C++ EE_ReadVariable函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中EE_ReadVariable函数的典型用法代码示例。如果您正苦于以下问题：C++ EE_ReadVariable函数的具体用法？C++ EE_ReadVariable怎么用？C++ EE_ReadVariable使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了EE_ReadVariable函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: EE_ReadVariable

void ANO_Param::READ_GYRO_OFFSET(void)
{
	uint16_t temp[3];
	EE_ReadVariable(VirtAddVarTab[EE_6050_GYRO_X_OFFSET_ADDR], &temp[0]);
	EE_ReadVariable(VirtAddVarTab[EE_6050_GYRO_Y_OFFSET_ADDR], &temp[1]);
	EE_ReadVariable(VirtAddVarTab[EE_6050_GYRO_Z_OFFSET_ADDR], &temp[2]);
	mpu6050.Gyro_Offset.x = temp[0];
	mpu6050.Gyro_Offset.y = temp[1];
	mpu6050.Gyro_Offset.z = temp[2];
}

开发者ID:YuMeiLau，项目名称:UAV，代码行数:10，代码来源:ANO_Param.cpp

示例2: EE_READ_Attitude_PID

/*====================================================================================================*/
static void EE_READ_Attitude_PID(void)
{
	int16_t _temp;
	EE_ReadVariable(VirtAddVarTab[EE_PID_CORE_PITCH_P],&_temp);
	
	//  参数为0  说明已经清空flash  则使用默认参数
	if(_temp==0)  return;
	ctrl.pitch.core.kp =(float)_temp / 100;	
	EE_ReadVariable(VirtAddVarTab[EE_PID_CORE_PITCH_I],&_temp);
	ctrl.pitch.core.ki =(float)_temp / 1000;
	EE_ReadVariable(VirtAddVarTab[EE_PID_CORE_PITCH_D],&_temp);
	ctrl.pitch.core.kd = (float)_temp / 100;
	EE_ReadVariable(VirtAddVarTab[EE_PID_CORE_ROLL_P],&_temp);
	ctrl.roll.core.kp =(float)_temp / 100;
	EE_ReadVariable(VirtAddVarTab[EE_PID_CORE_ROLL_I],&_temp);
	ctrl.roll.core.ki = (float)_temp / 1000;	
	EE_ReadVariable(VirtAddVarTab[EE_PID_CORE_ROLL_D],&_temp);
	ctrl.roll.core.kd = (float)_temp / 100;
	EE_ReadVariable(VirtAddVarTab[EE_PID_CORE_YAW_P],&_temp);
	ctrl.yaw.core.kp =(float)_temp / 100;
	EE_ReadVariable(VirtAddVarTab[EE_PID_CORE_YAW_I],&_temp);
	ctrl.yaw.core.ki =(float)_temp / 1000;
	EE_ReadVariable(VirtAddVarTab[EE_PID_CORE_YAW_D], &_temp);
	ctrl.yaw.core.kd =(float)_temp / 100;
}

开发者ID:sensiki，项目名称:HT-Hawk，代码行数:26，代码来源:Algorithm_sqLite.c

示例3: readFlashParameter

/* read from flash and set --------------------------------------------------*/
u16 readFlashParameter(u16 para)
{
	u16 val;
	if (para == PARA_SET)
	{
		EE_ReadVariable(VirtAddVarTab[PARA_SET], &val);
		parameter[PARA_SET] = val;
	}
	else
	{		
		EE_ReadVariable(VirtAddVarTab[para+parameter[PARA_SET]], &val);
		parameter[para+parameter[PARA_SET]] = val;
	}
	return val;
}

开发者ID:changkyuya，项目名称:corvusm3，代码行数:16，代码来源:parameter.c

示例4: getHowMany

/*
 * Pobranie informacji o ilosci aktualnie zapisanych wcisniec
 * klawiszy
 */
void getHowMany(void)
{
	EE_ReadVariable(VirtAddVarTab[63], &howMany);
	if (howMany < 0x00 || howMany > 0x3F)
	{
		resetEEPROM();
		howMany = 0x00;
	}
}

开发者ID:synweap15，项目名称:PUT_PTM13_keyboard，代码行数:13，代码来源:main.c

示例5: conf_general_read_app_configuration

/**
 * Read app_configuration from EEPROM. If this fails, default values will be used.
 *
 * @param conf
 * A pointer to a app_configuration struct to write the read configuration to.
 */
void conf_general_read_app_configuration(app_configuration *conf) {
	bool is_ok = true;
	uint8_t *conf_addr = (uint8_t*)conf;
	uint16_t var;

	for (unsigned int i = 0;i < (sizeof(app_configuration) / 2);i++) {
		if (EE_ReadVariable(EEPROM_BASE_APPCONF + i, &var) == 0) {
			conf_addr[2 * i] = (var >> 8) & 0xFF;
			conf_addr[2 * i + 1] = var & 0xFF;
		} else {

开发者ID:nickman233，项目名称:bldc，代码行数:16，代码来源:conf_general.c

示例6: readFlashParameter

/* read from flash and set --------------------------------------------------*/
u16 readFlashParameter(u16 para)
{
	u16 val;
	if (para == PARA_SET)
	{
		EE_ReadVariable(VirtAddVarTab[PARA_SET], &val);
		parameter[PARA_SET] = val;
	}
	else
	{		
		EE_ReadVariable(VirtAddVarTab[para+parameter[PARA_SET]], &val);
		parameter[para+parameter[PARA_SET]] = val;
		// if we change the SW Parameter we have to init the filter
		if (para == PARA_SW) // = 4
		{
			initFilter(gyroAngle, copterAngle);
		}
	}
	return val;
}

开发者ID:changkyuya，项目名称:corvusm3，代码行数:21，代码来源:parameter.c

示例7: eeprom_read_block

void eeprom_read_block(void *__dst, const void *__src, size_t __n) {
  uint16_t data = 0xFF;
  uint16_t eeprom_address = (unsigned) __src;

  eeprom_init();

  for (uint8_t c = 0; c < __n; c++) {
    EE_ReadVariable(eeprom_address+c, &data);
    *((uint8_t*)__dst + c) = data;
  }
}

开发者ID:teemuatlut，项目名称:Marlin，代码行数:11，代码来源:EmulatedEeprom.cpp

示例8: eeprom_read_byte

uint8_t eeprom_read_byte(uint8_t *pos) {
  uint16_t data = 0xFF;
  uint16_t eeprom_address = (unsigned)pos;

  eeprom_init();

  if (EE_ReadVariable(eeprom_address, &data) != EE_OK) {
    return (unsigned char)data;
  }
  return (unsigned char)data;
}

开发者ID:teemuatlut，项目名称:Marlin，代码行数:11，代码来源:EmulatedEeprom.cpp

示例9: eeprom_restore

/* eeprom: 01,23,45 -> Read results: (10)(32)(54) -> buffer: 012345 */
uint8_t eeprom_restore(uint8_t *buf, uint8_t virt_addr)
{
	uint8_t i, retVal = 0;
	for(i=0; i<3; i++) {
		if (EE_ReadVariable(virt_addr + i, (uint16_t *) &buf[2*i])) {
			/* the variable was not found or no valid page was found */
			*((uint16_t *) &buf[2*i]) = 0xFFFF;
			retVal = 1;
		}
	}
	return retVal;
}

开发者ID:j1rie，项目名称:IRMP_STM32，代码行数:13，代码来源:main.c

示例10: setup_FLASH

void setup_FLASH()
{
	uint16_t tmp_eeprom_data_structure_version;
	FLASH_Unlock();
	EE_Init();
	EE_ReadVariable(VirtAddVarTab[index_eeprom_data_structure_version],&tmp_eeprom_data_structure_version);	//eeprom_data_structure_version lesen
	if (tmp_eeprom_data_structure_version != eeprom_data_structure_version)
	{
		EE_Format();
		EE_WriteVariable(VirtAddVarTab[index_eeprom_data_structure_version],eeprom_data_structure_version);
	}
}

开发者ID:EmbeddedFiedel，项目名称:Carrera_F407_Controlunit，代码行数:12，代码来源:Flash.cpp

示例11: main

/**
  * @brief  Main program.
  * @param  None
  * @retval None
  */
int main(void)
{
  /* STM32F103xB HAL library initialization:
       - Configure the Flash prefetch
       - Systick timer is configured by default as source of time base, but user 
         can eventually implement his proper time base source (a general purpose 
         timer for example or other time source), keeping in mind that Time base 
         duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and 
         handled in milliseconds basis.
       - Set NVIC Group Priority to 4
       - Low Level Initialization
     */
  HAL_Init();

  /* Configure the system clock to 64 MHz */
  SystemClock_Config();

  /* Unlock the Flash Program Erase controller */
  HAL_FLASH_Unlock();

  /* EEPROM Init */
  EE_Init();

/* --- Store successively many values of the three variables in the EEPROM ---*/
  /* Store 0x1000 values of Variable1 in EEPROM */
  for (VarValue = 1; VarValue <= 0x1000; VarValue++)
  {
    EE_WriteVariable(VirtAddVarTab[0], VarValue);
  }

  /* read the last stored variables data*/
  EE_ReadVariable(VirtAddVarTab[0], &VarDataTab[0]);


  /* Store 0x2000 values of Variable2 in EEPROM */
  for (VarValue = 1; VarValue <= 0x2000; VarValue++)
  {
    EE_WriteVariable(VirtAddVarTab[1], VarValue);
  }

  /* read the last stored variables data*/
  EE_ReadVariable(VirtAddVarTab[0], &VarDataTab[0]);
  EE_ReadVariable(VirtAddVarTab[1], &VarDataTab[1]);


  /* Store 0x3000 values of Variable3 in EEPROM */
  for (VarValue = 1; VarValue <= 0x3000; VarValue++)
  {
    EE_WriteVariable(VirtAddVarTab[2], VarValue);
  }

  /* read the last stored variables data*/
  EE_ReadVariable(VirtAddVarTab[0], &VarDataTab[0]);
  EE_ReadVariable(VirtAddVarTab[1], &VarDataTab[1]);
  EE_ReadVariable(VirtAddVarTab[2], &VarDataTab[2]);

  while (1)
  {
  };
}

开发者ID:NjordCZ，项目名称:STM32Cube_FW_F1，代码行数:65，代码来源:main.c

示例12: loadParameter

/* load Parameter from virtual EEPROM ---------------------------------------*/
void loadParameter()
{
	u16 val;
	u16 i;

	// test if flash is clear
	EE_ReadVariable(401, &val);
	if (val != 99)
	{
		loadDefault();
	}
	EE_WriteVariable(401, 99);
	
	for (i = 0;i <= USED_PARAMETER; i++)
	{
		EE_ReadVariable(VirtAddVarTab[i], &val);
		parameter[i] = val;
		// for test
		print_para(i);
		Delay(2); // prevent txbuffer overvlow
	}
}

开发者ID:changkyuya，项目名称:corvusm3，代码行数:23，代码来源:parameter.c

示例13: display_info_get

void display_info_get(uint8_t *distortion_type, uint8_t *buf)
{
    bool found_display_info = 1;
    uint16_t temp_distortion = default_distortion_type;
    EE_ReadVariable(EE_DISPLAY_INFO_DISTORTION_TYPE, &temp_distortion);
    *distortion_type = temp_distortion;

    uint16_t *readbuf = (uint16_t *)buf;

    for (uint8_t i = 0; i < EE_DISPLAY_INFO_SIZE; i++) {
        if (EE_ReadVariable(EE_DISPLAY_INFO_START+i, &readbuf[i])) {
            found_display_info = 0;
            break;
        }
    }

    // if display info stuff wasn't found in EEPROM, load the defaults
    if (!found_display_info) {
        // offset back to the start of the buffer
        generate_default_display_info(buf-4);
    }
}

开发者ID:2zuckerberg，项目名称:RiftDK1，代码行数:22，代码来源:display_info.c

示例14: getConfig

void getConfig()
{
	FLASH_Unlock();

	uint16_t i;

	uint16_t *ptr;
	EE_Init();
	EE_ReadVariable(EADDR_IS_INITIALIZED,&i);
	if(i != 0x5253)
	{
		//empty or corrupted EEPROM detected: write default config
		//EE_Format();
		EE_WriteVariable(EADDR_IS_INITIALIZED, 0x5253);
		s.commutationMethod = commutationMethod_HALL;
		s.inputMethod = inputMethod_stepDir;
		s.encoder_PPR = 4000;
		s.encoder_poles = 4;
		s.encoder_counts_per_step = 10;
		s.pid_Kp = 10;
		s.pid_Ki = 0;
		s.pid_Kd = 0;
		s.usart_baud = 1152;
		writeConfig(s);
		return;

	}
	ptr = (uint16_t *)&s;
	for(i=0; i<sizeof(servoConfig)/2;i++)
	{

		if(EE_ReadVariable(EADDR_CONFIG_START+i, ptr)!=0)
			usart_sendStr("Flash Error\n\r");
		ptr++;
	}

	return;

}

开发者ID:yikedz，项目名称:bldc-drive，代码行数:39，代码来源:configuration.c

示例15: eeprom_restore

/* eeprom: 01,23,45 -> Read results: (10)(32)(54) -> memcpy 01|23|45 -> buffer: 012345 */
uint8_t eeprom_restore(uint8_t *buf, uint8_t virt_addr)
{
	uint8_t i, retVal = 0;
	uint16_t EE_Data;
	for(i=0; i<3; i++) {
		if (EE_ReadVariable(virt_addr + i, &EE_Data)) {
			/* the variable was not found or no valid page was found */
			EE_Data = 0xFFFF;
			retVal = 1;
		}
		memcpy(&buf[2*i], &EE_Data, 2);
	}
	return retVal;
}

开发者ID:M-Reimer，项目名称:IRMP_STM32，代码行数:15，代码来源:main.c

示例16: EE_READ_MAG_OFFSET

/*====================================================================================================*/
static void EE_READ_MAG_OFFSET(void)
{
	EE_ReadVariable(VirtAddVarTab[3], &HMC58X3_limit[0]);
	EE_ReadVariable(VirtAddVarTab[4], &HMC58X3_limit[1]);
	EE_ReadVariable(VirtAddVarTab[5], &HMC58X3_limit[2]);
	EE_ReadVariable(VirtAddVarTab[6], &HMC58X3_limit[3]);
	EE_ReadVariable(VirtAddVarTab[7], &HMC58X3_limit[4]);
	EE_ReadVariable(VirtAddVarTab[8], &HMC58X3_limit[5]);
}

开发者ID:sensiki，项目名称:HT-Hawk，代码行数:10，代码来源:Algorithm_sqLite.c

示例17: EE_Read_ACC_GYRO_Offset

void EE_Read_ACC_GYRO_Offset(void)
{
	EE_ReadVariable(VirtAddVarTab[EE_ACC_X_OFFSET], (u16 *)(&mpu_info.offset_acc.x));
	EE_ReadVariable(VirtAddVarTab[EE_ACC_Y_OFFSET], (u16 *)(&mpu_info.offset_acc.y));
	EE_ReadVariable(VirtAddVarTab[EE_ACC_Z_OFFSET], (u16 *)(&mpu_info.offset_acc.z));
	EE_ReadVariable(VirtAddVarTab[EE_GYRO_X_OFFSET], (u16 *)(&mpu_info.offset_gyro.x));
	EE_ReadVariable(VirtAddVarTab[EE_GYRO_Y_OFFSET], (u16 *)(&mpu_info.offset_gyro.y));
	EE_ReadVariable(VirtAddVarTab[EE_GYRO_Z_OFFSET], (u16 *)(&mpu_info.offset_gyro.z));
}

开发者ID:imTim12138，项目名称:Nev-Rocker，代码行数:9，代码来源:func.c

示例18: loadParameter

/* load Parameter from virtual EEPROM ---------------------------------------*/
void loadParameter()
{
	u16 val;
	u16 i;

	
	for (i = 0;i <= USED_PARAMETER; i++)
	{
		EE_ReadVariable(VirtAddVarTab[i], &val);
		parameter[i] = val;
		// for test
		print_para(i);
		Delay(2); // prevent txbuffer overvlow
	}
}

开发者ID:changkyuya，项目名称:corvusm3，代码行数:16，代码来源:parameter.c

示例19: EE_TransferVariable

static uint16_t EE_TransferVariable(uint16_t VirtAddress, uint32_t BaseAddress)
{
  if (( *(__IO uint16_t*)(BaseAddress + 6)) != VirtAddress)
  {
    /* Read the last variables' updates */
    uint16_t ReadStatus = EE_ReadVariable(VirtAddress, &DataVar);
    /* In case variable corresponding to the virtual address was found */
    if (ReadStatus != 0x1)
    {
      /* Transfer the variable to the new page */
      return EE_VerifyPageFullWriteVariable(VirtAddress, DataVar);
    }
  }

  return FLASH_COMPLETE;
}

开发者ID:2zuckerberg，项目名称:RiftDK1，代码行数:16，代码来源:eeprom.c

示例20: EE_READ_PID

void EE_READ_PID(void)
{
	u16 _temp;
	EE_ReadVariable(VirtAddVarTab[EE_PID_ROL_P],&_temp);
	PID_ROL.P = (float)_temp / 100;
	EE_ReadVariable(VirtAddVarTab[EE_PID_ROL_I],&_temp);
	PID_ROL.I = (float)_temp / 100;
	EE_ReadVariable(VirtAddVarTab[EE_PID_ROL_D],&_temp);
	PID_ROL.D = (float)_temp / 100;
	EE_ReadVariable(VirtAddVarTab[EE_PID_PIT_P],&_temp);
	PID_PIT.P = (float)_temp / 100;
	EE_ReadVariable(VirtAddVarTab[EE_PID_PIT_I],&_temp);
	PID_PIT.I = (float)_temp / 100;
	EE_ReadVariable(VirtAddVarTab[EE_PID_PIT_D],&_temp);
	PID_PIT.D = (float)_temp / 100;
	EE_ReadVariable(VirtAddVarTab[EE_PID_YAW_P],&_temp);
	PID_YAW.P = (float)_temp / 100;
	EE_ReadVariable(VirtAddVarTab[EE_PID_YAW_I],&_temp);
	PID_YAW.I = (float)_temp / 100;
	EE_ReadVariable(VirtAddVarTab[EE_PID_YAW_D],&_temp);
	PID_YAW.D = (float)_temp / 100;
}

开发者ID:JokerGeek，项目名称:Raging_Fire_Quad-rotor，代码行数:22，代码来源:BSP.c

注：本文中的EE_ReadVariable函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ EFI_PAGES_TO_SIZE函数代码示例发布时间：2022-05-30

C++ ED_space_clip_get_clip函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18316|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9694|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8191|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8557|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8467|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9408|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8441|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7873|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8425|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7402|2022-11-06

客服电话

电子邮件

C++ EE_ReadVariable函数代码示例

示例1: EE_ReadVariable

示例2: EE_READ_Attitude_PID

示例3: readFlashParameter

示例4: getHowMany

示例5: conf_general_read_app_configuration

示例6: readFlashParameter

示例7: eeprom_read_block

示例8: eeprom_read_byte

示例9: eeprom_restore

示例10: setup_FLASH

示例11: main

示例12: loadParameter

示例13: display_info_get

示例14: getConfig

示例15: eeprom_restore

示例16: EE_READ_MAG_OFFSET

示例17: EE_Read_ACC_GYRO_Offset

示例18: loadParameter

示例19: EE_TransferVariable

示例20: EE_READ_PID

请发表评论

全部评论

上一篇：

下一篇：

godaddy/kubernetes-client: Simplified Ku

solegalli/feature-selection-for-machine-

armancodv/building-energy-model-matlab:

win7系统重装系统初始设置的操作方法

diehl/Incremental-SVM-Learning-in-MATLAB

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053