C++ CLS1_SendHelpStr函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中CLS1_SendHelpStr函数的典型用法代码示例。如果您正苦于以下问题：C++ CLS1_SendHelpStr函数的具体用法？C++ CLS1_SendHelpStr怎么用？C++ CLS1_SendHelpStr使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了CLS1_SendHelpStr函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: BLEUART_CMDMODE_ParseCommand

uint8_t BLEUART_CMDMODE_ParseCommand(const unsigned char *cmd, bool *handled, const CLS1_StdIOType *io) {
  uint8_t res = ERR_OK;

  if (UTIL1_strcmp((char*)cmd, CLS1_CMD_HELP)==0 || UTIL1_strcmp((char*)cmd, "uart help")==0) {
    CLS1_SendHelpStr((unsigned char*)"uart", (const unsigned char*)"Group of Adafruit BLE commands\r\n", io->stdOut);
    CLS1_SendHelpStr((unsigned char*)"  help|status", (const unsigned char*)"Print help or status information\r\n", io->stdOut);
    CLS1_SendHelpStr((unsigned char*)"  enable", (unsigned char*)"Enable BLE UART\r\n", io->stdOut);
    CLS1_SendHelpStr((unsigned char*)"  disable", (unsigned char*)"Disable BLE UART\r\n", io->stdOut);
    CLS1_SendHelpStr((unsigned char*)"  tx <string>", (unsigned char*)"Send string\r\n", io->stdOut);
    *handled = TRUE;
    return ERR_OK;
  } else if ((UTIL1_strcmp((char*)cmd, CLS1_CMD_STATUS)==0) || (UTIL1_strcmp((char*)cmd, "uart status")==0)) {
    *handled = TRUE;
    return PrintStatus(io);
  } else if (UTIL1_strcmp((char*)cmd, "uart enable")==0) {
    isEnabled = TRUE;
    *handled = TRUE;
  } else if (UTIL1_strcmp((char*)cmd, "uart disable")==0) {
    isEnabled = FALSE;
    *handled = TRUE;
  } else if (UTIL1_strncmp((char*)cmd, "uart tx ", sizeof("uart tx ") - 1) == 0) {
    *handled = TRUE;
    taskENTER_CRITICAL();
    UTIL1_strcpy(txBuffer, sizeof(txBuffer), cmd+sizeof("uart tx ")-1);
    UTIL1_strcat(txBuffer, sizeof(txBuffer), "\\n\n"); /* add newline */
    taskEXIT_CRITICAL();
  }
  return res; /* no error */
}

开发者ID:mbangtri，项目名称:mcuoneclipse，代码行数:29，代码来源:bleuart_cmdmode.c

示例2: MM_ParseCommand

uint8_t MM_ParseCommand(const unsigned char *cmd, bool *handled, const CLS1_StdIOType *io) {
  const uint8_t *p;
  uint8_t res;
  int32_t tmp;

  if (UTIL1_strcmp((char*)cmd, CLS1_CMD_HELP)==0 || UTIL1_strcmp((char*)cmd, "midi help")==0) {
     CLS1_SendHelpStr((unsigned char*)"midi", (const unsigned char*)"Group of midi commands\r\n", io->stdOut);
     CLS1_SendHelpStr((unsigned char*)"  help|status", (unsigned char*)"Print help or status information\r\n", io->stdOut);
     CLS1_SendHelpStr((unsigned char*)"  play <number>", (const unsigned char*)"Play midi song (0, 1)\r\n", io->stdOut);
     *handled = TRUE;
     return ERR_OK;
   } else if ((UTIL1_strcmp((char*)cmd, CLS1_CMD_STATUS)==0) || (UTIL1_strcmp((char*)cmd, "midi status")==0)) {
     *handled = TRUE;
     return PrintStatus(io);
   } else if (UTIL1_strncmp((char*)cmd, "midi play", sizeof("midi play")-1)==0) {
     p = cmd+sizeof("midi play")-1;
     res = UTIL1_xatoi(&p, &tmp);
     if (res==ERR_OK && tmp>=0) {
       *handled = TRUE;
       if (tmp==0) {
         MM_Play();
       } else if (tmp==1) {
         MM_PlayPirate();
       }
     }
     return res;
   }
  return ERR_OK;
}

开发者ID:AdarshJayakumar，项目名称:mcuoneclipse，代码行数:29，代码来源:MidiMusic.c

示例3: RADIO_PrintHelp

static void RADIO_PrintHelp(const CLS1_StdIOType *io) {
  CLS1_SendHelpStr((unsigned char*)"radio", (unsigned char*)"Group of radio commands\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  help|status", (unsigned char*)"Shows radio help or status\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  channel <number>", (unsigned char*)"Switches to the given channel. Channel must be in the range 0..127\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  power <number>", (unsigned char*)"Changes output power to 0, -10, -12, -18\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  sniff on|off", (unsigned char*)"Turns sniffing on or off\r\n", io->stdOut);
}

开发者ID:210221030，项目名称:mcuoneclipse，代码行数:7，代码来源:Radio.c

示例4: BUZ_PrintHelp

static uint8_t BUZ_PrintHelp(const CLS1_StdIOType *io) {
  CLS1_SendHelpStr((unsigned char*)"buzzer", (unsigned char*)"Group of buzzer commands\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  help|status", (unsigned char*)"Shows radio help or status\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  buz <freq> <time>", (unsigned char*)"Beep for time (ms) and frequency (kHz)\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  play tune", (unsigned char*)"Play tune\r\n", io->stdOut);
  return ERR_OK;
}

开发者ID:cknuesel，项目名称:INTRO_Maze_it，代码行数:7，代码来源:Buzzer.c

示例5: PrintHelp

static uint8_t PrintHelp(const CLS1_StdIOType *io) {
  CLS1_SendHelpStr((unsigned char*)"ref", (unsigned char*)"Group of Reflectance commands\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  help|status", (unsigned char*)"Print help or status information\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  calib (on|off)", (unsigned char*)"Calibrate while moving sensor over line\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  led (on|off)", (unsigned char*)"Uses LED or not\r\n", io->stdOut);
  return ERR_OK;
}

开发者ID:sethj00，项目名称:mcuoneclipse，代码行数:7，代码来源:Reflectance.c

示例6: APP_PrintHelp

static void APP_PrintHelp(const CLS1_StdIOType *io) {
  CLS1_SendHelpStr((unsigned char*)"app", (unsigned char*)"Group of app commands\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  help|status", (unsigned char*)"Shows radio help or status\r\n", io->stdOut);
#if PL_APP_FOLLOW_OBSTACLE
  CLS1_SendHelpStr((unsigned char*)"  follow (on|off)", (unsigned char*)"Obstacle following on or off\r\n", io->stdOut);
#endif
}

开发者ID:sethj00，项目名称:mcuoneclipse，代码行数:7，代码来源:Application.c

示例7: TRACE_PrintHelp

/*!
 * \brief Prints the help text to the console
 * \param io I/O channel to be used
 */
static void TRACE_PrintHelp(const CLS1_StdIOType *io) {
  CLS1_SendHelpStr((unsigned char*)"trace", (unsigned char*)"Group of trace commands\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  help|status", (unsigned char*)"Shows trace help or status\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  none|shell", (unsigned char*)"Sets the trace channel to be used\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  accel on|off", (unsigned char*)"Enables or disables accelerometer trace\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  magnetometer on|off", (unsigned char*)"Enables or disables magnetometer trace\r\n", io->stdOut);
}

开发者ID:jeffyoon，项目名称:mcuoneclipse，代码行数:11，代码来源:Trace.c

示例8: PID_PrintHelp

static void PID_PrintHelp(const CLS1_StdIOType *io) {
  CLS1_SendHelpStr((unsigned char*)"pid", (unsigned char*)"Group of PID commands\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  help|status", (unsigned char*)"Shows PID help or status\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  speed (L|R) (p|d|i|w) <value>", (unsigned char*)"Sets P, D, I or anti-windup position value\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  pos (L|R) (p|d|i|w) <value>", (unsigned char*)"Sets P, D, I or anti-windup position value\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  dis (p|d|i|w) <value>", (unsigned char*)"Sets P, D, I or anti-windup position value\r\n", io->stdOut);
}

开发者ID:tbmathis，项目名称:SUMO，代码行数:7，代码来源:Pid.c

示例9: BL_PrintHelp

static void BL_PrintHelp(CLS1_ConstStdIOType *io) {
  CLS1_SendHelpStr((unsigned char*)"BL", (const unsigned char*)"Group of Bootloader commands\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  help|status", (const unsigned char*)"Print help or status information\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  erase", (const unsigned char*)"Erase application flash blocks\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  restart", (const unsigned char*)"Restart application with jump to reset vector\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  load s19", (const unsigned char*)"Load S19 file\r\n", io->stdOut);
}

开发者ID:ADeadCat，项目名称:mcuoneclipse，代码行数:7，代码来源:Bootloader.c

示例10: CLS1_ParseCommand

/*
** ===================================================================
**     Method      :  CLS1_ParseCommand (component Shell)
**     Description :
**         Parses a shell command. Use 'help' to get a list of
**         supported commands.
**     Parameters  :
**         NAME            - DESCRIPTION
**       * cmd             - Pointer to command string
**       * handled         - Pointer to variable to indicate if
**                           the command has been handled. The caller
**                           passes this variable to the command scanner
**                           to find out if the passed command has been
**                           handled. The variable is initialized by the
**                           caller.
**       * io              - Pointer to I/O callbacks
**     Returns     :
**         ---             - Error code
** ===================================================================
*/
uint8_t CLS1_ParseCommand(const uint8_t *cmd, bool *handled, CLS1_ConstStdIOType *io)
{
  if (UTIL1_strcmp((char*)cmd, CLS1_CMD_HELP)==0 || UTIL1_strcmp((char*)cmd, "CLS1 help")==0) {
    CLS1_SendStr((unsigned char*)"\r\n", io->stdOut);
    CLS1_SendStr((unsigned char*)CLS1_DASH_LINE, io->stdOut);
    CLS1_SendStr((unsigned char*)"\r\n", io->stdOut);
    CLS1_SendStr((unsigned char*)"TWR-KV58F220M", io->stdOut);
    CLS1_SendStr((unsigned char*)"\r\n", io->stdOut);
    CLS1_SendStr((unsigned char*)CLS1_DASH_LINE, io->stdOut);
    CLS1_SendStr((unsigned char*)"\r\n", io->stdOut);
    CLS1_SendHelpStr((unsigned char*)"CLS1", (const unsigned char*)"Group of CLS1 commands\r\n", io->stdOut);
    CLS1_SendHelpStr((unsigned char*)"  help|status", (const unsigned char*)"Print help or status information\r\n", io->stdOut);
#if CLS1_ECHO_ENABLED
    CLS1_SendHelpStr((unsigned char*)"  echo (on|off)", (const unsigned char*)"Turn echo on or off\r\n", io->stdOut);
#endif
    *handled = TRUE;
    return ERR_OK;
#if CLS1_ECHO_ENABLED
  } else if ((UTIL1_strcmp((char*)cmd, "CLS1 echo on")==0)) {
    *handled = TRUE;
    CLS1_EchoEnabled = TRUE;
    return ERR_OK;
  } else if ((UTIL1_strcmp((char*)cmd, "CLS1 echo off")==0)) {
    *handled = TRUE;
    CLS1_EchoEnabled = FALSE;
    return ERR_OK;
#endif
  } else if ((UTIL1_strcmp((char*)cmd, CLS1_CMD_STATUS)==0) || (UTIL1_strcmp((char*)cmd, "CLS1 status")==0)) {
    *handled = TRUE;
    return CLS1_PrintStatus(io);
  }
  return ERR_OK; /* no error */
}

开发者ID:Johnnygx，项目名称:mcuoneclipse，代码行数:53，代码来源:CLS1.c

示例11: PrintHelp

static uint8_t PrintHelp(const CLS1_StdIOType *io) {
  CLS1_SendHelpStr((unsigned char*)"ref", (unsigned char*)"Group of Reflectance commands\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  help|status", (unsigned char*)"Print help or status information\r\n", io->stdOut);
#if REF_START_STOP_CALIB
  CLS1_SendHelpStr((unsigned char*)"  calib (start|stop)", (unsigned char*)"Start/Stop calibrating while moving sensor over line\r\n", io->stdOut);
#endif
  return ERR_OK;
}

开发者ID:Naerrci，项目名称:INTRO_FC-Gring，代码行数:8，代码来源:Reflectance.c

示例12: PrintHelp

/*! 
 * \brief Prints the help text to the console
 * \param io I/O channel to be used
 */
static void PrintHelp(const CLS1_StdIOType *io) {
  CLS1_SendHelpStr((unsigned char *)"LowPower", (unsigned char *)"Group of LowPower commands\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char *)"  help|status", (unsigned char *)"Shows help or status\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char *)"  mode run|wait|sleep|stop", (unsigned char *)"Set low power mode\r\n", io->stdOut);
#if LP_CAN_CHANGE_CLOCK
  CLS1_SendHelpStr((unsigned char *)"  clock fast|medium|slow", (unsigned char *)"Set clock speed mode\r\n", io->stdOut);
#endif
}

开发者ID:AlexanderWiniger，项目名称:mcuoneclipse，代码行数:12，代码来源:LowPower.c

示例13: REMOTE_PrintHelp

static void REMOTE_PrintHelp(const CLS1_StdIOType *io) {
  CLS1_SendHelpStr((unsigned char*)"remote", (unsigned char*)"Group of remote commands\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  help|status", (unsigned char*)"Shows remote help or status\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  on|off", (unsigned char*)"Turns the remote on or off\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  verbose on|off", (unsigned char*)"Turns the verbose mode on or off\r\n", io->stdOut);
#if PL_CONFIG_HAS_JOYSTICK
  CLS1_SendHelpStr((unsigned char*)"  joystick on|off", (unsigned char*)"Use joystick\r\n", io->stdOut);
#endif
}

开发者ID:troopa，项目名称:InfotronikRobot，代码行数:9，代码来源:Remote.c

示例14: PrintHelp

static void PrintHelp(const CLS1_StdIOType *io) {
    CLS1_SendHelpStr((unsigned char*)"app", (unsigned char*)"Group of application commands\r\n", io->stdOut);
    CLS1_SendHelpStr((unsigned char*)"  help", (unsigned char*)"Shows radio help or status\r\n", io->stdOut);
    CLS1_SendHelpStr((unsigned char*)"  saddr 0x<addr>", (unsigned char*)"Set source node address\r\n", io->stdOut);
    CLS1_SendHelpStr((unsigned char*)"  daddr 0x<addr>", (unsigned char*)"Set destination node address\r\n", io->stdOut);
#if PL_HAS_RSTDIO
    CLS1_SendHelpStr((unsigned char*)"  send (in/out/err)", (unsigned char*)"Send a string to stdio using the wireless transceiver\r\n", io->stdOut);
#endif
}

开发者ID:Joteyo，项目名称:mcuoneclipse，代码行数:9，代码来源:RNet_App.c

示例15: MAZE_PrintHelp

static void MAZE_PrintHelp(const CLS1_StdIOType *io) {
	CLS1_SendHelpStr((unsigned char*) "maze",
			(unsigned char*) "Group of maze following commands\r\n",
			io->stdOut);
	CLS1_SendHelpStr((unsigned char*) "  help|status",
			(unsigned char*) "Shows maze help or status\r\n", io->stdOut);
	CLS1_SendHelpStr((unsigned char*) "  clear",
			(unsigned char*) "Clear the maze solution\r\n", io->stdOut);
}

开发者ID:FlavioK，项目名称:intro，代码行数:9，代码来源:Maze.c

示例16: APP_PrintHelp

static void APP_PrintHelp(const CLS1_StdIOType *io) {
  CLS1_SendHelpStr((unsigned char*)"app", (unsigned char*)"Group of app commands\r\n", io->stdOut);
  CLS1_SendHelpStr((unsigned char*)"  help|status", (unsigned char*)"Shows radio help or status\r\n", io->stdOut);
#if PL_APP_FOLLOW_OBSTACLE
  CLS1_SendHelpStr((unsigned char*)"  follow (on|off)", (unsigned char*)"Obstacle following on or off\r\n", io->stdOut);
#endif
#if PL_HAS_LINE_SENSOR
  CLS1_SendHelpStr((unsigned char*)"  autocalib", (unsigned char*)"Automatically calibrate line sensor\r\n", io->stdOut);
#endif
}

开发者ID:BarberCol，项目名称:mcuoneclipse，代码行数:10，代码来源:Application.c

示例17: ESP_PrintHelp

static uint8_t ESP_PrintHelp(const CLS1_StdIOType *io) {
  CLS1_SendHelpStr("ESP", "ESP8200 commands\r\n", io->stdOut);
  //CLS1_SendHelpStr("  help|status", "Print help or status information\r\n", io->stdOut);
  CLS1_SendHelpStr("  send <str>", "Sends a string to the module\r\n", io->stdOut);
  CLS1_SendHelpStr("  test", "Sends a test AT command\r\n", io->stdOut);
  CLS1_SendHelpStr("  restart", "Restart module\r\n", io->stdOut);
  //CLS1_SendHelpStr("  listAP", "List available Access Points\r\n", io->stdOut);
  //CLS1_SendHelpStr("  connectAP \"ssid\",\"pwd\"", "Connect to an Access Point\r\n", io->stdOut);
  CLS1_SendHelpStr("  server (start|stop)", "Start or stop web server\r\n", io->stdOut);
  return ERR_OK;
}

开发者ID:maciekhtc，项目名称:ZRJ-microcontroller，代码行数:11，代码来源:ESP8266.c

示例18: W5100_ParseCommand

uint8_t W5100_ParseCommand(const unsigned char *cmd, bool *handled, CLS1_ConstStdIOType *io) {
  if (UTIL1_strcmp((char*)cmd, CLS1_CMD_HELP)==0 || UTIL1_strcmp((char*)cmd, "w5100 help")==0) {
    CLS1_SendHelpStr((unsigned char*)"w5100", (const unsigned char*)"Group of w5100 commands\r\n", io->stdOut);
    CLS1_SendHelpStr((unsigned char*)"  help|status", (const unsigned char*)"Print help or status information\r\n", io->stdOut);
    *handled = TRUE;
    return ERR_OK;
  } else if (UTIL1_strcmp((char*)cmd, CLS1_CMD_STATUS)==0 || UTIL1_strcmp((char*)cmd, "w5100 status")==0) {
    *handled = TRUE;
    return PrintStatus(io);
  }
  return ERR_OK; /* no error */
}

开发者ID:appserver，项目名称:mcuoneclipse，代码行数:12，代码来源:w5100.c

示例19: BUZ_ParseCommand

uint8_t BUZ_ParseCommand(const unsigned char *cmd, bool *handled, const CLS1_StdIOType *io)
{
	  if (UTIL1_strcmp((char*)cmd, CLS1_CMD_HELP)==0 || UTIL1_strcmp((char*)cmd, "BUZ1 help")==0) {
	    *handled = TRUE;
	    CLS1_SendHelpStr((unsigned char*)"BUZ", (unsigned char*)"Group of BUZ commands\r\n", io->stdOut);
	    CLS1_SendHelpStr((unsigned char*)"  beep", (unsigned char*)"Beep with 1kHz for 1 sec\r\n", io->stdOut);
	    return ERR_OK;
	  } else if (UTIL1_strcmp((char*)cmd, "BUZ beep")==0) {
		  *handled = TRUE;
		  return BUZ_Beep(1000, 1000);
	    }
  return ERR_OK;
}

开发者ID:sisem，项目名称:intro，代码行数:13，代码来源:Buzzer.c

示例20: PrintHelp

static uint8_t PrintHelp(const CLS1_StdIOType *io) {
	CLS1_SendHelpStr((unsigned char*) "player",
			(unsigned char*) "Group of player commands\r\n", io->stdOut);

	CLS1_SendHelpStr((unsigned char*) "  help|status",
			(unsigned char*) "Print help or status information\r\n",
			io->stdOut);

	CLS1_SendHelpStr((unsigned char*) "  volume <number>",
			(unsigned char*) "Set volume, full: 0x0000, 0xFEFE silence\r\n",
			io->stdOut);

	CLS1_SendHelpStr((unsigned char*) "  play <file>",
			(unsigned char*) "Play song file\r\n", io->stdOut);

	CLS1_SendHelpStr((unsigned char*) "  player pause on",
			(unsigned char*) "player pause on \r\n", io->stdOut);

	CLS1_SendHelpStr((unsigned char*) "  player pause off",
			(unsigned char*) "player pause off \r\n", io->stdOut);

	CLS1_SendHelpStr((unsigned char*) "  player stop",
			(unsigned char*) "player stop \r\n", io->stdOut);

	CLS1_SendHelpStr((unsigned char*) "  player setval <val>",
			(unsigned char*) "Sets time duration of alarmlight ", io->stdOut);
	return ERR_OK;
}

开发者ID:danstadelmann，项目名称:BDA_Buzzer，代码行数:28，代码来源:player.c

注：本文中的CLS1_SendHelpStr函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ CLSIDFromProgID函数代码示例发布时间：2022-05-30

C++ CLS1_GetStdio函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18330|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9699|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8193|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8560|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8470|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9410|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8443|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7875|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8427|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7403|2022-11-06

客服电话

电子邮件

C++ CLS1_SendHelpStr函数代码示例

示例1: BLEUART_CMDMODE_ParseCommand

示例2: MM_ParseCommand

示例3: RADIO_PrintHelp

示例4: BUZ_PrintHelp

示例5: PrintHelp

示例6: APP_PrintHelp

示例7: TRACE_PrintHelp

示例8: PID_PrintHelp

示例9: BL_PrintHelp

示例10: CLS1_ParseCommand

示例11: PrintHelp

示例12: PrintHelp

示例13: REMOTE_PrintHelp

示例14: PrintHelp

示例15: MAZE_PrintHelp

示例16: APP_PrintHelp

示例17: ESP_PrintHelp

示例18: W5100_ParseCommand

示例19: BUZ_ParseCommand

示例20: PrintHelp

请发表评论

全部评论

上一篇：

下一篇：

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

CVE-2022-27235

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053