C++ CY_SET_REG16函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中CY_SET_REG16函数的典型用法代码示例。如果您正苦于以下问题：C++ CY_SET_REG16函数的具体用法？C++ CY_SET_REG16怎么用？C++ CY_SET_REG16使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了CY_SET_REG16函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ShiftReg_1_RestoreConfig

/*******************************************************************************
* Function Name: ShiftReg_1_RestoreConfig
********************************************************************************
*
* Summary:
*  Restores Shift Register configuration.
*
* Parameters:
*  None.
*
* Return:
*  None.
*
*******************************************************************************/
void ShiftReg_1_RestoreConfig(void) 
{
    /* Restore tha data, saved by SaveConfig()function */
    #if (CY_PSOC3_ES2 || CY_PSOC5_ES1)
        CY_SET_REG16(ShiftReg_1_SHIFT_REG_LSB_PTR, ShiftReg_1_backup.saveSrA0Reg);
            CY_SET_REG16(ShiftReg_1_SHIFT_REG_VALUE_LSB_PTR, ShiftReg_1_backup.saveSrA1Reg);
            ShiftReg_1_SR_STATUS_MASK = ShiftReg_1_backup.saveSrIntMask;
    #else
            CY_SET_REG16(ShiftReg_1_SHIFT_REG_LSB_PTR, ShiftReg_1_backup.saveSrA0Reg);
            CY_SET_REG16(ShiftReg_1_SHIFT_REG_VALUE_LSB_PTR, ShiftReg_1_backup.saveSrA1Reg);

    #endif /*(CY_PSOC3_ES2 || CY_PSOC5_ES1)*/
}

开发者ID:marcelocoelho，项目名称:Pulse-Firmware，代码行数:27，代码来源:ShiftReg_1_PM.c

示例2: Timer_3_WriteCounter

/*******************************************************************************
* Function Name: Timer_3_WriteCounter
********************************************************************************
*
* Summary:
*  This funtion is used to set the counter to a specific value
*
* Parameters:
*  counter:  New counter value.
*
* Return:
*  void
*
*******************************************************************************/
void Timer_3_WriteCounter(uint16 counter) \
                                   
{
   #if(Timer_3_UsingFixedFunction)
        /* This functionality is removed until a FixedFunction HW update to
         * allow this register to be written
         */
        CY_SET_REG16(Timer_3_COUNTER_LSB_PTR, (uint16)counter);
        
    #else
        CY_SET_REG16(Timer_3_COUNTER_LSB_PTR, counter);
    #endif /* Set Write Counter only for the UDB implementation (Write Counter not available in fixed function Timer */
}

开发者ID:proyectos1Insepet，项目名称:MUX，代码行数:27，代码来源:Timer_3.c

示例3: PWM_Counter_WriteCounter

/*******************************************************************************
* Function Name: PWM_Counter_WriteCounter
********************************************************************************
* Summary:
*   This funtion is used to set the counter to a specific value
*
* Parameters:  
*  counter:  New counter value. 
*
* Return: 
*  void 
*
*******************************************************************************/
void PWM_Counter_WriteCounter(uint16 counter) \
                                   
{
    #if(PWM_Counter_UsingFixedFunction)
        /* assert if block is already enabled */
        CYASSERT (!(PWM_Counter_GLOBAL_ENABLE & PWM_Counter_BLOCK_EN_MASK));
        /* If block is disabled, enable it and then write the counter */
        PWM_Counter_GLOBAL_ENABLE |= PWM_Counter_BLOCK_EN_MASK;
        CY_SET_REG16(PWM_Counter_COUNTER_LSB_PTR, (uint16)counter);
        PWM_Counter_GLOBAL_ENABLE &= ~PWM_Counter_BLOCK_EN_MASK;
    #else
        CY_SET_REG16(PWM_Counter_COUNTER_LSB_PTR, counter);
    #endif /* (PWM_Counter_UsingFixedFunction) */
}

开发者ID:kelime，项目名称:lab-of-cars，代码行数:27，代码来源:PWM_Counter.c

示例4: QuadDecoder_Cnt16_WriteCounter

/*******************************************************************************
* Function Name: QuadDecoder_Cnt16_WriteCounter
********************************************************************************
* Summary:
*   This funtion is used to set the counter to a specific value
*
* Parameters:  
*  counter:  New counter value. 
*
* Return: 
*  void 
*
*******************************************************************************/
void QuadDecoder_Cnt16_WriteCounter(uint16 counter) \
                                   
{
    #if(QuadDecoder_Cnt16_UsingFixedFunction)
        /* assert if block is already enabled */
        CYASSERT (0u == (QuadDecoder_Cnt16_GLOBAL_ENABLE & QuadDecoder_Cnt16_BLOCK_EN_MASK));
        /* If block is disabled, enable it and then write the counter */
        QuadDecoder_Cnt16_GLOBAL_ENABLE |= QuadDecoder_Cnt16_BLOCK_EN_MASK;
        CY_SET_REG16(QuadDecoder_Cnt16_COUNTER_LSB_PTR, (uint16)counter);
        QuadDecoder_Cnt16_GLOBAL_ENABLE &= ((uint8)(~QuadDecoder_Cnt16_BLOCK_EN_MASK));
    #else
        CY_SET_REG16(QuadDecoder_Cnt16_COUNTER_LSB_PTR, counter);
    #endif /* (QuadDecoder_Cnt16_UsingFixedFunction) */
}

开发者ID:Qmax，项目名称:PT6，代码行数:27，代码来源:QuadDecoder_Cnt16.c

示例5: Counter_1_WriteCounter

/*******************************************************************************
* Function Name: Counter_1_WriteCounter
********************************************************************************
* Summary:
*   This funtion is used to set the counter to a specific value
*
* Parameters:  
*  counter:  New counter value. 
*
* Return: 
*  void 
*
*******************************************************************************/
void Counter_1_WriteCounter(uint16 counter) \
                                   
{
    #if(Counter_1_UsingFixedFunction)
        /* assert if block is already enabled */
        CYASSERT (0u == (Counter_1_GLOBAL_ENABLE & Counter_1_BLOCK_EN_MASK));
        /* If block is disabled, enable it and then write the counter */
        Counter_1_GLOBAL_ENABLE |= Counter_1_BLOCK_EN_MASK;
        CY_SET_REG16(Counter_1_COUNTER_LSB_PTR, (uint16)counter);
        Counter_1_GLOBAL_ENABLE &= ((uint8)(~Counter_1_BLOCK_EN_MASK));
    #else
        CY_SET_REG16(Counter_1_COUNTER_LSB_PTR, counter);
    #endif /* (Counter_1_UsingFixedFunction) */
}

开发者ID:scarlso，项目名称:LED_controller，代码行数:27，代码来源:Counter_1.c

示例6: HeartbeatCounter_WritePeriod

/*******************************************************************************
* Function Name: HeartbeatCounter_WritePeriod
********************************************************************************
* Summary:
* Changes the period of the counter.  The new period 
* will be loaded the next time terminal count is detected.
*
* Parameters:  
*  period: (uint32) A value of 0 will result in
*         the counter remaining at zero.  
*
* Return: 
*  void
*
*******************************************************************************/
void HeartbeatCounter_WritePeriod(uint32 period) 
{
    #if(HeartbeatCounter_UsingFixedFunction)
        CY_SET_REG16(HeartbeatCounter_PERIOD_LSB_PTR,(uint16)period);
    #else
        CY_SET_REG32(HeartbeatCounter_PERIOD_LSB_PTR, period);
    #endif /* (HeartbeatCounter_UsingFixedFunction) */
}

开发者ID:ponioj，项目名称:embedded，代码行数:23，代码来源:HeartbeatCounter.c

示例7: ChargeDelay_WriteCompare

    /*******************************************************************************
    * Function Name: ChargeDelay_WriteCompare
    ********************************************************************************
    *
    * Summary:
    *  This funtion is used to change the compare1 value when the PWM is in Dither
    *  mode. The compare output will reflect the new value on the next UDB clock.
    *  The compare output will be driven high when the present counter value is
    *  compared to the compare value based on the compare mode defined in
    *  Dither Mode.
    *
    * Parameters:
    *  compare:  New compare value.
    *
    * Return:
    *  None
    *
    * Side Effects:
    *  This function is only available if the PWM mode parameter is set to
    *  Dither Mode, Center Aligned Mode or One Output Mode
    *
    *******************************************************************************/
    void ChargeDelay_WriteCompare(uint8 compare) \
                                       
    {
        #if(ChargeDelay_UsingFixedFunction)
            CY_SET_REG16(ChargeDelay_COMPARE1_LSB_PTR, (uint16)compare);
        #else
            CY_SET_REG8(ChargeDelay_COMPARE1_LSB_PTR, compare);
        #endif /* (ChargeDelay_UsingFixedFunction) */

        #if (ChargeDelay_PWMMode == ChargeDelay__B_PWM__DITHER)
            #if(ChargeDelay_UsingFixedFunction)
                CY_SET_REG16(ChargeDelay_COMPARE2_LSB_PTR, (uint16)(compare + 1u));
            #else
                CY_SET_REG8(ChargeDelay_COMPARE2_LSB_PTR, (compare + 1u));
            #endif /* (ChargeDelay_UsingFixedFunction) */
        #endif /* (ChargeDelay_PWMMode == ChargeDelay__B_PWM__DITHER) */
    }

开发者ID:dmaone，项目名称:CommonSense，代码行数:39，代码来源:ChargeDelay.c

示例8: ChargeDelay_WritePeriod

/*******************************************************************************
* Function Name: ChargeDelay_WritePeriod
********************************************************************************
*
* Summary:
*  This function is used to change the period of the counter.  The new period
*  will be loaded the next time terminal count is detected.
*
* Parameters:
*  period:  Period value. May be between 1 and (2^Resolution)-1.  A value of 0
*           will result in the counter remaining at zero.
*
* Return:
*  None
*
*******************************************************************************/
void ChargeDelay_WritePeriod(uint8 period) 
{
    #if(ChargeDelay_UsingFixedFunction)
        CY_SET_REG16(ChargeDelay_PERIOD_LSB_PTR, (uint16)period);
    #else
        CY_SET_REG8(ChargeDelay_PERIOD_LSB_PTR, period);
    #endif /* (ChargeDelay_UsingFixedFunction) */
}

开发者ID:dmaone，项目名称:CommonSense，代码行数:24，代码来源:ChargeDelay.c

示例9: hallTickCounter_WritePeriod

/*******************************************************************************
* Function Name: hallTickCounter_WritePeriod
********************************************************************************
* Summary:
* Changes the period of the counter.  The new period 
* will be loaded the next time terminal count is detected.
*
* Parameters:  
*  period: (uint8) A value of 0 will result in
*         the counter remaining at zero.  
*
* Return: 
*  void
*
*******************************************************************************/
void hallTickCounter_WritePeriod(uint8 period) 
{
    #if(hallTickCounter_UsingFixedFunction)
        CY_SET_REG16(hallTickCounter_PERIOD_LSB_PTR,(uint16)period);
    #else
        CY_SET_REG8(hallTickCounter_PERIOD_LSB_PTR, period);
    #endif /* (hallTickCounter_UsingFixedFunction) */
}

开发者ID:cvb0rg，项目名称:PSoC3_TutorialSeries_PIDcontrol，代码行数:23，代码来源:hallTickCounter.c

示例10: PWM_WriteCompare2

/*******************************************************************************
* Function Name: PWM_WriteCompare2
********************************************************************************
* 
* Summary:
*  This funtion is used to change the compare value, for compare1 output.  
*  The compare output will reflect the new value on the next UDB clock.  
*  The compare output will be driven high when the present counter value is 
*  less than or less than or equal to the compare register, depending on the 
*  mode.
*
* Parameters:  
*  compare:  New compare value.  
*
* Return: 
*  void
*
* Reentrant:
*  Yes
*
*******************************************************************************/
void PWM_WriteCompare2(uint8 compare) 
{
    #if(PWM_UsingFixedFunction)
        CY_SET_REG16(PWM_COMPARE2_LSB_PTR, compare);
    #else
        CY_SET_REG8(PWM_COMPARE2_LSB_PTR, compare);
    #endif
}

开发者ID:thurstonzhu，项目名称:ELE302-Carlab，代码行数:29，代码来源:PWM.c

示例11: MotorPWM_WritePeriod

/*******************************************************************************
* Function Name: MotorPWM_WritePeriod
********************************************************************************
*
* Summary:
*  This function is used to change the period of the counter.  The new period
*  will be loaded the next time terminal count is detected.
*
* Parameters:
*  period:  Period value. May be between 1 and (2^Resolution)-1.  A value of 0
*           will result in the counter remaining at zero.
*
* Return:
*  None
*
*******************************************************************************/
void MotorPWM_WritePeriod(uint8 period) 
{
    #if(MotorPWM_UsingFixedFunction)
        CY_SET_REG16(MotorPWM_PERIOD_LSB_PTR, (uint16)period);
    #else
        CY_SET_REG8(MotorPWM_PERIOD_LSB_PTR, period);
    #endif /* (MotorPWM_UsingFixedFunction) */
}

开发者ID:eamsuwan93，项目名称:PSoC-4-Compass-Sensor，代码行数:24，代码来源:MotorPWM.c

示例12: PWM_3_WritePeriod

/*******************************************************************************
* Function Name: PWM_3_WritePeriod
********************************************************************************
*
* Summary:
*  This function is used to change the period of the counter.  The new period
*  will be loaded the next time terminal count is detected.
*
* Parameters:
*  period:  Period value. May be between 1 and (2^Resolution)-1.  A value of 0
*           will result in the counter remaining at zero.
*
* Return:
*  None
*
*******************************************************************************/
void PWM_3_WritePeriod(uint8 period) 
{
    #if(PWM_3_UsingFixedFunction)
        CY_SET_REG16(PWM_3_PERIOD_LSB_PTR, (uint16)period);
    #else
        CY_SET_REG8(PWM_3_PERIOD_LSB_PTR, period);
    #endif /* (PWM_3_UsingFixedFunction) */
}

开发者ID:CodingBeagle，项目名称:IHA_3_Semester_Project，代码行数:24，代码来源:PWM_3.c

示例13: CsBtns_PWM_WriteCompare

    /*******************************************************************************
    * Function Name: CsBtns_PWM_WriteCompare
    ********************************************************************************
    *
    * Summary:
    *  This funtion is used to change the compare1 value when the PWM is in Dither
    *  mode. The compare output will reflect the new value on the next UDB clock.
    *  The compare output will be driven high when the present counter value is
    *  compared to the compare value based on the compare mode defined in
    *  Dither Mode.
    *
    * Parameters:
    *  compare:  New compare value.
    *
    * Return:
    *  None
    *
    * Side Effects:
    *  This function is only available if the PWM mode parameter is set to
    *  Dither Mode, Center Aligned Mode or One Output Mode
    *
    *******************************************************************************/
    void CsBtns_PWM_WriteCompare(uint16 compare) \
                                       
    {
        #if(CsBtns_PWM_UsingFixedFunction)
            CY_SET_REG16(CsBtns_PWM_COMPARE1_LSB_PTR, (uint16)compare);
        #else
            CY_SET_REG16(CsBtns_PWM_COMPARE1_LSB_PTR, compare);
        #endif /* (CsBtns_PWM_UsingFixedFunction) */

        #if (CsBtns_PWM_PWMMode == CsBtns_PWM__B_PWM__DITHER)
            #if(CsBtns_PWM_UsingFixedFunction)
                CY_SET_REG16(CsBtns_PWM_COMPARE2_LSB_PTR, (uint16)(compare + 1u));
            #else
                CY_SET_REG16(CsBtns_PWM_COMPARE2_LSB_PTR, (compare + 1u));
            #endif /* (CsBtns_PWM_UsingFixedFunction) */
        #endif /* (CsBtns_PWM_PWMMode == CsBtns_PWM__B_PWM__DITHER) */
    }

开发者ID:jh247247，项目名称:ECE3091-chickybot，代码行数:39，代码来源:CsBtns_PWM.c

示例14: Phase_Counter_WritePeriod

/*******************************************************************************
* Function Name: Phase_Counter_WritePeriod
********************************************************************************
* Summary:
* Changes the period of the counter.  The new period 
* will be loaded the next time terminal count is detected.
*
* Parameters:  
*  period: (uint32) A value of 0 will result in
*         the counter remaining at zero.  
*
* Return: 
*  void
*
*******************************************************************************/
void Phase_Counter_WritePeriod(uint32 period) 
{
    #if(Phase_Counter_UsingFixedFunction)
        CY_SET_REG16(Phase_Counter_PERIOD_LSB_PTR,(uint16)period);
    #else
        CY_SET_REG32(Phase_Counter_PERIOD_LSB_PTR, period);
    #endif /* (Phase_Counter_UsingFixedFunction) */
}

开发者ID:tslator，项目名称:DualBoard-043，代码行数:23，代码来源:Phase_Counter.c

示例15: pwm_WritePeriod

/*******************************************************************************
* Function Name: pwm_WritePeriod
********************************************************************************
*
* Summary:
*  This function is used to change the period of the counter.  The new period
*  will be loaded the next time terminal count is detected.
*
* Parameters:
*  period:  Period value. May be between 1 and (2^Resolution)-1.  A value of 0
*           will result in the counter remaining at zero.
*
* Return:
*  None
*
*******************************************************************************/
void pwm_WritePeriod(uint8 period)
{
#if(pwm_UsingFixedFunction)
    CY_SET_REG16(pwm_PERIOD_LSB_PTR, (uint16)period);
#else
    CY_SET_REG8(pwm_PERIOD_LSB_PTR, period);
#endif /* (pwm_UsingFixedFunction) */
}

开发者ID:cypresssemiconductorco，项目名称:bleapp，代码行数:24，代码来源:pwm.c

示例16: PWM_3_WriteCompare

    /*******************************************************************************
    * Function Name: PWM_3_WriteCompare
    ********************************************************************************
    *
    * Summary:
    *  This funtion is used to change the compare1 value when the PWM is in Dither
    *  mode. The compare output will reflect the new value on the next UDB clock.
    *  The compare output will be driven high when the present counter value is
    *  compared to the compare value based on the compare mode defined in
    *  Dither Mode.
    *
    * Parameters:
    *  compare:  New compare value.
    *
    * Return:
    *  None
    *
    * Side Effects:
    *  This function is only available if the PWM mode parameter is set to
    *  Dither Mode, Center Aligned Mode or One Output Mode
    *
    *******************************************************************************/
    void PWM_3_WriteCompare(uint8 compare) \
                                       
    {
        #if(PWM_3_UsingFixedFunction)
            CY_SET_REG16(PWM_3_COMPARE1_LSB_PTR, (uint16)compare);
        #else
            CY_SET_REG8(PWM_3_COMPARE1_LSB_PTR, compare);
        #endif /* (PWM_3_UsingFixedFunction) */

        #if (PWM_3_PWMMode == PWM_3__B_PWM__DITHER)
            #if(PWM_3_UsingFixedFunction)
                CY_SET_REG16(PWM_3_COMPARE2_LSB_PTR, (uint16)(compare + 1u));
            #else
                CY_SET_REG8(PWM_3_COMPARE2_LSB_PTR, (compare + 1u));
            #endif /* (PWM_3_UsingFixedFunction) */
        #endif /* (PWM_3_PWMMode == PWM_3__B_PWM__DITHER) */
    }

开发者ID:CodingBeagle，项目名称:IHA_3_Semester_Project，代码行数:39，代码来源:PWM_3.c

示例17: Counter_reset_gen_WritePeriod

/*******************************************************************************
* Function Name: Counter_reset_gen_WritePeriod
********************************************************************************
* Summary:
* Changes the period of the counter.  The new period 
* will be loaded the next time terminal count is detected.
*
* Parameters:  
*  period: (uint8) A value of 0 will result in
*         the counter remaining at zero.  
*
* Return: 
*  void
*
*******************************************************************************/
void Counter_reset_gen_WritePeriod(uint8 period) 
{
    #if(Counter_reset_gen_UsingFixedFunction)
        CY_SET_REG16(Counter_reset_gen_PERIOD_LSB_PTR,(uint16)period);
    #else
        CY_SET_REG8(Counter_reset_gen_PERIOD_LSB_PTR, period);
    #endif /* (Counter_reset_gen_UsingFixedFunction) */
}

开发者ID:betaEncoder，项目名称:PSoC_WS2812Bdriver，代码行数:23，代码来源:Counter_reset_gen.c

示例18: QuadDecoder_Cnt8_WritePeriod

/*******************************************************************************
* Function Name: QuadDecoder_Cnt8_WritePeriod
********************************************************************************
* Summary:
* Changes the period of the counter.  The new period 
* will be loaded the next time terminal count is detected.
*
* Parameters:  
*  period: (uint8) A value of 0 will result in
*         the counter remaining at zero.  
*
* Return: 
*  void
*
*******************************************************************************/
void QuadDecoder_Cnt8_WritePeriod(uint8 period) 
{
    #if(QuadDecoder_Cnt8_UsingFixedFunction)
        CY_SET_REG16(QuadDecoder_Cnt8_PERIOD_LSB_PTR,(uint16)period);
    #else
        CY_SET_REG8(QuadDecoder_Cnt8_PERIOD_LSB_PTR, period);
    #endif /* (QuadDecoder_Cnt8_UsingFixedFunction) */
}

开发者ID:Qmax，项目名称:PT6，代码行数:23，代码来源:QuadDecoder_Cnt8.c

示例19: PWM_WriteCounter

/*******************************************************************************
* Function Name: PWM_WriteCounter
********************************************************************************
* 
* Summary:
*  This function is used to change the counter value.
*
* Parameters:  
*  counter:  This value may be between 1 and (2^Resolution)-1.   
*
* Return: 
*  void
*
* Reentrant:
*  Yes
*
*******************************************************************************/
void PWM_WriteCounter(uint8 counter) 
{
    #if(PWM_UsingFixedFunction)
        CY_SET_REG16(PWM_COUNTER_LSB_PTR, (uint16)counter);
    #else
        CY_SET_REG8(PWM_COUNTER_LSB_PTR, counter);
    #endif
}

开发者ID:thurstonzhu，项目名称:ELE302-Carlab，代码行数:25，代码来源:PWM.c

示例20: Phase_Counter_WriteCompare

/*******************************************************************************
* Function Name: Phase_Counter_WriteCompare
********************************************************************************
* Summary:
* Changes the compare value.  The compare output will 
* reflect the new value on the next UDB clock.  The compare output will be 
* driven high when the present counter value compares true based on the 
* configured compare mode setting. 
*
* Parameters:  
*  Compare:  New compare value. 
*
* Return: 
*  void
*
*******************************************************************************/
void Phase_Counter_WriteCompare(uint32 compare) \
                                   
{
    #if(Phase_Counter_UsingFixedFunction)
        CY_SET_REG16(Phase_Counter_COMPARE_LSB_PTR, (uint16)compare);
    #else
        CY_SET_REG32(Phase_Counter_COMPARE_LSB_PTR, compare);
    #endif /* (Phase_Counter_UsingFixedFunction) */
}

开发者ID:tslator，项目名称:DualBoard-043，代码行数:25，代码来源:Phase_Counter.c

注：本文中的CY_SET_REG16函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ CY_SET_REG32函数代码示例发布时间：2022-05-30

C++ CY_GET_REG8函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18318|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9695|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8191|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8557|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8467|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9408|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8441|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7873|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8425|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7402|2022-11-06

客服电话

电子邮件

C++ CY_SET_REG16函数代码示例

示例1: ShiftReg_1_RestoreConfig

示例2: Timer_3_WriteCounter

示例3: PWM_Counter_WriteCounter

示例4: QuadDecoder_Cnt16_WriteCounter

示例5: Counter_1_WriteCounter

示例6: HeartbeatCounter_WritePeriod

示例7: ChargeDelay_WriteCompare

示例8: ChargeDelay_WritePeriod

示例9: hallTickCounter_WritePeriod

示例10: PWM_WriteCompare2

示例11: MotorPWM_WritePeriod

示例12: PWM_3_WritePeriod

示例13: CsBtns_PWM_WriteCompare

示例14: Phase_Counter_WritePeriod

示例15: pwm_WritePeriod

示例16: PWM_3_WriteCompare

示例17: Counter_reset_gen_WritePeriod

示例18: QuadDecoder_Cnt8_WritePeriod

示例19: PWM_WriteCounter

示例20: Phase_Counter_WriteCompare

请发表评论

全部评论

上一篇：

下一篇：

小程序开发-云函数开发中json解析

CVE-2022-31655

ufna/VaOceanMobile: Ocean shader created

armancodv/building-energy-model-matlab:

FGRibreau/import-tweets-to-mastodon: How

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053