本文整理汇总了C++中Free函数的典型用法代码示例。如果您正苦于以下问题:C++ Free函数的具体用法?C++ Free怎么用?C++ Free使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了Free函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: vinum_daemon
void
vinum_daemon(void)
{
int s;
struct daemonq *request;
curproc->p_flag |= P_INMEM | P_SYSTEM; /* we're a system process */
daemon_save_config(); /* start by saving the configuration */
daemonpid = curproc->p_pid; /* mark our territory */
while (1) {
tsleep(&vinum_daemon, PRIBIO, "vinum", 0); /* wait for something to happen */
/*
* It's conceivable that, as the result of an
* I/O error, we'll be out of action long
* enough that another daemon gets started.
* That's OK, just give up gracefully.
*/
if (curproc->p_pid != daemonpid) { /* we've been ousted in our sleep */
if (daemon_options & daemon_verbose)
log(LOG_INFO, "vinum: abdicating\n");
return;
}
while (daemonq != NULL) { /* we have work to do, */
s = splhigh(); /* don't get interrupted here */
request = daemonq; /* get the request */
daemonq = daemonq->next; /* and detach it */
if (daemonq == NULL) /* got to the end, */
dqend = NULL; /* no end any more */
splx(s);
switch (request->type) {
/*
* We had an I/O error on a request. Go through the
* request and try to salvage it
*/
case daemonrq_ioerror:
if (daemon_options & daemon_verbose) {
struct request *rq = request->info.rq;
log(LOG_WARNING,
"vinum: recovering I/O request: %p\n%s dev %d.%d, offset 0x%x, length %ld\n",
rq,
rq->bp->b_flags & B_READ ? "Read" : "Write",
major(rq->bp->b_dev),
minor(rq->bp->b_dev),
rq->bp->b_blkno,
rq->bp->b_bcount);
}
recover_io(request->info.rq); /* the failed request */
break;
/*
* Write the config to disk. We could end up with
* quite a few of these in a row. Only honour the
* last one
*/
case daemonrq_saveconfig:
if ((daemonq == NULL) /* no more requests */
||(daemonq->type != daemonrq_saveconfig)) { /* or the next isn't the same */
if (((daemon_options & daemon_noupdate) == 0) /* we're allowed to do it */
&&((vinum_conf.flags & VF_READING_CONFIG) == 0)) { /* and we're not building the config now */
/*
* We obviously don't want to save a
* partial configuration. Less obviously,
* we don't need to do anything if we're
* asked to write the config when we're
* building it up, because we save it at
* the end.
*/
if (daemon_options & daemon_verbose)
log(LOG_INFO, "vinum: saving config\n");
daemon_save_config(); /* save it */
}
}
break;
case daemonrq_return: /* been told to stop */
if (daemon_options & daemon_verbose)
log(LOG_INFO, "vinum: stopping\n");
daemon_options |= daemon_stopped; /* note that we've stopped */
Free(request);
while (daemonq != NULL) { /* backed up requests, */
request = daemonq; /* get the request */
daemonq = daemonq->next; /* and detach it */
Free(request); /* then free it */
}
wakeup(&vinumclose); /* and wake any waiting vinum(8)s */
return;
case daemonrq_ping: /* tell the caller we're here */
if (daemon_options & daemon_verbose)
log(LOG_INFO, "vinum: ping reply\n");
wakeup(&vinum_finddaemon); /* wake up the caller */
break;
case daemonrq_closedrive: /* close a drive */
close_drive(request->info.drive); /* do it */
break;
//.........这里部分代码省略.........
开发者ID:kame,项目名称:kame,代码行数:101,代码来源:vinumdaemon.c
示例2: stream
/* METODA WCZYTUJ¥CA DANE
Za³o¿enia pliku s¹ proste.
Na pocz¹tku podstawowe dane,
a dalej jedziemy ze œcianami
i ca³¹ reszt¹ danych.
*/
const bool CLevel::LoadLevel( const std::string &filename )
{
if( filename == "" )
{
Log.Error( "GLEVEL( " + file + " ): £añcuch znaków jest pusty!" );
return false;
}
// Najpierw definiujemy wskaŸnik na plik i go otwieramy
std::fstream stream( filename, std::ios::in );
if( !stream )
{
Log.Error( "GLEVEL( " + file + " ): Plik nie istnieje, lub podana œcie¿ka jest b³êdna: " + filename );
return false;
}
// definiujemy zmienne pomocnicze
std::string str;
// Pobieramy wersje poziomu oraz j¹ sprawdzamy
str = GetClearLine( stream );
if( !sscanf_s( str.c_str(), "E3DTLEV=%u", &Version ) )
{
Log.Error( "GLEVEL( " + file + " ): Nieprawid³owy plik poziomu!" );
return false;
}
if( Version > GAME_VERSION )
{
Log.Error( "GLEVEL( " + file + " ): Zbyt wysoka wersja pliku!" );
return false;
}
/* Wczeœnijsze if'y by³y, by uzyskaæ pewnoœæ,
¿e wszystko z nowym plikiem jest w porz¹dku.
Dlaczego tyle zachodu? By unikn¹æ sytuacji,
kiedy ³adujemy plik, na ju¿ istniej¹cy level.
Level istnieje, wiêc go kasujemy i czytamy plik.
A teraz Zonk! Nie ma pliku! I co? zostajemy na
lodzie bez levelu :). Teraz wiecie o co chodzi :)
*/
if( loaded )
{
Log.Report( "GLEVEL( " + file + " ): Prze³adowanie poziomu na : " + filename );
Free();
Player.Reset();
}
Log.Log( "GLEVEL( " + file + " ): Wczytywanie poziomu: " + filename );
//GUI.SendConMsg( "Wczytywanie poziomu: " + filename, false );
file = filename;
while( stream )
{
str = GetLine( stream );
if( str == "END E3DTLEV" )
break;
str = ClearWhiteSpace( str );
if( str == "HEADER" )
{
if( !LoadHeader( stream ) )
{
Log.Error( "GLEVEL( " + file + " ): B³¹d odczytu nag³ówka!" );
continue;
}
}
else if( str == "TEXTURES" )
{
if( !LoadTextures( stream ) )
{
Log.Error( "GLEVEL( " + file + " ): B³¹d odczytu tekstur!" );
continue;
}
}
else if( str == "WALLS" )
{
if( !LoadWalls( stream ) )
{
Log.Error( "GLEVEL( " + file + " ): B³¹d odczytu œcian!" );
continue;
}
}
else if( str == "ITEMLIST" )
{
if( !LoadItemList( stream ) )
{
Log.Error( "GLEVEL( " + file + " ): B³¹d odczytu listy przedmiotów!" );
continue;
}
}
//.........这里部分代码省略.........
开发者ID:realn,项目名称:exptor3D,代码行数:101,代码来源:Level.cpp
示例3: TXUfree
void TXUfree(void)
{ if(TXUok!=TRUE) Bug("TXUok");
Free(TXUpat);
Free(TXUtex);
TXUok=FALSE;
}
开发者ID:AlexMax,项目名称:deutex,代码行数:6,代码来源:texture.c
示例4: Free
XnDeviceModule::~XnDeviceModule()
{
Free();
}
开发者ID:DogfishLab88,项目名称:debian-openni-sensor-avin2-sensorkinect,代码行数:4,代码来源:XnDeviceModule.cpp
示例5: int
Room *load_RoomData(char *filename, unsigned int number, int flags) {
Room *r;
File *f;
int (*load_func)(File *, Room *, int) = NULL;
int version;
if (filename == NULL || !*filename || (r = new_Room()) == NULL)
return NULL;
if ((f = Fopen(filename)) == NULL) {
destroy_Room(r);
return NULL;
}
r->number = number;
version = fileformat_version(f);
switch(version) {
case -1:
log_err("load_RoomData(): error trying to determine file format version of %s", filename);
load_func = NULL;
break;
case 0:
Frewind(f);
load_func = load_RoomData_version0;
break;
case 1:
load_func = load_RoomData_version1;
break;
default:
log_err("load_RoomData(): don't know how to load version %d of %s", version, filename);
}
if (load_func != NULL && !load_func(f, r, flags)) {
Fclose(f);
r->flags &= ROOM_ALL;
/*
force the room name for Mail> and Home>
so that find_abbrevRoom() won't act strangely when these names are different in the files
for some strange reason
*/
if (r->number == MAIL_ROOM) {
Free(r->name);
r->name = cstrdup("Mail");
}
if (r->number == HOME_ROOM) {
Free(r->name);
r->name = cstrdup("Home");
}
if (r->number == MAIL_ROOM)
r->max_msgs = PARAM_MAX_MAIL_MSGS;
else
if (r->max_msgs < 1)
r->max_msgs = PARAM_MAX_MESSAGES;
if (PARAM_HAVE_CHATROOMS && (r->flags & ROOM_CHATROOM) && r->chat_history == NULL)
r->chat_history = new_StringQueue();
if (!PARAM_HAVE_CHATROOMS && (r->flags & ROOM_CHATROOM) && r->number != HOME_ROOM) {
r->flags &= ~ROOM_CHATROOM;
r->flags |= ROOM_DIRTY;
}
(void)sort_StringList(&r->room_aides, alphasort_StringList);
(void)sort_StringList(&r->invited, alphasort_StringList);
(void)sort_StringList(&r->kicked, alphasort_StringList);
return r;
}
destroy_Room(r);
Fclose(f);
return NULL;
}
开发者ID:walterdejong,项目名称:bbs100,代码行数:72,代码来源:Room.c
示例6: Win32LoadSecModule
// Load the device module
bool Win32LoadSecModule(SECURE *sec)
{
SEC_DATA_WIN32 *w;
HINSTANCE hInst;
CK_FUNCTION_LIST_PTR api = NULL;
CK_RV (*get_function_list)(CK_FUNCTION_LIST_PTR_PTR);
// Validate arguments
if (sec == NULL)
{
return false;
}
if (sec->Dev->Id == 9)
{
char username[MAX_SIZE];
DWORD size;
// Because the device driver of Juki-Net needs the contents
// of the Software\JPKI registry key on HKLU of SYSTEM,
// if there is no key, copy the key from the value of other user
// if (MsRegIsValue(REG_CURRENT_USER, "Software\\JPKI", "Name") == false ||
// MsRegIsValue(REG_CURRENT_USER, "Software\\JPKI", "RWType") == false)
size = sizeof(username);
GetUserName(username, &size);
if (StrCmpi(username, "System") == 0)
{
TOKEN_LIST *t = MsRegEnumKey(REG_USERS, NULL);
if (t != NULL)
{
UINT i;
for (i = 0;i < t->NumTokens;i++)
{
char tmp[MAX_PATH];
if (StrCmpi(t->Token[i], ".DEFAULT") != 0 && StrCmpi(t->Token[i], "S-1-5-18") != 0)
{
Format(tmp, sizeof(tmp), "%s\\Software\\JPKI", t->Token[i]);
if (MsRegIsValue(REG_USERS, tmp, "Name") && MsRegIsValue(REG_USERS, tmp, "RWType"))
{
char *name = MsRegReadStr(REG_USERS, tmp, "Name");
char *port = MsRegReadStr(REG_USERS, tmp, "Port");
UINT type = MsRegReadInt(REG_USERS, tmp, "RWType");
MsRegWriteStr(REG_CURRENT_USER, "Software\\JPKI", "Name", name);
MsRegWriteStr(REG_CURRENT_USER, "Software\\JPKI", "Port", port);
MsRegWriteInt(REG_CURRENT_USER, "Software\\JPKI", "RWType", type);
Free(name);
Free(port);
break;
}
}
}
FreeToken(t);
}
}
}
// Load the Library
hInst = Win32SecureLoadLibraryEx(sec->Dev->ModuleName, 0);
if (hInst == NULL)
{
// Failure
return false;
}
// Get the API
get_function_list = (CK_RV (*)(CK_FUNCTION_LIST_PTR_PTR))
GetProcAddress(hInst, "C_GetFunctionList");
if (get_function_list == NULL)
{
// Failure
FreeLibrary(hInst);
return false;
}
get_function_list(&api);
if (api == NULL)
{
// Failure
FreeLibrary(hInst);
return false;
}
sec->Data = ZeroMalloc(sizeof(SEC_DATA_WIN32));
w = sec->Data;
w->hInst = hInst;
sec->Api = api;
return true;
}
开发者ID:13eatrice,项目名称:SoftEtherVPN,代码行数:97,代码来源:Secure.c
示例7: SDLGL_OpenVideo
//.........这里部分代码省略.........
if (flags & AG_VIDEO_OVERLAY)
dsw->flags |= AG_DRIVER_SW_OVERLAY;
if (flags & AG_VIDEO_BGPOPUPMENU)
dsw->flags |= AG_DRIVER_SW_BGPOPUP;
/* Apply the output capture settings. */
if (AG_Defined(drv, "out")) {
char *ext;
AG_GetString(drv, "out", buf, sizeof(buf));
if ((ext = strrchr(buf, '.')) != NULL &&
ext[1] != '\0') {
if (Strcasecmp(&ext[1], "jpeg") == 0 ||
Strcasecmp(&ext[1], "jpg") == 0) {
sgl->outMode = AG_SDLGL_OUT_JPEG;
if ((sgl->outPath = TryStrdup(buf)) == NULL)
return (-1);
} else if (Strcasecmp(&ext[1], "png") == 0) {
sgl->outMode = AG_SDLGL_OUT_PNG;
if ((sgl->outPath = TryStrdup(buf)) == NULL)
return (-1);
} else {
AG_SetError("Invalid out= argument: `%s'", buf);
return (-1);
}
if (AG_Defined(drv, "outFirst")) {
AG_GetString(drv, "outFirst", buf, sizeof(buf));
sgl->outFrame = atoi(buf);
} else {
sgl->outFrame = 0;
}
if (AG_Defined(drv, "outLast")) {
AG_GetString(drv, "outLast", buf, sizeof(buf));
sgl->outLast = atoi(buf);
}
}
}
/* Set the video mode. Force hardware palette in 8bpp. */
AG_SDL_GetPrefDisplaySettings(drv, &w, &h, &depth);
Verbose(_("SDLGL: Setting mode %ux%u (%d bpp)\n"), w, h, depth);
newDepth = SDL_VideoModeOK(w, h, depth, sFlags);
if (newDepth == 8) {
Verbose(_("Enabling hardware palette"));
sFlags |= SDL_HWPALETTE;
}
if ((sgl->s = SDL_SetVideoMode((int)w, (int)h, newDepth, sFlags))
== NULL) {
AG_SetError("Setting %dx%dx%d mode: %s", w, h, newDepth,
SDL_GetError());
return (-1);
}
SDL_EnableUNICODE(1);
if ((drv->videoFmt = AG_SDL_GetPixelFormat(sgl->s)) == NULL) {
goto fail;
}
dsw->w = sgl->s->w;
dsw->h = sgl->s->h;
dsw->depth = (Uint)drv->videoFmt->BitsPerPixel;
Verbose(_("SDLGL: New display (%dbpp)\n"),
(int)drv->videoFmt->BitsPerPixel);
/* Create the cursors. */
if (AG_SDL_InitDefaultCursor(sgl) == -1 ||
AG_InitStockCursors(drv) == -1)
goto fail;
/* Set background color. */
dsw->bgColor = AG_ColorFromString(AG_GetStringP(drv,"bgColor"), NULL);
/* Initialize our OpenGL context and viewport. */
if (AG_GL_InitContext(sgl, &sgl->gl) == -1) {
goto fail;
}
AG_GL_SetViewport(&sgl->gl, AG_RECT(0, 0, dsw->w, dsw->h));
if (!(dsw->flags & AG_DRIVER_SW_OVERLAY))
ClearBackground(dsw);
/* Initialize the output capture buffer. */
Free(sgl->outBuf);
if ((sgl->outBuf = AG_TryMalloc(dsw->w*dsw->h*4)) == NULL) {
AG_Verbose("Out of memory for buffer; disabling capture\n");
sgl->outMode = AG_SDLGL_OUT_NONE;
}
if (flags & AG_VIDEO_FULLSCREEN) {
if (SDL_WM_ToggleFullScreen(sgl->s))
dsw->flags |= AG_DRIVER_SW_FULLSCREEN;
}
return (0);
fail:
if (drv->videoFmt) {
AG_PixelFormatFree(drv->videoFmt);
drv->videoFmt = NULL;
}
return (-1);
}
开发者ID:varialus,项目名称:agar,代码行数:101,代码来源:drv_sdlgl.c
示例8: Free
//********************************************
// Destructor
//********************************************
Texture::~Texture()
{
Free();
}
开发者ID:Asuzer,项目名称:cgal,代码行数:7,代码来源:texture.cpp
示例9: TEXT
//.........这里部分代码省略.........
}
}
}
}
lastRenderTarget = curRenderTarget;
if(curRenderTarget == (NUM_RENDER_BUFFERS-1))
curRenderTarget = 0;
else
curRenderTarget++;
if(bUpdateBPS || !CloseDouble(curStrain, lastStrain) || curFramesDropped != lastFramesDropped)
{
PostMessage(hwndMain, OBS_UPDATESTATUSBAR, 0, 0);
lastStrain = curStrain;
lastFramesDropped = curFramesDropped;
}
//------------------------------------
// we're about to sleep so we should flush the d3d command queue
profileIn("flush");
GetD3D()->Flush();
profileOut;
profileOut;
profileOut; //frame
//------------------------------------
// frame sync
QWORD renderStopTime = GetQPCTimeNS();
if(bWasLaggedFrame = (frameDelta > frameLengthNS))
{
numLongFrames++;
if(bLogLongFramesProfile && (numLongFrames/float(max(1, numTotalFrames)) * 100.) > logLongFramesProfilePercentage)
DumpLastProfileData();
}
//OSDebugOut(TEXT("Frame adjust time: %d, "), frameTimeAdjust-totalTime);
numTotalFrames++;
}
DisableProjector();
//encodeThreadProfiler.reset();
if(!bUsing444)
{
if(bUseThreaded420)
{
for(int i=0; i<numThreads; i++)
{
if(h420Threads[i])
{
convertInfo[i].bKillThread = true;
SetEvent(convertInfo[i].hSignalConvert);
OSTerminateThread(h420Threads[i], 10000);
h420Threads[i] = NULL;
}
if(convertInfo[i].hSignalConvert)
{
CloseHandle(convertInfo[i].hSignalConvert);
convertInfo[i].hSignalConvert = NULL;
}
if(convertInfo[i].hSignalComplete)
{
CloseHandle(convertInfo[i].hSignalComplete);
convertInfo[i].hSignalComplete = NULL;
}
}
if(!bFirstEncode)
{
ID3D10Texture2D *copyTexture = copyTextures[curCopyTexture];
copyTexture->Unmap(0);
}
}
if(bUsingQSV)
for(int i = 0; i < NUM_OUT_BUFFERS; i++)
delete outPics[i].mfxOut;
else
for(int i=0; i<NUM_OUT_BUFFERS; i++)
{
x264_picture_clean(outPics[i].picOut);
delete outPics[i].picOut;
}
}
Free(h420Threads);
Free(convertInfo);
Log(TEXT("Total frames rendered: %d, number of late frames: %d (%0.2f%%) (it's okay for some frames to be late)"), numTotalFrames, numLongFrames, (double(numLongFrames)/double(numTotalFrames))*100.0);
}
开发者ID:lynnl87,项目名称:OBS,代码行数:101,代码来源:OBSVideoCapture.cpp
示例10: read_config
//.........这里部分代码省略.........
"Value out of range");
return 0;
} else {
int level =
(int) lval;
srv->threads = level;
}
} else {
traceLog(LOG_ERR, err_msg, n,
"Non numeric specification");
return 0;
}
break;
case SSLVERIFYDEPTH:
if (numstr(cp, &lval) == SPOCP_SUCCESS) {
if (lval > 0L) {
srv->sslverifydepth =
(unsigned int) lval;
} else {
traceLog(LOG_ERR, err_msg, n,
"number out of range");
srv->sslverifydepth = 0;
}
} else {
traceLog(LOG_ERR, err_msg, n,
"Non numeric value");
}
break;
case PIDFILE:
if (srv->pidfile)
Free(srv->pidfile);
srv->pidfile = Strdup(cp);
break;
case MAXCONN:
if (numstr(cp, &lval) == SPOCP_SUCCESS) {
if (lval > 0L) {
srv->nconn =
(unsigned int) lval;
} else {
traceLog(LOG_ERR, err_msg, n,
"Number out of range");
srv->sslverifydepth = 0;
}
} else {
traceLog(LOG_ERR, err_msg, n,
"Non numeric value");
}
break;
#ifdef HAVE_SSL
case CLIENTCERT:
if (strcasecmp(cp, "none") == 0)
srv->clientcert = NONE;
else if (strcasecmp(cp, "demand") == 0)
srv->clientcert = DEMAND;
else if (strcasecmp(cp, "hard") == 0)
srv->clientcert = HARD;
break;
#endif
case NAME:
if (srv->name)
开发者ID:Zabrane,项目名称:SPOCP,代码行数:67,代码来源:config.c
示例11: Free
CLibrary::~CLibrary()
{
Free();
}
开发者ID:SamVanheer,项目名称:HL_Tools,代码行数:4,代码来源:CLibrary.cpp
示例12: md_create
//.........这里部分代码省略.........
{
char mn[MAXNAMELEN + 1];
char path[PATH_MAX + 1];
char set_path[PATH_MAX +1];
char sym_path[PATH_MAX + 1];
int set = -1, ret;
char *type, *dir;
char *device_name;
dev_t minor_devt = di_minor_devt(minor);
int key;
mdsetname_t *sp = NULL;
md_error_t ep;
/*
* Initialize sdssc entry points. Don't worry about the return
* value here since the interface functions will get initialized
* correctly regardless.
*/
(void) sdssc_bind_library();
(void) strcpy(mn, di_minor_name(minor));
/*
* Check whether we are being requested to setup the admin
* device link or one of the metadevice links. They need
* to be treated differently.
*/
if (strcmp(mn, "admin") == 0) {
/* there is only one admin link and always in /dev/md/admin */
(void) devfsadm_mklink("md/admin", node, minor, 0);
} else {
/*
* Extract out the minor components and create the
* appropriate links. The node looks like:
* [email protected]<set>,<mdev>,<type>
* where the <set> number is the named diskset,
* <mdev> is the metadevice number, and <type>
* is the trailing "blk" or "raw" indication.
*
* NOTE: when <set> is non-zero, we need to create
* under the "shared" directory entry instead of linking
* into the top level dsk/rdsk directories.
*/
ret = sscanf(mn, "%d,", &set);
if (ret == 1 && (type = strrchr(mn, ',')) != NULL) {
type++;
if (strcmp(type, "blk") == 0) {
dir = "dsk";
} else {
dir = "rdsk";
}
(void) memset(&ep, '\0', sizeof (ep));
if ((device_name = meta_getnmentbydev(set,
MD_SIDEWILD, minor_devt, NULL, NULL,
&key, &ep)) == NULL) {
(void) close_admin(&ep);
return (DEVFSADM_CONTINUE);
}
if (set == 0) {
/* this is a simple md */
(void) snprintf(path, sizeof (path),
"md/%s/%s", dir, basename(device_name));
} else {
/* this is a shared md */
(void) snprintf(path, sizeof (path),
"md/shared/%d/%s/%s", set, dir,
basename(device_name));
/*
* flush the caches so the next call to
* metasetnosetname will get us the
* updated cache.
*/
metaflushnames(0);
if ((sp = metasetnosetname(set, &ep))
!= NULL) {
(void) snprintf(set_path,
sizeof (set_path), "md/shared/%d",
sp->setno);
(void) snprintf(sym_path,
sizeof (sym_path), "md/%s",
sp->setname);
}
}
(void) devfsadm_mklink(path, node, minor, 0);
Free(device_name);
if (sp != NULL) {
(void) devfsadm_secondary_link(sym_path,
set_path, 0);
}
}
}
(void) close_admin(&ep);
return (DEVFSADM_CONTINUE);
}
开发者ID:alhazred,项目名称:onarm,代码行数:101,代码来源:md_link.c
示例13: Free
VBObject::~VBObject(void)
{
Free();
}
开发者ID:ZYMing,项目名称:OpenGL-Shader,代码行数:4,代码来源:vbm.cpp
示例14: main
int main(int argc, char** argv) {
leveldb_t* db;
leveldb_comparator_t* cmp;
leveldb_cache_t* cache;
leveldb_env_t* env;
leveldb_options_t* options;
leveldb_readoptions_t* roptions;
leveldb_writeoptions_t* woptions;
char* err = NULL;
snprintf(dbname, sizeof(dbname), "/tmp/leveldb_c_test-%d",
((int) geteuid()));
StartPhase("create_objects");
cmp = leveldb_comparator_create(NULL, CmpDestroy, CmpCompare, CmpName);
env = leveldb_create_default_env();
cache = leveldb_cache_create_lru(100000);
options = leveldb_options_create();
leveldb_options_set_comparator(options, cmp);
leveldb_options_set_error_if_exists(options, 1);
leveldb_options_set_cache(options, cache);
leveldb_options_set_env(options, env);
leveldb_options_set_info_log(options, NULL);
leveldb_options_set_write_buffer_size(options, 100000);
leveldb_options_set_paranoid_checks(options, 1);
leveldb_options_set_max_open_files(options, 10);
leveldb_options_set_block_size(options, 1024);
leveldb_options_set_block_restart_interval(options, 8);
leveldb_options_set_compression(options, leveldb_no_compression);
roptions = leveldb_readoptions_create();
leveldb_readoptions_set_verify_checksums(roptions, 1);
leveldb_readoptions_set_fill_cache(roptions, 0);
woptions = leveldb_writeoptions_create();
leveldb_writeoptions_set_sync(woptions, 1);
StartPhase("destroy");
leveldb_destroy_db(options, dbname, &err);
Free(&err);
StartPhase("open_error");
db = leveldb_open(options, dbname, &err);
CheckCondition(err != NULL);
Free(&err);
StartPhase("open");
leveldb_options_set_create_if_missing(options, 1);
db = leveldb_open(options, dbname, &err);
CheckNoError(err);
CheckGet(db, roptions, "foo", NULL);
StartPhase("put");
leveldb_put(db, woptions, "foo", 3, "hello", 5, &err);
CheckNoError(err);
CheckGet(db, roptions, "foo", "hello");
StartPhase("writebatch");
{
leveldb_writebatch_t* wb = leveldb_writebatch_create();
leveldb_writebatch_put(wb, "foo", 3, "a", 1);
leveldb_writebatch_clear(wb);
leveldb_writebatch_put(wb, "bar", 3, "b", 1);
leveldb_writebatch_put(wb, "box", 3, "c", 1);
leveldb_writebatch_delete(wb, "bar", 3);
leveldb_write(db, woptions, wb, &err);
CheckNoError(err);
CheckGet(db, roptions, "foo", "hello");
CheckGet(db, roptions, "bar", NULL);
CheckGet(db, roptions, "box", "c");
int pos = 0;
leveldb_writebatch_iterate(wb, &pos, CheckPut, CheckDel);
CheckCondition(pos == 3);
leveldb_writebatch_destroy(wb);
}
StartPhase("iter");
{
leveldb_iterator_t* iter = leveldb_create_iterator(db, roptions);
CheckCondition(!leveldb_iter_valid(iter));
leveldb_iter_seek_to_first(iter);
CheckCondition(leveldb_iter_valid(iter));
CheckIter(iter, "box", "c");
leveldb_iter_next(iter);
CheckIter(iter, "foo", "hello");
leveldb_iter_prev(iter);
CheckIter(iter, "box", "c");
leveldb_iter_prev(iter);
CheckCondition(!leveldb_iter_valid(iter));
leveldb_iter_seek_to_last(iter);
CheckIter(iter, "foo", "hello");
leveldb_iter_seek(iter, "b", 1);
CheckIter(iter, "box", "c");
leveldb_iter_get_error(iter, &err);
CheckNoError(err);
leveldb_iter_destroy(iter);
}
StartPhase("approximate_sizes");
//.........这里部分代码省略.........
开发者ID:0xffffffff,项目名称:rtbkit,代码行数:101,代码来源:c_test.c
示例15: Free
/** Virtual destructor calls Free() to delete the objects contained
in the linked list, in a thread-safe manner.*/
virtual ~VCriticalLinkedListManager()
{ Free(); }
开发者ID:OCLC-Developer-Network,项目名称:MARCView-Convert,代码行数:4,代码来源:vcriticallinkedlistmanager.hpp
示例16: Free
CEncoder::~CEncoder()
{
Free();
}
开发者ID:670232921,项目名称:pfm_archive,代码行数:4,代码来源:BZip2Encoder.cpp
示例17: Free
/*
================
idEvent::~idEvent()
================
*/
idEvent::~idEvent() {
Free();
}
开发者ID:iodoom-gitorious,项目名称:windowshasyous-dhewg-iodoom3,代码行数:8,代码来源:Event.cpp
示例18: finalizeIAL
void finalizeIAL(IntArrayList *a) {
Free(a->p);
}
开发者ID:CompBioUIC,项目名称:CommDy,代码行数:3,代码来源:IntArrayList.c
示例19: Free
RobotManager::~RobotManager(void)
{
Free();
}
开发者ID:zhangqiaoli,项目名称:robot,代码行数:4,代码来源:RobotManager.cpp
示例20: Free
bool DHCPOptionParser::Parse( struct dhcp_packet *dp )
{
int code;
int len;
unsigned char *data;
int i, j;
if( memcmp( dp->options, DHCP_OPTIONS_COOKIE, 4 ))
return false;
Free();
for( i = 4; ( code = dp->options[ i++ ]) != DHO_END; )
{
if( code == DHO_PAD )
continue;
len = dp->options[ i++ ];
data = &dp->options[ i ];
switch( code )
{
case DHO_DHCP_MESSAGE_TYPE :
mMsgType = *data;
break;
case DHO_DHCP_SERVER_IDENTIFIER :
mSID = *reinterpret_cast< struct in_addr * >( data );
break;
case DHO_DHCP_LEASE_TIME :
mLeaseTime = *reinterpret_cast< u_int32_t * >( data );
break;
case DHO_SUBNET_MASK :
mSubnetMask = *reinterpret_cast< struct in_addr * >( data );
break;
case DHO_ROUTERS :
{
mRouterCount = static_cast< u_int8_t >( len / 4 );
mRouterList = new struct in_addr[ mRouterCount ];
for( j = 0; j < len; j += 4 )
mRouterList[ j / 4 ] = *reinterpret_cast
< struct in_addr *>
( &data[ j ]);
break;
}
case DHO_DOMAIN_NAME_SERVERS :
{
mDNSCount = static_cast< u_int8_t >( len / 4 );
mDNSList = new struct in_addr[ mDNSCount ];
for( j = 0; j < len; j += 4 )
mDNSList[ j / 4 ] = *reinterpret_cast
< struct in_addr *>( &data[ j ]);
break;
}
case DHO_DOMAIN_NAME :
mDomainName = new char[ len + 1 ]();
memcpy( mDomainName, data, len );
break;
}
i += len;
}
return true;
}
开发者ID:komh,项目名称:kipcfg,代码行数:70,代码来源:dhcp_options.cpp
注:本文中的Free函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论