate two new brushes referencing the original
    //
	for( i = 0; i < 2; i++ )
	{
		b[i] = AllocBrush( brush->numsides + 1 );
		b[i]->original = brush->original;
	}

    //
	// split all the current windings
    //
	for( i = 0; i < brush->numsides; i++ )
	{
        // get the current side
		s = &brush->sides[i];

        // get the sides winding
		w = s->winding;
		if( !w )
			continue;
//.........这里部分代码省略.........

开发者ID:wouterpleizier，项目名称:source-sdk-2013，代码行数:101，代码来源:brushbsp.cpp

示例14: CreateBrushWindings

qboolean CreateBrushWindings( brush_t *brush ){
	int i, j;
#if Q3MAP2_EXPERIMENTAL_HIGH_PRECISION_MATH_FIXES
	winding_accu_t  *w;
#else
	winding_t   *w;
#endif
	side_t      *side;
	plane_t     *plane;


	/* walk the list of brush sides */
	for ( i = 0; i < brush->numsides; i++ )
	{
		/* get side and plane */
		side = &brush->sides[ i ];
		plane = &mapplanes[ side->planenum ];

		/* make huge winding */
#if Q3MAP2_EXPERIMENTAL_HIGH_PRECISION_MATH_FIXES
		w = BaseWindingForPlaneAccu( plane->normal, plane->dist );
#else
		w = BaseWindingForPlane( plane->normal, plane->dist );
#endif

		/* walk the list of brush sides */
		for ( j = 0; j < brush->numsides && w != NULL; j++ )
		{
			if ( i == j ) {
				continue;
			}
			if ( brush->sides[ j ].planenum == ( brush->sides[ i ].planenum ^ 1 ) ) {
				continue;       /* back side clipaway */
			}
			if ( brush->sides[ j ].bevel ) {
				continue;
			}
			plane = &mapplanes[ brush->sides[ j ].planenum ^ 1 ];
#if Q3MAP2_EXPERIMENTAL_HIGH_PRECISION_MATH_FIXES
			ChopWindingInPlaceAccu( &w, plane->normal, plane->dist, 0 );
#else
			ChopWindingInPlace( &w, plane->normal, plane->dist, 0 ); // CLIP_EPSILON );
#endif

			/* ydnar: fix broken windings that would generate trifans */
#if Q3MAP2_EXPERIMENTAL_HIGH_PRECISION_MATH_FIXES
			// I think it's better to FixWindingAccu() once after we chop with all planes
			// so that error isn't multiplied.  There is nothing natural about welding
			// the points unless they are the final endpoints.  ChopWindingInPlaceAccu()
			// is able to handle all kinds of degenerate windings.
#else
			FixWinding( w );
#endif
		}

		/* set side winding */
#if Q3MAP2_EXPERIMENTAL_HIGH_PRECISION_MATH_FIXES
		if ( w != NULL ) {
			FixWindingAccu( w );
			if ( w->numpoints < 3 ) {
				FreeWindingAccu( w );
				w = NULL;
			}
		}
		side->winding = ( w ? CopyWindingAccuToRegular( w ) : NULL );
		if ( w ) {
			FreeWindingAccu( w );
		}
#else
		side->winding = w;
#endif
	}

	/* find brush bounds */
	return BoundBrush( brush );
}

开发者ID:xonotic，项目名称:netradient，代码行数:76，代码来源:brush.c

示例15: AAS_FixMapBrush

//===========================================================================
//
// Parameter:				-
// Returns:					-
// Changes Globals:		-
//===========================================================================
void AAS_FixMapBrush(mapbrush_t *brush)
{
	int i, j, planenum;
	float dist;
	winding_t *w;
	plane_t *plane, *plane1, *plane2;
	side_t *side;
	vec3_t normal;

	//calculate the brush bounds
	ClearBounds(brush->mins, brush->maxs);
	for (i = 0; i < brush->numsides; i++)
	{
		plane = &mapplanes[brush->original_sides[i].planenum];
		w = BaseWindingForPlane(plane->normal, plane->dist);
		for (j = 0; j < brush->numsides && w; j++)
		{
			if (i == j) continue;
			//there are no brush bevels marked but who cares :)
			if (brush->original_sides[j].flags & SFL_BEVEL) continue;
			plane = &mapplanes[brush->original_sides[j].planenum^1];
			ChopWindingInPlace(&w, plane->normal, plane->dist, 0); //CLIP_EPSILON);
		} //end for

		side = &brush->original_sides[i];
		side->winding = w;
		if (w)
		{
			for (j = 0; j < w->numpoints; j++)
			{
				AddPointToBounds(w->p[j], brush->mins, brush->maxs);
			} //end for
		} //end if
	} //end for
	//
	for (i = 0; i < brush->numsides; i++)
	{
		for (j = 0; j < brush->numsides; j++)
		{
			if (i == j) continue;
			plane1 = &mapplanes[brush->original_sides[i].planenum];
			plane2 = &mapplanes[brush->original_sides[j].planenum];
			if (WindingsNonConvex(brush->original_sides[i].winding,
									brush->original_sides[j].winding,
									plane1->normal, plane2->normal,
									plane1->dist, plane2->dist))
			{
				Log_Print("non convex brush");
			} //end if
		} //end for
	} //end for

	//NOW close the fucking brush!!
	for (i = 0; i < 3; i++)
	{
		if (brush->mins[i] < -MAX_MAP_BOUNDS)
		{
			VectorClear(normal);
			normal[i] = -1;
			dist = MAX_MAP_BOUNDS - 10;
			planenum = FindFloatPlane(normal, dist);
			//
			Log_Print("mins out of range: added extra brush side\n");
			AAS_AddMapBrushSide(brush, planenum);
		} //end if
		if (brush->maxs[i] > MAX_MAP_BOUNDS)
		{
			VectorClear(normal);
			normal[i] = 1;
			dist = MAX_MAP_BOUNDS - 10;
			planenum = FindFloatPlane(normal, dist);
			//
			Log_Print("maxs out of range: added extra brush side\n");
			AAS_AddMapBrushSide(brush, planenum);
		} //end if
		if (brush->mins[i] > MAX_MAP_BOUNDS || brush->maxs[i] < -MAX_MAP_BOUNDS)
		{
			Log_Print("entity %i, brush %i: no visible sides on brush\n", brush->entitynum, brush->brushnum);
		} //end if
	} //end for
	//free all the windings
	FreeBrushWindings(brush);
} //end of the function AAS_FixMapBrush

开发者ID:Cpasjuste，项目名称:quake3_pandora_gles，代码行数:89，代码来源:aas_map.c

示例16: Q1_SplitBrush

//===========================================================================
// Generates two new brushes, leaving the original
// unchanged
//
// modified for Half-Life because there are quite a lot of tiny node leaves
// in the Half-Life bsps
//
// Parameter:				-
// Returns:					-
// Changes Globals:		-
//===========================================================================
void Q1_SplitBrush(bspbrush_t *brush, int planenum, int nodenum,
                   bspbrush_t **front, bspbrush_t **back)
{
    bspbrush_t *b[2];
    int i, j;
    winding_t *w, *cw[2], *midwinding;
    plane_t *plane, *plane2;
    side_t *s, *cs;
    float d, d_front, d_back;

    *front = *back = NULL;
    plane = &mapplanes[planenum];

    // check all points
    d_front = d_back = 0;
    for (i=0 ; i<brush->numsides ; i++)
    {
        w = brush->sides[i].winding;
        if (!w)
            continue;
        for (j=0 ; j<w->numpoints ; j++)
        {
            d = DotProduct (w->p[j], plane->normal) - plane->dist;
            if (d > 0 && d > d_front)
                d_front = d;
            if (d < 0 && d < d_back)
                d_back = d;
        } //end for
    } //end for

    if (d_front < 0.1) // PLANESIDE_EPSILON)
    {   // only on back
        *back = CopyBrush (brush);
        Log_Print("Q1_SplitBrush: only on back\n");
        return;
    } //end if
    if (d_back > -0.1) // PLANESIDE_EPSILON)
    {   // only on front
        *front = CopyBrush (brush);
        Log_Print("Q1_SplitBrush: only on front\n");
        return;
    } //end if

    // create a new winding from the split plane

    w = BaseWindingForPlane (plane->normal, plane->dist);
    for (i = 0; i < brush->numsides && w; i++)
    {
        plane2 = &mapplanes[brush->sides[i].planenum ^ 1];
        ChopWindingInPlace(&w, plane2->normal, plane2->dist, 0); // PLANESIDE_EPSILON);
    } //end for

    if (!w || WindingIsTiny(w))
    {   // the brush isn't really split
        int		side;

        Log_Print("Q1_SplitBrush: no split winding\n");
        side = BrushMostlyOnSide (brush, plane);
        if (side == PSIDE_FRONT)
            *front = CopyBrush (brush);
        if (side == PSIDE_BACK)
            *back = CopyBrush (brush);
        return;
    }

    if (WindingIsHuge(w))
    {
        Log_Print("Q1_SplitBrush: WARNING huge split winding\n");
    } //end of

    midwinding = w;

    // split it for real

    for (i = 0; i < 2; i++)
    {
        b[i] = AllocBrush (brush->numsides+1);
        b[i]->original = brush->original;
    } //end for

    // split all the current windings

    for (i=0 ; i<brush->numsides ; i++)
    {
        s = &brush->sides[i];
        w = s->winding;
        if (!w)
            continue;
        ClipWindingEpsilon (w, plane->normal, plane->dist,
//.........这里部分代码省略.........

开发者ID:he110world，项目名称:quake3-ios，代码行数:101，代码来源:map_q1.c

示例17: SplitBrush

/*
================
SplitBrush

Generates two new brushes, leaving the original
unchanged
================
*/
void SplitBrush (bspbrush_t *brush, int planenum,
	bspbrush_t **front, bspbrush_t **back)
{
	bspbrush_t	*b[2];
	int			i, j;
	winding_t	*w, *cw[2], *midwinding;
	plane_t		*plane, *plane2;
	side_t		*s, *cs;
	float		d, d_front, d_back;

	*front = *back = NULL;
	plane = &mapplanes[planenum];

	// check all points
	d_front = d_back = 0;
	for (i=0 ; i<brush->numsides ; i++)
	{
		w = brush->sides[i].winding;
		if (!w)
			continue;
		for (j=0 ; j<w->numpoints ; j++)
		{
			d = DotProduct (w->p[j], plane->normal) - plane->dist;
			if (d > 0 && d > d_front)
				d_front = d;
			if (d < 0 && d < d_back)
				d_back = d;
		}
	}
	if (d_front < 0.1) // PLANESIDE_EPSILON)
	{	// only on back
		*back = CopyBrush (brush);
		return;
	}
	if (d_back > -0.1) // PLANESIDE_EPSILON)
	{	// only on front
		*front = CopyBrush (brush);
		return;
	}

	// create a new winding from the split plane

	w = BaseWindingForPlane (plane->normal, plane->dist);
	for (i=0 ; i<brush->numsides && w ; i++)
	{
		plane2 = &mapplanes[brush->sides[i].planenum ^ 1];
		ChopWindingInPlace (&w, plane2->normal, plane2->dist, 0); // PLANESIDE_EPSILON);
	}

	if (!w || WindingIsTiny (w) )
	{	// the brush isn't really split
		int		side;

		side = BrushMostlyOnSide (brush, plane);
		if (side == PSIDE_FRONT)
			*front = CopyBrush (brush);
		if (side == PSIDE_BACK)
			*back = CopyBrush (brush);
		return;
	}

	if (WindingIsHuge (w))
	{
		qprintf ("WARNING: huge winding\n");
	}

	midwinding = w;

	// split it for real

	for (i=0 ; i<2 ; i++)
	{
		b[i] = AllocBrush (brush->numsides+1);
		b[i]->original = brush->original;
	}

	// split all the current windings

	for (i=0 ; i<brush->numsides ; i++)
	{
		s = &brush->sides[i];
		w = s->winding;
		if (!w)
			continue;
		ClipWindingEpsilon (w, plane->normal, plane->dist,
			0 /*PLANESIDE_EPSILON*/, &cw[0], &cw[1]);
		for (j=0 ; j<2 ; j++)
		{
			if (!cw[j])
				continue;
#if 0
			if (WindingIsTiny (cw[j]))
//.........这里部分代码省略.........

开发者ID:hypov8，项目名称:quake2_texture_fix，代码行数:101，代码来源:brushbsp.c

示例18: CutNodePortals_r

/*
================
CutNodePortals_r
================
*/
static void
CutNodePortals_r(node_t *node)
{
    plane_t *plane, clipplane;
    node_t *f, *b, *other_node;
    portal_t *p, *new_portal, *next_portal;
    winding_t *w, *frontwinding, *backwinding;
    int side;

#ifdef PARANOID
    CheckLeafPortalConsistancy (node);
#endif

    // separate the portals on node into it's children
    if (node->contents)
	return;			// at a leaf, no more dividing

    plane = &pPlanes[node->planenum];

    f = node->children[0];
    b = node->children[1];

    // create the new portal by taking the full plane winding for the cutting plane
    // and clipping it by all of the planes from the other portals
    new_portal = AllocMem(PORTAL, 1, true);
    new_portal->planenum = node->planenum;

    w = BaseWindingForPlane(&pPlanes[node->planenum]);
    side = 0;			// shut up compiler warning
    for (p = node->portals; p; p = p->next[side]) {
	clipplane = pPlanes[p->planenum];
	if (p->nodes[0] == node)
	    side = 0;
	else if (p->nodes[1] == node) {
	    clipplane.dist = -clipplane.dist;
	    VectorSubtract(vec3_origin, clipplane.normal, clipplane.normal);
	    side = 1;
	} else
	    Message(msgError, errMislinkedPortal);

	w = ClipWinding(w, &clipplane, true);
	if (!w) {
	    Message(msgWarning, warnPortalClippedAway);
	    break;
	}
    }

    if (w) {
	// if the plane was not clipped on all sides, there was an error
	new_portal->winding = w;
	AddPortalToNodes(new_portal, f, b);
    }
    // partition the portals
    for (p = node->portals; p; p = next_portal) {
	if (p->nodes[0] == node)
	    side = 0;
	else if (p->nodes[1] == node)
	    side = 1;
	else
	    Message(msgError, errMislinkedPortal);
	next_portal = p->next[side];

	other_node = p->nodes[!side];
	RemovePortalFromNode(p, p->nodes[0]);
	RemovePortalFromNode(p, p->nodes[1]);

	// cut the portal into two portals, one on each side of the cut plane
	DivideWinding(p->winding, plane, &frontwinding, &backwinding);

	if (!frontwinding) {
	    if (side == 0)
		AddPortalToNodes(p, b, other_node);
	    else
		AddPortalToNodes(p, other_node, b);
	    continue;
	}
	if (!backwinding) {
	    if (side == 0)
		AddPortalToNodes(p, f, other_node);
	    else
		AddPortalToNodes(p, other_node, f);
	    continue;
	}
	// the winding is split
	new_portal = AllocMem(PORTAL, 1, true);
	*new_portal = *p;
	new_portal->winding = backwinding;
	FreeMem(p->winding, WINDING, 1);
	p->winding = frontwinding;

	if (side == 0) {
	    AddPortalToNodes(p, f, other_node);
	    AddPortalToNodes(new_portal, b, other_node);
	} else {
	    AddPortalToNodes(p, other_node, f);
//.........这里部分代码省略.........

开发者ID:AidHamza，项目名称:eviltoys，代码行数:101，代码来源:portals.c

示例19: AAS_MakeBrushWindings

//===========================================================================
//
// Parameter:				-
// Returns:					-
// Changes Globals:		-
//===========================================================================
qboolean AAS_MakeBrushWindings(mapbrush_t *ob)
{
	int			i, j;
	winding_t	*w;
	side_t		*side;
	plane_t		*plane, *plane1, *plane2;

	ClearBounds (ob->mins, ob->maxs);

	for (i = 0; i < ob->numsides; i++)
	{
		plane = &mapplanes[ob->original_sides[i].planenum];
		w = BaseWindingForPlane(plane->normal, plane->dist);
		for (j = 0; j <ob->numsides && w; j++)
		{
			if (i == j) continue;
			if (ob->original_sides[j].flags & SFL_BEVEL) continue;
			plane = &mapplanes[ob->original_sides[j].planenum^1];
			ChopWindingInPlace(&w, plane->normal, plane->dist, 0); //CLIP_EPSILON);
		}

		side = &ob->original_sides[i];
		side->winding = w;
		if (w)
		{
			side->flags |= SFL_VISIBLE;
			for (j = 0; j < w->numpoints; j++)
				AddPointToBounds (w->p[j], ob->mins, ob->maxs);
		}
	}
	//check if the brush is convex
	for (i = 0; i < ob->numsides; i++)
	{
		for (j = 0; j < ob->numsides; j++)
		{
			if (i == j) continue;
			plane1 = &mapplanes[ob->original_sides[i].planenum];
			plane2 = &mapplanes[ob->original_sides[j].planenum];
			if (WindingsNonConvex(ob->original_sides[i].winding,
									ob->original_sides[j].winding,
									plane1->normal, plane2->normal,
									plane1->dist, plane2->dist))
			{
				Log_Print("non convex brush");
			} //end if
		} //end for
	} //end for
	//check for out of bound brushes
	for (i = 0; i < 3; i++)
	{
		//IDBUG: all the indexes into the mins and maxs were zero (not using i)
		if (ob->mins[i] < -MAX_MAP_BOUNDS || ob->maxs[i] > MAX_MAP_BOUNDS)
		{
			Log_Print("entity %i, brush %i: bounds out of range\n", ob->entitynum, ob->brushnum);
			Log_Print("ob->mins[%d] = %f, ob->maxs[%d] = %f\n", i, ob->mins[i], i, ob->maxs[i]);
			ob->numsides = 0; //remove the brush
			break;
		} //end if
		if (ob->mins[i] > MAX_MAP_BOUNDS || ob->maxs[i] < -MAX_MAP_BOUNDS)
		{
			Log_Print("entity %i, brush %i: no visible sides on brush\n", ob->entitynum, ob->brushnum);
			Log_Print("ob->mins[%d] = %f, ob->maxs[%d] = %f\n", i, ob->mins[i], i, ob->maxs[i]);
			ob->numsides = 0; //remove the brush
			break;
		} //end if
	} //end for
	return true;
} //end of the function AAS_MakeBrushWindings

开发者ID:Cpasjuste，项目名称:quake3_pandora_gles，代码行数:74，代码来源:aas_map.c

示例20: CM_DrawDebugSurface

void CM_DrawDebugSurface( void (*drawPoly)(int color, int numPoints, bfixed *points) ) {
	static cvar_t	*cv;
#ifndef BSPC
	static cvar_t	*cv2;
#endif
	const patchCollide_t	*pc;
	facet_t			*facet;
	winding_t		*w;
	int				i, j, k, n;
	int				curplanenum, planenum, curinward, inward;
	planeDef_t		plane;
	bvec3_t mins = {-BFIXED(15,0), -BFIXED(15,0), -BFIXED(28,0)}, maxs = {BFIXED(15,0), BFIXED(15,0), BFIXED(28,0)};
	//bvec3_t mins = {BFIXED_0, BFIXED_0, BFIXED_0}, maxs = {BFIXED_0, BFIXED_0, BFIXED_0};
	bvec3_t v1;
	avec3_t v2;

#ifndef BSPC
	if ( !cv2 )
	{
		cv2 = Cvar_Get( "r_debugSurface", "0", 0 );
	}

	if (cv2->integer != 1)
	{
		BotDrawDebugPolygons(drawPoly, cv2->integer);
		return;
	}
#endif

	if ( !debugPatchCollide ) {
		return;
	}

#ifndef BSPC
	if ( !cv ) {
		cv = Cvar_Get( "cm_debugSize", "2", 0 );
	}
#endif
	pc = debugPatchCollide;

	for ( i = 0, facet = pc->facets ; i < pc->numFacets ; i++, facet++ ) {

		for ( k = 0 ; k < facet->numBorders + 1; k++ ) {
			//
			if (k < facet->numBorders) {
				planenum = facet->borderPlanes[k];
				inward = facet->borderInward[k];
			}
			else {
				planenum = facet->surfacePlane;
				inward = qfalse;
				//continue;
			}

			VectorCopy( pc->planes[ planenum ].pd.normal, plane.normal );
			plane.dist=pc->planes[ planenum ].pd.dist;

			//planenum = facet->surfacePlane;
			if ( inward ) {
				VectorSubtract( avec3_origin, plane.normal, plane.normal );
				plane.dist = -plane.dist;
			}

			plane.dist += MAKE_BFIXED(cv->value);
			//*
			for (n = 0; n < 3; n++)
			{
				if (plane.normal[n] > AFIXED_0) v1[n] = maxs[n];
				else v1[n] = mins[n];
			} //end for
			VectorNegate(plane.normal, v2);
			plane.dist += FIXED_ABS(FIXED_VEC3DOT(v1, v2));
			//*/

			w = BaseWindingForPlane( plane.normal,  plane.dist );
			for ( j = 0 ; j < facet->numBorders + 1 && w; j++ ) {
				//
				if (j < facet->numBorders) {
					curplanenum = facet->borderPlanes[j];
					curinward = facet->borderInward[j];

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ Basename函数代码示例发布时间：2022-05-30

C++ BaseType函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18334|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9702|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8193|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8560|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8471|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9412|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8443|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7875|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8427|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7403|2022-11-06

客服电话

电子邮件

C++ BaseWindingForPlane函数代码示例

示例1: MakeBrushWindings

示例2: TestExpandBrushes

示例3: CM_ValidateFacet

示例4: MakeNodePortal

示例5: MakeBrushWindings

示例6: BSPBrushWindings

示例7: MakeBrushWindings

示例8: BaseWindingForPlane

示例9: WriteBSPBrushMap

示例10: CreateBrushWindings

示例11: WriteBSPBrushMap

示例12: SplitBrush

示例13: SplitBrush

示例14: CreateBrushWindings

示例15: AAS_FixMapBrush

示例16: Q1_SplitBrush

示例17: SplitBrush

示例18: CutNodePortals_r

示例19: AAS_MakeBrushWindings

示例20: CM_DrawDebugSurface

请发表评论

全部评论

上一篇：

下一篇：

theindianappguy/machine_learning_flutter

samaxes/minify-maven-plugin: Combine and

挨打的读音是什么？是āi dǎ还是ái dǎ？

微信小程序公告滚动通知 - 子钦加油

nacika-ins/nanachibot: nanachibot is Rus

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053