本文整理汇总了C++中ERR_add_error_data函数的典型用法代码示例。如果您正苦于以下问题:C++ ERR_add_error_data函数的具体用法?C++ ERR_add_error_data怎么用?C++ ERR_add_error_data使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了ERR_add_error_data函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: rand_bytes
//.........这里部分代码省略.........
if (state_index > state_num)
state_index %= state_num;
/*
* state[st_idx], ..., state[(st_idx + num_ceil - 1) % st_num] are now
* ours (but other threads may use them too)
*/
md_count[0] += 1;
/* before unlocking, we must clear 'crypto_lock_rand' */
crypto_lock_rand = 0;
ASYNC_unblock_pause();
CRYPTO_THREAD_unlock(rand_lock);
while (num > 0) {
/* num_ceil -= MD_DIGEST_LENGTH/2 */
j = (num >= MD_DIGEST_LENGTH / 2) ? MD_DIGEST_LENGTH / 2 : num;
num -= j;
if (!MD_Init(m))
goto err;
#ifndef GETPID_IS_MEANINGLESS
if (curr_pid) { /* just in the first iteration to save time */
if (!MD_Update(m, (unsigned char *)&curr_pid, sizeof curr_pid))
goto err;
curr_pid = 0;
}
#endif
if (curr_time) { /* just in the first iteration to save time */
if (!MD_Update(m, (unsigned char *)&curr_time, sizeof curr_time))
goto err;
if (!MD_Update(m, (unsigned char *)&tv, sizeof tv))
goto err;
curr_time = 0;
if (!rand_hw_seed(m))
goto err;
}
if (!MD_Update(m, local_md, MD_DIGEST_LENGTH))
goto err;
if (!MD_Update(m, (unsigned char *)&(md_c[0]), sizeof(md_c)))
goto err;
k = (st_idx + MD_DIGEST_LENGTH / 2) - st_num;
if (k > 0) {
if (!MD_Update(m, &(state[st_idx]), MD_DIGEST_LENGTH / 2 - k))
goto err;
if (!MD_Update(m, &(state[0]), k))
goto err;
} else if (!MD_Update(m, &(state[st_idx]), MD_DIGEST_LENGTH / 2))
goto err;
if (!MD_Final(m, local_md))
goto err;
for (i = 0; i < MD_DIGEST_LENGTH / 2; i++) {
/* may compete with other threads */
state[st_idx++] ^= local_md[i];
if (st_idx >= st_num)
st_idx = 0;
if (i < j)
*(buf++) = local_md[i + MD_DIGEST_LENGTH / 2];
}
}
if (!MD_Init(m)
|| !MD_Update(m, (unsigned char *)&(md_c[0]), sizeof(md_c))
|| !MD_Update(m, local_md, MD_DIGEST_LENGTH))
goto err;
CRYPTO_THREAD_write_lock(rand_lock);
/*
* Prevent deadlocks if we end up in an async engine
*/
ASYNC_block_pause();
if (!MD_Update(m, md, MD_DIGEST_LENGTH) || !MD_Final(m, md)) {
CRYPTO_THREAD_unlock(rand_lock);
goto err;
}
ASYNC_unblock_pause();
CRYPTO_THREAD_unlock(rand_lock);
EVP_MD_CTX_free(m);
if (ok)
return (1);
else if (pseudo)
return 0;
else {
RANDerr(RAND_F_RAND_BYTES, RAND_R_PRNG_NOT_SEEDED);
ERR_add_error_data(1, "You need to read the OpenSSL FAQ, "
"https://www.openssl.org/docs/faq.html");
return (0);
}
err:
RANDerr(RAND_F_RAND_BYTES, ERR_R_EVP_LIB);
EVP_MD_CTX_free(m);
return 0;
err_mem:
RANDerr(RAND_F_RAND_BYTES, ERR_R_MALLOC_FAILURE);
EVP_MD_CTX_free(m);
return 0;
}
开发者ID:2007750219,项目名称:openssl,代码行数:101,代码来源:md_rand.c
示例2: ssleay_rand_bytes
//.........这里部分代码省略.........
while (n > 0)
{
#if MD_DIGEST_LENGTH > 20
# error "Please adjust DUMMY_SEED."
#endif
#define DUMMY_SEED "...................." /* at least MD_DIGEST_LENGTH */
/* Note that the seed does not matter, it's just that
* ssleay_rand_add expects to have something to hash. */
ssleay_rand_add(DUMMY_SEED, MD_DIGEST_LENGTH, 0.0);
n -= MD_DIGEST_LENGTH;
}
if (ok)
stirred_pool = 1;
}
st_idx=state_index;
st_num=state_num;
md_c[0] = md_count[0];
md_c[1] = md_count[1];
TINYCLR_SSL_MEMCPY(local_md, md, sizeof md);
state_index+=num_ceil;
if (state_index > state_num)
state_index %= state_num;
/* state[st_idx], ..., state[(st_idx + num_ceil - 1) % st_num]
* are now ours (but other threads may use them too) */
md_count[0] += 1;
/* before unlocking, we must clear 'crypto_lock_rand' */
crypto_lock_rand = 0;
CRYPTO_w_unlock(CRYPTO_LOCK_RAND);
while (num > 0)
{
/* num_ceil -= MD_DIGEST_LENGTH/2 */
j=(num >= MD_DIGEST_LENGTH/2)?MD_DIGEST_LENGTH/2:num;
num-=j;
MD_Init(&m);
#ifndef GETPID_IS_MEANINGLESS
if (curr_pid) /* just in the first iteration to save time */
{
MD_Update(&m,(unsigned char*)&curr_pid,sizeof curr_pid);
curr_pid = 0;
}
#endif
MD_Update(&m,local_md,MD_DIGEST_LENGTH);
MD_Update(&m,(unsigned char *)&(md_c[0]),sizeof(md_c));
#ifndef PURIFY /* purify complains */
/* The following line uses the supplied buffer as a small
* source of entropy: since this buffer is often uninitialised
* it may cause programs such as purify or valgrind to
* complain. So for those builds it is not used: the removal
* of such a small source of entropy has negligible impact on
* security.
*/
MD_Update(&m,buf,j);
#endif
k=(st_idx+MD_DIGEST_LENGTH/2)-st_num;
if (k > 0)
{
MD_Update(&m,&(state[st_idx]),MD_DIGEST_LENGTH/2-k);
MD_Update(&m,&(state[0]),k);
}
else
MD_Update(&m,&(state[st_idx]),MD_DIGEST_LENGTH/2);
MD_Final(&m,local_md);
for (i=0; i<MD_DIGEST_LENGTH/2; i++)
{
state[st_idx++]^=local_md[i]; /* may compete with other threads */
if (st_idx >= st_num)
st_idx=0;
if (i < j)
*(buf++)=local_md[i+MD_DIGEST_LENGTH/2];
}
}
MD_Init(&m);
MD_Update(&m,(unsigned char *)&(md_c[0]),sizeof(md_c));
MD_Update(&m,local_md,MD_DIGEST_LENGTH);
CRYPTO_w_lock(CRYPTO_LOCK_RAND);
MD_Update(&m,md,MD_DIGEST_LENGTH);
MD_Final(&m,md);
CRYPTO_w_unlock(CRYPTO_LOCK_RAND);
EVP_MD_CTX_cleanup(&m);
if (ok)
return(1);
else
{
RANDerr(RAND_F_SSLEAY_RAND_BYTES,RAND_R_PRNG_NOT_SEEDED);
ERR_add_error_data(1, "You need to read the OpenSSL FAQ, "
"http://www.openssl.org/support/faq.html");
return(0);
}
}
开发者ID:dienbk7x,项目名称:NetmfSTM32,代码行数:101,代码来源:md_rand.cpp
示例3: FILESPEC1
static char *vms_merger(DSO *dso, const char *filespec1,
const char *filespec2)
{
int status;
int filespec1len, filespec2len;
struct FAB fab;
struct NAMX_STRUCT nam;
char esa[NAMX_MAXRSS + 1];
char *merged;
/* Arrange 32-bit pointer to (copied) string storage, if needed. */
# if __INITIAL_POINTER_SIZE == 64
# define FILESPEC1 filespec1_32p;
# define FILESPEC2 filespec2_32p;
# pragma pointer_size save
# pragma pointer_size 32
char *filespec1_32p;
char *filespec2_32p;
# pragma pointer_size restore
char filespec1_32[NAMX_MAXRSS + 1];
char filespec2_32[NAMX_MAXRSS + 1];
# else /* __INITIAL_POINTER_SIZE == 64 */
# define FILESPEC1 ((char *) filespec1)
# define FILESPEC2 ((char *) filespec2)
# endif /* __INITIAL_POINTER_SIZE == 64 [else] */
if (!filespec1)
filespec1 = "";
if (!filespec2)
filespec2 = "";
filespec1len = strlen(filespec1);
filespec2len = strlen(filespec2);
# if __INITIAL_POINTER_SIZE == 64
/* Copy the file names to storage with a 32-bit pointer. */
filespec1_32p = filespec1_32;
filespec2_32p = filespec2_32;
strcpy(filespec1_32p, filespec1);
strcpy(filespec2_32p, filespec2);
# endif /* __INITIAL_POINTER_SIZE == 64 [else] */
fab = cc$rms_fab;
nam = CC_RMS_NAMX;
FAB_OR_NAML(fab, nam).FAB_OR_NAML_FNA = FILESPEC1;
FAB_OR_NAML(fab, nam).FAB_OR_NAML_FNS = filespec1len;
FAB_OR_NAML(fab, nam).FAB_OR_NAML_DNA = FILESPEC2;
FAB_OR_NAML(fab, nam).FAB_OR_NAML_DNS = filespec2len;
NAMX_DNA_FNA_SET(fab)
nam.NAMX_ESA = esa;
nam.NAMX_ESS = NAMX_MAXRSS;
nam.NAMX_NOP = NAM$M_SYNCHK | NAM$M_PWD;
SET_NAMX_NO_SHORT_UPCASE(nam);
fab.FAB_NAMX = &nam;
status = sys$parse(&fab, 0, 0);
if (!$VMS_STATUS_SUCCESS(status)) {
unsigned short length;
char errstring[257];
struct dsc$descriptor_s errstring_dsc;
errstring_dsc.dsc$w_length = sizeof(errstring);
errstring_dsc.dsc$b_dtype = DSC$K_DTYPE_T;
errstring_dsc.dsc$b_class = DSC$K_CLASS_S;
errstring_dsc.dsc$a_pointer = errstring;
status = sys$getmsg(status, &length, &errstring_dsc, 1, 0);
if (!$VMS_STATUS_SUCCESS(status))
lib$signal(status); /* This is really bad. Abort! */
else {
errstring[length] = '\0';
DSOerr(DSO_F_VMS_MERGER, DSO_R_FAILURE);
ERR_add_error_data(7,
"filespec \"", filespec1, "\", ",
"defaults \"", filespec2, "\": ", errstring);
}
return (NULL);
}
merged = OPENSSL_malloc(nam.NAMX_ESL + 1);
if (!merged)
goto malloc_err;
strncpy(merged, nam.NAMX_ESA, nam.NAMX_ESL);
merged[nam.NAMX_ESL] = '\0';
return (merged);
malloc_err:
DSOerr(DSO_F_VMS_MERGER, ERR_R_MALLOC_FAILURE);
}
开发者ID:AimaTeam-hehai,项目名称:openssl,代码行数:93,代码来源:dso_vms.c
示例4: file_ctrl
//.........这里部分代码省略.........
/* Dangerous to set stdin/stdout to raw (unless redirected) */
else
{
if (fd == STDIN_FILENO || fd == STDOUT_FILENO)
{
if (isatty(fd) <= 0)
_setmode(fd,_O_BINARY);
}
else
_setmode(fd,_O_BINARY);
}
#elif defined(OPENSSL_SYS_OS2)
int fd = fileno((FILE*)ptr);
if (num & BIO_FP_TEXT)
setmode(fd, O_TEXT);
else
setmode(fd, O_BINARY);
#endif
}
break;
case BIO_C_SET_FILENAME:
file_free(b);
b->shutdown=(int)num&BIO_CLOSE;
if (num & BIO_FP_APPEND)
{
if (num & BIO_FP_READ)
BUF_strlcpy(p,"a+",sizeof p);
else BUF_strlcpy(p,"a",sizeof p);
}
else if ((num & BIO_FP_READ) && (num & BIO_FP_WRITE))
BUF_strlcpy(p,"r+",sizeof p);
else if (num & BIO_FP_WRITE)
BUF_strlcpy(p,"w",sizeof p);
else if (num & BIO_FP_READ)
BUF_strlcpy(p,"r",sizeof p);
else
{
BIOerr(BIO_F_FILE_CTRL,BIO_R_BAD_FOPEN_MODE);
ret=0;
break;
}
#if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_OS2) || defined(OPENSSL_SYS_WIN32_CYGWIN)
if (!(num & BIO_FP_TEXT))
strcat(p,"b");
else
strcat(p,"t");
#endif
#if defined(OPENSSL_SYS_NETWARE)
if (!(num & BIO_FP_TEXT))
strcat(p,"b");
else
strcat(p,"t");
#endif
fp=fopen(ptr,p);
if (fp == NULL)
{
SYSerr(SYS_F_FOPEN,get_last_sys_error());
ERR_add_error_data(5,"fopen('",ptr,"','",p,"')");
BIOerr(BIO_F_FILE_CTRL,ERR_R_SYS_LIB);
ret=0;
break;
}
b->ptr=fp;
b->init=1;
BIO_clear_flags(b,BIO_FLAGS_UPLINK); /* we did fopen -> we disengage UPLINK */
break;
case BIO_C_GET_FILE_PTR:
/* the ptr parameter is actually a FILE ** in this case. */
if (ptr != NULL)
{
fpp=(FILE **)ptr;
*fpp=(FILE *)b->ptr;
}
break;
case BIO_CTRL_GET_CLOSE:
ret=(long)b->shutdown;
break;
case BIO_CTRL_SET_CLOSE:
b->shutdown=(int)num;
break;
case BIO_CTRL_FLUSH:
if (b->flags&BIO_FLAGS_UPLINK)
UP_fflush(b->ptr);
else
fflush((FILE *)b->ptr);
break;
case BIO_CTRL_DUP:
ret=1;
break;
case BIO_CTRL_WPENDING:
case BIO_CTRL_PENDING:
case BIO_CTRL_PUSH:
case BIO_CTRL_POP:
default:
ret=0;
break;
}
return(ret);
}
开发者ID:SRI-CSL,项目名称:ENCODERS,代码行数:101,代码来源:bss_file.c
示例5: ASN1_mbstring_ncopy
int ASN1_mbstring_ncopy(ASN1_STRING **out, const unsigned char *in, int len,
int inform, unsigned long mask,
long minsize, long maxsize)
{
int str_type;
int ret;
char free_out;
int outform, outlen = 0;
ASN1_STRING *dest;
unsigned char *p;
int nchar;
char strbuf[32];
int (*cpyfunc)(unsigned long,void *) = NULL;
if(len == -1) len = strlen((const char *)in);
if(!mask) mask = DIRSTRING_TYPE;
/* First do a string check and work out the number of characters */
switch(inform) {
case MBSTRING_BMP:
if(len & 1) {
ASN1err(ASN1_F_ASN1_MBSTRING_NCOPY,
ASN1_R_INVALID_BMPSTRING_LENGTH);
return -1;
}
nchar = len >> 1;
break;
case MBSTRING_UNIV:
if(len & 3) {
ASN1err(ASN1_F_ASN1_MBSTRING_NCOPY,
ASN1_R_INVALID_UNIVERSALSTRING_LENGTH);
return -1;
}
nchar = len >> 2;
break;
case MBSTRING_UTF8:
nchar = 0;
/* This counts the characters and does utf8 syntax checking */
ret = traverse_string(in, len, MBSTRING_UTF8, in_utf8, &nchar);
if(ret < 0) {
ASN1err(ASN1_F_ASN1_MBSTRING_NCOPY,
ASN1_R_INVALID_UTF8STRING);
return -1;
}
break;
case MBSTRING_ASC:
nchar = len;
break;
default:
ASN1err(ASN1_F_ASN1_MBSTRING_NCOPY, ASN1_R_UNKNOWN_FORMAT);
return -1;
}
if((minsize > 0) && (nchar < minsize)) {
ASN1err(ASN1_F_ASN1_MBSTRING_NCOPY, ASN1_R_STRING_TOO_SHORT);
BIO_snprintf(strbuf, sizeof strbuf, "%ld", minsize);
ERR_add_error_data(2, "minsize=", strbuf);
return -1;
}
if((maxsize > 0) && (nchar > maxsize)) {
ASN1err(ASN1_F_ASN1_MBSTRING_NCOPY, ASN1_R_STRING_TOO_LONG);
BIO_snprintf(strbuf, sizeof strbuf, "%ld", maxsize);
ERR_add_error_data(2, "maxsize=", strbuf);
return -1;
}
/* Now work out minimal type (if any) */
if(traverse_string(in, len, inform, type_str, &mask) < 0) {
ASN1err(ASN1_F_ASN1_MBSTRING_NCOPY, ASN1_R_ILLEGAL_CHARACTERS);
return -1;
}
/* Now work out output format and string type */
outform = MBSTRING_ASC;
if(mask & B_ASN1_PRINTABLESTRING) str_type = V_ASN1_PRINTABLESTRING;
else if(mask & B_ASN1_IA5STRING) str_type = V_ASN1_IA5STRING;
else if(mask & B_ASN1_T61STRING) str_type = V_ASN1_T61STRING;
else if(mask & B_ASN1_BMPSTRING) {
str_type = V_ASN1_BMPSTRING;
outform = MBSTRING_BMP;
} else if(mask & B_ASN1_UNIVERSALSTRING) {
str_type = V_ASN1_UNIVERSALSTRING;
outform = MBSTRING_UNIV;
} else {
str_type = V_ASN1_UTF8STRING;
outform = MBSTRING_UTF8;
}
if(!out) return str_type;
if(*out) {
free_out = 0;
dest = *out;
if(dest->data) {
dest->length = 0;
OPENSSL_free(dest->data);
//.........这里部分代码省略.........
开发者ID:millken,项目名称:zhuxianB30,代码行数:101,代码来源:a_mbstr.c
示例6: UI_set_result
int UI_set_result(UI *ui, UI_STRING *uis, const char *result)
{
int l = strlen(result);
ui->flags &= ~UI_FLAG_REDOABLE;
if (!uis)
return -1;
switch (uis->type) {
case UIT_PROMPT:
case UIT_VERIFY:
{
char number1[DECIMAL_SIZE(uis->_.string_data.result_minsize) + 1];
char number2[DECIMAL_SIZE(uis->_.string_data.result_maxsize) + 1];
BIO_snprintf(number1, sizeof(number1), "%d",
uis->_.string_data.result_minsize);
BIO_snprintf(number2, sizeof(number2), "%d",
uis->_.string_data.result_maxsize);
if (l < uis->_.string_data.result_minsize) {
ui->flags |= UI_FLAG_REDOABLE;
UIerr(UI_F_UI_SET_RESULT, UI_R_RESULT_TOO_SMALL);
ERR_add_error_data(5, "You must type in ",
number1, " to ", number2, " characters");
return -1;
}
if (l > uis->_.string_data.result_maxsize) {
ui->flags |= UI_FLAG_REDOABLE;
UIerr(UI_F_UI_SET_RESULT, UI_R_RESULT_TOO_LARGE);
ERR_add_error_data(5, "You must type in ",
number1, " to ", number2, " characters");
return -1;
}
}
if (!uis->result_buf) {
UIerr(UI_F_UI_SET_RESULT, UI_R_NO_RESULT_BUFFER);
return -1;
}
BUF_strlcpy(uis->result_buf, result,
uis->_.string_data.result_maxsize + 1);
break;
case UIT_BOOLEAN:
{
const char *p;
if (!uis->result_buf) {
UIerr(UI_F_UI_SET_RESULT, UI_R_NO_RESULT_BUFFER);
return -1;
}
uis->result_buf[0] = '\0';
for (p = result; *p; p++) {
if (strchr(uis->_.boolean_data.ok_chars, *p)) {
uis->result_buf[0] = uis->_.boolean_data.ok_chars[0];
break;
}
if (strchr(uis->_.boolean_data.cancel_chars, *p)) {
uis->result_buf[0] = uis->_.boolean_data.cancel_chars[0];
break;
}
}
}
default:
break;
}
return 0;
}
开发者ID:375670450,项目名称:openssl,代码行数:70,代码来源:ui_lib.c
示例7: ENGINEerr
ENGINE *ENGINE_by_id(const char *id)
{
ENGINE *iterator;
char *load_dir = NULL;
if(id == NULL)
{
ENGINEerr(ENGINE_F_ENGINE_BY_ID,
ERR_R_PASSED_NULL_PARAMETER);
return NULL;
}
CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
iterator = engine_list_head;
while(iterator && (strcmp(id, iterator->id) != 0))
iterator = iterator->next;
if(iterator)
{
/* We need to return a structural reference. If this is an
* ENGINE type that returns copies, make a duplicate - otherwise
* increment the existing ENGINE's reference count. */
if(iterator->flags & ENGINE_FLAGS_BY_ID_COPY)
{
ENGINE *cp = ENGINE_new();
if(!cp)
iterator = NULL;
else
{
engine_cpy(cp, iterator);
iterator = cp;
}
}
else
{
iterator->struct_ref++;
engine_ref_debug(iterator, 0, 1)
}
}
CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
#if 0
if(iterator == NULL)
{
ENGINEerr(ENGINE_F_ENGINE_BY_ID,
ENGINE_R_NO_SUCH_ENGINE);
ERR_add_error_data(2, "id=", id);
}
return iterator;
#else
/* EEK! Experimental code starts */
if(iterator) return iterator;
/* Prevent infinite recusrion if we're looking for the dynamic engine. */
if (strcmp(id, "dynamic"))
{
#ifdef OPENSSL_SYS_VMS
if((load_dir = getenv("OPENSSL_ENGINES")) == 0) load_dir = "SSLROOT:[ENGINES]";
#else
if((load_dir = getenv("OPENSSL_ENGINES")) == 0) load_dir = ENGINESDIR;
#endif
iterator = ENGINE_by_id("dynamic");
if(!iterator || !ENGINE_ctrl_cmd_string(iterator, "ID", id, 0) ||
!ENGINE_ctrl_cmd_string(iterator, "DIR_LOAD", "2", 0) ||
!ENGINE_ctrl_cmd_string(iterator, "DIR_ADD",
load_dir, 0) ||
!ENGINE_ctrl_cmd_string(iterator, "LOAD", NULL, 0))
goto notfound;
return iterator;
}
notfound:
ENGINE_free(iterator);
ENGINEerr(ENGINE_F_ENGINE_BY_ID,ENGINE_R_NO_SUCH_ENGINE);
ERR_add_error_data(2, "id=", id);
return NULL;
/* EEK! Experimental code ends */
#endif
}
开发者ID:002301,项目名称:node,代码行数:73,代码来源:eng_list.c
示例8: ssl_module_init
static int ssl_module_init(CONF_IMODULE *md, const CONF *cnf)
{
size_t i, j, cnt;
int rv = 0;
const char *ssl_conf_section;
STACK_OF(CONF_VALUE) *cmd_lists;
ssl_conf_section = CONF_imodule_get_value(md);
cmd_lists = NCONF_get_section(cnf, ssl_conf_section);
if (sk_CONF_VALUE_num(cmd_lists) <= 0) {
if (cmd_lists == NULL)
SSLerr(SSL_F_SSL_MODULE_INIT, SSL_R_SSL_SECTION_NOT_FOUND);
else
SSLerr(SSL_F_SSL_MODULE_INIT, SSL_R_SSL_SECTION_EMPTY);
ERR_add_error_data(2, "section=", ssl_conf_section);
goto err;
}
cnt = sk_CONF_VALUE_num(cmd_lists);
ssl_names = OPENSSL_zalloc(sizeof(*ssl_names) * cnt);
ssl_names_count = cnt;
for (i = 0; i < ssl_names_count; i++) {
struct ssl_conf_name *ssl_name = ssl_names + i;
CONF_VALUE *sect = sk_CONF_VALUE_value(cmd_lists, i);
STACK_OF(CONF_VALUE) *cmds = NCONF_get_section(cnf, sect->value);
if (sk_CONF_VALUE_num(cmds) <= 0) {
if (cmds == NULL)
SSLerr(SSL_F_SSL_MODULE_INIT, SSL_R_SSL_COMMAND_SECTION_NOT_FOUND);
else
SSLerr(SSL_F_SSL_MODULE_INIT, SSL_R_SSL_COMMAND_SECTION_EMPTY);
ERR_add_error_data(4, "name=", sect->name, ", value=", sect->value);
goto err;
}
ssl_name->name = BUF_strdup(sect->name);
if (ssl_name->name == NULL)
goto err;
cnt = sk_CONF_VALUE_num(cmds);
ssl_name->cmds = OPENSSL_zalloc(cnt * sizeof(struct ssl_conf_cmd));
if (ssl_name->cmds == NULL)
goto err;
ssl_name->cmd_count = cnt;
for (j = 0; j < cnt; j++) {
const char *name;
CONF_VALUE *cmd_conf = sk_CONF_VALUE_value(cmds, j);
struct ssl_conf_cmd *cmd = ssl_name->cmds + j;
/* Skip any initial dot in name */
name = strchr(cmd_conf->name, '.');
if (name != NULL)
name++;
else
name = cmd_conf->name;
cmd->cmd = BUF_strdup(name);
cmd->arg = BUF_strdup(cmd_conf->value);
if (cmd->cmd == NULL || cmd->arg == NULL)
goto err;
}
}
rv = 1;
err:
if (rv == 0)
ssl_module_free(md);
return rv;
}
开发者ID:2007750219,项目名称:openssl,代码行数:62,代码来源:ssl_mcnf.c
示例9: file_ctrl
static long MS_CALLBACK file_ctrl(BIO *b, int cmd, long num, void *ptr)
{
long ret=1;
FILE *fp=(FILE *)b->ptr;
FILE **fpp;
char p[4];
switch (cmd)
{
case BIO_C_FILE_SEEK:
case BIO_CTRL_RESET:
ret=(long)fseek(fp,num,0);
break;
case BIO_CTRL_EOF:
ret=(long)feof(fp);
break;
case BIO_C_FILE_TELL:
case BIO_CTRL_INFO:
ret=ftell(fp);
break;
case BIO_C_SET_FILE_PTR:
file_free(b);
b->shutdown=(int)num&BIO_CLOSE;
b->ptr=(char *)ptr;
b->init=1;
#if defined(OPENSSL_SYS_WINDOWS)
if (num & BIO_FP_TEXT)
_setmode(fileno((FILE *)ptr),_O_TEXT);
else
_setmode(fileno((FILE *)ptr),_O_BINARY);
#elif defined(OPENSSL_SYS_MSDOS)
{
int fd = fileno((FILE*)ptr);
/* Set correct text/binary mode */
if (num & BIO_FP_TEXT)
_setmode(fd,_O_TEXT);
/* Dangerous to set stdin/stdout to raw (unless redirected) */
else
{
if (fd == STDIN_FILENO || fd == STDOUT_FILENO)
{
if (isatty(fd) <= 0)
_setmode(fd,_O_BINARY);
}
else
_setmode(fd,_O_BINARY);
}
}
#elif defined(OPENSSL_SYS_OS2)
if (num & BIO_FP_TEXT)
setmode(fileno((FILE *)ptr), O_TEXT);
else
setmode(fileno((FILE *)ptr), O_BINARY);
#endif
break;
case BIO_C_SET_FILENAME:
file_free(b);
b->shutdown=(int)num&BIO_CLOSE;
if (num & BIO_FP_APPEND)
{
if (num & BIO_FP_READ)
BUF_strlcpy(p,"a+",sizeof p);
else BUF_strlcpy(p,"a",sizeof p);
}
else if ((num & BIO_FP_READ) && (num & BIO_FP_WRITE))
BUF_strlcpy(p,"r+",sizeof p);
else if (num & BIO_FP_WRITE)
BUF_strlcpy(p,"w",sizeof p);
else if (num & BIO_FP_READ)
BUF_strlcpy(p,"r",sizeof p);
else
{
BIOerr(BIO_F_FILE_CTRL,BIO_R_BAD_FOPEN_MODE);
ret=0;
break;
}
#if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_OS2)
if (!(num & BIO_FP_TEXT))
strcat(p,"b");
else
strcat(p,"t");
#endif
fp=fopen(ptr,p);
if (fp == NULL)
{
SYSerr(SYS_F_FOPEN,get_last_sys_error());
ERR_add_error_data(5,"fopen('",ptr,"','",p,"')");
BIOerr(BIO_F_FILE_CTRL,ERR_R_SYS_LIB);
ret=0;
break;
}
b->ptr=(char *)fp;
b->init=1;
break;
case BIO_C_GET_FILE_PTR:
/* the ptr parameter is actually a FILE ** in this case. */
if (ptr != NULL)
{
fpp=(FILE **)ptr;
*fpp=(FILE *)b->ptr;
//.........这里部分代码省略.........
开发者ID:kevin-longkai,项目名称:edimax-br-6528n,代码行数:101,代码来源:bss_file.c
示例10: CAPIerr
static EVP_PKEY *capi_get_pkey(ENGINE *eng, CAPI_KEY *key)
{
unsigned char *pubkey = NULL;
DWORD len;
BLOBHEADER *bh;
RSA *rkey = NULL;
DSA *dkey = NULL;
EVP_PKEY *ret = NULL;
if (!CryptExportKey(key->key, 0, PUBLICKEYBLOB, 0, NULL, &len))
{
CAPIerr(CAPI_F_CAPI_GET_PKEY, CAPI_R_PUBKEY_EXPORT_LENGTH_ERROR);
capi_addlasterror();
return NULL;
}
pubkey = OPENSSL_malloc(len);
if (!pubkey)
goto memerr;
if (!CryptExportKey(key->key, 0, PUBLICKEYBLOB, 0, pubkey, &len))
{
CAPIerr(CAPI_F_CAPI_GET_PKEY, CAPI_R_PUBKEY_EXPORT_ERROR);
capi_addlasterror();
goto err;
}
bh = (BLOBHEADER *)pubkey;
if (bh->bType != PUBLICKEYBLOB)
{
CAPIerr(CAPI_F_CAPI_GET_PKEY, CAPI_R_INVALID_PUBLIC_KEY_BLOB);
goto err;
}
if (bh->aiKeyAlg == CALG_RSA_SIGN || bh->aiKeyAlg == CALG_RSA_KEYX)
{
RSAPUBKEY *rp;
DWORD rsa_modlen;
unsigned char *rsa_modulus;
rp = (RSAPUBKEY *)(bh + 1);
if (rp->magic != 0x31415352)
{
char magstr[10];
BIO_snprintf(magstr, 10, "%lx", rp->magic);
CAPIerr(CAPI_F_CAPI_GET_PKEY, CAPI_R_INVALID_RSA_PUBLIC_KEY_BLOB_MAGIC_NUMBER);
ERR_add_error_data(2, "magic=0x", magstr);
goto err;
}
rsa_modulus = (unsigned char *)(rp + 1);
rkey = RSA_new_method(eng);
if (!rkey)
goto memerr;
rkey->e = BN_new();
rkey->n = BN_new();
if (!rkey->e || !rkey->n)
goto memerr;
if (!BN_set_word(rkey->e, rp->pubexp))
goto memerr;
rsa_modlen = rp->bitlen / 8;
if (!lend_tobn(rkey->n, rsa_modulus, rsa_modlen))
goto memerr;
RSA_set_ex_data(rkey, rsa_capi_idx, key);
if (!(ret = EVP_PKEY_new()))
goto memerr;
EVP_PKEY_assign_RSA(ret, rkey);
rkey = NULL;
}
else if (bh->aiKeyAlg == CALG_DSS_SIGN)
{
DSSPUBKEY *dp;
DWORD dsa_plen;
unsigned char *btmp;
dp = (DSSPUBKEY *)(bh + 1);
if (dp->magic != 0x31535344)
{
char magstr[10];
BIO_snprintf(magstr, 10, "%lx", dp->magic);
CAPIerr(CAPI_F_CAPI_GET_PKEY, CAPI_R_INVALID_DSA_PUBLIC_KEY_BLOB_MAGIC_NUMBER);
ERR_add_error_data(2, "magic=0x", magstr);
goto err;
}
dsa_plen = dp->bitlen / 8;
btmp = (unsigned char *)(dp + 1);
dkey = DSA_new_method(eng);
if (!dkey)
goto memerr;
dkey->p = BN_new();
dkey->q = BN_new();
dkey->g = BN_new();
dkey->pub_key = BN_new();
if (!dkey->p || !dkey->q || !dkey->g || !dkey->pub_key)
goto memerr;
if (!lend_tobn(dkey->p, btmp, dsa_plen))
//.........这里部分代码省略.........
开发者ID:RafaelRMachado,项目名称:MinnowBoard,代码行数:101,代码来源:e_capi.c
示例11: capi_rsa_sign
int capi_rsa_sign(int dtype, const unsigned char *m, unsigned int m_len,
unsigned char *sigret, unsigned int *siglen, const RSA *rsa)
{
ALG_ID alg;
HCRYPTHASH hash;
DWORD slen;
unsigned int i;
int ret = -1;
CAPI_KEY *capi_key;
CAPI_CTX *ctx;
ctx = ENGINE_get_ex_data(rsa->engine, capi_idx);
CAPI_trace(ctx, "Called CAPI_rsa_sign()\n");
capi_key = RSA_get_ex_data(rsa, rsa_capi_idx);
if (!capi_key)
{
CAPIerr(CAPI_F_CAPI_RSA_SIGN, CAPI_R_CANT_GET_KEY);
return -1;
}
/* Convert the signature type to a CryptoAPI algorithm ID */
switch(dtype)
{
case NID_sha1:
alg = CALG_SHA1;
break;
case NID_md5:
alg = CALG_MD5;
break;
case NID_md5_sha1:
alg = CALG_SSL3_SHAMD5;
break;
default:
{
char algstr[10];
BIO_snprintf(algstr, 10, "%lx", dtype);
CAPIerr(CAPI_F_CAPI_RSA_SIGN, CAPI_R_UNSUPPORTED_ALGORITHM_NID);
ERR_add_error_data(2, "NID=0x", algstr);
return -1;
}
}
/* Create the hash object */
if(!CryptCreateHash(capi_key->hprov, alg, 0, 0, &hash))
{
CAPIerr(CAPI_F_CAPI_RSA_SIGN, CAPI_R_CANT_CREATE_HASH_OBJECT);
capi_addlasterror();
return -1;
}
/* Set the hash value to the value passed */
if(!CryptSetHashParam(hash, HP_HASHVAL, (unsigned char *)m, 0))
{
CAPIerr(CAPI_F_CAPI_RSA_SIGN, CAPI_R_CANT_SET_HASH_VALUE);
capi_addlasterror();
goto err;
}
/* Finally sign it */
slen = RSA_size(rsa);
if(!CryptSignHashA(hash, capi_key->keyspec, NULL, 0, sigret, &slen))
{
CAPIerr(CAPI_F_CAPI_RSA_SIGN, CAPI_R_ERROR_SIGNING_HASH);
capi_addlasterror();
goto err;
}
else
{
ret = 1;
/* Inplace byte reversal of signature */
for(i = 0; i < slen / 2; i++)
{
unsigned char c;
c = sigret[i];
sigret[i] = sigret[slen - i - 1];
sigret[slen - i - 1] = c;
}
*siglen = slen;
}
/* Now cleanup */
err:
CryptDestroyHash(hash);
return ret;
}
开发者ID:RafaelRMachado,项目名称:MinnowBoard,代码行数:93,代码来源:e_capi.c
示例12: capi_adderror
static void capi_adderror(DWORD err)
{
char errstr[10];
BIO_snprintf(errstr, 10, "%lX", err);
ERR_add_error_data(2, "Error code= 0x", errstr);
}
开发者ID:RafaelRMachado,项目名称:MinnowBoard,代码行数:6,代码来源:e_capi.c
示例13: BIO_lookup
/*-
* BIO_lookup - look up the node and service you want to connect to.
* @node: the node you want to connect to.
* @service: the service you want to connect to.
* @lookup_type: declare intent with the result, client or server.
* @family: the address family you want to use. Use AF_UNSPEC for any, or
* AF_INET, AF_INET6 or AF_UNIX.
* @socktype: The socket type you want to use. Can be SOCK_STREAM, SOCK_DGRAM
* or 0 for all.
* @res: Storage place for the resulting list of returned addresses
*
* This will do a lookup of the node and service that you want to connect to.
* It returns a linked list of different addresses you can try to connect to.
*
* When no longer needed you should call BIO_ADDRINFO_free() to free the result.
*
* The return value is 1 on success or 0 in case of error.
*/
int BIO_lookup(const char *host, const char *service,
enum BIO_lookup_type lookup_type,
int family, int socktype, BIO_ADDRINFO **res)
{
int ret = 0; /* Assume failure */
switch(family) {
case AF_INET:
#ifdef AF_INET6
case AF_INET6:
#endif
#ifdef AF_UNIX
case AF_UNIX:
#endif
#ifdef AF_UNSPEC
case AF_UNSPEC:
#endif
break;
default:
BIOerr(BIO_F_BIO_LOOKUP, BIO_R_UNSUPPORTED_PROTOCOL_FAMILY);
return 0;
}
#ifdef AF_UNIX
if (family == AF_UNIX) {
if (addrinfo_wrap(family, socktype, host, strlen(host), 0, res))
return 1;
else
BIOerr(BIO_F_BIO_LOOKUP, ERR_R_MALLOC_FAILURE);
return 0;
}
#endif
if (BIO_sock_init() != 1)
return 0;
if (1) {
int gai_ret = 0;
#ifdef AI_PASSIVE
struct addrinfo hints;
memset(&hints, 0, sizeof hints);
hints.ai_family = family;
hints.ai_socktype = socktype;
if (lookup_type == BIO_LOOKUP_SERVER)
hints.ai_flags |= AI_PASSIVE;
/* Note that |res| SHOULD be a 'struct addrinfo **' thanks to
* macro magic in bio_lcl.h
*/
switch ((gai_ret = getaddrinfo(host, service, &hints, res))) {
# ifdef EAI_SYSTEM
case EAI_SYSTEM:
SYSerr(SYS_F_GETADDRINFO, get_last_socket_error());
BIOerr(BIO_F_BIO_LOOKUP, ERR_R_SYS_LIB);
break;
# endif
case 0:
ret = 1; /* Success */
break;
default:
BIOerr(BIO_F_BIO_LOOKUP, ERR_R_SYS_LIB);
ERR_add_error_data(1, gai_strerror(gai_ret));
break;
}
} else {
#endif
const struct hostent *he;
/*
* Because struct hostent is defined for 32-bit pointers only with
* VMS C, we need to make sure that '&he_fallback_address' and
* '&he_fallback_addresses' are 32-bit pointers
*/
#if defined(OPENSSL_SYS_VMS) && defined(__DECC)
# pragma pointer_size save
# pragma pointer_size 32
#endif
/* Windows doesn't seem to have in_addr_t */
#ifdef OPENSSL_SYS_WINDOWS
static uint32_t he_fallback_address;
static const char *he_fallback_addresses[] =
//.........这里部分代码省略.........
开发者ID:Bloody99,项目名称:openssl,代码行数:101,代码来源:b_addr.c
示例14: addr_strings
/*-
* addr_strings - helper function to get host and service names
* @ap: the BIO_ADDR that has the input info
* @numeric: 0 if actual names should be returned, 1 if the numeric
* representation should be returned.
* @hostname: a pointer to a pointer to a memory area to store the
* host name or numeric representation. Unused if NULL.
* @service: a pointer to a pointer to a memory area to store the
* service name or numeric representation. Unused if NULL.
*
* The return value is 0 on failure, with the error code in the error
* stack, and 1 on success.
*/
static int addr_strings(const BIO_ADDR *ap, int numeric,
char **hostname, char **service)
{
if (BIO_sock_init() != 1)
return 0;
if (1) {
#ifdef AI_PASSIVE
int ret = 0;
char host[NI_MAXHOST] = "", serv[NI_MAXSERV] = "";
int flags = 0;
if (numeric)
flags |= NI_NUMERICHOST | NI_NUMERICSERV;
if ((ret = getnameinfo(BIO_ADDR_sockaddr(ap),
BIO_ADDR_sockaddr_size(ap),
host, sizeof(host), serv, sizeof(serv),
flags)) != 0) {
# ifdef EAI_SYSTEM
if (ret == EAI_SYSTEM) {
SYSerr(SYS_F_GETNAMEINFO, get_last_socket_error());
BIOerr(BIO_F_ADDR_STRINGS, ERR_R_SYS_LIB);
} else
# endif
{
BIOerr(BIO_F_ADDR_STRINGS, ERR_R_SYS_LIB);
ERR_add_error_data(1, gai_strerror(ret));
}
return 0;
}
/* VMS getnameinfo() has a bug, it doesn't fill in serv, which
* leaves it with whatever garbage that happens to be there.
* However, we initialise serv with the empty string (serv[0]
* is therefore NUL), so it gets real easy to detect when things
* didn't go the way one might expect.
*/
if (serv[0] == '\0') {
BIO_snprintf(serv, sizeof(serv), "%d",
ntohs(BIO_ADDR_rawport(ap)));
}
if (hostname != NULL)
*hostname = OPENSSL_strdup(host);
if (service != NULL)
*service = OPENSSL_strdup(serv);
} else {
#endif
if (hostname != NULL)
*hostname = OPENSSL_strdup(inet_ntoa(ap->s_in.sin_addr));
if (service != NULL) {
char serv[6]; /* port is 16 bits => max 5 decimal digits */
BIO_snprintf(serv, sizeof(serv), "%d", ntohs(ap->s_in.sin_port));
*service = OPENSSL_strdup(serv);
}
}
if ((hostname != NULL && *hostname == NULL)
|| (service != NULL && *service == NULL)) {
if (hostname != NULL) {
OPENSSL_free(*hostname);
*hostname = NULL;
}
if (service != NULL) {
OPENSSL_free(*service);
*service = NULL;
}
BIOerr(BIO_F_ADDR_STRINGS, ERR_R_MALLOC_FAILURE);
return 0;
}
return 1;
}
开发者ID:Bloody99,项目名称:openssl,代码行数:87,代码来源:b_addr.c
示例15: dtls1_read_bytes
//.........这里部分代码省略.........
/* now check if it's a missing record */
if (alert_descr == DTLS1_AD_MISSING_HANDSHAKE_MESSAGE) {
unsigned short seq;
unsigned int frag_off;
unsigned char *p = &(s->rlayer.d->alert_fragment[2]);
n2s(p, seq);
n2l3(p, frag_off);
dtls1_retransmit_message(s,
dtls1_get_queue_priority
(frag->msg_header.seq, 0), frag_off,
&found);
if (!found && SSL_in_init(s)) {
/*
* fprintf( stderr,"in init = %d\n", SSL_in_init(s));
*/
/*
* requested a message not yet sent, send an alert
* ourselves
*/
ssl3_send_alert(s, SSL3_AL_WARNING,
DTLS1_AD_MISSING_HANDSHAKE_MESSAGE);
}
}
#endif
} else if (alert_level == SSL3_AL_FATAL) {
char tmp[16];
s->rwstate = SSL_NOTHING;
s->s3->fatal_alert = alert_descr;
SSLerr(SSL_F_DTLS1_READ_BYTES, SSL_AD_REASON_OFFSET + alert_descr);
BIO_snprintf(tmp, sizeof tmp, "%d", alert_descr);
ERR_add_error_data(2, "SSL alert number ", tmp);
s->shutdown |= SSL_RECEIVED_SHUTDOWN;
SSL_CTX_remove_session(s->session_ctx, s->session);
return (0);
} else {
al = SSL_AD_ILLEGAL_PARAMETER;
SSLerr(SSL_F_DTLS1_READ_BYTES, SSL_R_UNKNOWN_ALERT_TYPE);
goto f_err;
}
goto start;
}
if (s->shutdown & SSL_SENT_SHUTDOWN) { /* but we have not received a
* shutdown */
s->rwstate = SSL_NOTHING;
SSL3_RECORD_set_length(rr, 0);
return (0);
}
if (SSL3_RECORD_get_type(rr) == SSL3_RT_CHANGE_CIPHER_SPEC) {
/*
* We can't process a CCS now, because previous handshake messages
* are still missing, so just drop it.
*/
SSL3_RECORD_set_length(rr, 0);
goto start;
}
/*
* Unexpected handshake message (Client Hello, or protocol violation)
*/
if ((s->rlayer.d->handshake_fragment_len >= DTLS1_HM_HEADER_LENGTH) &&
开发者ID:richsalz,项目名称:openssl,代码行数:67,代码来源:rec_layer_d1.c
示例16: conn_state
static int conn_state(BIO *b, BIO_CONNECT *c)
{
int ret= -1,i;
unsigned long l;
char *p,*q;
int (*cb)()=NULL;
if (c->info_callback != NULL)
cb=c->info_callback;
for (;;)
{
switch (c->state)
{
case BIO_CONN_S_BEFORE:
p=c->param_hostname;
if (p == NULL)
{
BIOerr(BIO_F_CONN_STATE,BIO_R_NO_HOSTNAME_SPECIFIED);
goto exit_loop;
}
for ( ; *p != '\0'; p++)
{
if ((*p == ':') || (*p == '/')) break;
}
i= *p;
if ((i == ':') || (i == '/'))
{
*(p++)='\0';
if (i == ':')
{
for (q=p; *q; q++)
if (*q == '/')
{
*q='\0';
break;
}
if (c->param_port != NULL)
OPENSSL_free(c->param_port);
c->param_port=BUF_strdup(p);
}
}
if (c->param_port == NULL)
{
BIOerr(BIO_F_CONN_STATE,BIO_R_NO_PORT_SPECIFIED);
ERR_add_error_data(2,"host=",c->param_hostname);
goto exit_loop;
}
c->state=BIO_CONN_S_GET_IP;
break;
case BIO_CONN_S_GET_IP:
if (BIO_get_host_ip(c->param_hostname,&(c->ip[0])) <= 0)
goto exit_loop;
c->state=BIO_CONN_S_GET_PORT;
break;
case BIO_CONN_S_GET_PORT:
if (c->param_port == NULL)
{
/* abort(); */
goto exit_loop;
}
else if (BIO_get_port(c->param_port,&c->port) <= 0)
goto exit_loop;
c->state=BIO_CONN_S_CREATE_SOCKET;
break;
case BIO_CONN_S_CREATE_SOCKET:
/* now setup address */
memset((char *)&c->them,0,sizeof(c->them));
c->them.sin_family=AF_INET;
c->them.sin_port=htons((unsigned short)c->port);
l=(unsigned long)
((unsigned long)c->ip[0]<<24L)|
((unsigned long)c->ip[1]<<16L)|
((unsigned long)c->ip[2]<< 8L)|
((unsigned long)c->ip[3]);
c->them.sin_addr.s_addr=htonl(l);
c->state=BIO_CONN_S_CREATE_SOCKET;
ret=socket(AF_INET,SOCK_STREAM,SOCKET_PROTOCOL);
if (ret == INVALID_SOCKET)
{
SYSerr(SYS_F_SOCKET,get_last_socket_error());
ERR_add_error_data(4,"host=",c->param_hostname,
":",c->param_port);
BIOerr(BIO_F_CONN_STATE,BIO_R_UNABLE_TO_CREATE_SOCKET);
goto exit_loop;
}
b->num=ret;
c->state=BIO_CONN_S_NBIO;
break;
case BIO_CONN_S_NBIO:
if (c->nbio)
{
//.........这里部分代码省略.........
开发者ID:aosm,项目名称:OpenSSL097,代码行数:101,代码来源:bss_conn.c
示例17: def_load_bio
//.........这里部分代码省略.........
ss = p;
goto again;
}
CONFerr(CONF_F_DEF_LOAD_BIO,
CONF_R_MISSING_CLOSE_SQUARE_BRACKET);
goto err;
}
*end = '\0';
if (!str_copy(conf, NULL, §ion, start))
goto err;
if ((sv = _CONF_get_section(conf, section)) == NULL)
sv = _CONF_new_section(conf, section);
if (sv == NULL) {
CONFerr(CONF_F_DEF_LOAD_BIO,
CONF_R_UNABLE_TO_CREATE_NEW_SECTION);
goto err;
}
continue;
} else {
pname = s;
|
请发表评论