• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号

C++ EVP_cleanup函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中EVP_cleanup函数的典型用法代码示例。如果您正苦于以下问题:C++ EVP_cleanup函数的具体用法?C++ EVP_cleanup怎么用?C++ EVP_cleanup使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了EVP_cleanup函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: main


//.........这里部分代码省略.........
					errorlog("ERROR: Can't exec fork().");
					break;

				case 0:	// in child
					logtitle = malloc((strlen(config.cap[i]->title)+24) * sizeof(char));
					parent = 0;
					capindex = i;
				
					sprintf(logtitle, "viewssl daemon child [%s]", config.cap[capindex]->title);

					openlog(logtitle, LOG_PID, LOG_DAEMON);
					syslog(LOG_NOTICE,"started at %s",gettime());
					break;

				default: // in parent
					childs.pid[childs.index] = pid;
					childs.title[childs.index] = malloc((strlen(config.cap[childs.index]->title)+1)*sizeof(char));
					strcpy(childs.title[childs.index],config.cap[childs.index]->title);
					childs.index++;
					break;
			} // switch(pid)

			if (!parent)
				break;
		} // for (i=0;i<config.index;i++)

		signal(SIGTERM, fsignal);
		signal(SIGINT, fsignal);
		signal(SIGQUIT, fsignal);


		if (parent)
		{ // in parent
			struct	sockaddr_un uds_addr;
			struct  sockaddr_un cl_addr;

			int		ss=0, r=0;	// master services socket

			// Master
			openlog("viewssl daemon master", LOG_PID, LOG_DAEMON);
			syslog(LOG_NOTICE, "started at %s", gettime());
			
			ss = socket(PF_UNIX, SOCK_STREAM, 0);
			if (ss < 0)
				errorlog("socket() error.");

			
			memset(&uds_addr, 0, sizeof(uds_addr));
			uds_addr.sun_family = AF_UNIX;
			strcpy(uds_addr.sun_path,SOCKPATH);
			
			unlink (SOCKPATH);
			
			r = bind(ss, (struct sockaddr *)&uds_addr, sizeof(uds_addr));
			if (r < 0)
				errorlog("bind() error.");
			
			r = listen(ss, 10);
			if (r < 0)
				errorlog("listen() error.");
			
			while(1)
			{
				int	cons=0;
				socklen_t cl_addr_len=0;

				memset (&cl_addr, 0, sizeof(cl_addr));
				cons = accept(ss, (struct sockaddr*) &cl_addr, &cl_addr_len);
				close(cons);
			}

			close(ss);
			unlink (SOCKPATH);
			exit(EXIT_SUCCESS);	// end master

		} else // child
		{
			signal(SIGCHLD, fsignal);
		}
		
	} // if (config.index > 1)
	else
	{ // one thread
		openlog("viewssl daemon", LOG_PID, LOG_DAEMON);
	}
	
	SSL_library_init();
	OpenSSL_add_all_ciphers();
	OpenSSL_add_all_digests();

	rc = proceed();

	EVP_cleanup();
	CRYPTO_cleanup_all_ex_data();

	if (rc != 0)
		exit(EXIT_FAILURE);
	else
		exit(EXIT_SUCCESS);	// end childs
}
开发者ID:Jonnyliu,项目名称:viewssld,代码行数:101,代码来源:viewssld.c


示例2: fopen

unsigned char * AesFileEnc::key ( )
{
	FILE* keystore;
	keystore = fopen(this->keystore_path, "r");
	unsigned char *iv = this->iv(32);
	unsigned char* key = new unsigned char[32];
	const char *prompt;
	prompt = getpass("Your password to keystore: " );
	unsigned char* sha;
   sha = SHA256(reinterpret_cast<const unsigned char*>(prompt), 32, NULL); //uwaga
   //printf("SHA %s aaa",(char *)sha);
	delete prompt;
	

  ERR_load_crypto_strings();
  OpenSSL_add_all_algorithms();
  OPENSSL_config(NULL);
  
	if(keystore == NULL)
	{
		keystore = fopen(this->keystore_path, "w+");
		std::cout<<this->keystore_path;
		srand(time(0));
		int j;
		char *buffer;
		buffer = new char;
		for(int i = 0 ; i<32; i++)
		{
			j = (int)(rand() / (RAND_MAX + 1.0) * 16);		
			sprintf(buffer,"%x",j);
			key[i] = *buffer;
		}
		 delete(buffer);

  unsigned char ciphertext[512];

  int ciphertext_len;

  ciphertext_len = this->encrypt (key, 32, sha, iv,
                            ciphertext);
	fprintf(keystore, "%s" ,(const char *)ciphertext);	
	//printf("KLUCZ zapisywany:%s KKK   %i" ,(const char *)ciphertext, ciphertext_len);	
}
else{

  unsigned char * decryptedtext = new unsigned char[512];
  unsigned char* keycipher = new unsigned char[512];
  int ciphertext_len = 0;
  int buff;
  while((buff = getc(keystore))!= EOF)
	{
		keycipher[ciphertext_len] = (unsigned char)buff;
		ciphertext_len++;
	}
	ciphertext_len--;
  //fscanf(keystore, "%512c", keycipher);
  int decryptedtext_len;
	//printf("KLUCZ wczytany:%s KKK   %i" ,(const char *)keycipher, ciphertext_len);	


  decryptedtext_len = decrypt(keycipher, ciphertext_len, sha, iv,
    decryptedtext);
  key = ( unsigned char *)decryptedtext;
}

  unsigned char* KEY;
  KEY = new unsigned char[this->keyLength];
  KEY[this->keyLength] = '\0';
  printf("%s        PIES \n",KEY);
  for(int i =0; i<this->keyLength; i++)
	{KEY[i] = key[i];}

  //delete(key);
  //delete(sha);
    	//std::cout << "tutajkhjghjfghyt" <<std::endl;
  fclose(keystore);
  //std::cout<<this->keyLength <<std::endl;
   //printf("KLUCZ %s",KEY);
  std::cout << (const char *)KEY<<"PIES"<<std::endl;
    std::cout <<key<<"PIES"<<std::endl;
   EVP_cleanup();
  ERR_free_strings();
  return KEY;
	}
开发者ID:MichalKupczynski,项目名称:kryptografia,代码行数:84,代码来源:AesFileEnc.cpp


示例3: finalizeDigiDocLib

//--------------------------------------------------
// cleanup of DigiDoc library
//--------------------------------------------------
EXP_OPTION void finalizeDigiDocLib()
{
    ERR_free_strings();
    EVP_cleanup();
}
开发者ID:Krabi,项目名称:idkaart_public,代码行数:8,代码来源:DigiDocLib.c


示例4: main

int main(int argc, char *argv[]) {

  unsigned int bundleLength=0, urlLength=0;

  if (argc == 3) {
    printf("UNSUPPORTED\n");  //for now at least
    return EXIT_SUCCESS;
  } else if (argc != 4) {
    printf("usage: %s <host> <port> <ca-bundle>\n", argv[0]);
    return EXIT_FAILURE;
  } else if ((urlLength = strlen(argv[1]) + strlen(argv[2]) + 2) > MAX_LENGTH) {
    printf("Too long URL: %d characters, max: %d\n", urlLength, MAX_LENGTH);
    return EXIT_FAILURE;
  } else if ((bundleLength = strlen(argv[3]) + 1) > MAX_LENGTH) {
    printf("Too long ca-bundle filepath: %d characters, max: %d\n", bundleLength, MAX_LENGTH);
    return EXIT_FAILURE;
  }

  char url[1024];       snprintf(url, sizeof(url), "%s:%s", argv[1], argv[2]);
  char ca_bundle[1024]; memcpy(ca_bundle, argv[3], bundleLength);
  int exitvalue = 0;

  BIO *sbio;
  SSL_CTX *ssl_ctx;
  SSL *ssl;
  X509 *cert;

  const char *servername = NULL;
  X509_VERIFY_PARAM *param = NULL;

  SSL_load_error_strings();
  SSL_library_init();

  ssl_ctx = SSL_CTX_new(TLS_method());  //if you are using an older version of openssl, you may need to change this into for example: TLSv1_2_client_method
  param = SSL_CTX_get0_param(ssl_ctx);

  //set certificate verify
  //https://wiki.openssl.org/index.php/Hostname_validation
  X509_VERIFY_PARAM_set_hostflags(param, X509_CHECK_FLAG_NO_PARTIAL_WILDCARDS);
  X509_VERIFY_PARAM_set1_host(param, argv[1], 0);
  SSL_CTX_set_verify(ssl_ctx, SSL_VERIFY_PEER, NULL);
  if (SSL_CTX_load_verify_locations(ssl_ctx, ca_bundle, NULL) != 1) {
    printf("Couldn't load certificate trust store\n");
    printf("%s\n", ERR_reason_error_string(ERR_get_error()));
    exitvalue=EXIT_FAILURE;
    goto end;
  }

  sbio = BIO_new_ssl_connect(ssl_ctx);
  BIO_get_ssl(sbio, &ssl);
  if (!ssl) {
    printf("Connection failed\n");
    printf("%s\n", ERR_reason_error_string(ERR_get_error()));
    exitvalue=EXIT_FAILURE;
    goto connect_end;
  }

  //handshake
  SSL_set_tlsext_host_name(ssl, url);
  BIO_set_conn_hostname(sbio, url);
  if(SSL_do_handshake(ssl) <= 0) {
    unsigned long int error = ERR_get_error();
    printf("%s\n", ERR_reason_error_string(error));
    printf("REJECT\n");
  } else {
    printf ("ACCEPT\n");
  }

connect_end:

  BIO_free_all(sbio);

end:

  SSL_CTX_free(ssl_ctx);
  EVP_cleanup();
  ERR_free_strings();

  return exitvalue;
}
开发者ID:ouspg,项目名称:trytls,代码行数:80,代码来源:run.c


示例5: libwebsocket_context_destroy

/**
 * libwebsocket_context_destroy() - Destroy the websocket context
 * @context:	Websocket context
 *
 *	This function closes any active connections and then frees the
 *	context.  After calling this, any further use of the context is
 *	undefined.
 */
LWS_VISIBLE void
libwebsocket_context_destroy(struct libwebsocket_context *context)
{
	int n;
	struct libwebsocket_protocols *protocol = context->protocols;

#ifdef LWS_LATENCY
	if (context->worst_latency_info[0])
		lwsl_notice("Worst latency: %s\n", context->worst_latency_info);
#endif

	for (n = 0; n < context->fds_count; n++) {
		struct libwebsocket *wsi =
					context->lws_lookup[context->fds[n].fd];
		if (!wsi)
			continue;
		libwebsocket_close_and_free_session(context,
			wsi, LWS_CLOSE_STATUS_NOSTATUS /* no protocol close */);
		n--;
	}

	/*
	 * give all extensions a chance to clean up any per-context
	 * allocations they might have made
	 */
	if (context->listen_port) {
		if (lws_ext_callback_for_each_extension_type(context, NULL,
			 LWS_EXT_CALLBACK_SERVER_CONTEXT_DESTRUCT, NULL, 0) < 0)
			return;
	} else
		if (lws_ext_callback_for_each_extension_type(context, NULL,
			 LWS_EXT_CALLBACK_CLIENT_CONTEXT_DESTRUCT, NULL, 0) < 0)
			return;

	/*
	 * inform all the protocols that they are done and will have no more
	 * callbacks
	 */

	while (protocol->callback) {
		protocol->callback(context, NULL, LWS_CALLBACK_PROTOCOL_DESTROY,
				NULL, NULL, 0);
		protocol++;
	}

	lws_plat_context_early_destroy(context);

#ifdef LWS_OPENSSL_SUPPORT
	if (context->ssl_ctx)
		SSL_CTX_free(context->ssl_ctx);
	if (context->ssl_client_ctx)
		SSL_CTX_free(context->ssl_client_ctx);

	ERR_remove_state(0);
	ERR_free_strings();
	EVP_cleanup();
	CRYPTO_cleanup_all_ex_data();
#endif

	if (context->fds)
		free(context->fds);
	if (context->lws_lookup)
		free(context->lws_lookup);

	free(context);

	lws_plat_context_late_destroy(context);
}
开发者ID:hoangtuanbs,项目名称:libwebsockets,代码行数:76,代码来源:context.c


示例6: Init_openssl


//.........这里部分代码省略.........
 *   puts ssl_client.gets
 *
 * If the server certificate is invalid or <tt>context.ca_file</tt> is not set
 * when verifying peers an OpenSSL::SSL::SSLError will be raised.
 *
 */
void
Init_openssl(void)
{
    /*
     * Init timezone info
     */
#if 0
    tzset();
#endif

    /*
     * Init all digests, ciphers
     */
    /* CRYPTO_malloc_init(); */
    /* ENGINE_load_builtin_engines(); */
    OpenSSL_add_ssl_algorithms();
    OpenSSL_add_all_algorithms();
    ERR_load_crypto_strings();
    SSL_load_error_strings();

    /*
     * FIXME:
     * On unload do:
     */
#if 0
    CONF_modules_unload(1);
    destroy_ui_method();
    EVP_cleanup();
    ENGINE_cleanup();
    CRYPTO_cleanup_all_ex_data();
    ERR_remove_state(0);
    ERR_free_strings();
#endif

    /*
     * Init main module
     */
    mOSSL = rb_define_module("OpenSSL");
    rb_global_variable(&mOSSL);

    /*
     * OpenSSL ruby extension version
     */
    rb_define_const(mOSSL, "VERSION", rb_str_new2(OSSL_VERSION));

    /*
     * Version of OpenSSL the ruby OpenSSL extension was built with
     */
    rb_define_const(mOSSL, "OPENSSL_VERSION", rb_str_new2(OPENSSL_VERSION_TEXT));

    /*
     * Version of OpenSSL the ruby OpenSSL extension is running with
     */
    rb_define_const(mOSSL, "OPENSSL_LIBRARY_VERSION", rb_str_new2(SSLeay_version(SSLEAY_VERSION)));

    /*
     * Version number of OpenSSL the ruby OpenSSL extension was built with
     * (base 16)
     */
    rb_define_const(mOSSL, "OPENSSL_VERSION_NUMBER", INT2NUM(OPENSSL_VERSION_NUMBER));
开发者ID:DashYang,项目名称:sim,代码行数:67,代码来源:ossl.c


示例7: hcrypt_library_exit

void hcrypt_library_exit(void)
{
	ERR_free_strings();
	EVP_cleanup();
}
开发者ID:sara62,项目名称:hcrypt,代码行数:5,代码来源:hcrypt_lib.c


示例8: main


//.........这里部分代码省略.........

#ifdef SHOW_SPLASH
  if (!no_statistics) splash_screen();
#endif /* SHOW_SPLASH */

  if (!no_statistics) SAY("\x1b[H\x1b[J");
  else SAY(cLGN "[*] " cBRI "Scan in progress, please stay tuned...\n");

  /* Enter the crawler loop */
  while ((next_from_queue() && !stop_soon) || (!show_once++)) {

    u8 keybuf[8];

    u64 end_time;
    u64 run_time;
    struct timeval tv_tmp;

    gettimeofday(&tv_tmp, NULL);
    end_time = tv_tmp.tv_sec * 1000LL + tv_tmp.tv_usec / 1000;

    run_time = end_time - st_time;
    if (gtimeout > 0 && run_time && run_time/1000 > gtimeout) {
      DEBUG("* Stopping scan due to timeout\n");
      stop_soon = 1;
    }

    req_sec = (req_count - queue_cur / 1.15) * 1000 / (run_time + 1);

    if (no_statistics || ((loop_cnt++ % 100) && !show_once && idle == 0))
      continue;

    if (clear_screen) {
      SAY("\x1b[H\x1b[2J");
      clear_screen = 0;
    }

    SAY(cYEL "\x1b[H"
           "skipfish version " VERSION " by <[email protected]>\n\n"
           cBRI "  -" cPIN " %s " cBRI "-\n\n" cNOR, 
           allow_domains[0]);


    if (!display_mode) {
      http_stats(st_time);
      SAY("\n");
      database_stats();
    } else {
      http_req_list();
    }

    SAY("        \r");

    if (fread(keybuf, 1, sizeof(keybuf), stdin) > 0) {
      display_mode ^= 1;
      clear_screen = 1;
    }

  }

  gettimeofday(&tv, NULL);
  en_time = tv.tv_sec * 1000LL + tv.tv_usec / 1000;

  SAY("\n");

  if (stop_soon)
    SAY(cYEL "[!] " cBRI "Scan aborted by user, bailing out!" cNOR "\n");

  term.c_lflag |= ICANON;
  tcsetattr(0, TCSANOW, &term);
  fcntl(0, F_SETFL, O_SYNC);

  save_keywords((u8*)wordlist);

  write_report(output_dir, en_time - st_time, seed);

#ifdef LOG_STDERR
  SAY("\n== PIVOT DEBUG ==\n");
  dump_pivots(0, 0);
  SAY("\n== END OF DUMP ==\n\n");
#endif /* LOG_STDERR */

  SAY(cLGN "[+] " cBRI "This was a great day for science!" cRST "\n\n");

#ifdef DEBUG_ALLOCATOR
  if (!stop_soon) {
    destroy_database();
    destroy_http();
    destroy_signatures();
    __TRK_report();
  }
#endif /* DEBUG_ALLOCATOR */

  fflush(0);

  EVP_cleanup();
  CRYPTO_cleanup_all_ex_data();

  return 0;

}
开发者ID:kyx114,项目名称:rapid,代码行数:101,代码来源:skipfish.c


示例9: main


//.........这里部分代码省略.........
    printf("                   e.g. 471C6ABB3CAD5CD41509F961EDD3A2E08E76F61FF6D63412B79E9D500257A06A\n\n");
    printf("    <iv>         - 128 bit initialisation vector to be used for the encryption represented as a 32 character hex string\n");
    printf("                   e.g. 743D32B3BEDEEAF5\n\n");
    exit(EXIT_FAILURE);
    }

    //Open the input file
    FILE *in = fopen(argv[1], "r");

    if (!in) {
        printf("Error! Could not open input file\n");
        exit(EXIT_FAILURE);
    }
    //Open the output file
    FILE *out = fopen(argv[2], "w");


    if (!out) {
        printf("Error! Could not open output file\n");
        exit(EXIT_FAILURE);
    }
    //Get key and iv
    if (get_key(argv[3], key) != 0 || get_iv(argv[4], iv) != 0) {
        printf("Error! Bad parameters\n");
        exit(EXIT_FAILURE);
    }
    //Prepare input buffer

    //Determine lenght of the input and allocate a buffer to store it.
    fseek(in, 0L, SEEK_END);
    plaintext_len = ftell(in);

    printf("length of plaintext: %d\n", plaintext_len);
    fseek(in, 0L, SEEK_SET);

    if (plaintext_len <= 0) {
        printf("Error! Input file is empty\n");
        exit(EXIT_FAILURE);
    }

    plaintext = malloc(sizeof(char) * plaintext_len);

    if (!plaintext) {
        printf("Error! Could not allocate memory for input buffer\n");
        exit(EXIT_FAILURE);
    }

    memset(plaintext, '\0', sizeof(char) * plaintext_len);

    //Read the file data into the input buffer
    fread(plaintext, 1, plaintext_len, in);


    //Prepare the output buffer 
    //Calculate the length of the input data in blocks (128 bit (32 bytes) for AES).
    rem = plaintext_len % AES_BLOCK_SIZE;
    num_of_blocks = (plaintext_len - rem) / AES_BLOCK_SIZE;

    if (rem != 0) {
        num_of_blocks++;    //Add an extra block as the the input data is not an exact multiple of blocks.
    }

    ciphertext_len = num_of_blocks * AES_BLOCK_SIZE;    //Total memory to allocate is num of blocks times block size

    printf("number of blocks: %d\ntotal buffer to allocate: %d\n",num_of_blocks, ciphertext_len);

    ciphertext = malloc(sizeof(char) * ciphertext_len);

    if (!ciphertext) {
        printf("Error! Could not allocate memory for output buffer\n");
        exit(EXIT_FAILURE);
    }

    memset(ciphertext, '\0', sizeof(char) * ciphertext_len);


    /* Encrypt the plaintext */
    ciphertext_len =
    encrypt(plaintext, plaintext_len, key, iv, ciphertext);

    printf("length of ciphertext: %d\n", ciphertext_len);

    for (i = 0; i < ciphertext_len; i++) {
        fwrite(&ciphertext[i], sizeof(unsigned char), 1, out);
    }

    sync();         //Force output flush

    free(plaintext);
    free(ciphertext);

    fclose(in);
    fclose(out);

    /* Clean up */
    EVP_cleanup();
    ERR_free_strings();

    return 0;
}
开发者ID:ktneale,项目名称:aes_demo_code,代码行数:101,代码来源:encrypt.c


示例10: main


//.........这里部分代码省略.........
  tvhftrace("main", channel_done);
  tvhftrace("main", bouquet_done);
  tvhftrace("main", dvr_done);
  tvhftrace("main", subscription_done);
  tvhftrace("main", access_done);
  tvhftrace("main", epg_done);
  tvhftrace("main", avahi_done);
  tvhftrace("main", bonjour_done);
  tvhftrace("main", imagecache_done);
  tvhftrace("main", lang_code_done);
  tvhftrace("main", api_done);

  tvhtrace("main", "tasklet enter");
  pthread_cond_signal(&tasklet_cond);
  pthread_join(tasklet_tid, NULL);
  tvhtrace("main", "tasklet thread end");
  tasklet_flush();
  tvhtrace("main", "tasklet leave");

  tvhftrace("main", hts_settings_done);
  tvhftrace("main", dvb_done);
  tvhftrace("main", lang_str_done);
  tvhftrace("main", esfilter_done);
  tvhftrace("main", profile_done);
  tvhftrace("main", intlconv_done);
  tvhftrace("main", urlparse_done);
  tvhftrace("main", idnode_done);
  tvhftrace("main", notify_done);
  tvhftrace("main", spawn_done);

  tvhlog(LOG_NOTICE, "STOP", "Exiting HTS Tvheadend");
  tvhlog_end();

  tvhftrace("main", config_done);

  if(opt_fork)
    unlink(opt_pidpath);
    
#if ENABLE_TSFILE
  free(opt_tsfile.str);
#endif
  free(opt_satip_xml.str);

  /* OpenSSL - welcome to the "cleanup" hell */
  ENGINE_cleanup();
  RAND_cleanup();
  CRYPTO_cleanup_all_ex_data();
  EVP_cleanup();
  CONF_modules_free();
#ifndef OPENSSL_NO_COMP
  COMP_zlib_cleanup();
#endif
  ERR_remove_state(0);
  ERR_free_strings();
#ifndef OPENSSL_NO_COMP
  sk_SSL_COMP_free(SSL_COMP_get_compression_methods());
#endif
  /* end of OpenSSL cleanup code */

#if ENABLE_DBUS_1
  extern void dbus_shutdown(void);
  if (opt_dbus) dbus_shutdown();
#endif
  tvh_gettext_done();
  return 0;
}

/**
 *
 */
void
tvh_str_set(char **strp, const char *src)
{
  free(*strp);
  *strp = src ? strdup(src) : NULL;
}


/**
 *
 */
int
tvh_str_update(char **strp, const char *src)
{
  if(src == NULL)
    return 0;
  free(*strp);
  *strp = strdup(src);
  return 1;
}


/**
 *
 */
void
scopedunlock(pthread_mutex_t **mtxp)
{
  pthread_mutex_unlock(*mtxp);
}
开发者ID:2crazyzgb,项目名称:tvheadend,代码行数:101,代码来源:main.c


示例11: main

main(int argc, char *argv[])
{
    EVP_MD_CTX *mdctx;
    EVP_MD_CTX *mdctxdup;
    const EVP_MD *md;
    const EVP_MD *mddup;
    char mess1[] = "Hello World";
    unsigned char md_value[EVP_MAX_MD_SIZE];
    unsigned char md_valuedup[EVP_MAX_MD_SIZE];
    int md_len,md_lendup, i;
    char originalBinary[24];
    char randomBinary[24];
    OpenSSL_add_all_digests();
    
    if(!argv[1]) {
        printf("Usage: mdtest digestname\n");
        exit(1);
    }
    
    md = EVP_get_digestbyname(argv[1]) ;
    
    if(!md) {
        printf("Unknown message digest %s\n", argv[1]);
        exit(1);
    }
   
    mdctx = EVP_MD_CTX_create();
    EVP_DigestInit_ex(mdctx, md, NULL);
    EVP_DigestUpdate(mdctx, mess1, strlen(mess1));
    EVP_DigestFinal_ex(mdctx, md_value, &md_len);
    EVP_MD_CTX_destroy(mdctx);
    
    printf("Input Original: %s\n",mess1);
    printf("Digest Original: ");
    for(i = 0; i < md_len; i++)
    printf("%02x", md_value[i]);
    printf("\n");
    
int dontExit =1;
char *str ;
    
  while(dontExit)
   {
    str = (char*)malloc(10);
    str = rand_string(str,9);
    mdctxdup = EVP_MD_CTX_create();
    EVP_DigestInit_ex(mdctxdup, md, NULL);
    EVP_DigestUpdate(mdctxdup, str, strlen(str));
    EVP_DigestFinal_ex(mdctxdup, md_valuedup, &md_lendup);
EVP_MD_CTX_destroy(mdctxdup);
    

     if((md_value[0] == md_valuedup[0]) &&  (md_value[1] == md_valuedup[1])  && (md_value[2] == md_valuedup[2]) )
	{
        
	break;
	}
    free(str);
    }
    printf("Input Random: %s\n",str);
    printf("Digest Random: ");
    for(i = 0; i < md_lendup; i++)
    printf("%02x", md_valuedup[i]);
    printf("\n");

    
    /* Call this once before exit. */
    EVP_cleanup();
    exit(0);
}
开发者ID:rkamath89,项目名称:csc566-ComputerSecurity,代码行数:70,代码来源:RandomText.c


示例12: main


//.........这里部分代码省略.........
      min_len = prefix_len + suffix_len + 1;
    }
  if(max_len < min_len)
    {
      fprintf(stderr, "Warning: maximum length (%u) is smaller than minimum length (%u). Setting maximum length to %u.\n\n", max_len, min_len, min_len);
      max_len = min_len;
    }

  /* Check header */
  fd = open(filename, O_RDONLY);
  if(fd == -1)
    {
      perror("open file");
      exit(EXIT_FAILURE);
    }
  memset(salt, 0, sizeof(salt));
  ret = read(fd, salt, 8);
  if(strncmp(salt, "Salted__", 8) != 0)
    {
      close(fd);
      fprintf(stderr, "Error: %s is not a salted openssl file.\n\n", filename);
      exit(EXIT_FAILURE);
    }

  /* Read salt */
  ret = read(fd, salt, 8);
  if(ret != 8)
    {
      close(fd);
      fprintf(stderr, "Error: could not read salt.\n\n");
      exit(EXIT_FAILURE);
    }

  /* Read encrypted data */
  ret = fstat(fd, &file_stats);
  data_len = file_stats.st_size - 16;
  data = (char *) malloc(data_len);
  if(data == NULL)
    {
      fprintf(stderr, "Error: memory allocation failed.\n\n");
      exit(EXIT_FAILURE);
    }
  for(i = 0; i < data_len;)
    {
      ret = read(fd, data + i, data_len - i);
      if(ret == -1)
        {
          close(fd);
          fprintf(stderr, "Error: could not read data.\n\n");
          exit(EXIT_FAILURE);
        }
      else if(ret > 0)
        i += ret;
    }
  close(fd);

  pthread_mutex_init(&found_password_lock, NULL);
  
  /* Start decryption threads */
  decryption_threads = (pthread_t *) malloc(nb_threads * sizeof(pthread_t));
  indexes = (unsigned int **) malloc(nb_threads * sizeof(unsigned int *));
  if((decryption_threads == NULL) || (indexes == NULL))
    {
      fprintf(stderr, "Error: memory allocation failed.\n\n");
      exit(EXIT_FAILURE);
    }
  for(i = 0; i < nb_threads; i++)
    {
      indexes[i] = (unsigned int *) malloc(2 * sizeof(unsigned int));
      if(indexes[i] == NULL)
        {
          fprintf(stderr, "Error: memory allocation failed.\n\n");
          exit(EXIT_FAILURE);
        }
      indexes[i][0] = i * (charset_len / nb_threads);
      if(i == nb_threads - 1)
        indexes[i][1] = charset_len - 1;
      else
        indexes[i][1] = (i + 1) * (charset_len / nb_threads) - 1;
      ret = pthread_create(&decryption_threads[i], NULL, &decryption_func, indexes[i]);
      if(ret != 0)
        {
          perror("decryption thread");
          exit(EXIT_FAILURE);
        }
    }

  for(i = 0; i < nb_threads; i++)
    {
      pthread_join(decryption_threads[i], NULL);
      free(indexes[i]);
    }
  free(indexes);
  free(decryption_threads);
  pthread_mutex_destroy(&found_password_lock);
  free(data);
  EVP_cleanup();

  exit(EXIT_SUCCESS);
}
开发者ID:essobi,项目名称:bruteforce-salted-openssl,代码行数:101,代码来源:bruteforce-salted-openssl.c


示例13: apn_ssl_free

void apn_ssl_free() {
    ERR_free_strings();
    EVP_cleanup();
}
开发者ID:edwiincao,项目名称:libcapn,代码行数:4,代码来源:apn_ssl.c


示例14: R_unload_openssl

void R_unload_openssl(DllInfo *info) {
  ERR_free_strings();
  EVP_cleanup();
}
开发者ID:cran,项目名称:openssl,代码行数:4,代码来源:onload.c


示例15: qore_cleanup

// NOTE: we do not cleanup in reverse initialization order
// the threading subsystem is deleted before the modules are
// unloaded in case there are any module-specific thread
// cleanup functions to be run...
void qore_cleanup() {
   // first delete all user modules
   QMM.delUser();

#ifdef _Q_WINDOWS 
   // do windows socket cleanup
   WSACleanup();
#endif

#ifdef HAVE_SIGNAL_HANDLING
   // stop signal manager
   QSM.del();
#endif

   // purge thread resources before deleting modules
   {
      ExceptionSink xsink;
      purge_thread_resources(&xsink);
   }

   // delete all loadable modules
   QMM.cleanup();

   // delete thread-local data
   delete_thread_local_data();

   // now free memory (like ARGV, QORE_ARGV, ENV, etc)
   delete_global_variables();

   // delete pseudo-methods
   pseudo_classes_del();

   // delete static system namespace after modules
   delete staticSystemNamespace;
#ifdef DEBUG
   staticSystemNamespace = 0;
#endif

   // delete default type values
   delete_qore_types();

   // delete threading infrastructure
   delete_qore_threads();

   // only perform openssl cleanup if not performed externally
   if (!qore_check_option(QLO_DISABLE_OPENSSL_CLEANUP)) {
      // cleanup openssl library
      ERR_free_strings();

      ENGINE_cleanup();
      EVP_cleanup();

      CONF_modules_finish();
      CONF_modules_free();
      CONF_modules_unload(1);

      CRYPTO_cleanup_all_ex_data();

      CRYPTO_set_id_callback(0);
      CRYPTO_set_locking_callback(0);

      // delete openssl locks
      for (mutex_vec_t::iterator i = q_openssl_mutex_list.begin(), e = q_openssl_mutex_list.end(); i != e; ++i)
	 delete *i;
   }
   printd(5, "qore_cleanup() exiting cleanly\n");
}
开发者ID:qorelanguage,项目名称:qore,代码行数:71,代码来源:qore-main.cpp


示例16: Init_openssl

/*
 * OSSL library init
 */
void
Init_openssl()
{
    /*
     * Init timezone info
     */
#if 0
    tzset();
#endif

    /*
     * Init all digests, ciphers
     */
    /* CRYPTO_malloc_init(); */
    /* ENGINE_load_builtin_engines(); */
    OpenSSL_add_ssl_algorithms();
    OpenSSL_add_all_algorithms();
    ERR_load_crypto_strings();
    SSL_load_error_strings();

    /*
     * FIXME:
     * On unload do:
     */
#if 0
    CONF_modules_unload(1);
    destroy_ui_method();
    EVP_cleanup();
    ENGINE_cleanup();
    CRYPTO_cleanup_all_ex_data();
    ERR_remove_state(0);
    ERR_free_strings();
#endif

    /*
     * Init main module
     */
    mOSSL = rb_define_module("OpenSSL");

    /*
     * Constants
     */
    rb_define_const(mOSSL, "VERSION", rb_str_new2(OSSL_VERSION));
    rb_define_const(mOSSL, "OPENSSL_VERSION", rb_str_new2(OPENSSL_VERSION_TEXT));
    rb_define_const(mOSSL, "OPENSSL_VERSION_NUMBER", INT2NUM(OPENSSL_VERSION_NUMBER));

    /*
     * Generic error,
     * common for all classes under OpenSSL module
     */
    eOSSLError = rb_define_class_under(mOSSL,"OpenSSLError",rb_eStandardError);

    /*
     * Verify callback Proc index for ext-data
     */
    if ((ossl_verify_cb_idx = X509_STORE_CTX_get_ex_new_index(0, "ossl_verify_cb_idx", 0, 0, 0)) < 0)
        ossl_raise(eOSSLError, "X509_STORE_CTX_get_ex_new_index");

    /*
     * Init debug core
     */
    dOSSL = Qfalse;
    rb_define_module_function(mOSSL, "debug", ossl_debug_get, 0);
    rb_define_module_function(mOSSL, "debug=", ossl_debug_set, 1);
    rb_define_module_function(mOSSL, "errors", ossl_get_errors, 0);

    /*
     * Get ID of to_der
     */
    ossl_s_to_der = rb_intern("to_der");

    /*
     * Init components
     */
    Init_ossl_bn();
    Init_ossl_cipher();
    Init_ossl_config();
    Init_ossl_digest();
    Init_ossl_hmac();
    Init_ossl_ns_spki();
    Init_ossl_pkcs12();
    Init_ossl_pkcs7();
    Init_ossl_pkcs5();
    Init_ossl_pkey();
    Init_ossl_rand();
    Init_ossl_ssl();
    Init_ossl_x509();
    Init_ossl_ocsp();
    Init_ossl_engine();
    Init_ossl_asn1();
}
开发者ID:BellyWong,项目名称:RubyCocos2D,代码行数:94,代码来源:ossl.c


示例17: main

int main(int argc, char *argv[]) {
	BIO *sbio;
	SSL_CTX *ssl_ctx;
	SSL *ssl;
	X509 *server_cert;

	// Initialize OpenSSL
	OpenSSL_add_all_algorithms();
	SSL_library_init();
	SSL_load_error_strings();

 	// Check OpenSSL PRNG
	if(RAND_status() != 1) {
		fprintf(stderr, "OpenSSL PRNG not seeded with enough data.");
		goto error_1;
	}

	ssl_ctx = SSL_CTX_new(TLSv1_client_method());
	
	// Enable certificate validation
	SSL_CTX_set_verify(ssl_ctx, SSL_VERIFY_PEER, NULL);
	// Configure the CA trust store to be used
	if (SSL_CTX_load_verify_locations(ssl_ctx, TRUSTED_CA_PATHNAME, NULL) != 1) {
		fprintf(stderr, "Couldn't load certificate trust store.\n");
		goto error_2;
	}

	// Only support secure cipher suites
	if (SSL_CTX_set_cipher_list(ssl_ctx, SECURE_CIPHER_LIST) != 1)
		goto error_2;

	// Create the SSL connection
	sbio = BIO_new_ssl_connect(ssl_ctx);
	BIO_get_ssl(sbio, &ssl); 
	if(!ssl) {
	  fprintf(stderr, "Can't locate SSL pointer\n");
		goto error_3;
	}

	// Do the SSL handshake
	BIO_set_conn_hostname(sbio, TARGET_SERVER);
	if(SSL_do_handshake(ssl) <= 0) {
		// SSL Handshake failed
		long verify_err = SSL_get_verify_result(ssl);
		if (verify_err != X509_V_OK) { 
			// It failed because the certificate chain validation failed
			fprintf(stderr, "Certificate chain validation failed: %s\n", X509_verify_cert_error_string(verify_err));
		}
		else {
			// It failed for another reason
			ERR_print_errors_fp(stderr);
		}
		goto error_3;
	}

	// Recover the server's certificate
	server_cert =  SSL_get_peer_certificate(ssl);
	if (server_cert == NULL) {
		// The handshake was successful although the server did not provide a certificate
		// Most likely using an insecure anonymous cipher suite... get out!
		goto error_4;
	}

	// Validate the hostname
	if (validate_hostname(TARGET_HOST, server_cert) != MatchFound) {
		fprintf(stderr, "Hostname validation failed.\n");
		goto error_5;
	}

	// Hostname validation succeeded; we can start sending data
	send_http_get_and_print(sbio);


error_5:
	X509_free(server_cert);

error_4:
	BIO_ssl_shutdown(sbio);

error_3:
	BIO_free_all(sbio);

error_2:
	SSL_CTX_free(ssl_ctx);

error_1: // OpenSSL cleanup
    EVP_cleanup();
    ERR_free_strings();

	return 0;
}
开发者ID:TrickyCat,项目名称:ssl-conservatory,代码行数:91,代码来源:test_client.c


示例18: daemon_delete

void 
daemon_delete(struct daemon* daemon)
{
	size_t i;
	if(!daemon)
		return;
	modstack_desetup(&daemon->mods, daemon->env);
	daemon_remote_delete(daemon->rc);
	for(i = 0; i < daemon->num_ports; i++)
		listening_ports_free(daemon->ports[i]);
	free(daemon->ports);
	listening_ports_free(daemon->rc_ports);
	if(daemon->env) {
		slabhash_delete(daemon->env->msg_cache);
		rrset_cache_delete(daemon->env->rrset_cache);
		infra_delete(daemon->env->infra_cache);
		edns_known_options_delete(daemon->env);
		auth_zones_delete(daemon->env->auth_zones);
	}
	ub_randfree(daemon->rand);
	alloc_clear(&daemon->superalloc);
	acl_list_delete(daemon->acl);
	free(daemon->chroot);
	free(daemon->pidfile);
	free(daemon->env);
#ifdef HAVE_SSL
	SSL_CTX_free((SSL_CTX*)daemon->listen_sslctx);
	SSL_CTX_free((SSL_CTX*)daemon->connect_sslctx);
#endif
	free(daemon);
#ifdef LEX_HAS_YYLEX_DESTROY
	/* lex cleanup */
	ub_c_lex_destroy();
#endif
	/* libcrypto cleanup */
#ifdef HAVE_SSL
#  if defined(USE_GOST) && defined(HAVE_LDNS_KEY_EVP_UNLOAD_GOST)
	sldns_key_EVP_unload_gost();
#  endif
#  if HAVE_DECL_SSL_COMP_GET_COMPRESSION_METHODS && HAVE_DECL_SK_SSL_COMP_POP_FREE
#    ifndef S_SPLINT_S
#      if OPENSSL_VERSION_NUMBER < 0x10100000
	sk_SSL_COMP_pop_free(comp_meth, (void(*)())CRYPTO_free);
#      endif
#    endif
#  endif
#  ifdef HAVE_OPENSSL_CONFIG
	EVP_cleanup();
#  if OPENSSL_VERSION_NUMBER < 0x10100000
	ENGINE_cleanup();
#  endif
	CONF_modules_free();
#  endif
#  ifdef HAVE_CRYPTO_CLEANUP_ALL_EX_DATA
	CRYPTO_cleanup_all_ex_data(); /* safe, no more threads right now */
#  endif
#  ifdef HAVE_ERR_FREE_STRINGS
	ERR_free_strings();
#  endif
#  if OPENSSL_VERSION_NUMBER < 0x10100000
	RAND_cleanup();
#  endif
#  if defined(HAVE_SSL) && defined(OPENSSL_THREADS) && !defined(THREADS_DISABLED)
	ub_openssl_lock_delete();
#  endif
#ifndef HAVE_ARC4RANDOM
	_ARC4_LOCK_DESTROY();
#endif
#elif defined(HAVE_NSS)
	NSS_Shutdown();
#endif /* HAVE_SSL or HAVE_NSS */
	checklock_stop();
#ifdef USE_WINSOCK
	if(WSACleanup() != 0) {
		log_err("Could not WSACleanup: %s", 
			wsa_strerror(WSAGetLastError()));
	}
#endif
}
开发者ID:jaredmcneill,项目名称:netbsd-src,代码行数:79,代码来源:daemon.c


示例19: main2

int main2(int argc, char **argv) {
	InitializeCriticalSection(&mutex);
	EnterCriticalSection(&mutex);
#endif
	char *priority = NULL;

	if(!detach()) {
		return 1;
	}

#ifdef HAVE_MLOCKALL

	/* Lock all pages into memory if requested.
	 * This has to be done after daemon()/fork() so it works for child.
	 * No need to do that in parent as it's very short-lived. */
	if(do_mlock && mlockall(MCL_CURRENT | MCL_FUTURE) != 0) {
		logger(LOG_ERR, "System call `%s' failed: %s", "mlockall",
			   strerror(errno));
		return 1;
	}

#endif

	/* Setup sockets and open device. */

	if(!setup_network()) {
		goto end;
	}

	/* Initiate all outgoing connections. */

	try_outgoing_connections();

	/* Change process priority */

	if(get_config_string(lookup_config(config_tree, "ProcessPriority"), &priority)) {
		if(!strcasecmp(priority, "Normal")) {
			if(setpriority(NORMAL_PRIORITY_CLASS) != 0) {
				logger(LOG_ERR, "System call `%s' failed: %s",
					   "setpriority", strerror(errno));
				goto end;
			}
		} else if(!strcasecmp(priority, "Low")) {
			if(setpriority(BELOW_NORMAL_PRIORITY_CLASS) != 0) {
				logger(LOG_ERR, "System call `%s' failed: %s",
					   "setpriority", strerror(errno));
				goto end;
			}
		} else if(!strcasecmp(priority, "High")) {
			if(setpriority(HIGH_PRIORITY_CLASS) != 0) {
				logger(LOG_ERR, "System call `%s' failed: %s",
					   "setpriority", strerror(errno));
				goto end;
			}
		} else {
			logger(LOG_ERR, "Invalid priority `%s`!", priority);
			goto end;
		}
	}

	/* drop privileges */
	if(!drop_privs()) {
		goto end;
	}

	/* Start main loop. It only exits when tinc is killed. */

	status = main_loop();

	/* Shutdown properly. */

	ifdebug(CONNECTIONS)
	devops.dump_stats();

	close_network_connections();

end:
	logger(LOG_NOTICE, "Terminating");

#ifndef HAVE_MINGW
	remove_pid(pidfilename);
#endif

	free(priority);

#if OPENSSL_VERSION_NUMBER < 0x10100000L
	EVP_cleanup();
	ERR_free_strings();
#ifndef OPENSSL_NO_ENGINE
	ENGINE_cleanup();
#endif
#endif

	exit_configuration(&config_tree);
	list_delete_list(cmdline_conf);
	free_names();

	return status;
}
开发者ID:seehuhn,项目名称:tinc,代码行数:99,代码来源:tincd.c


示例20: pki_shutdown

void pki_shutdown(void)
{
        EVP_cleanup();
}
开发者ID:LeeVidor,项目名称:kannel-mongodb,代码行数:4,代码来源:pki.c



注:本文中的EVP_cleanup函数示例整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ EVP_des_cbc函数代码示例发布时间:2022-05-30
下一篇:
C++ EVP_aes_256_cbc函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap