本文整理汇总了C++中CVMX_GMXX_PRTX_CFG函数的典型用法代码示例。如果您正苦于以下问题：C++ CVMX_GMXX_PRTX_CFG函数的具体用法？C++ CVMX_GMXX_PRTX_CFG怎么用？C++ CVMX_GMXX_PRTX_CFG使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了CVMX_GMXX_PRTX_CFG函数的14个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: cvm_oct_sgmii_open
int cvm_oct_sgmii_open(struct net_device *dev)
{
union cvmx_gmxx_prtx_cfg gmx_cfg;
struct octeon_ethernet *priv = netdev_priv(dev);
cvmx_helper_link_info_t link_info;
int rv;
rv = cvm_oct_phy_setup_device(dev);
if (rv)
return rv;
gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(priv->interface_port, priv->interface));
gmx_cfg.s.en = 1;
cvmx_write_csr(CVMX_GMXX_PRTX_CFG(priv->interface_port, priv->interface), gmx_cfg.u64);
if (octeon_is_simulation())
return 0;
if (priv->phydev) {
int r = phy_read_status(priv->phydev);
if (r == 0 && priv->phydev->link == 0)
netif_carrier_off(dev);
cvm_oct_adjust_link(dev);
} else {
link_info = cvmx_helper_link_get(priv->ipd_port);
if (!link_info.s.link_up)
netif_carrier_off(dev);
priv->poll = cvm_oct_sgmii_poll;
cvm_oct_sgmii_poll(dev);
}
return 0;
}
开发者ID:yuri-tolstov，项目名称:projects，代码行数:32，代码来源:ethernet-sgmii.c
示例2: __cvmx_helper_sgmii_hardware_init_one_time
/**
* Perform initialization required only once for an SGMII port.
*
* @interface: Interface to init
* @index: Index of prot on the interface
*
* Returns Zero on success, negative on failure
*/
static int __cvmx_helper_sgmii_hardware_init_one_time(int interface, int index)
{
const uint64_t clock_mhz = cvmx_sysinfo_get()->cpu_clock_hz / 1000000;
union cvmx_pcsx_miscx_ctl_reg pcs_misc_ctl_reg;
union cvmx_pcsx_linkx_timer_count_reg pcsx_linkx_timer_count_reg;
union cvmx_gmxx_prtx_cfg gmxx_prtx_cfg;
/* Disable GMX */
gmxx_prtx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
gmxx_prtx_cfg.s.en = 0;
cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmxx_prtx_cfg.u64);
/*
* Write PCS*_LINK*_TIMER_COUNT_REG[COUNT] with the
* appropriate value. 1000BASE-X specifies a 10ms
* interval. SGMII specifies a 1.6ms interval.
*/
pcs_misc_ctl_reg.u64 =
cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface));
pcsx_linkx_timer_count_reg.u64 =
cvmx_read_csr(CVMX_PCSX_LINKX_TIMER_COUNT_REG(index, interface));
if (pcs_misc_ctl_reg.s.mode) {
/* 1000BASE-X */
pcsx_linkx_timer_count_reg.s.count =
(10000ull * clock_mhz) >> 10;
} else {
开发者ID:119-org，项目名称:hi3518-osdrv，代码行数:34，代码来源:cvmx-helper-sgmii.c
示例3: __cvmx_helper_rgmii_configure_loopback
/**
* Configure a port for internal and/or external loopback. Internal loopback
* causes packets sent by the port to be received by Octeon. External loopback
* causes packets received from the wire to sent out again.
*
* @ipd_port: IPD/PKO port to loopback.
* @enable_internal:
* Non zero if you want internal loopback
* @enable_external:
* Non zero if you want external loopback
*
* Returns Zero on success, negative on failure.
*/
int __cvmx_helper_rgmii_configure_loopback(int ipd_port, int enable_internal,
int enable_external)
{
int interface = cvmx_helper_get_interface_num(ipd_port);
int index = cvmx_helper_get_interface_index_num(ipd_port);
int original_enable;
union cvmx_gmxx_prtx_cfg gmx_cfg;
union cvmx_asxx_prt_loop asxx_prt_loop;
/* Read the current enable state and save it */
gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
original_enable = gmx_cfg.s.en;
/* Force port to be disabled */
gmx_cfg.s.en = 0;
if (enable_internal) {
/* Force speed if we're doing internal loopback */
gmx_cfg.s.duplex = 1;
gmx_cfg.s.slottime = 1;
gmx_cfg.s.speed = 1;
cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 1);
cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x200);
cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0x2000);
}
cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64);
/* Set the loopback bits */
asxx_prt_loop.u64 = cvmx_read_csr(CVMX_ASXX_PRT_LOOP(interface));
if (enable_internal)
asxx_prt_loop.s.int_loop |= 1 << index;
else
asxx_prt_loop.s.int_loop &= ~(1 << index);
if (enable_external)
asxx_prt_loop.s.ext_loop |= 1 << index;
else
asxx_prt_loop.s.ext_loop &= ~(1 << index);
cvmx_write_csr(CVMX_ASXX_PRT_LOOP(interface), asxx_prt_loop.u64);
/* Force enables in internal loopback */
if (enable_internal) {
uint64_t tmp;
tmp = cvmx_read_csr(CVMX_ASXX_TX_PRT_EN(interface));
cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(interface),
(1 << index) | tmp);
tmp = cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(interface));
cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface),
(1 << index) | tmp);
original_enable = 1;
}
/* Restore the enable state */
gmx_cfg.s.en = original_enable;
cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64);
return 0;
}
开发者ID:mikuhatsune001，项目名称:linux2.6.32，代码行数:67，代码来源:cvmx-helper-rgmii.c
示例4: cvm_oct_rgmii_stop
int cvm_oct_rgmii_stop(struct net_device *dev)
{
union cvmx_gmxx_prtx_cfg gmx_cfg;
struct octeon_ethernet *priv = netdev_priv(dev);
int interface = INTERFACE(priv->port);
int index = INDEX(priv->port);
gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
gmx_cfg.s.en = 0;
cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64);
return 0;
}
开发者ID:AsadRaza，项目名称:OCTEON-Linux，代码行数:12，代码来源:ethernet-rgmii.c
示例5: cvm_oct_common_set_multicast_list
/**
* cvm_oct_common_set_multicast_list - set the multicast list
* @dev: Device to work on
*/
static void cvm_oct_common_set_multicast_list(struct net_device *dev)
{
union cvmx_gmxx_prtx_cfg gmx_cfg;
struct octeon_ethernet *priv = netdev_priv(dev);
int interface = INTERFACE(priv->port);
int index = INDEX(priv->port);
if ((interface < 2) &&
(cvmx_helper_interface_get_mode(interface) !=
CVMX_HELPER_INTERFACE_MODE_SPI)) {
union cvmx_gmxx_rxx_adr_ctl control;
control.u64 = 0;
control.s.bcst = 1; /* Allow broadcast MAC addresses */
if (!netdev_mc_empty(dev) || (dev->flags & IFF_ALLMULTI) ||
(dev->flags & IFF_PROMISC))
/* Force accept multicast packets */
control.s.mcst = 2;
else
/* Force reject multicast packets */
control.s.mcst = 1;
if (dev->flags & IFF_PROMISC)
/*
* Reject matches if promisc. Since CAM is
* shut off, should accept everything.
*/
control.s.cam_mode = 0;
else
/* Filter packets based on the CAM */
control.s.cam_mode = 1;
gmx_cfg.u64 =
cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface),
gmx_cfg.u64 & ~1ull);
cvmx_write_csr(CVMX_GMXX_RXX_ADR_CTL(index, interface),
control.u64);
if (dev->flags & IFF_PROMISC)
cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM_EN
(index, interface), 0);
else
cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM_EN
(index, interface), 1);
cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface),
gmx_cfg.u64);
}
}
开发者ID:020gzh，项目名称:linux，代码行数:55，代码来源:ethernet.c
示例6: cvm_oct_xaui_open
int cvm_oct_xaui_open(struct net_device *dev)
{
union cvmx_gmxx_prtx_cfg gmx_cfg;
struct octeon_ethernet *priv = netdev_priv(dev);
int interface = INTERFACE(priv->port);
int index = INDEX(priv->port);
cvmx_helper_link_info_t link_info;
gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
gmx_cfg.s.en = 1;
cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64);
if (!octeon_is_simulation()) {
link_info = cvmx_helper_link_get(priv->port);
if (!link_info.s.link_up)
netif_carrier_off(dev);
}
return 0;
}
开发者ID:303750856，项目名称:linux-3.1，代码行数:19，代码来源:ethernet-xaui.c
示例7: cvm_oct_common_set_mac_address
/**
* cvm_oct_common_set_mac_address - set the hardware MAC address for a device
* @dev: The device in question.
* @addr: Address structure to change it too.
* Returns Zero on success
*/
static int cvm_oct_common_set_mac_address(struct net_device *dev, void *addr)
{
struct octeon_ethernet *priv = netdev_priv(dev);
union cvmx_gmxx_prtx_cfg gmx_cfg;
int interface = INTERFACE(priv->port);
int index = INDEX(priv->port);
memcpy(dev->dev_addr, addr + 2, 6);
if ((interface < 2)
&& (cvmx_helper_interface_get_mode(interface) !=
CVMX_HELPER_INTERFACE_MODE_SPI)) {
int i;
uint8_t *ptr = addr;
uint64_t mac = 0;
for (i = 0; i < 6; i++)
mac = (mac << 8) | (uint64_t) (ptr[i + 2]);
gmx_cfg.u64 =
cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface),
gmx_cfg.u64 & ~1ull);
cvmx_write_csr(CVMX_GMXX_SMACX(index, interface), mac);
cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM0(index, interface),
ptr[2]);
cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM1(index, interface),
ptr[3]);
cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM2(index, interface),
ptr[4]);
cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM3(index, interface),
ptr[5]);
cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM4(index, interface),
ptr[6]);
cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM5(index, interface),
ptr[7]);
cvm_oct_common_set_multicast_list(dev);
cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface),
gmx_cfg.u64);
}
return 0;
}
开发者ID:12rafael，项目名称:jellytimekernel，代码行数:49，代码来源:ethernet.c
示例8: cvm_oct_common_open
int cvm_oct_common_open(struct net_device *dev,
void (*link_poll)(struct net_device *))
{
union cvmx_gmxx_prtx_cfg gmx_cfg;
struct octeon_ethernet *priv = netdev_priv(dev);
int interface = INTERFACE(priv->port);
int index = INDEX(priv->port);
cvmx_helper_link_info_t link_info;
int rv;
rv = cvm_oct_phy_setup_device(dev);
if (rv)
return rv;
gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
gmx_cfg.s.en = 1;
if (octeon_has_feature(OCTEON_FEATURE_PKND))
gmx_cfg.s.pknd = priv->port;
cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64);
if (octeon_is_simulation())
return 0;
if (dev->phydev) {
int r = phy_read_status(dev->phydev);
if (r == 0 && dev->phydev->link == 0)
netif_carrier_off(dev);
cvm_oct_adjust_link(dev);
} else {
link_info = cvmx_helper_link_get(priv->port);
if (!link_info.s.link_up)
netif_carrier_off(dev);
priv->poll = link_poll;
link_poll(dev);
}
return 0;
}
开发者ID:AlexShiLucky，项目名称:linux，代码行数:39，代码来源:ethernet.c
示例9: cvm_oct_sgmii_stop
int cvm_oct_sgmii_stop(struct net_device *dev)
{
union cvmx_gmxx_prtx_cfg gmx_cfg;
struct octeon_ethernet *priv = netdev_priv(dev);
cvmx_helper_link_info_t link_info;
gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(priv->interface_port, priv->interface));
gmx_cfg.s.en = 0;
cvmx_write_csr(CVMX_GMXX_PRTX_CFG(priv->interface_port, priv->interface), gmx_cfg.u64);
priv->poll = NULL;
if (priv->phydev) {
phy_disconnect(priv->phydev);
}
priv->phydev = NULL;
if (priv->last_link) {
link_info.u64 = 0;
priv->last_link = 0;
cvmx_helper_link_set(priv->ipd_port, link_info);
}
return 0;
}
开发者ID:yuri-tolstov，项目名称:projects，代码行数:23，代码来源:ethernet-sgmii.c
示例10: cvmx_helper_rgmii_internal_loopback
/**
* Put an RGMII interface in loopback mode. Internal packets sent
* out will be received back again on the same port. Externally
* received packets will echo back out.
*
* @param port IPD port number to loop.
*/
void cvmx_helper_rgmii_internal_loopback(int port)
{
int interface = (port >> 4) & 1;
int index = port & 0xf;
uint64_t tmp;
cvmx_gmxx_prtx_cfg_t gmx_cfg;
gmx_cfg.u64 = 0;
gmx_cfg.s.duplex = 1;
gmx_cfg.s.slottime = 1;
gmx_cfg.s.speed = 1;
cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 1);
cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x200);
cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0x2000);
cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64);
tmp = cvmx_read_csr(CVMX_ASXX_PRT_LOOP(interface));
cvmx_write_csr(CVMX_ASXX_PRT_LOOP(interface), (1 << index) | tmp);
tmp = cvmx_read_csr(CVMX_ASXX_TX_PRT_EN(interface));
cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(interface), (1 << index) | tmp);
tmp = cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(interface));
cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface), (1 << index) | tmp);
gmx_cfg.s.en = 1;
cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64);
}
开发者ID:2asoft，项目名称:freebsd，代码行数:31，代码来源:cvmx-helper-rgmii.c
示例11: cvm_oct_xmit
/**
* Packet transmit
*
* @param m Packet to send
* @param dev Device info structure
* @return Always returns zero
*/
int cvm_oct_xmit(struct mbuf *m, struct ifnet *ifp)
{
cvmx_pko_command_word0_t pko_command;
cvmx_buf_ptr_t hw_buffer;
int dropped;
int qos;
cvm_oct_private_t *priv = (cvm_oct_private_t *)ifp->if_softc;
int32_t in_use;
int32_t buffers_to_free;
cvmx_wqe_t *work;
/* Prefetch the private data structure.
It is larger that one cache line */
CVMX_PREFETCH(priv, 0);
/* Start off assuming no drop */
dropped = 0;
/* The check on CVMX_PKO_QUEUES_PER_PORT_* is designed to completely
remove "qos" in the event neither interface supports multiple queues
per port */
if ((CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 > 1) ||
(CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 > 1)) {
qos = GET_MBUF_QOS(m);
if (qos <= 0)
qos = 0;
else if (qos >= cvmx_pko_get_num_queues(priv->port))
qos = 0;
} else
qos = 0;
/* The CN3XXX series of parts has an errata (GMX-401) which causes the
GMX block to hang if a collision occurs towards the end of a
<68 byte packet. As a workaround for this, we pad packets to be
68 bytes whenever we are in half duplex mode. We don't handle
the case of having a small packet but no room to add the padding.
The kernel should always give us at least a cache line */
if (__predict_false(m->m_pkthdr.len < 64) && OCTEON_IS_MODEL(OCTEON_CN3XXX)) {
cvmx_gmxx_prtx_cfg_t gmx_prt_cfg;
int interface = INTERFACE(priv->port);
int index = INDEX(priv->port);
if (interface < 2) {
/* We only need to pad packet in half duplex mode */
gmx_prt_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
if (gmx_prt_cfg.s.duplex == 0) {
static uint8_t pad[64];
if (!m_append(m, sizeof pad - m->m_pkthdr.len, pad))
printf("%s: unable to padd small packet.", __func__);
}
}
}
#ifdef OCTEON_VENDOR_RADISYS
/*
* The RSYS4GBE will hang if asked to transmit a packet less than 60 bytes.
*/
if (__predict_false(m->m_pkthdr.len < 60) &&
cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_CUST_RADISYS_RSYS4GBE) {
static uint8_t pad[60];
if (!m_append(m, sizeof pad - m->m_pkthdr.len, pad))
printf("%s: unable to pad small packet.", __func__);
}
#endif
/*
* If the packet is not fragmented.
*/
if (m->m_pkthdr.len == m->m_len) {
/* Build the PKO buffer pointer */
hw_buffer.u64 = 0;
hw_buffer.s.addr = cvmx_ptr_to_phys(m->m_data);
hw_buffer.s.pool = 0;
hw_buffer.s.size = m->m_len;
/* Build the PKO command */
pko_command.u64 = 0;
pko_command.s.segs = 1;
pko_command.s.dontfree = 1; /* Do not put this buffer into the FPA. */
work = NULL;
} else {
struct mbuf *n;
unsigned segs;
uint64_t *gp;
/*
* The packet is fragmented, we need to send a list of segments
* in memory we borrow from the WQE pool.
*/
work = cvmx_fpa_alloc(CVMX_FPA_WQE_POOL);
//.........这里部分代码省略.........
开发者ID:2trill2spill，项目名称:freebsd，代码行数:101，代码来源:ethernet-tx.c
示例12: __cvmx_helper_rgmii_enable
/**
* Configure all of the ASX, GMX, and PKO regsiters required
* to get RGMII to function on the supplied interface.
*
* @interface: PKO Interface to configure (0 or 1)
*
* Returns Zero on success
*/
int __cvmx_helper_rgmii_enable(int interface)
{
int num_ports = cvmx_helper_ports_on_interface(interface);
int port;
struct cvmx_sysinfo *sys_info_ptr = cvmx_sysinfo_get();
union cvmx_gmxx_inf_mode mode;
union cvmx_asxx_tx_prt_en asx_tx;
union cvmx_asxx_rx_prt_en asx_rx;
mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));
if (mode.s.en == 0)
return -1;
if ((OCTEON_IS_MODEL(OCTEON_CN38XX) ||
OCTEON_IS_MODEL(OCTEON_CN58XX)) && mode.s.type == 1)
/* Ignore SPI interfaces */
return -1;
/* Configure the ASX registers needed to use the RGMII ports */
asx_tx.u64 = 0;
asx_tx.s.prt_en = cvmx_build_mask(num_ports);
cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(interface), asx_tx.u64);
asx_rx.u64 = 0;
asx_rx.s.prt_en = cvmx_build_mask(num_ports);
cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface), asx_rx.u64);
/* Configure the GMX registers needed to use the RGMII ports */
for (port = 0; port < num_ports; port++) {
/* Setting of CVMX_GMXX_TXX_THRESH has been moved to
__cvmx_helper_setup_gmx() */
if (cvmx_octeon_is_pass1())
__cvmx_helper_errata_asx_pass1(interface, port,
sys_info_ptr->
cpu_clock_hz);
else {
/*
* Configure more flexible RGMII preamble
* checking. Pass 1 doesn't support this
* feature.
*/
union cvmx_gmxx_rxx_frm_ctl frm_ctl;
frm_ctl.u64 =
cvmx_read_csr(CVMX_GMXX_RXX_FRM_CTL
(port, interface));
/* New field, so must be compile time */
frm_ctl.s.pre_free = 1;
cvmx_write_csr(CVMX_GMXX_RXX_FRM_CTL(port, interface),
frm_ctl.u64);
}
/*
* Each pause frame transmitted will ask for about 10M
* bit times before resume. If buffer space comes
* available before that time has expired, an XON
* pause frame (0 time) will be transmitted to restart
* the flow.
*/
cvmx_write_csr(CVMX_GMXX_TXX_PAUSE_PKT_TIME(port, interface),
20000);
cvmx_write_csr(CVMX_GMXX_TXX_PAUSE_PKT_INTERVAL
(port, interface), 19000);
if (OCTEON_IS_MODEL(OCTEON_CN50XX)) {
cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(port, interface),
16);
cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(port, interface),
16);
} else {
cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(port, interface),
24);
cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(port, interface),
24);
}
}
__cvmx_helper_setup_gmx(interface, num_ports);
/* enable the ports now */
for (port = 0; port < num_ports; port++) {
union cvmx_gmxx_prtx_cfg gmx_cfg;
cvmx_helper_link_autoconf(cvmx_helper_get_ipd_port
(interface, port));
gmx_cfg.u64 =
cvmx_read_csr(CVMX_GMXX_PRTX_CFG(port, interface));
gmx_cfg.s.en = 1;
cvmx_write_csr(CVMX_GMXX_PRTX_CFG(port, interface),
gmx_cfg.u64);
}
__cvmx_interrupt_asxx_enable(interface);
__cvmx_interrupt_gmxx_enable(interface);
//.........这里部分代码省略.........
开发者ID:mikuhatsune001，项目名称:linux2.6.32，代码行数:101，代码来源:cvmx-helper-rgmii.c
示例13: __cvmx_helper_rgmii_enable
//.........这里部分代码省略.........
*
* @return Zero on success
*/
int __cvmx_helper_rgmii_enable(int interface)
{
int num_ports = cvmx_helper_ports_on_interface(interface);
int port;
cvmx_gmxx_inf_mode_t mode;
cvmx_asxx_tx_prt_en_t asx_tx;
cvmx_asxx_rx_prt_en_t asx_rx;
mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));
if (mode.s.en == 0)
return -1;
if ((OCTEON_IS_MODEL(OCTEON_CN38XX) || OCTEON_IS_MODEL(OCTEON_CN58XX)) && mode.s.type == 1) /* Ignore SPI interfaces */
return -1;
/* Configure the ASX registers needed to use the RGMII ports */
asx_tx.u64 = 0;
asx_tx.s.prt_en = cvmx_build_mask(num_ports);
cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(interface), asx_tx.u64);
asx_rx.u64 = 0;
asx_rx.s.prt_en = cvmx_build_mask(num_ports);
cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface), asx_rx.u64);
/* Configure the GMX registers needed to use the RGMII ports */
for (port=0; port<num_ports; port++)
{
/* Setting of CVMX_GMXX_TXX_THRESH has been moved to
__cvmx_helper_setup_gmx() */
/* Configure more flexible RGMII preamble checking. Pass 1 doesn't
support this feature. */
cvmx_gmxx_rxx_frm_ctl_t frm_ctl;
frm_ctl.u64 = cvmx_read_csr(CVMX_GMXX_RXX_FRM_CTL(port, interface));
frm_ctl.s.pre_free = 1; /* New field, so must be compile time */
cvmx_write_csr(CVMX_GMXX_RXX_FRM_CTL(port, interface), frm_ctl.u64);
/* Each pause frame transmitted will ask for about 10M bit times
before resume. If buffer space comes available before that time
has expired, an XON pause frame (0 time) will be transmitted to
restart the flow. */
cvmx_write_csr(CVMX_GMXX_TXX_PAUSE_PKT_TIME(port, interface), 20000);
cvmx_write_csr(CVMX_GMXX_TXX_PAUSE_PKT_INTERVAL(port, interface), 19000);
/*
* Board types we have to know at compile-time.
*/
#if defined(OCTEON_BOARD_CAPK_0100ND)
cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(port, interface), 26);
cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(port, interface), 26);
#else
/*
* Vendor-defined board types.
*/
#if defined(OCTEON_VENDOR_LANNER)
switch (cvmx_sysinfo_get()->board_type) {
case CVMX_BOARD_TYPE_CUST_LANNER_MR320:
case CVMX_BOARD_TYPE_CUST_LANNER_MR321X:
if (port == 0) {
cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(port, interface), 4);
} else {
cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(port, interface), 7);
}
cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(port, interface), 0);
break;
}
#else
/*
* For board types we can determine at runtime.
*/
if (OCTEON_IS_MODEL(OCTEON_CN50XX))
{
cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(port, interface), 16);
cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(port, interface), 16);
}
else
{
cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(port, interface), 24);
cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(port, interface), 24);
}
#endif
#endif
}
__cvmx_helper_setup_gmx(interface, num_ports);
/* enable the ports now */
for (port=0; port<num_ports; port++)
{
cvmx_gmxx_prtx_cfg_t gmx_cfg;
cvmx_helper_link_autoconf(cvmx_helper_get_ipd_port(interface, port));
gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(port, interface));
gmx_cfg.s.en = 1;
cvmx_write_csr(CVMX_GMXX_PRTX_CFG(port, interface), gmx_cfg.u64);
}
return 0;
}
开发者ID:2asoft，项目名称:freebsd，代码行数:101，代码来源:cvmx-helper-rgmii.c
示例14: __cvmx_helper_rgmii_link_set
/**
* @INTERNAL
* Configure an IPD/PKO port for the specified link state. This
* function does not influence auto negotiation at the PHY level.
* The passed link state must always match the link state returned
* by cvmx_helper_link_get(). It is normally best to use
* cvmx_helper_link_autoconf() instead.
*
* @param ipd_port IPD/PKO port to configure
* @param link_info The new link state
*
* @return Zero on success, negative on failure
*/
int __cvmx_helper_rgmii_link_set(int ipd_port, cvmx_helper_link_info_t link_info)
{
int result = 0;
int interface = cvmx_helper_get_interface_num(ipd_port);
int index = cvmx_helper_get_interface_index_num(ipd_port);
cvmx_gmxx_prtx_cfg_t original_gmx_cfg;
cvmx_gmxx_prtx_cfg_t new_gmx_cfg;
cvmx_pko_mem_queue_qos_t pko_mem_queue_qos;
cvmx_pko_mem_queue_qos_t pko_mem_queue_qos_save[16];
cvmx_gmxx_tx_ovr_bp_t gmx_tx_ovr_bp;
cvmx_gmxx_tx_ovr_bp_t gmx_tx_ovr_bp_save;
int i;
/* Ignore speed sets in the simulator */
if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM)
return 0;
/* Read the current settings so we know the current enable state */
original_gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
new_gmx_cfg = original_gmx_cfg;
/* Disable the lowest level RX */
cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface),
cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(interface)) & ~(1<<index));
memset(pko_mem_queue_qos_save, 0, sizeof(pko_mem_queue_qos_save));
/* Disable all queues so that TX should become idle */
for (i=0; i<cvmx_pko_get_num_queues(ipd_port); i++)
{
int queue = cvmx_pko_get_base_queue(ipd_port) + i;
cvmx_write_csr(CVMX_PKO_REG_READ_IDX, queue);
pko_mem_queue_qos.u64 = cvmx_read_csr(CVMX_PKO_MEM_QUEUE_QOS);
pko_mem_queue_qos.s.pid = ipd_port;
pko_mem_queue_qos.s.qid = queue;
pko_mem_queue_qos_save[i] = pko_mem_queue_qos;
pko_mem_queue_qos.s.qos_mask = 0;
cvmx_write_csr(CVMX_PKO_MEM_QUEUE_QOS, pko_mem_queue_qos.u64);
}
/* Disable backpressure */
gmx_tx_ovr_bp.u64 = cvmx_read_csr(CVMX_GMXX_TX_OVR_BP(interface));
gmx_tx_ovr_bp_save = gmx_tx_ovr_bp;
gmx_tx_ovr_bp.s.bp &= ~(1<<index);
gmx_tx_ovr_bp.s.en |= 1<<index;
cvmx_write_csr(CVMX_GMXX_TX_OVR_BP(interface), gmx_tx_ovr_bp.u64);
cvmx_read_csr(CVMX_GMXX_TX_OVR_BP(interface));
/* Poll the GMX state machine waiting for it to become idle. Preferably we
should only change speed when it is idle. If it doesn't become idle we
will still do the speed change, but there is a slight chance that GMX
will lockup */
cvmx_write_csr(CVMX_NPI_DBG_SELECT, interface*0x800 + index*0x100 + 0x880);
CVMX_WAIT_FOR_FIELD64(CVMX_DBG_DATA, cvmx_dbg_data_t, data&7, ==, 0, 10000);
CVMX_WAIT_FOR_FIELD64(CVMX_DBG_DATA, cvmx_dbg_data_t, data&0xf, ==, 0, 10000);
/* Disable the port before we make any changes */
new_gmx_cfg.s.en = 0;
cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), new_gmx_cfg.u64);
cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
/* Set full/half duplex */
if (!link_info.s.link_up)
new_gmx_cfg.s.duplex = 1; /* Force full duplex on down links */
else
new_gmx_cfg.s.duplex = link_info.s.full_duplex;
/* Set the link speed. Anything unknown is set to 1Gbps */
if (link_info.s.speed == 10)
{
new_gmx_cfg.s.slottime = 0;
new_gmx_cfg.s.speed = 0;
}
else if (link_info.s.speed == 100)
{
new_gmx_cfg.s.slottime = 0;
new_gmx_cfg.s.speed = 0;
}
else
{
new_gmx_cfg.s.slottime = 1;
new_gmx_cfg.s.speed = 1;
}
/* Adjust the clocks */
if (link_info.s.speed == 10)
{
cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 50);
//.........这里部分代码省略.........
开发者ID:2asoft，项目名称:freebsd，代码行数:101，代码来源:cvmx-helper-rgmii.c
注：本文中的CVMX_GMXX_PRTX_CFG函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论