C++ GetControl函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中GetControl函数的典型用法代码示例。如果您正苦于以下问题：C++ GetControl函数的具体用法？C++ GetControl怎么用？C++ GetControl使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了GetControl函数的18个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: GetControl

void
DeviceEditWidget::SetConfig(const DeviceConfig &_config)
{
  config = _config;

  if (config.port_type == DeviceConfig::PortType::DISABLED)
    /* if the user configures a new device, forget the old "enabled"
       flag and re-enable the device */
    config.enabled = true;

  WndProperty &port_control = GetControl(Port);
  DataFieldEnum &port_df = *(DataFieldEnum *)port_control.GetDataField();
  SetPort(port_df, config);
  port_control.RefreshDisplay();

  WndProperty &baud_control = GetControl(BaudRate);
  DataFieldEnum &baud_df = *(DataFieldEnum *)baud_control.GetDataField();
  baud_df.Set(config.baud_rate);
  baud_control.RefreshDisplay();

  WndProperty &bulk_baud_control = GetControl(BulkBaudRate);
  DataFieldEnum &bulk_baud_df = *(DataFieldEnum *)
    bulk_baud_control.GetDataField();
  bulk_baud_df.Set(config.bulk_baud_rate);
  bulk_baud_control.RefreshDisplay();

  WndProperty &ip_address_control = GetControl(IP_ADDRESS);
  DataFieldEnum &ip_address_df = *(DataFieldEnum *)
    ip_address_control.GetDataField();
  ip_address_df.Set(config.ip_address);
  ip_address_control.RefreshDisplay();

  WndProperty &tcp_port_control = GetControl(TCPPort);
  DataFieldEnum &tcp_port_df = *(DataFieldEnum *)
    tcp_port_control.GetDataField();
  tcp_port_df.Set(config.tcp_port);
  tcp_port_control.RefreshDisplay();

  WndProperty &i2c_bus_control = GetControl(I2CBus);
  DataFieldEnum &i2c_bus_df = *(DataFieldEnum *)
    i2c_bus_control.GetDataField();
  i2c_bus_df.Set(config.i2c_bus);
  i2c_bus_control.RefreshDisplay();

  WndProperty &i2c_addr_control = GetControl(I2CAddr);
  DataFieldEnum &i2c_addr_df = *(DataFieldEnum *)
    i2c_addr_control.GetDataField();
  i2c_addr_df.Set(config.i2c_addr);
  i2c_addr_control.RefreshDisplay();

  WndProperty &press_control = GetControl(PressureUsage);
  DataFieldEnum &press_df = *(DataFieldEnum *)
    press_control.GetDataField();
  press_df.Set((unsigned)config.press_use);
  press_control.RefreshDisplay();

  WndProperty &driver_control = GetControl(Driver);
  DataFieldEnum &driver_df = *(DataFieldEnum *)driver_control.GetDataField();
  driver_df.Set(config.driver_name);
  driver_control.RefreshDisplay();

  WndProperty &sync_from_control = GetControl(SyncFromDevice);
  DataFieldBoolean &sync_from_df =
      *(DataFieldBoolean *)sync_from_control.GetDataField();
  sync_from_df.Set(config.sync_from_device);
  sync_from_control.RefreshDisplay();

  WndProperty &sync_to_control = GetControl(SyncToDevice);
  DataFieldBoolean &sync_to_df =
      *(DataFieldBoolean *)sync_to_control.GetDataField();
  sync_to_df.Set(config.sync_to_device);
  sync_to_control.RefreshDisplay();

  WndProperty &k6bt_control = GetControl(K6Bt);
  DataFieldBoolean &k6bt_df =
      *(DataFieldBoolean *)k6bt_control.GetDataField();
  k6bt_df.Set(config.k6bt);
  k6bt_control.RefreshDisplay();

  UpdateVisibilities();
}

开发者ID:Adrien81，项目名称:XCSoar，代码行数:81，代码来源:DeviceEditWidget.cpp

示例2: GetControl

void* Interface_GUIWindow::get_control_spin(void* kodiBase, void* handle, int control_id)
{
  return GetControl(kodiBase, handle, control_id, __FUNCTION__, CGUIControl::GUICONTROL_SPINEX, "spin");
}

开发者ID:totesmuhgoats，项目名称:xbmc，代码行数:4，代码来源:Window.cpp

示例3: switch

bool CGUIDialogKeyboardGeneric::OnMessage(CGUIMessage& message)
{
  switch ( message.GetMessage() )
  {
  case GUI_MSG_CLICKED:
    {
      int iControl = message.GetSenderId();

      switch (iControl)
      {
      case CTL_BUTTON_DONE:
        OnOK();
        break;
      case CTL_BUTTON_CANCEL:
        Close();
        break;
      case CTL_BUTTON_SHIFT:
        OnShift();
        break;
      case CTL_BUTTON_CAPS:
        if (m_keyType == LOWER)
          m_keyType = CAPS;
        else if (m_keyType == CAPS)
          m_keyType = LOWER;
        UpdateButtons();
        break;
      case CTL_BUTTON_LAYOUT:
        OnLayout();
        break;
      case CTL_BUTTON_SYMBOLS:
        OnSymbols();
        break;
      case CTL_BUTTON_LEFT:
        MoveCursor( -1);
        break;
      case CTL_BUTTON_RIGHT:
        MoveCursor(1);
        break;
      case CTL_BUTTON_IP_ADDRESS:
        OnIPAddress();
        break;
      case CTL_BUTTON_CLEAR:
        SetEditText("");
        break;
      case CTL_EDIT:
      {
        CGUIMessage msg(GUI_MSG_ITEM_SELECTED, GetID(), CTL_EDIT);
        OnMessage(msg);
        // update callback I guess?
        if (m_pCharCallback)
        { // we did _something_, so make sure our search message filter is reset
          m_pCharCallback(this, msg.GetLabel());
        }
        m_text = msg.GetLabel();
        return true;
      }
      default:
        OnClickButton(iControl);
        break;
      }
    }
    break;

  case GUI_MSG_SET_TEXT:
  case GUI_MSG_INPUT_TEXT_EDIT:
    {
      // the edit control only handles these messages if it is either focues
      // or its specific control ID is set in the message. As neither is the
      // case here (focus is on one of the keyboard buttons) we have to force
      // the control ID of the message to the control ID of the edit control
      // (unfortunately we have to create a whole copy of the message object for that)
      CGUIMessage messageCopy(message.GetMessage(), message.GetSenderId(), CTL_EDIT, message.GetParam1(), message.GetParam2(), message.GetItem());
      messageCopy.SetLabel(message.GetLabel());

      // ensure this goes to the edit control
      CGUIControl *edit = GetControl(CTL_EDIT);
      if (edit)
        edit->OnMessage(messageCopy);

      // close the dialog if requested
      if (message.GetMessage() == GUI_MSG_SET_TEXT && message.GetParam1() > 0)
        OnOK();
      return true;
    }
  }

  return CGUIDialog::OnMessage(message);
}

开发者ID:Distrotech，项目名称:xbmc，代码行数:88，代码来源:GUIDialogKeyboardGeneric.cpp

示例4: GetControl

void CGUIWindowSettingsScreenCalibration::UpdateFromControl(int iControl)
{
  std::string strStatus;
  RESOLUTION_INFO info = g_graphicsContext.GetResInfo(m_Res[m_iCurRes]);

  if (iControl == CONTROL_PIXEL_RATIO)
  {
    CGUIControl *pControl = GetControl(CONTROL_PIXEL_RATIO);
    if (pControl)
    {
      float fWidth = (float)pControl->GetWidth();
      float fHeight = (float)pControl->GetHeight();
      info.fPixelRatio = fHeight / fWidth;
      // recenter our control...
      pControl->SetPosition((info.iWidth - pControl->GetWidth()) / 2,
                            (info.iHeight - pControl->GetHeight()) / 2);
      strStatus = StringUtils::Format("%s (%5.3f)", g_localizeStrings.Get(275).c_str(), info.fPixelRatio);
      SET_CONTROL_LABEL(CONTROL_LABEL_ROW2, 278);
    }
  }
  else
  {
    const CGUIMoverControl *pControl = dynamic_cast<const CGUIMoverControl*>(GetControl(iControl));
    if (pControl)
    {
      switch (iControl)
      {
      case CONTROL_TOP_LEFT:
        {
          info.Overscan.left = pControl->GetXLocation();
          info.Overscan.top = pControl->GetYLocation();
          strStatus = StringUtils::Format("%s (%i,%i)", g_localizeStrings.Get(272).c_str(), pControl->GetXLocation(), pControl->GetYLocation());
          SET_CONTROL_LABEL(CONTROL_LABEL_ROW2, 276);
        }
        break;

      case CONTROL_BOTTOM_RIGHT:
        {
          info.Overscan.right = pControl->GetXLocation();
          info.Overscan.bottom = pControl->GetYLocation();
          int iXOff1 = info.iWidth - pControl->GetXLocation();
          int iYOff1 = info.iHeight - pControl->GetYLocation();
          strStatus = StringUtils::Format("%s (%i,%i)", g_localizeStrings.Get(273).c_str(), iXOff1, iYOff1);
          SET_CONTROL_LABEL(CONTROL_LABEL_ROW2, 276);
        }
        break;

      case CONTROL_SUBTITLES:
        {
          info.iSubtitles = pControl->GetYLocation();
          strStatus = StringUtils::Format("%s (%i)", g_localizeStrings.Get(274).c_str(), pControl->GetYLocation());
          SET_CONTROL_LABEL(CONTROL_LABEL_ROW2, 277);
        }
        break;
      }
    }
  }

  g_graphicsContext.SetResInfo(m_Res[m_iCurRes], info);

  // set the label control correctly
  std::string strText;
  if (g_Windowing.IsFullScreen())
    strText = StringUtils::Format("%ix%[email protected]%.2f - %s | %s",
                                  info.iScreenWidth,
                                  info.iScreenHeight,
                                  info.fRefreshRate,
                                  g_localizeStrings.Get(244).c_str(),
                                  strStatus.c_str());
  else
    strText = StringUtils::Format("%ix%i - %s | %s",
                                  info.iScreenWidth,
                                  info.iScreenHeight,
                                  g_localizeStrings.Get(242).c_str(),
                                  strStatus.c_str());

  SET_CONTROL_LABEL(CONTROL_LABEL_ROW1, strText);
}

开发者ID:EsMaSol，项目名称:xbmc，代码行数:78，代码来源:GUIWindowSettingsScreenCalibration.cpp

示例5: GetWindow

void
RowFormWidget::UpdateLayout()
{
  PixelRect current_rect = GetWindow()->GetClientRect();
  const unsigned total_width = current_rect.right - current_rect.left;
  const unsigned total_height = current_rect.bottom - current_rect.top;
  current_rect.bottom = current_rect.top;

  const bool expert = UIGlobals::GetDialogSettings().expert;

  /* first row traversal: count the number of "elastic" rows and
     determine the minimum total height */
  unsigned min_height = 0;
  unsigned n_elastic = 0;
  unsigned caption_width = 0;
  for (auto i = rows.begin(), end = rows.end(); i != end; ++i) {
    if (!i->available || (i->expert && !expert))
      continue;

    min_height += i->GetMinimumHeight();
    if (i->IsElastic())
      ++n_elastic;

    if (i->type == Row::Type::EDIT) {
      unsigned cw = i->GetControl().GetRecommendedCaptionWidth();
      if (cw > caption_width)
        caption_width = cw;
    }
  }

  if (caption_width * 3 > total_width * 2)
    caption_width = total_width * 2 / 3;

  /* how much excess height in addition to the minimum height? */
  unsigned excess_height = min_height < total_height
    ? total_height - min_height
    : 0;

  /* second row traversal: now move and resize the rows */
  for (auto i = rows.begin(), end = rows.end(); i != end; ++i) {
    if (i->type == Row::Type::DUMMY)
      continue;

    Window &window = i->GetWindow();

    if (!i->available) {
      window.Hide();
      continue;
    }

    if (i->expert) {
      if (!expert) {
        window.Hide();
        continue;
      }

      if (i->visible)
        window.Show();
    }

    if (caption_width > 0 && i->type == Row::Type::EDIT &&
        i->GetControl().HasCaption())
      i->GetControl().SetCaptionWidth(caption_width);

    /* determine this row's height */
    UPixelScalar height = i->GetMinimumHeight();
    if (excess_height > 0 && i->IsElastic()) {
      assert(n_elastic > 0);

      /* distribute excess height among all elastic rows */
      unsigned grow_height = excess_height / n_elastic;
      if (grow_height > 0) {
        height += grow_height;
        const UPixelScalar max_height = i->GetMaximumHeight();
        if (height > max_height) {
          /* never grow beyond declared maximum height */
          height = max_height;
          grow_height = max_height - height;
        }

        excess_height -= grow_height;
      }

      --n_elastic;
    }

    /* finally move and resize */
    NextControlRect(current_rect, height);
    window.Move(current_rect);
  }

  assert(excess_height == 0 || n_elastic == 0);
}

开发者ID:damianob，项目名称:xcsoar，代码行数:93，代码来源:RowFormWidget.cpp

示例6: CGUIButtonControl

void CGUIDialogContextMenu::SetupButtons()
{
  if (!m_buttons.size())
    return;

  // disable the template button control
  CGUIButtonControl *pButtonTemplate = dynamic_cast<CGUIButtonControl *>(GetFirstFocusableControl(BUTTON_TEMPLATE));
  if (!pButtonTemplate)
    pButtonTemplate = dynamic_cast<CGUIButtonControl *>(GetControl(BUTTON_TEMPLATE));
  if (!pButtonTemplate)
    return;
  pButtonTemplate->SetVisible(false);

  CGUIControlGroupList* pGroupList = dynamic_cast<CGUIControlGroupList *>(GetControl(GROUP_LIST));

  // add our buttons
  for (unsigned int i = 0; i < m_buttons.size(); i++)
  {
    CGUIButtonControl *pButton = new CGUIButtonControl(*pButtonTemplate);
    if (pButton)
    { // set the button's ID and position
      int id = BUTTON_START + i;
      pButton->SetID(id);
      pButton->SetVisible(true);
      pButton->SetLabel(m_buttons[i].second);
      if (pGroupList)
      {
        pButton->SetPosition(pButtonTemplate->GetXPosition(), pButtonTemplate->GetYPosition());
        // try inserting context buttons at position specified by template
        // button, if template button is not in grouplist fallback to adding
        // new buttons at the end of grouplist
        if (!pGroupList->InsertControl(pButton, pButtonTemplate))
          pGroupList->AddControl(pButton);
      }
    }
  }

  // fix up background images placement and size
  CGUIControl *pControl = GetControl(BACKGROUND_IMAGE);
  if (pControl)
  {
    // first set size of background image
    if (pGroupList)
    {
      if (pGroupList->GetOrientation() == VERTICAL)
      {
        // keep gap between bottom edges of grouplist and background image
        pControl->SetHeight(m_backgroundImageSize - pGroupList->Size() + pGroupList->GetHeight());
      }
      else
      {
        // keep gap between right edges of grouplist and background image
        pControl->SetWidth(m_backgroundImageSize - pGroupList->Size() + pGroupList->GetWidth());
      }
    }
  }

  // update our default control
  if (pGroupList)
    m_defaultControl = pGroupList->GetID();
}

开发者ID:idekker，项目名称:xbmc，代码行数:61，代码来源:GUIDialogContextMenu.cpp

示例7: GetControl

void CXTPReportColumn::EnsureVisible()
{
	CXTPReportControl* pControl = GetControl();
	if (pControl)
		pControl->EnsureVisible(this);
}

开发者ID:killbug2004，项目名称:ghost2013，代码行数:6，代码来源:XTPReportColumn.cpp

示例8: ASSERT

FX_BOOL CPDF_FormField::CheckControl(int iControlIndex,
                                     bool bChecked,
                                     bool bNotify) {
  ASSERT(GetType() == CheckBox || GetType() == RadioButton);
  CPDF_FormControl* pControl = GetControl(iControlIndex);
  if (!pControl) {
    return FALSE;
  }
  if (!bChecked && pControl->IsChecked() == bChecked) {
    return FALSE;
  }
  CFX_WideString csWExport = pControl->GetExportValue();
  CFX_ByteString csBExport = PDF_EncodeText(csWExport);
  int iCount = CountControls();
  FX_BOOL bUnison = PDF_FormField_IsUnison(this);
  for (int i = 0; i < iCount; i++) {
    CPDF_FormControl* pCtrl = GetControl(i);
    if (bUnison) {
      CFX_WideString csEValue = pCtrl->GetExportValue();
      if (csEValue == csWExport) {
        if (pCtrl->GetOnStateName() == pControl->GetOnStateName()) {
          pCtrl->CheckControl(bChecked);
        } else if (bChecked) {
          pCtrl->CheckControl(FALSE);
        }
      } else if (bChecked) {
        pCtrl->CheckControl(FALSE);
      }
    } else {
      if (i == iControlIndex) {
        pCtrl->CheckControl(bChecked);
      } else if (bChecked) {
        pCtrl->CheckControl(FALSE);
      }
    }
  }
  CPDF_Object* pOpt = FPDF_GetFieldAttr(m_pDict, "Opt");
  if (!ToArray(pOpt)) {
    if (bChecked) {
      m_pDict->SetAtName("V", csBExport);
    } else {
      CFX_ByteString csV;
      CPDF_Object* pV = FPDF_GetFieldAttr(m_pDict, "V");
      if (pV) {
        csV = pV->GetString();
      }
      if (csV == csBExport) {
        m_pDict->SetAtName("V", "Off");
      }
    }
  } else if (bChecked) {
    CFX_ByteString csIndex;
    csIndex.Format("%d", iControlIndex);
    m_pDict->SetAtName("V", csIndex);
  }
  if (bNotify && m_pForm->m_pFormNotify) {
    m_pForm->m_pFormNotify->AfterCheckedStatusChange(this);
  }
  m_pForm->m_bUpdated = TRUE;
  return TRUE;
}

开发者ID:andoma，项目名称:pdfium，代码行数:61，代码来源:doc_formfield.cpp

示例9: switch

FX_BOOL CPDF_FormField::ResetField(FX_BOOL bNotify) {
  switch (m_Type) {
    case CPDF_FormField::CheckBox:
    case CPDF_FormField::RadioButton: {
      int iCount = CountControls();
      if (iCount) {
        if (PDF_FormField_IsUnison(this)) {
          for (int i = 0; i < iCount; i++) {
            CheckControl(i, GetControl(i)->IsDefaultChecked(), FALSE);
          }
        } else {
          for (int i = 0; i < iCount; i++) {
            CPDF_FormControl* pControl = GetControl(i);
            FX_BOOL bChecked = pControl->IsDefaultChecked();
            CheckControl(i, bChecked, FALSE);
          }
        }
      }
      if (bNotify && m_pForm->m_pFormNotify) {
        m_pForm->m_pFormNotify->AfterCheckedStatusChange(this);
      }
    } break;
    case CPDF_FormField::ComboBox: {
      CFX_WideString csValue;
      ClearSelection();
      int iIndex = GetDefaultSelectedItem();
      if (iIndex >= 0) {
        csValue = GetOptionLabel(iIndex);
      }
      if (bNotify && m_pForm->m_pFormNotify) {
        int iRet = m_pForm->m_pFormNotify->BeforeValueChange(this, csValue);
        if (iRet < 0) {
          return FALSE;
        }
      }
      SetItemSelection(iIndex, TRUE);
      if (bNotify && m_pForm->m_pFormNotify) {
        m_pForm->m_pFormNotify->AfterValueChange(this);
      }
    } break;
    case CPDF_FormField::ListBox: {
      CFX_WideString csValue;
      ClearSelection();
      int iIndex = GetDefaultSelectedItem();
      if (iIndex >= 0) {
        csValue = GetOptionLabel(iIndex);
      }
      if (bNotify && m_pForm->m_pFormNotify) {
        int iRet = m_pForm->m_pFormNotify->BeforeSelectionChange(this, csValue);
        if (iRet < 0) {
          return FALSE;
        }
      }
      SetItemSelection(iIndex, TRUE);
      if (bNotify && m_pForm->m_pFormNotify) {
        m_pForm->m_pFormNotify->AfterSelectionChange(this);
      }
    } break;
    case CPDF_FormField::Text:
    case CPDF_FormField::RichText:
    case CPDF_FormField::File:
    default: {
      CPDF_Object* pDV = FPDF_GetFieldAttr(m_pDict, "DV");
      CFX_WideString csDValue;
      if (pDV) {
        csDValue = pDV->GetUnicodeText();
      }
      CPDF_Object* pV = FPDF_GetFieldAttr(m_pDict, "V");
      CFX_WideString csValue;
      if (pV) {
        csValue = pV->GetUnicodeText();
      }
      CPDF_Object* pRV = FPDF_GetFieldAttr(m_pDict, "RV");
      if (!pRV && (csDValue == csValue)) {
        return FALSE;
      }
      if (bNotify && m_pForm->m_pFormNotify) {
        int iRet = m_pForm->m_pFormNotify->BeforeValueChange(this, csDValue);
        if (iRet < 0) {
          return FALSE;
        }
      }
      if (pDV) {
        CPDF_Object* pClone = pDV->Clone();
        if (!pClone) {
          return FALSE;
        }
        m_pDict->SetAt("V", pClone);
        if (pRV) {
          CPDF_Object* pCloneR = pDV->Clone();
          m_pDict->SetAt("RV", pCloneR);
        }
      } else {
        m_pDict->RemoveAt("V");
        m_pDict->RemoveAt("RV");
      }
      if (bNotify && m_pForm->m_pFormNotify) {
        m_pForm->m_pFormNotify->AfterValueChange(this);
      }
      m_pForm->m_bUpdated = TRUE;
//.........这里部分代码省略.........

开发者ID:andoma，项目名称:pdfium，代码行数:101，代码来源:doc_formfield.cpp

示例10: switch

bool CGUIDialogKeyboardGeneric::OnMessage(CGUIMessage& message)
{
  switch ( message.GetMessage() )
  {
  case GUI_MSG_CLICKED:
    {
      int iControl = message.GetSenderId();

      switch (iControl)
      {
      case CTL_BUTTON_DONE:
        OnOK();
        break;
      case CTL_BUTTON_CANCEL:
        Close();
        break;
      case CTL_BUTTON_SHIFT:
        OnShift();
        break;
      case CTL_BUTTON_CAPS:
        if (m_keyType == LOWER)
          m_keyType = CAPS;
        else if (m_keyType == CAPS)
          m_keyType = LOWER;
        UpdateButtons();
        break;
      case CTL_BUTTON_SYMBOLS:
        OnSymbols();
        break;
      case CTL_BUTTON_LEFT:
        MoveCursor( -1);
        break;
      case CTL_BUTTON_RIGHT:
        MoveCursor(1);
        break;
      case CTL_BUTTON_IP_ADDRESS:
        OnIPAddress();
        break;
      case CTL_BUTTON_CLEAR:
        SetEditText("");
        break;
      case CTL_EDIT:
      {
        CGUIMessage msg(GUI_MSG_ITEM_SELECTED, GetID(), CTL_EDIT);
        OnMessage(msg);
        // update callback I guess?
        if (m_pCharCallback)
        { // we did _something_, so make sure our search message filter is reset
          m_pCharCallback(this, msg.GetLabel());
        }
        m_text = msg.GetLabel();
        return true;
      }
      default:
        OnClickButton(iControl);
        break;
      }
    }
    break;

  case GUI_MSG_SET_TEXT:
  case GUI_MSG_INPUT_TEXT:
  case GUI_MSG_INPUT_TEXT_EDIT:
    {
      // ensure this goes to the edit control
      CGUIControl *edit = GetControl(CTL_EDIT);
      if (edit)
        edit->OnMessage(message);

      // close the dialog if requested
      if (message.GetMessage() == GUI_MSG_SET_TEXT && message.GetParam1() > 0)
        OnOK();
      return true;
    }
  }

  return CGUIDialog::OnMessage(message);
}

开发者ID:cg110，项目名称:xbmc，代码行数:78，代码来源:GUIDialogKeyboardGeneric.cpp

示例11: switch

FX_BOOL CPDF_FormField::ResetField(FX_BOOL bNotify) {
  switch (m_Type) {
    case CPDF_FormField::CheckBox:
    case CPDF_FormField::RadioButton: {
      int iCount = CountControls();
      if (iCount) {
        // TODO(weili): Check whether anything special needs to be done for
        // unison field. Otherwise, merge these branches.
        if (PDF_FormField_IsUnison(this)) {
          for (int i = 0; i < iCount; i++) {
            CheckControl(i, GetControl(i)->IsDefaultChecked(), FALSE);
          }
        } else {
          for (int i = 0; i < iCount; i++) {
            CheckControl(i, GetControl(i)->IsDefaultChecked(), FALSE);
          }
        }
      }
      if (bNotify && m_pForm->m_pFormNotify) {
        m_pForm->m_pFormNotify->AfterCheckedStatusChange(this);
      }
    } break;
    case CPDF_FormField::ComboBox:
    case CPDF_FormField::ListBox: {
      CFX_WideString csValue;
      ClearSelection();
      int iIndex = GetDefaultSelectedItem();
      if (iIndex >= 0)
        csValue = GetOptionLabel(iIndex);

      if (bNotify && !NotifyListOrComboBoxBeforeChange(csValue))
        return FALSE;

      SetItemSelection(iIndex, TRUE);
      if (bNotify)
        NotifyListOrComboBoxAfterChange();
    } break;
    case CPDF_FormField::Text:
    case CPDF_FormField::RichText:
    case CPDF_FormField::File:
    default: {
      CPDF_Object* pDV = FPDF_GetFieldAttr(m_pDict, "DV");
      CFX_WideString csDValue;
      if (pDV)
        csDValue = pDV->GetUnicodeText();

      CPDF_Object* pV = FPDF_GetFieldAttr(m_pDict, "V");
      CFX_WideString csValue;
      if (pV)
        csValue = pV->GetUnicodeText();

      CPDF_Object* pRV = FPDF_GetFieldAttr(m_pDict, "RV");
      if (!pRV && (csDValue == csValue))
        return FALSE;

      if (bNotify && !NotifyBeforeValueChange(csDValue))
        return FALSE;

      if (pDV) {
        CPDF_Object* pClone = pDV->Clone();
        if (!pClone)
          return FALSE;

        m_pDict->SetAt("V", pClone);
        if (pRV) {
          CPDF_Object* pCloneR = pDV->Clone();
          m_pDict->SetAt("RV", pCloneR);
        }
      } else {
        m_pDict->RemoveAt("V");
        m_pDict->RemoveAt("RV");
      }
      if (bNotify)
        NotifyAfterValueChange();
    } break;
  }
  return TRUE;
}

开发者ID:endlessm，项目名称:chromium-browser，代码行数:78，代码来源:doc_formfield.cpp

示例12: InitializeState

Eigen::VectorXi TvlqrControl::GetControl(const mav_pose_t *msg) {

    if (current_trajectory_ == NULL) {
        cerr << "Warning: NULL trajectory in GetControl." << endl;
        return converter_->GetTrimCommands();
    }

    //std::cout << "in GetControl" << std::endl;

    // check to see if this is the first state we've gotten along this trajectory

    if (state_initialized_ == false) {

        InitializeState(msg);
    }

    Eigen::VectorXd state_minus_init = GetStateMinusInit(msg);
/*
    printf("BEFORE\troll: %f\tpitch: %f\tyaw: %f\n", state_minus_init(3), state_minus_init(4), state_minus_init(5));

    // unwrap angles
    state_minus_init(3) = AngleUnwrap(state_minus_init(3), last_state_(3));
    state_minus_init(4) = AngleUnwrap(state_minus_init(4), last_state_(4));
    state_minus_init(5) = AngleUnwrap(state_minus_init(5), last_state_(5));

    printf("AFTER\troll: %f\tpitch: %f\tyaw: %f\n", state_minus_init(3), state_minus_init(4), state_minus_init(5));

    last_state_ = state_minus_init;
*/
    double t_along_trajectory;

    // check for TILQR case
    if (current_trajectory_->IsTimeInvariant()) {
        t_along_trajectory = 0;
    } else {
        t_along_trajectory = GetTNow();
    }

    if (t_along_trajectory <= current_trajectory_->GetMaxTime()) {

        Eigen::VectorXd x0 = current_trajectory_->GetState(t_along_trajectory);
        Eigen::MatrixXd gain_matrix = current_trajectory_->GetGainMatrix(t_along_trajectory);

        Eigen::VectorXd state_error = state_minus_init - x0;

        //cout << "state error = " << endl << state_error << endl;

        Eigen::VectorXd additional_control_action = gain_matrix * state_error;

        //cout << "additional control action = " << endl << additional_control_action << endl;

//cout << "t = " << t_along_trajectory << endl;
//cout << "gain" << endl << gain_matrix << endl << "state_error" << endl << state_error << endl << "additional" << endl << additional_control_action << endl;

        Eigen::VectorXd command_in_rad = current_trajectory_->GetUCommand(t_along_trajectory) + additional_control_action;

//cout << "command_in_rad" << endl << command_in_rad << endl;

        return converter_->RadiansToServoCommands(command_in_rad);
    } else {
        // we are past the max time, return stabilizing controller
        SetTrajectory(stable_controller_);
        return GetControl(msg);

        //return converter_->GetTrimCommands();

    }
}

开发者ID:fengmushu，项目名称:flight，代码行数:68，代码来源:TvlqrControl.cpp

示例13: SaveValue

bool
InterfaceConfigPanel::Save(bool &_changed)
{
  UISettings &settings = CommonInterface::SetUISettings();
  bool changed = false;;

#ifdef HAVE_BLANK
  changed |= SaveValue(AutoBlank, ProfileKeys::AutoBlank,
                       settings.display.enable_auto_blank);
#endif

  if (SaveValueFileReader(InputFile, ProfileKeys::InputFile))
    require_restart = changed = true;

#ifndef HAVE_NATIVE_GETTEXT
  WndProperty *wp = (WndProperty *)&GetControl(LanguageFile);
  if (wp != NULL) {
    DataFieldEnum &df = *(DataFieldEnum *)wp->GetDataField();

    TCHAR old_value[MAX_PATH];
    if (!Profile::GetPath(ProfileKeys::LanguageFile, old_value))
      old_value[0] = _T('\0');

    const TCHAR *old_base = BaseName(old_value);
    if (old_base == NULL)
      old_base = old_value;

    TCHAR buffer[MAX_PATH];
    const TCHAR *new_value, *new_base;

    switch (df.GetValue()) {
    case 0:
      new_value = new_base = _T("auto");
      break;

    case 1:
      new_value = new_base = _T("none");
      break;

    default:
      _tcscpy(buffer, df.GetAsString());
      ContractLocalPath(buffer);
      new_value = buffer;
      new_base = BaseName(new_value);
      if (new_base == NULL)
        new_base = new_value;
      break;
    }

    if (_tcscmp(old_value, new_value) != 0 &&
        _tcscmp(old_base, new_base) != 0) {
      Profile::Set(ProfileKeys::LanguageFile, new_value);
      LanguageChanged = changed = true;
    }
  }
#endif

  if (SaveValueFileReader(StatusFile, ProfileKeys::StatusFile))
    require_restart = changed = true;

  unsigned menu_timeout = GetValueInteger(MenuTimeout) * 2;
  if (settings.menu_timeout != menu_timeout) {
    settings.menu_timeout = menu_timeout;
    Profile::Set(ProfileKeys::MenuTimeout, menu_timeout);
    changed = true;
  }

#ifdef HAVE_VIBRATOR
  changed |= SaveValueEnum(HapticFeedback, ProfileKeys::HapticFeedback, settings.haptic_feedback);
#endif

  _changed |= changed;
  return true;
}

开发者ID:MindMil，项目名称:XCSoar，代码行数:74，代码来源:InterfaceConfigPanel.cpp

示例14: InternalHandleMessage

BOOL CEventPropertiesFireTriggerDialog::HandleMessage( HWND hwndDlg, UINT uMsg, WPARAM wParam, LPARAM lParam )
{
	m_hDialog = hwndDlg;

	bool handled = false;
	BOOL bret = InternalHandleMessage( &g_Params, hwndDlg, uMsg, wParam, lParam, handled );
	if ( handled )
		return bret;

	switch(uMsg)
	{
	case WM_PAINT:
		{
			PAINTSTRUCT ps; 
			HDC hdc;
			
            hdc = BeginPaint(hwndDlg, &ps); 
			DrawSpline( hdc, GetControl( IDC_STATIC_SPLINE ), g_Params.m_pEvent );
            EndPaint(hwndDlg, &ps); 

            return FALSE; 
		}
		break;
	case WM_VSCROLL:
		{
			RECT rcOut;
			GetSplineRect( GetControl( IDC_STATIC_SPLINE ), rcOut );

			InvalidateRect( hwndDlg, &rcOut, TRUE );
			UpdateWindow( hwndDlg );
			return FALSE;
		}
		break;
    case WM_INITDIALOG:
		{
			InitDialog( hwndDlg );
		}
		return FALSE;  
		
    case WM_COMMAND:
		switch (LOWORD(wParam))
		{
		case IDOK:
			{
				HWND control = GetControl( IDC_EVENTCHOICES );
				if ( control )
				{
					SendMessage( control, WM_GETTEXT, (WPARAM)sizeof( g_Params.m_szParameters ), (LPARAM)g_Params.m_szParameters );
				}
				GetDlgItemText( m_hDialog, IDC_EVENTNAME, g_Params.m_szName, sizeof( g_Params.m_szName ) );

				if ( !g_Params.m_szName[ 0 ] )
				{
					Q_snprintf( g_Params.m_szName, sizeof( g_Params.m_szName ), "Firetrigger %s", g_Params.m_szParameters );
				}

				char szTime[ 32 ];
				GetDlgItemText( m_hDialog, IDC_STARTTIME, szTime, sizeof( szTime ) );
				g_Params.m_flStartTime = atof( szTime );
				GetDlgItemText( m_hDialog, IDC_ENDTIME, szTime, sizeof( szTime ) );
				g_Params.m_flEndTime = atof( szTime );

				// Parse tokens from tags
				ParseTags( &g_Params );

				EndDialog( hwndDlg, 1 );
			}
			break;
        case IDCANCEL:
			EndDialog( hwndDlg, 0 );
			break;
		case IDC_CHECK_ENDTIME:
			{
				g_Params.m_bHasEndTime = SendMessage( GetControl( IDC_CHECK_ENDTIME ), BM_GETCHECK, 0, 0 ) == BST_CHECKED ? true : false;
				if ( !g_Params.m_bHasEndTime )
				{
					ShowWindow( GetControl( IDC_ENDTIME ), SW_HIDE );
				}
				else
				{
					ShowWindow( GetControl( IDC_ENDTIME ), SW_RESTORE );
				}
			}
			break;
		case IDC_CHECK_RESUMECONDITION:
			{
				g_Params.m_bResumeCondition = SendMessage( GetControl( IDC_CHECK_RESUMECONDITION ), BM_GETCHECK, 0, 0 ) == BST_CHECKED ? true : false;
			}
			break;
		case IDC_EVENTCHOICES:
			{
				HWND control = (HWND)lParam;
				if ( control )
				{
					SendMessage( control, WM_GETTEXT, (WPARAM)sizeof( g_Params.m_szParameters ), (LPARAM)g_Params.m_szParameters );
				}
			}
			break;
		case IDC_ABSOLUTESTART:
			{
//.........这里部分代码省略.........

开发者ID:DeadZoneLuna，项目名称:SourceEngine2007，代码行数:101，代码来源:eventproperties_firetrigger.cpp

示例15: DialogProc

BOOL CALLBACK DialogProc(HWND hwndDlg, UINT uMsg, WPARAM wParam, LPARAM lParam)
{
  switch (uMsg)
  {
    // handle notifications
    case WM_COMMAND:
    {
      HWND hwCtl = GetDlgItem(hwndDlg, LOWORD(wParam));
      struct nsControl* ctl = GetControl(hwCtl);

      if (ctl == NULL)
        break;

      if (HIWORD(wParam) == BN_CLICKED && (ctl->type == NSCTL_BUTTON || ctl->type == NSCTL_LINK))
      {
        if (ctl->callbacks.onClick)
        {
          pushint((int) hwCtl);
          g_pluginParms->ExecuteCodeSegment(ctl->callbacks.onClick - 1, 0);
        }
      }
      else if (HIWORD(wParam) == EN_CHANGE && ctl->type == NSCTL_EDIT)
      {
        if (ctl->callbacks.onChange)
        {
          pushint((int) hwCtl);
          g_pluginParms->ExecuteCodeSegment(ctl->callbacks.onChange - 1, 0);
        }
      }
      else if (HIWORD(wParam) == LBN_SELCHANGE && ctl->type == NSCTL_LISTBOX)
      {
        if (ctl->callbacks.onChange)
        {
          pushint((int) hwCtl);
          g_pluginParms->ExecuteCodeSegment(ctl->callbacks.onChange - 1, 0);
        }
      }
      else if ((HIWORD(wParam) == CBN_EDITUPDATE || HIWORD(wParam) == CBN_SELCHANGE)
                && ctl->type == NSCTL_COMBOBOX)
      {
        if (ctl->callbacks.onChange)
        {
          pushint((int) hwCtl);
          g_pluginParms->ExecuteCodeSegment(ctl->callbacks.onChange - 1, 0);
        }
      }
      else if (HIWORD(wParam) == STN_CLICKED && ctl->type == NSCTL_STATIC)
      {
        if (ctl->callbacks.onClick)
        {
          pushint((int) hwCtl);
          g_pluginParms->ExecuteCodeSegment(ctl->callbacks.onClick - 1, 0);
        }
      }

      break;
    }

    case WM_NOTIFY:
    {
      LPNMHDR nmhdr = (LPNMHDR) lParam;
      struct nsControl* ctl = GetControl(nmhdr->hwndFrom);

      if (ctl == NULL)
        break;

      if (!ctl->callbacks.onNotify)
        break;

      pushint((int) nmhdr);
      pushint(nmhdr->code);
      pushint((int) nmhdr->hwndFrom);
      g_pluginParms->ExecuteCodeSegment(ctl->callbacks.onNotify - 1, 0);
    }

    // handle links
    case WM_DRAWITEM:
    {
      DRAWITEMSTRUCT* lpdis = (DRAWITEMSTRUCT*)lParam;
      RECT rc;
      TCHAR text[1024];

      // http://blogs.msdn.com/oldnewthing/archive/2005/05/03/414317.aspx#414357
      // says we should call SystemParametersInfo(SPI_GETKEYBOARDCUES,...) to make
      // sure, does not seem to be required, might be a win2k bug, or it might
      // only apply to menus
      BOOL hideFocus = (lpdis->itemState & ODS_NOFOCUSRECT);
      BOOL hideAccel = (lpdis->itemState & ODS_NOACCEL);

      struct nsControl* ctl = GetControl(lpdis->hwndItem);
      if (ctl == NULL)
        break;

      // We need lpdis->rcItem later
      rc = lpdis->rcItem;

      // Get button's text
      text[0] = _T('\0');
      GetWindowText(lpdis->hwndItem, text, 1024);

//.........这里部分代码省略.........

开发者ID:kichik，项目名称:nsis-1，代码行数:101，代码来源:nsDialogs.c

示例16: switch

bool CGUIDialogFileStacking::OnMessage(CGUIMessage& message)
{
  switch ( message.GetMessage() )
  {
  case GUI_MSG_WINDOW_DEINIT:
    CGUIDialog::OnMessage(message);
    if (m_stackItems)
      m_stackItems->Clear();
    return true;
  case GUI_MSG_WINDOW_INIT:
    {
      CGUIDialog::OnMessage(message);
      m_iSelectedFile = -1;
#ifdef PRE_SKIN_VERSION_2_1_COMPATIBILITY
      m_iFrames = 0;

      // enable the CD's
      for (int i = 1; i <= m_iNumberOfFiles; ++i)
      {
        CONTROL_ENABLE(i);
        SET_CONTROL_VISIBLE(i);
      }

      // disable CD's we dont use
      for (int i = m_iNumberOfFiles + 1; i <= 40; ++i)
      {
        SET_CONTROL_HIDDEN(i);
        CONTROL_DISABLE(i);
      }
#endif
      if (GetControl(STACK_LIST))
      { // have the new stack list instead - fill it up
        CGUIMessage msg(GUI_MSG_LABEL_RESET, GetID(), STACK_LIST);
        OnMessage(msg);
        for (int i = 0; i < m_iNumberOfFiles; i++)
        {
          CStdString label;
          label.Format("Part %i", i+1);
          CFileItem *item = new CFileItem(label);
          m_stackItems->Add(item);
          CGUIMessage msg(GUI_MSG_LABEL_ADD, GetID(), STACK_LIST, 0, 0, item);
          OnMessage(msg);
        }
      }
      return true;
    }
    break;

  case GUI_MSG_CLICKED:
    {
#ifdef PRE_SKIN_VERSION_2_1_COMPATIBILITY
      if (message.GetSenderId() != STACK_LIST)
        m_iSelectedFile = message.GetSenderId();
      else if (message.GetParam1() == ACTION_SELECT_ITEM)
      {
        // grab the selected item
        CGUIMessage msg(GUI_MSG_ITEM_SELECTED, GetID(), STACK_LIST);
        OnMessage(msg);
        m_iSelectedFile = msg.GetParam1() + 1;
      }
#endif
      Close();
      return true;
    }
    break;
  }
  return CGUIDialog::OnMessage(message);
}

开发者ID:Avoidnf8，项目名称:xbmc-fork，代码行数:68，代码来源:GUIDialogFileStacking.cpp

示例17: GetControl

void CGUIDialogKeyboardGeneric::MoveCursor(int iAmount)
{
  CGUIControl *edit = GetControl(CTL_EDIT);
  if (edit)
    edit->OnAction(CAction(iAmount < 0 ? ACTION_CURSOR_LEFT : ACTION_CURSOR_RIGHT));
}

开发者ID:Distrotech，项目名称:xbmc，代码行数:6，代码来源:GUIDialogKeyboardGeneric.cpp

示例18: GetControl

void DialogAbout::TabPlugins::Initialize()
{
	// Add columns to the list view
	HWND item = GetControl(Id_ItemsListView);

	LVCOLUMN lvc;
	lvc.mask = LVCF_FMT | LVCF_WIDTH | LVCF_TEXT | LVCF_SUBITEM;
	lvc.fmt = LVCFMT_LEFT;  // left-aligned column
	lvc.iSubItem = 0;
	lvc.cx = 140;
	lvc.pszText = GetString(ID_STR_NAME);
	ListView_InsertColumn(item, 0, &lvc);
	lvc.iSubItem = 1;
	lvc.cx = 80;
	lvc.pszText = GetString(ID_STR_VERSION);
	ListView_InsertColumn(item, 1, &lvc);
	lvc.iSubItem = 2;

	// Start 3rd column at max width
	RECT rect;
	lvc.cx = GetWindowRect(item, &rect) ? (rect.right - rect.left - 193) : 290;
	lvc.pszText = GetString(ID_STR_AUTHOR);
	ListView_InsertColumn(item, 2, &lvc);

	LVITEM vitem;
	vitem.mask = LVIF_TEXT;
	vitem.iItem = 0;
	vitem.iSubItem = 0;

	auto findPlugins = [&](const std::wstring& path)
	{
		std::wstring filter = path + L"*.dll";

		WIN32_FIND_DATA fd;
		HANDLE hSearch = FindFirstFile(filter.c_str(), &fd);
		if (hSearch == INVALID_HANDLE_VALUE)
		{
			return;
		}

		int index = 0;
		do
		{
			// Try to get the version and author
			std::wstring tmpSz = path + fd.cFileName;
			const WCHAR* path = tmpSz.c_str();

			LOADED_IMAGE* loadedImage = ImageLoad(StringUtil::Narrow(path).c_str(), nullptr);
			if (!loadedImage)
			{
				LogErrorF(L"About Dialog - Unable to load plugin: %s", fd.cFileName);
				continue;
			}

			const WORD imageBitness = loadedImage->FileHeader->FileHeader.Machine;
			ImageUnload(loadedImage);

#ifdef _WIN64
			const WORD rainmeterBitness = IMAGE_FILE_MACHINE_AMD64;
#elif _WIN32
			const WORD rainmeterBitness = IMAGE_FILE_MACHINE_I386;
#endif

			if (rainmeterBitness != imageBitness)
			{
				LogErrorF(L"About Dialog - Incorrect bitness of plugin: %s", fd.cFileName);
				continue;
			}

			vitem.iItem = index;
			vitem.pszText = fd.cFileName;

			// Try to get version and author from file resources first
			DWORD handle;
			DWORD versionSize = GetFileVersionInfoSize(path, &handle);
			if (versionSize)
			{
				bool found = false;
				void* data = new BYTE[versionSize];
				if (GetFileVersionInfo(path, 0, versionSize, data))
				{
					UINT len;
					struct LANGCODEPAGE
					{
						WORD wLanguage;
						WORD wCodePage;
					} *lcp;

					if (VerQueryValue(data, L"\\VarFileInfo\\Translation", (LPVOID*)&lcp, &len))
					{
						WCHAR key[64];
						LPWSTR value;

						_snwprintf_s(key, _TRUNCATE, L"\\StringFileInfo\\%04x%04x\\ProductName", lcp[0].wLanguage, lcp[0].wCodePage);
						if (VerQueryValue(data, (LPTSTR)(LPCTSTR)key, (void**)&value, &len) &&
							wcscmp(value, L"Rainmeter") == 0)
						{
							ListView_InsertItem(item, &vitem);
							++index;
							found = true;
//.........这里部分代码省略.........

开发者ID:AlonTzarafi，项目名称:rainmeter，代码行数:101，代码来源:DialogAbout.cpp

注：本文中的GetControl函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ GetController函数代码示例发布时间：2022-05-30

C++ GetContextSuspended函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18282|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9679|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8180|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8549|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8458|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9393|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8431|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7865|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8416|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ GetControl函数代码示例

示例1: GetControl

示例2: GetControl

示例3: switch

示例4: GetControl

示例5: GetWindow

示例6: CGUIButtonControl

示例7: GetControl

示例8: ASSERT

示例9: switch

示例10: switch

示例11: switch

示例12: InitializeState

示例13: SaveValue

示例14: InternalHandleMessage

示例15: DialogProc

示例16: switch

示例17: GetControl

示例18: GetControl

请发表评论

全部评论

上一篇：

下一篇：

bradtraversy/iweather: Ionic 3 mobile we

CVE-2022-36918

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053