C++ HAL_INTERRUPT_MASK函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中HAL_INTERRUPT_MASK函数的典型用法代码示例。如果您正苦于以下问题：C++ HAL_INTERRUPT_MASK函数的具体用法？C++ HAL_INTERRUPT_MASK怎么用？C++ HAL_INTERRUPT_MASK使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了HAL_INTERRUPT_MASK函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: cyg_hal_plf_serial_control

static int
cyg_hal_plf_serial_control(void *__ch_data, __comm_control_cmd_t __func, ...)
{
    static int irq_state = 0;
    channel_data_t* chan = (channel_data_t*)__ch_data;
    
    int ret = 0;
    CYGARC_HAL_SAVE_GP();

    switch (__func) {
    case __COMMCTL_GETBAUD:
        ret = chan->baud_rate;
        break;
    case __COMMCTL_SETBAUD:
	{
	va_list ap;
	va_start(ap, __func);
	
	ret = chan->baud_rate;
	chan->baud_rate = va_arg(ap, cyg_int32);
	init_serial_channel(chan);
	
	va_end(ap);
	}
	break;
    case __COMMCTL_IRQ_ENABLE:
        HAL_INTERRUPT_SET_LEVEL(chan->imb3_vector, chan->level);
	HAL_INTERRUPT_UNMASK(chan->imb3_vector);
        HAL_INTERRUPT_UNMASK(chan->siu_vector);
        irq_state = 1;
        break;
    case __COMMCTL_IRQ_DISABLE:
        ret = irq_state;
        irq_state = 0;
        HAL_INTERRUPT_MASK(chan->imb3_vector);
	HAL_INTERRUPT_MASK(chan->siu_vector);
        break;
    case __COMMCTL_DBG_ISR_VECTOR:
        ret = chan->siu_vector;
        break;
    case __COMMCTL_SET_TIMEOUT:
        {
        va_list ap;
        va_start(ap, __func);

        ret = chan->msec_timeout;
        chan->msec_timeout = va_arg(ap, cyg_uint32);

        va_end(ap);
        }        
	break;
    default:
        break;
    }
    CYGARC_HAL_RESTORE_GP();
    return ret;
}

开发者ID:KarenHung，项目名称:ecosgit，代码行数:57，代码来源:hal_diag.c

示例2: cyg_hal_plf_serial_init

static void
cyg_hal_plf_serial_init(void)
{
    hal_virtual_comm_table_t* comm;
    int cur = CYGACC_CALL_IF_SET_CONSOLE_COMM(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);

    // Disable interrupts.
    HAL_INTERRUPT_MASK(channels[0].isr_vector);
#if (CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS > 1)
    HAL_INTERRUPT_MASK(channels[1].isr_vector);
#endif

    // Init channels
    init_serial_channel(&channels[0]);
#if (CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS > 1)
    init_serial_channel(&channels[1]);
#endif

    // Setup procs in the vector table

    // Set channel 0
    CYGACC_CALL_IF_SET_CONSOLE_COMM(0);
    comm = CYGACC_CALL_IF_CONSOLE_PROCS();
    CYGACC_COMM_IF_CH_DATA_SET(*comm, &channels[0]);
    CYGACC_COMM_IF_WRITE_SET(*comm, cyg_hal_plf_serial_write);
    CYGACC_COMM_IF_READ_SET(*comm, cyg_hal_plf_serial_read);
    CYGACC_COMM_IF_PUTC_SET(*comm, cyg_hal_plf_serial_putc);
    CYGACC_COMM_IF_GETC_SET(*comm, cyg_hal_plf_serial_getc);
    CYGACC_COMM_IF_CONTROL_SET(*comm, cyg_hal_plf_serial_control);
    CYGACC_COMM_IF_DBG_ISR_SET(*comm, cyg_hal_plf_serial_isr);
    CYGACC_COMM_IF_GETC_TIMEOUT_SET(*comm, cyg_hal_plf_serial_getc_timeout);

#if (CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS > 1)
    // Set channel 1
    CYGACC_CALL_IF_SET_CONSOLE_COMM(1);
    comm = CYGACC_CALL_IF_CONSOLE_PROCS();
    CYGACC_COMM_IF_CH_DATA_SET(*comm, &channels[1]);
    CYGACC_COMM_IF_WRITE_SET(*comm, cyg_hal_plf_serial_write);
    CYGACC_COMM_IF_READ_SET(*comm, cyg_hal_plf_serial_read);
    CYGACC_COMM_IF_PUTC_SET(*comm, cyg_hal_plf_serial_putc);
    CYGACC_COMM_IF_GETC_SET(*comm, cyg_hal_plf_serial_getc);
    CYGACC_COMM_IF_CONTROL_SET(*comm, cyg_hal_plf_serial_control);
    CYGACC_COMM_IF_DBG_ISR_SET(*comm, cyg_hal_plf_serial_isr);
    CYGACC_COMM_IF_GETC_TIMEOUT_SET(*comm, cyg_hal_plf_serial_getc_timeout);
#endif
    
    // Restore original console
    CYGACC_CALL_IF_SET_CONSOLE_COMM(cur);
}

开发者ID:lijinlei，项目名称:Kernel_BOOX60，代码行数:49，代码来源:hal_diag.c

示例3: init_ser

void
init_ser(void)
{
    cyg_uint8* base = (cyg_uint8*)E7T_UART1_BASE;

    // 8-1-no parity.
    HAL_WRITE_UINT32(base+E7T_UART_LCON,
                     E7T_UART_LCON_8_DBITS|E7T_UART_LCON_1_SBITS|E7T_UART_LCON_NO_PARITY);

    // Mask interrupts.
    HAL_INTERRUPT_MASK(CYGNUM_HAL_INTERRUPT_UART0_RX);
    HAL_INTERRUPT_MASK(CYGNUM_HAL_INTERRUPT_UART0_TX);

    HAL_WRITE_UINT32(base+E7T_UART_BRDIV, SIO_BRDDIV);
}

开发者ID:lijinlei，项目名称:Kernel_BOOX60，代码行数:15，代码来源:hal_diag.c

示例4: cyg_hal_plf_serial_init

static void
cyg_hal_plf_serial_init(void)
{
    hal_virtual_comm_table_t* comm;
    int cur = CYGACC_CALL_IF_SET_CONSOLE_COMM(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
	// CYGACC_CALL_VV1(__call_if_set_console_comm_t*, CYGNUM_CALL_IF_SET_CONSOLE_COMM, -1)
	//__call_VV1(CYGNUM_CALL_IF_SET_CONSOLE_COMM, __call_if_set_console_comm_t, int, int)

    // Disable interrupts.
    HAL_INTERRUPT_MASK(smdk_ser_channels[0].isr_vector);
    HAL_INTERRUPT_MASK(smdk_ser_channels[1].isr_vector);

    //Unmask UART0/1 RX interrupt
    HAL_WRITE_UINT32(INTSUBMSK, __READ_UINT32(INTSUBMSK) & ~(BIT_SUB_RXD0|BIT_SUB_RXD1));

    // Init channels
    cyg_hal_plf_serial_init_channel(&smdk_ser_channels[0]);
    cyg_hal_plf_serial_init_channel(&smdk_ser_channels[1]);

    // Setup procs in the vector table

    // Set channel 0
    CYGACC_CALL_IF_SET_CONSOLE_COMM(0);
    comm = CYGACC_CALL_IF_CONSOLE_PROCS();
    CYGACC_COMM_IF_CH_DATA_SET(*comm, &smdk_ser_channels[0]);
    CYGACC_COMM_IF_WRITE_SET(*comm, cyg_hal_plf_serial_write);
    CYGACC_COMM_IF_READ_SET(*comm, cyg_hal_plf_serial_read);
    CYGACC_COMM_IF_PUTC_SET(*comm, cyg_hal_plf_serial_putc);
    CYGACC_COMM_IF_GETC_SET(*comm, cyg_hal_plf_serial_getc);
    CYGACC_COMM_IF_CONTROL_SET(*comm, cyg_hal_plf_serial_control);
    CYGACC_COMM_IF_DBG_ISR_SET(*comm, cyg_hal_plf_serial_isr);
    CYGACC_COMM_IF_GETC_TIMEOUT_SET(*comm, cyg_hal_plf_serial_getc_timeout);

    // Set channel 1
    CYGACC_CALL_IF_SET_CONSOLE_COMM(1);
    comm = CYGACC_CALL_IF_CONSOLE_PROCS();
    CYGACC_COMM_IF_CH_DATA_SET(*comm, &smdk_ser_channels[1]);
    CYGACC_COMM_IF_WRITE_SET(*comm, cyg_hal_plf_serial_write);
    CYGACC_COMM_IF_READ_SET(*comm, cyg_hal_plf_serial_read);
    CYGACC_COMM_IF_PUTC_SET(*comm, cyg_hal_plf_serial_putc);
    CYGACC_COMM_IF_GETC_SET(*comm, cyg_hal_plf_serial_getc);
    CYGACC_COMM_IF_CONTROL_SET(*comm, cyg_hal_plf_serial_control);
    CYGACC_COMM_IF_DBG_ISR_SET(*comm, cyg_hal_plf_serial_isr);
    CYGACC_COMM_IF_GETC_TIMEOUT_SET(*comm, cyg_hal_plf_serial_getc_timeout);

    // Restore original console
    CYGACC_CALL_IF_SET_CONSOLE_COMM(cur);
}

开发者ID:jamsan-n，项目名称:ecos-hmi2416，代码行数:48，代码来源:hal_diag.c

示例5: hal_mpc5xx_remove_arbitration_isr

externC hal_mpc5xx_arbitration_data *
hal_mpc5xx_remove_arbitration_isr(cyg_uint32 apriority)
{
  hal_mpc5xx_arbitration_data * result = 0;
  
  // Find the SIU vector from the priority
  CYG_ADDRWORD vector = 2*(1 + apriority);
  if(vector < CYGNUM_HAL_INTERRUPT_SIU_LVL7)
  {
    result = (hal_mpc5xx_arbitration_data *)(hal_interrupt_objects[vector]);
	HAL_INTERRUPT_DETACH(vector, hal_interrupt_handlers[vector]);
  }
  else
  {
#ifdef CYGSEM_HAL_POWERPC_MPC5XX_IMB3_ARBITER  
    // Prevent anything from coming through while manipulating the list
    HAL_INTERRUPT_MASK(CYGNUM_HAL_INTERRUPT_SIU_LVL7);
	result = mpc5xx_remove(imb3_data_head, apriority);
	
	// If something was removed, update the list.
	if(result) imb3_data_head = result->reserved;
    HAL_INTERRUPT_UNMASK(CYGNUM_HAL_INTERRUPT_SIU_LVL7);
#else
    result = (hal_mpc5xx_arbitration_data *)(hal_interrupt_objects[CYGNUM_HAL_INTERRUPT_SIU_LVL7]);
	HAL_INTERRUPT_DETACH(CYGNUM_HAL_INTERRUPT_SIU_LVL7, hal_interrupt_handlers[CYGNUM_HAL_INTERRUPT_SIU_LVL7]); 
#endif
  }

  return result;
}

开发者ID:lijinlei，项目名称:Kernel_BOOX60，代码行数:30，代码来源:var_intr.c

示例6: cyg_hal_plf_serial_init

static void
cyg_hal_plf_serial_init(void)
{
    hal_virtual_comm_table_t* comm;
    int i, cur = CYGACC_CALL_IF_SET_CONSOLE_COMM(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);

#define NUM_CHANNELS CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS
    for (i = 0; i < NUM_CHANNELS; i++) {

	// Disable interrupts.
	HAL_INTERRUPT_MASK(channels[i].isr_vector);

	// Init channels
	cyg_hal_plf_serial_init_channel((void*)&channels[i]);
	// Setup procs in the vector table

	// Set COMM callbacks for channel
	CYGACC_CALL_IF_SET_CONSOLE_COMM(i);
	comm = CYGACC_CALL_IF_CONSOLE_PROCS();
	CYGACC_COMM_IF_CH_DATA_SET(*comm, &channels[i]);
	CYGACC_COMM_IF_WRITE_SET(*comm, cyg_hal_plf_serial_write);
	CYGACC_COMM_IF_READ_SET(*comm, cyg_hal_plf_serial_read);
	CYGACC_COMM_IF_PUTC_SET(*comm, cyg_hal_plf_serial_putc);
	CYGACC_COMM_IF_GETC_SET(*comm, cyg_hal_plf_serial_getc);
	CYGACC_COMM_IF_CONTROL_SET(*comm, cyg_hal_plf_serial_control);
	CYGACC_COMM_IF_DBG_ISR_SET(*comm, cyg_hal_plf_serial_isr);
	CYGACC_COMM_IF_GETC_TIMEOUT_SET(*comm, cyg_hal_plf_serial_getc_timeout);
    }
    // Restore original console
    CYGACC_CALL_IF_SET_CONSOLE_COMM(cur);
}

开发者ID:KarenHung，项目名称:ecosgit，代码行数:31，代码来源:ser.c

示例7: cyg_hal_am33_serial_init

void
cyg_hal_am33_serial_init(int first_chan)
{
    hal_virtual_comm_table_t* comm;
    int cur = CYGACC_CALL_IF_SET_CONSOLE_COMM(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
    int i;

    for (i = 0; i < AM33_NUM_UARTS; i++) {

	// Disable interrupts.
	HAL_INTERRUPT_MASK(channels[0].isr_vector);

	// Init channel
	cyg_hal_plf_serial_init_channel((void*)&channels[i]);
	cyg_hal_plf_serial_set_baud(channels[i].base, CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD);

	// Setup procs in the vector table
	CYGACC_CALL_IF_SET_CONSOLE_COMM(i + first_chan);
	comm = CYGACC_CALL_IF_CONSOLE_PROCS();
	CYGACC_COMM_IF_CH_DATA_SET(*comm, &channels[i]);
	CYGACC_COMM_IF_WRITE_SET(*comm, cyg_hal_plf_serial_write);
	CYGACC_COMM_IF_READ_SET(*comm, cyg_hal_plf_serial_read);
	CYGACC_COMM_IF_PUTC_SET(*comm, cyg_hal_plf_serial_putc);
	CYGACC_COMM_IF_GETC_SET(*comm, cyg_hal_plf_serial_getc);
	CYGACC_COMM_IF_CONTROL_SET(*comm, cyg_hal_plf_serial_control);
	CYGACC_COMM_IF_DBG_ISR_SET(*comm, cyg_hal_plf_serial_isr);
	CYGACC_COMM_IF_GETC_TIMEOUT_SET(*comm, cyg_hal_plf_serial_getc_timeout);
    }

    // Restore original console
    CYGACC_CALL_IF_SET_CONSOLE_COMM(cur);
}

开发者ID:lijinlei，项目名称:Kernel_BOOX60，代码行数:32，代码来源:am33_serial.c

示例8: cyg_hal_plf_duart_init

static void cyg_hal_plf_duart_init(void)
{
    hal_virtual_comm_table_t* comm;
    int cur = CYGACC_CALL_IF_SET_CONSOLE_COMM(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
    int i;

    // Init channels
#define NUMOF(x) (sizeof(x)/sizeof(x[0]))
    for (i = 0;  i < NUMOF(channels);  i++) {
        HAL_INTERRUPT_MASK(channels[i].isr_vector);
        init_duart_channel(&channels[i]);
        CYGACC_CALL_IF_SET_CONSOLE_COMM(i);
        comm = CYGACC_CALL_IF_CONSOLE_PROCS();
        CYGACC_COMM_IF_CH_DATA_SET(*comm, &channels[i]);
        CYGACC_COMM_IF_WRITE_SET(*comm, cyg_hal_plf_duart_write);
        CYGACC_COMM_IF_READ_SET(*comm, cyg_hal_plf_duart_read);
        CYGACC_COMM_IF_PUTC_SET(*comm, cyg_hal_plf_duart_putc);
        CYGACC_COMM_IF_GETC_SET(*comm, cyg_hal_plf_duart_getc);
        CYGACC_COMM_IF_CONTROL_SET(*comm, cyg_hal_plf_duart_control);
        CYGACC_COMM_IF_DBG_ISR_SET(*comm, cyg_hal_plf_duart_isr);
        CYGACC_COMM_IF_GETC_TIMEOUT_SET(*comm, cyg_hal_plf_duart_getc_timeout);
    }

    // Restore original console
    CYGACC_CALL_IF_SET_CONSOLE_COMM(cur);
}

开发者ID:lijinlei，项目名称:Kernel_BOOX60，代码行数:26，代码来源:board_diag.c

示例9: cyg_hal_plf_serial_init

static void cyg_hal_plf_serial_init(void)
{
  hal_virtual_comm_table_t* comm;
  int                       cur = CYGACC_CALL_IF_SET_CONSOLE_COMM(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
  int                       iChannels = sizeof(s_atSerialChannels) / sizeof(s_atSerialChannels[0]);
  int                       iIdx;

  for(iIdx = 0; iIdx < iChannels; iIdx++)
  {
    // Disable interrupts.
    HAL_INTERRUPT_MASK(s_atSerialChannels[iIdx].isr_vector);

    // Init channels
    cyg_hal_plf_serial_init_channel(&s_atSerialChannels[iIdx]);

    // Setup procs in the vector table
    CYGACC_CALL_IF_SET_CONSOLE_COMM(iIdx);
    comm = CYGACC_CALL_IF_CONSOLE_PROCS();
    CYGACC_COMM_IF_CH_DATA_SET(*comm, &s_atSerialChannels[iIdx]);
    CYGACC_COMM_IF_WRITE_SET(*comm, cyg_hal_plf_serial_write);
    CYGACC_COMM_IF_READ_SET(*comm, cyg_hal_plf_serial_read);
    CYGACC_COMM_IF_PUTC_SET(*comm, cyg_hal_plf_serial_putc);
    CYGACC_COMM_IF_GETC_SET(*comm, cyg_hal_plf_serial_getc);
    CYGACC_COMM_IF_CONTROL_SET(*comm, cyg_hal_plf_serial_control);
    CYGACC_COMM_IF_DBG_ISR_SET(*comm, cyg_hal_plf_serial_isr);
    CYGACC_COMM_IF_GETC_TIMEOUT_SET(*comm, cyg_hal_plf_serial_getc_timeout);
  }

  // Restore original console
  CYGACC_CALL_IF_SET_CONSOLE_COMM(cur);
}

开发者ID:eartes，项目名称:netx_ecos_port，代码行数:31，代码来源:hal_diag.c

示例10: cyg_hal_plf_screen_init

void cyg_hal_plf_screen_init(void)
{
    hal_virtual_comm_table_t* comm;
    int cur = CYGACC_CALL_IF_SET_CONSOLE_COMM(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);

    // Disable interrupts.
    HAL_INTERRUPT_MASK(pc_ser_channels[PCMB_PORT_INDEX].isr_vector);

    // Init channels
    cyg_hal_plf_screen_init_channel(&pc_ser_channels[PCMB_PORT_INDEX]);

    // Setup procs in the vector table

    // Set channel 2
    CYGACC_CALL_IF_SET_CONSOLE_COMM(PCMB_PORT_INDEX);
    comm = CYGACC_CALL_IF_CONSOLE_PROCS();
    CYGACC_COMM_IF_CH_DATA_SET(*comm, &pc_ser_channels[PCMB_PORT_INDEX]);
    CYGACC_COMM_IF_WRITE_SET(*comm, cyg_hal_plf_screen_write);
    CYGACC_COMM_IF_READ_SET(*comm, cyg_hal_plf_screen_read);
    CYGACC_COMM_IF_PUTC_SET(*comm, cyg_hal_plf_screen_putc);
    CYGACC_COMM_IF_GETC_SET(*comm, cyg_hal_plf_screen_getc);
    CYGACC_COMM_IF_CONTROL_SET(*comm, cyg_hal_plf_screen_control);
    CYGACC_COMM_IF_DBG_ISR_SET(*comm, cyg_hal_plf_screen_isr);
    CYGACC_COMM_IF_GETC_TIMEOUT_SET(*comm, cyg_hal_plf_screen_getc_timeout);

    // Restore original console
    CYGACC_CALL_IF_SET_CONSOLE_COMM(cur);
}

开发者ID:EPiCS，项目名称:reconos_v2，代码行数:28，代码来源:pcmb_screen.c

示例11: cyg_hal_plf_serial_control

static int
cyg_hal_plf_serial_control(void *__ch_data, __comm_control_cmd_t __func, ...)
{
    int ret = 0;
    struct port_info *info = (struct port_info *)__ch_data;

    switch (__func) {
    case __COMMCTL_IRQ_ENABLE:
        HAL_INTERRUPT_UNMASK(info->intnum);
        info->irq_state = 1;
        break;
    case __COMMCTL_IRQ_DISABLE:
        ret = info->irq_state;
        info->irq_state = 0;
        HAL_INTERRUPT_MASK(info->intnum);
        break;
    case __COMMCTL_DBG_ISR_VECTOR:
        ret = info->intnum;
        break;
    case __COMMCTL_SET_TIMEOUT:
    {
        va_list ap;
        va_start(ap, __func);

        ret = msec_timeout;
        msec_timeout = va_arg(ap, cyg_uint32);

        va_end(ap);
    }        
    default:
        break;
    }
    return ret;
}

开发者ID:KarenHung，项目名称:ecosgit，代码行数:34，代码来源:quicc2_diag.c

示例12: cyg_hal_ixp425_serial_init

void
cyg_hal_ixp425_serial_init(void)
{
    hal_virtual_comm_table_t* comm;
    int i, cur = CYGACC_CALL_IF_SET_CONSOLE_COMM(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);

    for (i = 0; i < IXP425_NUM_UARTS; i++) {

	// Disable interrupts.
	HAL_INTERRUPT_MASK(plf_ser_channels[i].isr_vector);

	// Init channels
	cyg_hal_plf_serial_init_channel(&plf_ser_channels[i]);

	// Setup procs in the vector table
	CYGACC_CALL_IF_SET_CONSOLE_COMM(i);
	comm = CYGACC_CALL_IF_CONSOLE_PROCS();
	CYGACC_COMM_IF_CH_DATA_SET(*comm, &plf_ser_channels[i]);
	CYGACC_COMM_IF_WRITE_SET(*comm, cyg_hal_plf_serial_write);
	CYGACC_COMM_IF_READ_SET(*comm, cyg_hal_plf_serial_read);
	CYGACC_COMM_IF_PUTC_SET(*comm, cyg_hal_plf_serial_putc);
	CYGACC_COMM_IF_GETC_SET(*comm, cyg_hal_plf_serial_getc);
	CYGACC_COMM_IF_CONTROL_SET(*comm, cyg_hal_plf_serial_control);
	CYGACC_COMM_IF_DBG_ISR_SET(*comm, cyg_hal_plf_serial_isr);
	CYGACC_COMM_IF_GETC_TIMEOUT_SET(*comm, cyg_hal_plf_serial_getc_timeout);
    }
    // Restore original console
    CYGACC_CALL_IF_SET_CONSOLE_COMM(cur);
}

开发者ID:0xCA5A，项目名称:dd-wrt，代码行数:29，代码来源:ixp425_diag.c

示例13: cyg_hal_plf_serial_init_channel

static void
cyg_hal_plf_serial_init_channel(void* __ch_data)
{
    cyg_uint8* base = ((channel_data_t*)__ch_data)->base;

    // 8-1-no parity.
    HAL_WRITE_UINT32(base+E7T_UART_LCON, 
                     E7T_UART_LCON_8_DBITS|E7T_UART_LCON_1_SBITS|E7T_UART_LCON_NO_PARITY);

    HAL_WRITE_UINT32(base+E7T_UART_BRDIV, SIO_BRDDIV);

    // Mask interrupts
    HAL_INTERRUPT_MASK(((channel_data_t*)__ch_data)->isr_vector_rx);
    HAL_INTERRUPT_MASK(((channel_data_t*)__ch_data)->isr_vector_tx);

    // Enable RX and TX
    HAL_WRITE_UINT32(base+E7T_UART_CON, E7T_UART_CON_RXM_INT|E7T_UART_CON_TXM_INT);
}

开发者ID:lijinlei，项目名称:Kernel_BOOX60，代码行数:18，代码来源:hal_diag.c

示例14: cyg_hal_plf_serial_control

static int
cyg_hal_plf_serial_control(void *__ch_data, __comm_control_cmd_t __func, ...)
{
    static int irq_state = 0;
    channel_data_t* chan = (channel_data_t*)__ch_data;
    
    int ret = 0;
    CYGARC_HAL_SAVE_GP();

    switch (__func) {
    case __COMMCTL_GETBAUD:
        ret = chan->baud_rate;
        break;
    case __COMMCTL_SETBAUD:
        {
        va_list ap;
        va_start(ap, __func);
	
        ret = chan->baud_rate;
        chan->baud_rate = va_arg(ap, cyg_int32);
        init_serial_channel(chan);
	
        va_end(ap);
        }
        break;
    case __COMMCTL_IRQ_ENABLE:
	    // Just enable the interrupt on the IMB3. The debugged application is
        // must make sure that the interrupt is properly decoded
        HAL_INTERRUPT_UNMASK(chan->imb3_vector);
        irq_state = 1;
        break;
    case __COMMCTL_IRQ_DISABLE:
		// Same remark as above
        ret = irq_state;
        irq_state = 0;
        HAL_INTERRUPT_MASK(chan->imb3_vector);
        break;
    case __COMMCTL_DBG_ISR_VECTOR:
        ret = chan->imb3_vector;
        break;
    case __COMMCTL_SET_TIMEOUT:
        {
        va_list ap;
        va_start(ap, __func);

        ret = chan->msec_timeout;
        chan->msec_timeout = va_arg(ap, cyg_uint32);

        va_end(ap);
        }        
        break;
    default:
        break;
    }
    CYGARC_HAL_RESTORE_GP();
    return ret;
}

开发者ID:KarenHung，项目名称:ecosgit，代码行数:57，代码来源:hal_diag.c

示例15: cyg_hal_plf_serial_control

static int 
cyg_hal_plf_serial_control(void* __ch_data, __comm_control_cmd_t __func, ...)
{
  static int            irq_state     = 0;
  channel_data_t*       chan          = (channel_data_t*)__ch_data;
  volatile cyg_uint32*  pulBase       = chan->pulBase;
  int                   ret           = 0;
  cyg_uint8             status;

  CYGARC_HAL_SAVE_GP();

  switch (__func) 
  {
  case __COMMCTL_IRQ_ENABLE:
    irq_state = 1;
    // Ensure that only Receive ints are generated.
    status = pulBase[REL_Adr_uartcr / sizeof(cyg_uint8)];

    status |= (MSK_uartcr_RTIE | MSK_uartcr_RIE);
    pulBase[REL_Adr_uartcr / sizeof(cyg_uint8)] = status;

    HAL_INTERRUPT_UNMASK(chan->isr_vector);
    break;

  case __COMMCTL_IRQ_DISABLE:
    ret = irq_state;
    irq_state = 0;

    status = pulBase[REL_Adr_uartcr / sizeof(cyg_uint8)];
    status &= ~(MSK_uartcr_RTIE | MSK_uartcr_TIE | MSK_uartcr_RIE | MSK_uartcr_MSIE);
    pulBase[REL_Adr_uartcr / sizeof(cyg_uint8)] = status;

    HAL_INTERRUPT_MASK(chan->isr_vector);
    break;

  case __COMMCTL_DBG_ISR_VECTOR:
    ret = chan->isr_vector;
    break;

  case __COMMCTL_SET_TIMEOUT:
  {
    va_list ap;

    va_start(ap, __func);

    ret = chan->msec_timeout;
    chan->msec_timeout = va_arg(ap, cyg_uint32);

    va_end(ap);
  }
  default:
      break;
  }
  CYGARC_HAL_RESTORE_GP();
  return ret;
}

开发者ID:eartes，项目名称:netx_ecos_port，代码行数:56，代码来源:hal_diag.c

示例16: cyg_hal_plf_serial_control

static int
cyg_hal_plf_serial_control(void *__ch_data, __comm_control_cmd_t __func, ...)
{
    static int irq_state = 0;
    channel_data_t* chan = (channel_data_t*)__ch_data;
    cyg_uint8* base = ((channel_data_t*)__ch_data)->base;
    cyg_uint16 ser_port_reg;
    int ret = 0;
    va_list ap;

    CYGARC_HAL_SAVE_GP();
    va_start(ap, __func);

    switch (__func) {
    case __COMMCTL_GETBAUD:
        ret = chan->baud_rate;
        break;
    case __COMMCTL_SETBAUD:
        chan->baud_rate = va_arg(ap, cyg_int32);
        // Should we verify this value here?
        cyg_hal_plf_serial_init_channel(chan);
        ret = 0;
        break;
    case __COMMCTL_IRQ_ENABLE:
        irq_state = 1;
        HAL_INTERRUPT_ACKNOWLEDGE(chan->isr_vector);
        HAL_INTERRUPT_UNMASK(chan->isr_vector);

        HAL_READ_UINT16(FREESCALE_ESCI_CR12(base), ser_port_reg);
        ser_port_reg |= FREESCALE_ESCI_CR12_RIE;
        HAL_WRITE_UINT16(FREESCALE_ESCI_CR12(base), ser_port_reg);

        break;
    case __COMMCTL_IRQ_DISABLE:
        ret = irq_state;
        irq_state = 0;
        HAL_INTERRUPT_MASK(chan->isr_vector);

        HAL_READ_UINT16(FREESCALE_ESCI_CR12(base), ser_port_reg);
        ser_port_reg &= ~(cyg_uint16)FREESCALE_ESCI_CR12_RIE;
        HAL_WRITE_UINT16(FREESCALE_ESCI_CR12(base), ser_port_reg);
        break;
    case __COMMCTL_DBG_ISR_VECTOR:
        ret = chan->isr_vector;
        break;
    case __COMMCTL_SET_TIMEOUT:
        ret = chan->msec_timeout;
        chan->msec_timeout = va_arg(ap, cyg_uint32);
    default:
        break;
    }

    va_end(ap);
    CYGARC_HAL_RESTORE_GP();
    return ret;
}

开发者ID:houzhenggang，项目名称:ecos-1，代码行数:56，代码来源:hal_diag.c

示例17: hal_mpc5xx_remove_arbitration_isr

externC void
hal_mpc5xx_remove_arbitration_isr(hal_mpc5xx_arbitration_data * adata)
{
#ifdef CYGSEM_HAL_POWERPC_MPC5XX_IMB3_ARBITER  
  // Prevent anything from coming through while manipulating the list
  HAL_INTERRUPT_MASK(CYGNUM_HAL_INTERRUPT_SIU_LVL7);
  imb3_data_head = mpc5xx_remove(imb3_data_head, adata);
  HAL_INTERRUPT_UNMASK(CYGNUM_HAL_INTERRUPT_SIU_LVL7);
#endif
}

开发者ID:perryhg，项目名称:terkos，代码行数:10，代码来源:var_intr.c

示例18: net_io_control

static int
net_io_control(void *__ch_data, __comm_control_cmd_t __func, ...)
{
    static int vector = 0;
    int ret = 0;
    static int irq_state = 0;

    CYGARC_HAL_SAVE_GP();

    switch (__func) {
    case __COMMCTL_IRQ_ENABLE:
        irq_state = 1;
        if (vector == 0) {
            vector = eth_drv_int_vector();
        }
        HAL_INTERRUPT_UNMASK(vector); 
        break;
    case __COMMCTL_IRQ_DISABLE:
        ret = irq_state;
        irq_state = 0;
        if (vector == 0) {
            vector = eth_drv_int_vector();
        }
        HAL_INTERRUPT_MASK(vector);
        break;
    case __COMMCTL_DBG_ISR_VECTOR:
        ret = vector;
        break;
    case __COMMCTL_SET_TIMEOUT:
    {
        va_list ap;

        va_start(ap, __func);

        ret = _timeout;
        _timeout = va_arg(ap, cyg_uint32);

        va_end(ap);
        break;
    }
    case __COMMCTL_FLUSH_OUTPUT:
        net_io_flush();
        break;
    case __COMMCTL_ENABLE_LINE_FLUSH:
	flush_output_lines = true;
	break;
    case __COMMCTL_DISABLE_LINE_FLUSH:
	flush_output_lines = false;
	break;
    default:
        break;
    }
    CYGARC_HAL_RESTORE_GP();
    return ret;
}

开发者ID:perryhg，项目名称:terkos，代码行数:55，代码来源:net_io.c

示例19: cyg_hal_plf_serial_control

static int CYGOPT_HAL_KINETIS_DIAG_FLASH_SECTION_ATTR
cyg_hal_plf_serial_control(void *__ch_data, __comm_control_cmd_t __func, ...)
{
    channel_data_t* chan = (channel_data_t*)__ch_data;
    CYG_ADDRESS uart_p = ((channel_data_t*)__ch_data)->base;
    cyg_uint8 ser_port_reg;
    int ret = 0;
    va_list ap;

    CYGARC_HAL_SAVE_GP();
    va_start(ap, __func);

    switch (__func) {
    case __COMMCTL_IRQ_ENABLE:
        chan->irq_state = 1;
        HAL_INTERRUPT_ACKNOWLEDGE(chan->isr_vector);
        HAL_INTERRUPT_UNMASK(chan->isr_vector);

        HAL_READ_UINT8(uart_p + CYGHWR_DEV_FREESCALE_UART_C2, ser_port_reg);
        ser_port_reg |= CYGHWR_DEV_FREESCALE_UART_C2_RIE;
        HAL_WRITE_UINT8(uart_p + CYGHWR_DEV_FREESCALE_UART_C2, ser_port_reg);

        break;
    case __COMMCTL_IRQ_DISABLE:
        ret = chan->irq_state;
        chan->irq_state = 0;
        HAL_INTERRUPT_MASK(chan->isr_vector);

        HAL_READ_UINT8(uart_p + CYGHWR_DEV_FREESCALE_UART_C2, ser_port_reg);
        ser_port_reg &= ~(cyg_uint8)CYGHWR_DEV_FREESCALE_UART_C2_RIE;
        HAL_WRITE_UINT8(uart_p + CYGHWR_DEV_FREESCALE_UART_C2, ser_port_reg);
        break;
    case __COMMCTL_DBG_ISR_VECTOR:
        ret = chan->isr_vector;
        break;
    case __COMMCTL_SET_TIMEOUT:
        ret = chan->msec_timeout;
        chan->msec_timeout = va_arg(ap, cyg_uint32);
    case __COMMCTL_GETBAUD:
        ret = chan->baud_rate;
        break;
    case __COMMCTL_SETBAUD:
        chan->baud_rate = va_arg(ap, cyg_int32);
        // Should we verify this value here?
        cyg_hal_plf_serial_init_channel(chan);
        ret = 0;
        break;
    default:
        break;
    }

    va_end(ap);
    CYGARC_HAL_RESTORE_GP();
    return ret;
}

开发者ID:benchfox，项目名称:ecos，代码行数:55，代码来源:hal_diag.c

示例20: hal_variant_IRQ_init

externC void
hal_variant_IRQ_init(void)
{
    HAL_INTERRUPT_MASK (CYGNUM_EXPANSION);

    /* clear the mask register */
    HAL_WRITE_UINT32(INTR_MASK_REG, 0); /* all expansion interrupts are masked */

    HAL_INTERRUPT_ATTACH (CYGNUM_EXPANSION, &hal_extended_isr, 0, 0);
    HAL_INTERRUPT_UNMASK (CYGNUM_EXPANSION);
}

开发者ID:perryhg，项目名称:terkos，代码行数:11，代码来源:var_intr.c

注：本文中的HAL_INTERRUPT_MASK函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ HAL_IS_BIT_CLR函数代码示例发布时间：2022-05-30

C++ HAL_I2C_Init函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18269|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9677|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8177|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8548|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8457|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9388|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8428|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7862|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8411|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ HAL_INTERRUPT_MASK函数代码示例

示例1: cyg_hal_plf_serial_control

示例2: cyg_hal_plf_serial_init

示例3: init_ser

示例4: cyg_hal_plf_serial_init

示例5: hal_mpc5xx_remove_arbitration_isr

示例6: cyg_hal_plf_serial_init

示例7: cyg_hal_am33_serial_init

示例8: cyg_hal_plf_duart_init

示例9: cyg_hal_plf_serial_init

示例10: cyg_hal_plf_screen_init

示例11: cyg_hal_plf_serial_control

示例12: cyg_hal_ixp425_serial_init

示例13: cyg_hal_plf_serial_init_channel

示例14: cyg_hal_plf_serial_control

示例15: cyg_hal_plf_serial_control

示例16: cyg_hal_plf_serial_control

示例17: hal_mpc5xx_remove_arbitration_isr

示例18: net_io_control

示例19: cyg_hal_plf_serial_control

示例20: hal_variant_IRQ_init

请发表评论

全部评论

上一篇：

下一篇：

GitbookIO/gitbook:

juleswhite/mobile-cloud-asgn1

kyamagu/matlab-json: Use official API: h

墙壁眼睛膝盖

MATLAB数据类型 — 元胞（cell）

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053