C++ CR_UNLOCK_PACKER_CONTEXT函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中CR_UNLOCK_PACKER_CONTEXT函数的典型用法代码示例。如果您正苦于以下问题：C++ CR_UNLOCK_PACKER_CONTEXT函数的具体用法？C++ CR_UNLOCK_PACKER_CONTEXT怎么用？C++ CR_UNLOCK_PACKER_CONTEXT使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了CR_UNLOCK_PACKER_CONTEXT函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: crPackLoadTransposeMatrixfARB

void PACK_APIENTRY crPackLoadTransposeMatrixfARB( const GLfloat *m )
{
    CR_GET_PACKER_CONTEXT(pc);
    unsigned char *data_ptr;
    int packet_length = 16*sizeof( *m ) + sizeof(GLint) + sizeof(GLenum);
    CR_GET_BUFFERED_POINTER(pc, packet_length );
    WRITE_DATA( 0, GLint, packet_length );
    WRITE_DATA( 4, GLenum, CR_LOADTRANSPOSEMATRIXFARB_EXTEND_OPCODE );
    WRITE_DATA( 8 + 0*sizeof(GLfloat), GLfloat, m[ 0] );
    WRITE_DATA( 8 + 1*sizeof(GLfloat), GLfloat, m[ 1] );
    WRITE_DATA( 8 + 2*sizeof(GLfloat), GLfloat, m[ 2] );
    WRITE_DATA( 8 + 3*sizeof(GLfloat), GLfloat, m[ 3] );
    WRITE_DATA( 8 + 4*sizeof(GLfloat), GLfloat, m[ 4] );
    WRITE_DATA( 8 + 5*sizeof(GLfloat), GLfloat, m[ 5] );
    WRITE_DATA( 8 + 6*sizeof(GLfloat), GLfloat, m[ 6] );
    WRITE_DATA( 8 + 7*sizeof(GLfloat), GLfloat, m[ 7] );
    WRITE_DATA( 8 + 8*sizeof(GLfloat), GLfloat, m[ 8] );
    WRITE_DATA( 8 + 9*sizeof(GLfloat), GLfloat, m[ 9] );
    WRITE_DATA( 8 + 10*sizeof(GLfloat), GLfloat, m[10] );
    WRITE_DATA( 8 + 11*sizeof(GLfloat), GLfloat, m[11] );
    WRITE_DATA( 8 + 12*sizeof(GLfloat), GLfloat, m[12] );
    WRITE_DATA( 8 + 13*sizeof(GLfloat), GLfloat, m[13] );
    WRITE_DATA( 8 + 14*sizeof(GLfloat), GLfloat, m[14] );
    WRITE_DATA( 8 + 15*sizeof(GLfloat), GLfloat, m[15] );
    WRITE_OPCODE( pc, CR_EXTEND_OPCODE );
    CR_UNLOCK_PACKER_CONTEXT(pc);
}

开发者ID:MadHacker217，项目名称:VirtualBox-OSE，代码行数:27，代码来源:pack_matrices.c

示例2: crPackLightfvSWAP

void PACK_APIENTRY crPackLightfvSWAP (GLenum light, GLenum pname, const GLfloat *params)
{
    CR_GET_PACKER_CONTEXT(pc);
    if (__handleLightData( light, pname, params ))
        WRITE_OPCODE( pc, CR_LIGHTFV_OPCODE );
    CR_UNLOCK_PACKER_CONTEXT(pc);
}

开发者ID:bayasist，项目名称:vbox，代码行数:7，代码来源:pack_lights_swap.c

示例3: crPackCombinerParameterfvNV

void PACK_APIENTRY crPackCombinerParameterfvNV( GLenum pname, const GLfloat *params )
{
    CR_GET_PACKER_CONTEXT(pc);
    if (__handleCombinerParameterData( pname, params, CR_COMBINERPARAMETERFVNV_EXTEND_OPCODE ))
        WRITE_OPCODE( pc, CR_EXTEND_OPCODE );
    CR_UNLOCK_PACKER_CONTEXT(pc);
}

开发者ID:MadHacker217，项目名称:VirtualBox-OSE，代码行数:7，代码来源:pack_regcombiner.c

示例4: crPackLoadMatrixf

void PACK_APIENTRY crPackLoadMatrixf( const GLfloat *m )
{
    CR_GET_PACKER_CONTEXT(pc);
    unsigned char *data_ptr;
    int packet_length = 16*sizeof( *m );
    CR_GET_BUFFERED_POINTER(pc, packet_length );
    WRITE_DATA( 0*sizeof(GLfloat), GLfloat, m[ 0] );
    WRITE_DATA( 1*sizeof(GLfloat), GLfloat, m[ 1] );
    WRITE_DATA( 2*sizeof(GLfloat), GLfloat, m[ 2] );
    WRITE_DATA( 3*sizeof(GLfloat), GLfloat, m[ 3] );
    WRITE_DATA( 4*sizeof(GLfloat), GLfloat, m[ 4] );
    WRITE_DATA( 5*sizeof(GLfloat), GLfloat, m[ 5] );
    WRITE_DATA( 6*sizeof(GLfloat), GLfloat, m[ 6] );
    WRITE_DATA( 7*sizeof(GLfloat), GLfloat, m[ 7] );
    WRITE_DATA( 8*sizeof(GLfloat), GLfloat, m[ 8] );
    WRITE_DATA( 9*sizeof(GLfloat), GLfloat, m[ 9] );
    WRITE_DATA( 10*sizeof(GLfloat), GLfloat, m[10] );
    WRITE_DATA( 11*sizeof(GLfloat), GLfloat, m[11] );
    WRITE_DATA( 12*sizeof(GLfloat), GLfloat, m[12] );
    WRITE_DATA( 13*sizeof(GLfloat), GLfloat, m[13] );
    WRITE_DATA( 14*sizeof(GLfloat), GLfloat, m[14] );
    WRITE_DATA( 15*sizeof(GLfloat), GLfloat, m[15] );
    WRITE_OPCODE( pc, CR_LOADMATRIXF_OPCODE );
    CR_UNLOCK_PACKER_CONTEXT(pc);
}

开发者ID:MadHacker217，项目名称:VirtualBox-OSE，代码行数:25，代码来源:pack_matrices.c

示例5: crPackMultMatrixd

void PACK_APIENTRY crPackMultMatrixd( const GLdouble *m )
{
    CR_GET_PACKER_CONTEXT(pc);
    unsigned char *data_ptr;
    int packet_length = 16*sizeof( *m );
    CR_GET_BUFFERED_POINTER(pc, packet_length );
    WRITE_DOUBLE( 0*sizeof(double), m[ 0] );
    WRITE_DOUBLE( 1*sizeof(double), m[ 1] );
    WRITE_DOUBLE( 2*sizeof(double), m[ 2] );
    WRITE_DOUBLE( 3*sizeof(double), m[ 3] );
    WRITE_DOUBLE( 4*sizeof(double), m[ 4] );
    WRITE_DOUBLE( 5*sizeof(double), m[ 5] );
    WRITE_DOUBLE( 6*sizeof(double), m[ 6] );
    WRITE_DOUBLE( 7*sizeof(double), m[ 7] );
    WRITE_DOUBLE( 8*sizeof(double), m[ 8] );
    WRITE_DOUBLE( 9*sizeof(double), m[ 9] );
    WRITE_DOUBLE( 10*sizeof(double), m[10] );
    WRITE_DOUBLE( 11*sizeof(double), m[11] );
    WRITE_DOUBLE( 12*sizeof(double), m[12] );
    WRITE_DOUBLE( 13*sizeof(double), m[13] );
    WRITE_DOUBLE( 14*sizeof(double), m[14] );
    WRITE_DOUBLE( 15*sizeof(double), m[15] );
    WRITE_OPCODE( pc, CR_MULTMATRIXD_OPCODE );
    CR_UNLOCK_PACKER_CONTEXT(pc);
}

开发者ID:MadHacker217，项目名称:VirtualBox-OSE，代码行数:25，代码来源:pack_matrices.c

示例6: crPackWindowVisibleRegion

void PACK_APIENTRY crPackWindowVisibleRegion( CR_PACKER_CONTEXT_ARGDECL GLint window, GLint cRects, const GLint * pRects )
{
    GLint i, size, cnt;

    CR_GET_PACKER_CONTEXT(pc);
    unsigned char *data_ptr;
    (void) pc;
    size = 16 + cRects * 4 * sizeof(GLint);
    CR_GET_BUFFERED_POINTER( pc, size );
    WRITE_DATA( 0, GLint, size );
    WRITE_DATA( 4, GLenum, CR_WINDOWVISIBLEREGION_EXTEND_OPCODE );
    WRITE_DATA( 8, GLint, window );
    WRITE_DATA( 12, GLint, cRects );

    cnt = 16;
    for (i=0; i<cRects; ++i)
    {
        WRITE_DATA(cnt, GLint, (GLint) pRects[4*i+0]);
        WRITE_DATA(cnt+4, GLint, (GLint) pRects[4*i+1]);
        WRITE_DATA(cnt+8, GLint, (GLint) pRects[4*i+2]);
        WRITE_DATA(cnt+12, GLint, (GLint) pRects[4*i+3]);
        cnt += 16;
    }
    WRITE_OPCODE( pc, CR_EXTEND_OPCODE );
    CR_UNLOCK_PACKER_CONTEXT(pc);
}

开发者ID:svn2github，项目名称:virtualbox，代码行数:26，代码来源:pack_visibleregion.c

示例7: crPackAreProgramsResidentNV

void PACK_APIENTRY
crPackAreProgramsResidentNV(GLsizei n, const GLuint * programs,
                                                        GLboolean *residences, GLboolean *return_val,
                                                        int *writeback)
{
    CR_GET_PACKER_CONTEXT(pc);
    unsigned char *data_ptr;
    int packet_length;

    (void) return_val; /* Caller must compute this from residences!!! */

    packet_length = sizeof(int) +   /* packet length */
        sizeof(GLenum) +                        /* extend opcode */
        sizeof(n) +                                 /* num programs */
        n * sizeof(*programs) +         /* programs */
        8 + 8;

    CR_GET_BUFFERED_POINTER(pc, packet_length);
    WRITE_DATA(0, int, packet_length);
    WRITE_DATA(4, GLenum, CR_AREPROGRAMSRESIDENTNV_EXTEND_OPCODE);
    WRITE_DATA(8, GLsizei, n);
    crMemcpy(data_ptr + 12, programs, n * sizeof(*programs));
    WRITE_NETWORK_POINTER(12 + n * sizeof(*programs),   (void *) residences);
    WRITE_NETWORK_POINTER(20 + n * sizeof(*programs), (void *) writeback);
    WRITE_OPCODE(pc, CR_EXTEND_OPCODE);
    CR_CMDBLOCK_CHECK_FLUSH(pc);
    CR_UNLOCK_PACKER_CONTEXT(pc);
}

开发者ID:svn2github，项目名称:virtualbox，代码行数:28，代码来源:pack_program.c

示例8: crPackPolygonStipple

void PACK_APIENTRY crPackPolygonStipple( const GLubyte *mask )
{
    CR_GET_PACKER_CONTEXT(pc);
    unsigned char *data_ptr;
    int nodata = crStateIsBufferBound(GL_PIXEL_UNPACK_BUFFER_ARB);
    int packet_length = sizeof(int);

    if (nodata)
        packet_length += sizeof(GLint);
    else
        packet_length += 32*32/8;

    CR_GET_BUFFERED_POINTER(pc, packet_length );
    WRITE_DATA_AI(int, nodata);
    if (nodata)
    {
        WRITE_DATA_AI(GLint, (GLint)(uintptr_t)mask);
    }
    else
    {
       crMemcpy( data_ptr, mask, 32*32/8 );
    }
    WRITE_OPCODE( pc, CR_POLYGONSTIPPLE_OPCODE );
    CR_UNLOCK_PACKER_CONTEXT(pc);
}

开发者ID:MadHacker217，项目名称:VirtualBox-OSE，代码行数:25，代码来源:pack_stipple.c

示例9: crPackCombinerParameterivNV

void PACK_APIENTRY crPackCombinerParameterivNV( GLenum pname, const GLint *params )
{
    /* floats and ints are the same size, so the packing should be the same */
    CR_GET_PACKER_CONTEXT(pc);
    if (__handleCombinerParameterData( pname, (const GLfloat *) params, CR_COMBINERPARAMETERIVNV_EXTEND_OPCODE ))
        WRITE_OPCODE( pc, CR_EXTEND_OPCODE );
    CR_UNLOCK_PACKER_CONTEXT(pc);
}

开发者ID:MadHacker217，项目名称:VirtualBox-OSE，代码行数:8，代码来源:pack_regcombiner.c

示例10: crPackFree

void crPackFree( void *packet )
{
	CR_GET_PACKER_CONTEXT(pc);
    
	if ( IS_BUFFERED( packet ) )
    {
        CR_UNLOCK_PACKER_CONTEXT(pc);
		return;
    }

    CR_UNLOCK_PACKER_CONTEXT(pc);
	
	/* the pointer passed in doesn't include the space for the single
	 * opcode (4 bytes because of the alignment requirement) or the
	 * length field or the header */
	crFree( (unsigned char *) packet - 8 - sizeof(CRMessageOpcodes) );
}

开发者ID:LastRitter，项目名称:vbox-haiku，代码行数:17，代码来源:pack_buffer.c

示例11: crPackLightivSWAP

void PACK_APIENTRY crPackLightivSWAP (GLenum light, GLenum pname, const GLint *params)
{
    /* floats and ints are the same size, so the packing should be the same */
    CR_GET_PACKER_CONTEXT(pc);
    if (__handleLightData( light, pname, (const GLfloat *) params ))
        WRITE_OPCODE( pc, CR_LIGHTIV_OPCODE );
    CR_UNLOCK_PACKER_CONTEXT(pc);
}

开发者ID:bayasist，项目名称:vbox，代码行数:8，代码来源:pack_lights_swap.c

示例12: crPackAppendBuffer

void crPackAppendBuffer( const CRPackBuffer *src )
{
	CR_GET_PACKER_CONTEXT(pc);
	const int num_data = crPackNumData(src);
	const int num_opcode = crPackNumOpcodes(src);

	CRASSERT(num_data >= 0);
	CRASSERT(num_opcode >= 0);

    CR_LOCK_PACKER_CONTEXT(pc);

	/* don't append onto ourself! */
	CRASSERT(pc->currentBuffer);
	CRASSERT(pc->currentBuffer != src);

	if (!crPackCanHoldBuffer(src))
	{
		if (src->holds_BeginEnd)
		{
			crWarning( "crPackAppendBuffer: overflowed the destination!" );
            CR_UNLOCK_PACKER_CONTEXT(pc);
			return;
		}
		else
        {
			crError( "crPackAppendBuffer: overflowed the destination!" );
            CR_UNLOCK_PACKER_CONTEXT(pc);
        }
	}

	/* Copy the buffer data/operands which are at the head of the buffer */
	crMemcpy( pc->buffer.data_current, src->data_start, num_data );
	pc->buffer.data_current += num_data;

	/* Copy the buffer opcodes which are at the tail of the buffer */
	CRASSERT( pc->buffer.opcode_current - num_opcode >= pc->buffer.opcode_end );
	crMemcpy( pc->buffer.opcode_current + 1 - num_opcode, src->opcode_current + 1,
			num_opcode );
	pc->buffer.opcode_current -= num_opcode;
	pc->buffer.holds_BeginEnd |= src->holds_BeginEnd;
	pc->buffer.in_BeginEnd = src->in_BeginEnd;
	pc->buffer.holds_List |= src->holds_List;
    CR_UNLOCK_PACKER_CONTEXT(pc);
}

开发者ID:LastRitter，项目名称:vbox-haiku，代码行数:44，代码来源:pack_buffer.c

示例13: crPackAppendBoundedBuffer

void
crPackAppendBoundedBuffer( const CRPackBuffer *src, const CRrecti *bounds )
{
	CR_GET_PACKER_CONTEXT(pc);
	const GLbyte *payload = (const GLbyte *) src->opcode_current + 1;
	const int num_opcodes = crPackNumOpcodes(src);
	const int length = src->data_current - src->opcode_current - 1;

	CRASSERT(pc);
    CR_LOCK_PACKER_CONTEXT(pc);
	CRASSERT(pc->currentBuffer);
	CRASSERT(pc->currentBuffer != src);

	/*
	 * payload points to the block of opcodes immediately followed by operands.
	 */

	if ( !crPackCanHoldBoundedBuffer( src ) )
	{
		if (src->holds_BeginEnd)
		{
			crWarning( "crPackAppendBoundedBuffer: overflowed the destination!" );
            CR_UNLOCK_PACKER_CONTEXT(pc);
			return;
		}
		else
        {
			crError( "crPackAppendBoundedBuffer: overflowed the destination!" );
            CR_UNLOCK_PACKER_CONTEXT(pc);
        }
	}

	if (pc->swapping)
		crPackBoundsInfoCRSWAP( bounds, payload, length, num_opcodes );
	else
		crPackBoundsInfoCR( bounds, payload, length, num_opcodes );

	pc->buffer.holds_BeginEnd |= src->holds_BeginEnd;
	pc->buffer.in_BeginEnd = src->in_BeginEnd;
	pc->buffer.holds_List |= src->holds_List;
    CR_UNLOCK_PACKER_CONTEXT(pc);
}

开发者ID:LastRitter，项目名称:vbox-haiku，代码行数:42，代码来源:pack_buffer.c

示例14: crPackCanHoldBuffer

int crPackCanHoldBuffer( const CRPackBuffer *src )
{
	const int num_data = crPackNumData(src);
	const int num_opcode = crPackNumOpcodes(src);
    int res;
	CR_GET_PACKER_CONTEXT(pc);
    CR_LOCK_PACKER_CONTEXT(pc);
	res = crPackCanHoldOpcode( pc, num_opcode, num_data );
    CR_UNLOCK_PACKER_CONTEXT(pc);
    return res;
}

开发者ID:LastRitter，项目名称:vbox-haiku，代码行数:11，代码来源:pack_buffer.c

示例15: crPackEndListSWAP

void PACK_APIENTRY crPackEndListSWAP( void )
{
    CR_GET_PACKER_CONTEXT(pc);
    unsigned char *data_ptr;
    (void) pc;
    CR_GET_BUFFERED_POINTER( pc, 8 );
    WRITE_DATA( 0, GLint, SWAP32(8) );
    WRITE_DATA( 4, GLenum, SWAP32(CR_ENDLIST_EXTEND_OPCODE) );
    WRITE_OPCODE( pc, CR_EXTEND_OPCODE );
    pc->buffer.in_List = GL_FALSE;
    CR_UNLOCK_PACKER_CONTEXT(pc);
}

开发者ID:MadHacker217，项目名称:VirtualBox-OSE，代码行数:12，代码来源:pack_swap_lists.c

示例16: crPackEdgeFlagPointer

void PACK_APIENTRY crPackEdgeFlagPointer( GLsizei stride, const GLvoid *pointer )
{
	CR_GET_PACKER_CONTEXT(pc);
	unsigned char *data_ptr;
	int packet_length = 16;
	CR_GET_BUFFERED_POINTER( pc, packet_length );
	WRITE_DATA( 0, GLint, packet_length );
	WRITE_DATA( 4, GLenum, CR_EDGEFLAGPOINTER_EXTEND_OPCODE );
	WRITE_DATA( 8, GLsizei, stride );
	WRITE_DATA( 12, GLuint, (GLuint) ((uintptr_t) pointer) );
	WRITE_OPCODE( pc, CR_EXTEND_OPCODE );
    CR_UNLOCK_PACKER_CONTEXT(pc);
}

开发者ID:MadHacker217，项目名称:VirtualBox-OSE，代码行数:13，代码来源:pack_arrays.c

示例17: crPackDrawBuffers

void PACK_APIENTRY crPackDrawBuffers(GLsizei n, const GLenum *bufs)
{
    CR_GET_PACKER_CONTEXT(pc);
    unsigned char *data_ptr;
    int packet_length = sizeof(int)+sizeof(GLenum)+sizeof(n) + n*sizeof(*bufs);

    CR_GET_BUFFERED_POINTER(pc, packet_length);
    WRITE_DATA_AI(int, packet_length);
    WRITE_DATA_AI(GLenum, CR_DRAWBUFFERS_EXTEND_OPCODE);
    WRITE_DATA_AI(GLsizei, n);
    crMemcpy(data_ptr, bufs, n*sizeof(*bufs));
    WRITE_OPCODE(pc, CR_EXTEND_OPCODE);
    CR_UNLOCK_PACKER_CONTEXT(pc);
}

开发者ID:MadHacker217，项目名称:VirtualBox-OSE，代码行数:14，代码来源:pack_shaders.c

示例18: crPackInterleavedArrays

void PACK_APIENTRY crPackInterleavedArrays( GLenum format, GLsizei stride, const GLvoid *pointer )
{
	CR_GET_PACKER_CONTEXT(pc);
	unsigned char *data_ptr;
	int packet_length = 20;
	CR_GET_BUFFERED_POINTER( pc, packet_length );
	WRITE_DATA( 0, GLint, packet_length );
	WRITE_DATA( 4, GLenum, CR_INTERLEAVEDARRAYS_EXTEND_OPCODE );
	WRITE_DATA( 8, GLenum, format );
	WRITE_DATA( 12, GLsizei, stride );
	WRITE_DATA( 16, GLuint, (GLuint) ((uintptr_t) pointer) );
	WRITE_OPCODE( pc, CR_EXTEND_OPCODE );
    CR_UNLOCK_PACKER_CONTEXT(pc);
}

开发者ID:MadHacker217，项目名称:VirtualBox-OSE，代码行数:14，代码来源:pack_arrays.c

示例19: crPackFogCoordPointerEXT

void PACK_APIENTRY crPackFogCoordPointerEXT( GLenum type, GLsizei stride, const GLvoid * pointer )
{
	CR_GET_PACKER_CONTEXT(pc);
	unsigned char *data_ptr;
	int packet_length = 20;
	CR_GET_BUFFERED_POINTER( pc, packet_length );
	WRITE_DATA( 0, GLint, packet_length );
	WRITE_DATA( 4, GLenum, CR_FOGCOORDPOINTEREXT_EXTEND_OPCODE );
	WRITE_DATA( 8, GLenum, type );
	WRITE_DATA( 12, GLsizei, stride );
	WRITE_DATA( 16, GLuint, (GLuint) ((uintptr_t) pointer) );
	WRITE_OPCODE( pc, CR_EXTEND_OPCODE );
    CR_UNLOCK_PACKER_CONTEXT(pc);
}

开发者ID:MadHacker217，项目名称:VirtualBox-OSE，代码行数:14，代码来源:pack_arrays.c

示例20: crPackReadPixels

void PACK_APIENTRY crPackReadPixels(GLint x, GLint y, GLsizei width, 
                                    GLsizei height, GLenum format,
                                    GLenum type, GLvoid *pixels,
                                    const CRPixelPackState *packstate,
                                    int *writeback)
{
    CR_GET_PACKER_CONTEXT(pc);
    unsigned char *data_ptr;
    GLint stride = 0;
    GLint bytes_per_row;
    int bytes_per_pixel;
    *writeback = 0;

    bytes_per_pixel = crPixelSize(format, type);
    if (bytes_per_pixel <= 0) {
        char string[80];
        sprintf(string, "crPackReadPixels(format 0x%x or type 0x%x)", format, type);
        __PackError(__LINE__, __FILE__, GL_INVALID_ENUM, string);
        return;
    }

    /* default bytes_per_row so crserver can allocate memory */
    bytes_per_row = width * bytes_per_pixel;

    stride = bytes_per_row;
    if (packstate->alignment != 1) {
         GLint remainder = bytes_per_row % packstate->alignment;
         if (remainder)
                stride = bytes_per_row + (packstate->alignment - remainder);
    }

    CR_GET_BUFFERED_POINTER(pc, 48 + sizeof(CRNetworkPointer) );
    WRITE_DATA( 0,  GLint,  x );
    WRITE_DATA( 4,  GLint,  y );
    WRITE_DATA( 8,  GLsizei,  width );
    WRITE_DATA( 12, GLsizei,  height );
    WRITE_DATA( 16, GLenum, format );
    WRITE_DATA( 20, GLenum, type );
    WRITE_DATA( 24, GLint,  stride ); /* XXX not really used! */
    WRITE_DATA( 28, GLint, packstate->alignment );
    WRITE_DATA( 32, GLint, packstate->skipRows );
    WRITE_DATA( 36, GLint, packstate->skipPixels );
    WRITE_DATA( 40, GLint, bytes_per_row );
    WRITE_DATA( 44, GLint, packstate->rowLength );
    WRITE_NETWORK_POINTER( 48, (char *) pixels );
    WRITE_OPCODE( pc, CR_READPIXELS_OPCODE );
    CR_CMDBLOCK_CHECK_FLUSH(pc);
    CR_UNLOCK_PACKER_CONTEXT(pc);
}

开发者ID:gvsurenderreddy，项目名称:virtualbox，代码行数:49，代码来源:pack_pixels.c

注：本文中的CR_UNLOCK_PACKER_CONTEXT函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ CRect函数代码示例发布时间：2022-05-30

C++ CR_RESERVED函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18323|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9698|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8193|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8559|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8469|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9410|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8443|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7875|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8427|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7403|2022-11-06

客服电话

电子邮件

C++ CR_UNLOCK_PACKER_CONTEXT函数代码示例

示例1: crPackLoadTransposeMatrixfARB

示例2: crPackLightfvSWAP

示例3: crPackCombinerParameterfvNV

示例4: crPackLoadMatrixf

示例5: crPackMultMatrixd

示例6: crPackWindowVisibleRegion

示例7: crPackAreProgramsResidentNV

示例8: crPackPolygonStipple

示例9: crPackCombinerParameterivNV

示例10: crPackFree

示例11: crPackLightivSWAP

示例12: crPackAppendBuffer

示例13: crPackAppendBoundedBuffer

示例14: crPackCanHoldBuffer

示例15: crPackEndListSWAP

示例16: crPackEdgeFlagPointer

示例17: crPackDrawBuffers

示例18: crPackInterleavedArrays

示例19: crPackFogCoordPointerEXT

示例20: crPackReadPixels

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-35285

万里平台泰州会场

kojino/Harvard-Robust-Machine-Learning:

cescoffier/puppet-nexus: A Puppet Module

文的笔顺,诠释文的笔画,解读文的部首

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053