本文整理汇总了C++中GET_DEV函数的典型用法代码示例。如果您正苦于以下问题：C++ GET_DEV函数的具体用法？C++ GET_DEV怎么用？C++ GET_DEV使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了GET_DEV函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: adf_ae_init
int adf_ae_init(struct adf_accel_dev *accel_dev)
{
struct adf_fw_loader_data *loader_data;
struct adf_hw_device_data *hw_device = accel_dev->hw_device;
if (!hw_device->fw_name)
return 0;
loader_data = kzalloc(sizeof(*loader_data), GFP_KERNEL);
if (!loader_data)
return -ENOMEM;
accel_dev->fw_loader = loader_data;
if (qat_hal_init(accel_dev)) {
dev_err(&GET_DEV(accel_dev), "Failed to init the AEs\n");
kfree(loader_data);
return -EFAULT;
}
if (adf_ae_reset(accel_dev, 0)) {
dev_err(&GET_DEV(accel_dev), "Failed to reset the AEs\n");
qat_hal_deinit(loader_data->fw_loader);
kfree(loader_data);
return -EFAULT;
}
return 0;
}
开发者ID:caseyparker，项目名称:linux，代码行数:26，代码来源:adf_accel_engine.c
示例2: adf_init_admin_comms
int adf_init_admin_comms(struct adf_accel_dev *accel_dev)
{
struct adf_admin_comms *admin;
struct adf_bar *pmisc = &GET_BARS(accel_dev)[ADF_DH895XCC_PMISC_BAR];
void __iomem *csr = pmisc->virt_addr;
void __iomem *mailbox = csr + ADF_DH895XCC_MAILBOX_BASE_OFFSET;
uint64_t reg_val;
admin = kzalloc_node(sizeof(*accel_dev->admin), GFP_KERNEL,
dev_to_node(&GET_DEV(accel_dev)));
if (!admin)
return -ENOMEM;
admin->virt_addr = dma_zalloc_coherent(&GET_DEV(accel_dev), PAGE_SIZE,
&admin->phy_addr, GFP_KERNEL);
if (!admin->virt_addr) {
dev_err(&GET_DEV(accel_dev), "Failed to allocate dma buff\n");
kfree(admin);
return -ENOMEM;
}
reg_val = (uint64_t)admin->phy_addr;
ADF_CSR_WR(csr, ADF_DH895XCC_ADMINMSGUR_OFFSET, reg_val >> 32);
ADF_CSR_WR(csr, ADF_DH895XCC_ADMINMSGLR_OFFSET, reg_val);
mutex_init(&admin->lock);
admin->mailbox_addr = mailbox;
accel_dev->admin = admin;
return 0;
}
开发者ID:0x000000FF，项目名称:edison-linux，代码行数:27，代码来源:adf_admin.c
示例3: adf_add_key_value_data
static int adf_add_key_value_data(struct adf_accel_dev *accel_dev,
const char *section,
const struct adf_user_cfg_key_val *key_val)
{
if (key_val->type == ADF_HEX) {
long *ptr = (long *)key_val->val;
long val = *ptr;
if (adf_cfg_add_key_value_param(accel_dev, section,
key_val->key, (void *)val,
key_val->type)) {
dev_err(&GET_DEV(accel_dev),
"failed to add hex keyvalue.\n");
return -EFAULT;
}
} else {
if (adf_cfg_add_key_value_param(accel_dev, section,
key_val->key, key_val->val,
key_val->type)) {
dev_err(&GET_DEV(accel_dev),
"failed to add keyvalue.\n");
return -EFAULT;
}
}
return 0;
}
开发者ID:davyb1964，项目名称:rxe-dev，代码行数:26，代码来源:adf_ctl_drv.c
示例4: adf_ae_fw_load
int adf_ae_fw_load(struct adf_accel_dev *accel_dev)
{
struct adf_fw_loader_data *loader_data = accel_dev->fw_loader;
struct adf_hw_device_data *hw_device = accel_dev->hw_device;
void *uof_addr;
uint32_t uof_size;
if (request_firmware(&loader_data->uof_fw, hw_device->fw_name,
&accel_dev->accel_pci_dev.pci_dev->dev)) {
dev_err(&GET_DEV(accel_dev), "Failed to load firmware %s\n",
hw_device->fw_name);
return -EFAULT;
}
uof_size = loader_data->uof_fw->size;
uof_addr = (void *)loader_data->uof_fw->data;
if (qat_uclo_map_uof_obj(loader_data->fw_loader, uof_addr, uof_size)) {
dev_err(&GET_DEV(accel_dev), "Failed to map UOF\n");
goto out_err;
}
if (qat_uclo_wr_all_uimage(loader_data->fw_loader)) {
dev_err(&GET_DEV(accel_dev), "Failed to map UOF\n");
goto out_err;
}
return 0;
out_err:
adf_ae_fw_release(accel_dev);
return -EFAULT;
}
开发者ID:JcShang，项目名称:linux-80211n-csitool，代码行数:30，代码来源:adf_accel_engine.c
示例5: qat_alg_sgl_to_bufl
static int qat_alg_sgl_to_bufl(struct qat_crypto_instance *inst,
struct scatterlist *assoc,
struct scatterlist *sgl,
struct scatterlist *sglout, uint8_t *iv,
uint8_t ivlen,
struct qat_crypto_request *qat_req)
{
struct device *dev = &GET_DEV(inst->accel_dev);
int i, bufs = 0, n = sg_nents(sgl), assoc_n = sg_nents(assoc);
struct qat_alg_buf_list *bufl;
struct qat_alg_buf_list *buflout = NULL;
dma_addr_t blp;
dma_addr_t bloutp = 0;
struct scatterlist *sg;
size_t sz = sizeof(struct qat_alg_buf_list) +
((1 + n + assoc_n) * sizeof(struct qat_alg_buf));
if (unlikely(!n))
return -EINVAL;
bufl = kmalloc_node(sz, GFP_ATOMIC,
dev_to_node(&GET_DEV(inst->accel_dev)));
if (unlikely(!bufl))
return -ENOMEM;
blp = dma_map_single(dev, bufl, sz, DMA_TO_DEVICE);
if (unlikely(dma_mapping_error(dev, blp)))
goto err;
for_each_sg(assoc, sg, assoc_n, i) {
if (!sg->length)
continue;
bufl->bufers[bufs].addr = dma_map_single(dev,
sg_virt(sg),
sg->length,
DMA_BIDIRECTIONAL);
bufl->bufers[bufs].len = sg->length;
if (unlikely(dma_mapping_error(dev, bufl->bufers[bufs].addr)))
goto err;
bufs++;
}
bufl->bufers[bufs].addr = dma_map_single(dev, iv, ivlen,
DMA_BIDIRECTIONAL);
bufl->bufers[bufs].len = ivlen;
if (unlikely(dma_mapping_error(dev, bufl->bufers[bufs].addr)))
goto err;
bufs++;
for_each_sg(sgl, sg, n, i) {
int y = i + bufs;
bufl->bufers[y].addr = dma_map_single(dev, sg_virt(sg),
sg->length,
DMA_BIDIRECTIONAL);
bufl->bufers[y].len = sg->length;
if (unlikely(dma_mapping_error(dev, bufl->bufers[y].addr)))
goto err;
}
开发者ID:volk3，项目名称:CS736，代码行数:58，代码来源:qat_algs.c
示例6: qat_rsa_set_n
int qat_rsa_set_n(struct qat_rsa_ctx *ctx, const char *value, size_t vlen)
{
struct qat_crypto_instance *inst = ctx->inst;
struct device *dev = &GET_DEV(inst->accel_dev);
const char *ptr = value;
int ret;
while (!*ptr && vlen) {
ptr++;
vlen--;
}
ctx->key_sz = vlen;
ret = -EINVAL;
/* invalid key size provided */
if (!qat_rsa_enc_fn_id(ctx->key_sz))
goto err;
ret = -ENOMEM;
ctx->n = dma_zalloc_coherent(dev, ctx->key_sz, &ctx->dma_n, GFP_KERNEL);
if (!ctx->n)
goto err;
memcpy(ctx->n, ptr, ctx->key_sz);
return 0;
err:
ctx->key_sz = 0;
ctx->n = NULL;
return ret;
}
开发者ID:01org，项目名称:thunderbolt-software-kernel-tree，代码行数:30，代码来源:qat_asym_algs.c
示例7: qat_dh_set_secret
static int qat_dh_set_secret(struct crypto_kpp *tfm, const void *buf,
unsigned int len)
{
struct qat_dh_ctx *ctx = kpp_tfm_ctx(tfm);
struct device *dev = &GET_DEV(ctx->inst->accel_dev);
struct dh params;
int ret;
if (crypto_dh_decode_key(buf, len, ¶ms) < 0)
return -EINVAL;
/* Free old secret if any */
qat_dh_clear_ctx(dev, ctx);
ret = qat_dh_set_params(ctx, ¶ms);
if (ret < 0)
return ret;
ctx->xa = dma_zalloc_coherent(dev, ctx->p_size, &ctx->dma_xa,
GFP_KERNEL);
if (!ctx->xa) {
qat_dh_clear_ctx(dev, ctx);
return -ENOMEM;
}
memcpy(ctx->xa + (ctx->p_size - params.key_size), params.key,
params.key_size);
return 0;
}
开发者ID:01org，项目名称:thunderbolt-software-kernel-tree，代码行数:29，代码来源:qat_asym_algs.c
示例8: qat_alg_free_bufl
static void qat_alg_free_bufl(struct qat_crypto_instance *inst,
struct qat_crypto_request *qat_req)
{
struct device *dev = &GET_DEV(inst->accel_dev);
struct qat_alg_buf_list *bl = qat_req->buf.bl;
struct qat_alg_buf_list *blout = qat_req->buf.blout;
dma_addr_t blp = qat_req->buf.blp;
dma_addr_t blpout = qat_req->buf.bloutp;
size_t sz = qat_req->buf.sz;
size_t sz_out = qat_req->buf.sz_out;
int i;
for (i = 0; i < bl->num_bufs; i++)
dma_unmap_single(dev, bl->bufers[i].addr,
bl->bufers[i].len, DMA_BIDIRECTIONAL);
dma_unmap_single(dev, blp, sz, DMA_TO_DEVICE);
kfree(bl);
if (blp != blpout) {
/* If out of place operation dma unmap only data */
int bufless = blout->num_bufs - blout->num_mapped_bufs;
for (i = bufless; i < blout->num_bufs; i++) {
dma_unmap_single(dev, blout->bufers[i].addr,
blout->bufers[i].len,
DMA_BIDIRECTIONAL);
}
dma_unmap_single(dev, blpout, sz_out, DMA_TO_DEVICE);
kfree(blout);
}
}
开发者ID:AlexShiLucky，项目名称:linux，代码行数:31，代码来源:qat_algs.c
示例9: qat_rsa_set_d
int qat_rsa_set_d(struct qat_rsa_ctx *ctx, const char *value, size_t vlen)
{
struct qat_crypto_instance *inst = ctx->inst;
struct device *dev = &GET_DEV(inst->accel_dev);
const char *ptr = value;
int ret;
while (!*ptr && vlen) {
ptr++;
vlen--;
}
ret = -EINVAL;
if (!ctx->key_sz || !vlen || vlen > ctx->key_sz)
goto err;
ret = -ENOMEM;
ctx->d = dma_zalloc_coherent(dev, ctx->key_sz, &ctx->dma_d, GFP_KERNEL);
if (!ctx->d)
goto err;
memcpy(ctx->d + (ctx->key_sz - vlen), ptr, vlen);
return 0;
err:
ctx->d = NULL;
return ret;
}
开发者ID:01org，项目名称:thunderbolt-software-kernel-tree，代码行数:27，代码来源:qat_asym_algs.c
示例10: adf_device_reset_worker
static void adf_device_reset_worker(struct work_struct *work)
{
struct adf_reset_dev_data *reset_data =
container_of(work, struct adf_reset_dev_data, reset_work);
struct adf_accel_dev *accel_dev = reset_data->accel_dev;
adf_dev_restarting_notify(accel_dev);
adf_dev_stop(accel_dev);
adf_dev_restore(accel_dev);
if (adf_dev_start(accel_dev)) {
/* The device hanged and we can't restart it so stop here */
dev_err(&GET_DEV(accel_dev), "Restart device failed\n");
kfree(reset_data);
WARN(1, "QAT: device restart failed. Device is unusable\n");
return;
}
adf_dev_restarted_notify(accel_dev);
clear_bit(ADF_STATUS_RESTARTING, &accel_dev->status);
/* The dev is back alive. Notify the caller if in sync mode */
if (reset_data->mode == ADF_DEV_RESET_SYNC)
complete(&reset_data->compl);
else
kfree(reset_data);
}
开发者ID:383530895，项目名称:linux，代码行数:25，代码来源:adf_aer.c
示例11: qat_rsa_get_d
int qat_rsa_get_d(void *context, size_t hdrlen, unsigned char tag,
const void *value, size_t vlen)
{
struct qat_rsa_ctx *ctx = context;
struct qat_crypto_instance *inst = ctx->inst;
struct device *dev = &GET_DEV(inst->accel_dev);
const char *ptr = value;
int ret;
while (!*ptr && vlen) {
ptr++;
vlen--;
}
ret = -EINVAL;
if (!ctx->key_sz || !vlen || vlen > ctx->key_sz)
goto err;
/* In FIPS mode only allow key size 2K & 3K */
if (fips_enabled && (vlen != 256 && vlen != 384)) {
pr_err("QAT: RSA: key size not allowed in FIPS mode\n");
goto err;
}
ret = -ENOMEM;
ctx->d = dma_zalloc_coherent(dev, ctx->key_sz, &ctx->dma_d, GFP_KERNEL);
if (!ctx->n)
goto err;
memcpy(ctx->d + (ctx->key_sz - vlen), ptr, vlen);
return 0;
err:
ctx->d = NULL;
return ret;
}
开发者ID:DenisLug，项目名称:mptcp，代码行数:35，代码来源:qat_asym_algs.c
示例12: QUERY
static QUERY(sniff_status_show) {
char *uid = *(va_arg(ap, char **));
session_t *s = session_find(uid);
struct pcap_stat stats;
if (!s)
return -1;
if (!s->connected)
return 0;
if (!s->priv) {
debug_error("sniff_status_show() s->priv NULL\n");
return -1;
}
/* Device: DEVICE (PROMISC?) */
/* some stats */
memset(&stats, 0, sizeof(struct pcap_stat));
if (pcap_stats(GET_DEV(s), &stats) == -1) {
debug_error("sniff_status_show() pcap_stats() failed\n");
return -1;
}
debug("pcap_stats() recv: %d drop: %d ifdrop: %d\n", stats.ps_recv, stats.ps_drop, stats.ps_ifdrop);
print("sniff_pkt_rcv", session_name(s), ekg_itoa(stats.ps_recv));
print("sniff_pkt_drop", session_name(s), ekg_itoa(stats.ps_drop));
print("sniff_conn_db", session_name(s), ekg_itoa(list_count(tcp_connections)));
return 0;
}
开发者ID:11mariom，项目名称:ekg2，代码行数:32，代码来源:sniff.c
示例13: qat_rsa_get_e
int qat_rsa_get_e(void *context, size_t hdrlen, unsigned char tag,
const void *value, size_t vlen)
{
struct qat_rsa_ctx *ctx = context;
struct qat_crypto_instance *inst = ctx->inst;
struct device *dev = &GET_DEV(inst->accel_dev);
const char *ptr = value;
while (!*ptr && vlen) {
ptr++;
vlen--;
}
if (!ctx->key_sz || !vlen || vlen > ctx->key_sz) {
ctx->e = NULL;
return -EINVAL;
}
ctx->e = dma_zalloc_coherent(dev, ctx->key_sz, &ctx->dma_e, GFP_KERNEL);
if (!ctx->e) {
ctx->e = NULL;
return -ENOMEM;
}
memcpy(ctx->e + (ctx->key_sz - vlen), ptr, vlen);
return 0;
}
开发者ID:DenisLug，项目名称:mptcp，代码行数:26，代码来源:qat_asym_algs.c
示例14: qat_dh_set_params
static int qat_dh_set_params(struct qat_dh_ctx *ctx, struct dh *params)
{
struct qat_crypto_instance *inst = ctx->inst;
struct device *dev = &GET_DEV(inst->accel_dev);
if (unlikely(!params->p || !params->g))
return -EINVAL;
if (qat_dh_check_params_length(params->p_size << 3))
return -EINVAL;
ctx->p_size = params->p_size;
ctx->p = dma_zalloc_coherent(dev, ctx->p_size, &ctx->dma_p, GFP_KERNEL);
if (!ctx->p)
return -ENOMEM;
memcpy(ctx->p, params->p, ctx->p_size);
/* If g equals 2 don't copy it */
if (params->g_size == 1 && *(char *)params->g == 0x02) {
ctx->g2 = true;
return 0;
}
ctx->g = dma_zalloc_coherent(dev, ctx->p_size, &ctx->dma_g, GFP_KERNEL);
if (!ctx->g) {
dma_free_coherent(dev, ctx->p_size, ctx->p, ctx->dma_p);
ctx->p = NULL;
return -ENOMEM;
}
memcpy(ctx->g + (ctx->p_size - params->g_size), params->g,
params->g_size);
return 0;
}
开发者ID:01org，项目名称:thunderbolt-software-kernel-tree，代码行数:34，代码来源:qat_asym_algs.c
示例15: adf_isr_alloc_msix_entry_table
static int adf_isr_alloc_msix_entry_table(struct adf_accel_dev *accel_dev)
{
int i;
char **names;
struct msix_entry *entries;
struct adf_hw_device_data *hw_data = accel_dev->hw_device;
uint32_t msix_num_entries = hw_data->num_banks + 1;
entries = kzalloc_node(msix_num_entries * sizeof(*entries),
GFP_KERNEL, dev_to_node(&GET_DEV(accel_dev)));
if (!entries)
return -ENOMEM;
names = kcalloc(msix_num_entries, sizeof(char *), GFP_KERNEL);
if (!names) {
kfree(entries);
return -ENOMEM;
}
for (i = 0; i < msix_num_entries; i++) {
*(names + i) = kzalloc(ADF_MAX_MSIX_VECTOR_NAME, GFP_KERNEL);
if (!(*(names + i)))
goto err;
}
accel_dev->accel_pci_dev.msix_entries.entries = entries;
accel_dev->accel_pci_dev.msix_entries.names = names;
return 0;
err:
for (i = 0; i < msix_num_entries; i++)
kfree(*(names + i));
kfree(entries);
kfree(names);
return -ENOMEM;
}
开发者ID:ravi-vid，项目名称:linux-xlnx，代码行数:33，代码来源:adf_isr.c
示例16: adf_exit_admin_comms
void adf_exit_admin_comms(struct adf_accel_dev *accel_dev)
{
struct adf_admin_comms *admin = accel_dev->admin;
if (!admin)
return;
if (admin->virt_addr)
dma_free_coherent(&GET_DEV(accel_dev), PAGE_SIZE,
admin->virt_addr, admin->phy_addr);
dma_unmap_single(&GET_DEV(accel_dev), admin->const_tbl_addr, 1024,
DMA_TO_DEVICE);
mutex_destroy(&admin->lock);
kfree(admin);
accel_dev->admin = NULL;
}
开发者ID:AntonGitName，项目名称:au-linux-kernel-spring-2016，代码行数:17，代码来源:adf_admin.c
示例17: qat_dh_exit_tfm
static void qat_dh_exit_tfm(struct crypto_kpp *tfm)
{
struct qat_dh_ctx *ctx = kpp_tfm_ctx(tfm);
struct device *dev = &GET_DEV(ctx->inst->accel_dev);
qat_dh_clear_ctx(dev, ctx);
qat_crypto_put_instance(ctx->inst);
}
开发者ID:01org，项目名称:thunderbolt-software-kernel-tree，代码行数:8，代码来源:qat_asym_algs.c
示例18: adf_copy_key_value_data
static int adf_copy_key_value_data(struct adf_accel_dev *accel_dev,
struct adf_user_cfg_ctl_data *ctl_data)
{
struct adf_user_cfg_key_val key_val;
struct adf_user_cfg_key_val *params_head;
struct adf_user_cfg_section section, *section_head;
section_head = ctl_data->config_section;
while (section_head) {
if (copy_from_user(§ion, (void __user *)section_head,
sizeof(*section_head))) {
dev_err(&GET_DEV(accel_dev),
"failed to copy section info\n");
goto out_err;
}
if (adf_cfg_section_add(accel_dev, section.name)) {
dev_err(&GET_DEV(accel_dev),
"failed to add section.\n");
goto out_err;
}
params_head = section_head->params;
while (params_head) {
if (copy_from_user(&key_val, (void __user *)params_head,
sizeof(key_val))) {
dev_err(&GET_DEV(accel_dev),
"Failed to copy keyvalue.\n");
goto out_err;
}
if (adf_add_key_value_data(accel_dev, section.name,
&key_val)) {
goto out_err;
}
params_head = key_val.next;
}
section_head = section.next;
}
return 0;
out_err:
adf_cfg_del_all(accel_dev);
return -EFAULT;
}
开发者ID:davyb1964，项目名称:rxe-dev，代码行数:45，代码来源:adf_ctl_drv.c
示例19: adf_vf2pf_shutdown
static void adf_vf2pf_shutdown(struct adf_accel_dev *accel_dev)
{
u32 msg = (ADF_VF2PF_MSGORIGIN_SYSTEM |
(ADF_VF2PF_MSGTYPE_SHUTDOWN << ADF_VF2PF_MSGTYPE_SHIFT));
if (adf_iov_putmsg(accel_dev, msg, 0))
dev_err(&GET_DEV(accel_dev),
"Failed to send Shutdown event to PF\n");
}
开发者ID:AntonGitName，项目名称:au-linux-kernel-spring-2016，代码行数:9，代码来源:adf_dh895xccvf_hw_data.c
示例20: COMMAND
static COMMAND(sniff_command_disconnect) {
if (!session_connected_get(session)) {
printq("not_connected", session_name(session));
return -1;
}
protocol_disconnected_emit(session, NULL, EKG_DISCONNECT_USER);
if (!GET_DEV(session)) {
debug_error("sniff_command_disconnect() not dev?!\n");
return -1;
}
pcap_close(GET_DEV(session));
session->priv = NULL;
return 0;
}
开发者ID:11mariom，项目名称:ekg2，代码行数:18，代码来源:sniff.c
注：本文中的GET_DEV函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论