C++ EthernetHeader函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中EthernetHeader函数的典型用法代码示例。如果您正苦于以下问题：C++ EthernetHeader函数的具体用法？C++ EthernetHeader怎么用？C++ EthernetHeader使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了EthernetHeader函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: Antiphon

signed Antiphon (struct plc * plc, byte source [], byte target []) 

{
	struct channel * channel = (struct channel *)(plc->channel);
	struct message * message = (struct message *)(plc->message);

#ifndef __GNUC__
#pragma pack (push,1)
#endif

	struct __packed vs_fr_lbk_request 
	{
		struct ethernet_std ethernet;
		struct qualcomm_std qualcomm;
		uint8_t DURATION;
		uint8_t RESERVED;
		uint16_t LENGTH;
		uint8_t PACKET [1038];
	}
	* request = (struct vs_fr_lbk_request *) (message);

#ifndef __GNUC__
#pragma pack (pop)
#endif

	if (_allclr (plc->flags, PLC_SILENCE)) 
	{
		char sourcename [ETHER_ADDR_LEN * 3];
		char targetname [ETHER_ADDR_LEN * 3];
		hexdecode (source, ETHER_ADDR_LEN, sourcename, sizeof (sourcename));
		hexdecode (target, ETHER_ADDR_LEN, targetname, sizeof (targetname));
		fprintf (stderr, "%s %s %s\n", channel->ifname, sourcename, targetname);
	}
	memset (message, 0, sizeof (* message));
	EthernetHeader (&message->ethernet, source, channel->host, HOMEPLUG_MTYPE);
	QualcommHeader (&message->qualcomm, 0, (VS_FR_LBK | MMTYPE_REQ));
	request->DURATION = plc->timer;
	request->LENGTH = HTOLE16 (sizeof (request->PACKET));
	memset (request->PACKET, 0xA5, sizeof (request->PACKET));
	EthernetHeader (request->PACKET, target, source, ETHERTYPE_IP);
	plc->packetsize = sizeof (* request);
	if (SendMME (plc) <= 0) 
	{
		error (1, errno, CHANNEL_CANTSEND);
	}
	if (ReadMME (plc, 0, (VS_FR_LBK | MMTYPE_CNF)) <= 0) 
	{
		error (1, errno, CHANNEL_CANTREAD);
	}
	sleep (plc->timer);
	return (0);
}

开发者ID:tcdog001，项目名称:apv5sdk-v15，代码行数:52，代码来源:Antiphon.c

示例2: DefaultVLANIDs

static signed DefaultVLANIDs (struct plc * plc, struct item list [], unsigned items)

{
	struct channel * channel = (struct channel *)(plc->channel);
	struct message * message = (struct message *)(plc->message);

#ifndef __GNUC__
#pragma pack (push,1)
#endif

	struct __packed vs_forward_config_request
	{
		struct ethernet_hdr ethernet;
		struct qualcomm_hdr qualcomm;
		uint8_t RESERVED1;
		uint8_t MREQUEST;
		uint8_t MVERSION;
		uint32_t RESERVED2;
		uint16_t VLANID;
		uint16_t RESERVED3;
	}
	* request = (struct vs_forward_config_request *) (message);
	struct __packed vs_forward_config_confirm
	{
		struct ethernet_hdr ethernet;
		struct qualcomm_hdr qualcomm;
		uint8_t RESERVED1;
		uint8_t RESULTCODE;
		uint8_t OPERATION;
		uint8_t MVERSION;
		uint32_t RESERVED2;
	}
	* confirm = (struct vs_forward_config_confirm *) (message);

#ifndef __GNUC__
#pragma pack (pop)
#endif

	memset (message, 0, sizeof (* message));
	EthernetHeader (&request->ethernet, channel->peer, channel->host, channel->type);
	QualcommHeader (&request->qualcomm, 0, (VS_FORWARD_CONFIG | MMTYPE_REQ));
	request->MREQUEST = PLCFWD_SET;
	request->MVERSION = PLCFWD_VER;
	request->VLANID = HTOLE16 (list [0].VLANID [0]);
	plc->packetsize = (ETHER_MIN_LEN - ETHER_CRC_LEN);
	if (SendMME (plc) <= 0)
	{
		error (PLC_EXIT (plc), errno, CHANNEL_CANTSEND);
		return (-1);
	}
	while (ReadMME (plc, 0, (VS_FORWARD_CONFIG | MMTYPE_CNF)) > 0)
	{
		if (confirm->RESULTCODE)
		{
			Failure (plc, PLC_WONTDOIT);
			continue;
		}
	}
	return (0);
}

开发者ID:LucaBongiorni，项目名称:open-plc-utils，代码行数:60，代码来源:plcfwd.c

示例3: RemoteHosts

signed RemoteHosts (struct plc * plc)

{
	struct channel * channel = (struct channel *)(plc->channel);
	struct message * message = (struct message *)(plc->message);

#ifndef __GNUC__
#pragma pack (push,1)
#endif

	struct __packed vs_sw_ver_request
	{
		struct ethernet_hdr ethernet;
		struct qualcomm_hdr qualcomm;
	}
	* request = (struct vs_sw_ver_request *) (message);
	struct __packed vs_sw_ver_confirm
	{
		struct ethernet_hdr ethernet;
		struct qualcomm_hdr qualcomm;
		uint8_t MSTATUS;
		uint32_t NUMDEVICES;
		struct __packed
		{
			uint8_t MACADDRESS [ETHER_ADDR_LEN];
			uint8_t ENUMID;
		}
		DEVICE [1];
	}
	* confirm = (struct vs_sw_ver_confirm *) (message);

#ifndef __GNUC__
#pragma pack (pop)
#endif

	Request (plc, "Request Enumeration ID Table");
	memset (message, 0, sizeof (* message));
	EthernetHeader (&request->ethernet, channel->peer, channel->host, channel->type);
	QualcommHeader (&request->qualcomm, 0, (VS_EM_ID_TABLE | MMTYPE_REQ));
	plc->packetsize = (ETHER_MIN_LEN - ETHER_CRC_LEN);
	if (SendMME (plc) <= 0)
	{
		error (PLC_EXIT (plc), errno, CHANNEL_CANTSEND);
		return (-1);
	}
	while (ReadMME (plc, 0, (VS_EM_ID_TABLE | MMTYPE_CNF)) > 0)
	{
		unsigned count = LE32TOH (confirm->NUMDEVICES);
		if (confirm->MSTATUS)
		{
			Failure (plc, PLC_WONTDOIT);
			continue;
		}
		while (count--)
		{
			hexout (confirm->DEVICE [count].MACADDRESS, ETHER_ADDR_LEN, ':', count? ' ': '\n', stdout);
		}
	}
	return (0);
}

开发者ID:dvlemplgk，项目名称:open-plc-utils，代码行数:60，代码来源:RemoteHosts.c

示例4: mod_conn

static signed mod_conn (struct plc * plc, uint8_t TYPE, uint16_t CID) 

{
	struct channel * channel = (struct channel *)(plc->channel);
	struct message * message = (struct message *)(plc->message);

#ifndef __GNUC__
#pragma pack (push,1)
#endif

	struct __packed vs_mod_conn_req 
	{
		struct ethernet_std ethernet;
		struct qualcomm_std qualcomm;
		uint32_t REQ_ID;
		uint32_t RSVD;
		uint16_t CID;
		uint8_t MOD_CTRL;
	}
	* request = (struct vs_mod_conn_req *)(message);
	struct __packed vs_mod_conn_cnf 
	{
		struct ethernet_std ethernet;
		struct qualcomm_std qualcomm;
		uint32_t REQ_ID;
		uint8_t MSTATUS;
		uint16_t ERR_REC_CODE;
		uint32_t RSVD;
		uint16_t CID;
	}
	* confirm = (struct vs_mod_conn_cnf *)(message);

#ifndef __GNUC__
#pragma pack (pop)
#endif

	Request (plc, "COQOS modify connection");
	memset (message, 0, sizeof (* message));
	EthernetHeader (&request->ethernet, channel->peer, channel->host, HOMEPLUG_MTYPE);
	QualcommHeader (&request->qualcomm, 0, (VS_MOD_CONN | MMTYPE_REQ));
	plc->packetsize = (ETHER_MIN_LEN - ETHER_CRC_LEN);
	request->MOD_CTRL = TYPE;
	request->CID = CID;
	if (SendMME (plc) <= 0) 
	{
		error ((plc->flags & PLC_BAILOUT), errno, CHANNEL_CANTSEND);
		return (-1);
	}
	while (ReadMME (plc, 0, (VS_MOD_CONN | MMTYPE_CNF)) > 0) 
	{
		if (confirm->MSTATUS) 
		{
			Failure (plc, PLC_WONTDOIT);
			return (-1);
		}
		Confirm (plc, "%s connection %04X", (TYPE == ACTION_SPND)? "Suspended": "Resumed", CID);
	}
	return (0);
}

开发者ID:tcdog001，项目名称:apv5sdk-v15，代码行数:59，代码来源:coqos_mod.c

示例5: rel_conn

signed rel_conn (struct plc * plc, uint16_t CID)

{
	struct channel * channel = (struct channel *)(plc->channel);
	struct message * message = (struct message *)(plc->message);

#ifndef __GNUC__
#pragma pack (push,1)
#endif

	struct __packed vs_rel_conn_req
	{
		struct ethernet_hdr ethernet;
		struct qualcomm_hdr qualcomm;
		uint32_t REQ_ID;
		uint32_t RSVD;
		uint16_t CID;
	}
	* request = (struct vs_rel_conn_req *)(message);
	struct __packed vs_rel_conn_cnf
	{
		struct ethernet_hdr ethernet;
		struct qualcomm_hdr qualcomm;
		uint32_t REQ_ID;
		uint8_t MSTATUS;
		uint16_t ERR_REC_CODE;
		uint32_t RSVD;
	}
	* confirm = (struct vs_rel_conn_cnf *)(message);

#ifndef __GNUC__
#pragma pack (pop)
#endif

	Request (plc, "Release COQOS connection");
	memset (message, 0, sizeof (* message));
	EthernetHeader (&request->ethernet, channel->peer, channel->host, channel->type);
	QualcommHeader (&request->qualcomm, 0, (VS_CONN_REL | MMTYPE_REQ));
	plc->packetsize = (ETHER_MIN_LEN - ETHER_CRC_LEN);
	request->CID = CID;
	if (SendMME (plc) <= 0)
	{
		error (PLC_EXIT (plc), errno, CHANNEL_CANTSEND);
		return (-1);
	}
	while (ReadMME (plc, 0, (VS_CONN_REL | MMTYPE_CNF)) > 0)
	{
		if (confirm->MSTATUS)
		{
			Failure (plc, PLC_WONTDOIT);
			return (-1);
		}
		Confirm (plc, "Released %04X", CID);
	}
	return (0);
}

开发者ID:LucaBongiorni，项目名称:open-plc-utils，代码行数:56，代码来源:coqos_rel.c

示例6: Flash

signed Flash (struct int6k * int6k) 

{
	struct channel * channel = (struct channel *)(int6k->channel);
	struct message * message = (struct message *)(int6k->message);

#ifndef __GNUC__
#pragma pack (push,1)
#endif

	struct __packed vs_mod_nvm_request 
	{
		struct header_eth ethernet;
		struct header_int intellon;
		uint8_t MODULEID;
	}
	* request = (struct vs_mod_nvm_request *) (message);
	struct __packed vs_mod_nvm_confirm 
	{
		struct header_eth ethernet;
		struct header_int intellon;
		uint8_t MSTATUS;
		uint8_t MODULEID;
	}
	* confirm = (struct vs_mod_nvm_confirm *) (message);

#ifndef __GNUC__
#pragma pack (pop)
#endif

	Request (int6k, "Flash NVRAM");
	memset (message, 0, sizeof (struct message));
	EthernetHeader (&message->ethernet, channel->peer, channel->host);
	IntellonHeader (&message->intellon, (VS_MOD_NVM | MMTYPE_REQ));
	int6k->packetsize = ETHER_MIN_LEN;
	request->MODULEID = int6k->modulecode;
	if (SendMME (int6k) <= 0) 
	{
		error ((int6k->flags & INT6K_BAILOUT), ECANCELED, INT6K_CANTSEND);
		return (-1);
	}
	if (ReadMME (int6k, (VS_MOD_NVM | MMTYPE_CNF)) <= 0) 
	{
		error ((int6k->flags & INT6K_BAILOUT), ECANCELED, INT6K_CANTREAD);
		return (-1);
	}
	if (confirm->MSTATUS) 
	{
		Failure (int6k, INT6K_WONTDOIT);
		return (-1);
	}
	Confirm (int6k, "Flashing ...");
	return (0);
}

开发者ID:tcdog001，项目名称:apv5sdk-v15，代码行数:54，代码来源:FlashNVM.c

示例7: evse_cm_slac_match

signed evse_cm_slac_match (struct session * session, struct channel * channel, struct message * message)

{
	struct cm_slac_match_request * request = (struct cm_slac_match_request *) (message);
	struct cm_slac_match_confirm * confirm = (struct cm_slac_match_confirm *) (message);
	while (readmessage (channel, message, HOMEPLUG_MMV, (CM_SLAC_MATCH | MMTYPE_REQ)) > 0)
	{
		if (! memcmp (session->RunID, request->MatchVarField.RunID, sizeof (session->RunID)))
		{
			slac_debug (session, 0, __func__, "<-- CM_SLAC_MATCH.REQ");
			memcpy (session->PEV_ID, request->MatchVarField.PEV_ID, sizeof (session->PEV_ID));
			memcpy (session->PEV_MAC, request->MatchVarField.PEV_MAC, sizeof (session->PEV_MAC));
			memcpy (session->RunID, request->MatchVarField.RunID, sizeof (session->RunID));

#if SLAC_DEBUG

			if (_anyset (session->flags, SLAC_VERBOSE))
			{
				char string [256];
				slac_debug (session, 0, __func__, "CM_SLAC_MATCH.REQ.APPLICATION_TYPE %d", request->APPLICATION_TYPE);
				slac_debug (session, 0, __func__, "CM_SLAC_MATCH.REQ.SECURITY_TYPE %d", request->SECURITY_TYPE);
				slac_debug (session, 0, __func__, "CM_SLAC_MATCH.REQ.MVFLength %d", LE16TOH (request->MVFLength));
				slac_debug (session, 0, __func__, "CM_SLAC_MATCH.REQ.PEV_ID %s", HEXSTRING (string, request->MatchVarField.PEV_ID));
				slac_debug (session, 0, __func__, "CM_SLAC_MATCH.REQ.PEV_MAC %s", HEXSTRING (string, request->MatchVarField.PEV_MAC));
				slac_debug (session, 0, __func__, "CM_SLAC_MATCH.REQ.EVSE_ID %s", HEXSTRING (string, request->MatchVarField.EVSE_ID));
				slac_debug (session, 0, __func__, "CM_SLAC_MATCH.REQ.EVSE_MAC %s", HEXSTRING (string, request->MatchVarField.EVSE_MAC));
				slac_debug (session, 0, __func__, "CM_SLAC_MATCH.REQ.RunID %s", HEXSTRING (string, request->MatchVarField.RunID));
			}

#endif

			slac_debug (session, 0, __func__, "--> CM_SLAC_MATCH.CNF");
			memset (message, 0, sizeof (* message));
			EthernetHeader (& confirm->ethernet, session->PEV_MAC, channel->host, channel->type);
			HomePlugHeader1 (& confirm->homeplug, HOMEPLUG_MMV, (CM_SLAC_MATCH | MMTYPE_CNF));
			confirm->APPLICATION_TYPE = session->APPLICATION_TYPE;
			confirm->SECURITY_TYPE = session->SECURITY_TYPE;
			confirm->MVFLength = HTOLE16 (sizeof (confirm->MatchVarField));
			memcpy (confirm->MatchVarField.PEV_ID, session->PEV_ID, sizeof (confirm->MatchVarField.PEV_ID));
			memcpy (confirm->MatchVarField.PEV_MAC, session->PEV_MAC, sizeof (confirm->MatchVarField.PEV_MAC));
			memcpy (confirm->MatchVarField.EVSE_ID, session->EVSE_ID, sizeof (confirm->MatchVarField.EVSE_ID));
			memcpy (confirm->MatchVarField.EVSE_MAC, session->EVSE_MAC, sizeof (confirm->MatchVarField.EVSE_MAC));
			memcpy (confirm->MatchVarField.RunID, session->RunID, sizeof (confirm->MatchVarField.RunID));
			memcpy (confirm->MatchVarField.NID, session->NID, sizeof (confirm->MatchVarField.NID));
			memcpy (confirm->MatchVarField.NMK, session->NMK, sizeof (confirm->MatchVarField.NMK));
			if (sendmessage (channel, message, sizeof (* confirm)) <= 0)
			{
				return (slac_debug (session, 1, __func__, CHANNEL_CANTSEND));
			}
			return (0);
		}
	}
	return (slac_debug (session, session->exit, __func__, "<-- CM_SLAC_MATCH.REQ ?"));
}

开发者ID:LucaBongiorni，项目名称:open-plc-utils，代码行数:54，代码来源:evse_cm_slac_match.c

示例8: Classification

signed Classification (struct plc * plc, struct MMERule * rule) 

{
	struct channel * channel = (struct channel *)(plc->channel);
	struct message * message = (struct message *)(plc->message);

#ifndef __GNUC__
#pragma pack (push,1)
#endif

	struct __packed vs_classification_request 
	{
		struct ethernet_std ethernet;
		struct qualcomm_std qualcomm;
		struct MMERule rule;
	}
	* request = (struct vs_classification_request *)(message);
	struct __packed vs_classification_confirm 
	{
		struct ethernet_std ethernet;
		struct qualcomm_std qualcomm;
		uint8_t MSTATUS;
	}
	* confirm = (struct vs_classification_confirm *)(message);

#ifndef __GNUC__
#pragma pack (pop)
#endif

	Request (plc, "Set Classification Rules");
	memset (message, 0, sizeof (* message));
	EthernetHeader (&request->ethernet, channel->peer, channel->host, channel->type);
	QualcommHeader (&request->qualcomm, 0, (VS_CLASSIFICATION | MMTYPE_REQ));
	plc->packetsize = sizeof (struct vs_classification_request);
	memcpy (&request->rule, rule, sizeof (request->rule));
	if (SendMME (plc) <= 0) 
	{
		error ((plc->flags & PLC_BAILOUT), errno, CHANNEL_CANTSEND);
		return (-1);
	}
	if (ReadMME (plc, 0, (VS_CLASSIFICATION | MMTYPE_CNF)) <= 0) 
	{
		error ((plc->flags & PLC_BAILOUT), errno, CHANNEL_CANTREAD);
		return (-1);
	}
	if (confirm->MSTATUS) 
	{
		Failure (plc, PLC_WONTDOIT);
		return (-1);
	}
	Confirm (plc, "Setting ...");
	return (0);
}

开发者ID:RozzieD，项目名称:open-plc-utils，代码行数:53，代码来源:plcrule.c

示例9: FlashNVM

signed FlashNVM (struct plc * plc) 

{
	struct channel * channel = (struct channel *)(plc->channel);
	struct message * message = (struct message *)(plc->message);

#ifndef __GNUC__
#pragma pack (push,1)
#endif

	struct __packed vs_mod_nvm_request 
	{
		struct ethernet_std ethernet;
		struct qualcomm_std qualcomm;
		uint8_t MODULEID;
	}
	* request = (struct vs_mod_nvm_request *) (message);
	struct __packed vs_mod_nvm_confirm 
	{
		struct ethernet_std ethernet;
		struct qualcomm_std qualcomm;
		uint8_t MSTATUS;
		uint8_t MODULEID;
	}
	* confirm = (struct vs_mod_nvm_confirm *) (message);

#ifndef __GNUC__
#pragma pack (pop)
#endif

	Request (plc, "Flash device");
	memset (message, 0, sizeof (* message));
	EthernetHeader (&request->ethernet, channel->peer, channel->host, channel->type);
	QualcommHeader (&request->qualcomm, 0, (VS_MOD_NVM | MMTYPE_REQ));
	request->MODULEID = plc->module;
	plc->packetsize = (ETHER_MIN_LEN - ETHER_CRC_LEN);
	if (SendMME (plc) <= 0) 
	{
		error ((plc->flags & PLC_BAILOUT), errno, CHANNEL_CANTSEND);
		return (-1);
	}
	if (ReadMME (plc, 0, (VS_MOD_NVM | MMTYPE_CNF)) <= 0) 
	{
		error ((plc->flags & PLC_BAILOUT), errno, CHANNEL_CANTREAD);
		return (-1);
	}
	if (confirm->MSTATUS) 
	{
		Failure (plc, PLC_WONTDOIT);
		return (-1);
	}
	return (0);
}

开发者ID:RozzieD，项目名称:open-plc-utils，代码行数:53，代码来源:FlashNVM.c

示例10: HostActionIndicate

signed HostActionIndicate (struct plc * plc)

{
	struct channel * channel = (struct channel *)(plc->channel);
	struct message * message = (struct message *)(plc->message);

#ifndef __GNUC__
#pragma pack (push,1)
#endif

	struct __packed vs_host_action_ind
	{
		struct ethernet_hdr ethernet;
		struct qualcomm_hdr qualcomm;
		uint8_t MACTION;
		uint8_t MAJOR_VERSION;
		uint8_t MINOR_VERSION;
	}
	* indicate = (struct vs_host_action_ind *) (message);
	struct __packed vs_host_action_rsp
	{
		struct ethernet_hdr ethernet;
		struct qualcomm_hdr qualcomm;
		uint8_t MSTATUS;
	}
	* response = (struct vs_host_action_rsp *) (message);

#ifndef __GNUC__
#pragma pack (pop)
#endif

	Request (plc, "Start Host Action");
	memset (message, 0, sizeof (* message));
	EthernetHeader (&indicate->ethernet, channel->peer, channel->host, channel->type);
	QualcommHeader (&indicate->qualcomm, 0, (VS_HOST_ACTION | MMTYPE_IND));
	plc->packetsize = (ETHER_MIN_LEN - ETHER_CRC_LEN);
	indicate->MACTION = plc->action;
	if (SendMME (plc) <= 0)
	{
		error (PLC_EXIT (plc), errno, CHANNEL_CANTSEND);
		return (-1);
	}
	while (ReadMME (plc, 0, (VS_HOST_ACTION | MMTYPE_RSP)) > 0)
	{
		if (response->MSTATUS)
		{
			Failure (plc, PLC_WONTDOIT);
			continue;
		}
		Confirm (plc, "Start.");
	}
	return (0);
}

开发者ID:dvlemplgk，项目名称:open-plc-utils，代码行数:53，代码来源:HostActionIndicate.c

示例11: VersionInfo

signed VersionInfo (struct int6k * int6k) 

{
	extern const char * chipset [CHIPSETS+1];
	struct channel * channel = (struct channel *)(int6k->channel);
	struct message * message = (struct message *)(int6k->message);

#ifndef __GNUC__
#pragma pack (push,1)
#endif

	struct __packed vs_sw_ver_confirm 
	{
		struct header_eth ethernet;
		struct header_int intellon;
		uint8_t MSTATUS;
		uint8_t MDEVICEID;
		uint8_t MVERLENGTH;
		char MVERSION [INT6K_VERSTRING];
		uint8_t UPGRADEABLE;
		uint32_t MCOOKIE;
	}
	* confirm = (struct vs_sw_ver_confirm *) (message);

#ifndef __GNUC__
#pragma pack (pop)
#endif

	Request (int6k, "Request Version Information");
	memset (message, 0, sizeof (struct message));
	EthernetHeader (&message->ethernet, channel->peer, channel->host);
	IntellonHeader (&message->intellon, (VS_SW_VER | MMTYPE_REQ));
	int6k->packetsize = ETHER_MIN_LEN;
	if (SendMME (int6k) <= 0) 
	{
		error ((int6k->flags & INT6K_BAILOUT), ECANCELED, INT6K_CANTSEND);
		return (-1);
	}
	while (ReadMME (int6k, (VS_SW_VER | MMTYPE_CNF)) > 0) 
	{
		if (confirm->MSTATUS) 
		{
			Failure (int6k, INT6K_WONTDOIT);
			continue;
		}
		if (confirm->MDEVICEID > CHIPSETS) 
		{
			confirm->MDEVICEID = 0x00;
		}
		Display (int6k, "%s %s", chipset [confirm->MDEVICEID], confirm->MVERSION);
	}
	return (0);
}

开发者ID:tcdog001，项目名称:apv5sdk-v15，代码行数:53，代码来源:VersionInfo.c

示例12: VersionInfo1

signed VersionInfo1 (struct plc * plc) 

{
	struct channel * channel = (struct channel *)(plc->channel);
	struct message * message = (struct message *)(plc->message);

#ifndef __GNUC__
#pragma pack (push,1)
#endif

	struct __packed vs_sw_ver_request 
	{
		struct ethernet_std ethernet;
		struct qualcomm_std qualcomm;
	}
	* request = (struct vs_sw_ver_request *) (message);
	struct __packed vs_sw_ver_confirm 
	{
		struct ethernet_std ethernet;
		struct qualcomm_std qualcomm;
		uint8_t MSTATUS;
		uint8_t MDEVICEID;
		uint8_t MVERLENGTH;
		char MVERSION [PLC_VERSION_STRING];
	}
	* confirm = (struct vs_sw_ver_confirm *) (message);

#ifndef __GNUC__
#pragma pack (pop)
#endif

	Request (plc, "Request Version Information");
	memset (message, 0, sizeof (* message));
	EthernetHeader (&request->ethernet, channel->peer, channel->host, channel->type);
	QualcommHeader (&request->qualcomm, 0, (VS_SW_VER | MMTYPE_REQ));
	plc->packetsize = (ETHER_MIN_LEN - ETHER_CRC_LEN);
	if (SendMME (plc) <= 0) 
	{
		error ((plc->flags & PLC_BAILOUT), errno, CHANNEL_CANTSEND);
		return (-1);
	}
	while (ReadMME (plc, 0, (VS_SW_VER | MMTYPE_CNF)) > 0) 
	{
		if (confirm->MSTATUS) 
		{
			Failure (plc, PLC_WONTDOIT);
			continue;
		}
		chipset (confirm);
		Display (plc, "%s %s", chipsetname (confirm->MDEVICEID), confirm->MVERSION);
	}
	return (0);
}

开发者ID:RozzieD，项目名称:open-plc-utils，代码行数:53，代码来源:VersionInfo1.c

示例13: evse_cm_atten_char

signed evse_cm_atten_char (struct session * session, struct channel * channel, struct message * message)

{
	struct cm_atten_char_indicate * indicate = (struct cm_atten_char_indicate *) (message);
	struct cm_atten_char_response * response = (struct cm_atten_char_response *) (message);
	slac_debug (session, 0, __func__, "--> CM_ATTEN_CHAR.IND");
	memset (message, 0, sizeof (* message));
	EthernetHeader (& indicate->ethernet, session->PEV_MAC, channel->host, channel->type);
	HomePlugHeader1 (& indicate->homeplug, HOMEPLUG_MMV, (CM_ATTEN_CHAR | MMTYPE_IND));
	indicate->APPLICATION_TYPE = session->APPLICATION_TYPE;
	indicate->SECURITY_TYPE = session->SECURITY_TYPE;
	memcpy (indicate->ACVarField.SOURCE_ADDRESS, session->PEV_MAC, sizeof (indicate->ACVarField.SOURCE_ADDRESS));
	memcpy (indicate->ACVarField.RunID, session->RunID, sizeof (indicate->ACVarField.RunID));
	memset (indicate->ACVarField.SOURCE_ID, 0, sizeof (indicate->ACVarField.SOURCE_ID));
	memset (indicate->ACVarField.RESP_ID, 0, sizeof (indicate->ACVarField.RESP_ID));
	indicate->ACVarField.NUM_SOUNDS = session->sounds;
	indicate->ACVarField.ATTEN_PROFILE.NumGroups = session->NumGroups;
	memcpy (indicate->ACVarField.ATTEN_PROFILE.AAG, session->AAG, session->NumGroups);
	if (sendmessage (channel, message, sizeof (* indicate)) <= 0)
	{
		return (slac_debug (session, 1, __func__, CHANNEL_CANTSEND));
	}
	if (readmessage (channel, message, HOMEPLUG_MMV, (CM_ATTEN_CHAR | MMTYPE_RSP)) > 0)
	{
		if (! memcmp (session->RunID, response->ACVarField.RunID, sizeof (session->RunID)))
		{
			slac_debug (session, 0, __func__, "<-- CM_ATTEN_CHAR.RSP");

#if SLAC_DEBUG

			if (_anyset (session->flags, SLAC_VERBOSE))
			{
				char string [256];
				slac_debug (session, 0, __func__, "CM_ATTEN_CHAR.RSP.APPLICATION_TYPE %d", response->APPLICATION_TYPE);
				slac_debug (session, 0, __func__, "CM_ATTEN_CHAR.RSP.SECURITY_TYPE %d", response->SECURITY_TYPE);
				slac_debug (session, 0, __func__, "CM_ATTEN_CHAR.RSP.ACVarfield.SOURCE_ADDRESS %s", HEXSTRING (string, response->ACVarField.SOURCE_ADDRESS));
				slac_debug (session, 0, __func__, "CM_ATTEN_CHAR.RSP.ACVarFIeld.RunID %s", HEXSTRING (string, response->ACVarField.RunID));
				slac_debug (session, 0, __func__, "CM_ATTEN_CHAR.RSP.ACVarField.SOURCE_ID %s", HEXSTRING (string, response->ACVarField.SOURCE_ID));
				slac_debug (session, 0, __func__, "CM_ATTEN_CHAR.RSP.ACVarField.RESP_ID %s", HEXSTRING (string, response->ACVarField.RESP_ID));
				slac_debug (session, 0, __func__, "CM_ATTEN_CHAR.RSP.ACVarField.Result %d", response->ACVarField.Result);
			}

#endif

			return (0);
		}
	}
	return (slac_debug (session, session->exit, __func__, "<-- CM_ATTEN_CHAR.RSP ?"));
}

开发者ID:LucaBongiorni，项目名称:open-plc-utils，代码行数:49，代码来源:evse_cm_atten_char.c

示例14: Platform

signed Platform (struct channel * channel, const uint8_t device []) 

{
	struct message message;
	ssize_t packetsize;

#ifndef __GNUC__
#pragma pack (push,1)
#endif

	struct __packed vs_sw_ver_request 
	{
		struct ethernet_std ethernet;
		struct qualcomm_std qualcomm;
	}
	* request = (struct vs_sw_ver_request *) (&message);
	struct __packed vs_sw_ver_confirm 
	{
		struct ethernet_std ethernet;
		struct qualcomm_std qualcomm;
		uint8_t MSTATUS;
		uint8_t MDEVICEID;
		uint8_t MVERLENGTH;
		char MVERSION [PLC_VERSION_STRING];
	}
	* confirm = (struct vs_sw_ver_confirm *) (&message);

#ifndef __GNUC__
#pragma pack (pop)
#endif

	memset (&message, 0, sizeof (message));
	EthernetHeader (&request->ethernet, device, channel->host, channel->type);
	QualcommHeader (&request->qualcomm, 0, (VS_SW_VER | MMTYPE_REQ));
	if (sendpacket (channel, &message, (ETHER_MIN_LEN - ETHER_CRC_LEN)) > 0) 
	{
		while ((packetsize = readpacket (channel, &message, sizeof (message))) > 0) 
		{
			if (!UnwantedMessage (&message, packetsize, 0, (VS_SW_VER | MMTYPE_CNF))) 
			{
				chipset (confirm);
				printf (" %s", chipsetname (confirm->MDEVICEID));
				printf (" %s", confirm->MVERSION);
				return (0);
			}
		}
	}
	return (-1);
}

开发者ID:RozzieD，项目名称:open-plc-utils，代码行数:49，代码来源:Platform.c

示例15: FactoryDefaults

signed FactoryDefaults (struct plc * plc)

{
	struct channel * channel = (struct channel *)(plc->channel);
	struct message * message = (struct message *)(plc->message);

#ifndef __GNUC__
#pragma pack (push,1)
#endif

	struct __packed vs_fac_defaults_request
	{
		struct ethernet_hdr ethernet;
		struct qualcomm_hdr qualcomm;
	}
	* request = (struct vs_fac_defaults_request *) (message);
	struct __packed vs_fac_defaults_confirm
	{
		struct ethernet_hdr ethernet;
		struct qualcomm_hdr qualcomm;
		uint8_t MSTATUS;
	}
	* confirm = (struct vs_fac_defaults_confirm *) (message);

#ifndef __GNUC__
#pragma pack (pop)
#endif

	Request (plc, "Restore Factory Defaults");
	memset (message, 0, sizeof (* message));
	EthernetHeader (&request->ethernet, channel->peer, channel->host, channel->type);
	QualcommHeader (&request->qualcomm, 0, (VS_FAC_DEFAULTS | MMTYPE_REQ));
	plc->packetsize = (ETHER_MIN_LEN - ETHER_CRC_LEN);
	if (SendMME (plc) <= 0)
	{
		error (PLC_EXIT (plc), errno, CHANNEL_CANTSEND);
		return (-1);
	}
	while (ReadMME (plc, 0, (VS_FAC_DEFAULTS | MMTYPE_CNF)) > 0)
	{
		if (confirm->MSTATUS)
		{
			Failure (plc, PLC_WONTDOIT);
			continue;
		}
		Confirm (plc, "Restoring ...");
	}
	return (0);
}

开发者ID:GSLyons，项目名称:open-plc-utils，代码行数:49，代码来源:FactoryDefaults.c

示例16: ListLocalDevices

signed ListLocalDevices (struct plc * plc, char const * space, char const * comma)

{
	struct channel * channel = (struct channel *)(plc->channel);
	struct message * message = (struct message *)(plc->message);
	ssize_t packetsize;

#ifndef __GNUC__
#pragma pack (push,1)
#endif

	struct __packed vs_sw_ver_request
	{
		struct ethernet_hdr ethernet;
		struct qualcomm_hdr qualcomm;
	}
	* request = (struct vs_sw_ver_request *) (message);

#ifndef __GNUC__
#pragma pack (pop)
#endif

	memset (message, 0, sizeof (* message));
	EthernetHeader (&request->ethernet, channel->peer, channel->host, channel->type);
	QualcommHeader (&request->qualcomm, 0, (VS_SW_VER | MMTYPE_REQ));
	if (sendpacket (channel, message, (ETHER_MIN_LEN - ETHER_CRC_LEN)) <= 0)
	{
		return (-1);
	}
	while ((packetsize = readpacket (channel, message, sizeof (* message))) > 0)
	{
		if (UnwantedMessage (message, packetsize, 0, (VS_SW_VER | MMTYPE_CNF)))
		{
			continue;
		}
		hexout (request->ethernet.OSA, sizeof (request->ethernet.OSA), HEX_EXTENDER, 0, stdout);
		if ((space) && (*space))
		{
			printf ("%s", space);
		}
	}
	if ((comma) && (* comma))
	{
		printf ("%s", comma);
	}
	return (0);
}

开发者ID:I2SE，项目名称:open-plc-utils，代码行数:47，代码来源:ListLocalDevices.c

示例17: Platform

static signed Platform (struct channel * channel, const uint8_t device []) 

{
	extern const char * chipset [CHIPSETS+1];
	struct message message;

#ifndef __GNUC__
#pragma pack (push,1)
#endif

	struct __packed vs_sw_ver_confirm 
	{
		struct header_eth ethernet;
		struct header_int intellon;
		uint8_t MSTATUS;
		uint8_t MDEVICEID;
		uint8_t MVERLENGTH;
		char MVERSION [INT6K_VERSTRING];
	}
	* confirm = (struct vs_sw_ver_confirm *) (&message);

#ifndef __GNUC__
#pragma pack (pop)
#endif

	memset (&message, 0, sizeof (message));
	EthernetHeader (&message.ethernet, device, channel->host);
	IntellonHeader (&message.intellon, (VS_SW_VER | MMTYPE_REQ));
	if (sendpacket (channel, &message, ETHER_MIN_LEN) <= 0) 
	{
//		error (1, errno, INT6K_CANTSEND);
		return (0);
	}
	if (readpacket (channel, &message, sizeof (message)) <= 0) 
	{
//		error (1, errno, INT6K_CANTREAD);
		return (0);
	}
	if (confirm->MDEVICEID > CHIPSETS) 
	{
		confirm->MDEVICEID = 0;
	}
	printf ("  %s", chipset [confirm->MDEVICEID]);
	printf ("  %s", confirm->MVERSION);
	return (0);
}

开发者ID:tcdog001，项目名称:apv5sdk-v15，代码行数:46，代码来源:NetworkTopology.c

示例18: LocalDevices

unsigned LocalDevices (struct channel const * channel, struct message * message, void * memory, size_t extent)

{
	extern const byte localcast [ETHER_ADDR_LEN];
	struct vs_sw_ver_request
	{
		struct ethernet_hdr ethernet;
		struct qualcomm_hdr qualcomm;
	}
	* request = (struct vs_sw_ver_request *)(message);
	uint8_t * origin = (uint8_t *)(memory);
	uint8_t * offset = (uint8_t *)(memory);
	ssize_t packetsize;
	memset (memory, 0, extent);
	memset (message, 0, sizeof (* message));
	EthernetHeader (&request->ethernet, localcast, channel->host, channel->type);
	QualcommHeader (&request->qualcomm, 0, (VS_SW_VER | MMTYPE_REQ));
	if (sendpacket (channel, message, (ETHER_MIN_LEN - ETHER_CRC_LEN)) <= 0)
	{
		return (0);
	}
	while ((packetsize = readpacket (channel, message, sizeof (* message))) > 0)
	{
		if (UnwantedMessage (message, packetsize, 0, (VS_SW_VER | MMTYPE_CNF)))
		{
			continue;
		}
		if (extent >= sizeof (message->ethernet.OSA))
		{
			memcpy (offset, message->ethernet.OSA, sizeof (message->ethernet.OSA));
			offset += sizeof (message->ethernet.OSA);
			extent -= sizeof (message->ethernet.OSA);
		}
	}
	return ((unsigned)(offset - origin) / ETHER_ADDR_LEN);
}

开发者ID:LucaBongiorni，项目名称:open-plc-utils，代码行数:36，代码来源:LocalDevices.c

示例19: con_info

static signed con_info (struct plc * plc, uint8_t TYPE, uint16_t CID, uint16_t TOT_BW_USED)

{
	struct channel * channel = (struct channel *)(plc->channel);
	struct message * message = (struct message *)(plc->message);

#ifndef __GNUC__
#pragma pack (push,1)
#endif

	struct __packed vs_con_info_req
	{
		struct ethernet_hdr ethernet;
		struct qualcomm_hdr qualcomm;
		uint8_t REQ_TYPE;
		uint32_t RSVD;
		uint16_t CSPEC_VER;
		uint16_t CID;
		uint16_t TOT_BW_USED;
	}
	* request = (struct vs_con_info_req *)(message);
	struct __packed vs_con_info_cnf
	{
		struct ethernet_hdr ethernet;
		struct qualcomm_hdr qualcomm;
		uint8_t REQ_TYPE;
		uint8_t MSTATUS;
		uint16_t ERR_REC_CODE;
		uint32_t RSVD;
		uint8_t NUM_CONN;
		struct conn_info CONN_INFO [64];
	}
	* confirm = (struct vs_con_info_cnf *)(message);
	struct conn_info * conn_info = (struct conn_info*)(confirm->CONN_INFO);
	struct vs_con_info_cnf * indicate = (struct vs_con_info_cnf *)(message);

#ifndef __GNUC__
#pragma pack (pop)
#endif

	int i;
	Request (plc, "COQOS connection information");
	memset (message, 0, sizeof (* message));
	EthernetHeader (&request->ethernet, channel->peer, channel->host, channel->type);
	QualcommHeader (&request->qualcomm, 0, (VS_CONN_INFO | MMTYPE_REQ));
	plc->packetsize = (ETHER_MIN_LEN - ETHER_CRC_LEN);
	request->REQ_TYPE = TYPE;
	request->CID = CID;
	request->TOT_BW_USED = TOT_BW_USED;
	request->CSPEC_VER = 0x01;
	if (SendMME (plc) <= 0)
	{
		error (PLC_EXIT (plc), errno, CHANNEL_CANTSEND);
		return (-1);
	}
	while (ReadMME (plc, 0, (VS_CONN_INFO | MMTYPE_CNF)) <= 0);
	if (confirm->MSTATUS)
	{
		Failure (plc, "Error requesting information.");
		return (-1);
	}

/* BW exceeded request and "cancel all requests" do not send indicate */

	if ((TYPE == CONTROL_BW) || (TYPE == CONTROL_BWC))
	{
		Confirm (plc, "Success");
		return (0);
	}
	Confirm (plc, "Received confirm, waiting for indicate...");
	while (ReadMME (plc, 0, (VS_CONN_INFO | MMTYPE_IND)) <= 0);
	if (indicate->MSTATUS)
	{
		Failure (plc, "Error requesting information.");
		return (-1);
	}
	printf ("Number of Connections: %d\n", (int)indicate->NUM_CONN);
	conn_info = (struct conn_info *)(indicate->CONN_INFO);
	for (i = 0; i < indicate->NUM_CONN; i++)
	{
		printf ("SNID: %02X ", conn_info->SNID);
		printf ("CID: %04X ", conn_info->CID);
		printf ("STEI: %02X ", conn_info->STEI);
		printf ("DTEI: %02X ", conn_info->DTEI);
		printf ("LLID: %02X ", conn_info->LLID);
		printf ("CSPEC_VERSION: %04X ", conn_info->CSPECVERSION);
		printf ("CONN_CAP: %02d ", conn_info->CONN_CAP);
		printf ("CONN_COQOS_PRIO: %02d ", conn_info->CONN_COQOS_PRIO);
		printf ("CONN_RATE: %d ", conn_info->CONN_RATE);
		printf ("CONN_TTL: %d ", conn_info->CONN_TTL);
		printf ("BW_USED: %d \n", conn_info->BW_USED);
		conn_info++;
	}
	return (0);
}

开发者ID:LucaBongiorni，项目名称:open-plc-utils，代码行数:95，代码来源:coqos_info.c

示例20: ModuleWrite

signed ModuleWrite (struct plc * plc, struct _file_ * file, unsigned index, struct vs_module_spec * vs_module_spec) 

{
	struct channel * channel = (struct channel *)(plc->channel);
	struct message * message = (struct message *)(plc->message);

#ifndef __GNUC__
#pragma pack (push,1)
#endif

	struct __packed vs_module_operation_write_request 
	{
		struct ethernet_std ethernet;
		struct qualcomm_std qualcomm;
		uint32_t RESERVED;
		uint8_t NUM_OP_DATA;
		struct __packed 
		{
			uint16_t MOD_OP;
			uint16_t MOD_OP_DATA_LEN;
			uint32_t MOD_OP_RSVD;
			uint32_t MOD_OP_SESSION_ID;
			uint8_t MODULE_IDX;
			uint16_t MODULE_ID;
			uint16_t MODULE_SUB_ID;
			uint16_t MODULE_LENGTH;
			uint32_t MODULE_OFFSET;
		}
		MODULE_SPEC;
		uint8_t MODULE_DATA [PLC_MODULE_SIZE];
	}
	* request = (struct vs_module_operation_write_request *)(message);
	struct __packed vs_module_operation_write_confirm 
	{
		struct ethernet_std ethernet;
		struct qualcomm_std qualcomm;
		uint16_t MSTATUS;
		uint16_t ERR_REC_CODE;
		uint32_t RESERVED;
		uint8_t NUM_OP_DATA;
		struct __packed 
		{
			uint16_t MOD_OP;
			uint16_t MOD_OP_DATA_LEN;
			uint32_t MOD_OP_RSVD;
			uint32_t MOD_OP_SESSION_ID;
			uint8_t MODULE_IDX;
			uint16_t MODULE_ID;
			uint16_t MODULE_SUB_ID;
			uint16_t MODULE_LENGTH;
			uint32_t MODULE_OFFSET;
		}
		MODULE_SPEC;
	}
	* confirm = (struct vs_module_operation_write_confirm *)(message);

#ifndef __GNUC__
#pragma pack (pop)
#endif

	unsigned timeout = channel->timeout;
	uint16_t length = PLC_MODULE_SIZE;
	uint32_t extent = vs_module_spec->MODULE_LENGTH;
	uint32_t offset = 0;
	Request (plc, "Flash %s", file->name);
	while (extent) 
	{
		memset (message, 0, sizeof (* message));
		EthernetHeader (&request->ethernet, channel->peer, channel->host, HOMEPLUG_MTYPE);
		QualcommHeader (&request->qualcomm, 0, (VS_MODULE_OPERATION | MMTYPE_REQ));
		plc->packetsize = sizeof (struct vs_module_operation_write_request);
		if (length > extent) 
		{
			length = extent;
		}
		if (read (file->file, request->MODULE_DATA, length) != length) 
		{
			error (1, errno, FILE_CANTREAD, file->name);
		}
		request->NUM_OP_DATA = 1;
		request->MODULE_SPEC.MOD_OP = HTOLE16 (PLC_MOD_OP_WRITE_MODULE);
		request->MODULE_SPEC.MOD_OP_DATA_LEN = HTOLE16 (sizeof (request->MODULE_SPEC) + sizeof (request->MODULE_DATA));
		request->MODULE_SPEC.MOD_OP_SESSION_ID = HTOLE32 (plc->cookie);
		request->MODULE_SPEC.MODULE_IDX = index;
		request->MODULE_SPEC.MODULE_ID = HTOLE16 (vs_module_spec->MODULE_ID);
		request->MODULE_SPEC.MODULE_SUB_ID = HTOLE16 (vs_module_spec->MODULE_SUB_ID);
		request->MODULE_SPEC.MODULE_LENGTH = HTOLE16 (length);
		request->MODULE_SPEC.MODULE_OFFSET = HTOLE32 (offset);

#if 0

		fprintf (stderr, "RESERVED 0x%08X\n", LE32TOH (request->RESERVED));
		fprintf (stderr, "NUM_OP_DATA %d\n", request->NUM_OP_DATA);
		fprintf (stderr, "MOD_OP 0x%02X\n", LE16TOH (request->MODULE_SPEC.MOD_OP));
		fprintf (stderr, "MOD_OP_DATA_LEN %d\n", LE16TOH (request->MODULE_SPEC.MOD_OP_DATA_LEN));
		fprintf (stderr, "RESERVED 0x%08X\n", LE32TOH (request->MODULE_SPEC.MOD_OP_RSVD));
		fprintf (stderr, "MODULE_ID 0x%04X\n", LE16TOH (request->MODULE_SPEC.MODULE_ID));
		fprintf (stderr, "MODULE_SUB_ID 0x%04X\n", LE16TOH (request->MODULE_SPEC.MODULE_SUB_ID));
		fprintf (stderr, "MODULE_LENGTH %d\n", LE16TOH (request->MODULE_SPEC.MODULE_LENGTH));
		fprintf (stderr, "MODULE_OFFSET 0x%08X\n", LE32TOH (request->MODULE_SPEC.MODULE_OFFSET));
//.........这里部分代码省略.........

开发者ID:tcdog001，项目名称:apv5sdk-v15，代码行数:101，代码来源:ModuleWrite.c

注：本文中的EthernetHeader函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ Eval函数代码示例发布时间：2022-05-30

C++ EstEID_log函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18311|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9694|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8191|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8557|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8467|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9408|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8441|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7873|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8425|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7402|2022-11-06

客服电话

电子邮件

C++ EthernetHeader函数代码示例

示例1: Antiphon

示例2: DefaultVLANIDs

示例3: RemoteHosts

示例4: mod_conn

示例5: rel_conn

示例6: Flash

示例7: evse_cm_slac_match

示例8: Classification

示例9: FlashNVM

示例10: HostActionIndicate

示例11: VersionInfo

示例12: VersionInfo1

示例13: evse_cm_atten_char

示例14: Platform

示例15: FactoryDefaults

示例16: ListLocalDevices

示例17: Platform

示例18: LocalDevices

示例19: con_info

示例20: ModuleWrite

请发表评论

全部评论

上一篇：

下一篇：

librespeed/speedtest: Self-hosted Speedt

DeekshithSN/shared-library

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053