本文整理汇总了C++中CONFIG函数的典型用法代码示例。如果您正苦于以下问题:C++ CONFIG函数的具体用法?C++ CONFIG怎么用?C++ CONFIG使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了CONFIG函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: nl_resize_socket_buffer
void nl_resize_socket_buffer(struct nfct_handle *h)
{
unsigned int s = CONFIG(netlink_buffer_size);
/* already warned that we have reached the maximum buffer size */
if (warned)
return;
/* since sock_setsockopt in net/core/sock.c doubles the size of socket
buffer passed to it using nfnl_rcvbufsiz, only call nfnl_rcvbufsiz
if new value is not greater than netlink_buffer_size_max_grown */
if (s*2 > CONFIG(netlink_buffer_size_max_grown)) {
dlog(LOG_WARNING,
"netlink event socket buffer size cannot "
"be doubled further since it will exceed "
"NetlinkBufferSizeMaxGrowth. We are likely to "
"be losing events, this may lead to "
"unsynchronized replicas. Please, consider "
"increasing netlink socket buffer size via "
"NetlinkBufferSize and "
"NetlinkBufferSizeMaxGrowth clauses in "
"conntrackd.conf");
warned = 1;
return;
}
CONFIG(netlink_buffer_size) = nfnl_rcvbufsiz(nfct_nfnlh(h), s);
/* notify the sysadmin */
dlog(LOG_NOTICE, "netlink event socket buffer size has been doubled "
"to %u bytes", CONFIG(netlink_buffer_size));
}
开发者ID:Distrotech,项目名称:conntrack-tools,代码行数:32,代码来源:netlink.c
示例2: bochs_init
static void bochs_init(struct device *dev)
{
if (CONFIG(LINEAR_FRAMEBUFFER))
bochs_init_linear_fb(dev);
else if (CONFIG(VGA_TEXT_FRAMEBUFFER))
bochs_init_text_mode(dev);
}
开发者ID:canistation,项目名称:coreboot,代码行数:7,代码来源:bochs.c
示例3: acpi_create_gnvs
void acpi_create_gnvs(struct global_nvs_t *gnvs)
{
const struct device *dev = PCH_DEV_LPC;
const struct soc_intel_icelake_config *config = dev->chip_info;
/* Set unknown wake source */
gnvs->pm1i = -1;
/* CPU core count */
gnvs->pcnt = dev_count_cpu();
if (CONFIG(CONSOLE_CBMEM))
/* Update the mem console pointer. */
gnvs->cbmc = (uintptr_t)cbmem_find(CBMEM_ID_CONSOLE);
if (CONFIG(CHROMEOS)) {
/* Initialize Verified Boot data */
chromeos_init_chromeos_acpi(&(gnvs->chromeos));
if (CONFIG(EC_GOOGLE_CHROMEEC)) {
gnvs->chromeos.vbt2 = google_ec_running_ro() ?
ACTIVE_ECFW_RO : ACTIVE_ECFW_RW;
} else
gnvs->chromeos.vbt2 = ACTIVE_ECFW_RO;
}
/* Enable DPTF based on mainboard configuration */
gnvs->dpte = config->dptf_enable;
/* Fill in the Wifi Region id */
gnvs->cid1 = wifi_regulatory_domain();
/* Set USB2/USB3 wake enable bitmaps. */
gnvs->u2we = config->usb2_wake_enable_bitmap;
gnvs->u3we = config->usb3_wake_enable_bitmap;
}
开发者ID:canistation,项目名称:coreboot,代码行数:35,代码来源:acpi.c
示例4: board_BeforeAgesa
void board_BeforeAgesa(struct sysinfo *cb)
{
u8 byte;
/* Enable the AcpiMmio space */
outb(0x24, 0xcd6);
outb(0x1, 0xcd7);
/* Set LPC decode enables. */
pci_devfn_t dev = PCI_DEV(0, 0x14, 3);
pci_write_config32(dev, 0x44, 0xff03ffd5);
if (CONFIG(POST_DEVICE_PCI_PCIE))
hudson_pci_port80();
if (CONFIG(POST_DEVICE_LPC))
hudson_lpc_port80();
/* enable SIO LPC decode */
byte = pci_read_config8(dev, 0x48);
byte |= 3; /* 2e, 2f */
pci_write_config8(dev, 0x48, byte);
/* enable serial decode */
byte = pci_read_config8(dev, 0x44);
byte |= (1 << 6); /* 0x3f8 */
pci_write_config8(dev, 0x44, byte);
/* run ite */
sbxxx_enable_48mhzout();
ite_conf_clkin(CLKIN_DEV, ITE_UART_CLK_PREDIVIDE_48);
ite_kill_watchdog(GPIO_DEV);
ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
}
开发者ID:canistation,项目名称:coreboot,代码行数:34,代码来源:romstage.c
示例5: CONFIG
floatms_t WallFuel::adjust(int injectorIndex, floatms_t target DECLARE_ENGINE_PARAMETER_SUFFIX) {
if (cisnan(target)) {
return target;
}
// disable this correction for cranking
if (ENGINE(rpmCalculator).isCranking(PASS_ENGINE_PARAMETER_SIGNATURE)) {
return target;
}
float addedToWallCoef = CONFIG(addedToWallCoef);
/**
* What amount of fuel is sucked of the walls, based on current amount of fuel on the wall.
*/
floatms_t suckedOffWallsAmount = wallFuel[injectorIndex] * CONFIG(suckedOffCoef);
floatms_t adjustedFuelPulse = (target - suckedOffWallsAmount) / (1 - addedToWallCoef);
// We can't inject a negative amount of fuel
// If this goes below zero we will be over-fueling slightly,
// but that's ok.
if(adjustedFuelPulse < 0) {
adjustedFuelPulse = 0;
}
float addedToWallsAmount = adjustedFuelPulse * addedToWallCoef;
wallFuel[injectorIndex] += addedToWallsAmount - suckedOffWallsAmount;
engine->wallFuelCorrection = adjustedFuelPulse - target;
return adjustedFuelPulse;
}
开发者ID:yongfeicao,项目名称:rusefi,代码行数:29,代码来源:accel_enrichment.cpp
示例6: nl_resize_socket_buffer
void nl_resize_socket_buffer(struct nfct_handle *h)
{
unsigned int s = CONFIG(netlink_buffer_size) * 2;
/* already warned that we have reached the maximum buffer size */
if (warned)
return;
if (s > CONFIG(netlink_buffer_size_max_grown)) {
dlog(STATE(log), "WARNING: maximum netlink socket buffer "
"size has been reached. We are likely to "
"be losing events, this may lead to "
"unsynchronized replicas. Please, consider "
"increasing netlink socket buffer size via "
"SocketBufferSize and "
"SocketBufferSizeMaxGrown clauses in "
"conntrackd.conf");
s = CONFIG(netlink_buffer_size_max_grown);
warned = 1;
}
CONFIG(netlink_buffer_size) = nfnl_rcvbufsiz(nfct_nfnlh(h), s);
/* notify the sysadmin */
dlog(STATE(log), "netlink socket buffer size has been set to %u bytes",
CONFIG(netlink_buffer_size));
}
开发者ID:OPSF,项目名称:uClinux,代码行数:27,代码来源:netlink.c
示例7: validateMap
/**
* This function adds an error if MAP sensor value is outside of expected range
* @return unchanged mapKPa parameter
*/
float validateMap(float mapKPa DECLARE_ENGINE_PARAMETER_S) {
if (cisnan(mapKPa) || mapKPa < CONFIG(mapErrorLowValue) || mapKPa > CONFIG(mapErrorHighValue)) {
warning(OBD_PCM_Processor_Fault, "invalid MAP value: %f", mapKPa);
return 0;
}
return mapKPa;
}
开发者ID:owenanthonyj,项目名称:rusefi,代码行数:11,代码来源:map.cpp
示例8: save_memory_training_data
static void save_memory_training_data(bool s3wake, uint32_t fsp_version)
{
size_t mrc_data_size;
const void *mrc_data;
if (!CONFIG(CACHE_MRC_SETTINGS) || s3wake)
return;
mrc_data = fsp_find_nv_storage_data(&mrc_data_size);
if (!mrc_data) {
printk(BIOS_ERR, "Couldn't find memory training data HOB.\n");
return;
}
/*
* Save MRC Data to CBMEM. By always saving the data this forces
* a retrain after a trip through Chrome OS recovery path. The
* code which saves the data to flash doesn't write if the latest
* training data matches this one.
*/
if (mrc_cache_stash_data(MRC_TRAINING_DATA, fsp_version, mrc_data,
mrc_data_size) < 0)
printk(BIOS_ERR, "Failed to stash MRC data\n");
if (CONFIG(FSP2_0_USES_TPM_MRC_HASH))
mrc_cache_update_hash(mrc_data, mrc_data_size);
}
开发者ID:canistation,项目名称:coreboot,代码行数:27,代码来源:memory_init.c
示例9: fill_console_params
static void fill_console_params(FSPM_UPD *mupd)
{
if (CONFIG(CONSOLE_SERIAL)) {
if (CONFIG(INTEL_LPSS_UART_FOR_CONSOLE)) {
mupd->FspmConfig.SerialDebugPortDevice =
CONFIG_UART_FOR_CONSOLE;
/* use MMIO port type */
mupd->FspmConfig.SerialDebugPortType = 2;
/* use 4 byte register stride */
mupd->FspmConfig.SerialDebugPortStrideSize = 2;
/* used only for port type set to external */
mupd->FspmConfig.SerialDebugPortAddress = 0;
} else if (CONFIG(DRIVERS_UART_8250IO)) {
/* use external UART for debug */
mupd->FspmConfig.SerialDebugPortDevice = 3;
/* use I/O port type */
mupd->FspmConfig.SerialDebugPortType = 1;
/* use 1 byte register stride */
mupd->FspmConfig.SerialDebugPortStrideSize = 0;
/* used only for port type set to external */
mupd->FspmConfig.SerialDebugPortAddress =
CONFIG_TTYS0_BASE;
}
} else {
mupd->FspmConfig.SerialDebugPortType = 0;
}
}
开发者ID:pcengines,项目名称:coreboot,代码行数:27,代码来源:romstage.c
示例10: board_BeforeInitReset
void board_BeforeInitReset(struct sysinfo *cb, AMD_RESET_PARAMS *Reset)
{
FCH_RESET_INTERFACE *FchReset = &Reset->FchInterface;
FchReset->Xhci0Enable = CONFIG(HUDSON_XHCI_ENABLE);
FchReset->Xhci1Enable = CONFIG(HUDSON_XHCI_ENABLE);
FchReset->SataEnable = 1;
FchReset->IdeEnable = 0;
}
开发者ID:canistation,项目名称:coreboot,代码行数:10,代码来源:OemCustomize.c
示例11: CONFIG
bool TrackingBruteForce::initialize(configuration::ConfigurationManager& settings) {
isInitialized = true;
CONFIG(settings, maximumDistance, "TrackingMaximumDistance", 4000);
CONFIG(settings, minimumLifeSpan, "TrackingMinimumLifeSpan", 15); //Currently # Frames, should be in ms...
CONFIG(settings, maximumTimeLostInDoorArea, "MaximumTimeLostInDoorArea", 9); //Currently # Frames, should be in ms...
CONFIG(settings, maximumTimeLostStill, "MaximumTimeLostInDoorArea", 100);
return isInitialized;
}
开发者ID:GroupDenseKitchen,项目名称:KitchenOccupation,代码行数:10,代码来源:TrackingBruteForce.cpp
示例12: return
/*
Request:
MUST NOT have extras.
MUST have key.
MUST have value.
*/
ST_RES *cmd_code_load(CONN *conn, ST_REQ *req, ST_RES *res) {
if(req->extras_sz || !req->key_sz || !req->value_sz)
return(set_error_code(res, MEMCACHE_STATUS_INVALID_ARGUMENTS, NULL));
if(CONFIG(conn)->vx32_disabled) {
return(set_error_code(res, MEMCACHE_STATUS_UNKNOWN_COMMAND, "Command disabled by configuration"));
}
if(NULL != find_process(req->key, req->key_sz))
return(set_error_code(res, MEMCACHE_STATUS_KEY_EXISTS, NULL));
int r;
char c_file[1024];
char elf_file[1024];
char keyprefix[32];
key_escape(keyprefix, sizeof(keyprefix), req->key, req->key_sz);
keyprefix[MIN(req->key_sz, sizeof(keyprefix)-1)] = '\0'; // make it reasonably short
snprintf(c_file, sizeof(c_file), "%s/plugin-%s.c", CONFIG(conn)->tmpdir, keyprefix);
snprintf(elf_file, sizeof(elf_file), "%s/plugin-%s.elf", CONFIG(conn)->tmpdir, keyprefix);
res->value = res->buf;
r = write_file(c_file, req->value, req->value_sz);
if(0 != r) { // never
res->status = MEMCACHE_STATUS_ITEM_NOT_STORED;
res->value_sz += snprintf(&res->value[res->value_sz], res->buf_sz - res->value_sz, "Error while saving file: %s", strerror(errno));
return(res);
}
if(0 != process_compile(CONFIG(conn), c_file, elf_file, res->value, res->buf_sz, (int*)&res->value_sz)) {
res->status = MEMCACHE_STATUS_ITEM_NOT_STORED;
return(res);
}
res->value_sz = MIN(res->value_sz, 4096); // no more than 4k logs
res->value[res->value_sz++] = '\n';
res->value[res->value_sz++] = '\n';
struct process *process = process_new(conn, req->key, req->key_sz);
log_warn("#%p: loaded code", process);
r = process_load(process, elf_file);
if(0 != r) { // never
process_free(process);
res->value_sz += snprintf(&res->value[res->value_sz], res->buf_sz - res->value_sz, "Error while loading the binary");
res->status = MEMCACHE_STATUS_ITEM_NOT_STORED;
return(res);
}
if(0 != process_run(conn, process)) {
process_free(process);
res->value_sz += snprintf(&res->value[res->value_sz], res->buf_sz - res->value_sz, "Error while running the binary");
res->status = MEMCACHE_STATUS_ITEM_NOT_STORED;
return(res);
}
res->status = MEMCACHE_STATUS_OK;
return res;
}
开发者ID:Zabrane,项目名称:smalltable,代码行数:61,代码来源:code_commands.c
示例13: platform_fsp_memory_init_params_cb
void platform_fsp_memory_init_params_cb(FSPM_UPD *mupd, uint32_t version)
{
struct region_device rdev;
check_full_retrain(mupd);
fill_console_params(mupd);
if (CONFIG(SOC_INTEL_GLK))
soc_memory_init_params(mupd);
mainboard_memory_init_params(mupd);
parse_devicetree_setting(mupd);
/* Do NOT let FSP do any GPIO pad configuration */
mupd->FspmConfig.PreMemGpioTablePtr = (uintptr_t) NULL;
/*
* Tell CSE we do not need to use Ring Buffer Protocol (RBP) to fetch
* firmware for us if we are using memory-mapped SPI. This lets CSE
* state machine transition to next boot state, so that it can function
* as designed.
*/
mupd->FspmConfig.SkipCseRbp =
CONFIG(BOOT_DEVICE_MEMORY_MAPPED);
/*
* Converged Security Engine (CSE) has secure storage functionality.
* HECI2 device can be used to access that functionality. However, part
* of S3 resume flow involves resetting HECI2 which takes 136ms. Since
* coreboot does not use secure storage functionality, instruct FSP to
* skip HECI2 reset.
*/
mupd->FspmConfig.EnableS3Heci2 = 0;
/*
* Apollolake splits MRC cache into two parts: constant and variable.
* The constant part is not expected to change often and variable is.
* Currently variable part consists of parameters that change on cold
* boots such as scrambler seed and some memory controller registers.
* Scrambler seed is vital for S3 resume case because attempt to use
* wrong/missing key renders DRAM contents useless.
*/
if (mrc_cache_get_current(MRC_VARIABLE_DATA, version, &rdev) == 0) {
/* Assume leaking is ok. */
assert(CONFIG(BOOT_DEVICE_MEMORY_MAPPED));
mupd->FspmConfig.VariableNvsBufferPtr = rdev_mmap_full(&rdev);
}
car_set_var(fsp_version, version);
}
开发者ID:pcengines,项目名称:coreboot,代码行数:54,代码来源:romstage.c
示例14: car_soc_pre_console_init
void car_soc_pre_console_init(void)
{
/* Initialize the controllers */
reg_script_run_on_dev(I2CGPIO_BDF, i2c_gpio_controller_init);
reg_script_run_on_dev(LPC_BDF, legacy_gpio_init);
/* Enable the HSUART */
if (CONFIG(ENABLE_BUILTIN_HSUART0))
reg_script_run_on_dev(HSUART0_BDF, hsuart_init);
if (CONFIG(ENABLE_BUILTIN_HSUART1))
reg_script_run_on_dev(HSUART1_BDF, hsuart_init);
}
开发者ID:canistation,项目名称:coreboot,代码行数:12,代码来源:car.c
示例15: main
int main(int argc, char ** argv)
{
unsigned long size;
long hpage_size;
int pid, status;
int i;
int wait_list[MAX_PROCS];
test_init(argc, argv);
if (argc < 3)
CONFIG("Usage: %s <# procs> <# pages>", argv[0]);
numprocs = atoi(argv[1]);
nr_hugepages = atoi(argv[2]);
if (numprocs > MAX_PROCS)
CONFIG("Cannot spawn more than %d processes", MAX_PROCS);
check_hugetlb_shm_group();
hpage_size = check_hugepagesize();
size = hpage_size * nr_hugepages;
verbose_printf("Requesting %lu bytes\n", size);
if ((shmid = shmget(2, size, SHM_HUGETLB|IPC_CREAT|SHM_R|SHM_W )) < 0)
FAIL("shmget(): %s", strerror(errno));
verbose_printf("shmid: %d\n", shmid);
verbose_printf("Spawning children:\n");
for (i=0; i<numprocs; i++) {
if ((pid = fork()) < 0)
FAIL("fork(): %s", strerror(errno));
if (pid == 0)
do_child(i, size);
wait_list[i] = pid;
}
for (i=0; i<numprocs; i++) {
waitpid(wait_list[i], &status, 0);
if (WEXITSTATUS(status) != 0)
FAIL("Thread %d (pid=%d) failed", i, wait_list[i]);
if (WIFSIGNALED(status))
FAIL("Thread %d (pid=%d) received unhandled signal",
i, wait_list[i]);
}
PASS();
}
开发者ID:Maffblaster,项目名称:libhugetlbfs,代码行数:52,代码来源:shm-fork.c
示例16: display_init_required
int display_init_required(void)
{
/* For vboot always honor vboot_handoff_skip_display_init(). */
if (CONFIG(VBOOT)) {
/* Must always select OPROM_MATTERS when using this function. */
if (!CONFIG(VBOOT_OPROM_MATTERS))
dead_code();
return !vboot_handoff_skip_display_init();
}
/* By default always initialize display. */
return 1;
}
开发者ID:canistation,项目名称:coreboot,代码行数:13,代码来源:bootmode.c
示例17: tco_configure
/*
* Enable TCO BAR using SMBUS TCO base to access TCO related register
* also disable the timer.
*/
void tco_configure(void)
{
if (CONFIG(SOC_INTEL_COMMON_BLOCK_TCO_ENABLE_THROUGH_SMBUS))
tco_enable_bar();
tco_timer_disable();
}
开发者ID:canistation,项目名称:coreboot,代码行数:11,代码来源:tco.c
示例18: init
static timestamp_t
init(void * self, char *args[])
{
config_t * config;
int i;
pkt_t *pkt;
metadesc_t *inmd;
config = mem_mdl_malloc(self, sizeof(config_t));
config->meas_ivl = 1;
config->iface = -1;
for (i = 0; args && args[i]; i++) {
char * wh;
wh = index(args[i], '=') + 1;
if (strstr(args[i], "interval")) {
config->meas_ivl = atoi(wh);
} else if (strstr(args[i], "interface")) {
config->iface = atoi(wh);
}
}
/* setup indesc */
inmd = metadesc_define_in(self, 0);
inmd->ts_resolution = TIME2TS(config->meas_ivl, 0);
pkt = metadesc_tpl_add(inmd, "none:none:none:none");
CONFIG(self) = config;
return TIME2TS(config->meas_ivl, 0);
}
开发者ID:JackieXie168,项目名称:como,代码行数:32,代码来源:traffic.c
示例19: update
static int
update(void * self, pkt_t *pkt, void *fh, int isnew)
{
FLOWDESC *x = F(fh);
config_t * cf = CONFIG(self);
if (isnew) {
bzero(x, sizeof(FLOWDESC));
x->ts = COMO(ts);
}
if (COMO(type) == COMOTYPE_NF) {
if (cf->iface == -1 || H16(NF(input)) == cf->iface) {
x->bytes[0] += H32(NF(pktcount)) * COMO(len) * H16(NF(sampling));
x->pkts[0] += H32(NF(pktcount)) * (uint32_t) H16(NF(sampling));
} else if (H16(NF(output)) == cf->iface) {
x->bytes[1] += H32(NF(pktcount)) * COMO(len) * H16(NF(sampling));
x->pkts[1] += H32(NF(pktcount)) * (uint32_t) H16(NF(sampling));
}
} else if (COMO(type) == COMOTYPE_SFLOW) {
x->bytes[0] += (uint64_t) COMO(len) *
(uint64_t) H32(SFLOW(sampling_rate));
x->pkts[0] += H32(SFLOW(sampling_rate));
} else {
x->bytes[0] += COMO(len);
x->pkts[0]++;
}
return 0;
}
开发者ID:JackieXie168,项目名称:como,代码行数:30,代码来源:traffic.c
示例20: check_free_huge_pages
void check_free_huge_pages(int nr_pages_needed)
{
long hpage_size = gethugepagesize();
int freepages = get_huge_page_counter(hpage_size, HUGEPAGES_FREE);
if (freepages < nr_pages_needed)
CONFIG("Must have at least %i free hugepages", nr_pages_needed);
}
开发者ID:Maffblaster,项目名称:libhugetlbfs,代码行数:7,代码来源:libtestutils.c
注:本文中的CONFIG函数示例整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论