C++ CY_SET_REG8函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中CY_SET_REG8函数的典型用法代码示例。如果您正苦于以下问题：C++ CY_SET_REG8函数的具体用法？C++ CY_SET_REG8怎么用？C++ CY_SET_REG8使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了CY_SET_REG8函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ChargeDelay_WritePeriod

/*******************************************************************************
* Function Name: ChargeDelay_WritePeriod
********************************************************************************
*
* Summary:
*  This function is used to change the period of the counter.  The new period
*  will be loaded the next time terminal count is detected.
*
* Parameters:
*  period:  Period value. May be between 1 and (2^Resolution)-1.  A value of 0
*           will result in the counter remaining at zero.
*
* Return:
*  None
*
*******************************************************************************/
void ChargeDelay_WritePeriod(uint8 period) 
{
    #if(ChargeDelay_UsingFixedFunction)
        CY_SET_REG16(ChargeDelay_PERIOD_LSB_PTR, (uint16)period);
    #else
        CY_SET_REG8(ChargeDelay_PERIOD_LSB_PTR, period);
    #endif /* (ChargeDelay_UsingFixedFunction) */
}

开发者ID:dmaone，项目名称:CommonSense，代码行数:24，代码来源:ChargeDelay.c

示例2: ChargeDelay_WriteCompare

    /*******************************************************************************
    * Function Name: ChargeDelay_WriteCompare
    ********************************************************************************
    *
    * Summary:
    *  This funtion is used to change the compare1 value when the PWM is in Dither
    *  mode. The compare output will reflect the new value on the next UDB clock.
    *  The compare output will be driven high when the present counter value is
    *  compared to the compare value based on the compare mode defined in
    *  Dither Mode.
    *
    * Parameters:
    *  compare:  New compare value.
    *
    * Return:
    *  None
    *
    * Side Effects:
    *  This function is only available if the PWM mode parameter is set to
    *  Dither Mode, Center Aligned Mode or One Output Mode
    *
    *******************************************************************************/
    void ChargeDelay_WriteCompare(uint8 compare) \
                                       
    {
        #if(ChargeDelay_UsingFixedFunction)
            CY_SET_REG16(ChargeDelay_COMPARE1_LSB_PTR, (uint16)compare);
        #else
            CY_SET_REG8(ChargeDelay_COMPARE1_LSB_PTR, compare);
        #endif /* (ChargeDelay_UsingFixedFunction) */

        #if (ChargeDelay_PWMMode == ChargeDelay__B_PWM__DITHER)
            #if(ChargeDelay_UsingFixedFunction)
                CY_SET_REG16(ChargeDelay_COMPARE2_LSB_PTR, (uint16)(compare + 1u));
            #else
                CY_SET_REG8(ChargeDelay_COMPARE2_LSB_PTR, (compare + 1u));
            #endif /* (ChargeDelay_UsingFixedFunction) */
        #endif /* (ChargeDelay_PWMMode == ChargeDelay__B_PWM__DITHER) */
    }

开发者ID:dmaone，项目名称:CommonSense，代码行数:39，代码来源:ChargeDelay.c

示例3: QuadDecoder_Cnt8_WritePeriod

/*******************************************************************************
* Function Name: QuadDecoder_Cnt8_WritePeriod
********************************************************************************
* Summary:
* Changes the period of the counter.  The new period 
* will be loaded the next time terminal count is detected.
*
* Parameters:  
*  period: (uint8) A value of 0 will result in
*         the counter remaining at zero.  
*
* Return: 
*  void
*
*******************************************************************************/
void QuadDecoder_Cnt8_WritePeriod(uint8 period) 
{
    #if(QuadDecoder_Cnt8_UsingFixedFunction)
        CY_SET_REG16(QuadDecoder_Cnt8_PERIOD_LSB_PTR,(uint16)period);
    #else
        CY_SET_REG8(QuadDecoder_Cnt8_PERIOD_LSB_PTR, period);
    #endif /* (QuadDecoder_Cnt8_UsingFixedFunction) */
}

开发者ID:Qmax，项目名称:PT6，代码行数:23，代码来源:QuadDecoder_Cnt8.c

示例4: PWM_B_WriteCompare

    /*******************************************************************************
    * Function Name: PWM_B_WriteCompare
    ********************************************************************************
    * 
    * Summary:
    *  This funtion is used to change the compare1 value when the PWM is in Dither
    *  mode. The compare output will reflect the new value on the next UDB clock. 
    *  The compare output will be driven high when the present counter value is 
    *  compared to the compare value based on the compare mode defined in 
    *  Dither Mode.
    *
    * Parameters:  
    *  compare:  New compare value.  
    *
    * Return: 
    *  None
    *
    * Side Effects:
    *  This function is only available if the PWM mode parameter is set to
    *  Dither Mode, Center Aligned Mode or One Output Mode
    *
    *******************************************************************************/
    void PWM_B_WriteCompare(uint8 compare) \
                                       
    {	
		#if(PWM_B_UsingFixedFunction)
			CY_SET_REG16(PWM_B_COMPARE1_LSB_PTR, (uint16)compare);
		#else
	        CY_SET_REG8(PWM_B_COMPARE1_LSB_PTR, compare);	
		#endif /* (PWM_B_UsingFixedFunction) */
        
        #if (PWM_B_PWMMode == PWM_B__B_PWM__DITHER)
            #if(PWM_B_UsingFixedFunction)
    			CY_SET_REG16(PWM_B_COMPARE2_LSB_PTR, (uint16)(compare + 1u));
    		#else
    	        CY_SET_REG8(PWM_B_COMPARE2_LSB_PTR, (compare + 1u));	
    		#endif /* (PWM_B_UsingFixedFunction) */
        #endif /* (PWM_B_PWMMode == PWM_B__B_PWM__DITHER) */
    }

开发者ID:RobotClubKut，项目名称:omuni_base，代码行数:39，代码来源:PWM_B.c

示例5: PWM_WritePeriod

/*******************************************************************************
* Function Name: PWM_WritePeriod
********************************************************************************
*
* Summary:
*  This function is used to change the period of the counter.  The new period
*  will be loaded the next time terminal count is detected.
*
* Parameters:
*  period:  Period value. May be between 1 and (2^Resolution)-1.  A value of 0
*           will result in the counter remaining at zero.
*
* Return:
*  None
*
*******************************************************************************/
void PWM_WritePeriod(uint8 period) 
{
    #if(PWM_UsingFixedFunction)
        CY_SET_REG16(PWM_PERIOD_LSB_PTR, (uint16)period);
    #else
        CY_SET_REG8(PWM_PERIOD_LSB_PTR, period);
    #endif /* (PWM_UsingFixedFunction) */
}

开发者ID:GSejas，项目名称:Control，代码行数:24，代码来源:PWM.c

示例6: gpio_irq_set

void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable) {

    if (!enable)
        CY_SET_REG8(obj->inttypeReg, 0x0);
    else if (event == IRQ_RISE)
        CY_SET_REG8(obj->inttypeReg, 0x01);
    else if (event == IRQ_FALL)
        CY_SET_REG8(obj->inttypeReg, 0x02);
    else if (event == (IRQ_FALL | IRQ_RISE))
        CY_SET_REG8(obj->inttypeReg, 0x03);
    else
        debug("Did not set any interrupt handler type!\r\n");

    obj->intTypeValue = CY_GET_REG8(obj->inttypeReg);
    CyIntSetVector(obj->irqLine, handle_interrupt_in);
    CyIntEnable(obj->irqLine);
}

开发者ID:getopenmono，项目名称:mbedComp，代码行数:17，代码来源:gpio_irq_api.c

示例7: QuadDecoder_Cnt8_WriteCompare

/*******************************************************************************
* Function Name: QuadDecoder_Cnt8_WriteCompare
********************************************************************************
* Summary:
* Changes the compare value.  The compare output will 
* reflect the new value on the next UDB clock.  The compare output will be 
* driven high when the present counter value compares true based on the 
* configured compare mode setting. 
*
* Parameters:  
*  Compare:  New compare value. 
*
* Return: 
*  void
*
*******************************************************************************/
void QuadDecoder_Cnt8_WriteCompare(uint8 compare) \
                                   
{
    #if(QuadDecoder_Cnt8_UsingFixedFunction)
        CY_SET_REG16(QuadDecoder_Cnt8_COMPARE_LSB_PTR, (uint16)compare);
    #else
        CY_SET_REG8(QuadDecoder_Cnt8_COMPARE_LSB_PTR, compare);
    #endif /* (QuadDecoder_Cnt8_UsingFixedFunction) */
}

开发者ID:Qmax，项目名称:PT6，代码行数:25，代码来源:QuadDecoder_Cnt8.c

示例8: ChargeDelay_WriteCompare2

 /*******************************************************************************
 * Function Name: ChargeDelay_WriteCompare2
 ********************************************************************************
 *
 * Summary:
 *  This funtion is used to change the compare value, for compare1 output.
 *  The compare output will reflect the new value on the next UDB clock.
 *  The compare output will be driven high when the present counter value is
 *  less than or less than or equal to the compare register, depending on the
 *  mode.
 *
 * Parameters:
 *  compare:  New compare value.
 *
 * Return:
 *  None
 *
 *******************************************************************************/
 void ChargeDelay_WriteCompare2(uint8 compare) \
                                     
 {
     #if(ChargeDelay_UsingFixedFunction)
         CY_SET_REG16(ChargeDelay_COMPARE2_LSB_PTR, compare);
     #else
         CY_SET_REG8(ChargeDelay_COMPARE2_LSB_PTR, compare);
     #endif /* (ChargeDelay_UsingFixedFunction) */
 }

开发者ID:dmaone，项目名称:CommonSense，代码行数:27，代码来源:ChargeDelay.c

示例9: USBFS_1_CheckActivity

/*******************************************************************************
* Function Name: USBFS_1_CheckActivity
********************************************************************************
*
* Summary:
*  Returns the activity status of the bus.  Clears the status hardware to
*  provide fresh activity status on the next call of this routine.
*
* Parameters:
*  None.
*
* Return:
*  1 - If bus activity was detected since the last call to this function
*  0 - If bus activity not was detected since the last call to this function
*
*******************************************************************************/
uint8 USBFS_1_CheckActivity(void) 
{
    uint8 r;

    r = CY_GET_REG8(USBFS_1_CR1_PTR);
    CY_SET_REG8(USBFS_1_CR1_PTR, (r & ((uint8)(~USBFS_1_CR1_BUS_ACTIVITY))));

    return((r & USBFS_1_CR1_BUS_ACTIVITY) >> USBFS_1_CR1_BUS_ACTIVITY_SHIFT);
}

开发者ID:akashbad，项目名称:6.115，代码行数:25，代码来源:USBFS_1.c

示例10: LED_SEG_PWM_WriteCompare1

/*******************************************************************************
* Function Name: LED_SEG_PWM_WriteCompare1
********************************************************************************
*
* Summary:
*  This funtion is used to change the compare1 value.  The compare output will
*  reflect the new value on the next UDB clock.  The compare output will be
*  driven high when the present counter value is less than or less than or
*  equal to the compare register, depending on the mode.
*
* Parameters:
*  compare:  New compare value.
*
* Return:
*  None
*
*******************************************************************************/
void LED_SEG_PWM_WriteCompare1(uint8 compare) \

{
#if(LED_SEG_PWM_UsingFixedFunction)
    CY_SET_REG16(LED_SEG_PWM_COMPARE1_LSB_PTR, (uint16)compare);
#else
    CY_SET_REG8(LED_SEG_PWM_COMPARE1_LSB_PTR, compare);
#endif /* (LED_SEG_PWM_UsingFixedFunction) */
}

开发者ID:remixvit，项目名称:Thermometr，代码行数:26，代码来源:LED_SEG_PWM.c

示例11: MotorPWM_WriteCompare2

 /*******************************************************************************
 * Function Name: MotorPWM_WriteCompare2
 ********************************************************************************
 *
 * Summary:
 *  This funtion is used to change the compare value, for compare1 output.
 *  The compare output will reflect the new value on the next UDB clock.
 *  The compare output will be driven high when the present counter value is
 *  less than or less than or equal to the compare register, depending on the
 *  mode.
 *
 * Parameters:
 *  compare:  New compare value.
 *
 * Return:
 *  None
 *
 *******************************************************************************/
 void MotorPWM_WriteCompare2(uint8 compare) \
                                     
 {
     #if(MotorPWM_UsingFixedFunction)
         CY_SET_REG16(MotorPWM_COMPARE2_LSB_PTR, compare);
     #else
         CY_SET_REG8(MotorPWM_COMPARE2_LSB_PTR, compare);
     #endif /* (MotorPWM_UsingFixedFunction) */
 }

开发者ID:eamsuwan93，项目名称:PSoC-4-Compass-Sensor，代码行数:27，代码来源:MotorPWM.c

示例12: TIMER_ThreadTimer_WritePeriod

/*******************************************************************************
* Function Name: TIMER_ThreadTimer_WritePeriod
********************************************************************************
*
* Summary:
*  This function is used to change the period of the counter.  The new period
*  will be loaded the next time terminal count is detected.
*
* Parameters:
*  period: This value may be between 1 and (2^Resolution)-1.  A value of 0 will
*          result in the counter remaining at zero.
*
* Return:
*  void
*
*******************************************************************************/
void TIMER_ThreadTimer_WritePeriod(uint8 period) 
{
    #if(TIMER_ThreadTimer_UsingFixedFunction)
        uint16 period_temp = (uint16)period;
        CY_SET_REG16(TIMER_ThreadTimer_PERIOD_LSB_PTR, period_temp);
    #else
        CY_SET_REG8(TIMER_ThreadTimer_PERIOD_LSB_PTR, period);
    #endif /*Write Period value with appropriate resolution suffix depending on UDB or fixed function implementation */
}

开发者ID:ipeerbhai，项目名称:FollowMe，代码行数:25，代码来源:TIMER_ThreadTimer.c

示例13: Counter_reset_gen_WriteCompare

/*******************************************************************************
* Function Name: Counter_reset_gen_WriteCompare
********************************************************************************
* Summary:
* Changes the compare value.  The compare output will 
* reflect the new value on the next UDB clock.  The compare output will be 
* driven high when the present counter value compares true based on the 
* configured compare mode setting. 
*
* Parameters:  
*  Compare:  New compare value. 
*
* Return: 
*  void
*
*******************************************************************************/
void Counter_reset_gen_WriteCompare(uint8 compare) \
                                   
{
    #if(Counter_reset_gen_UsingFixedFunction)
        CY_SET_REG16(Counter_reset_gen_COMPARE_LSB_PTR, (uint16)compare);
    #else
        CY_SET_REG8(Counter_reset_gen_COMPARE_LSB_PTR, compare);
    #endif /* (Counter_reset_gen_UsingFixedFunction) */
}

开发者ID:betaEncoder，项目名称:PSoC_WS2812Bdriver，代码行数:25，代码来源:Counter_reset_gen.c

示例14: PWM_3_WriteCompare2

 /*******************************************************************************
 * Function Name: PWM_3_WriteCompare2
 ********************************************************************************
 *
 * Summary:
 *  This funtion is used to change the compare value, for compare1 output.
 *  The compare output will reflect the new value on the next UDB clock.
 *  The compare output will be driven high when the present counter value is
 *  less than or less than or equal to the compare register, depending on the
 *  mode.
 *
 * Parameters:
 *  compare:  New compare value.
 *
 * Return:
 *  None
 *
 *******************************************************************************/
 void PWM_3_WriteCompare2(uint8 compare) \
                                     
 {
     #if(PWM_3_UsingFixedFunction)
         CY_SET_REG16(PWM_3_COMPARE2_LSB_PTR, compare);
     #else
         CY_SET_REG8(PWM_3_COMPARE2_LSB_PTR, compare);
     #endif /* (PWM_3_UsingFixedFunction) */
 }

开发者ID:CodingBeagle，项目名称:IHA_3_Semester_Project，代码行数:27，代码来源:PWM_3.c

示例15: PWM_BC_WriteCompare1

 /*******************************************************************************
 * Function Name: PWM_BC_WriteCompare1
 ********************************************************************************
 * 
 * Summary:
 *  This funtion is used to change the compare1 value.  The compare output will 
 *  reflect the new value on the next UDB clock.  The compare output will be 
 *  driven high when the present counter value is less than or less than or 
 *  equal to the compare register, depending on the mode.
 *
 * Parameters:  
 *  compare:  New compare value.  
 *
 * Return: 
 *  None
 *
 *******************************************************************************/
 void PWM_BC_WriteCompare1(uint8 compare) \
                                     
 {
     #if(PWM_BC_UsingFixedFunction)
         CY_SET_REG16(PWM_BC_COMPARE1_LSB_PTR, (uint16)compare);
     #else
         CY_SET_REG8(PWM_BC_COMPARE1_LSB_PTR, compare);
     #endif /* (PWM_BC_UsingFixedFunction) */
 }

开发者ID:thurstonzhu，项目名称:ELE302-Carlab，代码行数:26，代码来源:PWM_BC.c

示例16: hallTickCounter_WriteCompare

/*******************************************************************************
* Function Name: hallTickCounter_WriteCompare
********************************************************************************
* Summary:
* Changes the compare value.  The compare output will 
* reflect the new value on the next UDB clock.  The compare output will be 
* driven high when the present counter value compares true based on the 
* configured compare mode setting. 
*
* Parameters:  
*  Compare:  New compare value. 
*
* Return: 
*  void
*
*******************************************************************************/
void hallTickCounter_WriteCompare(uint8 compare) \
                                   
{
    #if(hallTickCounter_UsingFixedFunction)
        CY_SET_REG16(hallTickCounter_COMPARE_LSB_PTR, (uint16)compare);
    #else
        CY_SET_REG8(hallTickCounter_COMPARE_LSB_PTR, compare);
    #endif /* (hallTickCounter_UsingFixedFunction) */
}

开发者ID:cvb0rg，项目名称:PSoC3_TutorialSeries_PIDcontrol，代码行数:25，代码来源:hallTickCounter.c

示例17: pwm_WriteCompare2

/*******************************************************************************
* Function Name: pwm_WriteCompare2
********************************************************************************
*
* Summary:
*  This funtion is used to change the compare value, for compare1 output.
*  The compare output will reflect the new value on the next UDB clock.
*  The compare output will be driven high when the present counter value is
*  less than or less than or equal to the compare register, depending on the
*  mode.
*
* Parameters:
*  compare:  New compare value.
*
* Return:
*  None
*
*******************************************************************************/
void pwm_WriteCompare2(uint8 compare) \

{
#if(pwm_UsingFixedFunction)
    CY_SET_REG16(pwm_COMPARE2_LSB_PTR, compare);
#else
    CY_SET_REG8(pwm_COMPARE2_LSB_PTR, compare);
#endif /* (pwm_UsingFixedFunction) */
}

开发者ID:cypresssemiconductorco，项目名称:bleapp，代码行数:27，代码来源:pwm.c

示例18: Timer_2_WriteCounter

/*******************************************************************************
* Function Name: Timer_2_WriteCounter
********************************************************************************
*
* Summary:
*  This funtion is used to set the counter to a specific value
*
* Parameters:
*  counter:  New counter value.
*
* Return:
*  void
*
*******************************************************************************/
void Timer_2_WriteCounter(uint8 counter) 
{
   #if(Timer_2_UsingFixedFunction)
        /* This functionality is removed until a FixedFunction HW update to
         * allow this register to be written
         */
        CY_SET_REG16(Timer_2_COUNTER_LSB_PTR, (uint16)counter);
        
    #else
        CY_SET_REG8(Timer_2_COUNTER_LSB_PTR, counter);
    #endif /* Set Write Counter only for the UDB implementation (Write Counter not available in fixed function Timer */
}

开发者ID:Insepet，项目名称:GRP700U，代码行数:26，代码来源:Timer_2.c

示例19: pwm_right_WriteDeadTime

/*******************************************************************************
* Function Name: pwm_right_WriteDeadTime
********************************************************************************
* 
* Summary:
*  This function writes the dead-band counts to the corresponding register
*
* Parameters:  
*  deadtime:  Number of counts for dead time 
*
* Return: 
*  void
*
* Reentrant:
*  Yes
*
*******************************************************************************/
void pwm_right_WriteDeadTime(uint8 deadtime) 
{
    /* If using the Dead Band 1-255 mode then just write the register */
    #if(!pwm_right_DeadBand2_4)
        CY_SET_REG8(pwm_right_DEADBAND_COUNT_PTR, deadtime);
    #else
        /* Otherwise the data has to be masked and offset */        
        /* Clear existing data */
        pwm_right_DEADBAND_COUNT &= ~pwm_right_DEADBAND_COUNT_MASK; 
            /* Set new dead time */
        pwm_right_DEADBAND_COUNT |= (deadtime << pwm_right_DEADBAND_COUNT_SHIFT) & pwm_right_DEADBAND_COUNT_MASK; 
    #endif
}

开发者ID:telemaqueolivier，项目名称:french_robotic_cup，代码行数:30，代码来源:pwm_right.c

示例20: Counter_reset_gen_WriteCounter

/*******************************************************************************
* Function Name: Counter_reset_gen_WriteCounter
********************************************************************************
* Summary:
*   This funtion is used to set the counter to a specific value
*
* Parameters:  
*  counter:  New counter value. 
*
* Return: 
*  void 
*
*******************************************************************************/
void Counter_reset_gen_WriteCounter(uint8 counter) \
                                   
{
    #if(Counter_reset_gen_UsingFixedFunction)
        /* assert if block is already enabled */
        CYASSERT (0u == (Counter_reset_gen_GLOBAL_ENABLE & Counter_reset_gen_BLOCK_EN_MASK));
        /* If block is disabled, enable it and then write the counter */
        Counter_reset_gen_GLOBAL_ENABLE |= Counter_reset_gen_BLOCK_EN_MASK;
        CY_SET_REG16(Counter_reset_gen_COUNTER_LSB_PTR, (uint16)counter);
        Counter_reset_gen_GLOBAL_ENABLE &= ((uint8)(~Counter_reset_gen_BLOCK_EN_MASK));
    #else
        CY_SET_REG8(Counter_reset_gen_COUNTER_LSB_PTR, counter);
    #endif /* (Counter_reset_gen_UsingFixedFunction) */
}

开发者ID:betaEncoder，项目名称:PSoC_WS2812Bdriver，代码行数:27，代码来源:Counter_reset_gen.c

注：本文中的CY_SET_REG8函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ CY_SET_XTND_REG8函数代码示例发布时间：2022-05-30

C++ CY_SET_REG32函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18321|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9697|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8193|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8559|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8469|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9410|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8443|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7875|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8426|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7403|2022-11-06

客服电话

电子邮件

C++ CY_SET_REG8函数代码示例

示例1: ChargeDelay_WritePeriod

示例2: ChargeDelay_WriteCompare

示例3: QuadDecoder_Cnt8_WritePeriod

示例4: PWM_B_WriteCompare

示例5: PWM_WritePeriod

示例6: gpio_irq_set

示例7: QuadDecoder_Cnt8_WriteCompare

示例8: ChargeDelay_WriteCompare2

示例9: USBFS_1_CheckActivity

示例10: LED_SEG_PWM_WriteCompare1

示例11: MotorPWM_WriteCompare2

示例12: TIMER_ThreadTimer_WritePeriod

示例13: Counter_reset_gen_WriteCompare

示例14: PWM_3_WriteCompare2

示例15: PWM_BC_WriteCompare1

示例16: hallTickCounter_WriteCompare

示例17: pwm_WriteCompare2

示例18: Timer_2_WriteCounter

示例19: pwm_right_WriteDeadTime

示例20: Counter_reset_gen_WriteCounter

请发表评论

全部评论

上一篇：

下一篇：

dphi-official/Machine_Learning_Bootcamp

juven/maven-bash-completion: Maven Bash

win7系统注册表编辑器打开的操作方法

微信小程序支付开发笔记2--生成签名-统一下

route101/mastoinker: Quick image view as

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053