• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号

C++ FreeDir函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中FreeDir函数的典型用法代码示例。如果您正苦于以下问题:C++ FreeDir函数的具体用法?C++ FreeDir怎么用?C++ FreeDir使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了FreeDir函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: nodeCheckCleanup

static void 
nodeCheckCleanup(Datum arg)
{
	node_check_data *fdata = (node_check_data*) DatumGetPointer(arg);
	
	if (fdata->databaseDir != NULL)
	{
		FreeDir(fdata->databaseDir);
		fdata->databaseDir = NULL;
	}
	if (fdata->tablespaceDir != NULL)
	{
		FreeDir(fdata->tablespaceDir);
		fdata->tablespaceDir = NULL;
	}
	if (fdata->scandesc != NULL)
	{
		heap_endscan(fdata->scandesc);
		fdata->scandesc = NULL;
	}
	if (fdata->tablespaceRelation != NULL)
	{
		heap_close(fdata->tablespaceRelation, AccessShareLock);
		fdata->tablespaceRelation = NULL;
	}
	pfree(fdata);
}
开发者ID:50wu,项目名称:gpdb,代码行数:27,代码来源:persistentutil.c


示例2: DeleteAllExportedSnapshotFiles

/*
 * DeleteAllExportedSnapshotFiles
 *		Clean up any files that have been left behind by a crashed backend
 *		that had exported snapshots before it died.
 *
 * This should be called during database startup or crash recovery.
 */
void
DeleteAllExportedSnapshotFiles(void)
{
	char		buf[MAXPGPATH];
	DIR		   *s_dir;
	struct dirent *s_de;

	if (!(s_dir = AllocateDir(SNAPSHOT_EXPORT_DIR)))
	{
		/*
		 * We really should have that directory in a sane cluster setup. But
		 * then again if we don't, it's not fatal enough to make it FATAL.
		 * Since we're running in the postmaster, LOG is our best bet.
		 */
		elog(LOG, "could not open directory \"%s\": %m", SNAPSHOT_EXPORT_DIR);
		return;
	}

	while ((s_de = ReadDir(s_dir, SNAPSHOT_EXPORT_DIR)) != NULL)
	{
		if (strcmp(s_de->d_name, ".") == 0 ||
			strcmp(s_de->d_name, "..") == 0)
			continue;

		snprintf(buf, MAXPGPATH, SNAPSHOT_EXPORT_DIR "/%s", s_de->d_name);
		/* Again, unlink failure is not worthy of FATAL */
		if (unlink(buf))
			elog(LOG, "could not unlink file \"%s\": %m", buf);
	}

	FreeDir(s_dir);
}
开发者ID:avontd2868,项目名称:postgres,代码行数:39,代码来源:snapmgr.c


示例3: pg_start_backup

/*
 * pg_start_backup: set up for taking an on-line backup dump
 *
 * Essentially what this does is to create a backup label file in $PGDATA,
 * where it will be archived as part of the backup dump.  The label file
 * contains the user-supplied label string (typically this would be used
 * to tell where the backup dump will be stored) and the starting time and
 * starting WAL location for the dump.
 */
Datum
pg_start_backup(PG_FUNCTION_ARGS)
{
	text	   *backupid = PG_GETARG_TEXT_P(0);
	bool		fast = PG_GETARG_BOOL(1);
	char	   *backupidstr;
	XLogRecPtr	startpoint;
	DIR		   *dir;

	backupidstr = text_to_cstring(backupid);

	if (!superuser() && !has_rolreplication(GetUserId()))
		ereport(ERROR,
				(errcode(ERRCODE_INSUFFICIENT_PRIVILEGE),
		   errmsg("must be superuser or replication role to run a backup")));

	/* Make sure we can open the directory with tablespaces in it */
	dir = AllocateDir("pg_tblspc");
	if (!dir)
		ereport(ERROR,
				(errmsg("could not open directory \"%s\": %m", "pg_tblspc")));

	startpoint = do_pg_start_backup(backupidstr, fast, NULL, NULL,
									dir, NULL, NULL, false, true);

	FreeDir(dir);

	PG_RETURN_LSN(startpoint);
}
开发者ID:5A68656E67,项目名称:postgres,代码行数:38,代码来源:xlogfuncs.c


示例4: SlruScanDirectory

/*
 * Scan the SimpleLRU directory and apply a callback to each file found in it.
 *
 * If the callback returns true, the scan is stopped.  The last return value
 * from the callback is returned.
 *
 * Note that the ordering in which the directory is scanned is not guaranteed.
 *
 * Note that no locking is applied.
 */
bool
SlruScanDirectory(SlruCtl ctl, SlruScanCallback callback, void *data)
{
	bool		retval = false;
	DIR		   *cldir;
	struct dirent *clde;
	int			segno;
	int			segpage;

	cldir = AllocateDir(ctl->Dir);
	while ((clde = ReadDir(cldir, ctl->Dir)) != NULL)
	{
		if (strlen(clde->d_name) == 4 &&
			strspn(clde->d_name, "0123456789ABCDEF") == 4)
		{
			segno = (int) strtol(clde->d_name, NULL, 16);
			segpage = segno * SLRU_PAGES_PER_SEGMENT;

			elog(DEBUG2, "SlruScanDirectory invoking callback on %s/%s",
				 ctl->Dir, clde->d_name);
			retval = callback(ctl, clde->d_name, segpage, data);
			if (retval)
				break;
		}
	}
	FreeDir(cldir);

	return retval;
}
开发者ID:panyx0718,项目名称:shadow,代码行数:39,代码来源:slru.c


示例5: db_dir_size

/* Return physical size of directory contents, or 0 if dir doesn't exist */
static int64
db_dir_size(const char *path)
{
	int64		dirsize = 0;
	struct dirent *direntry;
	DIR		   *dirdesc;
	char		filename[MAXPGPATH];

	dirdesc = AllocateDir(path);

	if (!dirdesc)
		return 0;

	while ((direntry = ReadDir(dirdesc, path)) != NULL)
	{
		struct stat fst;

		if (strcmp(direntry->d_name, ".") == 0 ||
			strcmp(direntry->d_name, "..") == 0)
			continue;

		snprintf(filename, MAXPGPATH, "%s/%s", path, direntry->d_name);

		if (stat(filename, &fst) < 0)
			ereport(ERROR,
					(errcode_for_file_access(),
					 errmsg("could not stat file \"%s\": %m", filename)));

		dirsize += fst.st_size;
	}

	FreeDir(dirdesc);
	return dirsize;
}
开发者ID:shubham2094,项目名称:postgresql_8.2,代码行数:35,代码来源:dbsize.c


示例6: database_size

Datum
database_size(PG_FUNCTION_ARGS)
{
	Name		dbname = PG_GETARG_NAME(0);

	Oid			dbid;
	char	   *dbpath;
	DIR		   *dirdesc;
	struct dirent *direntry;
	int64		totalsize;

	dbid = get_database_oid(NameStr(*dbname));
	if (!OidIsValid(dbid))
		ereport(ERROR,
				(errcode(ERRCODE_UNDEFINED_DATABASE),
			errmsg("database \"%s\" does not exist", NameStr(*dbname))));

	dbpath = GetDatabasePath(dbid);

	dirdesc = AllocateDir(dbpath);
	if (!dirdesc)
		ereport(ERROR,
				(errcode_for_file_access(),
				 errmsg("could not open directory \"%s\": %m", dbpath)));

	totalsize = 0;
	for (;;)
	{
		char	   *fullname;
		struct stat statbuf;

		errno = 0;
		direntry = readdir(dirdesc);
		if (!direntry)
		{
			if (errno)
				ereport(ERROR,
						(errcode_for_file_access(),
						 errmsg("error reading directory: %m")));
			else
				break;
		}

		fullname = psnprintf(strlen(dbpath) + 1 + strlen(direntry->d_name) + 1,
							 "%s/%s", dbpath, direntry->d_name);
		if (stat(fullname, &statbuf) == -1)
			ereport(ERROR,
					(errcode_for_file_access(),
					 errmsg("could not stat \"%s\": %m", fullname)));

		totalsize += statbuf.st_size;
		pfree(fullname);
	}

	FreeDir(dirdesc);

	PG_RETURN_INT64(totalsize);
}
开发者ID:sunyangkobe,项目名称:cscd43,代码行数:58,代码来源:dbsize.c


示例7: pg_ls_dir

/*
 * List a directory (returns the filenames only)
 */
Datum
pg_ls_dir(PG_FUNCTION_ARGS)
{
	FuncCallContext *funcctx;
	struct dirent *de;
	directory_fctx *fctx;

	if (!superuser())
		ereport(ERROR,
				(errcode(ERRCODE_INSUFFICIENT_PRIVILEGE),
				 (errmsg("must be superuser to get directory listings"))));

	if (SRF_IS_FIRSTCALL())
	{
		MemoryContext oldcontext;

		funcctx = SRF_FIRSTCALL_INIT();
		oldcontext = MemoryContextSwitchTo(funcctx->multi_call_memory_ctx);

		fctx = palloc(sizeof(directory_fctx));
		fctx->location = convert_and_check_filename(PG_GETARG_TEXT_P(0));

		fctx->dirdesc = AllocateDir(fctx->location);

		if (!fctx->dirdesc)
			ereport(ERROR,
					(errcode_for_file_access(),
					 errmsg("could not open directory \"%s\": %m",
							fctx->location)));

		funcctx->user_fctx = fctx;
		MemoryContextSwitchTo(oldcontext);
	}

	funcctx = SRF_PERCALL_SETUP();
	fctx = (directory_fctx *) funcctx->user_fctx;

	while ((de = ReadDir(fctx->dirdesc, fctx->location)) != NULL)
	{
		int			len = strlen(de->d_name);
		text	   *result;

		if (strcmp(de->d_name, ".") == 0 ||
			strcmp(de->d_name, "..") == 0)
			continue;

		result = palloc(len + VARHDRSZ);
		SET_VARSIZE(result, len + VARHDRSZ);
		memcpy(VARDATA(result), de->d_name, len);

		SRF_RETURN_NEXT(funcctx, PointerGetDatum(result));
	}

	FreeDir(fctx->dirdesc);

	SRF_RETURN_DONE(funcctx);
}
开发者ID:karthijrk,项目名称:gpdb,代码行数:60,代码来源:genfile.c


示例8: calculate_tablespace_size

/*
 * calculate total size of tablespace
 */
static int64
calculate_tablespace_size(Oid tblspcOid)
{
	char		tblspcPath[MAXPGPATH];
	char		pathname[MAXPGPATH];
	int64		totalsize = 0;
	DIR		   *dirdesc;
	struct dirent *direntry;

	if (tblspcOid == DEFAULTTABLESPACE_OID)
		snprintf(tblspcPath, MAXPGPATH, "base");
	else if (tblspcOid == GLOBALTABLESPACE_OID)
		snprintf(tblspcPath, MAXPGPATH, "global");
	else
		snprintf(tblspcPath, MAXPGPATH, "pg_tblspc/%u", tblspcOid);

	dirdesc = AllocateDir(tblspcPath);

	if (!dirdesc)
		ereport(ERROR,
				(errcode_for_file_access(),
				 errmsg("could not open tablespace directory \"%s\": %m",
						tblspcPath)));

	while ((direntry = ReadDir(dirdesc, tblspcPath)) != NULL)
	{
		struct stat fst;

		CHECK_FOR_INTERRUPTS();

		if (strcmp(direntry->d_name, ".") == 0 ||
			strcmp(direntry->d_name, "..") == 0)
			continue;

		snprintf(pathname, MAXPGPATH, "%s/%s", tblspcPath, direntry->d_name);

		if (stat(pathname, &fst) < 0)
		{
			if (errno == ENOENT)
				continue;
			else
				ereport(ERROR,
						(errcode_for_file_access(),
						 errmsg("could not stat file \"%s\": %m", pathname)));
		}

		if (S_ISDIR(fst.st_mode))
			totalsize += db_dir_size(pathname);

		totalsize += fst.st_size;
	}

	FreeDir(dirdesc);

	return totalsize;
}
开发者ID:rtzassociates,项目名称:postgresql-8.2.23,代码行数:59,代码来源:dbsize.c


示例9: CopyTaskFilesFromDirectory

/*
 * CopyTaskFilesFromDirectory finds all files in the given directory, except for
 * those having an attempt suffix. The function then copies these files into the
 * database table identified by the given schema and table name.
 */
static void
CopyTaskFilesFromDirectory(StringInfo schemaName, StringInfo relationName,
						   StringInfo sourceDirectoryName)
{
	const char *directoryName = sourceDirectoryName->data;
	struct dirent *directoryEntry = NULL;
	uint64 copiedRowTotal = 0;

	DIR *directory = AllocateDir(directoryName);
	if (directory == NULL)
	{
		ereport(ERROR, (errcode_for_file_access(),
						errmsg("could not open directory \"%s\": %m", directoryName)));
	}

	directoryEntry = ReadDir(directory, directoryName);
	for (; directoryEntry != NULL; directoryEntry = ReadDir(directory, directoryName))
	{
		const char *baseFilename = directoryEntry->d_name;
		const char *queryString = NULL;
		StringInfo fullFilename = NULL;
		RangeVar *relation = NULL;
		CopyStmt *copyStatement = NULL;
		uint64 copiedRowCount = 0;

		/* if system file or lingering task file, skip it */
		if (strncmp(baseFilename, ".", MAXPGPATH) == 0 ||
			strncmp(baseFilename, "..", MAXPGPATH) == 0 ||
			strstr(baseFilename, ATTEMPT_FILE_SUFFIX) != NULL)
		{
			continue;
		}

		fullFilename = makeStringInfo();
		appendStringInfo(fullFilename, "%s/%s", directoryName, baseFilename);

		/* build relation object and copy statement */
		relation = makeRangeVar(schemaName->data, relationName->data, -1);
		copyStatement = CopyStatement(relation, fullFilename->data);
		if (BinaryWorkerCopyFormat)
		{
			DefElem *copyOption = makeDefElem("format", (Node *) makeString("binary"));
			copyStatement->options = list_make1(copyOption);
		}

		DoCopy(copyStatement, queryString, &copiedRowCount);
		copiedRowTotal += copiedRowCount;
		CommandCounterIncrement();
	}

	ereport(DEBUG2, (errmsg("copied " UINT64_FORMAT " rows into table: \"%s.%s\"",
							copiedRowTotal, schemaName->data, relationName->data)));

	FreeDir(directory);
}
开发者ID:AlexaPopov,项目名称:citus,代码行数:60,代码来源:worker_merge_protocol.c


示例10: directory_is_empty

/*
 * Check if a directory is empty.
 *
 * This probably belongs somewhere else, but not sure where...
 */
bool
directory_is_empty(const char *path)
{
	DIR		   *dirdesc;
	struct dirent *de;

	dirdesc = AllocateDir(path);

	while ((de = ReadDir(dirdesc, path)) != NULL)
	{
		if (strcmp(de->d_name, ".") == 0 ||
			strcmp(de->d_name, "..") == 0)
			continue;
		FreeDir(dirdesc);
		return false;
	}

	FreeDir(dirdesc);
	return true;
}
开发者ID:HyukjinKwon,项目名称:pipelinedb,代码行数:25,代码来源:tablespace.c


示例11: pgarch_readyXlog

/*
 * pgarch_readyXlog
 *
 * Return name of the oldest xlog file that has not yet been archived.
 * No notification is set that file archiving is now in progress, so
 * this would need to be extended if multiple concurrent archival
 * tasks were created. If a failure occurs, we will completely
 * re-copy the file at the next available opportunity.
 *
 * It is important that we return the oldest, so that we archive xlogs
 * in order that they were written, for two reasons:
 * 1) to maintain the sequential chain of xlogs required for recovery
 * 2) because the oldest ones will sooner become candidates for
 * recycling at time of checkpoint
 *
 * NOTE: the "oldest" comparison will presently consider all segments of
 * a timeline with a smaller ID to be older than all segments of a timeline
 * with a larger ID; the net result being that past timelines are given
 * higher priority for archiving.  This seems okay, or at least not
 * obviously worth changing.
 */
static bool
pgarch_readyXlog(char *xlog)
{
	/*
	 * open xlog status directory and read through list of xlogs that have the
	 * .ready suffix, looking for earliest file. It is possible to optimise
	 * this code, though only a single file is expected on the vast majority
	 * of calls, so....
	 */
	char		XLogArchiveStatusDir[MAXPGPATH];
	char		newxlog[MAX_XFN_CHARS + 6 + 1];
	DIR		   *rldir;
	struct dirent *rlde;
	bool		found = false;

	snprintf(XLogArchiveStatusDir, MAXPGPATH, XLOGDIR "/archive_status");
	rldir = AllocateDir(XLogArchiveStatusDir);
	if (rldir == NULL)
		ereport(ERROR,
				(errcode_for_file_access(),
				 errmsg("could not open archive status directory \"%s\": %m",
						XLogArchiveStatusDir)));

	while ((rlde = ReadDir(rldir, XLogArchiveStatusDir)) != NULL)
	{
		int			basenamelen = (int) strlen(rlde->d_name) - 6;

		if (basenamelen >= MIN_XFN_CHARS &&
			basenamelen <= MAX_XFN_CHARS &&
			strspn(rlde->d_name, VALID_XFN_CHARS) >= basenamelen &&
			strcmp(rlde->d_name + basenamelen, ".ready") == 0)
		{
			if (!found)
			{
				strcpy(newxlog, rlde->d_name);
				found = true;
			}
			else
			{
				if (strcmp(rlde->d_name, newxlog) < 0)
					strcpy(newxlog, rlde->d_name);
			}
		}
	}
	FreeDir(rldir);

	if (found)
	{
		/* truncate off the .ready */
		newxlog[strlen(newxlog) - 6] = '\0';
		strcpy(xlog, newxlog);
	}
	return found;
}
开发者ID:phpadmin,项目名称:postgres,代码行数:75,代码来源:pgarch.c


示例12: ResetUnloggedRelations

/*
 * Reset unlogged relations from before the last restart.
 *
 * If op includes UNLOGGED_RELATION_CLEANUP, we remove all forks of any
 * relation with an "init" fork, except for the "init" fork itself.
 *
 * If op includes UNLOGGED_RELATION_INIT, we copy the "init" fork to the main
 * fork.
 */
void
ResetUnloggedRelations(int op)
{
	char		temp_path[MAXPGPATH];
	DIR		   *spc_dir;
	struct dirent *spc_de;
	MemoryContext tmpctx,
				oldctx;

	/* Log it. */
	elog(DEBUG1, "resetting unlogged relations: cleanup %d init %d",
		 (op & UNLOGGED_RELATION_CLEANUP) != 0,
		 (op & UNLOGGED_RELATION_INIT) != 0);

	/*
	 * Just to be sure we don't leak any memory, let's create a temporary
	 * memory context for this operation.
	 */
	tmpctx = AllocSetContextCreate(CurrentMemoryContext,
								   "ResetUnloggedRelations",
								   ALLOCSET_DEFAULT_MINSIZE,
								   ALLOCSET_DEFAULT_INITSIZE,
								   ALLOCSET_DEFAULT_MAXSIZE);
	oldctx = MemoryContextSwitchTo(tmpctx);

	/*
	 * First process unlogged files in pg_default ($PGDATA/base)
	 */
	ResetUnloggedRelationsInTablespaceDir("base", op);

	/*
	 * Cycle through directories for all non-default tablespaces.
	 */
	spc_dir = AllocateDir("pg_tblspc");

	while ((spc_de = ReadDir(spc_dir, "pg_tblspc")) != NULL)
	{
		if (strcmp(spc_de->d_name, ".") == 0 ||
			strcmp(spc_de->d_name, "..") == 0)
			continue;

		snprintf(temp_path, sizeof(temp_path), "pg_tblspc/%s/%s",
				 spc_de->d_name, TABLESPACE_VERSION_DIRECTORY);
		ResetUnloggedRelationsInTablespaceDir(temp_path, op);
	}

	FreeDir(spc_dir);

	/*
	 * Restore memory context.
	 */
	MemoryContextSwitchTo(oldctx);
	MemoryContextDelete(tmpctx);
}
开发者ID:AllenDou,项目名称:postgresql,代码行数:63,代码来源:reinit.c


示例13: calculate_database_size

/*
 * calculate size of database in all tablespaces
 */
static int64
calculate_database_size(Oid dbOid)
{
	int64		totalsize;
	DIR		   *dirdesc;
	struct dirent *direntry;
	char		dirpath[MAXPGPATH];
	char		pathname[MAXPGPATH];
	AclResult	aclresult;

	/* User must have connect privilege for target database */
	aclresult = pg_database_aclcheck(dbOid, GetUserId(), ACL_CONNECT);
	if (aclresult != ACLCHECK_OK)
		aclcheck_error(aclresult, ACL_KIND_DATABASE,
					   get_database_name(dbOid));

	/* Shared storage in pg_global is not counted */

	/* Include pg_default storage */
	snprintf(pathname, MAXPGPATH, "base/%u", dbOid);
	totalsize = db_dir_size(pathname);

	/* Scan the non-default tablespaces */
	snprintf(dirpath, MAXPGPATH, "pg_tblspc");
	dirdesc = AllocateDir(dirpath);
	if (!dirdesc)
		ereport(ERROR,
				(errcode_for_file_access(),
				 errmsg("could not open tablespace directory \"%s\": %m",
						dirpath)));

	while ((direntry = ReadDir(dirdesc, dirpath)) != NULL)
	{
		CHECK_FOR_INTERRUPTS();

		if (strcmp(direntry->d_name, ".") == 0 ||
			strcmp(direntry->d_name, "..") == 0)
			continue;

		snprintf(pathname, MAXPGPATH, "pg_tblspc/%s/%s/%u",
				 direntry->d_name, TABLESPACE_VERSION_DIRECTORY, dbOid);
		totalsize += db_dir_size(pathname);
	}

	FreeDir(dirdesc);

	/* Complain if we found no trace of the DB at all */
	if (!totalsize)
		ereport(ERROR,
				(ERRCODE_UNDEFINED_DATABASE,
				 errmsg("database with OID %u does not exist", dbOid)));

	return totalsize;
}
开发者ID:markwkm,项目名称:postgres,代码行数:57,代码来源:dbsize.c


示例14: copydir

/*
 * copydir: copy a directory (we only need to go one level deep)
 *
 * Return 0 on success, nonzero on failure.
 *
 * NB: do not elog(ERROR) on failure.  Return to caller so it can try to
 * clean up.
 */
int
copydir(char *fromdir, char *todir)
{
	DIR		   *xldir;
	struct dirent *xlde;
	char		fromfl[MAXPGPATH];
	char		tofl[MAXPGPATH];

	if (mkdir(todir) != 0)
	{
		ereport(WARNING,
				(errcode_for_file_access(),
				 errmsg("could not create directory \"%s\": %m", todir)));
		return -1;
	}
	xldir = AllocateDir(fromdir);
	if (xldir == NULL)
	{
		ereport(WARNING,
				(errcode_for_file_access(),
				 errmsg("could not open directory \"%s\": %m", fromdir)));
		return -1;
	}

	while ((xlde = readdir(xldir)) != NULL)
	{
		snprintf(fromfl, MAXPGPATH, "%s/%s", fromdir, xlde->d_name);
		snprintf(tofl, MAXPGPATH, "%s/%s", todir, xlde->d_name);
		if (CopyFile(fromfl, tofl, TRUE) < 0)
		{
			ereport(WARNING,
					(errcode_for_file_access(),
					 errmsg("could not copy file \"%s\": %m", fromfl)));
			FreeDir(xldir);
			return -1;
		}
	}

	FreeDir(xldir);
	return 0;
}
开发者ID:sunyangkobe,项目名称:cscd43,代码行数:49,代码来源:copydir.c


示例15: StartupReplicationSlots

/*
 * Load all replication slots from disk into memory at server startup. This
 * needs to be run before we start crash recovery.
 */
void
StartupReplicationSlots(XLogRecPtr checkPointRedo)
{
	DIR		   *replication_dir;
	struct dirent *replication_de;

	ereport(DEBUG1,
			(errmsg("starting up replication slots")));

	/* restore all slots by iterating over all on-disk entries */
	replication_dir = AllocateDir("pg_replslot");
	while ((replication_de = ReadDir(replication_dir, "pg_replslot")) != NULL)
	{
		struct stat	statbuf;
		char		path[MAXPGPATH];

		if (strcmp(replication_de->d_name, ".") == 0 ||
			strcmp(replication_de->d_name, "..") == 0)
			continue;

		snprintf(path, MAXPGPATH, "pg_replslot/%s", replication_de->d_name);

		/* we're only creating directories here, skip if it's not our's */
		if (lstat(path, &statbuf) == 0 && !S_ISDIR(statbuf.st_mode))
			continue;

		/* we crashed while a slot was being setup or deleted, clean up */
		if (string_endswith(replication_de->d_name, ".tmp"))
		{
			if (!rmtree(path, true))
			{
				ereport(WARNING,
						(errcode_for_file_access(),
						 errmsg("could not remove directory \"%s\"", path)));
				continue;
			}
			fsync_fname("pg_replslot", true);
			continue;
		}

		/* looks like a slot in a normal state, restore */
		RestoreSlotFromDisk(replication_de->d_name);
	}
	FreeDir(replication_dir);

	/* currently no slots exist, we're done. */
	if (max_replication_slots <= 0)
		return;

	/* Now that we have recovered all the data, compute replication xmin */
	ReplicationSlotsComputeRequiredXmin();
	ReplicationSlotsComputeRequiredLSN();
}
开发者ID:AlexHill,项目名称:postgres,代码行数:57,代码来源:slot.c


示例16: pg_start_backup

/*
 * pg_start_backup: set up for taking an on-line backup dump
 *
 * Essentially what this does is to create a backup label file in $PGDATA,
 * where it will be archived as part of the backup dump.  The label file
 * contains the user-supplied label string (typically this would be used
 * to tell where the backup dump will be stored) and the starting time and
 * starting WAL location for the dump.
 *
 * Permission checking for this function is managed through the normal
 * GRANT system.
 */
Datum
pg_start_backup(PG_FUNCTION_ARGS)
{
	text	   *backupid = PG_GETARG_TEXT_P(0);
	bool		fast = PG_GETARG_BOOL(1);
	bool		exclusive = PG_GETARG_BOOL(2);
	char	   *backupidstr;
	XLogRecPtr	startpoint;
	DIR		   *dir;

	backupidstr = text_to_cstring(backupid);

	if (exclusive_backup_running || nonexclusive_backup_running)
		ereport(ERROR,
				(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
				 errmsg("a backup is already in progress in this session")));

	/* Make sure we can open the directory with tablespaces in it */
	dir = AllocateDir("pg_tblspc");
	if (!dir)
		ereport(ERROR,
				(errmsg("could not open directory \"%s\": %m", "pg_tblspc")));

	if (exclusive)
	{
		startpoint = do_pg_start_backup(backupidstr, fast, NULL, NULL,
										dir, NULL, NULL, false, true);
		exclusive_backup_running = true;
	}
	else
	{
		MemoryContext oldcontext;

		/*
		 * Label file and tablespace map file need to be long-lived, since they
		 * are read in pg_stop_backup.
		 */
		oldcontext = MemoryContextSwitchTo(TopMemoryContext);
		label_file = makeStringInfo();
		tblspc_map_file = makeStringInfo();
		MemoryContextSwitchTo(oldcontext);

		startpoint = do_pg_start_backup(backupidstr, fast, NULL, label_file,
										dir, NULL, tblspc_map_file, false, true);
		nonexclusive_backup_running = true;

		before_shmem_exit(nonexclusive_base_backup_cleanup, (Datum) 0);
	}

	FreeDir(dir);

	PG_RETURN_LSN(startpoint);
}
开发者ID:Gordiychuk,项目名称:postgres,代码行数:65,代码来源:xlogfuncs.c


示例17: directory_is_empty

/*
 * Check if a directory is empty.
 *
 * This probably belongs somewhere else, but not sure where...
 */
bool
directory_is_empty(const char *path)
{
	DIR		   *dirdesc;
	struct dirent *de;

	dirdesc = AllocateDir(path);

	while ((de = ReadDir(dirdesc, path)) != NULL)
	{
		if (strcmp(de->d_name, ".") == 0 ||
			strcmp(de->d_name, "..") == 0)
			continue;
		/* Odd... On snow leopard, we get back "/" as a subdir, which is wrong. Ingore it */
		if (de->d_name[0] == '/' && de->d_name[1] == '\0')
			continue;
		FreeDir(dirdesc);
		return false;
	}

	FreeDir(dirdesc);
	return true;
}
开发者ID:Mrfuture1,项目名称:gpdb,代码行数:28,代码来源:tablespace.c


示例18: SlruRecoverMirrorDir

static int
SlruRecoverMirrorDir(char *slru_dir)
{
	DIR				*cldir;
	struct dirent	*clde;
	int				retval = 0;
	
	char		*dir = NULL;
	char		*mirrorDir = NULL;

	int 		counter = 0;

	if (isTxnDir(slru_dir))
        {
                dir = makeRelativeToTxnFilespace(slru_dir);
                mirrorDir = makeRelativeToPeerTxnFilespace(slru_dir);
        }
        else
        {
                dir = (char*)palloc(MAXPGPATH);
                strncpy(dir, slru_dir, MAXPGPATH);
                mirrorDir = (char*)palloc(MAXPGPATH);
                strncpy(mirrorDir, slru_dir, MAXPGPATH);
        }
	
	cldir = AllocateDir(dir);
	while ((clde = ReadDir(cldir, dir)) != NULL) {
		if (strlen(clde->d_name) == 4 &&
			strspn(clde->d_name, "0123456789ABCDEF") == 4) {
			
			retval = MirrorFlatFile(slru_dir, clde->d_name);
			
			if (retval != 0)
				break;
			
		}
		counter++;

		if (counter % log_count_recovered_files_batch == 0)
		{
			elog(LOG, "completed recovering %d files", counter);
		}
	}
	elog(LOG, "completed recovering %d files", counter);
	FreeDir(cldir);

	pfree(dir);
	pfree(mirrorDir);	
	return retval;
}
开发者ID:AnLingm,项目名称:gpdb,代码行数:50,代码来源:slru.c


示例19: copydir

/*
 * copydir: copy a directory
 *
 * If recurse is false, subdirectories are ignored.  Anything that's not
 * a directory or a regular file is ignored.
 */
void
copydir(char *fromdir, char *todir, bool recurse)
{
	DIR		   *xldir;
	struct dirent *xlde;
	char		fromfile[MAXPGPATH];
	char		tofile[MAXPGPATH];

	if (mkdir(todir, S_IRUSR | S_IWUSR | S_IXUSR) != 0)
		ereport(ERROR,
				(errcode_for_file_access(),
				 errmsg("could not create directory \"%s\": %m", todir)));

	xldir = AllocateDir(fromdir);
	if (xldir == NULL)
		ereport(ERROR,
				(errcode_for_file_access(),
				 errmsg("could not open directory \"%s\": %m", fromdir)));

	while ((xlde = ReadDir(xldir, fromdir)) != NULL)
	{
		struct stat fst;

        /* If we got a cancel signal during the copy of the directory, quit */
        CHECK_FOR_INTERRUPTS();

		if (strcmp(xlde->d_name, ".") == 0 ||
			strcmp(xlde->d_name, "..") == 0)
			continue;

		snprintf(fromfile, MAXPGPATH, "%s/%s", fromdir, xlde->d_name);
		snprintf(tofile, MAXPGPATH, "%s/%s", todir, xlde->d_name);

		if (lstat(fromfile, &fst) < 0)
			ereport(ERROR,
					(errcode_for_file_access(),
					 errmsg("could not stat file \"%s\": %m", fromfile)));

		if (S_ISDIR(fst.st_mode))
		{
			/* recurse to handle subdirectories */
			if (recurse)
				copydir(fromfile, tofile, true);
		}
		else if (S_ISREG(fst.st_mode))
			copy_file(fromfile, tofile);
	}

	FreeDir(xldir);
}
开发者ID:ystk,项目名称:debian-postgresql-8.4,代码行数:56,代码来源:copydir.c


示例20: pg_tablespace_size

/*
 * calculate total size of tablespace
 */
Datum
pg_tablespace_size(PG_FUNCTION_ARGS)
{
    Oid tblspcOid = PG_GETARG_OID(0);
	char tblspcPath[MAXPGPATH];
	char pathname[MAXPGPATH];
	int64		totalsize=0;
	DIR         *dirdesc;
    struct dirent *direntry;

	if (tblspcOid == DEFAULTTABLESPACE_OID)
	    snprintf(tblspcPath, MAXPGPATH, "%s/base", DataDir);
	else if (tblspcOid == GLOBALTABLESPACE_OID)
	    snprintf(tblspcPath, MAXPGPATH, "%s/global", DataDir);
	else
		snprintf(tblspcPath, MAXPGPATH, "%s/pg_tblspc/%u", DataDir, tblspcOid);

	dirdesc = AllocateDir(tblspcPath);

	if (!dirdesc)
		ereport(ERROR,
				(errcode_for_file_access(),
				 errmsg("could not open tablespace directory \"%s\": %m",
						tblspcPath)));

	while ((direntry = readdir(dirdesc)) != NULL)
	{
	    struct stat fst;

	    if (strcmp(direntry->d_name, ".") == 0 ||
			strcmp(direntry->d_name, "..") == 0)
		    continue;

		snprintf(pathname, MAXPGPATH, "%s/%s", tblspcPath, direntry->d_name);

		if (stat(pathname, &fst) < 0)
			ereport(ERROR,
					(errcode_for_file_access(),
					 errmsg("could not stat \"%s\": %m", pathname)));
		totalsize += fst.st_size;

		if (fst.st_mode & S_IFDIR)
		    totalsize += db_dir_size(pathname);
	}

	FreeDir(dirdesc);

	PG_RETURN_INT64(totalsize);
}
开发者ID:berkeley-cs186,项目名称:course-fa07,代码行数:52,代码来源:dbsize.c



注:本文中的FreeDir函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ FreeFile函数代码示例发布时间:2022-05-30
下一篇:
C++ FreeData函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap