C++ GET_GLOBAL函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中GET_GLOBAL函数的典型用法代码示例。如果您正苦于以下问题：C++ GET_GLOBAL函数的具体用法？C++ GET_GLOBAL怎么用？C++ GET_GLOBAL使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了GET_GLOBAL函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: stdvga_find_mode

struct vgamode_s *bochsvga_find_mode(int mode)
{
    struct bochsvga_mode *m = bochsvga_modes;
    if (GET_GLOBAL(dispi_found))
        for (; m < &bochsvga_modes[ARRAY_SIZE(bochsvga_modes)]; m++)
            if (GET_GLOBAL(m->mode) == mode)
                return &m->info;
    return stdvga_find_mode(mode);
}

开发者ID:GrimDerp，项目名称:TriforceAFL，代码行数:9，代码来源:bochsvga.c

示例2: get_translation

static u8
get_translation(struct drive_s *drive_g)
{
    u8 type = GET_GLOBAL(drive_g->type);
    if (! CONFIG_COREBOOT && type == DTYPE_ATA) {
        // Emulators pass in the translation info via nvram.
        u8 ataid = GET_GLOBAL(drive_g->cntl_id);
        u8 channel = ataid / 2;
        u8 translation = inb_cmos(CMOS_BIOS_DISKTRANSFLAG + channel/2);
        translation >>= 2 * (ataid % 4);
        translation &= 0x03;
        return translation;
    }

开发者ID:3a9LL，项目名称:panda，代码行数:13，代码来源:block.c

示例3: via_155f18

static void
via_155f18(struct bregs *regs)
{
    int fbsize = GET_GLOBAL(ViaFBsize), ramspeed = GET_GLOBAL(ViaRamSpeed);
    if (fbsize < 0 || ramspeed < 0) {
        set_code_invalid(regs, RET_EUNSUPPORTED);
        return;
    }
    regs->eax = 0x5f;
    regs->ebx = 0x500 | (ramspeed << 4) | fbsize;
    regs->ecx = 0x060;
    set_success(regs);
}

开发者ID:OpenXT-Extras，项目名称:seabios，代码行数:13，代码来源:vgahooks.c

示例4: ata_reset

// Reset a drive
static void
ata_reset(struct atadrive_s *adrive_g)
{
    struct ata_channel_s *chan_gf = GET_GLOBAL(adrive_g->chan_gf);
    u8 slave = GET_GLOBAL(adrive_g->slave);
    u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1);
    u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2);

    dprintf(6, "ata_reset drive=%p\n", &adrive_g->drive);
    // Pulse SRST
    outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN | ATA_CB_DC_SRST, iobase2+ATA_CB_DC);
    udelay(5);
    outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN, iobase2+ATA_CB_DC);
    msleep(2);

    // wait for device to become not busy.
    int status = await_not_bsy(iobase1);
    if (status < 0)
        goto done;
    if (slave) {
        // Change device.
        u64 end = calc_future_tsc(IDE_TIMEOUT);
        for (;;) {
            outb(ATA_CB_DH_DEV1, iobase1 + ATA_CB_DH);
            status = ndelay_await_not_bsy(iobase1);
            if (status < 0)
                goto done;
            if (inb(iobase1 + ATA_CB_DH) == ATA_CB_DH_DEV1)
                break;
            // Change drive request failed to take effect - retry.
            if (check_tsc(end)) {
                warn_timeout();
                goto done;
            }
        }
    } else {
        // QEMU doesn't reset dh on reset, so set it explicitly.
        outb(ATA_CB_DH_DEV0, iobase1 + ATA_CB_DH);
    }

    // On a user-reset request, wait for RDY if it is an ATA device.
    u8 type=GET_GLOBAL(adrive_g->drive.type);
    if (type == DTYPE_ATA)
        status = await_rdy(iobase1);

done:
    // Enable interrupts
    outb(ATA_CB_DC_HD15, iobase2+ATA_CB_DC);

    dprintf(6, "ata_reset exit status=%x\n", status);
}

开发者ID:Fantu，项目名称:pkg-seabios，代码行数:52，代码来源:ata.c

示例5: disk_1308

// read disk drive parameters
static void noinline
disk_1308(struct bregs *regs, struct drive_s *drive_g)
{
    u16 ebda_seg = get_ebda_seg();
    // Get logical geometry from table
    u16 nlc, nlh, nlspt;
    fillLCHS(drive_g, &nlc, &nlh, &nlspt);
    nlc--;
    nlh--;
    u8 count;
    if (regs->dl < EXTSTART_HD) {
        // Floppy
        count = GET_GLOBAL(FloppyCount);

        if (CONFIG_CDROM_EMU
            && drive_g == GLOBALFLAT2GLOBAL(GET_GLOBAL(cdemu_drive_gf)))
            regs->bx = GET_EBDA2(ebda_seg, cdemu.media) * 2;
        else
            regs->bx = GET_GLOBAL(drive_g->floppy_type);

        // set es & di to point to 11 byte diskette param table in ROM
        regs->es = SEG_BIOS;
        regs->di = (u32)&diskette_param_table2;
    } else if (regs->dl < EXTSTART_CD) {
        // Hard drive
        count = GET_BDA(hdcount);
        nlc--;  // last sector reserved
    } else {
        // Not supported on CDROM
        disk_ret(regs, DISK_RET_EPARAM);
        return;
    }

    if (CONFIG_CDROM_EMU && GET_EBDA2(ebda_seg, cdemu.active)) {
        u8 emudrive = GET_EBDA2(ebda_seg, cdemu.emulated_extdrive);
        if (((emudrive ^ regs->dl) & 0x80) == 0)
            // Note extra drive due to emulation.
            count++;
        if (regs->dl < EXTSTART_HD && count > 2)
            // Max of two floppy drives.
            count = 2;
    }

    regs->al = 0;
    regs->ch = nlc & 0xff;
    regs->cl = ((nlc >> 2) & 0xc0) | (nlspt & 0x3f);
    regs->dh = nlh;

    disk_ret(regs, DISK_RET_SUCCESS);
    regs->dl = count;
}

开发者ID:MrPavel3243，项目名称:limbo-android，代码行数:52，代码来源:disk.c

示例6: bochsvga_list_modes

void
bochsvga_list_modes(u16 seg, u16 *dest, u16 *last)
{
    struct bochsvga_mode *m = bochsvga_modes;
    if (GET_GLOBAL(dispi_found)) {
        for (; m < &bochsvga_modes[ARRAY_SIZE(bochsvga_modes)] && dest<last; m++) {
            u16 mode = GET_GLOBAL(m->mode);
            if (mode == 0xffff)
                continue;
            SET_FARVAR(seg, *dest, mode);
            dest++;
        }
    }
    stdvga_list_modes(seg, dest, last);
}

开发者ID:GrimDerp，项目名称:TriforceAFL，代码行数:15，代码来源:bochsvga.c

示例7: vbe_104f06

static void
vbe_104f06(struct bregs *regs)
{
    if (regs->bl > 0x02)
        goto fail;
    struct vgamode_s *vmode_g = get_current_mode();
    if (! vmode_g)
        goto fail;
    int bpp = vga_bpp(vmode_g);

    if (regs->bl == 0x00) {
        int ret = vgahw_set_linelength(vmode_g, DIV_ROUND_UP(regs->cx * bpp, 8));
        if (ret)
            goto fail;
    } else if (regs->bl == 0x02) {
        int ret = vgahw_set_linelength(vmode_g, regs->cx);
        if (ret)
            goto fail;
    }
    int linelength = vgahw_get_linelength(vmode_g);
    if (linelength < 0)
        goto fail;

    regs->bx = linelength;
    regs->cx = (linelength * 8) / bpp;
    regs->dx = GET_GLOBAL(VBE_total_memory) / linelength;
    regs->ax = 0x004f;
    return;
fail:
    regs->ax = 0x014f;
}

开发者ID:AjayMashi，项目名称:x-tier，代码行数:31，代码来源:vbe.c

示例8: ata_cmd_nondata

// Send an ata command that does not transfer any further data.
int
ata_cmd_nondata(struct atadrive_s *adrive_g, struct ata_pio_command *cmd)
{
    struct ata_channel_s *chan_gf = GET_GLOBAL(adrive_g->chan_gf);
    u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1);
    u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2);

    // Disable interrupts
    outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN, iobase2 + ATA_CB_DC);

    int ret = send_cmd(adrive_g, cmd);
    if (ret)
        goto fail;
    ret = ndelay_await_not_bsy(iobase1);
    if (ret < 0)
        goto fail;

    if (ret & ATA_CB_STAT_ERR) {
        dprintf(6, "nondata cmd : read error (status=%02x err=%02x)\n"
                , ret, inb(iobase1 + ATA_CB_ERR));
        ret = -4;
        goto fail;
    }
    if (ret & ATA_CB_STAT_DRQ) {
        dprintf(6, "nondata cmd : DRQ set (status %02x)\n", ret);
        ret = -5;
        goto fail;
    }

fail:
    // Enable interrupts
    outb(ATA_CB_DC_HD15, iobase2+ATA_CB_DC);

    return ret;
}

开发者ID:Fantu，项目名称:pkg-seabios，代码行数:36，代码来源:ata.c

示例9: vbe_104f08

static void
vbe_104f08(struct bregs *regs)
{
    struct vgamode_s *vmode_g = get_current_mode();
    if (! vmode_g)
        goto fail;
    u8 memmodel = GET_GLOBAL(vmode_g->memmodel);
    if (memmodel == MM_DIRECT || memmodel == MM_YUV) {
        regs->ax = 0x034f;
        return;
    }
    if (regs->bl > 1)
        goto fail;
    if (regs->bl == 0) {
        int ret = vgahw_set_dacformat(vmode_g, regs->bh);
        if (ret < 0)
            goto fail;
    }
    int ret = vgahw_get_dacformat(vmode_g);
    if (ret < 0)
        goto fail;
    regs->bh = ret;
    regs->ax = 0x004f;
    return;
fail:
    regs->ax = 0x014f;
}

开发者ID:AjayMashi，项目名称:x-tier，代码行数:27，代码来源:vbe.c

示例10: usb_kbd_active

// Test if USB keyboard is active.
inline int
usb_kbd_active(void)
{
    if (! CONFIG_USB_KEYBOARD)
        return 0;
    return GET_GLOBAL(keyboard_pipe) != NULL;
}

开发者ID:KevinOConnor，项目名称:seabios，代码行数:8，代码来源:usb-hid.c

示例11: usb_mouse_active

// Test if USB mouse is active.
inline int
usb_mouse_active(void)
{
    if (! CONFIG_USB_MOUSE)
        return 0;
    return GET_GLOBAL(mouse_pipe) != NULL;
}

开发者ID:KevinOConnor，项目名称:seabios，代码行数:8，代码来源:usb-hid.c

示例12: getDrive

struct drive_s *
getDrive(u8 exttype, u8 extdriveoffset)
{
    if (extdriveoffset >= ARRAY_SIZE(IDMap[0]))
        return NULL;
    return GET_GLOBAL(IDMap[exttype][extdriveoffset]);
}

开发者ID:ts468，项目名称:seabios-tpm，代码行数:7，代码来源:block.c

示例13: extended_access

// Perform read/write/verify using new-style "int13ext" accesses.
static void noinline
extended_access(struct bregs *regs, struct drive_s *drive_g, u16 command)
{
    struct disk_op_s dop;
    // Get lba and check.
    dop.lba = GET_INT13EXT(regs, lba);
    dop.command = command;
    dop.drive_g = drive_g;
    if (dop.lba >= GET_GLOBAL(drive_g->sectors)) {
        warn_invalid(regs);
        disk_ret(regs, DISK_RET_EPARAM);
        return;
    }

    dop.buf_fl = SEGOFF_TO_FLATPTR(GET_INT13EXT(regs, data));
    dop.count = GET_INT13EXT(regs, count);
    if (! dop.count) {
        // Nothing to do.
        disk_ret(regs, DISK_RET_SUCCESS);
        return;
    }

    int status = send_disk_op(&dop);

    SET_INT13EXT(regs, count, dop.count);

    disk_ret(regs, status);
}

开发者ID:MrPavel3243，项目名称:limbo-android，代码行数:29，代码来源:disk.c

示例14: intel_155f40

static void
intel_155f40(struct bregs *regs)
{
    regs->ax = 0x005f;
    regs->cl = GET_GLOBAL(IntelDisplayId);
    set_success(regs);
}

开发者ID:OpenXT-Extras，项目名称:seabios，代码行数:7，代码来源:vgahooks.c

示例15: cdb_cmd_data

// Route command to low-level handler.
static int
cdb_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize)
{
    u8 type = GET_GLOBAL(op->drive_g->type);
    switch (type) {
    case DTYPE_ATA_ATAPI:
        return atapi_cmd_data(op, cdbcmd, blocksize);
    case DTYPE_USB:
        return usb_cmd_data(op, cdbcmd, blocksize);
    case DTYPE_UAS:
        return uas_cmd_data(op, cdbcmd, blocksize);
    case DTYPE_AHCI_ATAPI:
        return ahci_cmd_data(op, cdbcmd, blocksize);
    case DTYPE_VIRTIO_SCSI:
        return virtio_scsi_cmd_data(op, cdbcmd, blocksize);
    case DTYPE_LSI_SCSI:
        return lsi_scsi_cmd_data(op, cdbcmd, blocksize);
    case DTYPE_ESP_SCSI:
        return esp_scsi_cmd_data(op, cdbcmd, blocksize);
    case DTYPE_MEGASAS:
        return megasas_cmd_data(op, cdbcmd, blocksize);
    default:
        op->count = 0;
        return DISK_RET_EPARAM;
    }
}

开发者ID:OpenXT-Extras，项目名称:seabios，代码行数:27，代码来源:blockcmd.c

示例16: handle_13

// INT 13h Fixed Disk Services Entry Point
void VISIBLE16
handle_13(struct bregs *regs)
{
    debug_enter(regs, DEBUG_HDL_13);
    u8 extdrive = regs->dl;

    if (CONFIG_CDROM_EMU) {
        if (regs->ah == 0x4b) {
            cdemu_134b(regs);
            return;
        }
        u16 ebda_seg = get_ebda_seg();
        if (GET_EBDA2(ebda_seg, cdemu.active)) {
            u8 emudrive = GET_EBDA2(ebda_seg, cdemu.emulated_extdrive);
            if (extdrive == emudrive) {
                // Access to an emulated drive.
                struct drive_s *cdemu = GET_GLOBAL(cdemu_drive);
                if (regs->ah > 0x16) {
                    // Only old-style commands supported.
                    disk_13XX(regs, cdemu);
                    return;
                }
                disk_13(regs, cdemu);
                return;
            }
            if (extdrive < EXTSTART_CD && ((emudrive ^ extdrive) & 0x80) == 0)
                // Adjust id to make room for emulated drive.
                extdrive--;
        }
    }
    handle_legacy_disk(regs, extdrive);
}

开发者ID:joshsyu，项目名称:PQEMU，代码行数:33，代码来源:disk.c

示例17: ramdisk_copy

static int
ramdisk_copy(struct disk_op_s *op, int iswrite)
{
    u32 offset = GET_GLOBAL(op->drive_g->cntl_id);
    offset += (u32)op->lba * DISK_SECTOR_SIZE;
    u64 opd = GDT_DATA | GDT_LIMIT(0xfffff) | GDT_BASE((u32)op->buf_fl);
    u64 ramd = GDT_DATA | GDT_LIMIT(0xfffff) | GDT_BASE(offset);

    u64 gdt[6];
    if (iswrite) {
        gdt[2] = opd;
        gdt[3] = ramd;
    } else {
        gdt[2] = ramd;
        gdt[3] = opd;
    }

    // Call int 1587 to copy data.
    struct bregs br;
    memset(&br, 0, sizeof(br));
    br.flags = F_CF|F_IF;
    br.ah = 0x87;
    br.es = GET_SEG(SS);
    br.si = (u32)gdt;
    br.cx = op->count * DISK_SECTOR_SIZE / 2;
    call16_int(0x15, &br);

    if (br.flags & F_CF)
        return DISK_RET_EBADTRACK;
    return DISK_RET_SUCCESS;
}

开发者ID:joshsyu，项目名称:PQEMU，代码行数:31，代码来源:ramdisk.c

示例18: cdemu_read

static int
cdemu_read(struct disk_op_s *op)
{
    struct drive_s *drive_g;
    drive_g = GLOBALFLAT2GLOBAL(GET_LOW(CDEmu.emulated_drive_gf));
    struct disk_op_s dop;
    dop.drive_g = drive_g;
    dop.command = op->command;
    dop.lba = GET_LOW(CDEmu.ilba) + op->lba / 4;

    int count = op->count;
    op->count = 0;
    u8 *cdbuf_fl = GET_GLOBAL(bounce_buf_fl);

    if (op->lba & 3) {
        // Partial read of first block.
        dop.count = 1;
        dop.buf_fl = cdbuf_fl;
        int ret = process_op(&dop);
        if (ret)
            return ret;
        u8 thiscount = 4 - (op->lba & 3);
        if (thiscount > count)
            thiscount = count;
        count -= thiscount;
        memcpy_fl(op->buf_fl, cdbuf_fl + (op->lba & 3) * 512, thiscount * 512);
        op->buf_fl += thiscount * 512;
        op->count += thiscount;
        dop.lba++;
    }

    if (count > 3) {
        // Read n number of regular blocks.
        dop.count = count / 4;
        dop.buf_fl = op->buf_fl;
        int ret = process_op(&dop);
        op->count += dop.count * 4;
        if (ret)
            return ret;
        u8 thiscount = count & ~3;
        count &= 3;
        op->buf_fl += thiscount * 512;
        dop.lba += thiscount / 4;
    }

    if (count) {
        // Partial read on last block.
        dop.count = 1;
        dop.buf_fl = cdbuf_fl;
        int ret = process_op(&dop);
        if (ret)
            return ret;
        u8 thiscount = count;
        memcpy_fl(op->buf_fl, cdbuf_fl, thiscount * 512);
        op->count += thiscount;
    }

    return DISK_RET_SUCCESS;
}

开发者ID:OpenXT-Extras，项目名称:seabios，代码行数:59，代码来源:cdrom.c

示例19: smi_157f02

static void
smi_157f02(struct bregs *regs)
{
    /* Boot Display Device Override */
    regs->ax = 0x007f;
    regs->bl = GET_GLOBAL(SmiBootDisplay);
    set_success(regs);
}

开发者ID:AhmadQasim，项目名称:GPU-Virtualization，代码行数:8，代码来源:vgahooks.c

示例20: vbe_104f00

static void
vbe_104f00(struct bregs *regs)
{
    u16 seg = regs->es;
    struct vbe_info *info = (void*)(regs->di+0);

    if (GET_FARVAR(seg, info->signature) == VBE2_SIGNATURE) {
        dprintf(4, "Get VBE Controller: VBE2 Signature found\n");
    } else if (GET_FARVAR(seg, info->signature) == VESA_SIGNATURE) {
        dprintf(4, "Get VBE Controller: VESA Signature found\n");
    } else {
        dprintf(4, "Get VBE Controller: Invalid Signature\n");
    }

    memset_far(seg, info, 0, sizeof(*info));

    SET_FARVAR(seg, info->signature, VESA_SIGNATURE);

    SET_FARVAR(seg, info->version, 0x0300);

    SET_FARVAR(seg, info->oem_string,
            SEGOFF(get_global_seg(), (u32)VBE_OEM_STRING));
    SET_FARVAR(seg, info->capabilities, GET_GLOBAL(VBE_capabilities));

    /* We generate our mode list in the reserved field of the info block */
    u16 *destmode = (void*)info->reserved;
    SET_FARVAR(seg, info->video_mode, SEGOFF(seg, (u32)destmode));

    /* Total memory (in 64k blocks) */
    SET_FARVAR(seg, info->total_memory
               , GET_GLOBAL(VBE_total_memory) / (64*1024));

    SET_FARVAR(seg, info->oem_vendor_string,
            SEGOFF(get_global_seg(), (u32)VBE_VENDOR_STRING));
    SET_FARVAR(seg, info->oem_product_string,
            SEGOFF(get_global_seg(), (u32)VBE_PRODUCT_STRING));
    SET_FARVAR(seg, info->oem_revision_string,
            SEGOFF(get_global_seg(), (u32)VBE_REVISION_STRING));

    /* Fill list of modes */
    u16 *last = (void*)&info->reserved[sizeof(info->reserved)];
    vgahw_list_modes(seg, destmode, last - 1);

    regs->ax = 0x004f;
}

开发者ID:AjayMashi，项目名称:x-tier，代码行数:45，代码来源:vbe.c

注：本文中的GET_GLOBAL函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ GET_GUID_HOB_DATA函数代码示例发布时间：2022-05-30

C++ GET_GAME_STATE函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18295|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9687|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8184|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8553|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8463|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9399|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8434|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7869|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8419|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7398|2022-11-06

客服电话

电子邮件

C++ GET_GLOBAL函数代码示例

示例1: stdvga_find_mode

示例2: get_translation

示例3: via_155f18

示例4: ata_reset

示例5: disk_1308

示例6: bochsvga_list_modes

示例7: vbe_104f06

示例8: ata_cmd_nondata

示例9: vbe_104f08

示例10: usb_kbd_active

示例11: usb_mouse_active

示例12: getDrive

示例13: extended_access

示例14: intel_155f40

示例15: cdb_cmd_data

示例16: handle_13

示例17: ramdisk_copy

示例18: cdemu_read

示例19: smi_157f02

示例20: vbe_104f00

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-22048

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053