C++ GetPropertyData函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中GetPropertyData函数的典型用法代码示例。如果您正苦于以下问题：C++ GetPropertyData函数的具体用法？C++ GetPropertyData怎么用？C++ GetPropertyData使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了GetPropertyData函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: theAddress

void	CAHALAudioDevice::GetStereoPanControlChannels(AudioObjectPropertyScope inScope, UInt32 inChannel, UInt32& outLeftChannel, UInt32& outRightChannel) const
{
	CAPropertyAddress theAddress(kAudioDevicePropertyStereoPanChannels, inScope, inChannel);
	UInt32 theValue[2] = { 0, 0 };
	UInt32 theSize = 2 * sizeof(UInt32);
	GetPropertyData(theAddress, 0, NULL, theSize, theValue);
	outLeftChannel = theValue[0];
	outRightChannel = theValue[1];
}

开发者ID:11020156，项目名称:SampleCode，代码行数:9，代码来源:CAHALAudioDevice.cpp

示例2: theAddress

CFStringRef	CAHALAudioDevice::CopyDataDestinationNameForID(AudioObjectPropertyScope inScope, UInt32 inChannel, UInt32 inID) const
{
	CAPropertyAddress theAddress(kAudioDevicePropertyPlayThruDestinationNameForIDCFString, inScope, inChannel);
	CFStringRef theAnswer = NULL;
	AudioValueTranslation theTranslation = { &inID, sizeof(UInt32), &theAnswer, sizeof(CFStringRef) };
	UInt32 theSize = sizeof(AudioValueTranslation);
	GetPropertyData(theAddress, 0, NULL, theSize, &theTranslation);
	return theAnswer;
}

开发者ID:Michael-Lfx，项目名称:iOS，代码行数:9，代码来源:CAHALAudioDevice.cpp

示例3: sizeof

AudioObjectID	CAHALAudioSystemObject::GetAudioPlugInForBundleID(CFStringRef inUID) const
{
	AudioObjectID theAnswer = kAudioObjectUnknown;
	AudioValueTranslation theValue = { &inUID, sizeof(CFStringRef), &theAnswer, sizeof(AudioObjectID) };
	CAPropertyAddress theAddress(kAudioHardwarePropertyPlugInForBundleID);
	UInt32 theSize = sizeof(AudioValueTranslation);
	GetPropertyData(theAddress, 0, NULL, theSize, &theValue);
	return theAnswer;
}

开发者ID:11020156，项目名称:SampleCode，代码行数:9，代码来源:CAHALAudioSystemObject.cpp

示例4: sizeof

void	CAAudioHardwareStream::GetAvailableDataSources(UInt32& ioNumberSources, UInt32* outSources) const
{
	UInt32 theNumberSources = std::min(GetNumberAvailableDataSources(), ioNumberSources);
	UInt32 theSize = theNumberSources * sizeof(UInt32);
	GetPropertyData(0, kAudioDevicePropertyDataSources, theSize, outSources);
	ioNumberSources = theSize / sizeof(UInt32);
	UInt32* theFirstItem = &(outSources[0]);
	UInt32* theLastItem = theFirstItem + ioNumberSources;
	std::sort(theFirstItem, theLastItem);
}

开发者ID:NikolaiUgelvik，项目名称:sooperlooper，代码行数:10，代码来源:CAAudioHardwareStream.cpp

示例5: CA4CCToCString

	void Control::Show() const
	{
		// Make a string for the class ID
		char classID[] = CA4CCToCString(mClassID);
		
		// Get the object's name
		PropertyAddress address(kCMIOObjectPropertyName, kCMIOObjectPropertyScopeGlobal, kCMIOObjectPropertyElementMaster);
		CFStringRef cfname = NULL;
		UInt32 dataUsed = 0;
		try
		{
			GetPropertyData(address, 0, NULL, sizeof(CFStringRef), dataUsed, &cfname);
		}
		catch(...)
		{
			cfname = NULL;
		}
		
		// Make a C string out of the name
		char name[256];
		name[0] = 0;
		if (cfname != NULL)
		{
			CFIndex length = 0;
			CFRange range = { 0, CFStringGetLength(cfname) };
			CFStringGetBytes(cfname, range, kCFStringEncodingUTF8, 0, false, (UInt8*)name, 255, &length);
			name[length] = 0;
			CFRelease(cfname);
		}
		
		// Get a string for the scope
		const char* scope = NULL;
		switch (GetPropertyScope())
		{
			case kCMIODevicePropertyScopeInput:
				scope = "Input";
				break;
			
			case kCMIODevicePropertyScopeOutput:
				scope = "Output";
				break;
			
			case kCMIODevicePropertyScopePlayThrough:
				scope = "Play Through";
				break;
			
			case kCMIOObjectPropertyScopeGlobal:
			default:
				scope = "Global";
				break;
		};
		
		// Print the information to the standard output
		printf("CMIOObjectID:\t\t0x%lX\n\tCMIOClassID:\t'%s'\n\tName:\t\t\t%s\n\tScope:\t\t\t%s\n\tChannel:\t\t%lu\n", (long unsigned int)mObjectID, classID, name, scope, (long unsigned int)GetPropertyElement());
	}

开发者ID:AdamDiment，项目名称:CocoaSampleCode，代码行数:55，代码来源:CMIO_DP_Control.cpp

示例6: sizeof

	void Device::GetStreams(CMIOObjectPropertyScope scope, UInt32& ioNumberStreams, CMIOStreamID* streamList) const
	{
		ioNumberStreams = std::min(GetNumberStreams(scope), ioNumberStreams);
		UInt32 size = ioNumberStreams * sizeof(CMIOStreamID);
		UInt32 dataUsed = 0;
		GetPropertyData(PropertyAddress(kCMIODevicePropertyStreams, scope), 0, NULL, size, dataUsed, streamList);
		ioNumberStreams = size / sizeof(CMIOStreamID);
		CMIOStreamID* firstItem = &(streamList[0]);
		CMIOStreamID* lastItem = firstItem + ioNumberStreams;
		std::sort(firstItem, lastItem);
	}

开发者ID:AdamDiment，项目名称:CocoaSampleCode，代码行数:11，代码来源:CMIO_DALA_Device.cpp

示例7: HasProperty

	bool Device::IsAlive() const
	{
		bool answer = HasProperty(PropertyAddress(kCMIODevicePropertyDeviceIsAlive));
		if (answer)
		{
			UInt32 isAlive = 0;
			UInt32 dataUsed = 0;
			GetPropertyData(PropertyAddress(kCMIODevicePropertyDeviceIsAlive), 0, NULL, sizeof(UInt32), dataUsed, &isAlive);
			answer = isAlive != 0;
		}
		return answer;
	}

开发者ID:AdamDiment，项目名称:CocoaSampleCode，代码行数:12，代码来源:CMIO_DALA_Device.cpp

示例8: GetNumberDevices

AudioDeviceID	CAAudioHardwareSystem::GetDeviceAtIndex(UInt32 inIndex)
{
	AudioDeviceID theAnswer = 0;
	UInt32 theNumberDevices = GetNumberDevices();
	if((theNumberDevices > 0) && (inIndex < theNumberDevices))
	{
		CAAutoArrayDelete<AudioDeviceID> theDeviceList(theNumberDevices);
		UInt32 theSize = theNumberDevices * sizeof(AudioDeviceID);
		GetPropertyData(kAudioHardwarePropertyDevices, theSize, theDeviceList);
		theAnswer = theDeviceList[inIndex];
	}
	return theAnswer;
}

开发者ID:BitMax，项目名称:openitg，代码行数:13，代码来源:CAAudioHardwareSystem.cpp

示例9: GetNumberItems

	UInt32 SelectorControl::GetItemIDForIndex(UInt32 inItemIndex) const
	{
		UInt32 answer = 0xFFFFFFFF;	// Default to the featuring being on
		UInt32 numberOfItems = GetNumberItems();
		if (numberOfItems > 0)
		{
			ThrowIf(inItemIndex >= numberOfItems, CAException(kCMIOHardwareIllegalOperationError), "SelectorControl::GetItemIDForIndex: index out of range");			
			CAAutoArrayDelete<UInt32> itemList(numberOfItems);
			UInt32 size = numberOfItems * sizeof(CMIODeviceID);
			UInt32 dataUsed = 0;
			GetPropertyData(PropertyAddress(kCMIOSelectorControlPropertyAvailableItems),0, NULL, size, dataUsed, itemList);
			answer = itemList[inItemIndex];
		}
		return answer;
	}

开发者ID:AdamDiment，项目名称:CocoaSampleCode，代码行数:15，代码来源:CMIO_DALA_Control.cpp

示例10: address

	UInt32 Device::GetTotalNumberChannels(CMIOObjectPropertyScope scope) const
	{
		UInt32 answer = 0;
		#warning Device::GetTotalNumberChannels() needs to be implemented
		PropertyAddress address(kCMIODevicePropertyStreamConfiguration, scope);
		UInt32 size = GetPropertyDataSize(address, 0, NULL);
		CAAutoFree<CMIODeviceStreamConfiguration> streamConfiguration(size);
		UInt32 dataUsed = 0;
		GetPropertyData(address, 0, NULL, size, dataUsed, streamConfiguration);

		for(UInt32 index = 0; index < streamConfiguration->mNumberStreams; ++index)
		{
			answer += streamConfiguration->mNumberChannels[index];
		}
		return answer;
	}

开发者ID:AdamDiment，项目名称:CocoaSampleCode，代码行数:16，代码来源:CMIO_DALA_Device.cpp

示例11: theAddress

AudioClassID	CAHALAudioObject::GetClassID() const
{
	//	set up the return value
	AudioClassID theAnswer = 0;
	
	//	set up the property address
	CAPropertyAddress theAddress(kAudioObjectPropertyClass);
	
	//	make sure the property exists
	if(HasProperty(theAddress))
	{
		UInt32 theSize = sizeof(AudioClassID);
		GetPropertyData(theAddress, 0, NULL, theSize, &theAnswer);
	}
	
	return theAnswer;
}

开发者ID:NikolaiUgelvik，项目名称:sooperlooper，代码行数:17，代码来源:CAHALAudioObject.cpp

示例12: GetPropertyData

OSStatus
PA_Stream::GetProperty(UInt32 inChannel,
		       AudioDevicePropertyID inPropertyID,
		       UInt32 *ioPropertyDataSize,
		       void *outPropertyData)
{
	AudioObjectPropertyAddress addr;
	
	addr.mSelector = inPropertyID;
	addr.mElement = inChannel;
	addr.mScope = 0;
	
	if (!HasProperty(&addr))
		return kAudioHardwareUnknownPropertyError;
	
	return GetPropertyData(&addr, 0, NULL, ioPropertyDataSize, outPropertyData);
}

开发者ID:artisdom，项目名称:PulseAudioOSX，代码行数:17，代码来源:PA_Stream.cpp

示例13: GetClassID

	//-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
	// Control::GetVariant()
	//-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
	UInt32 Control::GetVariant() const
	{
		// Setup the answer
		CMIOObjectPropertyElement answer = GetClassID();
		
		// Setup the property address
		PropertyAddress address(kCMIOControlPropertyVariant);
		
		// Make sure the property exists
		if (HasProperty(address))
		{
			// Get the property data
			UInt32 dataUsed = 0;
			GetPropertyData(address, 0, NULL, sizeof(UInt32), dataUsed, &answer);
		}
		
		return answer;
	}

开发者ID:AdamDiment，项目名称:CocoaSampleCode，代码行数:21，代码来源:CMIO_DALA_Control.cpp

示例14: address

	//-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
	// Control::GetPropertyScope()
	//	Get the CMIOObjectPropertyScope IN THE OWNING CMIOObject that contains the control.  (Controls themselves only have kCMIOObjectPropertyScopeGlobal)
	//-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
	CMIOObjectPropertyScope Control::GetPropertyScope() const
	{
		// Setup the answer
		CMIOObjectPropertyScope answer = kCMIOObjectPropertyScopeGlobal;
		
		// Setup the property address
		PropertyAddress address(kCMIOControlPropertyScope);
		
		// Make sure the property exists
		if (HasProperty(address))
		{
			// Get the property data
			UInt32 dataUsed = 0;
			GetPropertyData(address, 0, NULL, sizeof(CMIOObjectPropertyScope), dataUsed, &answer);
		}
		
		return answer;
	}

开发者ID:AdamDiment，项目名称:CocoaSampleCode，代码行数:22，代码来源:CMIO_DALA_Control.cpp

示例15: if

AudioDeviceID	CAAudioHardwareSystem::GetDefaultDevice(bool inIsInput, bool inIsSystem)
{
	AudioDeviceID theAnswer = 0;
	AudioHardwarePropertyID thePropertyID = 0;
	if(inIsInput)
	{
		thePropertyID = kAudioHardwarePropertyDefaultInputDevice;
	}
	else if(inIsSystem)
	{
		thePropertyID = kAudioHardwarePropertyDefaultSystemOutputDevice;
	}
	else
	{
		thePropertyID = kAudioHardwarePropertyDefaultOutputDevice;
	}
	UInt32 theSize = sizeof(AudioDeviceID);
	GetPropertyData(thePropertyID, theSize, &theAnswer);
	return theAnswer;
}

开发者ID:BitMax，项目名称:openitg，代码行数:20，代码来源:CAAudioHardwareSystem.cpp

注：本文中的GetPropertyData函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ GetProtocol函数代码示例发布时间：2022-05-30

C++ GetProperty函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18273|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9677|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8179|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8549|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8457|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9393|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8430|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7865|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8415|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ GetPropertyData函数代码示例

示例1: theAddress

示例2: theAddress

示例3: sizeof

示例4: sizeof

示例5: CA4CCToCString

示例6: sizeof

示例7: HasProperty

示例8: GetNumberDevices

示例9: GetNumberItems

示例10: address

示例11: theAddress

示例12: GetPropertyData

示例13: GetClassID

示例14: address

示例15: if

请发表评论

全部评论

上一篇：

下一篇：

dustinvtran/ml-videos: A collection of v

delphi线程使用

ravikumar001/maven

更的笔顺,体会更的笔画,理会更的部首

ceejbot/LOUDBOT: AUTOMATED SHOUTING FOR

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053