C++ FT_FRAME_RELEASE函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中FT_FRAME_RELEASE函数的典型用法代码示例。如果您正苦于以下问题：C++ FT_FRAME_RELEASE函数的具体用法？C++ FT_FRAME_RELEASE怎么用？C++ FT_FRAME_RELEASE使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了FT_FRAME_RELEASE函数的17个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: tt_face_done

  tt_face_done( FT_Face  ttface )           /* TT_Face */
  {
    TT_Face       face   = (TT_Face)ttface;
    FT_Memory     memory = face->root.memory;
    FT_Stream     stream = face->root.stream;

    SFNT_Service  sfnt   = (SFNT_Service)face->sfnt;


    /* for `extended TrueType formats' (i.e. compressed versions) */
    if ( face->extra.finalizer )
      face->extra.finalizer( face->extra.data );

    if ( sfnt )
      sfnt->done_face( face );

    /* freeing the locations table */
    tt_face_done_loca( face );

    /* freeing the CVT */
    FT_FREE( face->cvt );
    face->cvt_size = 0;

    /* freeing the programs */
    FT_FRAME_RELEASE( face->font_program );
    FT_FRAME_RELEASE( face->cvt_program );
    face->font_program_size = 0;
    face->cvt_program_size  = 0;

#ifdef TT_CONFIG_OPTION_GX_VAR_SUPPORT
    tt_done_blend( memory, face->blend );
    face->blend = NULL;
#endif
  }

开发者ID:allanw1，项目名称:Arianrhod，代码行数:34，代码来源:ttobjs.c

示例2: TT_Face_Done

  TT_Face_Done( TT_Face  face )
  {
    FT_Memory     memory = face->root.memory;
    FT_Stream     stream = face->root.stream;

    SFNT_Service  sfnt   = (SFNT_Service)face->sfnt;


    /* for `extended TrueType formats' (i.e. compressed versions) */
    if ( face->extra.finalizer )
      face->extra.finalizer( face->extra.data );

    if ( sfnt )
      sfnt->done_face( face );

    /* freeing the locations table */
    FT_FREE( face->glyph_locations );
    face->num_locations = 0;

    /* freeing the CVT */
    FT_FREE( face->cvt );
    face->cvt_size = 0;

    /* freeing the programs */
    FT_FRAME_RELEASE( face->font_program );
    FT_FRAME_RELEASE( face->cvt_program );
    face->font_program_size = 0;
    face->cvt_program_size  = 0;
  }

开发者ID:Claruarius，项目名称:stblinux-2.6.37，代码行数:29，代码来源:ttobjs.c

示例3: fnt_font_done

  static void
  fnt_font_done( FNT_Font   font,
                 FT_Stream  stream )
  {
    if ( font->fnt_frame )
      FT_FRAME_RELEASE( font->fnt_frame );

    font->fnt_size  = 0;
    font->fnt_frame = 0;
  }

开发者ID:Claruarius，项目名称:stblinux-2.6.37，代码行数:10，代码来源:winfnt.c

示例4: CFF_Done_FD_Select

  static void
  CFF_Done_FD_Select( CFF_FDSelect  fdselect,
                      FT_Stream     stream )
  {
    if ( fdselect->data )
      FT_FRAME_RELEASE( fdselect->data );

    fdselect->data_size   = 0;
    fdselect->format      = 0;
    fdselect->range_count = 0;
  }

开发者ID:Ali-il，项目名称:gamekit，代码行数:11，代码来源:cffload.c

示例5: cff_index_forget_element

  cff_index_forget_element( CFF_Index  idx,
                            FT_Byte**  pbytes )
  {
    if ( idx->bytes == 0 )
    {
      FT_Stream  stream = idx->stream;


      FT_FRAME_RELEASE( *pbytes );
    }
  }

开发者ID:Ali-il，项目名称:gamekit，代码行数:11，代码来源:cffload.c

示例6: tt_face_done_kern

  tt_face_done_kern( TT_Face  face )
  {
    FT_Stream  stream = face->root.stream;


    FT_FRAME_RELEASE( face->kern_table );
    face->kern_table_size = 0;
    face->num_kern_tables = 0;
    face->kern_avail_bits = 0;
    face->kern_order_bits = 0;
  }

开发者ID:mcodegeeks，项目名称:OpenKODE-Framework，代码行数:11，代码来源:ttkern.c

示例7: CID_Done_Parser

  CID_Done_Parser( CID_Parser*  parser )
  {
    /* always free the private dictionary */
    if ( parser->postscript )
    {
      FT_Stream  stream = parser->stream;


      FT_FRAME_RELEASE( parser->postscript );
    }
    parser->root.funcs.done( &parser->root );
  }

开发者ID:SOLARIC，项目名称:world-opponent-network，代码行数:12，代码来源:cidparse.c

示例8: tt_face_free_colr

  tt_face_free_colr( TT_Face  face )
  {
    FT_Stream  stream = face->root.stream;
    FT_Memory  memory = face->root.memory;

    Colr*  colr = (Colr*)face->colr;


    if ( colr )
    {
      FT_FRAME_RELEASE( colr->table );
      FT_FREE( colr );
    }
  }

开发者ID:ImageMagick，项目名称:ttf，代码行数:14，代码来源:ttcolr.c

示例9: cff_index_done

  static void
  cff_index_done( CFF_Index  idx )
  {
    if ( idx->stream )
    {
      FT_Stream  stream = idx->stream;
      FT_Memory  memory = stream->memory;


      if ( idx->bytes )
        FT_FRAME_RELEASE( idx->bytes );

      FT_FREE( idx->offsets );
      FT_MEM_ZERO( idx, sizeof ( *idx ) );
    }
  }

开发者ID:Ali-il，项目名称:gamekit，代码行数:16，代码来源:cffload.c

示例10: fnt_font_done

static void
fnt_font_done( FNT_Face face )
{
    FT_Memory  memory = FT_FACE( face )->memory;
    FT_Stream  stream = FT_FACE( face )->stream;
    FNT_Font   font   = face->font;


    if ( !font )
        return;

    if ( font->fnt_frame )
        FT_FRAME_RELEASE( font->fnt_frame );

    FT_FREE( font );
    face->font = 0;
}

开发者ID:1tgr，项目名称:mobius，代码行数:17，代码来源:winfnt.c

示例11: tt_face_free_bdf_props

  tt_face_free_bdf_props( TT_Face  face )
  {
    TT_BDF  bdf = &face->bdf;


    if ( bdf->loaded )
    {
      FT_Stream  stream = FT_FACE(face)->stream;


      if ( bdf->table != NULL )
        FT_FRAME_RELEASE( bdf->table );

      bdf->table_end    = NULL;
      bdf->strings      = NULL;
      bdf->strings_size = 0;
    }
  }

开发者ID:erdincay，项目名称:vcxsrv-linux2windows，代码行数:18，代码来源:ttbdf.c

示例12: sfnt_done_face

sfnt_done_face(TT_Face face)
{
    FT_Memory    memory;
    SFNT_Service sfnt;


    if (!face)
        return;

    memory = face->root.memory;
    sfnt   = (SFNT_Service)face->sfnt;

    if (sfnt)
    {
        /* destroy the postscript names table if it is loaded */
        if (sfnt->free_psnames)
            sfnt->free_psnames(face);

        /* destroy the embedded bitmaps table if it is loaded */
        if (sfnt->free_eblc)
            sfnt->free_eblc(face);
    }

#ifdef TT_CONFIG_OPTION_BDF
    /* freeing the embedded BDF properties */
    tt_face_free_bdf_props(face);
#endif

    /* freeing the kerning table */
    tt_face_done_kern(face);

    /* freeing the collection table */
    FT_FREE(face->ttc_header.offsets);
    face->ttc_header.count = 0;

    /* freeing table directory */
    FT_FREE(face->dir_tables);
    face->num_tables = 0;

    {
        FT_Stream stream = FT_FACE_STREAM(face);


        /* simply release the 'cmap' table frame */
        FT_FRAME_RELEASE(face->cmap_table);
        face->cmap_size = 0;
    }

    /* freeing the horizontal metrics */
#ifndef FT_CONFIG_OPTION_OLD_INTERNALS
    {
        FT_Stream stream = FT_FACE_STREAM(face);


        FT_FRAME_RELEASE(face->horz_metrics);
        FT_FRAME_RELEASE(face->vert_metrics);
        face->horz_metrics_size = 0;
        face->vert_metrics_size = 0;
    }
#else
    FT_FREE(face->horizontal.long_metrics);
    FT_FREE(face->horizontal.short_metrics);
#endif

    /* freeing the vertical ones, if any */
    if (face->vertical_info)
    {
        FT_FREE(face->vertical.long_metrics);
        FT_FREE(face->vertical.short_metrics);
        face->vertical_info = 0;
    }

    /* freeing the gasp table */
    FT_FREE(face->gasp.gaspRanges);
    face->gasp.numRanges = 0;

    /* freeing the name table */
    if (sfnt)
        sfnt->free_name(face);

    /* freeing family and style name */
    FT_FREE(face->root.family_name);
    FT_FREE(face->root.style_name);

    /* freeing sbit size table */
    FT_FREE(face->root.available_sizes);
    face->root.num_fixed_sizes = 0;

    FT_FREE(face->postscript_name);

    face->sfnt = 0;
}

开发者ID:hyyh619，项目名称:OpenSceneGraph-3.4.0，代码行数:92，代码来源:sfobjs.c

示例13: tt_face_load_bdf_props

  static FT_Error
  tt_face_load_bdf_props( TT_Face    face,
                          FT_Stream  stream )
  {
    TT_BDF    bdf = &face->bdf;
    FT_ULong  length;
    FT_Error  error;


    FT_ZERO( bdf );

    error = tt_face_goto_table( face, TTAG_BDF, stream, &length );
    if ( error                                  ||
         length < 8                             ||
         FT_FRAME_EXTRACT( length, bdf->table ) )
    {
      error = FT_THROW( Invalid_Table );
      goto Exit;
    }

    bdf->table_end = bdf->table + length;

    {
      FT_Byte*   p           = bdf->table;
      FT_UInt    version     = FT_NEXT_USHORT( p );
      FT_UInt    num_strikes = FT_NEXT_USHORT( p );
      FT_ULong   strings     = FT_NEXT_ULONG ( p );
      FT_UInt    count;
      FT_Byte*   strike;


      if ( version != 0x0001                 ||
           strings < 8                       ||
           ( strings - 8 ) / 4 < num_strikes ||
           strings + 1 > length              )
      {
        goto BadTable;
      }

      bdf->num_strikes  = num_strikes;
      bdf->strings      = bdf->table + strings;
      bdf->strings_size = length - strings;

      count  = bdf->num_strikes;
      p      = bdf->table + 8;
      strike = p + count * 4;


      for ( ; count > 0; count-- )
      {
        FT_UInt  num_items = FT_PEEK_USHORT( p + 2 );

        /*
         *  We don't need to check the value sets themselves, since this
         *  is done later.
         */
        strike += 10 * num_items;

        p += 4;
      }

      if ( strike > bdf->strings )
        goto BadTable;
    }

    bdf->loaded = 1;

  Exit:
    return error;

  BadTable:
    FT_FRAME_RELEASE( bdf->table );
    FT_ZERO( bdf );
    error = FT_THROW( Invalid_Table );
    goto Exit;
  }

开发者ID:erdincay，项目名称:vcxsrv-linux2windows，代码行数:76，代码来源:ttbdf.c

示例14: cid_parser_new


//.........这里部分代码省略.........
          FT_TRACE2(( "cid_parser_new: no `StartData' keyword found\n" ));
          error = FT_THROW( Invalid_File_Format );
          goto Exit;
        }

        FT_MEM_MOVE( buffer,
                     buffer + read_offset + read_len - STARTDATA_LEN,
                     STARTDATA_LEN );

        /* values for the next loop */
        read_len    = 256;
        read_offset = STARTDATA_LEN;
        p           = buffer + read_offset;
      }
    }

  Found:
    /* We have found the start of the binary data or the `/sfnts' token. */
    /* Now rewind and extract the frame corresponding to this PostScript */
    /* section.                                                          */

    ps_len = offset - base_offset;
    if ( FT_STREAM_SEEK( base_offset )                  ||
         FT_FRAME_EXTRACT( ps_len, parser->postscript ) )
      goto Exit;

    parser->data_offset    = offset;
    parser->postscript_len = ps_len;
    parser->root.base      = parser->postscript;
    parser->root.cursor    = parser->postscript;
    parser->root.limit     = parser->root.cursor + ps_len;
    parser->num_dict       = -1;

    /* Finally, we check whether `StartData' or `/sfnts' was real --  */
    /* it could be in a comment or string.  We also get the arguments */
    /* of `StartData' to find out whether the data is represented in  */
    /* binary or hex format.                                          */

    arg1 = parser->root.cursor;
    cid_parser_skip_PS_token( parser );
    cid_parser_skip_spaces  ( parser );
    arg2 = parser->root.cursor;
    cid_parser_skip_PS_token( parser );
    cid_parser_skip_spaces  ( parser );

    limit = parser->root.limit;
    cur   = parser->root.cursor;

    while ( cur <= limit - SFNTS_LEN )
    {
      if ( parser->root.error )
      {
        error = parser->root.error;
        goto Exit;
      }

      if ( cur[0] == 'S'                                           &&
           cur <= limit - STARTDATA_LEN                            &&
           ft_strncmp( (char*)cur, STARTDATA, STARTDATA_LEN ) == 0 )
      {
        if ( ft_strncmp( (char*)arg1, "(Hex)", 5 ) == 0 )
        {
          FT_Long  tmp = ft_strtol( (const char *)arg2, NULL, 10 );


          if ( tmp < 0 )
          {
            FT_ERROR(( "cid_parser_new: invalid length of hex data\n" ));
            error = FT_THROW( Invalid_File_Format );
          }
          else
            parser->binary_length = (FT_ULong)tmp;
        }

        goto Exit;
      }
      else if ( cur[1] == 's'                                   &&
                ft_strncmp( (char*)cur, SFNTS, SFNTS_LEN ) == 0 )
      {
        FT_TRACE2(( "cid_parser_new: cannot handle Type 11 fonts\n" ));
        error = FT_THROW( Unknown_File_Format );
        goto Exit;
      }

      cid_parser_skip_PS_token( parser );
      cid_parser_skip_spaces  ( parser );
      arg1 = arg2;
      arg2 = cur;
      cur  = parser->root.cursor;
    }

    /* we haven't found the correct `StartData'; go back and continue */
    /* searching                                                      */
    FT_FRAME_RELEASE( parser->postscript );
    if ( !FT_STREAM_SEEK( offset ) )
      goto Again;

  Exit:
    return error;
  }

开发者ID:GWRon，项目名称:pub.mod-NG，代码行数:101，代码来源:cidparse.c

示例15: cid_parser_new


//.........这里部分代码省略.........
    if ( error )
      goto Exit;

  Again:
    /* now, read the rest of the file until we find a `StartData' */
    buff_len = 256;
    for (;;)
    {
      FT_Byte*  p;
      FT_ULong  top_position;


      /* fill input buffer */
      limit     = buffer + 256;
      buff_len -= 256;
      if ( buff_len > 0 )
        FT_MEM_MOVE( buffer, limit, buff_len );

      p = buffer + buff_len;

      if ( FT_STREAM_READ( p, 256 + 10 - buff_len ) )
        goto Exit;

      top_position = FT_STREAM_POS() - buff_len;
      buff_len     = 256 + 10;

      /* look for `StartData' */
      for ( p = buffer; p < limit; p++ )
      {
        if ( p[0] == 'S' && ft_strncmp( (char*)p, "StartData", 9 ) == 0 )
        {
          /* save offset of binary data after `StartData' */
          offset = (FT_ULong)( top_position - ( limit - p ) + 10 );
          goto Found;
        }
      }
    }

  Found:
    /* we have found the start of the binary data.  We will now     */
    /* rewind and extract the frame corresponding to the PostScript */
    /* section                                                      */

    ps_len = offset - base_offset;
    if ( FT_STREAM_SEEK( base_offset )                  ||
         FT_FRAME_EXTRACT( ps_len, parser->postscript ) )
      goto Exit;

    parser->data_offset    = offset;
    parser->postscript_len = ps_len;
    parser->root.base      = parser->postscript;
    parser->root.cursor    = parser->postscript;
    parser->root.limit     = parser->root.cursor + ps_len;
    parser->num_dict       = -1;

    /* Finally, we check whether `StartData' was real -- it could be  */
    /* in a comment or string.  We also get its arguments to find out */
    /* whether the data is represented in binary or hex format.       */

    arg1 = parser->root.cursor;
    cid_parser_skip_PS_token( parser );
    cid_parser_skip_spaces  ( parser );
    arg2 = parser->root.cursor;
    cid_parser_skip_PS_token( parser );
    cid_parser_skip_spaces  ( parser );

    limit = parser->root.limit;
    cur   = parser->root.cursor;

    while ( cur < limit )
    {
      if ( parser->root.error )
        break;

      if ( *cur == 'S' && ft_strncmp( (char*)cur, "StartData", 9 ) == 0 )
      {
        if ( ft_strncmp( (char*)arg1, "(Hex)", 5 ) == 0 )
          parser->binary_length = ft_atol( (const char *)arg2 );

        limit = parser->root.limit;
        cur   = parser->root.cursor;
        goto Exit;
      }

      cid_parser_skip_PS_token( parser );
      cid_parser_skip_spaces  ( parser );
      arg1 = arg2;
      arg2 = cur;
      cur  = parser->root.cursor;
    }

    /* we haven't found the correct `StartData'; go back and continue */
    /* searching                                                      */
    FT_FRAME_RELEASE( parser->postscript );
    if ( !FT_STREAM_SEEK( offset ) )
      goto Again;

  Exit:
    return error;
  }

开发者ID:allanw1，项目名称:Arianrhod，代码行数:101，代码来源:cidparse.c

示例16: cid_parser_new


//.........这里部分代码省略.........
                if ( p[0] == 'S' && ft_strncmp( (char*)p, "StartData", 9 ) == 0 )
                {
                    /* save offset of binary data after `StartData' */
                    offset += (FT_ULong)( p - buffer + 10 );
                    goto Found;
                }
                else if ( p[1] == 's' && ft_strncmp( (char*)p, "/sfnts", 6 ) == 0 )
                {
                    offset += (FT_ULong)( p - buffer + 7 );
                    goto Found;
                }
            }

            FT_MEM_MOVE( buffer, p, 10 );
            read_len = 256;
            p = buffer + 10;
        }
    }

Found:
    /* We have found the start of the binary data or the `/sfnts' token. */
    /* Now rewind and extract the frame corresponding to this PostScript */
    /* section.                                                          */

    ps_len = offset - base_offset;
    if ( FT_STREAM_SEEK( base_offset )                  ||
            FT_FRAME_EXTRACT( ps_len, parser->postscript ) )
        goto Exit;

    parser->data_offset    = offset;
    parser->postscript_len = ps_len;
    parser->root.base      = parser->postscript;
    parser->root.cursor    = parser->postscript;
    parser->root.limit     = parser->root.cursor + ps_len;
    parser->num_dict       = -1;

    /* Finally, we check whether `StartData' or `/sfnts' was real --  */
    /* it could be in a comment or string.  We also get the arguments */
    /* of `StartData' to find out whether the data is represented in  */
    /* binary or hex format.                                          */

    arg1 = parser->root.cursor;
    cid_parser_skip_PS_token( parser );
    cid_parser_skip_spaces  ( parser );
    arg2 = parser->root.cursor;
    cid_parser_skip_PS_token( parser );
    cid_parser_skip_spaces  ( parser );

    limit = parser->root.limit;
    cur   = parser->root.cursor;

    while ( cur < limit )
    {
        if ( parser->root.error )
        {
            error = parser->root.error;
            goto Exit;
        }

        if ( cur[0] == 'S' && ft_strncmp( (char*)cur, "StartData", 9 ) == 0 )
        {
            if ( ft_strncmp( (char*)arg1, "(Hex)", 5 ) == 0 )
            {
                FT_Long  tmp = ft_atol( (const char *)arg2 );


                if ( tmp < 0 )
                {
                    FT_ERROR(( "cid_parser_new: invalid length of hex data\n" ));
                    error = FT_THROW( Invalid_File_Format );
                }
                else
                    parser->binary_length = (FT_ULong)tmp;
            }

            goto Exit;
        }
        else if ( cur[1] == 's' && ft_strncmp( (char*)cur, "/sfnts", 6 ) == 0 )
        {
            FT_TRACE2(( "cid_parser_new: cannot handle Type 11 fonts\n" ));
            error = FT_THROW( Unknown_File_Format );
            goto Exit;
        }

        cid_parser_skip_PS_token( parser );
        cid_parser_skip_spaces  ( parser );
        arg1 = arg2;
        arg2 = cur;
        cur  = parser->root.cursor;
    }

    /* we haven't found the correct `StartData'; go back and continue */
    /* searching                                                      */
    FT_FRAME_RELEASE( parser->postscript );
    if ( !FT_STREAM_SEEK( offset ) )
        goto Again;

Exit:
    return error;
}

开发者ID:Johnny-Martin，项目名称:ComBase，代码行数:101，代码来源:cidparse.c

示例17: tt_face_load_colr

  tt_face_load_colr( TT_Face    face,
                     FT_Stream  stream )
  {
    FT_Error   error;
    FT_Memory  memory = face->root.memory;

    FT_Byte*  table = NULL;
    FT_Byte*  p     = NULL;

    Colr*  colr = NULL;

    FT_ULong  base_glyph_offset, layer_offset;
    FT_ULong  table_size;


    /* `COLR' always needs `CPAL' */
    if ( !face->cpal )
      return FT_THROW( Invalid_File_Format );

    error = face->goto_table( face, TTAG_COLR, stream, &table_size );
    if ( error )
      goto NoColr;

    if ( table_size < COLR_HEADER_SIZE )
      goto InvalidTable;

    if ( FT_FRAME_EXTRACT( table_size, table ) )
      goto NoColr;

    p = table;

    if ( FT_NEW( colr ) )
      goto NoColr;

    colr->version = FT_NEXT_USHORT( p );
    if ( colr->version != 0 )
      goto InvalidTable;

    colr->num_base_glyphs = FT_NEXT_USHORT( p );
    base_glyph_offset     = FT_NEXT_ULONG( p );

    if ( base_glyph_offset >= table_size )
      goto InvalidTable;
    if ( colr->num_base_glyphs * BASE_GLYPH_SIZE >
           table_size - base_glyph_offset )
      goto InvalidTable;

    layer_offset     = FT_NEXT_ULONG( p );
    colr->num_layers = FT_NEXT_USHORT( p );

    if ( layer_offset >= table_size )
      goto InvalidTable;
    if ( colr->num_layers * LAYER_SIZE > table_size - layer_offset )
      goto InvalidTable;

    colr->base_glyphs = (FT_Byte*)( table + base_glyph_offset );
    colr->layers      = (FT_Byte*)( table + layer_offset      );
    colr->table       = table;
    colr->table_size  = table_size;

    face->colr = colr;

    return FT_Err_Ok;

  InvalidTable:
    error = FT_THROW( Invalid_Table );

  NoColr:
    FT_FRAME_RELEASE( table );
    FT_FREE( colr );

    return error;
  }

开发者ID:ImageMagick，项目名称:ttf，代码行数:73，代码来源:ttcolr.c

注：本文中的FT_FRAME_RELEASE函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ FT_FRAME_USHORT函数代码示例发布时间：2022-05-30

C++ FT_FRAME_EXIT函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18307|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9693|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8189|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8556|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8466|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9407|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8440|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7872|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8424|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7401|2022-11-06

客服电话

电子邮件

C++ FT_FRAME_RELEASE函数代码示例

示例1: tt_face_done

示例2: TT_Face_Done

示例3: fnt_font_done

示例4: CFF_Done_FD_Select

示例5: cff_index_forget_element

示例6: tt_face_done_kern

示例7: CID_Done_Parser

示例8: tt_face_free_colr

示例9: cff_index_done

示例10: fnt_font_done

示例11: tt_face_free_bdf_props

示例12: sfnt_done_face

示例13: tt_face_load_bdf_props

示例14: cid_parser_new

示例15: cid_parser_new

示例16: cid_parser_new

示例17: tt_face_load_colr

请发表评论

全部评论

上一篇：

下一篇：

librespeed/speedtest: Self-hosted Speedt

DeekshithSN/shared-library

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053