C++ GetViewByName函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中GetViewByName函数的典型用法代码示例。如果您正苦于以下问题：C++ GetViewByName函数的具体用法？C++ GetViewByName怎么用？C++ GetViewByName使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了GetViewByName函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: zwTZCMRPTD_RefreshAllComponents

zOPER_EXPORT zSHORT OPERATION
zwTZCMRPTD_RefreshAllComponents( zVIEW vSubtask )
{
   zVIEW    vTZCMLPLO;
   zVIEW    vTZCMRPTO;
   zVIEW    vCompList;
   zCHAR    szName[ 33 ];
   zCHAR    szERR_Msg[ 254 ];

   if ( GetViewByName( &vTZCMRPTO, "TZCMRPTO", vSubtask, zLEVEL_TASK ) > 0 )
      DropObjectInstance( vTZCMRPTO );

   if ( zwTZCMLPLD_OptionRefreshFromRepo( vSubtask, &vTZCMLPLO,
                                          szName, zRefreshLPLR ) < 0 )
   {
      return( -1 );
   }

   zstrcpy( szERR_Msg, "Project '" );
   GetStringFromAttribute( &szERR_Msg[ zstrlen( szERR_Msg ) ], vTZCMLPLO,
                           "LPLR", "Name" );
   zstrcat( szERR_Msg, "' has been successfully refreshed." );
   MessageSend( vSubtask, "CM00279", "Configuration Management",
                szERR_Msg,
                zMSGQ_OBJECT_CONSTRAINT_INFORMATION, zBEEP );

   if ( GetViewByName( &vCompList, "CompList", vSubtask, zLEVEL_TASK ) >= 0 )
      RefreshWindow( vCompList );

   return( 0 );
} // zwTZCMRPTD_RefreshAllComponents

开发者ID:arksoftgit，项目名称:10c，代码行数:31，代码来源:tzcmrptd.c

示例2: zwTZERRORD_WriteErrorMsg

/////////////////////////////////////////////////////////////////////////////
//
//    OPERATION: zwTZERRORD_WriteErrorMsg
//
//
/////////////////////////////////////////////////////////////////////////////
zOPER_EXPORT zSHORT /*LOCAL */  OPERATION
zwTZERRORD_WriteErrorMsg( zVIEW  vSubtask,
                          zVIEW  vMetaView,
                          zPCHAR szMetaEntity,
                          zPCHAR szMetaAttribute,
                          zPCHAR szErrorMsg,
                          zSHORT nError )
{
   zVIEW  vTZERROR;
   zCHAR  szMsg[ 255 ];

   if ( GetViewByName( &vTZERROR, "TZERROR", vSubtask, zLEVEL_TASK ) < 0 )
   {
      zwTZERRORD_LoadErrorList( vSubtask );
      GetViewByName( &vTZERROR, "TZERROR", vSubtask, zLEVEL_TASK );
   }

   CreateEntity( vTZERROR, "ErrorMsg", zPOS_LAST );
   SetAttributeFromAttribute( vTZERROR, "ErrorMsg", "Name",
                              vMetaView, szMetaEntity, szMetaAttribute );

   if ( nError == 1 )
      zstrcpy( szMsg, "Error:   " );
   else
   if ( nError == 0 )
      zstrcpy( szMsg, "Warning:   " );

   zstrcat( szMsg, szErrorMsg );

   SetAttributeFromString( vTZERROR, "ErrorMsg", "ErrorText", szMsg );
   SetAttributeFromInteger( vTZERROR, "ErrorMsg", "Error", nError );
   return( 0 );

} // zwTZERRORD_WriteErrorMsg

开发者ID:arksoftgit，项目名称:10c，代码行数:40，代码来源:tzerrord.c

示例3: zwTZVSDBAD_StepOnce

zOPER_EXPORT zSHORT OPERATION
zwTZVSDBAD_StepOnce( zVIEW    vSubtask )
{
   zVIEW    XPG;
   zVIEW    lpZeidonVML;
   zVIEW    vStatementView;
   zLONG    lStepCode;
   zSHORT   nZRetCode;
   zSHORT   RESULT;
   zLONG    lTempInteger_0;

   lStepCode = Exec_StepOnce( vSubtask );
   if ( lStepCode == zXC_OPERATION_EXECUTED )
   {
      nZRetCode = zwTZVSDBAD_Resume( vSubtask );
      nZRetCode = SetWindowActionBehavior( vSubtask, zWAB_ReturnToParentWithRefresh, "", "" );
      return( -1 );
   }

   nZRetCode = GetViewByName( &lpZeidonVML, "ZeidonVML", vSubtask, zLEVEL_TASK );
   nZRetCode = GetViewByName( &XPG, "XPG", lpZeidonVML, zLEVEL_SUBTASK );
   nZRetCode = SetNameForView( XPG, "XPG", vSubtask, zLEVEL_SUBTASK );
   nZRetCode = GetViewByName( &vStatementView, "StatementView", lpZeidonVML, zLEVEL_SUBTASK );
   nZRetCode = GetIntegerFromAttribute( &lTempInteger_0, vStatementView, "Statement", "RelativeLineNumber" );
   RESULT = SetCursorFirstEntityByInteger( XPG, "OperationText", "RelativeLineNumber", lTempInteger_0, "" );
   return( 0 );
}

开发者ID:DeegC，项目名称:ZeidonTools，代码行数:27，代码来源:tzvsdbad.c

示例4: zwTZVSDBAD_Update

zOPER_EXPORT zSHORT OPERATION
zwTZVSDBAD_Update( zVIEW    vSubtask )
{
   zVIEW    StackObject;
   zVIEW    XPG;
   zVIEW    lpZeidonVML;
   zSHORT   nZRetCode;
   zSHORT   RESULT;
   zLONG    lTempInteger_0;

   nZRetCode = GetViewByName( &lpZeidonVML, "ZeidonVML", vSubtask, zLEVEL_TASK );
   nZRetCode = GetViewByName( &XPG, "XPG", lpZeidonVML, zLEVEL_SUBTASK );
   nZRetCode = GetViewByName( &StackObject, "StackObject", vSubtask, zLEVEL_SUBTASK );
   nZRetCode = GetIntegerFromAttribute( &lTempInteger_0, StackObject, "Variable", "ID" );
   RESULT = SetCursorFirstEntityByInteger( XPG, "Variable", "ID", lTempInteger_0, "" );
   if ( CompareAttributeToInteger ( XPG, "Variable", "DataType", 1045 ) != 0 )
   {
      nZRetCode = SetWindowActionBehavior( vSubtask, zWAB_StartModalSubwindow, "TZVSDBAD", "UPDATEVAR" );
   }
   else
   {
      zwTZVSDBAD_SpawnObjectBrowser( vSubtask );
   }

   return( 0 );
}

开发者ID:DeegC，项目名称:ZeidonTools，代码行数:26，代码来源:tzvsdbad.c

示例5: zwTZVSDBAD_SpawnObjectBrowser

zOPER_EXPORT zSHORT OPERATION
zwTZVSDBAD_SpawnObjectBrowser( zVIEW    vSubtask )
{
   zVIEW    StackObject;
   zVIEW    lpZeidonVML;
   zVIEW    v;
   zLONG    lDataLth;
   zSHORT   nZRetCode;

   nZRetCode = GetViewByName( &lpZeidonVML, "ZeidonVML", vSubtask, zLEVEL_TASK );
   nZRetCode = GetViewByName( &StackObject, "StackObject", lpZeidonVML, zLEVEL_SUBTASK );
   lDataLth = 4;
   GetBlobFromAttribute( &v, &lDataLth,
                         StackObject, "Variable", "Value" );
   if ( v != 0 )
   {
      nZRetCode = StageBrowser( vSubtask, v );
   }
   if ( nZRetCode == -1 )
   {
      MessageSend( vSubtask, "VS00201", "Launcher",
                   "View is not yet valid",
                   zMSGQ_OBJECT_CONSTRAINT_ERROR, zBEEP );
   }
   return( 0 );
}

开发者ID:DeegC，项目名称:ZeidonTools，代码行数:26，代码来源:tzvsdbad.c

示例6: InitInterp

//
// OPERATION:   InitializeInterpretor
//
// DESCRIPTION: InitializeInterpretor does all of the set up for the VML
//    interpretor. Loads the XPG File. Next be sure that we have access to
//   the global as well as Zeidon operation lists. Also Init two Globals.
//
zOPER_EXPORT zSHORT OPERATION
InitInterp( zVIEW  lpInterpSubtask,
            zVIEW  lpAppSubtask,
            zPCHAR szSrcDLLName )
{
   zVIEW  vStackObject;
// zVIEW  vViewObject;
   zVIEW  vTZOPGRPO;
   zCHAR  szExecDir[ zMAX_FILESPEC_LTH + 1 ];                   // dir string
   zSHORT nRC;

   nRC = LoadXPG( lpInterpSubtask, lpAppSubtask, szSrcDLLName, "C" );
   if ( nRC != 0 ) //  failed
      return( -1 );

   if ( GetViewByName( &vStackObject, "StackObject", lpInterpSubtask, zLEVEL_SUBTASK ) != zLEVEL_SUBTASK )
   {
      // activate an empty stack object.
      ActivateEmptyObjectInstance( &vStackObject, "TZVSRTOO", lpInterpSubtask, zSINGLE );

      // create the root of the stack object.
      CreateEntity( vStackObject, "StackObject", zPOS_AFTER );

      // Name the Stack Object
      SetNameForView( vStackObject, "StackObject", lpInterpSubtask, zLEVEL_SUBTASK );
   }

#if 0 // DGC  The following to OIs do not appear to be used anywhere so I'm
      // removing them so that we don't need an LPLR to be active.
   // get access to the global operation list and the Zeidon operation list
   nRC = RetrieveViewForMetaList( vSubtask, &lpGOListView, zREFER_GO_META );
   if ( nRC < 0 ) //  failed
      lpGOListView = 0;

   // get a view to the Task LPLR
   if ( GetViewByName( &vViewObject, "TaskLPLR", vSubtask, zLEVEL_TASK ) != zLEVEL_TASK )
      return( -1 );
#endif

   if ( GetViewByName( &vTZOPGRPO, "TZOPSIGK.Interp", lpInterpSubtask, zLEVEL_TASK ) != zLEVEL_TASK )
   {
      // get the exec directory
      zgGetZeidonToolsDir( lpAppSubtask, szExecDir, zAPPL_DIR_OBJECT );

      // concat the name. and the .XGO extention
      strcat_s( szExecDir, zsizeof( szExecDir ), "TZOPSIGK.XGO" );

      nRC = ActivateOI_FromFile( &vTZOPGRPO, "TZOPGRPO", lpInterpSubtask, szExecDir, zSINGLE );

      if ( nRC < 0 ) //  failed
         vTZOPGRPO = 0;
      else
         SetNameForView( vTZOPGRPO, "TZOPSIGK.Interp", lpInterpSubtask, zLEVEL_TASK );
   }

   g_nStackPtr = 0;
   g_nCallStack[ 0 ] = 1;
   return( 0 );
}

开发者ID:DeegC，项目名称:10d，代码行数:66，代码来源:tzvminaa.c

示例7: zwTZCMRPTD_RefreshSelComponents

zOPER_EXPORT zSHORT OPERATION
zwTZCMRPTD_RefreshSelComponents( zVIEW vSubtask )
{
   zVIEW    vTZCMLPLO;
   zVIEW    vTZCMRPTO;
   zVIEW    vCompList;
   zVIEW    vTZCMRPTO_New;
   zCHAR    szName[ 33 ];
   zCHAR    szERR_Msg[ 254 ];

   SetNameForView( vSubtask,"TZCM_ChkInWindow", vSubtask, zLEVEL_TASK );
   GetViewByName( &vTZCMRPTO, "TZCMRPTO", vSubtask, zLEVEL_TASK );

   if ( SetCursorFirstSelectedEntity( vTZCMRPTO, "ReportLine",
                                      "" ) < zCURSOR_SET )
   {
      zstrcpy( szERR_Msg, "No Component selected to Refresh." );
      MessageSend( vSubtask, "CM00241", "Configuration Management",
                   szERR_Msg, zMSGQ_OBJECT_CONSTRAINT_WARNING, zBEEP );
      return( 0 );
   }

   if ( zwTZCMLPLD_OptionRefreshFromRepo( vSubtask, &vTZCMLPLO,
                                          szName, zRefreshUserDefined ) < 0 )
   {
      return( -1 );
   }

   GetViewByName( &vTZCMRPTO_New, "TZCMRPTO_New", vSubtask, zLEVEL_TASK );

   // if component refreshed?
   if ( CompareAttributeToInteger( vTZCMRPTO_New, "CPLR",
                                   "ComponentRefreshed", 1 ) == 0 )
   {
      zstrcpy( szERR_Msg, "Project '" );
      GetStringFromAttribute( &szERR_Msg[ zstrlen( szERR_Msg ) ], vTZCMLPLO,
                              "LPLR", "Name" );
      zstrcat( szERR_Msg, "' has been successfully refreshed \nfrom CPLR '" );
      zstrcat( szERR_Msg, szName );
      zstrcat( szERR_Msg, "'." );
      MessageSend( vSubtask, "CM00279", "Configuration Management",
                   szERR_Msg,
                   zMSGQ_OBJECT_CONSTRAINT_INFORMATION, zBEEP );
   }

   if ( GetViewByName( &vTZCMRPTO, "TZCMRPTO", vSubtask, zLEVEL_TASK ) > 0 )
      DropObjectInstance( vTZCMRPTO );

   // Build new Refresh List
   if ( zwTZCMLPLD_RefreshUserDefined( vSubtask ) < 1 )
      return( -1 );

   RefreshWindow( vSubtask );

   if ( GetViewByName( &vCompList, "CompList", vSubtask, zLEVEL_TASK ) >= 0 )
      RefreshWindow( vCompList );

   return( 0 );
} // zwTZCMRPTD_RefreshSelComponents

开发者ID:arksoftgit，项目名称:10c，代码行数:59，代码来源:tzcmrptd.c

示例8: zwTZVSDBAD_Resume

zOPER_EXPORT zSHORT OPERATION
zwTZVSDBAD_Resume( zVIEW    vSubtask )
{
   zVIEW    vAppSubtask;
   zVIEW    lpZeidonVML;
   zSHORT   nZRetCode;

   nZRetCode = GetViewByName( &lpZeidonVML, "ZeidonVML", vSubtask, zLEVEL_TASK );
   nZRetCode = GetViewByName( &vAppSubtask, "ApplicationView", lpZeidonVML, zLEVEL_SUBTASK );
   nZRetCode = Exec_ResumeFromDebugger( vSubtask, "", vAppSubtask );
   return( 0 );
}

开发者ID:DeegC，项目名称:ZeidonTools，代码行数:12，代码来源:tzvsdbad.c

示例9: GetExecModeByZKey

zOPER_EXPORT zLONG OPERATION
GetExecModeByZKey( zVIEW  lpInterpSubtask,
                   zVIEW  lpAppSubtask,
                   zLONG  lZKey )

{
   zVIEW  vXChecker;
   zVIEW  CM_List;
   zCHAR  szExecDir[ zMAX_FILESPEC_LTH + 1 ];
   zSHORT nRC;

   nRC = GetViewByName( &vXChecker, "TZVSXCOO", lpInterpSubtask, zLEVEL_APPLICATION );

   if ( nRC != zLEVEL_APPLICATION )
   {
      nRC = GetViewByName( &CM_List, "TZCMWKSO", lpInterpSubtask, zLEVEL_APPLICATION );

      nRC = GetStringFromAttribute( szExecDir, zsizeof( szExecDir ), CM_List, "LPLR", "ExecDir" );

      ZeidonStringConcat( szExecDir, 1, 0, "\\TZVSXC01.POR", 1, 0, zMAX_FILESPEC_LTH + 1 );
      nRC = ActivateOI_FromFile( &vXChecker, "TZVSXCOO", lpAppSubtask, szExecDir, zSINGLE | zIGNORE_ATTRIB_ERRORS );
      if ( nRC != 0 )
         return( -1 );
   }

   nRC = SetCursorFirstEntityByInteger( vXChecker, "DialogOperation", "ZKey", lZKey, "APPLICATION" );
#if 0
   if ( nRC != zCURSOR_SET )
      return( -1 );
#else

   if ( nRC < zCURSOR_SET )
      nRC = SetCursorFirstEntityByInteger( vXChecker, "LOD_Operation", "ZKey", lZKey, "APPLICATION" );
   if ( nRC < zCURSOR_SET )
      nRC = SetCursorFirstEntityByInteger( vXChecker, "Operation", "ZKey", lZKey, "APPLICATION" );

   // why do this???
   if ( nRC < zCURSOR_SET )
      return( -1 );
#endif

   if ( nRC >= zCURSOR_SET )
   {
      nRC = SetAttributeFromInteger( vXChecker, "APPLICATION", "CurrentMode", zXC_SETUP_DEBUGGER );
      return( zXC_SETUP_DEBUGGER );
   }
   else
   {
      nRC = SetAttributeFromInteger( vXChecker, "APPLICATION", "CurrentMode", 1 );
      return( zXC_OPERATION_STAGED );
   }
}

开发者ID:DeegC，项目名称:10d，代码行数:52，代码来源:tzvminaa.c

示例10: fnMapCtrlsFromOI

void
fnMapCtrlsFromOI( ZMapAct *pzma,
                  WPARAM  wParam,
                  LPARAM  lParam )
{
#ifdef DEBUG_ALL
   TraceLineS( "MapCtrlsFromOI: ", *(pzma->m_pzsTag) );
   if ( zstrcmp( *(pzma->m_pzsTag), "Text42" ) == 0 )
      TraceLineS( "Before MapCtrlsFromOI: ", *(pzma->m_pzsTag) );
#endif

   // Map all except the one(s) specified (if any).
   if ( pzma &&
        (lParam == 0 || fnFindCtrlInList( pzma, (zCPCHAR) lParam ) == FALSE) )
   {
#ifdef DEBUG_ALL
      if ( zstrcmp( *(pzma->m_pZSubtask->m_pzsWndTag), "Invoice" ) == 0 &&
           pzma->m_pzsAName && pzma->m_pzsEName )
      {
         zVIEW vApp;

         GetViewByName( &vApp, "mInvO",
                        pzma->m_pZSubtask->m_vDialog, zLEVEL_ANY );
      // GetViewByName( &vApp, *(pzma->m_pzsVName),
      //                pzma->m_pZSubtask->m_vDialog, zLEVEL_ANY );
         if ( vApp )
         {
            DisplayEntityInstance( vApp, "ReceiptApplied" );
         // DisplayEntityInstance( vApp, *(pzma->m_pzsEName) );
         }
      }
#endif

      pzma->MapFromOI( wParam );

#ifdef DEBUG_ALL
   // if ( zstrcmp( *(pzma->m_pzsTag), "Text42" ) == 0 ||
   //      zstrcmp( *(pzma->m_pzsTag), "Text44" ) == 0 )
      if ( zstrcmp( *(pzma->m_pZSubtask->m_pzsWndTag), "Invoice" ) == 0 &&
           pzma->m_pzsAName && pzma->m_pzsEName )
      {
         zVIEW vApp;

         TraceLineS( "After MapCtrlsFromOI: ", *(pzma->m_pzsTag) );
         GetViewByName( &vApp, "mInvO",
                        pzma->m_pZSubtask->m_vDialog, zLEVEL_ANY );
         if ( vApp )
            DisplayEntityInstance( vApp, "ReceiptApplied" );
      }
#endif
   }
}

开发者ID:DeegC，项目名称:ZeidonTools，代码行数:52，代码来源:ZDrVCtrl.cpp

示例11: zwTZCMRPTD_CloseRefresh

zOPER_EXPORT zSHORT OPERATION
zwTZCMRPTD_CloseRefresh( zVIEW vSubtask )
{
   zVIEW  vView;

   if ( GetViewByName( &vView, "TZCMRPTO", vSubtask, zLEVEL_TASK ) > 0 )
      DropObjectInstance( vView );

   if ( GetViewByName( &vView, "TZCMRPTO_New", vSubtask, zLEVEL_TASK ) > 0 )
      DropObjectInstance( vView );

   return( 0 );
} // zwTZCMRPTD_CloseRefresh

开发者ID:arksoftgit，项目名称:10c，代码行数:13，代码来源:tzcmrptd.c

示例12: zwTZVSDBAD_BuildVar

zOPER_EXPORT zSHORT OPERATION
zwTZVSDBAD_BuildVar( zVIEW    vSubtask )
{
   zVIEW    vStackObject;
   zVIEW    lpZeidonVML;
   zSHORT   nZRetCode;

   nZRetCode = GetViewByName( &lpZeidonVML, "ZeidonVML", vSubtask, zLEVEL_TASK );
   nZRetCode = GetViewByName( &vStackObject, "StackObject", lpZeidonVML, zLEVEL_SUBTASK );
   nZRetCode = SetNameForView( vStackObject, "StackObject", vSubtask, zLEVEL_SUBTASK );
   nZRetCode = CreateTemporalSubobjectVersion( vStackObject, "Variable" );
   return( 0 );
}

开发者ID:DeegC，项目名称:ZeidonTools，代码行数:13，代码来源:tzvsdbad.c

示例13: zwTZVSDBAD_PostInitDebugger

zOPER_EXPORT zSHORT OPERATION
zwTZVSDBAD_PostInitDebugger( zVIEW    vSubtask )
{
   zVIEW    XPG;
   zVIEW    vStatementView;
   zSHORT   nZRetCode;
   zSHORT   RESULT;
   zLONG    lTempInteger_0;

   nZRetCode = GetViewByName( &XPG, "XPG", vSubtask, zLEVEL_SUBTASK );
   nZRetCode = GetViewByName( &vStatementView, "StatementView", vSubtask, zLEVEL_SUBTASK );
   nZRetCode = GetIntegerFromAttribute( &lTempInteger_0, vStatementView, "Statement", "RelativeLineNumber" );
   RESULT = SetCursorFirstEntityByInteger( XPG, "OperationText", "RelativeLineNumber", lTempInteger_0, "" );
   return( 0 );
}

开发者ID:DeegC，项目名称:ZeidonTools，代码行数:15，代码来源:tzvsdbad.c

示例14: zwTZCMRPTD_DropViewForAudittrail

/////////////////////////////////////////////////////////////////////////////
//
//    OPERATION: zwTZCMRPTD_DropViewForAudittrail
//
//
/////////////////////////////////////////////////////////////////////////////
zOPER_EXPORT zSHORT /*DIALOG */  OPERATION
zwTZCMRPTD_DropViewForAudittrail( zVIEW vSubtask )
{
   zVIEW vTZBRAUDO;

   if ( GetViewByName( &vTZBRAUDO, "TZBRAUDO", vSubtask, zLEVEL_TASK ) > 0 )
      DropObjectInstance( vTZBRAUDO );

   if ( GetViewByName( &vTZBRAUDO, "TZBRAU2O", vSubtask, zLEVEL_TASK ) > 0 )
      DropObjectInstance( vTZBRAUDO );

   if ( GetViewByName( &vTZBRAUDO, "TZBRAU3O", vSubtask, zLEVEL_TASK ) > 0 )
      DropObjectInstance( vTZBRAUDO );

   return( 0 );
} // zwTZCMRPTD_DropViewForAudittrail

开发者ID:arksoftgit，项目名称:10c，代码行数:22，代码来源:tzcmrptd.c

示例15: SironCreateDataModel

/////////////////////////////////////////////////////////////////////////////
//
//    OPERATION: SironCreateDataModel
//
//
/////////////////////////////////////////////////////////////////////////////
zOPER_EXPORT zSHORT /*GLOBAL */  OPERATION
SironCreateDataModel( zVIEW vSubtask,
                      zPVIEW pvERD )
{
   zVIEW  vERD_Window;
   zVIEW  vTaskLPLR;

   GetViewByName( &vTaskLPLR, "TaskLPLR", vSubtask, zLEVEL_TASK );

   ActivateEmptyMetaOI( vSubtask, pvERD, zSOURCE_ERD_META,
                        zSINGLE | zLEVEL_APPLICATION );

   // Build Root Instance
   CreateMetaEntity( vSubtask, *pvERD, "EntpER_Model", zPOS_AFTER );
   SetAttributeFromAttribute( *pvERD, "EntpER_Model", "Name", vTaskLPLR, "LPLR", "Name" );
   SetAttributeFromString( *pvERD, "EntpER_Model", "Desc", "Siron Catalogs DataModel" );
   SetNameForView( *pvERD, "TZEREMDO", vSubtask, zLEVEL_TASK );

   // Data Model exists, enable ERD Control
   GetParentWindow( &vERD_Window, vSubtask );
   SetCtrlState( vERD_Window, "ERD", zCONTROL_STATUS_ENABLED, TRUE );

   // Set window Title with check out state
   SetTitleWithCheckOutState( vERD_Window, "Data Model", "TZEREMDO", *pvERD,
                              "EntpER_Model", zSOURCE_ERD_META );
   return( 0 );
} // SironCreateDataModel

开发者ID:arksoftgit，项目名称:10c，代码行数:33，代码来源:tzsioprs.c

示例16: oTZCMQSYO_ActivateREPO_Enqueue

//./ ADD NAME=oTZCMQSYO_ActivateREPO_Enqueue
// Source Module=tzcmrepo.c
////////////////////////////////////////////////
//
//  OPERATION:  oTZCMQSYO_ActivateREPO_Enqueue
//
//  PURPOSE:    Checks for REPOS_Enqueue via the SystemAdmin.
//
//  PARAMETERS: vTZCMREPO - A pointer to the return Repository Enqueue view
//              vSubtask  - A qualifying view for the Activation
//
//  RETURNS:   >= 0  - TZCMREPO activated successfully
//               -1  - Error encountered during activation
//
////////////////////////////////////////////////
//./ END + 2
zOPER_EXPORT zSHORT OPERATION
oTZCMQSYO_ActivateREPO_Enqueue( zPVIEW vTZCMQSYO,
                                zVIEW  vSubtask )
{
   zVIEW  vKZDBHQUA;
   zSHORT nRC;

   if ( GetViewByName( &vKZDBHQUA, "KZDBHQUA", vSubtask, zLEVEL_TASK ) < 0 )
   {
      if ( ActivateEmptyObjectInstance( &vKZDBHQUA, "KZDBHQUA",
                                        vSubtask, zSINGLE ) >= 0 )
      {
         SetNameForView( vKZDBHQUA, "KZDBHQUA", vSubtask, zLEVEL_TASK );
         CreateEntity( vKZDBHQUA, "EntitySpec", zPOS_AFTER );
         CreateEntity( vKZDBHQUA, "QualAttrib", zPOS_AFTER );
      }
      else
         return( -1 );
   }

   SetAttributeFromString( vKZDBHQUA, "EntitySpec", "EntityName",
                           "SysEnqueue" );
   SetAttributeFromString( vKZDBHQUA, "QualAttrib", "EntityName",
                           "SysEnqueue" );
   SetAttributeFromString( vKZDBHQUA, "QualAttrib", "AttributeName",
                           "TimeStamp" );
   SetAttributeFromString( vKZDBHQUA, "QualAttrib", "Oper", ">" );
   SetAttributeFromString( vKZDBHQUA, "QualAttrib", "Value",
                           "19000101000000000" );
   nRC = ActivateObjectInstance( vTZCMQSYO, "TZCMQSYO", vSubtask,
                                 vKZDBHQUA, zLEVEL_TASK | zMULTIPLE );
   DropObjectInstance( vKZDBHQUA );
   return( nRC );
}

开发者ID:DeegC，项目名称:10d，代码行数:50，代码来源:tzcmqsyo.c

示例17: ObjList_AddObjOpersToWorkList

/*

   The user selected a LOD in the Object list.  Load the LOD meta and copy
   all object operations to the editor work object.

*/
zOPER_EXPORT zSHORT OPERATION
ObjList_AddObjOpersToWorkList( zVIEW vSubtask )
{
   zVIEW  vObjList;
   zVIEW  vLOD;
   zVIEW  vEdWrk;
   zSHORT nRC;
   zSHORT nLth;
   zCHAR  szOpName[ 255 ];

   GetWorkView( &vEdWrk );

   GetViewByName( &vObjList, "TZEDCWZD_TZCMLPLO_List", vSubtask, zLEVEL_TASK );
   ActivateMetaOI( vSubtask, &vLOD, vObjList, zREFER_LOD_META, 0 );
   GetStringFromAttribute( szOpName, vObjList, "W_MetaDef", "Name" );
   zstrcat( szOpName, "." );
   nLth = zstrlen( szOpName );

   for ( nRC = SetCursorFirstEntity( vLOD, "OperationList", 0 );
         nRC == zCURSOR_SET;
         nRC = SetCursorNextEntity( vLOD, "OperationList", 0 ) )
   {
      GetStringFromAttribute( &szOpName[ nLth ],
                              vLOD, "OperationList", "Name" );

      CreateEntity( vEdWrk, "Oper", zPOS_LAST );
      SetAttributeFromString( vEdWrk, "Oper", "Name", szOpName );
   }

   DropMetaOI( vSubtask, vLOD );
   DropView( vObjList );

   return( 0 );

} // ObjList_AddObjOpersToWorkList

开发者ID:DeegC，项目名称:ZeidonTools，代码行数:41，代码来源:tzedcwzd.c

示例18: CopyEntityGroupMappingStart

//:   VIEW TZZOLODO REGISTERED AS TZZOLODO
zOPER_EXPORT zSHORT OPERATION
CopyEntityGroupMappingStart( zVIEW     vSubtask )
{
   zVIEW     TZZOLODO = 0; 
   zSHORT    RESULT; 
   //:STRING ( 100 ) MappingName
   zCHAR     MappingName[ 101 ] = { 0 }; 
   zSHORT    lTempInteger_0; 
   zCHAR     szTempString_0[ 33 ]; 

   RESULT = GetViewByName( &TZZOLODO, "TZZOLODO", vSubtask, zLEVEL_TASK );

   //:// Copy the mapping name of the attribute to the clip board.
   //:IF TZZOLODO.LOD_Entity EXISTS
   lTempInteger_0 = CheckExistenceOfEntity( TZZOLODO, "LOD_Entity" );
   if ( lTempInteger_0 == 0 )
   { 
      //:MappingName = "[Z:#S:" +
      //:              TZZOLODO.LOD_Entity.Name + "]"
      GetVariableFromAttribute( szTempString_0, 0, 'S', 33, TZZOLODO, "LOD_Entity", "Name", "", 0 );
      ZeidonStringCopy( MappingName, 1, 0, "[Z:#S:", 1, 0, 101 );
      ZeidonStringConcat( MappingName, 1, 0, szTempString_0, 1, 0, 101 );
      ZeidonStringConcat( MappingName, 1, 0, "]", 1, 0, 101 );
      //:SetClipboardBlob( MappingName, 0, 0 )
      SetClipboardBlob( MappingName, 0, 0 );
   } 

   //:END
   return( 0 );
// END
}

开发者ID:DeegC，项目名称:ZeidonTools，代码行数:32，代码来源:tzzoloq2.c

示例19: PostBSetVKey

/////////////////////////////////////////////////////////////////////////////
//
// ENTRY:
//
// PURPOSE:    Set the VKey Ctrl/Alt/Shift check boxes
//
/////////////////////////////////////////////////////////////////////////////
zOPER_EXPORT zSHORT OPERATION
PostBSetVKey( zVIEW vSubtask )
{
   zULONG ulLth = sizeof( zACCEL_DEF );
   zVIEW  vHotkey;
   zACCEL_DEF ac;

   GetViewByName( &vHotkey, "KZHKEYSO", vSubtask, zLEVEL_ANY );
   if ( vHotkey &&
        CheckExistenceOfEntity( vHotkey, "Hotkey" ) > zCURSOR_UNCHANGED )
   {
      GetBlobFromAttribute( &ac, &ulLth, vHotkey, "Hotkey", "KeyCombo" );
      SetCtrlState( vSubtask, "Ctrl", zCONTROL_STATUS_CHECKED, ac.fCtrl );
      SetCtrlState( vSubtask, "Alt", zCONTROL_STATUS_CHECKED, ac.fAlt );
      SetCtrlState( vSubtask, "Shift", zCONTROL_STATUS_CHECKED, ac.fShift );
//    if ( CheckExistenceOfEntity( vHotkey, "Operation" ) > zCURSOR_UNCHANGED )
//    {
//       zPCHAR pch;
//
//       GetAddrForAttribute( &pch, vHotkey, "Operation", "DLL_Name" );
//       SetCtrlText( vSubtask, "DLL_Name", pch );
//    }
   }

   return( 0 );
}

开发者ID:DeegC，项目名称:ZeidonTools，代码行数:33，代码来源:tzhkeyad.c

示例20: zwTZHKEYAD_ExitAppl

/////////////////////////////////////////////////////////////////////////////
//
// ENTRY:
//
// PURPOSE:
//
/////////////////////////////////////////////////////////////////////////////
zOPER_EXPORT zSHORT OPERATION
zwTZHKEYAD_ExitAppl( zVIEW vSubtask )
{
   zVIEW  vKZHKEYSO;
   zSHORT nRC;

   // Get Access to current HK Object and prompt for Save.
   nRC = GetViewByName( &vKZHKEYSO, "KZHKEYSO", vSubtask, zLEVEL_ANY );
   if ( nRC > 0 && ObjectInstanceUpdatedFromFile( vKZHKEYSO ) == 1 )
   {
      zCHAR  szMsg[ 300 ];

      zstrcpy( szMsg, "Do you wish to save current Application Hotkeys?" );
      nRC = MessagePrompt( vSubtask, "HK00104",
                           "Hot Keys",
                            szMsg,
                            zBEEP, zBUTTONS_YESNOCANCEL,
                            zRESPONSE_NO,  0 );
      if ( nRC == zRESPONSE_CANCEL )
      {
         SetWindowActionBehavior( vSubtask, zWAB_ReturnToTopWindow,
                                  "TZHKEYAD", "Application" );
         return( 0 );
      }
      else
      {
         if ( nRC == zRESPONSE_YES )
            zwTZHKEYAD_SaveHK_ForLPLR( vSubtask );
      }
   }

//xTerminateLPLR( vSubtask );
   return( 0 );
}

开发者ID:DeegC，项目名称:ZeidonTools，代码行数:41，代码来源:tzhkeyad.c

注：本文中的GetViewByName函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ GetVirtualMapForMapAndZone函数代码示例发布时间：2022-05-30

C++ GetView函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18271|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9677|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8179|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8549|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8457|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9392|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8430|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7865|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8415|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ GetViewByName函数代码示例

示例1: zwTZCMRPTD_RefreshAllComponents

示例2: zwTZERRORD_WriteErrorMsg

示例3: zwTZVSDBAD_StepOnce

示例4: zwTZVSDBAD_Update

示例5: zwTZVSDBAD_SpawnObjectBrowser

示例6: InitInterp

示例7: zwTZCMRPTD_RefreshSelComponents

示例8: zwTZVSDBAD_Resume

示例9: GetExecModeByZKey

示例10: fnMapCtrlsFromOI

示例11: zwTZCMRPTD_CloseRefresh

示例12: zwTZVSDBAD_BuildVar

示例13: zwTZVSDBAD_PostInitDebugger

示例14: zwTZCMRPTD_DropViewForAudittrail

示例15: SironCreateDataModel

示例16: oTZCMQSYO_ActivateREPO_Enqueue

示例17: ObjList_AddObjOpersToWorkList

示例18: CopyEntityGroupMappingStart

示例19: PostBSetVKey

示例20: zwTZHKEYAD_ExitAppl

请发表评论

全部评论

上一篇：

下一篇：

binder-examples/latex: Using `apt.txt` t

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053