本文整理汇总了C++中GET_PKT_DATA函数的典型用法代码示例。如果您正苦于以下问题：C++ GET_PKT_DATA函数的具体用法？C++ GET_PKT_DATA怎么用？C++ GET_PKT_DATA使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了GET_PKT_DATA函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: SCEnter
/**
* \brief Setup a pseudo packet (tunnel)
*
* \param parent parent packet for this pseudo pkt
* \param pkt raw packet data
* \param len packet data length
* \param proto protocol of the tunneled packet
*
* \retval p the pseudo packet or NULL if out of memory
*/
Packet *PacketTunnelPktSetup(ThreadVars *tv, DecodeThreadVars *dtv, Packet *parent,
uint8_t *pkt, uint16_t len, uint8_t proto, PacketQueue *pq)
{
int ret;
SCEnter();
/* get us a packet */
Packet *p = PacketGetFromQueueOrAlloc();
if (unlikely(p == NULL)) {
SCReturnPtr(NULL, "Packet");
}
/* copy packet and set lenght, proto */
PacketCopyData(p, pkt, len);
p->recursion_level = parent->recursion_level + 1;
p->ts.tv_sec = parent->ts.tv_sec;
p->ts.tv_usec = parent->ts.tv_usec;
p->datalink = DLT_RAW;
/* set the root ptr to the lowest layer */
if (parent->root != NULL)
p->root = parent->root;
else
p->root = parent;
/* tell new packet it's part of a tunnel */
SET_TUNNEL_PKT(p);
ret = DecodeTunnel(tv, dtv, p, GET_PKT_DATA(p),
GET_PKT_LEN(p), pq, proto);
if (unlikely(ret != TM_ECODE_OK)) {
/* Not a tunnel packet, just a pseudo packet */
p->root = NULL;
UNSET_TUNNEL_PKT(p);
TmqhOutputPacketpool(tv, p);
SCReturnPtr(NULL, "Packet");
}
/* tell parent packet it's part of a tunnel */
SET_TUNNEL_PKT(parent);
/* increment tunnel packet refcnt in the root packet */
TUNNEL_INCR_PKT_TPR(p);
/* disable payload (not packet) inspection on the parent, as the payload
* is the packet we will now run through the system separately. We do
* check it against the ip/port/other header checks though */
DecodeSetNoPayloadInspectionFlag(parent);
SCReturnPtr(p, "Packet");
}
开发者ID:lb7ba6，项目名称:suricata，代码行数:63，代码来源:decode.c
示例2: DecodeRaw
void DecodeRaw(ThreadVars *tv, DecodeThreadVars *dtv, Packet *p, uint8_t *pkt, uint16_t len, PacketQueue *pq)
{
SCPerfCounterIncr(dtv->counter_raw, tv->sc_perf_pca);
/* If it is ipv4 or ipv6 it should at least be the size of ipv4 */
if (len < IPV4_HEADER_LEN) {
ENGINE_SET_EVENT(p,IPV4_PKT_TOO_SMALL);
return;
}
if (IP_GET_RAW_VER(pkt) == 4) {
SCLogDebug("IPV4 Packet");
DecodeIPV4(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
} else if (IP_GET_RAW_VER(pkt) == 6) {
SCLogDebug("IPV6 Packet");
DecodeIPV6(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
} else {
SCLogDebug("Unknown ip version %" PRIu8 "", IP_GET_RAW_VER(pkt));
ENGINE_SET_EVENT(p,IPRAW_INVALID_IPV);
}
return;
}
开发者ID:2help，项目名称:suricata，代码行数:22，代码来源:decode-raw.c
示例3: DecodePcap
/**
* \brief This function passes off to link type decoders.
*
* DecodePcap reads packets from the PacketQueue and passes
* them off to the proper link type decoder.
*
* \param t pointer to ThreadVars
* \param p pointer to the current packet
* \param data pointer that gets cast into PcapThreadVars for ptv
* \param pq pointer to the current PacketQueue
*/
TmEcode DecodePcap(ThreadVars *tv, Packet *p, void *data, PacketQueue *pq, PacketQueue *postpq)
{
SCEnter();
DecodeThreadVars *dtv = (DecodeThreadVars *)data;
/* XXX HACK: flow timeout can call us for injected pseudo packets
* see bug: https://redmine.openinfosecfoundation.org/issues/1107 */
if (p->flags & PKT_PSEUDO_STREAM_END)
return TM_ECODE_OK;
/* update counters */
DecodeUpdatePacketCounters(tv, dtv, p);
/* call the decoder */
switch(p->datalink) {
case LINKTYPE_LINUX_SLL:
DecodeSll(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
break;
case LINKTYPE_ETHERNET:
DecodeEthernet(tv, dtv, p,GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
break;
case LINKTYPE_PPP:
DecodePPP(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
break;
case LINKTYPE_RAW:
DecodeRaw(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
break;
case LINKTYPE_NULL:
DecodeNull(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
break;
default:
SCLogError(SC_ERR_DATALINK_UNIMPLEMENTED, "Error: datalink type %" PRId32 " not yet supported in module DecodePcap", p->datalink);
break;
}
PacketDecodeFinalize(tv, dtv, p);
SCReturnInt(TM_ECODE_OK);
}
开发者ID:norg，项目名称:suricata，代码行数:50，代码来源:source-pcap.c
示例4: DecodeIPFW
/**
* \brief This function passes off to link type decoders.
* \todo Unit tests are needed for this module.
*
* DecodeIPFW reads packets from the PacketQueue and passes
* them off to the proper link type decoder.
*
* \param tv pointer to ThreadVars
* \param p pointer to the current packet
* \param data pointer that gets cast into IPFWThreadVars for ptv
* \param pq pointer to the PacketQueue
*/
TmEcode DecodeIPFW(ThreadVars *tv, Packet *p, void *data, PacketQueue *pq, PacketQueue *postpq)
{
IPV4Hdr *ip4h = (IPV4Hdr *)GET_PKT_DATA(p);
IPV6Hdr *ip6h = (IPV6Hdr *)GET_PKT_DATA(p);
DecodeThreadVars *dtv = (DecodeThreadVars *)data;
SCEnter();
/* XXX HACK: flow timeout can call us for injected pseudo packets
* see bug: https://redmine.openinfosecfoundation.org/issues/1107 */
if (p->flags & PKT_PSEUDO_STREAM_END)
return TM_ECODE_OK;
/* update counters */
SCPerfCounterIncr(dtv->counter_pkts, tv->sc_perf_pca);
SCPerfCounterAddUI64(dtv->counter_bytes, tv->sc_perf_pca, GET_PKT_LEN(p));
SCPerfCounterAddUI64(dtv->counter_avg_pkt_size, tv->sc_perf_pca, GET_PKT_LEN(p));
SCPerfCounterSetUI64(dtv->counter_max_pkt_size, tv->sc_perf_pca, GET_PKT_LEN(p));
/* Process IP packets */
if (IPV4_GET_RAW_VER(ip4h) == 4) {
SCLogDebug("DecodeIPFW ip4 processing");
DecodeIPV4(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
} else if(IPV6_GET_RAW_VER(ip6h) == 6) {
SCLogDebug("DecodeIPFW ip6 processing");
DecodeIPV6(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
} else {
/* We don't support anything besides IP packets for now, bridged packets? */
SCLogInfo("IPFW unknown protocol support %02x", *GET_PKT_DATA(p));
SCReturnInt(TM_ECODE_FAILED);
}
PacketDecodeFinalize(tv, dtv, p);
SCReturnInt(TM_ECODE_OK);
}
开发者ID:lb7ba6，项目名称:suricata，代码行数:50，代码来源:source-ipfw.c
示例5: DecodeIPV6RouteTest01
/**
* \test routing header decode
*/
static int DecodeIPV6RouteTest01 (void)
{
uint8_t raw_pkt1[] = {
0x60, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x2b, 0x40,
0x20, 0x01, 0xaa, 0xaa, 0x00, 0x01, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02,
0x20, 0x01, 0xaa, 0xaa, 0x00, 0x01, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0xb2, 0xed, 0x00, 0x50, 0x1b, 0xc7, 0x6a, 0xdf,
0x00, 0x00, 0x00, 0x00, 0x50, 0x02, 0x20, 0x00,
0xfa, 0x87, 0x00, 0x00,
};
Packet *p1 = PacketGetFromAlloc();
if (unlikely(p1 == NULL))
return 0;
ThreadVars tv;
DecodeThreadVars dtv;
int result = 0;
PacketQueue pq;
FlowInitConfig(FLOW_QUIET);
memset(&pq, 0, sizeof(PacketQueue));
memset(&tv, 0, sizeof(ThreadVars));
memset(&dtv, 0, sizeof(DecodeThreadVars));
PacketCopyData(p1, raw_pkt1, sizeof(raw_pkt1));
DecodeIPV6(&tv, &dtv, p1, GET_PKT_DATA(p1), GET_PKT_LEN(p1), &pq);
if (!(IPV6_EXTHDR_ISSET_RH(p1))) {
printf("ipv6 routing header not detected: ");
goto end;
}
if (p1->ip6eh.ip6_exthdrs[0].len != 8) {
printf("ipv6 routing length incorrect: ");
goto end;
}
result = 1;
end:
PACKET_RECYCLE(p1);
SCFree(p1);
FlowShutdown();
return result;
}
开发者ID:btbytes，项目名称:suricata，代码行数:53，代码来源:decode-ipv6.c
示例6: DecodeIPV6HopTest01
/**
* \test HOP header decode
*/
static int DecodeIPV6HopTest01 (void)
{
uint8_t raw_pkt1[] = {
0x60,0x00,0x00,0x00,0x00,0x20,0x00,0x01,0xfe,0x80,0x00,0x00,0x00,0x00,0x00,0x00,
0x02,0x0f,0xfe,0xff,0xfe,0x98,0x3d,0x01,0xff,0x02,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x3a,0x00,0x05,0x02,0x00,0x00,0x00,0x00,
0x82,0x00,0x1c,0x6f,0x27,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
};
Packet *p1 = PacketGetFromAlloc();
if (unlikely(p1 == NULL))
return 0;
ThreadVars tv;
DecodeThreadVars dtv;
int result = 0;
PacketQueue pq;
FlowInitConfig(FLOW_QUIET);
memset(&pq, 0, sizeof(PacketQueue));
memset(&tv, 0, sizeof(ThreadVars));
memset(&dtv, 0, sizeof(DecodeThreadVars));
PacketCopyData(p1, raw_pkt1, sizeof(raw_pkt1));
DecodeIPV6(&tv, &dtv, p1, GET_PKT_DATA(p1), GET_PKT_LEN(p1), &pq);
if (!(IPV6_EXTHDR_ISSET_HH(p1))) {
printf("ipv6 routing header not detected: ");
goto end;
}
if (p1->ip6eh.ip6_exthdrs[0].len != 8) {
printf("ipv6 routing length incorrect: ");
goto end;
}
if (ENGINE_ISSET_EVENT(p1, IPV6_HOPOPTS_UNKNOWN_OPT)) {
printf("engine event IPV6_HOPOPTS_UNKNOWN_OPT set: ");
goto end;
}
result = 1;
end:
PACKET_RECYCLE(p1);
SCFree(p1);
FlowShutdown();
return result;
}
开发者ID:btbytes，项目名称:suricata，代码行数:52，代码来源:decode-ipv6.c
示例7: DecodeNFQ
/**
* \brief Decode a packet coming from NFQ
*/
TmEcode DecodeNFQ(ThreadVars *tv, Packet *p, void *data, PacketQueue *pq, PacketQueue *postpq)
{
IPV4Hdr *ip4h = (IPV4Hdr *)GET_PKT_DATA(p);
IPV6Hdr *ip6h = (IPV6Hdr *)GET_PKT_DATA(p);
DecodeThreadVars *dtv = (DecodeThreadVars *)data;
/* XXX HACK: flow timeout can call us for injected pseudo packets
* see bug: https://redmine.openinfosecfoundation.org/issues/1107 */
if (p->flags & PKT_PSEUDO_STREAM_END)
return TM_ECODE_OK;
SCPerfCounterIncr(dtv->counter_pkts, tv->sc_perf_pca);
SCPerfCounterAddUI64(dtv->counter_bytes, tv->sc_perf_pca, GET_PKT_LEN(p));
SCPerfCounterAddUI64(dtv->counter_avg_pkt_size, tv->sc_perf_pca, GET_PKT_LEN(p));
SCPerfCounterSetUI64(dtv->counter_max_pkt_size, tv->sc_perf_pca, GET_PKT_LEN(p));
#if 0
SCPerfCounterAddDouble(dtv->counter_bytes_per_sec, tv->sc_perf_pca, GET_PKT_LEN(p));
SCPerfCounterAddDouble(dtv->counter_mbit_per_sec, tv->sc_perf_pca,
(GET_PKT_LEN(p) * 8)/1000000.0);
#endif
if (IPV4_GET_RAW_VER(ip4h) == 4) {
SCLogDebug("IPv4 packet");
DecodeIPV4(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
} else if(IPV6_GET_RAW_VER(ip6h) == 6) {
SCLogDebug("IPv6 packet");
DecodeIPV6(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
} else {
SCLogDebug("packet unsupported by NFQ, first byte: %02x", *GET_PKT_DATA(p));
}
PacketDecodeFinalize(tv, dtv, p);
return TM_ECODE_OK;
}
开发者ID:yuecailing，项目名称:rep_test，代码行数:39，代码来源:source-nfq.c
示例8: AlertJsonPacket
static void AlertJsonPacket(const Packet *p, json_t *js)
{
unsigned long len = GET_PKT_LEN(p) * 2;
uint8_t encoded_packet[len];
Base64Encode((unsigned char*) GET_PKT_DATA(p), GET_PKT_LEN(p),
encoded_packet, &len);
json_object_set_new(js, "packet", json_string((char *)encoded_packet));
/* Create packet info. */
json_t *packetinfo_js = json_object();
if (unlikely(packetinfo_js == NULL)) {
return;
}
json_object_set_new(packetinfo_js, "linktype", json_integer(p->datalink));
json_object_set_new(js, "packet_info", packetinfo_js);
}
开发者ID:P1sec，项目名称:suricata，代码行数:16，代码来源:output-json-alert.c
示例9: AlertFastLogDecoderEvent
TmEcode AlertFastLogDecoderEvent(ThreadVars *tv, Packet *p, void *data, PacketQueue *pq, PacketQueue *postpq)
{
AlertFastLogThread *aft = (AlertFastLogThread *)data;
int i;
char timebuf[64];
char *action = "";
extern uint8_t engine_mode;
if (p->alerts.cnt == 0)
return TM_ECODE_OK;
CreateTimeString(&p->ts, timebuf, sizeof(timebuf));
for (i = 0; i < p->alerts.cnt; i++) {
PacketAlert *pa = &p->alerts.alerts[i];
if (unlikely(pa->s == NULL)) {
continue;
}
if ((pa->action & ACTION_DROP) && IS_ENGINE_MODE_IPS(engine_mode)) {
action = "[Drop] ";
} else if (pa->action & ACTION_DROP) {
action = "[wDrop] ";
}
SCMutexLock(&aft->file_ctx->fp_mutex);
fprintf(aft->file_ctx->fp, "%s %s[**] [%" PRIu32 ":%" PRIu32
":%" PRIu32 "] %s [**] [Classification: %s] [Priority: "
"%" PRIu32 "] [**] [Raw pkt: ", timebuf, action, pa->s->gid,
pa->s->id, pa->s->rev, pa->s->msg, pa->s->class_msg, pa->s->prio);
PrintRawLineHexFp(aft->file_ctx->fp, GET_PKT_DATA(p), GET_PKT_LEN(p) < 32 ? GET_PKT_LEN(p) : 32);
if (p->pcap_cnt != 0) {
fprintf(aft->file_ctx->fp, "] [pcap file packet: %"PRIu64"]\n", p->pcap_cnt);
} else {
fprintf(aft->file_ctx->fp, "]\n");
}
fflush(aft->file_ctx->fp);
aft->file_ctx->alerts++;
SCMutexUnlock(&aft->file_ctx->fp_mutex);
}
return TM_ECODE_OK;
}
开发者ID:decanio，项目名称:suricata-tilera，代码行数:46，代码来源:alert-fastlog.c
示例10: DecodeErfDag
/**
* \brief This function passes off to link type decoders.
*
* DecodeErfDag reads packets from the PacketQueue and passes
* them off to the proper link type decoder.
*
* \param t pointer to ThreadVars
* \param p pointer to the current packet
* \param data pointer that gets cast into PcapThreadVars for ptv
* \param pq pointer to the current PacketQueue
*/
TmEcode
DecodeErfDag(ThreadVars *tv, Packet *p, void *data, PacketQueue *pq,
PacketQueue *postpq)
{
SCEnter();
DecodeThreadVars *dtv = (DecodeThreadVars *)data;
/* XXX HACK: flow timeout can call us for injected pseudo packets
* see bug: https://redmine.openinfosecfoundation.org/issues/1107 */
if (p->flags & PKT_PSEUDO_STREAM_END)
return TM_ECODE_OK;
/* update counters */
SCPerfCounterIncr(dtv->counter_pkts, tv->sc_perf_pca);
// SCPerfCounterIncr(dtv->counter_pkts_per_sec, tv->sc_perf_pca);
SCPerfCounterAddUI64(dtv->counter_bytes, tv->sc_perf_pca, GET_PKT_LEN(p));
#if 0
SCPerfCounterAddDouble(dtv->counter_bytes_per_sec, tv->sc_perf_pca, GET_PKT_LEN(p));
SCPerfCounterAddDouble(dtv->counter_mbit_per_sec, tv->sc_perf_pca,
(GET_PKT_LEN(p) * 8)/1000000.0);
#endif
SCPerfCounterAddUI64(dtv->counter_avg_pkt_size, tv->sc_perf_pca,
GET_PKT_LEN(p));
SCPerfCounterSetUI64(dtv->counter_max_pkt_size, tv->sc_perf_pca,
GET_PKT_LEN(p));
/* call the decoder */
switch(p->datalink) {
case LINKTYPE_ETHERNET:
DecodeEthernet(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
break;
default:
SCLogError(SC_ERR_DATALINK_UNIMPLEMENTED,
"Error: datalink type %" PRId32
" not yet supported in module DecodeErfDag",
p->datalink);
break;
}
PacketDecodeFinalize(tv, dtv, p);
SCReturnInt(TM_ECODE_OK);
}
开发者ID:lb7ba6，项目名称:suricata，代码行数:56，代码来源:source-erf-dag.c
示例11: DecodePcapFile
TmEcode DecodePcapFile(ThreadVars *tv, Packet *p, void *data, PacketQueue *pq, PacketQueue *postpq)
{
SCEnter();
DecodeThreadVars *dtv = (DecodeThreadVars *)data;
/* XXX HACK: flow timeout can call us for injected pseudo packets
* see bug: https://redmine.openinfosecfoundation.org/issues/1107 */
if (p->flags & PKT_PSEUDO_STREAM_END)
return TM_ECODE_OK;
/* update counters */
SCPerfCounterIncr(dtv->counter_pkts, tv->sc_perf_pca);
// SCPerfCounterIncr(dtv->counter_pkts_per_sec, tv->sc_perf_pca);
SCPerfCounterAddUI64(dtv->counter_bytes, tv->sc_perf_pca, GET_PKT_LEN(p));
#if 0
SCPerfCounterAddDouble(dtv->counter_bytes_per_sec, tv->sc_perf_pca, GET_PKT_LEN(p));
SCPerfCounterAddDouble(dtv->counter_mbit_per_sec, tv->sc_perf_pca,
(GET_PKT_LEN(p) * 8)/1000000.0 );
#endif
SCPerfCounterAddUI64(dtv->counter_avg_pkt_size, tv->sc_perf_pca, GET_PKT_LEN(p));
SCPerfCounterSetUI64(dtv->counter_max_pkt_size, tv->sc_perf_pca, GET_PKT_LEN(p));
double curr_ts = p->ts.tv_sec + p->ts.tv_usec / 1000.0;
if (curr_ts < prev_signaled_ts || (curr_ts - prev_signaled_ts) > 60.0) {
prev_signaled_ts = curr_ts;
FlowWakeupFlowManagerThread();
}
/* update the engine time representation based on the timestamp
* of the packet. */
TimeSet(&p->ts);
/* call the decoder */
pcap_g.Decoder(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
#ifdef DEBUG
BUG_ON(p->pkt_src != PKT_SRC_WIRE && p->pkt_src != PKT_SRC_FFR_V2);
#endif
PacketDecodeFinalize(tv, dtv, p);
SCReturnInt(TM_ECODE_OK);
}
开发者ID:Erdeep，项目名称:suricata，代码行数:44，代码来源:source-pcap-file.c
示例12: AlertDebugLogDecoderEvent
TmEcode AlertDebugLogDecoderEvent(ThreadVars *tv, Packet *p, void *data, PacketQueue *pq, PacketQueue *postpq)
{
AlertDebugLogThread *aft = (AlertDebugLogThread *)data;
int i;
char timebuf[64];
if (p->alerts.cnt == 0)
return TM_ECODE_OK;
CreateTimeString(&p->ts, timebuf, sizeof(timebuf));
SCMutexLock(&aft->file_ctx->fp_mutex);
fprintf(aft->file_ctx->fp, "+================\n");
fprintf(aft->file_ctx->fp, "TIME: %s\n", timebuf);
if (p->pcap_cnt > 0) {
fprintf(aft->file_ctx->fp, "PCAP PKT NUM: %"PRIu64"\n", p->pcap_cnt);
}
fprintf(aft->file_ctx->fp, "ALERT CNT: %" PRIu32 "\n", p->alerts.cnt);
for (i = 0; i < p->alerts.cnt; i++) {
PacketAlert *pa = &p->alerts.alerts[i];
fprintf(aft->file_ctx->fp, "ALERT MSG [%02d]: %s\n", i, pa->msg);
fprintf(aft->file_ctx->fp, "ALERT GID [%02d]: %" PRIu32 "\n", i, pa->gid);
fprintf(aft->file_ctx->fp, "ALERT SID [%02d]: %" PRIu32 "\n", i, pa->sid);
fprintf(aft->file_ctx->fp, "ALERT REV [%02d]: %" PRIu32 "\n", i, pa->rev);
fprintf(aft->file_ctx->fp, "ALERT CLASS [%02d]: %s\n", i, pa->class_msg);
fprintf(aft->file_ctx->fp, "ALERT PRIO [%02d]: %" PRIu32 "\n", i, pa->prio);
}
aft->file_ctx->alerts += p->alerts.cnt;
fprintf(aft->file_ctx->fp, "PACKET LEN: %" PRIu32 "\n", GET_PKT_LEN(p));
fprintf(aft->file_ctx->fp, "PACKET:\n");
PrintRawDataFp(aft->file_ctx->fp, GET_PKT_DATA(p), GET_PKT_LEN(p));
fflush(aft->file_ctx->fp);
SCMutexUnlock(&aft->file_ctx->fp_mutex);
return TM_ECODE_OK;
}
开发者ID:58698301，项目名称:suricata，代码行数:42，代码来源:alert-debuglog.c
示例13: DecodeIPV6FragHeader
static inline
#endif
void DecodeIPV6FragHeader(Packet *p, uint8_t *pkt,
uint16_t hdrextlen, uint16_t plen,
uint16_t prev_hdrextlen)
{
uint16_t frag_offset = (*(pkt + 2) << 8 | *(pkt + 3)) & 0xFFF8;
int frag_morefrags = (*(pkt + 2) << 8 | *(pkt + 3)) & 0x0001;
p->ip6eh.fh_offset = frag_offset;
p->ip6eh.fh_more_frags_set = frag_morefrags ? TRUE : FALSE;
p->ip6eh.fh_nh = *pkt;
uint32_t fh_id;
memcpy(&fh_id, pkt+4, 4);
p->ip6eh.fh_id = SCNtohl(fh_id);
SCLogDebug("IPV6 FH: offset %u, mf %s, nh %u, id %u/%x",
p->ip6eh.fh_offset,
p->ip6eh.fh_more_frags_set ? "true" : "false",
p->ip6eh.fh_nh,
p->ip6eh.fh_id, p->ip6eh.fh_id);
// store header offset, data offset
uint16_t frag_hdr_offset = (uint16_t)(pkt - GET_PKT_DATA(p));
uint16_t data_offset = (uint16_t)(frag_hdr_offset + hdrextlen);
uint16_t data_len = plen - hdrextlen;
p->ip6eh.fh_header_offset = frag_hdr_offset;
p->ip6eh.fh_data_offset = data_offset;
p->ip6eh.fh_data_len = data_len;
/* if we have a prev hdr, store the type and offset of it */
if (prev_hdrextlen) {
p->ip6eh.fh_prev_hdr_offset = frag_hdr_offset - prev_hdrextlen;
}
SCLogDebug("IPV6 FH: frag_hdr_offset %u, data_offset %u, data_len %u",
p->ip6eh.fh_header_offset, p->ip6eh.fh_data_offset,
p->ip6eh.fh_data_len);
}
开发者ID:micsoftvn，项目名称:suricata，代码行数:41，代码来源:decode-ipv6.c
示例14: DecodeIP6inIP6
/**
* \brief Function to decode IPv4 in IPv6 packets
*
*/
static void DecodeIP6inIP6(ThreadVars *tv, DecodeThreadVars *dtv, Packet *p, uint8_t *pkt, uint16_t plen, PacketQueue *pq)
{
if (unlikely(plen < IPV6_HEADER_LEN)) {
ENGINE_SET_EVENT(p, IPV6_IN_IPV6_PKT_TOO_SMALL);
return;
}
if (IP_GET_RAW_VER(pkt) == 6) {
if (pq != NULL) {
Packet *tp = PacketPseudoPktSetup(p, pkt, plen, IPPROTO_IPV6);
if (tp != NULL) {
DecodeTunnel(tv, dtv, tp, GET_PKT_DATA(tp),
GET_PKT_LEN(tp), pq, IPPROTO_IP);
PacketEnqueue(pq,tp);
SCPerfCounterIncr(dtv->counter_ipv6inipv6, tv->sc_perf_pca);
return;
}
}
} else {
ENGINE_SET_EVENT(p, IPV6_IN_IPV6_WRONG_IP_VER);
}
return;
}
开发者ID:xrl，项目名称:suricata，代码行数:27，代码来源:decode-ipv6.c
示例15: DecodeIPV6RouteTest01
/**
* \test routing header decode
*/
static int DecodeIPV6RouteTest01 (void)
{
uint8_t raw_pkt1[] = {
0x60, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x2b, 0x40,
0x20, 0x01, 0xaa, 0xaa, 0x00, 0x01, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02,
0x20, 0x01, 0xaa, 0xaa, 0x00, 0x01, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0xb2, 0xed, 0x00, 0x50, 0x1b, 0xc7, 0x6a, 0xdf,
0x00, 0x00, 0x00, 0x00, 0x50, 0x02, 0x20, 0x00,
0xfa, 0x87, 0x00, 0x00,
};
Packet *p1 = PacketGetFromAlloc();
FAIL_IF(unlikely(p1 == NULL));
ThreadVars tv;
DecodeThreadVars dtv;
PacketQueue pq;
FlowInitConfig(FLOW_QUIET);
memset(&pq, 0, sizeof(PacketQueue));
memset(&tv, 0, sizeof(ThreadVars));
memset(&dtv, 0, sizeof(DecodeThreadVars));
PacketCopyData(p1, raw_pkt1, sizeof(raw_pkt1));
DecodeIPV6(&tv, &dtv, p1, GET_PKT_DATA(p1), GET_PKT_LEN(p1), &pq);
FAIL_IF (!(IPV6_EXTHDR_ISSET_RH(p1)));
FAIL_IF (p1->ip6eh.rh_type != 0);
PACKET_RECYCLE(p1);
SCFree(p1);
FlowShutdown();
PASS;
}
开发者ID:micsoftvn，项目名称:suricata，代码行数:40，代码来源:decode-ipv6.c
示例16: DecodeErfFile
/**
* \brief Decode the ERF file.
*
* This function ups the decoder counters and then passes the packet
* off to the ethernet decoder.
*/
TmEcode
DecodeErfFile(ThreadVars *tv, Packet *p, void *data, PacketQueue *pq, PacketQueue *postpq)
{
SCEnter();
DecodeThreadVars *dtv = (DecodeThreadVars *)data;
/* Update counters. */
SCPerfCounterIncr(dtv->counter_pkts, tv->sc_perf_pca);
// SCPerfCounterIncr(dtv->counter_pkts_per_sec, tv->sc_perf_pca);
SCPerfCounterAddUI64(dtv->counter_bytes, tv->sc_perf_pca, GET_PKT_LEN(p));
#if 0
SCPerfCounterAddDouble(dtv->counter_bytes_per_sec, tv->sc_perf_pca, GET_PKT_LEN(p));
SCPerfCounterAddDouble(dtv->counter_mbit_per_sec, tv->sc_perf_pca,
(GET_PKT_LEN(p) * 8)/1000000.0 );
#endif
SCPerfCounterAddUI64(dtv->counter_avg_pkt_size, tv->sc_perf_pca, GET_PKT_LEN(p));
SCPerfCounterSetUI64(dtv->counter_max_pkt_size, tv->sc_perf_pca, GET_PKT_LEN(p));
DecodeEthernet(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
SCReturnInt(TM_ECODE_OK);
}
开发者ID:ensonmj，项目名称:suricata，代码行数:30，代码来源:source-erf-file.c
示例17: DecodeErfDag
/**
* \brief This function passes off to link type decoders.
*
* DecodeErfDag reads packets from the PacketQueue and passes
* them off to the proper link type decoder.
*
* \param t pointer to ThreadVars
* \param p pointer to the current packet
* \param data pointer that gets cast into PcapThreadVars for ptv
* \param pq pointer to the current PacketQueue
*/
TmEcode DecodeErfDag(ThreadVars *tv, Packet *p, void *data, PacketQueue *pq,
PacketQueue *postpq)
{
SCEnter();
DecodeThreadVars *dtv = (DecodeThreadVars *)data;
/* update counters */
SCPerfCounterIncr(dtv->counter_pkts, tv->sc_perf_pca);
// SCPerfCounterIncr(dtv->counter_pkts_per_sec, tv->sc_perf_pca);
SCPerfCounterAddUI64(dtv->counter_bytes, tv->sc_perf_pca, GET_PKT_LEN(p));
#if 0
SCPerfCounterAddDouble(dtv->counter_bytes_per_sec, tv->sc_perf_pca, GET_PKT_LEN(p));
SCPerfCounterAddDouble(dtv->counter_mbit_per_sec, tv->sc_perf_pca,
(GET_PKT_LEN(p) * 8)/1000000.0);
#endif
SCPerfCounterAddUI64(dtv->counter_avg_pkt_size, tv->sc_perf_pca, GET_PKT_LEN(p));
SCPerfCounterSetUI64(dtv->counter_max_pkt_size, tv->sc_perf_pca, GET_PKT_LEN(p));
/* call the decoder */
switch(p->datalink) {
case LINKTYPE_ETHERNET:
DecodeEthernet(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
break;
default:
SCLogError(SC_ERR_DATALINK_UNIMPLEMENTED,
"Error: datalink type %" PRId32 " not yet supported in module DecodeErfDag",
p->datalink);
break;
}
PacketDecodeFinalize(tv, dtv, p);
SCReturnInt(TM_ECODE_OK);
}
开发者ID:jack-flemming，项目名称:suricata，代码行数:47，代码来源:source-erf-dag.c
示例18: NFQSetVerdict
/**
* \brief NFQ verdict function
*/
TmEcode NFQSetVerdict(Packet *p) {
int iter = 0;
int ret = 0;
uint32_t verdict = NF_ACCEPT;
/* we could also have a direct pointer but we need to have a ref counf in this case */
NFQQueueVars *t = nfq_q + p->nfq_v.nfq_index;
/** \todo add a test on validity of the entry NFQQueueVars could have been
* wipeout
*/
/* can't verdict a "fake" packet */
if (p->flags & PKT_PSEUDO_STREAM_END) {
return TM_ECODE_OK;
}
//printf("%p verdicting on queue %" PRIu32 "\n", t, t->queue_num);
NFQMutexLock(t);
if (t->qh == NULL) {
/* Somebody has started a clean-up, we leave */
NFQMutexUnlock(t);
return TM_ECODE_OK;
}
if (p->action & ACTION_DROP) {
verdict = NF_DROP;
#ifdef COUNTERS
t->dropped++;
#endif /* COUNTERS */
} else {
switch (nfq_config.mode) {
default:
case NFQ_ACCEPT_MODE:
verdict = NF_ACCEPT;
break;
case NFQ_REPEAT_MODE:
verdict = NF_REPEAT;
break;
case NFQ_ROUTE_MODE:
verdict = ((uint32_t) NF_QUEUE) | nfq_config.next_queue;
break;
}
if (p->flags & PKT_STREAM_MODIFIED) {
#ifdef COUNTERS
t->replaced++;
#endif /* COUNTERS */
}
#ifdef COUNTERS
t->accepted++;
#endif /* COUNTERS */
}
do {
switch (nfq_config.mode) {
default:
case NFQ_ACCEPT_MODE:
case NFQ_ROUTE_MODE:
if (p->flags & PKT_MARK_MODIFIED) {
#ifdef HAVE_NFQ_SET_VERDICT2
if (p->flags & PKT_STREAM_MODIFIED) {
ret = nfq_set_verdict2(t->qh, p->nfq_v.id, verdict,
p->nfq_v.mark,
GET_PKT_LEN(p), GET_PKT_DATA(p));
} else {
ret = nfq_set_verdict2(t->qh, p->nfq_v.id, verdict,
p->nfq_v.mark,
0, NULL);
}
#else /* fall back to old function */
if (p->flags & PKT_STREAM_MODIFIED) {
ret = nfq_set_verdict_mark(t->qh, p->nfq_v.id, verdict,
htonl(p->nfq_v.mark),
GET_PKT_LEN(p), GET_PKT_DATA(p));
} else {
ret = nfq_set_verdict_mark(t->qh, p->nfq_v.id, verdict,
htonl(p->nfq_v.mark),
0, NULL);
}
#endif /* HAVE_NFQ_SET_VERDICT2 */
} else {
if (p->flags & PKT_STREAM_MODIFIED) {
ret = nfq_set_verdict(t->qh, p->nfq_v.id, verdict,
GET_PKT_LEN(p), GET_PKT_DATA(p));
} else {
ret = nfq_set_verdict(t->qh, p->nfq_v.id, verdict, 0, NULL);
}
}
break;
case NFQ_REPEAT_MODE:
#ifdef HAVE_NFQ_SET_VERDICT2
if (p->flags & PKT_STREAM_MODIFIED) {
ret = nfq_set_verdict2(t->qh, p->nfq_v.id, verdict,
(nfq_config.mark & nfq_config.mask) | (p->nfq_v.mark & ~nfq_config.mask),
//.........这里部分代码省略.........
开发者ID:gcordrey，项目名称:suricata，代码行数:101，代码来源:source-nfq.c
示例19: PacketGetFromAlloc
/**
* \brief UTHBuildPacketReal is a function that create tcp/udp packets for unittests
* specifying ip and port sources and destinations
*
* \param payload pointer to the payloadd buffer
* \param payload_len pointer to the length of the payload
* \param ipproto Protocols allowed atm are IPPROTO_TCP and IPPROTO_UDP
* \param src pointer to a string containing the ip source
* \param dst pointer to a string containing the ip destination
* \param sport pointer to a string containing the port source
* \param dport pointer to a string containing the port destination
*
* \retval Packet pointer to the built in packet
*/
Packet *UTHBuildPacketReal(uint8_t *payload, uint16_t payload_len,
uint8_t ipproto, char *src, char *dst,
uint16_t sport, uint16_t dport)
{
struct in_addr in;
Packet *p = PacketGetFromAlloc();
if (unlikely(p == NULL))
return NULL;
struct timeval tv;
TimeGet(&tv);
COPY_TIMESTAMP(&tv, &p->ts);
p->src.family = AF_INET;
p->dst.family = AF_INET;
p->payload = payload;
p->payload_len = payload_len;
p->proto = ipproto;
if (inet_pton(AF_INET, src, &in) != 1)
goto error;
p->src.addr_data32[0] = in.s_addr;
p->sp = sport;
if (inet_pton(AF_INET, dst, &in) != 1)
goto error;
p->dst.addr_data32[0] = in.s_addr;
p->dp = dport;
p->ip4h = (IPV4Hdr *)GET_PKT_DATA(p);
if (p->ip4h == NULL)
goto error;
p->ip4h->s_ip_src.s_addr = p->src.addr_data32[0];
p->ip4h->s_ip_dst.s_addr = p->dst.addr_data32[0];
p->ip4h->ip_proto = ipproto;
p->ip4h->ip_verhl = sizeof(IPV4Hdr);
p->proto = ipproto;
int hdr_offset = sizeof(IPV4Hdr);
switch (ipproto) {
case IPPROTO_UDP:
p->udph = (UDPHdr *)(GET_PKT_DATA(p) + sizeof(IPV4Hdr));
if (p->udph == NULL)
goto error;
p->udph->uh_sport = sport;
p->udph->uh_dport = dport;
hdr_offset += sizeof(UDPHdr);
break;
case IPPROTO_TCP:
p->tcph = (TCPHdr *)(GET_PKT_DATA(p) + sizeof(IPV4Hdr));
if (p->tcph == NULL)
goto error;
p->tcph->th_sport = htons(sport);
p->tcph->th_dport = htons(dport);
hdr_offset += sizeof(TCPHdr);
break;
case IPPROTO_ICMP:
p->icmpv4h = (ICMPV4Hdr *)(GET_PKT_DATA(p) + sizeof(IPV4Hdr));
if (p->icmpv4h == NULL)
goto error;
hdr_offset += sizeof(ICMPV4Hdr);
break;
default:
break;
/* TODO: Add more protocols */
}
PacketCopyDataOffset(p, hdr_offset, payload, payload_len);
SET_PKT_LEN(p, hdr_offset + payload_len);
p->payload = GET_PKT_DATA(p)+hdr_offset;
return p;
error:
SCFree(p);
return NULL;
}
开发者ID:EmergingThreats，项目名称:suricata，代码行数:96，代码来源:util-unittest-helper.c
示例20: DecodeGRE
//.........这里部分代码省略.........
if (GREV1_FLAG_ISSET_FLAGS(p->greh)) {
ENGINE_SET_EVENT(p,GRE_VERSION1_FLAGS);
return;
}
if (GRE_GET_PROTO(p->greh) != GRE_PROTO_PPP) {
ENGINE_SET_EVENT(p,GRE_VERSION1_WRONG_PROTOCOL);
return;
}
if (!(GRE_FLAG_ISSET_KY(p->greh))) {
ENGINE_SET_EVENT(p,GRE_VERSION1_NO_KEY);
return;
}
header_len += GRE_KEY_LEN;
/* Adjust header length based on content */
if (GRE_FLAG_ISSET_SQ(p->greh))
header_len += GRE_SEQ_LEN;
if (GREV1_FLAG_ISSET_ACK(p->greh))
header_len += GREV1_ACK_LEN;
if (header_len > len) {
ENGINE_SET_EVENT(p,GRE_VERSION1_HDR_TOO_BIG);
return;
}
break;
default:
ENGINE_SET_EVENT(p,GRE_WRONG_VERSION);
return;
}
switch (GRE_GET_PROTO(p->greh))
{
case ETHERNET_TYPE_IP:
{
if (pq != NULL) {
Packet *tp = PacketPseudoPktSetup(p, pkt + header_len,
len - header_len, IPPROTO_IP);
if (tp != NULL) {
DecodeTunnel(tv, dtv, tp, GET_PKT_DATA(tp),
GET_PKT_LEN(tp), pq, IPPROTO_IP);
PacketEnqueue(pq,tp);
}
}
break;
}
case GRE_PROTO_PPP:
{
if (pq != NULL) {
Packet *tp = PacketPseudoPktSetup(p, pkt + header_len,
len - header_len, PPP_OVER_GRE);
if (tp != NULL) {
DecodeTunnel(tv, dtv, tp, GET_PKT_DATA(tp),
GET_PKT_LEN(tp), pq, PPP_OVER_GRE);
PacketEnqueue(pq,tp);
}
}
break;
}
case ETHERNET_TYPE_IPV6:
{
if (pq != NULL) {
Packet *tp = PacketPseudoPktSetup(p, pkt + header_len,
len - header_len, IPPROTO_IPV6);
if (tp != NULL) {
DecodeTunnel(tv, dtv, tp, GET_PKT_DATA(tp),
GET_PKT_LEN(tp), pq, IPPROTO_IPV6);
PacketEnqueue(pq,tp);
}
}
break;
}
case ETHERNET_TYPE_VLAN:
{
if (pq != NULL) {
Packet *tp = PacketPseudoPktSetup(p, pkt + header_len,
len - header_len, VLAN_OVER_GRE);
if (tp != NULL) {
DecodeTunnel(tv, dtv, tp, GET_PKT_DATA(tp),
GET_PKT_LEN(tp), pq, VLAN_OVER_GRE);
PacketEnqueue(pq,tp);
}
}
break;
}
default:
return;
}
}
开发者ID:jerryma119，项目名称:suricata，代码行数:101，代码来源:decode-gre.c
注：本文中的GET_PKT_DATA函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论