C++ GetPrivateProfileInt函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中GetPrivateProfileInt函数的典型用法代码示例。如果您正苦于以下问题：C++ GetPrivateProfileInt函数的具体用法？C++ GetPrivateProfileInt怎么用？C++ GetPrivateProfileInt使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了GetPrivateProfileInt函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ConfigExperimentFromFile


//.........这里部分代码省略.........
		else if (strcmp(s,"tetrahedra")==0)
			gRubbleType=TETRAHEDRA;
		else if (strcmp(s,"mixed")==0)
			gRubbleType=MIXED;
		else if (strcmp(s,"convex")==0)
			gRubbleType=CONVEX_POLYHEDRA;
		else if (strcmp(s,"d12")==0)
			gRubbleType=D12;
		else if (strcmp(s,"capsules")==0)
			gRubbleType=CAPSULES;
		else if (strcmp(s,"mixed")==0)
			gRubbleType=MIXED;
		else
			gRubbleType=BAD_RUBBLE_TYPE;

		// Lander parameters
		GetPrivateProfileString("experiment","lander_type","",s,255,iniFile);
		if		(strcmp(s,"capsule")==0)
			gLanderType=CAPSULE_LANDER;
		else if (strcmp(s,"sphere")==0)
			gLanderType=SPHERE_LANDER;
		else if (strcmp(s,"shaped_charge")==0)
			gLanderType=SHAPED_CHARGE;
		else if (strcmp(s,"roly_poly")==0)
			gLanderType=ROLY_POLY;
		else if (strcmp(s,"cubesat")==0)
			gLanderType=CUBESAT;
		else
			gLanderType=BAD_LANDER_TYPE;

		GetPrivateProfileString("experiment","lander_size.w","0",s,255,iniFile);
		gLanderSize.x=atof(s);
		GetPrivateProfileString("experiment","lander_size.h","0",s,255,iniFile);
		gLanderSize.y=atof(s);
		GetPrivateProfileString("experiment","lander_size.d","0",s,255,iniFile);
		gLanderSize.z=atof(s);
		if (gLanderType==ROLY_POLY) {
		GetPrivateProfileString("experiment","roly_poly_radius","0",s,255,iniFile);
		gLanderSize.x=atof(s);
		GetPrivateProfileString("experiment","roly_poly_offset","0",s,255,iniFile);
		gLanderSize.y=atof(s);
		GetPrivateProfileString("experiment","roly_poly_hemisphere_ratio","1",s,255,iniFile);
		gLanderSize.z=atof(s);
		GetPrivateProfileString("experiment","roly_poly_weight_ratio","0",s,255,iniFile);
		gRPWeight=atof(s);
		}

		GetPrivateProfileString("experiment","lander_mass","0",s,255,iniFile);
		gLanderMass=atof(s);
		GetPrivateProfileString("experiment","lander_mass_ratio","1",s,255,iniFile);
		gLanderMassRatio=atof(s);

		GetPrivateProfileString("experiment","landing_roughness","0",s,255,iniFile);
		gLandingRoughness=atof(s);

		GetPrivateProfileString("experiment","vibrator_amplitude","0",s,255,iniFile);
		gVibrateAmp=atof(s);
		GetPrivateProfileString("experiment","vibrator_frequency","0",s,255,iniFile);
		gVibrateFreq=atof(s);

		// rubble parameters
		RUBBLE_SIZE=GetPrivateProfileInt("experiment","rubble_size",0,iniFile);

		GetPrivateProfileString("experiment","grain_size","0",s,255,iniFile);
		gRainSize=atof(s);

		GetPrivateProfileString("experiment","gsd.amin","0.1",s,255,iniFile);
		gsd[0]=atof(s);
		GetPrivateProfileString("experiment","gsd.amax","1.0",s,255,iniFile);
		gsd[1]=atof(s);
		GetPrivateProfileString("experiment","gsd.alpha","4.0",s,255,iniFile);
		gsd[2]=atof(s);

		GetPrivateProfileString("experiment","gravitator_threshold_mass","0",s,255,iniFile);
		gRavitatorThresholdMass=atof(s);

		GetPrivateProfileString("experiment","cell_size","1",s,255,iniFile);
		gCellSize=atof(s);

		GetPrivateProfileString("experiment","grain_density","1000",s,255,iniFile);
		gDefaultDensity=atof(s);

		gDefaultNumVerts=GetPrivateProfileInt("experiment","num_verts",12,iniFile);

		GetPrivateProfileString("experiment","vertex_spacing","10",s,255,iniFile);
		gDefaultGam=atof(s);

		GetPrivateProfileString("experiment","uniform_rubble","false",s,255,iniFile);
		if (strcmp(s,"true")==0)
			isUniformRubble=true;
		else
			isUniformRubble=false;

		GetPrivateProfileString("experiment","control_mode","manual",s,255,iniFile);
		if (strcmp(s,"manual")==0)
			isManualControl=true;
		else
			isManualControl=false;
	}
}

开发者ID:nmovshov，项目名称:ARSS_win，代码行数:101，代码来源:pods.cpp

示例2: GetPrivateProfileInt

//005535a0	-> 100%
int	CMasterLevelSystem::MasterLevelUp(LPOBJ lpObj, __int64 iAddExp, bool bEventMapReward, int iMonsterType)	//OK
{
	if( !this->IsMasterLevelUser(lpObj) )
	{
		return false;
	}
	int m_maxMasterLevel = GetPrivateProfileInt("Common", "MaxMasterLevel", 200, gDirPath.GetNewPath("MasterSystem.cfg"));
	int numCoded = 201;
	if (m_maxMasterLevel >= numCoded || m_maxMasterLevel <= 0){
		int m_maxMasterLevel = 200;
		
	}
	// ----
	if (lpObj->m_nMasterLevel >= m_maxMasterLevel)
	{
		GCServerMsgStringSend(lMsg.Get(1136), lpObj->m_Index, 1);
		return false;
	}
	// ----
	if( bEventMapReward )	//-> New
	{
		iAddExp = iAddExp;	//???
	}
	else
	{
#ifdef GENS
		if( gGensSystem.IsMapBattleZone(lpObj->MapNumber) )	//-> Original g_GensSystem maybe
		{
			iAddExp = iAddExp * (this->m_fAddExpRate + g_MLBattleZoneAddExp);
		}
		else
		{
			iAddExp = iAddExp * this->m_fAddExpRate;
		}
#else
		iAddExp = iAddExp * this->m_fAddExpRate;
#endif
	}
	// ----
	if( lpObj->m_MPSkillOpt.MpsPlusExp > 0 )
	{
		iAddExp += iAddExp * lpObj->m_MPSkillOpt.MpsPlusExp / 100;
	}
	// ----
	if( iAddExp > 0 )
	{
		gObjSetExpPetItem(lpObj->m_Index, iAddExp);
		// ----
		LogAddTD("ML Experience : Map[%d]-(%d,%d) [%s][%s](%d) %I64d %I64d MonsterIndex : %d",	//-> Updated
          lpObj->MapNumber, lpObj->X, lpObj->Y, lpObj->AccountID,lpObj->Name,
          lpObj->m_nMasterLevel, lpObj->m_i64MasterLevelExp, iAddExp, iMonsterType);
		// ----
		if( iAddExp + lpObj->m_i64MasterLevelExp >= lpObj->m_i64NextMasterLevelExp )
		{
			iAddExp = 0;
			// -----
			int m_masterPointsPerLvl = GetPrivateProfileInt("Common", "MasterPointsPerLvl", 100, gDirPath.GetNewPath("MasterSystem.cfg"));
			int numCodeds = 101;
			if (m_maxMasterLevel >= numCodeds)
			{
				int m_masterPointsPerLvl = 1;
			}
			// -----
			lpObj->m_i64MasterLevelExp	= lpObj->m_i64NextMasterLevelExp;
			lpObj->m_nMasterLevel++;
			lpObj->m_iMasterLevelPoint += m_masterPointsPerLvl;	//-> In future can use it for change ml point per level)
			// -----
			gObjCalCharacter(lpObj->m_Index);
			// -----
			lpObj->MaxLife				+= DCInfo.DefClass[ lpObj->Class ].LevelLife;
			lpObj->MaxMana				+= DCInfo.DefClass[ lpObj->Class ].LevelMana;
			lpObj->Life					= lpObj->AddLife + lpObj->MaxLife;
			lpObj->Mana					= lpObj->AddMana + lpObj->MaxMana;
			// -----
			gObjCalcShieldPoint(lpObj);
			lpObj->iShield				= lpObj->iAddShield + lpObj->iMaxShield;
			// -----
			this->gObjNextMLExpCal(lpObj);
			// ----
			gObjCalcMaxLifePower(lpObj->m_Index);
			gObjSetBP(lpObj->m_Index);
			GJSetCharacterInfo(lpObj, lpObj->m_Index, 0, 0);
			this->GCMasterLevelUpInfo(lpObj);
			GCReFillSend(lpObj->m_Index, lpObj->Life, 0xFF, 0, lpObj->iShield);
			GCManaSend(lpObj->m_Index, lpObj->Mana, 0xFF, 0, lpObj->BP);	//-> Original name ->_BP
		}
		else
		{
			lpObj->m_i64MasterLevelExp += iAddExp;
		}
		// ----
		GCSendExp_INT64(lpObj->m_Index, 65535, iAddExp, 0, 0);		
	}
	// ----
	return true;
}

开发者ID:Natzugen，项目名称:test，代码行数:97，代码来源:MasterLevelSystem.cpp

示例3: GetPrivateProfileInt

void cLuckyPenny::Read(char * FilePath)
{	
	this->Enabled = GetPrivateProfileInt("Common", "SCFLuckyPennyEnabled",0, FilePath);

	LogAddTD("[SCFLuckyPenny] - %s file is Loaded",FilePath);
}

开发者ID:ADMTec，项目名称:GameServer，代码行数:6，代码来源:ObjLuckyPenny.cpp

示例4: GetPrivateProfileBool

inline bool GetPrivateProfileBool(    LPCTSTR lpAppName,LPCTSTR lpKeyName,bool nDefault, LPCTSTR lpFileName)
{
    return GetPrivateProfileInt( lpAppName,lpKeyName,nDefault,lpFileName) == 0 ? false : true;
}

开发者ID:motor，项目名称:clock_stimulus，代码行数:4，代码来源:cbUtil.cpp

示例5: GetPrivateProfileInt

int CIniFile::ReadInteger (LPCSTR lpszSection, LPCSTR lpszKey, int iDefault)
{
	// read integer value from ini-file
	return GetPrivateProfileInt (lpszSection, lpszKey, iDefault, m_szFileName);
}

开发者ID:TerrahKitsune，项目名称:TerrahIRC，代码行数:5，代码来源:IniFile.cpp

示例6: WinMain

int WINAPI WinMain( HINSTANCE hInstance,
				   HINSTANCE hPrevInstance,
				   LPSTR lpCmdLine,
				   int nCmdShow )
{
	MSG uMsg;

	memset(&uMsg,0,sizeof(uMsg));

	winClass.lpszClassName = "MY_WINDOWS_CLASS";
	winClass.cbSize = sizeof(WNDCLASSEX);
	winClass.style = CS_HREDRAW | CS_VREDRAW;
	winClass.lpfnWndProc = WndProc;
	winClass.hInstance = hInstance;
	winClass.hIcon = LoadIcon(hInstance, MAKEINTRESOURCE(IDI_ICON1));
	winClass.hIconSm = LoadIcon(hInstance, MAKEINTRESOURCE(IDI_ICON1));
	winClass.hCursor = LoadCursor(NULL, IDC_ARROW);
	winClass.lpszMenuName = MAKEINTRESOURCE(IDC_CV);
	winClass.hbrBackground = (HBRUSH)GetStockObject(BLACK_BRUSH);
	winClass.cbClsExtra = 0;
	winClass.cbWndExtra = 0;

	if( !RegisterClassEx(&winClass) )
		return E_FAIL;

	GetINIPath();

	OpenConsoleWindow = GetPrivateProfileBool("Display", "OpenConsoleWindow", true, IniName);

	if (OpenConsoleWindow)
		OpenConsole();

	pcejin.aspectRatio = GetPrivateProfileBool("Video", "aspectratio", false, IniName);
	pcejin.windowSize = GetPrivateProfileInt("Video", "pcejin.windowSize", 1, IniName);
	
	WndX = GetPrivateProfileInt("Main", "WndX", 0, IniName);
	WndY = GetPrivateProfileInt("Main", "WndY", 0, IniName);
	
	g_hWnd = CreateWindowEx( NULL, "MY_WINDOWS_CLASS",
		pcejin.versionName.c_str(),
		WS_OVERLAPPEDWINDOW | WS_VISIBLE,
		WndX, WndY, 348, 224, NULL, NULL, hInstance, NULL );

	if( g_hWnd == NULL )
		return E_FAIL;

	ScaleScreen((float)pcejin.windowSize);

	soundInit();

	LoadIniSettings();
	InitSpeedThrottle();

	DirectDrawInit();

	InitCustomControls();
	InitCustomKeys(&CustomKeys);
	LoadHotkeyConfig();
	LoadInputConfig();

	DragAcceptFiles(g_hWnd, true);

	extern void Agg_init();
	Agg_init();

	if (osd)  {delete osd; osd =NULL; }
	osd  = new OSDCLASS(-1);

	di_init();

	DWORD wmTimerRes;
	TIMECAPS tc;
	if (timeGetDevCaps(&tc, sizeof(TIMECAPS))== TIMERR_NOERROR)
	{
		wmTimerRes = std::min(std::max(tc.wPeriodMin, (UINT)1), tc.wPeriodMax);
		timeBeginPeriod (wmTimerRes);
	}
	else
	{
		wmTimerRes = 5;
		timeBeginPeriod (wmTimerRes);
	}

	if (KeyInDelayMSec == 0) {
		DWORD dwKeyboardDelay;
		SystemParametersInfo(SPI_GETKEYBOARDDELAY, 0, &dwKeyboardDelay, 0);
		KeyInDelayMSec = 250 * (dwKeyboardDelay + 1);
	}
	if (KeyInRepeatMSec == 0) {
		DWORD dwKeyboardSpeed;
		SystemParametersInfo(SPI_GETKEYBOARDSPEED, 0, &dwKeyboardSpeed, 0);
		KeyInRepeatMSec = (int)(1000.0/(((30.0-2.5)/31.0)*dwKeyboardSpeed+2.5));
	}
	if (KeyInRepeatMSec < (int)wmTimerRes)
		KeyInRepeatMSec = (int)wmTimerRes;
	if (KeyInDelayMSec < KeyInRepeatMSec)
		KeyInDelayMSec = KeyInRepeatMSec;

	hKeyInputTimer = timeSetEvent (KeyInRepeatMSec, 0, KeyInputTimer, 0, TIME_PERIODIC);

//.........这里部分代码省略.........

开发者ID:MANICX100，项目名称:vbjin，代码行数:101，代码来源:main.cpp

示例7: GetPrivateProfileInt

int  CBaseIni::ReadInt( LPCTSTR lpszAppName, LPCTSTR lpszKeyName, int nDefault/*, LPCTSTR lpszFileName = NULL*/ )
{
	return GetPrivateProfileInt( lpszAppName, lpszKeyName, nDefault, m_strFileName.c_str() );
}

开发者ID:sunnet2007，项目名称:vHome，代码行数:4，代码来源:base_ini.cpp

示例8: winSaveCheatListDefault


//.........这里部分代码省略.........
    if(theApp.autoPatch && !patchName.IsEmpty()) {
      int size = gbRomSize;
      applyPatch(patchName, &gbRom, &size);
      if(size != gbRomSize) {
        extern bool gbUpdateSizes();
        gbUpdateSizes();
        gbReset();
        theApp.romSize = size;
      }
    }
  } else {
    int size = CPULoadRom(theApp.szFile);
    if(!size)
      return false;

    theApp.romSize = size;

    flashSetSize(theApp.winFlashSize);
    rtcEnable(theApp.winRtcEnable);
    cpuSaveType = theApp.winSaveType;

    GetModuleFileName(NULL, tempName, 2048);

    char *p = strrchr(tempName, '\\');
    if(p)
      *p = 0;

    char buffer[5];
    strncpy(buffer, (const char *)&rom[0xac], 4);
    buffer[4] = 0;

    strcat(tempName, "\\vba-over.ini");

    UINT i = GetPrivateProfileInt(buffer,
					                "rtcEnabled",
                                  -1,
                                  tempName);
    if(i != (UINT)-1)
      rtcEnable(i == 0 ? false : true);

    i = GetPrivateProfileInt(buffer,
                             "flashSize",
                             -1,
                             tempName);
    if(i != (UINT)-1 && (i == 0x10000 || i == 0x20000))
      flashSetSize((int)i);

    i = GetPrivateProfileInt(buffer,
                             "saveType",
                             -1,
                             tempName);
    if(i != (UINT)-1 && (i <= 5))
      cpuSaveType = (int)i;
    i = GetPrivateProfileInt(buffer,
                             "mirroringEnabled",
                             -1,
                             tempName);
    if(i != (UINT)-1)
      doMirroring (i == 0 ? false : true);

    theApp.emulator = GBASystem;
    /* disabled due to problems
    if(theApp.removeIntros && rom != NULL) {
      *((u32 *)rom)= 0xea00002e;
    }
    */

开发者ID:DBZ89，项目名称:VisualBoyAdvance-Core，代码行数:67，代码来源:MainWnd.cpp

示例9: GetPrivateProfileInt

void ImperialEvent::ImperialLoadConfig()
{	
	char FileName[] = "..//OptionsData//Events//ImperialEvent.ini";
	ImperialConfig.MinimumLevel = GetPrivateProfileInt("ImperialGuardianFort", "ImperialEventReqLevel", 15, FileName);
	ImperialConfig.CheckInvite = GetPrivateProfileInt("ImperialGuardianFort", "ImperialEventCheckPaper", 1, FileName);
}

开发者ID:brunohkbx，项目名称:pendmu-server，代码行数:6，代码来源:ImperialEvent.cpp

示例10: GetPrivateProfileInt

int CConfigManager::GetFontSize()
{
	return GetPrivateProfileInt(m_section.c_str(), FONT_SIZE, 20, m_configFileName.c_str());
}

开发者ID:weimingtom，项目名称:gal-demo，代码行数:4，代码来源:ConfigManager.cpp

示例11: SetIcon

BOOL CUserLoginDlg::OnInitDialog()
{
	CDialogEx::OnInitDialog();
	
	HICON m_hIcon;
	m_hIcon=AfxGetApp()->LoadIcon(IDR_MAINFRAME);//修改对话框的图标
	SetIcon(m_hIcon,TRUE);


	// TODO:  在此添加额外的初始化
	ModifyStyleEx(0,WS_EX_APPWINDOW);
	GetClientRect(&m_rect);
	SetBackgroundColor(RGB(247,252,255));
	//初始化全局变量g_CurrentDir(当前目录绝对路径)
	GetCurrentDirectory(MAX_PATH,g_CurrentDir.GetBuffer(MAX_PATH));
	g_CurrentDir.ReleaseBuffer(); 
	//提取之前保存的用户信息，如果有的话,利用sqlite数据库
	sqlite3* UserInfodb = NULL;
	//打开数据库，不存在则创建
	if(sqlite3_open("User\\UserInfo.db3", &UserInfodb) != 0)
	{
		MessageBox(L"打开用户信息列表失败",L"初始化",MB_ICONERROR);
		return FALSE;
	}
	//创建用户信息表格，已存在则创建失败，错误信息保存在szErrmsg中
	char *sqlcmd = "CREATE TABLE UserInfo(\
				     UserName string PRIMARY KEY,\
					 PassWord string )";

	char *szErrmsg = NULL;
	sqlite3_exec(UserInfodb,sqlcmd,0,0,&szErrmsg);
	//查询用户数据
	char *zsql = "SELECT * FROM UserInfo";
	char **szResult = NULL;
	int nRow = 0;
	int nColumn = 0;
	sqlite3_get_table(UserInfodb,zsql,&szResult,&nRow,&nColumn,&szErrmsg);

	char username[MAX_USERNAMELEN] = {0};
	char passwordEncodeHex[500] = {0};
	char *passwordEncode = NULL;
	memset(username,0,MAX_USERNAMELEN);
	memset(passwordEncodeHex,0,500);
	int l = strlen(szResult[3]);
	if(nRow)
	{
		memcpy(username,szResult[2],strlen(szResult[2]));
		memcpy(passwordEncodeHex,szResult[3],strlen(szResult[3]));
	}

	m_UserIniFilePath = g_CurrentDir;
	m_UserIniFilePath+=L"\\config\\config.ini";
	m_UserName = Char2CString(username);
	m_CheckPW=GetPrivateProfileInt(L"UserSetting",L"SavePassword",0,m_UserIniFilePath);
	if(strlen(passwordEncodeHex))
	{
		//如果密码不为空，则解密
		char *userKey = "1234567887654321"; // 原始密钥128位，16字节
		CString sDataLen;
		GetPrivateProfileString(L"UserSetting",L"PasswordEnCodeLen",L"",sDataLen.GetBuffer(10),10,m_UserIniFilePath);
		int datalen = _wtoi(sDataLen);
		char keyDecode[256]; //解密密钥
		char *PassWordDecoded = NULL;
		//char *dataSrc = NULL; //补齐的数据
		//将转为16进制串的密码转为初始状态

		int L=strlen(passwordEncodeHex);
		passwordEncode = (char*)malloc(sizeof(char)*(L));
		memset(passwordEncode,0,L);
		int  x;
		for(int i=0;i<L/2;i++) 
		{		
			sscanf(passwordEncodeHex+i*2,"%02X",&x);
			passwordEncode[i]=(char)x;//(x&0xFFu);
		}
		unsigned char in[16];
		unsigned char out[16];
		PassWordDecoded = (char*)malloc(sizeof(char)*datalen);
		if(!PassWordDecoded)
		{
			return -1;
		}
		memset(PassWordDecoded,0,datalen);
		//设置解密密钥
		if(0!=AES_set_decrypt_key((const unsigned char *)userKey,128,(AES_KEY *)keyDecode))
		{
			return -1;
		}
		//循环加密，以16字节为单位
		int count = datalen/16;
		//解密
		for(int i = 0;i<count;++i)
		{
			memset(in, 0, 16);             
			memset(out, 0, 16); 	
			memcpy(in,passwordEncode+i*16,16);
			AES_ecb_encrypt(in,out,(AES_KEY *)keyDecode,AES_DECRYPT);
			memcpy(PassWordDecoded+i*16,out,16);
		}
		//初始化密码
//.........这里部分代码省略.........

开发者ID:wth515812076，项目名称:WineAnaSys，代码行数:101，代码来源:UserLoginDlg.cpp

示例12: GetPrivateProfileInt

bool CRtkService::_init()
{
	char serverName[rtkm_node_key_length + 1];

	m_bPending = __true;
	
	PrimaryCheckInterval = GetPrivateProfileInt(
		"PMC",
		"PrimaryCheckInterval",
		500,
		get_config_file()
		);
	if(PrimaryCheckInterval < 50 || PrimaryCheckInterval > 5000){
		utils_error(
			"Warning : PrimaryCheckInterval=%d is invalid, reset to 500.\n",
			PrimaryCheckInterval
			);
		PrimaryCheckInterval = 500;
	}
	MaxPrimaryWatchDogCounter = GetPrivateProfileInt(
		"PMC",
		"PrimaryWatchDogCounter",
		8,
		get_config_file()
		);
	if(MaxPrimaryWatchDogCounter < 3 || MaxPrimaryWatchDogCounter > 50){
		utils_error(
			"Warning : PrimaryWatchDogCounter=%d is invalid, reset to 20.\n",
			PrimaryWatchDogCounter
			);
		MaxPrimaryWatchDogCounter = 8;
	}
	PrimaryWatchDogCounter = MaxPrimaryWatchDogCounter;
	
	m_bPending = __false;

	init_powermgr();

#ifdef _WIN32
	init_spac();//初始化得到security descriptor、mutex对象句柄数组mutics[]和event对象句柄数组events[]
#endif
	
	init_server_shell();//创建g_shell

	init_config();//空函数。。。
	
	GetPrivateProfileString(
		"PMC",
		"ServerName",
		"",
		serverName,
		sizeof(serverName),
		get_config_file()
		);
	//若pmc.ini中没有给出节点名，取本机名为节点名
	if(!serverName[0]){
		DWORD len;
		len = sizeof(serverName);
		GetComputerName(serverName, &len);
	}
	
	//初始化网络，即设定一些值，创建链表g_buses,<bus_id, CRtkVBus*>，并开启5个VBUS线程
	if(!init_network(RTK_INIT_AS_SERVER, serverName)){
		return false;
	}
	//给g_buses中的4个元素的CRtkVBus的成员赋值
	connect_vbus(
		BUSID_RTDB, 
		VBUS_CONNECT_AS_SERVER, 
		on_rtdb, 
		rtdb_filter
		);
	connect_vbus(
		BUSID_SYSTEM, 
		VBUS_CONNECT_AS_SERVER, 
		on_system, 
		server_filter
		);
	connect_vbus(
		BUSID_OPERATION, 
		VBUS_CONNECT_AS_SERVER, 
		on_operation, 
		server_filter
		);
	connect_vbus(
		BUSID_CONFIG, 
		VBUS_CONNECT_AS_SERVER, 
		on_config, 
		server_filter
		);
	utils_trace("Networking Subsystem initialized.\n"); 	

	register_power_callback(power_state_changed, 0);//创建一个CALLBACK_ITEM，用形参给其成员赋值，并链接上RTK_LIST_ENTRY
	// checking primary site
	if(!setup_running_state()){
		return false;
	}	

	setup_rtdb();//在pmc.ini中寻找组名，加载组名对应的*.csv文件中的标签到内存，并开启一个线程。
	utils_trace("Realtime Database Subsystem initialized.\n");
//.........这里部分代码省略.........

开发者ID:george-kuo，项目名称:GoSysWare，代码行数:101，代码来源:rtkserver.cpp

示例13: GetPrivateProfileInt

UINT ConfigManager::ReadInt(char *key, int def)
{
    return GetPrivateProfileInt(APPNAME, key, def, mIniFile);
}

开发者ID:noxdominus，项目名称:httpq2，代码行数:4，代码来源:configmanager.cpp

示例14: TMSRPT29

//
//  Load driver data from an external file into the drivers table
//
BOOL FAR TMSRPT29(TMSRPTPassedDataDef *pPassedData)
{
    BOOL  bOK;
    BOOL  bFileOpen[NUMINPUTFILES];
    BOOL  bFound;
    FILE *fp[NUMINPUTFILES];
    char  blanks[80];
    char  dummy[256];
    char  inputString[256];
    char  inputFiles[NUMINPUTFILES][16];
    char  nodeNumbers[256];
    char *ptr;
    char  routeNumber[ROUTES_NAME_LENGTH + 1];
    char  routeName[ROUTES_NAME_LENGTH + 1];
    char  serviceName[SERVICES_NAME_LENGTH + 1];
    long  directionIndex;
    long  firstTime;
    long  nodeSequence;
    long  PATTERNSrecordID;
    long  ROUTESrecordID;
    long  SERVICESrecordID;
    long  tempLong;
    long  oldCount;
    long  newCount;
    int   nI;
    int   nJ;
    int   rcode2;

    bOK = TRUE;
    memset(blanks, ' ', 80);
    for(nI = 0; nI < NUMINPUTFILES; nI++)
    {
        bFileOpen[nI] = FALSE;
    }
//
//  Give the warning
//
    LoadString(hInst, ERROR_278, tempString, TEMPSTRING_LENGTH);
    if(MessageBox(NULL, tempString, TMS, MB_YESNO | MB_ICONWARNING | MB_DEFBUTTON2) == IDNO)
    {
        bOK = FALSE;
        goto done;
    }
//
//  Get the list of divisions we're going to load
//
//  Number of divisions
//
    numDivisions = GetPrivateProfileInt("TMSRPT29", "numDivisions", 0, TMSINIFile);
    if(numDivisions == 0)
    {
        LoadString(hInst, ERROR_273, tempString, TEMPSTRING_LENGTH);
        MessageBox(NULL, tempString, TMS, MB_OK);
        bOK = FALSE;
        goto done;
    }
//
//  Did we exceed the max?
//
    if(numDivisions > MAXDIVISIONS)
    {
        LoadString(hInst, ERROR_274, tempString, TEMPSTRING_LENGTH);
        MessageBox(NULL, tempString, TMS, MB_OK);
        bOK = FALSE;
        goto done;
    }
//
//  Loop through the divisions?
//
    for(nI = 0; nI < numDivisions; nI++)
    {
        sprintf(tempString, "DivisionNumber%02d", nI);
        divisionList[nI] = GetPrivateProfileInt("TMSRPT29", tempString, NO_RECORD, TMSINIFile);
        if(divisionList[nI] == NO_RECORD)
        {
            LoadString(hInst, ERROR_275, szFormatString, sizeof(szFormatString));
            sprintf(szarString, szFormatString, tempString);
            MessageBox(NULL, szarString, TMS, MB_OK);
            bOK = FALSE;
            goto done;
        }
        sprintf(tempString, "DivisionName%02d", nI);
        GetPrivateProfileString("TMSRPT29", tempString, "",
                                szarString, sizeof(szarString), TMSINIFile);
//
//  Set up the Divisions Table
//
        rcode2 = btrieve(B_GETLAST, TMS_DIVISIONS, &DIVISIONS, &DIVISIONSKey0, 0);
        DIVISIONS.recordID = AssignRecID(rcode2, DIVISIONS.recordID);
        DIVISIONS.COMMENTSrecordID = NO_RECORD;
        DIVISIONS.number = divisionList[nI];
        strncpy(DIVISIONS.name, szarString, DIVISIONS_NAME_LENGTH);
        pad(DIVISIONS.name, DIVISIONS_NAME_LENGTH);
        memset(DIVISIONS.reserved, 0x00, DIVISIONS_RESERVED_LENGTH);
        DIVISIONS.flags = 0;
        rcode2 = btrieve(B_INSERT, TMS_DIVISIONS, &DIVISIONS, &DIVISIONSKey0, 0);
//
//.........这里部分代码省略.........

开发者ID:ems，项目名称:TMS，代码行数:101，代码来源:Tmsrpt29.c

示例15: GetPrivateProfileInt

int IniReader::ReadInteger(char* szSection, char* szKey, int iDefaultValue)
{
	int iResult = GetPrivateProfileInt(szSection,  szKey, iDefaultValue, m_szFileName); 
	return iResult;
}

开发者ID:cret91，项目名称:metin2-open-file-manager，代码行数:5，代码来源:ConfigurationHandler.cpp

示例16: GetModuleIniPath

BOOL CSyoboiCalUtil::SendReserve(vector<RESERVE_DATA*>* reserveList, vector<TUNER_RESERVE_INFO>* tunerList)
{
	if( reserveList == NULL || tunerList == NULL ){
		return FALSE;
	}
	if( reserveList->size() == 0 ){
		return FALSE;
	}

	wstring iniAppPath = L"";
	GetModuleIniPath(iniAppPath);
	if( GetPrivateProfileInt(L"SYOBOI", L"use", 0, iniAppPath.c_str()) == 0 ){
		return FALSE;
	}
	_OutputDebugString(L"★SyoboiCalUtil:SendReserve");

	wstring textPath;
	GetModuleFolderPath(textPath);
	textPath += L"\\SyoboiCh.txt";
	CParseServiceChgText srvChg;
	srvChg.ParseText(textPath.c_str());

	SAFE_DELETE(this->proxyInfo);
	WCHAR buff[512] = L"";
	int length = 0;
	BOOL useProxy = (BOOL)GetPrivateProfileInt(L"SYOBOI", L"useProxy", 0, iniAppPath.c_str());
	if( useProxy == TRUE ){
		this->proxyInfo = new USE_PROXY_INFO;

		GetPrivateProfileString(L"SYOBOI", L"ProxyServer", L"", buff, 512, iniAppPath.c_str());
		this->proxyInfo->serverName = new WCHAR[wcslen(buff)+1];
		wcscpy_s(this->proxyInfo->serverName, wcslen(buff)+1, buff);

		ZeroMemory(buff, (sizeof(WCHAR)*512));
		GetPrivateProfileString(L"SYOBOI", L"ProxyID", L"", buff, 512, iniAppPath.c_str());
		length = (int)wcslen(buff);
		if( length > 0 ){
			this->proxyInfo->userName = new WCHAR[length+1];
			wcscpy_s(this->proxyInfo->userName, length+1, buff);
		}else{
			this->proxyInfo->userName = NULL;
		}

		ZeroMemory(buff, (sizeof(WCHAR)*512));
		GetPrivateProfileString(L"SYOBOI", L"ProxyPWD", L"", buff, 512, iniAppPath.c_str());
		length = (int)wcslen(buff);
		if( length > 0 ){
			this->proxyInfo->password = new WCHAR[length+1];
			wcscpy_s(this->proxyInfo->password, length+1, buff);
		}else{
			this->proxyInfo->password = NULL;
		}

	}

	ZeroMemory(buff, (sizeof(WCHAR)*512));
	GetPrivateProfileString(L"SYOBOI", L"userID", L"", buff, 512, iniAppPath.c_str());
	this->id=buff;

	ZeroMemory(buff, (sizeof(WCHAR)*512));
	GetPrivateProfileString(L"SYOBOI", L"PWD", L"", buff, 512, iniAppPath.c_str());
	this->pass=buff;

	int slot = GetPrivateProfileInt(L"SYOBOI", L"slot", 0, iniAppPath.c_str());

	ZeroMemory(buff, (sizeof(WCHAR)*512));
	GetPrivateProfileString(L"SYOBOI", L"devcolors", L"", buff, 512, iniAppPath.c_str());
	wstring devcolors=buff;
	
	ZeroMemory(buff, (sizeof(WCHAR)*512));
	GetPrivateProfileString(L"SYOBOI", L"epgurl", L"", buff, 512, iniAppPath.c_str());
	wstring epgurl=buff;

	if( this->id.size() == 0 ){
		_OutputDebugString(L"★SyoboiCalUtil:NoUserID");
		return FALSE;
	}

	//Authorization
	wstring auth = L"";
	auth = this->id;
	auth += L":";
	auth += this->pass;
	string authA;
	WtoA(auth, authA);

	DWORD destSize = 0;
	Base64Enc(authA.c_str(), (DWORD)authA.size(), NULL, &destSize);
	WCHAR* base64 = new WCHAR[destSize];
	ZeroMemory(base64, destSize*sizeof(WCHAR));
	Base64Enc(authA.c_str(), (DWORD)authA.size(), base64, &destSize);

	wstring authHead = L"";
	Format(authHead, L"Authorization: Basic %s\r\nContent-type: application/x-www-form-urlencoded\r\n", base64);

	//data
	wstring dataParam;
	wstring param;
	map<DWORD, wstring> tunerMap;
	for( size_t i=0; i<tunerList->size(); i++ ){
//.........这里部分代码省略.........

开发者ID:HK323232，项目名称:EDCB，代码行数:101，代码来源:SyoboiCalUtil.cpp

示例17: GetPrivateProfileInt

int CZQIniFile::ReadInteger(char* szSection, char* szKey, int iDefaultValue)
{
    int iResult = GetPrivateProfileInt((LPCSTR)szSection, (LPCSTR)szKey, iDefaultValue, (LPCSTR)m_szFileName);
    return iResult;
}

开发者ID:mikesimb，项目名称:SkinDemo_1，代码行数:5，代码来源:ZQIniFile.cpp

示例18: GetPrivateProfileInt

int Ini::ReadInt(const char* key, int defaultValue, const char* section) const
{
	return GetPrivateProfileInt(GetSection(section), key, defaultValue, _fname.c_str());
}

开发者ID:alanlei，项目名称:sp_server，代码行数:4，代码来源:ini.cpp

示例19: myGetProfileInt

UINT WINAPI myGetProfileInt(LPCTSTR lpAppName, LPCTSTR lpKeyName, INT nDefault)
{
  return GetPrivateProfileInt(lpAppName, lpKeyName, nDefault, pszFilename);
}

开发者ID:kichik，项目名称:nsis-1，代码行数:4，代码来源:InstallerOptions.cpp

示例20: IniFileRead

extern int IniFileRead(TCHAR *ass_type, ass_setting_t *as)
{
    int ret = -1;

    // Allocate string buffers.
    TCHAR *ini_file = new TCHAR[FILE_PATH_MAX];
    TCHAR *tmp_buff = new TCHAR[INI_STRING_MAX];
    WCHAR *utf8_str = new WCHAR[INI_STRING_MAX];
    if (!ini_file || !tmp_buff || !utf8_str)
        goto EXIT;
    // Initliaze string buffers.
    memset(ini_file, 0, sizeof(TCHAR) * FILE_PATH_MAX);
    memset(tmp_buff, 0, sizeof(TCHAR) * INI_STRING_MAX);
    memset(utf8_str, 0, sizeof(WCHAR) * INI_STRING_MAX);

    // Get the file path of ini file.
    if (GetPrivateProfilePath(ini_file))
        goto EXIT;
    // Open ini file.
    FILE *fp = NULL;
    if (_tfopen_s(&fp, ini_file, _T("r")) || !fp) {
        if (_tfopen_s(&fp, ini_file, _T("wb")) || !fp)
            goto EXIT;
        fprintf(fp, "%s", DEFAULT_INI);
    }
    fclose(fp);

    // Caption offset of SWF-Mode
    as->SWF0offset=GetPrivateProfileInt(_T("SWFModeOffset"), _T("SWF0offset"), 0, ini_file);
    as->SWF5offset=GetPrivateProfileInt(_T("SWFModeOffset"), _T("SWF5offset"), 0, ini_file);
    as->SWF7offset=GetPrivateProfileInt(_T("SWFModeOffset"), _T("SWF7offset"), 0, ini_file);
    as->SWF9offset=GetPrivateProfileInt(_T("SWFModeOffset"), _T("SWF9offset"), 0, ini_file);
    as->SWF11offset=GetPrivateProfileInt(_T("SWFModeOffset"), _T("SWF11offset"), 0, ini_file);

    // ass header infomation
#define GET_INI_STRING(sec, key, def, tmp, str, len, ini, get)      \
do {                                                                \
    GetPrivateProfileString(sec, key, def, tmp, len, ini);          \
    MultiByteToWideChar(932, 0, tmp, -1, str, len);                 \
    WideCharToMultiByte(CP_UTF8, 0, str, -1, get, len, NULL, NULL); \
} while (0)
#define GET_INI_VALUE(sec, key, def, ini, get)          \
do {                                                    \
    get = GetPrivateProfileInt(sec, key, def, ini);     \
} while (0)

    GET_INI_STRING(ass_type, _T("Comment1"), NULL, tmp_buff, utf8_str, INI_STRING_MAX, ini_file, as->Comment1);
    GET_INI_STRING(ass_type, _T("Comment2"), NULL, tmp_buff, utf8_str, INI_STRING_MAX, ini_file, as->Comment2);
    GET_INI_STRING(ass_type, _T("Comment3"), NULL, tmp_buff, utf8_str, INI_STRING_MAX, ini_file, as->Comment3);
    GET_INI_VALUE(ass_type, _T("PlayResX"), 1920, ini_file, as->PlayResX);
    GET_INI_VALUE(ass_type, _T("PlayResY"), 1080, ini_file, as->PlayResY);

    GET_INI_STRING(ass_type, _T("DefaultFontname"), _T("MS UI Gothic"), tmp_buff, utf8_str, INI_STRING_MAX, ini_file, as->DefaultFontname);
    GET_INI_VALUE(ass_type, _T("DefaultFontsize"), 90, ini_file, as->DefaultFontsize);
    GET_INI_STRING(ass_type, _T("DefaultStyle"), _T("&H00FFFFFF,&H000000FF,&H00000000,&H00000000,0,0,0,0,100,100,15,0,1,2,2,1,10,10,10,0")
                 , tmp_buff, utf8_str, INI_STRING_MAX, ini_file, as->DefaultStyle);

    GET_INI_STRING(ass_type, _T("BoxFontname"), _T("MS UI Gothic"), tmp_buff, utf8_str, INI_STRING_MAX, ini_file, as->BoxFontname);
    GET_INI_VALUE(ass_type, _T("BoxFontsize"), 90, ini_file, as->BoxFontsize);
    GET_INI_STRING(ass_type, _T("BoxStyle"), _T("&HFFFFFFFF,&H000000FF,&H00FFFFFF,&H00FFFFFF,0,0,0,0,100,100,0,0,1,2,2,2,10,10,10,0")
                 , tmp_buff, utf8_str, INI_STRING_MAX, ini_file, as->BoxStyle);

    GET_INI_STRING(ass_type, _T("RubiFontname"), _T("MS UI Gothic"), tmp_buff, utf8_str, INI_STRING_MAX, ini_file, as->RubiFontname);
    GET_INI_VALUE(ass_type, _T("RubiFontsize"), 50, ini_file, as->RubiFontsize);
    GET_INI_STRING(ass_type, _T("RubiStyle"), _T("&H00FFFFFF,&H000000FF,&H00000000,&H00000000,0,0,0,0,100,100,0,0,1,2,2,1,10,10,10,0")
                 , tmp_buff, utf8_str, INI_STRING_MAX, ini_file, as->RubiStyle);

#undef GET_INI_STRING
#undef GET_INI_VALUE

    ret = 0;
EXIT:
    SAFE_DELETE_ARRAY(ini_file);
    SAFE_DELETE_ARRAY(tmp_buff);
    SAFE_DELETE_ARRAY(utf8_str);

    return ret;
}

开发者ID:myfingerhurt，项目名称:Caption2Ass_PCR，代码行数:78，代码来源:IniFile.cpp

注：本文中的GetPrivateProfileInt函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ GetPrivateProfileString函数代码示例发布时间：2022-05-30

C++ GetPriorityClass函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18272|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9677|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8179|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8549|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8457|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9393|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8430|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7865|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8415|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ GetPrivateProfileInt函数代码示例

示例1: ConfigExperimentFromFile

示例2: GetPrivateProfileInt

示例3: GetPrivateProfileInt

示例4: GetPrivateProfileBool

示例5: GetPrivateProfileInt

示例6: WinMain

示例7: GetPrivateProfileInt

示例8: winSaveCheatListDefault

示例9: GetPrivateProfileInt

示例10: GetPrivateProfileInt

示例11: SetIcon

示例12: GetPrivateProfileInt

示例13: GetPrivateProfileInt

示例14: TMSRPT29

示例15: GetPrivateProfileInt

示例16: GetModuleIniPath

示例17: GetPrivateProfileInt

示例18: GetPrivateProfileInt

示例19: myGetProfileInt

示例20: IniFileRead

请发表评论

全部评论

上一篇：

下一篇：

creativetimofficial/material-dashboard-r

CVE-2022-30517

pngwn/MDsveX: A markdown preprocessor fo

kubernetes/examples: Kubernetes applicat

中国4a广告公司100强图谱

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053