C++ GetFirmwareParams函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中GetFirmwareParams函数的典型用法代码示例。如果您正苦于以下问题：C++ GetFirmwareParams函数的具体用法？C++ GetFirmwareParams怎么用？C++ GetFirmwareParams使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了GetFirmwareParams函数的16个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: XN_IS_STATUS_OK

XnStatus XnSensorAudioStream::MapPropertiesToFirmware()
{
	XnStatus nRetVal = XN_STATUS_OK;

	XN_IS_STATUS_OK(m_Helper.MapFirmwareProperty(SampleRateProperty(), GetFirmwareParams()->m_AudioSampleRate, FALSE, ConvertSampleRateToFirmwareRate));
	XN_IS_STATUS_OK(m_Helper.MapFirmwareProperty(NumberOfChannelsProperty(), GetFirmwareParams()->m_AudioStereo, FALSE, ConvertNumberOfChannelsToStereo));
	XN_IS_STATUS_OK(m_Helper.MapFirmwareProperty(m_LeftChannelVolume, GetFirmwareParams()->m_AudioLeftChannelGain, TRUE));
	XN_IS_STATUS_OK(m_Helper.MapFirmwareProperty(m_RightChannelVolume, GetFirmwareParams()->m_AudioRightChannelGain, TRUE));

	return (XN_STATUS_OK);
}

开发者ID:roxlu，项目名称:SensorKinect，代码行数:11，代码来源:XnSensorAudioStream.cpp

示例2: GetFirmwareParams

XnStatus XnSensorDepthStream::OpenStreamImpl()
{
	XnStatus nRetVal = XN_STATUS_OK;

	nRetVal = GetFirmwareParams()->m_Stream1Mode.SetValue(XN_VIDEO_STREAM_DEPTH);
	XN_IS_STATUS_OK(nRetVal);

	// Cropping
	if (m_FirmwareCropEnabled.GetValue() == TRUE)
	{
		nRetVal = m_Helper.ConfigureFirmware(m_FirmwareCropSizeX);
		XN_IS_STATUS_OK(nRetVal);;
		nRetVal = m_Helper.ConfigureFirmware(m_FirmwareCropSizeY);
		XN_IS_STATUS_OK(nRetVal);;
		nRetVal = m_Helper.ConfigureFirmware(m_FirmwareCropOffsetX);
		XN_IS_STATUS_OK(nRetVal);;
		nRetVal = m_Helper.ConfigureFirmware(m_FirmwareCropOffsetY);
		XN_IS_STATUS_OK(nRetVal);;
	}
	nRetVal = m_Helper.ConfigureFirmware(m_FirmwareCropEnabled);
	XN_IS_STATUS_OK(nRetVal);;

	nRetVal = XnDepthStream::Open();
	XN_IS_STATUS_OK(nRetVal);

	return (XN_STATUS_OK);
}

开发者ID:bouffa，项目名称:Sensor，代码行数:27，代码来源:XnSensorDepthStream.cpp

示例3: switch

XnStatus XnSensorDepthStream::DecidePixelSizeFactor()
{
	XnStatus nRetVal = XN_STATUS_OK;
	
	XnUInt32 nPixelSizeFactor;
	switch (GetFirmwareParams()->m_ReferenceResolution.GetValue())
	{
	case XN_RESOLUTION_SXGA:
		nPixelSizeFactor = 1;
		break;
	case XN_RESOLUTION_VGA:
		nPixelSizeFactor = 2;
		break;
	default:
		XN_LOG_WARNING_RETURN(XN_STATUS_ERROR, XN_MASK_DEVICE_SENSOR, "Can't resolve pixel size for reference resolution %llu", GetFirmwareParams()->m_ReferenceResolution.GetValue());
	}
	
	if (m_Helper.GetFirmwareVersion() < XN_SENSOR_FW_VER_3_0)
	{
		// due to some weird bug (we don't know the reason), DevKits older than 3.0 uses
		// a smaller pixel size, but const shift remains the same. To work around this bug,
		// we will just update pixel size, instead of updating pixel size factor (so that const
		// shift will not be updated)
		nRetVal = ZeroPlanePixelSizeProperty().UnsafeUpdateValue(m_Helper.GetFixedParams()->GetZeroPlanePixelSize() * nPixelSizeFactor);
		XN_IS_STATUS_OK(nRetVal);
	}
	else
	{
		PixelSizeFactorProperty().UnsafeUpdateValue(nPixelSizeFactor);
	}
	
	return (XN_STATUS_OK);
}

开发者ID:bouffa，项目名称:Sensor，代码行数:33，代码来源:XnSensorDepthStream.cpp

示例4: xnUSBShutdownReadThread

XnStatus XnSensorDepthStream::ConfigureStreamImpl()
{
	XnStatus nRetVal = XN_STATUS_OK;

	xnUSBShutdownReadThread(GetHelper()->GetPrivateData()->pSpecificDepthUsb->pUsbConnection->UsbEp);

	nRetVal = SetActualRead(TRUE);
	XN_IS_STATUS_OK(nRetVal);

	XN_IS_STATUS_OK(m_Helper.ConfigureFirmware(m_InputFormat));
	XN_IS_STATUS_OK(m_Helper.ConfigureFirmware(ResolutionProperty()));
	XN_IS_STATUS_OK(m_Helper.ConfigureFirmware(FPSProperty()));
	XN_IS_STATUS_OK(m_Helper.ConfigureFirmware(m_HoleFilter));
	XN_IS_STATUS_OK(m_Helper.ConfigureFirmware(m_Gain));

	// we need to turn decimation on when resolution is QVGA, and FPS is different than 60
	// NOTE: this is ugly as hell. This logic should be moved to firmware.
	XnBool bDecimation = (GetResolution() == XN_RESOLUTION_QVGA && GetFPS() != 60);
	nRetVal = GetFirmwareParams()->m_DepthDecimation.SetValue(bDecimation);
	XN_IS_STATUS_OK(nRetVal);

	XN_IS_STATUS_OK(m_Helper.ConfigureFirmware(m_FirmwareRegistration));
	XN_IS_STATUS_OK(m_Helper.ConfigureFirmware(m_FirmwareMirror));
	XN_IS_STATUS_OK(m_Helper.ConfigureFirmware(m_GMCMode));
	XN_IS_STATUS_OK(m_Helper.ConfigureFirmware(m_WhiteBalance));

	nRetVal = m_Helper.GetCmosInfo()->SetCmosConfig(XN_CMOS_TYPE_DEPTH, GetResolution(), GetFPS());
	XN_IS_STATUS_OK(nRetVal);

	return XN_STATUS_OK;
}

开发者ID:roxlu，项目名称:SensorKinect，代码行数:31，代码来源:XnSensorDepthStream.cpp

示例5: GetFirmwareParams

XnStatus XnSensorIRStream::OpenStreamImpl()
{
	XnStatus nRetVal = XN_STATUS_OK;

	nRetVal = GetFirmwareParams()->m_Stream0Mode.SetValue(XN_VIDEO_STREAM_IR);
	XN_IS_STATUS_OK(nRetVal);

	// Cropping
	if (m_FirmwareCropMode.GetValue() != XN_FIRMWARE_CROPPING_MODE_DISABLED)
	{
		nRetVal = m_Helper.ConfigureFirmware(m_FirmwareCropSizeX);
		XN_IS_STATUS_OK(nRetVal);;
		nRetVal = m_Helper.ConfigureFirmware(m_FirmwareCropSizeY);
		XN_IS_STATUS_OK(nRetVal);;
		nRetVal = m_Helper.ConfigureFirmware(m_FirmwareCropOffsetX);
		XN_IS_STATUS_OK(nRetVal);;
		nRetVal = m_Helper.ConfigureFirmware(m_FirmwareCropOffsetY);
		XN_IS_STATUS_OK(nRetVal);;
	}
	nRetVal = m_Helper.ConfigureFirmware(m_FirmwareCropMode);
	XN_IS_STATUS_OK(nRetVal);;


	nRetVal = XnIRStream::Open();
	XN_IS_STATUS_OK(nRetVal);

	return (XN_STATUS_OK);
}

开发者ID:Arkapravo，项目名称:OpenNI2，代码行数:28，代码来源:XnSensorIRStream.cpp

示例6: xnUSBShutdownReadThread

XnStatus XnSensorIRStream::ConfigureStreamImpl()
{
	XnStatus nRetVal = XN_STATUS_OK;

	xnUSBShutdownReadThread(GetHelper()->GetPrivateData()->pSpecificImageUsb->pUsbConnection->UsbEp);

	nRetVal = SetActualRead(TRUE);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = m_Helper.ConfigureFirmware(ResolutionProperty());
	XN_IS_STATUS_OK(nRetVal);;
	nRetVal = m_Helper.ConfigureFirmware(FPSProperty());
	XN_IS_STATUS_OK(nRetVal);;

	// IR mirror is always off in firmware
	nRetVal = GetFirmwareParams()->m_IRMirror.SetValue(FALSE);
	XN_IS_STATUS_OK(nRetVal);

	// CMOS
	if (GetResolution() != XN_RESOLUTION_SXGA)
	{
		nRetVal = m_Helper.GetCmosInfo()->SetCmosConfig(XN_CMOS_TYPE_DEPTH, GetResolution(), GetFPS());
		XN_IS_STATUS_OK(nRetVal);
	}

	return (XN_STATUS_OK);
}

开发者ID:Arkapravo，项目名称:OpenNI2，代码行数:27，代码来源:XnSensorIRStream.cpp

示例7: GetFirmwareParams

XnStatus XnSensorAudioStream::OpenStreamImpl()
{
	XnStatus nRetVal = XN_STATUS_OK;

	nRetVal = GetFirmwareParams()->m_Stream2Mode.SetValue(XN_AUDIO_STREAM_ON);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = XnAudioStream::Open();
	XN_IS_STATUS_OK(nRetVal);

	return (XN_STATUS_OK);
}

开发者ID:roxlu，项目名称:SensorKinect，代码行数:12，代码来源:XnSensorAudioStream.cpp

示例8: XN_IS_STATUS_OK

XnStatus XnSensorIRStream::MapPropertiesToFirmware()
{
	XnStatus nRetVal = XN_STATUS_OK;

	XN_IS_STATUS_OK(m_Helper.MapFirmwareProperty(ResolutionProperty(), GetFirmwareParams()->m_IRResolution, FALSE));
	XN_IS_STATUS_OK(m_Helper.MapFirmwareProperty(FPSProperty(), GetFirmwareParams()->m_IRFPS, FALSE));
	XN_IS_STATUS_OK(m_Helper.MapFirmwareProperty(m_FirmwareCropSizeX, GetFirmwareParams()->m_IRCropSizeX, TRUE));
	XN_IS_STATUS_OK(m_Helper.MapFirmwareProperty(m_FirmwareCropSizeY, GetFirmwareParams()->m_IRCropSizeY, TRUE));
	XN_IS_STATUS_OK(m_Helper.MapFirmwareProperty(m_FirmwareCropOffsetX, GetFirmwareParams()->m_IRCropOffsetX, TRUE));
	XN_IS_STATUS_OK(m_Helper.MapFirmwareProperty(m_FirmwareCropOffsetY, GetFirmwareParams()->m_IRCropOffsetY, TRUE));
	XN_IS_STATUS_OK(m_Helper.MapFirmwareProperty(m_FirmwareCropEnabled, GetFirmwareParams()->m_IRCropEnabled, TRUE));

	return (XN_STATUS_OK);
}

开发者ID:HalfdanJ，项目名称:SensorKinect，代码行数:14，代码来源:XnSensorIRStream.cpp

示例9: DepthUtilsShutdown

XnStatus XnSensorDepthStream::Free()
{
	DepthUtilsShutdown(&m_depthUtilsHandle);

	// unregister from external properties (internal ones will be destroyed anyway...)
	if (m_hReferenceSizeChangedCallback != NULL)
	{
		GetFirmwareParams()->m_ReferenceResolution.OnChangeEvent().Unregister(m_hReferenceSizeChangedCallback);
		m_hReferenceSizeChangedCallback = NULL;
	}

	m_Helper.Free();

	XnDepthStream::Free();

	return (XN_STATUS_OK);
}

开发者ID:jan-vitek，项目名称:OpenNI2，代码行数:17，代码来源:XnSensorDepthStream.cpp

示例10: GetFirmwareParams

XnStatus XnSensorImageStream::OpenStreamImpl()
{
	XnStatus nRetVal = XN_STATUS_OK;

	nRetVal = GetFirmwareParams()->m_Stream0Mode.SetValue(XN_VIDEO_STREAM_COLOR);
	XN_IS_STATUS_OK(nRetVal);

	// Cropping
	if (m_FirmwareCropEnabled.GetValue() == TRUE)
	{
		XN_IS_STATUS_OK(m_Helper.ConfigureFirmware(m_FirmwareCropSizeX));
		XN_IS_STATUS_OK(m_Helper.ConfigureFirmware(m_FirmwareCropSizeY));
		XN_IS_STATUS_OK(m_Helper.ConfigureFirmware(m_FirmwareCropOffsetX));
		XN_IS_STATUS_OK(m_Helper.ConfigureFirmware(m_FirmwareCropOffsetY));
	}
	XN_IS_STATUS_OK(m_Helper.ConfigureFirmware(m_FirmwareCropEnabled));

	nRetVal = XnImageStream::Open();
	XN_IS_STATUS_OK(nRetVal);

	return (XN_STATUS_OK);
}

开发者ID:roxlu，项目名称:SensorKinect，代码行数:22，代码来源:XnSensorImageStream.cpp

示例11: GetFirmwareParams

XnStatus XnSensorDepthStream::OpenStreamImpl()
{
	XnStatus nRetVal = XN_STATUS_OK;

	// Turn stream on
	nRetVal = GetFirmwareParams()->m_Stream1Mode.SetValue(XN_VIDEO_STREAM_DEPTH);
	XN_IS_STATUS_OK(nRetVal);

	// CloseRange
	if (m_Helper.GetFirmwareVersion() < XN_SENSOR_FW_VER_5_6)
	{
		CloseRangeControl((XnBool)m_CloseRange.GetValue());
	}
	else
	{
		nRetVal = m_Helper.ConfigureFirmware(m_CloseRange);
		XN_IS_STATUS_OK(nRetVal);
	}

	// Cropping
	if (m_FirmwareCropMode.GetValue() != XN_FIRMWARE_CROPPING_MODE_DISABLED)
	{
		nRetVal = m_Helper.ConfigureFirmware(m_FirmwareCropSizeX);
		XN_IS_STATUS_OK(nRetVal);;
		nRetVal = m_Helper.ConfigureFirmware(m_FirmwareCropSizeY);
		XN_IS_STATUS_OK(nRetVal);;
		nRetVal = m_Helper.ConfigureFirmware(m_FirmwareCropOffsetX);
		XN_IS_STATUS_OK(nRetVal);;
		nRetVal = m_Helper.ConfigureFirmware(m_FirmwareCropOffsetY);
		XN_IS_STATUS_OK(nRetVal);;
	}
	nRetVal = m_Helper.ConfigureFirmware(m_FirmwareCropMode);
	XN_IS_STATUS_OK(nRetVal);;

	nRetVal = XnDepthStream::Open();
	XN_IS_STATUS_OK(nRetVal);

	return (XN_STATUS_OK);
}

开发者ID:jan-vitek，项目名称:OpenNI2，代码行数:39，代码来源:XnSensorDepthStream.cpp

示例12: xnUSBShutdownReadThread

XnStatus XnSensorDepthStream::ConfigureStreamImpl()
{
	XnStatus nRetVal = XN_STATUS_OK;

	xnUSBShutdownReadThread(GetHelper()->GetPrivateData()->pSpecificDepthUsb->pUsbConnection->UsbEp);

	nRetVal = SetActualRead(TRUE);
	XN_IS_STATUS_OK(nRetVal);

	XN_IS_STATUS_OK(m_Helper.ConfigureFirmware(m_InputFormat));
	XN_IS_STATUS_OK(m_Helper.ConfigureFirmware(ResolutionProperty()));
	XN_IS_STATUS_OK(m_Helper.ConfigureFirmware(FPSProperty()));
	XN_IS_STATUS_OK(m_Helper.ConfigureFirmware(m_HoleFilter));
	XN_IS_STATUS_OK(m_Helper.ConfigureFirmware(m_Gain));

	// we need to turn decimation on when resolution is QVGA, and FPS is different than 60
	// NOTE: this is ugly as hell. This logic should be moved to firmware.
	XnBool bDecimation = (GetResolution() == XN_RESOLUTION_QVGA && GetFPS() != 60);
	nRetVal = GetFirmwareParams()->m_DepthDecimation.SetValue(bDecimation);
	XN_IS_STATUS_OK(nRetVal);

	XN_IS_STATUS_OK(m_Helper.ConfigureFirmware(m_FirmwareRegistration));
	XN_IS_STATUS_OK(m_Helper.ConfigureFirmware(m_FirmwareMirror));
	XN_IS_STATUS_OK(m_Helper.ConfigureFirmware(m_GMCMode));
	XN_IS_STATUS_OK(m_Helper.ConfigureFirmware(m_WhiteBalance));

	nRetVal = m_Helper.GetCmosInfo()->SetCmosConfig(XN_CMOS_TYPE_DEPTH, GetResolution(), GetFPS());
	XN_IS_STATUS_OK(nRetVal);

	// --avin mod--
	//Turn off the IR projector anti-cover thingy. I find it annoying and It's off on the XBox360 so it must be safe :-)
	//This is probably not the best way to do it, but adding it as a real param is too much work for me at the moment...
	XnHostProtocolSetParam(GetHelper()->GetPrivateData(), 0x105, 0);
	
	return XN_STATUS_OK;
}

开发者ID:samvit，项目名称:noseTracking，代码行数:36，代码来源:XnSensorDepthStream.cpp

示例13: XN_IS_STATUS_OK


//.........这里部分代码省略.........

	nRetVal = ParamCoefficientProperty().UnsafeUpdateValue(XN_SHIFTS_PARAM_COEFFICIENT);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = ShiftScaleProperty().UnsafeUpdateValue(XN_SHIFTS_SHIFT_SCALE);
	XN_IS_STATUS_OK(nRetVal);

	// read some data from firmware
	XnDepthInformation DepthInformation;
	nRetVal = XnHostProtocolAlgorithmParams(m_Helper.GetPrivateData(), XN_HOST_PROTOCOL_ALGORITHM_DEPTH_INFO, &DepthInformation, sizeof(XnDepthInformation), XN_RESOLUTION_VGA, 30);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = ConstShiftProperty().UnsafeUpdateValue(DepthInformation.nConstShift);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = ZeroPlaneDistanceProperty().UnsafeUpdateValue(m_Helper.GetFixedParams()->GetZeroPlaneDistance());
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = ZeroPlanePixelSizeProperty().UnsafeUpdateValue(m_Helper.GetFixedParams()->GetZeroPlanePixelSize());
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = EmitterDCmosDistanceProperty().UnsafeUpdateValue(m_Helper.GetFixedParams()->GetEmitterDCmosDistance());
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = GetDCmosRCmosDistanceProperty().UnsafeUpdateValue(m_Helper.GetFixedParams()->GetDCmosRCmosDistance());
	XN_IS_STATUS_OK(nRetVal);

	XnDouble fZPPS = m_Helper.GetFixedParams()->GetZeroPlanePixelSize();
	XnInt nZPD = m_Helper.GetFixedParams()->GetZeroPlaneDistance();

	nRetVal = m_HorizontalFOV.UnsafeUpdateValue(2*atan(fZPPS*XN_SXGA_X_RES/2/nZPD));
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = m_VerticalFOV.UnsafeUpdateValue(2*atan(fZPPS*XN_VGA_Y_RES*2/2/nZPD));
	XN_IS_STATUS_OK(nRetVal);

	// init helper
	nRetVal = m_Helper.Init(this, this);
	XN_IS_STATUS_OK(nRetVal);

	if (m_Helper.GetFirmwareVersion() < XN_SENSOR_FW_VER_3_0)
	{
		nRetVal = m_GMCMode.UnsafeUpdateValue(FALSE);
		XN_IS_STATUS_OK(nRetVal);
	}

	if (m_Helper.GetFirmwareVersion() < XN_SENSOR_FW_VER_5_2)
	{
		nRetVal = m_WavelengthCorrection.UnsafeUpdateValue(FALSE);
		XN_IS_STATUS_OK(nRetVal);
	}

	if (m_Helper.GetFirmwareVersion() < XN_SENSOR_FW_VER_4_0)
	{
		nRetVal = m_WhiteBalance.UnsafeUpdateValue(FALSE);
		XN_IS_STATUS_OK(nRetVal);
	}

	// on old firmwares, the host decides on the default gain. On new firmwares, we read it from firmware
	if (m_Helper.GetFirmware()->GetInfo()->nFWVer > XN_SENSOR_FW_VER_1_2)
	{
		nRetVal = m_Gain.UnsafeUpdateValue(GetFirmwareParams()->m_DepthGain.GetValue());
		XN_IS_STATUS_OK(nRetVal);
	}

	// registration
	XnCallbackHandle hCallbackDummy;	
	nRetVal = ResolutionProperty().OnChangeEvent().Register(DecideFirmwareRegistrationCallback, this, hCallbackDummy);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = DecideFirmwareRegistration((XnBool)m_DepthRegistration.GetValue(), (XnProcessingType)m_RegistrationType.GetValue(), GetResolution());
	XN_IS_STATUS_OK(nRetVal);

	// data processor
	nRetVal = m_Helper.RegisterDataProcessorProperty(m_InputFormat);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = m_Helper.RegisterDataProcessorProperty(ResolutionProperty());
	XN_IS_STATUS_OK(nRetVal);

	// pixel size factor
	nRetVal = GetFirmwareParams()->m_ReferenceResolution.OnChangeEvent().Register(DecidePixelSizeFactorCallback, this, m_hReferenceSizeChangedCallback);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = DecidePixelSizeFactor();
	XN_IS_STATUS_OK(nRetVal);

	// initialize registration
	if (m_Helper.GetFirmwareVersion() > XN_SENSOR_FW_VER_5_3)
	{
		nRetVal = PopulateSensorCalibrationInfo();
		XN_IS_STATUS_OK(nRetVal);
		nRetVal = DepthUtilsInitialize(&m_calibrationInfo, &m_depthUtilsHandle);
		XN_IS_STATUS_OK(nRetVal);
		nRetVal = DepthUtilsSetDepthConfiguration(m_depthUtilsHandle, GetXRes(), GetYRes(), GetOutputFormat(), IsMirrored());
		XN_IS_STATUS_OK(nRetVal);
	}

	return (XN_STATUS_OK);
}

开发者ID:jan-vitek，项目名称:OpenNI2，代码行数:101，代码来源:XnSensorDepthStream.cpp

示例14: GetFirmwareParams

XnStatus XnSensorImageStream::MapPropertiesToFirmware()
{
	XnStatus nRetVal = XN_STATUS_OK;

	nRetVal = m_Helper.MapFirmwareProperty(m_InputFormat, GetFirmwareParams()->m_ImageFormat, FALSE);
	XN_IS_STATUS_OK(nRetVal);;
	nRetVal = m_Helper.MapFirmwareProperty(ResolutionProperty(), GetFirmwareParams()->m_ImageResolution, FALSE);
	XN_IS_STATUS_OK(nRetVal);;
	nRetVal = m_Helper.MapFirmwareProperty(FPSProperty(), GetFirmwareParams()->m_ImageFPS, FALSE);
	XN_IS_STATUS_OK(nRetVal);;
	nRetVal = m_Helper.MapFirmwareProperty(m_AntiFlicker, GetFirmwareParams()->m_ImageFlickerDetection, TRUE);
	XN_IS_STATUS_OK(nRetVal);;
	nRetVal = m_Helper.MapFirmwareProperty(m_ImageQuality, GetFirmwareParams()->m_ImageQuality, TRUE);
	XN_IS_STATUS_OK(nRetVal);;
	nRetVal = m_Helper.MapFirmwareProperty(m_FirmwareMirror, GetFirmwareParams()->m_ImageMirror, TRUE);
	XN_IS_STATUS_OK(nRetVal);;
	nRetVal = m_Helper.MapFirmwareProperty(m_FirmwareCropSizeX, GetFirmwareParams()->m_ImageCropSizeX, TRUE);
	XN_IS_STATUS_OK(nRetVal);;
	nRetVal = m_Helper.MapFirmwareProperty(m_FirmwareCropSizeY, GetFirmwareParams()->m_ImageCropSizeY, TRUE);
	XN_IS_STATUS_OK(nRetVal);;
	nRetVal = m_Helper.MapFirmwareProperty(m_FirmwareCropOffsetX, GetFirmwareParams()->m_ImageCropOffsetX, TRUE);
	XN_IS_STATUS_OK(nRetVal);;
	nRetVal = m_Helper.MapFirmwareProperty(m_FirmwareCropOffsetY, GetFirmwareParams()->m_ImageCropOffsetY, TRUE);
	XN_IS_STATUS_OK(nRetVal);;
	nRetVal = m_Helper.MapFirmwareProperty(m_FirmwareCropEnabled, GetFirmwareParams()->m_ImageCropEnabled, TRUE);
	XN_IS_STATUS_OK(nRetVal);;
	nRetVal = m_Helper.MapFirmwareProperty(m_Sharpness, GetFirmwareParams()->m_ImageSharpness, TRUE);
	XN_IS_STATUS_OK(nRetVal);;
	nRetVal = m_Helper.MapFirmwareProperty(m_FirmwareAutoWhiteBalance, GetFirmwareParams()->m_ImageAutoWhiteBalance, TRUE);
	XN_IS_STATUS_OK(nRetVal);;
	nRetVal = m_Helper.MapFirmwareProperty(m_FirmwareColorTemperature, GetFirmwareParams()->m_ImageColorTemperature, TRUE);
	XN_IS_STATUS_OK(nRetVal);;
	nRetVal = m_Helper.MapFirmwareProperty(m_BackLightCompensation, GetFirmwareParams()->m_ImageBacklightCompensation, TRUE);
	XN_IS_STATUS_OK(nRetVal);;
	nRetVal = m_Helper.MapFirmwareProperty(m_Gain, GetFirmwareParams()->m_ImageGain, TRUE);
	XN_IS_STATUS_OK(nRetVal);;
	nRetVal = m_Helper.MapFirmwareProperty(m_FirmwareExposure, GetFirmwareParams()->m_ImageExposureBar, TRUE);
	XN_IS_STATUS_OK(nRetVal);;
	nRetVal = m_Helper.MapFirmwareProperty(m_FirmwareAutoExposure, GetFirmwareParams()->m_ImageAutoExposure, TRUE);
	XN_IS_STATUS_OK(nRetVal);;
	nRetVal = m_Helper.MapFirmwareProperty(m_LowLightCompensation, GetFirmwareParams()->m_ImageLowLightCompensation, TRUE);
	XN_IS_STATUS_OK(nRetVal);;

	return (XN_STATUS_OK);
}

开发者ID:0pascal0，项目名称:SensorKinect，代码行数:45，代码来源:XnSensorImageStream.cpp

示例15: XN_IS_STATUS_OK

XnStatus XnSensorImageStream::MapPropertiesToFirmware()
{
	XnStatus nRetVal = XN_STATUS_OK;

	XN_IS_STATUS_OK(m_Helper.MapFirmwareProperty(m_InputFormat, GetFirmwareParams()->m_ImageFormat, FALSE));
	XN_IS_STATUS_OK(m_Helper.MapFirmwareProperty(ResolutionProperty(), GetFirmwareParams()->m_ImageResolution, FALSE));
	XN_IS_STATUS_OK(m_Helper.MapFirmwareProperty(FPSProperty(), GetFirmwareParams()->m_ImageFPS, FALSE));
	XN_IS_STATUS_OK(m_Helper.MapFirmwareProperty(m_AntiFlicker, GetFirmwareParams()->m_ImageFlickerDetection, TRUE));
	XN_IS_STATUS_OK(m_Helper.MapFirmwareProperty(m_ImageQuality, GetFirmwareParams()->m_ImageQuality, TRUE));
	XN_IS_STATUS_OK(m_Helper.MapFirmwareProperty(m_FirmwareMirror, GetFirmwareParams()->m_ImageMirror, TRUE));
	XN_IS_STATUS_OK(m_Helper.MapFirmwareProperty(m_FirmwareCropSizeX, GetFirmwareParams()->m_ImageCropSizeX, TRUE));
	XN_IS_STATUS_OK(m_Helper.MapFirmwareProperty(m_FirmwareCropSizeY, GetFirmwareParams()->m_ImageCropSizeY, TRUE));
	XN_IS_STATUS_OK(m_Helper.MapFirmwareProperty(m_FirmwareCropOffsetX, GetFirmwareParams()->m_ImageCropOffsetX, TRUE));
	XN_IS_STATUS_OK(m_Helper.MapFirmwareProperty(m_FirmwareCropOffsetY, GetFirmwareParams()->m_ImageCropOffsetY, TRUE));
	XN_IS_STATUS_OK(m_Helper.MapFirmwareProperty(m_FirmwareCropEnabled, GetFirmwareParams()->m_ImageCropEnabled, TRUE));

	return (XN_STATUS_OK);
}

开发者ID:roxlu，项目名称:SensorKinect，代码行数:18，代码来源:XnSensorImageStream.cpp

示例16: SetBufferPool

XnStatus XnSensorDepthStream::Init()
{
	XnStatus nRetVal = XN_STATUS_OK;

	nRetVal = SetBufferPool(&m_BufferPool);
	XN_IS_STATUS_OK(nRetVal);

	// init base
	nRetVal = XnDepthStream::Init();
	XN_IS_STATUS_OK(nRetVal);

	m_InputFormat.UpdateSetCallback(SetInputFormatCallback, this);
	m_DepthRegistration.UpdateSetCallback(SetRegistrationCallback, this);
	m_HoleFilter.UpdateSetCallback(SetHoleFilterCallback, this);
	m_WhiteBalance.UpdateSetCallback(SetWhiteBalanceCallback, this);
	m_Gain.UpdateSetCallback(SetGainCallback, this);
	m_RegistrationType.UpdateSetCallback(SetRegistrationTypeCallback, this);
	m_AGCBin.UpdateSetCallback(SetAGCBinCallback, this);
	m_AGCBin.UpdateGetCallback(GetAGCBinCallback, this);
	m_GMCMode.UpdateSetCallback(SetGMCModeCallback, this);


	XN_VALIDATE_ADD_PROPERTIES(this, &m_InputFormat, &m_DepthRegistration, &m_HoleFilter, 
		&m_WhiteBalance, &m_Gain, &m_AGCBin, &m_SharedBufferName, &m_ActualRead, &m_GMCMode, 
		&m_RegistrationType);


	if (m_Helper.GetPrivateData()->pSensor->IsLowBandwidth())
	{
		nRetVal = m_InputFormat.UnsafeUpdateValue(XN_IO_DEPTH_FORMAT_COMPRESSED_PS);
		XN_IS_STATUS_OK(nRetVal);
	}

	// set base properties default values
	nRetVal = ResolutionProperty().UnsafeUpdateValue(XN_DEPTH_STREAM_DEFAULT_RESOLUTION);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = FPSProperty().UnsafeUpdateValue(XN_DEPTH_STREAM_DEFAULT_FPS);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = OutputFormatProperty().UnsafeUpdateValue(XN_DEPTH_STREAM_DEFAULT_OUTPUT_FORMAT);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = ParamCoefficientProperty().UnsafeUpdateValue(XN_SHIFTS_PARAM_COEFFICIENT);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = ShiftScaleProperty().UnsafeUpdateValue(XN_SHIFTS_SHIFT_SCALE);
	XN_IS_STATUS_OK(nRetVal);

	// read some data from firmware
	XnDepthInformation DepthInformation;
	nRetVal = XnHostProtocolAlgorithmParams(m_Helper.GetPrivateData(), XN_HOST_PROTOCOL_ALGORITHM_DEPTH_INFO, &DepthInformation, sizeof(XnDepthInformation), XN_RESOLUTION_VGA, 30);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = ConstShiftProperty().UnsafeUpdateValue(DepthInformation.nConstShift);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = ZeroPlaneDistanceProperty().UnsafeUpdateValue(m_Helper.GetFixedParams()->GetZeroPlaneDistance());
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = ZeroPlanePixelSizeProperty().UnsafeUpdateValue(m_Helper.GetFixedParams()->GetZeroPlanePixelSize());
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = EmitterDCmosDistanceProperty().UnsafeUpdateValue(m_Helper.GetFixedParams()->GetEmitterDCmosDistance());
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = GetDCmosRCmosDistanceProperty().UnsafeUpdateValue(m_Helper.GetFixedParams()->GetDCmosRCmosDistance());
	XN_IS_STATUS_OK(nRetVal);

	// init helper
	nRetVal = m_Helper.Init(this, this);
	XN_IS_STATUS_OK(nRetVal);

	if (m_Helper.GetFirmwareVersion() < XN_SENSOR_FW_VER_3_0)
	{
		nRetVal = m_GMCMode.UnsafeUpdateValue(FALSE);
		XN_IS_STATUS_OK(nRetVal);
	}


	if (m_Helper.GetFirmwareVersion() < XN_SENSOR_FW_VER_4_0)
	{
		nRetVal = m_WhiteBalance.UnsafeUpdateValue(FALSE);
		XN_IS_STATUS_OK(nRetVal);
	}

	// on old firmwares, the host decides on the default gain. On new firmwares, we read it from firmware
	if (m_Helper.GetFirmware()->GetInfo()->nFWVer > XN_SENSOR_FW_VER_1_2)
	{
		nRetVal = m_Gain.UnsafeUpdateValue(GetFirmwareParams()->m_DepthGain.GetValue());
		XN_IS_STATUS_OK(nRetVal);
	}

	// registration
	XnCallbackHandle hCallbackDummy;	
	nRetVal = ResolutionProperty().OnChangeEvent().Register(DecideFirmwareRegistrationCallback, this, &hCallbackDummy);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = DecideFirmwareRegistration((XnBool)m_DepthRegistration.GetValue(), (XnProcessingType)m_RegistrationType.GetValue(), GetResolution());
	XN_IS_STATUS_OK(nRetVal);
//.........这里部分代码省略.........

开发者ID:bouffa，项目名称:Sensor，代码行数:101，代码来源:XnSensorDepthStream.cpp

注：本文中的GetFirmwareParams函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ GetFirst函数代码示例发布时间：2022-05-30

C++ GetFireRate函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18279|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9678|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8180|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8549|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8458|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9393|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8431|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7865|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8416|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ GetFirmwareParams函数代码示例

示例1: XN_IS_STATUS_OK

示例2: GetFirmwareParams

示例3: switch

示例4: xnUSBShutdownReadThread

示例5: GetFirmwareParams

示例6: xnUSBShutdownReadThread

示例7: GetFirmwareParams

示例8: XN_IS_STATUS_OK

示例9: DepthUtilsShutdown

示例10: GetFirmwareParams

示例11: GetFirmwareParams

示例12: xnUSBShutdownReadThread

示例13: XN_IS_STATUS_OK

示例14: GetFirmwareParams

示例15: XN_IS_STATUS_OK

示例16: SetBufferPool

请发表评论

全部评论

上一篇：

下一篇：

DelphiCreateProcess

PacktPublishing/Python-Machine-Learning-

Mastodontico/mastodon-nginx-config

鲁东大学一米网:Win7系统USB驱动器RAM的操

魔兽世界风剑幻化任务流程

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053