C++ FMF_SetCell函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中FMF_SetCell函数的典型用法代码示例。如果您正苦于以下问题：C++ FMF_SetCell函数的具体用法？C++ FMF_SetCell怎么用？C++ FMF_SetCell使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了FMF_SetCell函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: d_piezo_coupling

int32 d_piezo_coupling( FMField *out, FMField *strain, FMField *charge_grad,
			FMField *mtxG, VolumeGeometry *vg )
{
  int32 ii, dim, nQP, ret = RET_OK;
  FMField *ge = 0, *gptge = 0;

  nQP = vg->bfGM->nLev;
  dim = vg->bfGM->nRow;

  fmf_createAlloc( &ge, 1, nQP, dim, 1 );
  fmf_createAlloc( &gptge, 1, nQP, 1, 1 );

  for (ii = 0; ii < out->nCell; ii++) {
    FMF_SetCell( out, ii );
    FMF_SetCell( mtxG, ii );
    FMF_SetCell( vg->det, ii );
    FMF_SetCell( strain, ii );
    FMF_SetCell( charge_grad, ii );

    fmf_mulAB_nn( ge, mtxG, strain );
    fmf_mulATB_nn( gptge, charge_grad, ge );
    fmf_sumLevelsMulF( out, gptge, vg->det->val );
    ERR_CheckGo( ret );
  }

 end_label:
  fmf_freeDestroy( &ge );
  fmf_freeDestroy( &gptge );

  return( ret );
}

开发者ID:mikegraham，项目名称:sfepy，代码行数:31，代码来源:termsPiezo.c

示例2: dw_permeability_r

/*!
  @par Revision history:
  - c: 23.04.2007, r: 23.01.2008
*/
int32 dw_permeability_r( FMField *out, FMField *mtxD, VolumeGeometry *vg,
			 int32 *conn, int32 nEl, int32 nEP,
			 int32 *elList, int32 elList_nRow )
{
  int32 ii, iel, nQP, ret = RET_OK;
  FMField *gtd = 0;

  nQP = vg->bfGM->nLev;

  fmf_createAlloc( &gtd, 1, nQP, nEP, 1 );

  for (ii = 0; ii < elList_nRow; ii++) {
    iel = elList[ii];

    FMF_SetCell( out, ii );
    FMF_SetCell( vg->bfGM, iel );
    FMF_SetCell( vg->det, iel );
    if (mtxD->nCell > 1) {
      FMF_SetCell( mtxD, ii );
    }

    fmf_mulATB_nn( gtd, vg->bfGM, mtxD );
    fmf_sumLevelsMulF( out, gtd, vg->det->val );
    ERR_CheckGo( ret );
  }

 end_label:
  fmf_freeDestroy( &gtd ); 

  return( ret );
}

开发者ID:olivierverdier，项目名称:sfepy，代码行数:35，代码来源:termsLaplace.c

示例3: sg_print

/*!
  @par Revision history:
  - c: 21.12.2005, r: 18.01.2008
*/
int32 sg_print( SurfaceGeometry *obj, FILE *file, int32 mode )
{
  int32 ii;

  fprintf( file, "SurfaceGeometry: mode %d, nFa %d, nQP %d, dim: %d, nFP: %d\n",
	   obj->mode, obj->nFa, obj->nQP, obj->dim, obj->nFP );
  fprintf( file, "totalArea: %.5f\n", obj->totalArea );

  for (ii = 0; ii < obj->det->nCell; ii++) {
    FMF_SetCell( obj->normal, ii );
    FMF_SetCell( obj->det, ii );
    FMF_SetCell( obj->area, ii );
    
    fprintf( file, "%d normal:\n", ii );
    fmf_print( obj->normal, file, mode );
    
    fprintf( file, "%d det:\n", ii );
    fmf_print( obj->det, file, mode );
    
    fprintf( file, "%d area:\n", ii );
    fmf_print( obj->area, file, mode );

    if (obj->bfBGM) {
      FMF_SetCell( obj->bfBGM, ii );
      fprintf( file, "%d bfBGM:\n", ii );
      fmf_print( obj->bfBGM, file, mode );
    }

  }

  return( RET_OK );
}

开发者ID:olivierverdier，项目名称:sfepy，代码行数:36，代码来源:geometry.c

示例4: d_of_nsMinGrad

/*!
  @par Revision history:
  - 23.01.2006, c
  - 02.03.2006
  - 27.07.2006
*/
int32 d_of_nsMinGrad( FMField *out, FMField *grad,
		      FMField *viscosity, VolumeGeometry *vg )
{
  int32 ii, nQP, ret = RET_OK;
  float64 aux;
  FMField *out1 = 0, *gvel2 = 0;

  nQP = vg->bfGM->nLev;

  fmf_createAlloc( &out1, 1, 1, 1, 1 );
  fmf_createAlloc( &gvel2, 1, nQP, 1, 1 );

  FMF_SetFirst( out );
  aux = 0.0;
  for (ii = 0; ii < grad->nCell; ii++) {
    FMF_SetCell( grad, ii );
    FMF_SetCell( viscosity, ii );
    FMF_SetCell( vg->det, ii );

    fmf_mulATB_nn( gvel2, grad, grad );
    fmf_mul( gvel2, viscosity->val );
    fmf_sumLevelsMulF( out1, gvel2, vg->det->val );
    aux += out1->val[0];

    ERR_CheckGo( ret );
  }

  out->val[0] = aux * 0.5;

 end_label:
  fmf_freeDestroy( &out1 );
  fmf_freeDestroy( &gvel2 );

  return( ret );
}

开发者ID:mikegraham，项目名称:sfepy，代码行数:41，代码来源:termsAdjointNavierStokes.c

示例5: dw_hdpm_cache

/*!
  @par Revision history:
  - 30.07.2007, from dw_hdpm_cache()
*/
int32 dq_cauchy_strain( FMField *out, FMField *state, int32 offset,
			VolumeGeometry *vg,
			int32 *conn, int32 nEl, int32 nEP )
{
  int32 ii, dim, sym, nQP, ret = RET_OK;
  FMField *st = 0, *disG = 0;

  state->val = FMF_PtrFirst( state ) + offset;

  nQP = vg->bfGM->nLev;
  dim = vg->bfGM->nRow;

  sym = (dim + 1) * dim / 2;
  fmf_createAlloc( &st, 1, 1, nEP, dim );
  fmf_createAlloc( &disG, 1, nQP, dim, dim );

  for (ii = 0; ii < nEl; ii++) {
    FMF_SetCell( out, ii );
    FMF_SetCell( vg->bfGM, ii );

    ele_extractNodalValuesNBN( st, state, conn + nEP * ii );
    fmf_mulAB_n1( disG, vg->bfGM, st );
    form_sdcc_strainCauchy_VS( out, disG );
/*       fmf_print( out, stdout, 0 ); */
/*       sys_pause(); */
    ERR_CheckGo( ret );
  }

 end_label:
  fmf_freeDestroy( &st ); 
  fmf_freeDestroy( &disG ); 

  return( ret );
}

开发者ID:taldcroft，项目名称:sfepy，代码行数:38，代码来源:termsLinElasticity.c

示例6: vg_print

/*!
  @par Revision history:
  - 11.10.2005, c
  - 12.10.2005
  - 12.10.2006
*/
int32 vg_print( VolumeGeometry *obj, FILE *file, int32 mode )
{
  int32 ii;

  fprintf( file, "VolumeGeometry: mode %d, nEl %d, nQP %d, dim: %d, nEP: %d\n",
	   obj->mode, obj->nEl, obj->nQP, obj->dim, obj->nEP );
  fprintf( file, "totalVolume: %.5f\n", obj->totalVolume );

  for (ii = 0; ii < obj->det->nCell; ii++) {
    FMF_SetCell( obj->bfGM, ii );
    FMF_SetCell( obj->det, ii );
    FMF_SetCell( obj->volume, ii );
    
    fprintf( file, "%d bfGM:\n", ii );
    fmf_print( obj->bfGM, file, mode );
    
    fprintf( file, "%d det:\n", ii );
    fmf_print( obj->det, file, mode );
    
    fprintf( file, "%d volume:\n", ii );
    fmf_print( obj->volume, file, mode );
  }


  return( RET_OK );
}

开发者ID:olivierverdier，项目名称:sfepy，代码行数:32，代码来源:geometry.c

示例7: de_cauchy_strain

/*!
  @par Revision history:
  - 21.09.2006, c
*/
int32 de_cauchy_strain( FMField *out, FMField *strain,
			VolumeGeometry *vg, int32 mode )
{
  int32 ii, dim, sym, nQP, ret = RET_OK;

  nQP = vg->bfGM->nLev;
  dim = vg->bfGM->nRow;
  sym = (dim + 1) * dim / 2;

  for (ii = 0; ii < out->nCell; ii++) {
    FMF_SetCell( out, ii );
    FMF_SetCell( strain, ii );
    FMF_SetCell( vg->det, ii );

    fmf_sumLevelsMulF( out, strain, vg->det->val );
    if (mode == 1) {
      FMF_SetCell( vg->volume, ii );
      fmf_mulC( out, 1.0 / vg->volume->val[0] );
    }
    ERR_CheckGo( ret );
  }

 end_label:
  return( ret );
}

开发者ID:taldcroft，项目名称:sfepy，代码行数:29，代码来源:termsLinElasticity.c

示例8: de_cauchy_stress

/*!
  @par Revision history:
  - c: 25.03.2008
*/
int32 de_cauchy_stress( FMField *out, FMField *strain,
			FMField *mtxD,  VolumeGeometry *vg,
			int32 mode )
{
  int32 ii, dim, sym, nQP, ret = RET_OK;
  FMField *stress = 0;

  nQP = vg->bfGM->nLev;
  dim = vg->bfGM->nRow;
  sym = (dim + 1) * dim / 2;

  fmf_createAlloc( &stress, 1, nQP, sym, 1 );

  for (ii = 0; ii < out->nCell; ii++) {
    FMF_SetCell( out, ii );
    FMF_SetCell( mtxD, ii );
    FMF_SetCell( strain, ii );
    FMF_SetCell( vg->det, ii );

    fmf_mulAB_nn( stress, mtxD, strain );
    fmf_sumLevelsMulF( out, stress, vg->det->val );
    if (mode == 1) {
      FMF_SetCell( vg->volume, ii );
      fmf_mulC( out, 1.0 / vg->volume->val[0] );
    }
    ERR_CheckGo( ret );
  }

 end_label:
  fmf_freeDestroy( &stress );

  return( ret );
}

开发者ID:taldcroft，项目名称:sfepy，代码行数:37，代码来源:termsLinElasticity.c

示例9: d_mass_scalar

/*!
  @par Revision history:
  - 04.09.2007, c
*/
int32 d_mass_scalar( FMField *out, FMField *coef,
		     FMField *stateP, FMField *stateQ,
		     FMField *bf, VolumeGeometry *vg )
{
  int32 ii, dim, nQP, ret = RET_OK;
  FMField *qftfp = 0;

  nQP = vg->bfGM->nLev;
  dim = vg->bfGM->nRow;

  fmf_createAlloc( &qftfp, 1, nQP, 1, 1 );

  for (ii = 0; ii < out->nCell; ii++) {
    FMF_SetCell( out, ii );
    FMF_SetCell( stateP, ii );
    FMF_SetCell( stateQ, ii );
    FMF_SetCell( vg->det, ii );
    if (coef->nCell > 1) {
      FMF_SetCell( coef, ii );
    }
    fmf_mulATB_nn( qftfp, stateQ, stateP );
    fmf_mul( qftfp, coef->val );

    fmf_sumLevelsMulF( out, qftfp, vg->det->val );

    ERR_CheckGo( ret );
  }

 end_label:
  fmf_freeDestroy( &qftfp );

  return( ret );
}

开发者ID:renatocoutinho，项目名称:sfepy，代码行数:37，代码来源:termsMass.c

示例10: dw_lin_prestress

int32 dw_lin_prestress( FMField *out, FMField *stress, VolumeGeometry *vg,
			int32 *elList, int32 elList_nRow, int32 isDiff )
{
  int32 ii, iel, dim, nQP, nEP, ret = RET_OK;
  FMField *res = 0;

  nQP = vg->bfGM->nLev;
  nEP = vg->bfGM->nCol;
  dim = vg->bfGM->nRow;

  fmf_createAlloc( &res, 1, nQP, dim * nEP, 1 );

    for (ii = 0; ii < elList_nRow; ii++) {
      iel = elList[ii];

      FMF_SetCell( out, ii );
      FMF_SetCell( vg->bfGM, iel );
      FMF_SetCell( vg->det, iel );
      FMF_SetCell( stress, iel );

      form_sdcc_actOpGT_VS3( res, vg->bfGM, stress );
      fmf_sumLevelsMulF( out, res, vg->det->val );
      ERR_CheckGo( ret );
    }

 end_label:
    fmf_freeDestroy( &res ); 

  return( ret );
}

开发者ID:taldcroft，项目名称:sfepy，代码行数:30，代码来源:termsLinElasticity.c

示例11: dw_lin_prestress

int32 dw_lin_prestress( FMField *out, FMField *stress, Mapping *vg )
{
  int32 ii, dim, nQP, nEP, ret = RET_OK;
  FMField *res = 0;

  nQP = vg->bfGM->nLev;
  nEP = vg->bfGM->nCol;
  dim = vg->bfGM->nRow;

  fmf_createAlloc( &res, 1, nQP, dim * nEP, 1 );

    for (ii = 0; ii < out->nCell; ii++) {
      FMF_SetCell( out, ii );
      FMF_SetCell( vg->bfGM, ii );
      FMF_SetCell( vg->det, ii );
      FMF_SetCell( stress, ii );

      form_sdcc_actOpGT_VS3( res, vg->bfGM, stress );
      fmf_sumLevelsMulF( out, res, vg->det->val );
      ERR_CheckGo( ret );
    }

 end_label:
    fmf_freeDestroy( &res );

  return( ret );
}

开发者ID:LeiDai，项目名称:sfepy，代码行数:27，代码来源:terms_elastic.c

示例12: dw_lin_strain_fib

int32 dw_lin_strain_fib( FMField *out, FMField *mtxD, FMField *mat,
			 Mapping *vg )
{
  int32 ii, dim, sym, nQP, nEP, ret = RET_OK;
  FMField *aux1 = 0, *aux2 = 0;

  nQP = vg->bfGM->nLev;
  nEP = vg->bfGM->nCol;
  dim = vg->bfGM->nRow;
  sym = (dim + 1) * dim / 2;

  fmf_createAlloc( &aux1, 1, nQP, nEP * dim, sym );
  fmf_createAlloc( &aux2, 1, nQP, nEP * dim, 1 );

  for (ii = 0; ii < out->nCell; ii++) {
    FMF_SetCell( out, ii );
    FMF_SetCell( mtxD, ii );
    FMF_SetCell( mat, ii );
    FMF_SetCell( vg->bfGM, ii );
    FMF_SetCell( vg->det, ii );

    form_sdcc_actOpGT_M3( aux1, vg->bfGM, mtxD );
    fmf_mulAB_nn( aux2, aux1, mat );
    fmf_sumLevelsMulF( out, aux2, vg->det->val );
    ERR_CheckGo( ret );
  }

 end_label:
  fmf_freeDestroy( &aux1 );
  fmf_freeDestroy( &aux2 );

  return( ret );
}

开发者ID:LeiDai，项目名称:sfepy，代码行数:33，代码来源:terms_elastic.c

示例13: d_diffusion

/*!
  @par Revision history:
  - c: 12.03.2007, r: 23.01.2008
*/
int32 d_diffusion( FMField *out, FMField *gradP1, FMField *gradP2,
		   FMField *mtxD, Mapping *vg )
{
  int32 ii, dim, nQP, ret = RET_OK;
  FMField *dgp2 = 0, *gp1tdgp2 = 0;

  nQP = vg->bfGM->nLev;
  dim = vg->bfGM->nRow;

  fmf_createAlloc( &dgp2, 1, nQP, dim, 1 );
  fmf_createAlloc( &gp1tdgp2, 1, nQP, 1, 1 );

  for (ii = 0; ii < out->nCell; ii++) {
    FMF_SetCell( out, ii );
    FMF_SetCell( vg->det, ii );
    FMF_SetCell( gradP1, ii );
    FMF_SetCell( gradP2, ii );
    if (mtxD->nCell > 1) {
      FMF_SetCell( mtxD, ii );
    }

    fmf_mulAB_nn( dgp2, mtxD, gradP2 );
    fmf_mulATB_nn( gp1tdgp2, gradP1, dgp2 );
    fmf_sumLevelsMulF( out, gp1tdgp2, vg->det->val );

    ERR_CheckGo( ret );
  }

 end_label:
  fmf_freeDestroy( &dgp2 );
  fmf_freeDestroy( &gp1tdgp2 );

  return( ret );
}

开发者ID:snilek，项目名称:sfepy，代码行数:38，代码来源:terms_diffusion.c

示例14: d_sd_volume_dot

/*!
  mode == 0: \int pq
  mode == 1: \int pq div V

  Works for both scalars and vectors.

  @par Revision history:
  - 24.02.2006, c
  - 27.02.2006
*/
int32 d_sd_volume_dot( FMField *out, FMField *stateP, FMField *stateQ,
                       FMField *divMV, VolumeGeometry *vg, int32 mode )
{
  int32 ii, nQP, ret = RET_OK;
  FMField *pq = 0;

  nQP = vg->bfGM->nLev;

  fmf_createAlloc( &pq, 1, nQP, 1, 1 );

  for (ii = 0; ii < out->nCell; ii++) {
    FMF_SetCell( out, ii );
    FMF_SetCell( stateP, ii );
    FMF_SetCell( stateQ, ii );
    FMF_SetCell( vg->det, ii );

    fmf_mulATB_nn( pq, stateP, stateQ );

    if (mode == 1) {
      FMF_SetCell( divMV, ii );

      fmf_mul( pq, divMV->val );
    }
    fmf_sumLevelsMulF( out, pq, vg->det->val );

    ERR_CheckGo( ret );
  }

 end_label:
  fmf_freeDestroy( &pq );

  return( ret );
}

开发者ID:mikegraham，项目名称:sfepy，代码行数:43，代码来源:termsAdjointNavierStokes.c

示例15: dw_diffusion_r

/*!
  @par Revision history:
  - c: 23.04.2007, r: 23.01.2008
*/
int32 dw_diffusion_r( FMField *out, FMField *mtxD, Mapping *vg )
{
  int32 ii, nQP, nEP, ret = RET_OK;
  FMField *gtd = 0;

  nQP = vg->bfGM->nLev;
  nEP = vg->bfGM->nCol;

  fmf_createAlloc( &gtd, 1, nQP, nEP, 1 );

  for (ii = 0; ii < out->nCell; ii++) {
    FMF_SetCell( out, ii );
    FMF_SetCell( vg->bfGM, ii );
    FMF_SetCell( vg->det, ii );
    if (mtxD->nCell > 1) {
      FMF_SetCell( mtxD, ii );
    }

    fmf_mulATB_nn( gtd, vg->bfGM, mtxD );
    fmf_sumLevelsMulF( out, gtd, vg->det->val );
    ERR_CheckGo( ret );
  }

 end_label:
  fmf_freeDestroy( &gtd );

  return( ret );
}

开发者ID:snilek，项目名称:sfepy，代码行数:32，代码来源:terms_diffusion.c

示例16: d_surf_lcouple

int32 d_surf_lcouple( FMField *out, FMField *stateP, FMField *gradQ, FMField *coef,
                      Mapping *sg )
{
    int32 ii, dim, nQP, ret = RET_OK;
    FMField *aux1 = 0, *aux2 = 0;

    nQP = stateP->nLev;
    dim = coef->nRow;

    fmf_createAlloc(&aux1, 1, nQP, dim, 1);
    fmf_createAlloc(&aux2, 1, nQP, 1, 1);

    for (ii = 0; ii < out->nCell; ii++) {
        if (coef->nCell > 1)
            FMF_SetCell( coef, ii );

        FMF_SetCell( out, ii );
        FMF_SetCell( sg->det, ii );
        FMF_SetCell(stateP, ii);
        FMF_SetCell(gradQ, ii);

        fmf_mulAB_nn(aux1, coef, stateP);
        fmf_mulATB_nn(aux2, gradQ, aux1);
        fmf_sumLevelsMulF(out, aux2, sg->det->val);

        ERR_CheckGo( ret );
    }

end_label:
    fmf_freeDestroy(&aux1);
    fmf_freeDestroy(&aux2);

    return( ret );
}

开发者ID:adesam01，项目名称:sfepy，代码行数:34，代码来源:terms_acoustic.c

示例17: d_biot_div

/*!
  @par Revision history:
  - c: 05.03.2008, r: 05.03.2008
*/
int32 d_biot_div( FMField *out, float64 coef, FMField *state, FMField *strain,
		  FMField *mtxD, Mapping *vg )
{
  int32 ii, nQP, ret = RET_OK;
  FMField *dtgu = 0, *pftdtgu = 0;

  nQP = vg->bfGM->nLev;

/*   fmf_print( mtxD, stdout, 0 ); */

  fmf_createAlloc( &dtgu, 1, nQP, 1, 1 );
  fmf_createAlloc( &pftdtgu, 1, nQP, 1, 1 );

  for (ii = 0; ii < out->nCell; ii++) {
    FMF_SetCell( out, ii );
    FMF_SetCell( mtxD, ii );
    FMF_SetCell( vg->det, ii );
    FMF_SetCell( state, ii );
    FMF_SetCell( strain, ii );

    fmf_mulATB_nn( dtgu, mtxD, strain );
    fmf_mulATB_nn( pftdtgu, state, dtgu );
    fmf_sumLevelsMulF( out, pftdtgu, vg->det->val );
    ERR_CheckGo( ret );
  }

  // E.g. 1/dt.
  fmfc_mulC( out, coef );

 end_label:
  fmf_freeDestroy( &dtgu );
  fmf_freeDestroy( &pftdtgu );

  return( ret );
}

开发者ID:AshitaPrasad，项目名称:sfepy，代码行数:39，代码来源:termsBiot.c

示例18: dw_biot_grad

/*!
  @par Revision history:
  - 03.08.2006, c
  - 01.12.2006
*/
int32 dw_biot_grad( FMField *out, float64 coef, FMField *pressure_qp,
		    FMField *mtxD, Mapping *svg, Mapping *vvg,
		    int32 isDiff )
{
  int32 ii, nEPU, nEP, dim, nQP, ret = RET_OK;
  FMField *dfp = 0, *gtdfp = 0, *gtd = 0, *gtdf = 0;

  nQP = vvg->bfGM->nLev;
  dim = vvg->bfGM->nRow;
  nEPU = vvg->bfGM->nCol;
  nEP = svg->bf->nCol;

/*   fmf_print( mtxD, stdout, 0 ); */

  if (isDiff == 1) {
    fmf_createAlloc( &gtd, 1, nQP, dim * nEPU, 1 );
    fmf_createAlloc( &gtdf, 1, nQP, dim * nEPU, nEP );
  } else {
    int32 sym = (dim + 1) * dim / 2;
    fmf_createAlloc( &dfp, 1, nQP, sym, 1 );
    fmf_createAlloc( &gtdfp, 1, nQP, dim * nEPU, 1 );
  }

  for (ii = 0; ii < out->nCell; ii++) {
    FMF_SetCell( out, ii );
    FMF_SetCell( mtxD, ii );
    FMF_SetCell( vvg->bfGM, ii );
    FMF_SetCell( vvg->det, ii );

    if (isDiff == 1) {
      FMF_SetCellX1( svg->bf, ii );
      form_sdcc_actOpGT_M3( gtd, vvg->bfGM, mtxD );
      fmf_mulAB_nn( gtdf, gtd, svg->bf );
      fmf_sumLevelsMulF( out, gtdf, vvg->det->val );
    } else {
      FMF_SetCell( pressure_qp, ii );
      fmf_mulAB_nn( dfp, mtxD, pressure_qp );
      form_sdcc_actOpGT_VS3( gtdfp, vvg->bfGM, dfp );
      fmf_sumLevelsMulF( out, gtdfp, vvg->det->val );
    }
    ERR_CheckGo( ret );
  }

  // E.g. 1/dt.
  fmfc_mulC( out, coef );

 end_label:
  if (isDiff) {
    fmf_freeDestroy( &gtd );
    fmf_freeDestroy( &gtdf );
  } else {
    fmf_freeDestroy( &dfp );
    fmf_freeDestroy( &gtdfp );
  }

  return( ret );
}

开发者ID:AshitaPrasad，项目名称:sfepy，代码行数:62，代码来源:termsBiot.c

示例19: d_sd_st_grad_div

/*!
  @par Revision history:
  - 24.10.2007, c
*/
int32 d_sd_st_grad_div( FMField *out, FMField *divU, FMField *gradU,
			FMField *divW, FMField *gradW, FMField *divMV,
			FMField *gradMV, FMField *coef,
			VolumeGeometry *vg_u, int32 mode )
{
  int32 ii, nQP, ret = RET_OK;
  FMField *scalar1 = 0, *scalar2 = 0;

  nQP = vg_u->bfGM->nLev;

  fmf_createAlloc( &scalar1, 1, nQP, 1, 1 );

  if (mode == 1) {
    fmf_createAlloc( &scalar2, 1, nQP, 1, 1 );
  }

  for (ii = 0; ii < out->nCell; ii++) {
    FMF_SetCell( out, ii );
    FMF_SetCell( coef, ii );
    FMF_SetCell( divU, ii );
    FMF_SetCell( divW, ii );
    FMF_SetCell( vg_u->det, ii );

    if (mode == 0) {
      // (div u, div w)
      fmf_mulATB_nn( scalar1, divU, divW );
      fmf_mul( scalar1, coef->val );
      fmf_sumLevelsMulF( out, scalar1, vg_u->det->val );

    } else if (mode == 1) {
      FMF_SetCell( divMV, ii );
      FMF_SetCell( gradU, ii );
      FMF_SetCell( gradW, ii );
      FMF_SetCell( gradMV, ii );

      // div u div w div nu ...
      fmf_mulATB_nn( scalar1, divU, divW );
      fmf_mulATB_nn( scalar2, divMV, scalar1 );

      // ... - (gu : gnu^T) div w ...
      sub_mul_gradddgrad_scalar( scalar2, gradMV, gradU, divW );

      // ... - (gw : gnu^T) div u
      sub_mul_gradddgrad_scalar( scalar2, gradMV, gradW, divU );

      fmf_mul( scalar2, coef->val );
      fmf_sumLevelsMulF( out, scalar2, vg_u->det->val );
    }
    ERR_CheckGo( ret );
  }

 end_label:
  fmf_freeDestroy( &scalar1 );
  if (mode == 1) {
    fmf_freeDestroy( &scalar2 );
  }

  return( ret );
}

开发者ID:mikegraham，项目名称:sfepy，代码行数:63，代码来源:termsAdjointNavierStokes.c

示例20: vg_getElementDiameters

/*!
  @par Revision history:
  - 09.01.2006, c
  - 10.01.2006
*/
int32 vg_getElementDiameters( VolumeGeometry *obj, FMField *out,
			      int32 *edges, int32 edges_nRow, int32 edges_nCol,
			      float64 *coorIn, int32 nNod, int32 dim,
			      int32 *conn, int32 nEl, int32 nEP,
			      int32 *elList, int32 elList_nRow,
			      int32 mode )
{
  int32 ii, ie, id, iel, nd;
  float64 val0 = 0.0, val1 = 0.0, vv, aux = 0.0, exponent;

  if ((mode < 0) && (mode > 2)) {
    errput( ErrHead "ERR_Switch\n" );
    return( RET_Fail );
  }

/*   output( "%d %d %d %d %d %d %d\n", */
/* 	  edges_nRow, edges_nCol, nNod, dim, nEl, nEP, elList_nRow ); */

  nd = obj->bfGM->nRow; // Can be <> dim.
  exponent = 1.0 / ((float64) dim);
  for (ii = 0; ii < elList_nRow; ii++) {
    iel = elList[ii];
    FMF_SetCell( out, ii );

    if ((mode == 0) || (mode == 2)) {
      val0 = 0.0;
      for (ie = 0; ie < edges_nRow; ie++) {
	vv = 0.0;
	for (id = 0; id < nd; id++) {
	  aux = coorIn[dim*conn[nEP*iel+edges[2*ie+1]]+id]
	    - coorIn[dim*conn[nEP*iel+edges[2*ie+0]]+id];
/* 	  output( "%d %d %d %d %f %f %f\n", ii, iel, ie, id, aux, */
/* 		  coorIn[dim*conn[nEP*iel+edges[2*ie+1]]+id], */
/* 		  coorIn[dim*conn[nEP*iel+edges[2*ie+0]]+id] ); */
/* 	  sys_pause(); */
	  vv += aux * aux;
	}
/* 	output("%f\n", sqrt(vv)); */
	val0 = Max( val0, vv );
	out->val[0] = val0;
      }
    }
    if ((mode == 1) || (mode == 2)) {
      FMF_SetCell( obj->volume, iel );
      val1 = pow( 0.16 * obj->volume->val[0], exponent );
      out->val[0] = val1;
    }
    if (mode == 2) {
      out->val[0] = Max( val0, val1 );
    }
  }
  return( RET_OK );
}

开发者ID:olivierverdier，项目名称:sfepy，代码行数:58，代码来源:geometry.c

注：本文中的FMF_SetCell函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ FMOD_Channel_SetPaused函数代码示例发布时间：2022-05-30

C++ FMA函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18307|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9693|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8189|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8556|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8466|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9407|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8440|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7872|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8424|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7401|2022-11-06

客服电话

电子邮件

C++ FMF_SetCell函数代码示例

示例1: d_piezo_coupling

示例2: dw_permeability_r

示例3: sg_print

示例4: d_of_nsMinGrad

示例5: dw_hdpm_cache

示例6: vg_print

示例7: de_cauchy_strain

示例8: de_cauchy_stress

示例9: d_mass_scalar

示例10: dw_lin_prestress

示例11: dw_lin_prestress

示例12: dw_lin_strain_fib

示例13: d_diffusion

示例14: d_sd_volume_dot

示例15: dw_diffusion_r

示例16: d_surf_lcouple

示例17: d_biot_div

示例18: dw_biot_grad

示例19: d_sd_st_grad_div

示例20: vg_getElementDiameters

请发表评论

全部评论

上一篇：

下一篇：

librespeed/speedtest: Self-hosted Speedt

DeekshithSN/shared-library

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053