C++ HAL_RTC_SetDate函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中HAL_RTC_SetDate函数的典型用法代码示例。如果您正苦于以下问题：C++ HAL_RTC_SetDate函数的具体用法？C++ HAL_RTC_SetDate怎么用？C++ HAL_RTC_SetDate使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了HAL_RTC_SetDate函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: MX_RTC_BACKUP_Init

void MX_RTC_BACKUP_Init(void){
	
  RTC_TimeTypeDef sTime;
  RTC_DateTypeDef sDate;
	
	if(HAL_RTCEx_BKUPRead(&hrtc,RTC_BKP_DR1) != TSTWORD){
	HAL_RTCEx_BKUPWrite(&hrtc,RTC_BKP_DR1, TSTWORD);

  sTime.Hours = 22;
  sTime.Minutes = 02;
  sTime.Seconds = 00;
		sTime.

  HAL_RTC_SetTime(&hrtc, &sTime, RTC_FORMAT_BIN);

	sDate.WeekDay = RTC_WEEKDAY_FRIDAY;
  sDate.Month = RTC_MONTH_APRIL;
  sDate.Date = 23;
  sDate.Year = 16;

  HAL_RTC_SetDate(&hrtc, &sDate, RTC_FORMAT_BIN);
	
		HAL_RTCEx_BKUPWrite(&hrtc, RTC_BKP_DR2,sDate.Month);
		HAL_RTCEx_BKUPWrite(&hrtc, RTC_BKP_DR3,sDate.Date);
		HAL_RTCEx_BKUPWrite(&hrtc, RTC_BKP_DR4,sDate.Year);
} else {
		sDate.Month = HAL_RTCEx_BKUPRead(&hrtc, RTC_BKP_DR2);
		sDate.Date = HAL_RTCEx_BKUPRead(&hrtc, RTC_BKP_DR3);
		sDate.Year = HAL_RTCEx_BKUPRead(&hrtc, RTC_BKP_DR4);
  HAL_RTC_SetDate(&hrtc, &sDate, RTC_FORMAT_BIN);
}
}

开发者ID:Casa2011，项目名称:devices，代码行数:32，代码来源:main.c

示例2: RTC_TimeStampConfig

/**
 * @brief  Configures the current time and date.
 * @param  None
 * @retval None
 */
static void RTC_TimeStampConfig(void)
{
    RTC_DateTypeDef sdatestructure;
    RTC_TimeTypeDef stimestructure;

    /*##-3- Configure the Date #################################################*/
    /* Set Date: Tuesday February 18th 2014 */
    sdatestructure.Year = 0x14;
    sdatestructure.Month = RTC_MONTH_FEBRUARY;
    sdatestructure.Date = 0x18;
    sdatestructure.WeekDay = RTC_WEEKDAY_TUESDAY;

    if(HAL_RTC_SetDate(&RtcHandle,&sdatestructure,FORMAT_BCD) != HAL_OK)
    {
        /* Initialization Error */
        Error_Handler();
    }

    /*##-4- Configure the Time #################################################*/
    /* Set Time: 08:10:00 */
    stimestructure.Hours = 0x08;
    stimestructure.Minutes = 0x10;
    stimestructure.Seconds = 0x00;
    stimestructure.TimeFormat = RTC_HOURFORMAT12_AM;
    stimestructure.DayLightSaving = RTC_DAYLIGHTSAVING_NONE ;
    stimestructure.StoreOperation = RTC_STOREOPERATION_RESET;

    if(HAL_RTC_SetTime(&RtcHandle,&stimestructure,FORMAT_BCD) != HAL_OK)
    {
        /* Initialization Error */
        Error_Handler();
    }
}

开发者ID:adibacco，项目名称:contiki，代码行数:38，代码来源:stm32cube_hal_init.c

示例3: BSP_RTC_Init

/**
 * @brief RTC Initialization function
 */
void BSP_RTC_Init(void)
{
  RTC_TimeTypeDef sTime;
  RTC_DateTypeDef sDate;

    /**Initialize RTC and set the Time and Date
    */
  hrtc_bsp.Instance = RTC;
  hrtc_bsp.Init.HourFormat = RTC_HOURFORMAT_24;
  hrtc_bsp.Init.AsynchPrediv = 127;               //LSI clock AsyncPrediv 127 HSE clock AsyncPrediv 124
  hrtc_bsp.Init.SynchPrediv = 255;               //LSI clock SyncPrediv  255  HSE clock SyncPrediv 7999
  hrtc_bsp.Init.OutPut = RTC_OUTPUT_DISABLE;
  hrtc_bsp.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
  hrtc_bsp.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;

  BSP_RTC_MspInit(&hrtc_bsp);
  HAL_RTC_Init(&hrtc_bsp);

  sTime.Hours = 0;
  sTime.Minutes = 0;
  sTime.Seconds = 0;
  sTime.SubSeconds = 0;
  sTime.TimeFormat = RTC_HOURFORMAT12_AM;
  sTime.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
  sTime.StoreOperation = RTC_STOREOPERATION_RESET;
  HAL_RTC_SetTime(&hrtc_bsp, &sTime, FORMAT_BIN);

  sDate.WeekDay = RTC_WEEKDAY_MONDAY;
  sDate.Month = RTC_MONTH_JANUARY;
  sDate.Date = 1;
  sDate.Year = 00;
  HAL_RTC_SetDate(&hrtc_bsp, &sDate, FORMAT_BIN);
}

开发者ID:glocklueng，项目名称:STM32F4-Dev，代码行数:36，代码来源:stm32f4_discovery_rtc.c

示例4: rtc_write

void rtc_write(time_t t) {
    RTC_DateTypeDef dateStruct;
    RTC_TimeTypeDef timeStruct;

    RtcHandle.Instance = RTC;

    // Convert the time into a tm
    struct tm *timeinfo = localtime(&t);

    // Fill RTC structures
    dateStruct.WeekDay        = timeinfo->tm_wday;
    dateStruct.Month          = timeinfo->tm_mon + 1;
    dateStruct.Date           = timeinfo->tm_mday;
    dateStruct.Year           = timeinfo->tm_year - 100;
    timeStruct.Hours          = timeinfo->tm_hour;
    timeStruct.Minutes        = timeinfo->tm_min;
    timeStruct.Seconds        = timeinfo->tm_sec;
    timeStruct.TimeFormat     = RTC_HOURFORMAT12_PM;
    timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
    timeStruct.StoreOperation = RTC_STOREOPERATION_RESET;

    // Change the RTC current date/time
    HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
    HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
}

开发者ID:logxen，项目名称:mbed，代码行数:25，代码来源:rtc_api.c

示例5: MX_RTC_Init

/* RTC init function */
void MX_RTC_Init(void)
{
  RTC_TimeTypeDef sTime;
  RTC_DateTypeDef DateToUpdate;

    /**Initialize RTC and set the Time and Date 
    */
  hrtc.Instance = RTC;
  hrtc.Init.AsynchPrediv = RTC_AUTO_1_SECOND;
  hrtc.Init.OutPut = RTC_OUTPUTSOURCE_NONE;
  HAL_RTC_Init(&hrtc);

  sTime.Hours = 0x10;
  sTime.Minutes = 0x6;
  sTime.Seconds = 0x24;

  HAL_RTC_SetTime(&hrtc, &sTime, RTC_FORMAT_BCD);

  DateToUpdate.WeekDay = RTC_WEEKDAY_MONDAY;
  DateToUpdate.Month = RTC_MONTH_AUGUST;
  DateToUpdate.Date = 0x15;
  DateToUpdate.Year = 0x16;

  HAL_RTC_SetDate(&hrtc, &DateToUpdate, RTC_FORMAT_BCD);

}

开发者ID:ZBT1314douhao，项目名称:STM32F107VCT6，代码行数:27，代码来源:rtc.c

示例6: RTC_CalendarConfig

/**
  * @brief  Configure the current time and date.
  * @param  None
  * @retval None
  */
static void RTC_CalendarConfig(void)
{
    RTC_DateTypeDef sdatestructure;
    RTC_TimeTypeDef stimestructure;

    /*##-1- Configure the Date #################################################*/
    /* Set Date: Tuesday April 14th 2015 */
    sdatestructure.Year = 0x14;
    sdatestructure.Month = RTC_MONTH_JANUARY;
    sdatestructure.Date = 0x01;
    sdatestructure.WeekDay = RTC_WEEKDAY_TUESDAY;

    if(HAL_RTC_SetDate(&RTCHandle,&sdatestructure,RTC_FORMAT_BCD) != HAL_OK)
    {
        /* Initialization Error */
        Error_Handler();
    }

    /*##-2- Configure the Time #################################################*/
    /* Set Time: 02:00:00 */
    stimestructure.Hours = 0x00;
    stimestructure.Minutes = 0x00;
    stimestructure.Seconds = 0x00;
    stimestructure.TimeFormat = RTC_HOURFORMAT12_AM;
    stimestructure.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
    stimestructure.StoreOperation = RTC_STOREOPERATION_RESET;

    if(HAL_RTC_SetTime(&RTCHandle,&stimestructure,RTC_FORMAT_BCD) != HAL_OK)
    {
        /* Initialization Error */
        Error_Handler();
    }

}

开发者ID:gilbertjuly，项目名称:cannon，代码行数:39，代码来源:stm32f401_lp_mode.c

示例7: Clocks_Init

void Clocks_Init(void)
{
    RCC_PeriphCLKInitTypeDef PeriphClkInitStruct;

    PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC;
//TODO: на реальном приборе кварц не 8 а 25 ћ√ц. исправить делитель
    PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_HSE_DIV8;		// RTCCLK = 1MHz
    HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);

    __HAL_RCC_RTC_ENABLE();

    hrtc.Instance = RTC;
    hrtc.Init.HourFormat = RTC_HOURFORMAT_24;
    hrtc.Init.AsynchPrediv = 124;
    hrtc.Init.SynchPrediv = 7999;
    hrtc.Init.OutPut = RTC_OUTPUT_DISABLE;
    hrtc.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
    hrtc.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
    HAL_RTC_Init(&hrtc);

    sTime.Hours = 1;
    sTime.Minutes = 1;
    sTime.Seconds = 1;
    sTime.SubSeconds = 0;
    sTime.TimeFormat = RTC_HOURFORMAT_24;
    sTime.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
    sTime.StoreOperation = RTC_STOREOPERATION_RESET;
    HAL_RTC_SetTime(&hrtc, &sTime, FORMAT_BCD);

    sDate.WeekDay = RTC_WEEKDAY_MONDAY;
    sDate.Month = RTC_MONTH_JANUARY;
    sDate.Date = 1;
    sDate.Year = 0;
    HAL_RTC_SetDate(&hrtc, &sDate, FORMAT_BCD);
}

开发者ID:bearxiong99，项目名称:SmI_IEC104，代码行数:35，代码来源:clocks.c

示例8: RTC_CalendarConfig

STATIC void RTC_CalendarConfig(void) {
    // set the date to 1st Jan 2015
    RTC_DateTypeDef date;
    date.Year = 15;
    date.Month = 1;
    date.Date = 1;
    date.WeekDay = RTC_WEEKDAY_THURSDAY;

    if(HAL_RTC_SetDate(&RTCHandle, &date, FORMAT_BIN) != HAL_OK) {
        // init error
        return;
    }

    // set the time to 00:00:00
    RTC_TimeTypeDef time;
    time.Hours = 0;
    time.Minutes = 0;
    time.Seconds = 0;
    time.TimeFormat = RTC_HOURFORMAT12_AM;
    time.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
    time.StoreOperation = RTC_STOREOPERATION_RESET;

    if (HAL_RTC_SetTime(&RTCHandle, &time, FORMAT_BIN) != HAL_OK) {
        // init error
        return;
    }
}

开发者ID:19emtuck，项目名称:micropython，代码行数:27，代码来源:rtc.c

示例9: MX_RTC_Init

/* RTC init function */
void MX_RTC_Init(void)
{

  RTC_TimeTypeDef sTime;
  RTC_DateTypeDef sDate;
  RTC_AlarmTypeDef sAlarm;

    /**Initialize RTC and set the Time and Date 
    */
  hrtc.Instance = RTC;
  hrtc.Init.HourFormat = RTC_HOURFORMAT_24;
  hrtc.Init.AsynchPrediv = 127;
  hrtc.Init.SynchPrediv = 255;
  hrtc.Init.OutPut = RTC_OUTPUT_DISABLE;
  hrtc.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
  hrtc.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
  HAL_RTC_Init(&hrtc);

  sTime.Hours = 0;
  sTime.Minutes = 0;
  sTime.Seconds = 0;
  sTime.SubSeconds = 0;
  sTime.TimeFormat = RTC_HOURFORMAT12_AM;
  sTime.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
  sTime.StoreOperation = RTC_STOREOPERATION_RESET;
  HAL_RTC_SetTime(&hrtc, &sTime, FORMAT_BIN);

  sDate.WeekDay = RTC_WEEKDAY_MONDAY;
  sDate.Month = RTC_MONTH_JANUARY;
  sDate.Date = 1;
  sDate.Year = 0;
  HAL_RTC_SetDate(&hrtc, &sDate, FORMAT_BIN);

    /**Enable the Alarm A 
    */
  sAlarm.AlarmTime.Hours = 0;
  sAlarm.AlarmTime.Minutes = 0;
  sAlarm.AlarmTime.Seconds = 0;
  sAlarm.AlarmTime.SubSeconds = 0;
  sAlarm.AlarmTime.TimeFormat = RTC_HOURFORMAT12_AM;
  sAlarm.AlarmTime.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
  sAlarm.AlarmTime.StoreOperation = RTC_STOREOPERATION_RESET;
  sAlarm.AlarmMask = RTC_ALARMMASK_NONE;
  sAlarm.AlarmSubSecondMask = RTC_ALARMSUBSECONDMASK_ALL;
  sAlarm.AlarmDateWeekDaySel = RTC_ALARMDATEWEEKDAYSEL_DATE;
  sAlarm.AlarmDateWeekDay = 1;
  sAlarm.Alarm = RTC_ALARM_A;
  HAL_RTC_SetAlarm_IT(&hrtc, &sAlarm, FORMAT_BIN);

    /**Enable the Alarm B 
    */
  sAlarm.Alarm = RTC_ALARM_B;
  HAL_RTC_SetAlarm_IT(&hrtc, &sAlarm, FORMAT_BIN);

    /**Enable the WakeUp 
    */
  HAL_RTCEx_SetWakeUpTimer_IT(&hrtc, 196, RTC_WAKEUPCLOCK_RTCCLK_DIV2);

}

开发者ID:will9twl，项目名称:FM24V10_I2C_FRAM，代码行数:60，代码来源:main.c

示例10: RTC_TimeStampConfig

/**
  * @brief  Configures the current time and date.
  * @param  None
  * @retval None
  */
static void RTC_TimeStampConfig(void)
{
  RTC_DateTypeDef sdatestructure;
  RTC_TimeTypeDef stimestructure;
  RTC_TamperTypeDef stamperstructure;
        
  /*##-1- Configure the Tamper ###############################################*/
  /* Configure Tamper registers */
  /* RTC Tamper configured as follow:
      - Pamper = Tamper1
      - Pin selection = PC13
      - Trigger = Falling Edge
      - TimeStamp On Tamper Detection = Enable */ 
  stamperstructure.Filter =  RTC_TAMPERFILTER_DISABLE;
  stamperstructure.Tamper = RTC_TAMPER_1;
  stamperstructure.PinSelection = RTC_TAMPERPIN_PC13;
  stamperstructure.Trigger = RTC_TAMPERTRIGGER_FALLINGEDGE;
  stamperstructure.SamplingFrequency = RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096;
  stamperstructure.PrechargeDuration = RTC_TAMPERPRECHARGEDURATION_1RTCCLK;
  stamperstructure.TamperPullUp = RTC_TAMPER_PULLUP_DISABLE;
  stamperstructure.TimeStampOnTamperDetection = RTC_TIMESTAMPONTAMPERDETECTION_ENABLE;
  HAL_RTCEx_SetTamper(&RtcHandle, &stamperstructure);
  
  /*##-2- Configure the Time Stamp peripheral ################################*/
  /*  RTC TimeStamp flag Generation: TimeStamp Rising Edge on PC13 Pin */
  HAL_RTCEx_SetTimeStamp_IT(&RtcHandle, RTC_TIMESTAMPEDGE_RISING, RTC_TIMESTAMPPIN_PC13);
  
  /* Clear the TIMESTAMP interrupt pending bit */
  __HAL_RTC_TIMESTAMP_CLEAR_FLAG(&RtcHandle,RTC_FLAG_TSF);
  
  /*##-3- Configure the Date #################################################*/
  /* Set Date: Tuesday February 18th 2014 */
  sdatestructure.Year = 0x14;
  sdatestructure.Month = RTC_MONTH_FEBRUARY;
  sdatestructure.Date = 0x18;
  sdatestructure.WeekDay = RTC_WEEKDAY_TUESDAY;
  
  if(HAL_RTC_SetDate(&RtcHandle,&sdatestructure,RTC_FORMAT_BCD) != HAL_OK)
  {
    /* Initialization Error */
    Error_Handler(); 
  } 
  
  /*##-4- Configure the Time #################################################*/
  /* Set Time: 08:10:00 */
  stimestructure.Hours = 0x08;
  stimestructure.Minutes = 0x10;
  stimestructure.Seconds = 0x00;
  stimestructure.TimeFormat = RTC_HOURFORMAT12_AM;
  stimestructure.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
  stimestructure.StoreOperation = RTC_STOREOPERATION_RESET;
  
  if(HAL_RTC_SetTime(&RtcHandle,&stimestructure,RTC_FORMAT_BCD) != HAL_OK)
  {
    /* Initialization Error */
    Error_Handler(); 
  }
}

开发者ID:PaxInstruments，项目名称:STM32CubeF4，代码行数:63，代码来源:main.c

示例11: MX_RTC_Init

/* RTC init function */
void MX_RTC_Init(void)
{
  RTC_TimeTypeDef sTime;
  RTC_DateTypeDef sDate;
  RTC_AlarmTypeDef sAlarm;

    /**Initialize RTC and set the Time and Date 
    */
  hrtc.Instance = RTC;
  hrtc.Init.HourFormat = RTC_HOURFORMAT_24;
  hrtc.Init.AsynchPrediv = 127;
  hrtc.Init.SynchPrediv = 255;
  hrtc.Init.OutPut = RTC_OUTPUT_DISABLE;
  hrtc.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
  hrtc.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
  HAL_RTC_Init(&hrtc);
	
/* USER CODE BEGIN*/
	rtc_backup_init();
  if(rtc_check()==0)
	{
		sTime.Hours = 16;
		sTime.Minutes = 52;
		sTime.Seconds = 50;
		sTime.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
		sTime.StoreOperation = RTC_STOREOPERATION_RESET;
		HAL_RTC_SetTime(&hrtc, &sTime, FORMAT_BIN);

		sDate.WeekDay = RTC_WEEKDAY_WEDNESDAY;
		sDate.Month = RTC_MONTH_APRIL;
		sDate.Date = 20;
		sDate.Year = 16;

		HAL_RTC_SetDate(&hrtc, &sDate, FORMAT_BIN);

			/**Enable the Alarm A 
			*/
		sAlarm.AlarmTime.Hours = 16;
		sAlarm.AlarmTime.Minutes = 53;
		sAlarm.AlarmTime.Seconds = 1;
		sAlarm.AlarmTime.SubSeconds = 0;
		sAlarm.AlarmTime.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
		sAlarm.AlarmTime.StoreOperation = RTC_STOREOPERATION_RESET;
		sAlarm.AlarmMask = RTC_ALARMMASK_DATEWEEKDAY;
		sAlarm.AlarmSubSecondMask = RTC_ALARMSUBSECONDMASK_ALL;
		sAlarm.AlarmDateWeekDaySel = RTC_ALARMDATEWEEKDAYSEL_DATE;
		sAlarm.AlarmDateWeekDay = 1;
		sAlarm.Alarm = RTC_ALARM_A;
		HAL_RTC_SetAlarm_IT(&hrtc, &sAlarm, FORMAT_BIN);
	}
/* USER CODE END*/
    /**Enable the WakeUp 
    */
  HAL_RTCEx_SetWakeUpTimer_IT(&hrtc, 10240, RTC_WAKEUPCLOCK_RTCCLK_DIV16);

}

开发者ID:hlmpost，项目名称:code_backup，代码行数:57，代码来源:rtc.c

示例12: RTC_Set_datetime

//------------------------------------------------------------------
void RTC_Set_datetime(uint8_t * data)
{
	uint8_t temp[3];
	RTC_DateTypeDef sdatestructure;
  RTC_TimeTypeDef stimestructure;
	if(data!=NULL)
	{
		osMutexWait(rtc_mutex, osWaitForever);

			sdatestructure.Year =data[0];
			sdatestructure.Month = data[1];
			sdatestructure.Date = data[2];
		  sdatestructure.WeekDay= CaculateWeekDay(data[0],data[1],data[2]);

			if(HAL_RTC_SetDate(&hrtc,&sdatestructure,RTC_FORMAT_BIN) != HAL_OK)
			{
				/* Initialization Error */
				Error_Handler("set time error"); 
			} 
			stimestructure.Hours = data[3];
			stimestructure.Minutes = data[4];
			stimestructure.Seconds = data[5];
			stimestructure.TimeFormat = RTC_HOURFORMAT12_AM;
			stimestructure.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
			stimestructure.StoreOperation = RTC_STOREOPERATION_RESET;
			if(HAL_RTC_SetTime(&hrtc,&stimestructure,RTC_FORMAT_BIN) != HAL_OK)
				{
					/* Initialization Error */
					Error_Handler("set date error"); 
				}	
#if 0				
					//flash lcd
		HAL_RTC_GetTime(&hrtc, &stimestructure, RTC_FORMAT_BIN);
		temp[0]=stimestructure.Hours;
		temp[1]=stimestructure.Minutes;
		temp[2]=stimestructure.Seconds;
		
		memcpy(&current_datetime[3],temp,3);
		
		/* Get the RTC current Date */
		HAL_RTC_GetDate(&hrtc, &sdatestructure, RTC_FORMAT_BIN);
		data[0]=sdatestructure.Year;
		data[1]=sdatestructure.Month;
		data[2]=sdatestructure.Date;
		current_datetime[6]=sdatestructure.WeekDay;
		memcpy(&current_datetime[0],data,3);
#endif
		if(disp_sort==0)
				send_message(4);

	  osMutexRelease(rtc_mutex);

	}//data=null
}

开发者ID:hlmpost，项目名称:code_backup，代码行数:55，代码来源:eric_rtc.c

示例13: RTC_AlarmConfig

/**
  * @brief  Configure the current time and date.
  * @param  None
  * @retval None
  */
static void RTC_AlarmConfig(void)
{
  RTC_DateTypeDef  sdatestructure;
  RTC_TimeTypeDef  stimestructure;
  RTC_AlarmTypeDef salarmstructure;
 
  /*##-1- Configure the Date #################################################*/
  /* Set Date: Tuesday February 18th 2014 */
  sdatestructure.Year = 0x14;
  sdatestructure.Month = RTC_MONTH_FEBRUARY;
  sdatestructure.Date = 0x18;
  sdatestructure.WeekDay = RTC_WEEKDAY_TUESDAY;
  
  if(HAL_RTC_SetDate(&RtcHandle,&sdatestructure,RTC_FORMAT_BCD) != HAL_OK)
  {
    /* Initialization Error */
    Error_Handler(); 
  } 
  
  /*##-2- Configure the Time #################################################*/
  /* Set Time: 02:20:00 */
  stimestructure.Hours = 0x02;
  stimestructure.Minutes = 0x20;
  stimestructure.Seconds = 0x00;
  stimestructure.TimeFormat = RTC_HOURFORMAT12_AM;
  stimestructure.DayLightSaving = RTC_DAYLIGHTSAVING_NONE ;
  stimestructure.StoreOperation = RTC_STOREOPERATION_RESET;
  
  if(HAL_RTC_SetTime(&RtcHandle,&stimestructure,RTC_FORMAT_BCD) != HAL_OK)
  {
    /* Initialization Error */
    Error_Handler(); 
  }  

  /*##-3- Configure the RTC Alarm peripheral #################################*/
  /* Set Alarm to 02:20:30 
     RTC Alarm Generation: Alarm on Hours, Minutes and Seconds */
  salarmstructure.Alarm = RTC_ALARM_A;
  salarmstructure.AlarmDateWeekDay = RTC_WEEKDAY_MONDAY;
  salarmstructure.AlarmDateWeekDaySel = RTC_ALARMDATEWEEKDAYSEL_DATE;
  salarmstructure.AlarmMask = RTC_ALARMMASK_DATEWEEKDAY;
  salarmstructure.AlarmSubSecondMask = RTC_ALARMSUBSECONDMASK_NONE;
  salarmstructure.AlarmTime.TimeFormat = RTC_HOURFORMAT12_AM;
 salarmstructure.AlarmTime.Hours = 0x02;
  salarmstructure.AlarmTime.Minutes = 0x20;
  salarmstructure.AlarmTime.Seconds = 0x30;
  salarmstructure.AlarmTime.SubSeconds = 0x56;
  
  if(HAL_RTC_SetAlarm_IT(&RtcHandle,&salarmstructure,RTC_FORMAT_BCD) != HAL_OK)
  {
    /* Initialization Error */
    Error_Handler(); 
  }
}

开发者ID:451506709，项目名称:automated_machine，代码行数:59，代码来源:main.c

示例14: RtcSetConfig

static void RtcSetConfig( void )
{
  RTC_TimeTypeDef RTC_TimeStruct;
  RTC_DateTypeDef RTC_DateStruct;
  //RTC_AlarmTypeDef salarmstructure;

	/* Enable Ultra low power mode */
  HAL_PWREx_EnableUltraLowPower();

	/* Enable the fast wake up from Ultra low power mode */
  HAL_PWREx_EnableFastWakeUp();

  /* Select HSI as system clock source after Wake Up from Stop mode */
  __HAL_RCC_WAKEUPSTOP_CLK_CONFIG(RCC_StopWakeUpClock_HSI);

  /*##-1- Configure the RTC peripheral #######################################*/
  /* Configure RTC prescaler and RTC data registers */
  /* RTC configured as follow:
      - Hour Format    = Format 24
      - Asynch Prediv  = Value according to source clock
      - Synch Prediv   = Value according to source clock
      - OutPut         = Output Disable
      - OutPutPolarity = High Polarity
      - OutPutType     = Open Drain */      
  RTCHandle.Instance = RTC;
  RTCHandle.Init.HourFormat = RTC_HOURFORMAT_24;
  RTCHandle.Init.AsynchPrediv = RTC_ASYNCH_PREDIV;
  RTCHandle.Init.SynchPrediv = RTC_SYNCH_PREDIV;
  RTCHandle.Init.OutPut = RTC_OUTPUT_DISABLE;
  RTCHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
  RTCHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;

  HAL_RTC_Init(&RTCHandle);

  //Initiate data and time

	RTC_TimeStruct.TimeFormat = RTC_HOURFORMAT12_AM;
  RTC_TimeStruct.Hours = 0x00;
  RTC_TimeStruct.Minutes = 0x00;
  RTC_TimeStruct.Seconds = 0x00;
  RTC_TimeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE ;
  RTC_TimeStruct.StoreOperation = RTC_STOREOPERATION_RESET;
	HAL_RTC_SetTime(&RTCHandle,&RTC_TimeStruct,FORMAT_BIN);

   // RTC_TimeStructInit( &RTC_TimeStruct );
	RTC_DateStruct.WeekDay = RTC_WEEKDAY_SATURDAY;
  RTC_DateStruct.Date = 0x01;
  RTC_DateStruct.Month = RTC_MONTH_JANUARY;
  RTC_DateStruct.Year = 0x01;

  HAL_RTC_SetDate(&RTCHandle,&RTC_DateStruct,FORMAT_BIN);

}

开发者ID:qlcGit，项目名称:NPLink-Mote-STM32-SDK，代码行数:53，代码来源:rtc_board.c

示例15: MX_RTC_Init

/* RTC init function */
void MX_RTC_Init(void)
{
  RTC_TimeTypeDef sTime;
  RTC_DateTypeDef sDate;

    /**Initialize RTC Only 
    */
  hrtc.Instance = RTC;
  hrtc.Init.HourFormat = RTC_HOURFORMAT_24;
  hrtc.Init.AsynchPrediv = 127;
  hrtc.Init.SynchPrediv = 255;
  hrtc.Init.OutPut = RTC_OUTPUT_DISABLE;
  hrtc.Init.OutPutRemap = RTC_OUTPUT_REMAP_NONE;
  hrtc.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
  hrtc.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
  if (HAL_RTC_Init(&hrtc) != HAL_OK)
  {
    _Error_Handler(__FILE__, __LINE__);
  }

    /**Initialize RTC and set the Time and Date 
    */
  if(HAL_RTCEx_BKUPRead(&hrtc, RTC_BKP_DR0) != 0x32F2){
  sTime.Hours = 0x0;
  sTime.Minutes = 0x0;
  sTime.Seconds = 0x0;
  sTime.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
  sTime.StoreOperation = RTC_STOREOPERATION_RESET;
  if (HAL_RTC_SetTime(&hrtc, &sTime, RTC_FORMAT_BCD) != HAL_OK)
  {
    _Error_Handler(__FILE__, __LINE__);
  }

  sDate.WeekDay = RTC_WEEKDAY_MONDAY;
  sDate.Month = RTC_MONTH_JANUARY;
  sDate.Date = 0x1;
  sDate.Year = 0x0;

  if (HAL_RTC_SetDate(&hrtc, &sDate, RTC_FORMAT_BCD) != HAL_OK)
  {
    _Error_Handler(__FILE__, __LINE__);
  }

    HAL_RTCEx_BKUPWrite(&hrtc,RTC_BKP_DR0,0x32F2);
  }
    /**Enable the WakeUp 
    */
  if (HAL_RTCEx_SetWakeUpTimer_IT(&hrtc, 5, RTC_WAKEUPCLOCK_CK_SPRE_16BITS) != HAL_OK)
  {
    _Error_Handler(__FILE__, __LINE__);
  }

}

开发者ID:theapi，项目名称:solar，代码行数:54，代码来源:rtc.c

示例16: MX_RTC_Init

/* RTC init function */
void MX_RTC_Init(void)
{

  RTC_TimeTypeDef sTime;
  RTC_DateTypeDef sDate;


    /**Initialize RTC and set the Time and Date 
    */
  hrtc.Instance = RTC;
  hrtc.Init.HourFormat = RTC_HOURFORMAT_24;
  hrtc.Init.AsynchPrediv = 127;
  hrtc.Init.SynchPrediv = 255;
  hrtc.Init.OutPut = RTC_OUTPUT_DISABLE;
  hrtc.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
  hrtc.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
 HAL_RTC_Init(&hrtc);

  sTime.Hours = 0x17;
  sTime.Minutes = 0x3B;
  sTime.Seconds = 0x0;
  sTime.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
  sTime.StoreOperation = RTC_STOREOPERATION_RESET;
  HAL_RTC_SetTime(&hrtc, &sTime, FORMAT_BIN);

  sDate.WeekDay = RTC_WEEKDAY_MONDAY;
  sDate.Month = RTC_MONTH_JANUARY;
  sDate.Date = 0x1;
  sDate.Year = 0x0;

  HAL_RTC_SetDate(&hrtc, &sDate, FORMAT_BIN);

    /**Enable the Alarm A 
    */
  sAlarm.AlarmTime.Hours = 0x17;
  sAlarm.AlarmTime.Minutes = 0x3B;
  sAlarm.AlarmTime.Seconds = 0x9;
  sAlarm.AlarmTime.SubSeconds = 0x0;
  sAlarm.AlarmTime.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
  sAlarm.AlarmTime.StoreOperation = RTC_STOREOPERATION_RESET;
  sAlarm.AlarmMask = RTC_ALARMMASK_DATEWEEKDAY;
  sAlarm.AlarmSubSecondMask = RTC_ALARMSUBSECONDMASK_ALL;
  sAlarm.AlarmDateWeekDaySel = RTC_ALARMDATEWEEKDAYSEL_DATE;
  sAlarm.AlarmDateWeekDay = 0x1;
  sAlarm.Alarm = RTC_ALARM_A;
//  HAL_RTC_SetAlarm_IT(&hrtc, &sAlarm, FORMAT_BIN);

  //__HAL_RCC_RTC_ENABLE(); 
  /*##-4- Configure the NVIC for RTC Alarm ###################################*/
	
}

开发者ID:Csatacsibe，项目名称:Vadalarm_quad，代码行数:52，代码来源:main.c

示例17: rtcSetDateTime

void rtcSetDateTime(RTC_DateTypeDef *date, RTC_TimeTypeDef *time)
{
    if(HAL_RTC_SetDate(&RtcHandle,date,FORMAT_BIN) != HAL_OK)
    {
        /* Initialization Error */
        Error_Handler();
    }

    if(HAL_RTC_SetTime(&RtcHandle,time,FORMAT_BIN) != HAL_OK)
    {
        /* Error */
        Error_Handler();
    }
}

开发者ID:FlankerZ，项目名称:epaper_cnt，代码行数:14，代码来源:rtc.c

示例18: RTC_AlarmConfig

/**
  * @brief  Configure the current time and date.
  * @param  None
  * @retval None
  */
static void RTC_AlarmConfig(void)
{
  RTC_DateTypeDef  sdatestructure;
  RTC_TimeTypeDef  stimestructure;
  RTC_AlarmTypeDef salarmstructure;
 
  /*##-1- Configure the Date #################################################*/
  /* Set Date: Tuesday February 18th 2014 */
  sdatestructure.Year = 0x14;
  sdatestructure.Month = RTC_MONTH_FEBRUARY;
  sdatestructure.Date = 0x18;
  sdatestructure.WeekDay = RTC_WEEKDAY_TUESDAY;
  
  if(HAL_RTC_SetDate(&RtcHandle,&sdatestructure,RTC_FORMAT_BCD) != HAL_OK)
  {
    /* Initialization Error */
    Error_Handler(); 
  } 
  
  /*##-2- Configure the Time #################################################*/
  /* Set Time: 02:20:00 */
  stimestructure.Hours = 0x02;
  stimestructure.Minutes = 0x20;
  stimestructure.Seconds = 0x00;
  
  if(HAL_RTC_SetTime(&RtcHandle,&stimestructure,RTC_FORMAT_BCD) != HAL_OK)
  {
    /* Initialization Error */
    Error_Handler(); 
  }  

  /*##-3- Configure the RTC Alarm peripheral #################################*/
  /* Set Alarm to 02:20:30 
     RTC Alarm Generation: Alarm on Hours, Minutes and Seconds */
  salarmstructure.Alarm = RTC_ALARM_A;
 salarmstructure.AlarmTime.Hours = 0x02;
  salarmstructure.AlarmTime.Minutes = 0x20;
  salarmstructure.AlarmTime.Seconds = 0x30;
  
  if(HAL_RTC_SetAlarm_IT(&RtcHandle,&salarmstructure,RTC_FORMAT_BCD) != HAL_OK)
  {
    /* Initialization Error */
    Error_Handler(); 
  }
}

开发者ID:Lembed，项目名称:STM32CubeF1-mirrors，代码行数:50，代码来源:main.c

示例19: pyb_rtc_datetime

mp_obj_t pyb_rtc_datetime(mp_uint_t n_args, const mp_obj_t *args) {
    rtc_init_finalise();
    if (n_args == 1) {
        // get date and time
        // note: need to call get time then get date to correctly access the registers
        RTC_DateTypeDef date;
        RTC_TimeTypeDef time;
        HAL_RTC_GetTime(&RTCHandle, &time, FORMAT_BIN);
        HAL_RTC_GetDate(&RTCHandle, &date, FORMAT_BIN);
        mp_obj_t tuple[8] = {
            mp_obj_new_int(2000 + date.Year),
            mp_obj_new_int(date.Month),
            mp_obj_new_int(date.Date),
            mp_obj_new_int(date.WeekDay),
            mp_obj_new_int(time.Hours),
            mp_obj_new_int(time.Minutes),
            mp_obj_new_int(time.Seconds),
            mp_obj_new_int(rtc_subsec_to_us(time.SubSeconds)),
        };
        return mp_obj_new_tuple(8, tuple);
    } else {
        // set date and time
        mp_obj_t *items;
        mp_obj_get_array_fixed_n(args[1], 8, &items);

        RTC_DateTypeDef date;
        date.Year = mp_obj_get_int(items[0]) - 2000;
        date.Month = mp_obj_get_int(items[1]);
        date.Date = mp_obj_get_int(items[2]);
        date.WeekDay = mp_obj_get_int(items[3]);
        HAL_RTC_SetDate(&RTCHandle, &date, FORMAT_BIN);

        RTC_TimeTypeDef time;
        time.Hours = mp_obj_get_int(items[4]);
        time.Minutes = mp_obj_get_int(items[5]);
        time.Seconds = mp_obj_get_int(items[6]);
        time.SubSeconds = rtc_us_to_subsec(mp_obj_get_int(items[7]));
        time.TimeFormat = RTC_HOURFORMAT12_AM;
        time.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
        time.StoreOperation = RTC_STOREOPERATION_SET;
        HAL_RTC_SetTime(&RTCHandle, &time, FORMAT_BIN);

        return mp_const_none;
    }
}

开发者ID:19emtuck，项目名称:micropython，代码行数:45，代码来源:rtc.c

示例20: RtcInit

void RtcInit( void )
{
    RtcCalendar_t rtcInit;

    if( RtcInitialized == false )
    {
        __HAL_RCC_RTC_ENABLE( );

        RtcHandle.Instance = RTC;
        RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24;
        RtcHandle.Init.AsynchPrediv = PREDIV_A; // RTC_ASYNCH_PREDIV;
        RtcHandle.Init.SynchPrediv = PREDIV_S;  // RTC_SYNCH_PREDIV;

        RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE;
        RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
        RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
        HAL_RTC_Init( &RtcHandle );

        // Set Date: Friday 1st of January 2000
        rtcInit.CalendarDate.Year = 0;
        rtcInit.CalendarDate.Month = RTC_MONTH_JANUARY;
        rtcInit.CalendarDate.Date = 1;
        rtcInit.CalendarDate.WeekDay = RTC_WEEKDAY_SATURDAY;
        HAL_RTC_SetDate( &RtcHandle, &rtcInit.CalendarDate, RTC_FORMAT_BIN );

        // Set Time: 00:00:00
        rtcInit.CalendarTime.Hours = 0;
        rtcInit.CalendarTime.Minutes = 0;
        rtcInit.CalendarTime.Seconds = 0;
        rtcInit.CalendarTime.SecondFraction = 0;
        rtcInit.CalendarTime.TimeFormat = RTC_HOURFORMAT12_AM;
        rtcInit.CalendarTime.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
        rtcInit.CalendarTime.StoreOperation = RTC_STOREOPERATION_RESET;
        HAL_RTC_SetTime( &RtcHandle, &rtcInit.CalendarTime, RTC_FORMAT_BIN );

        // Enable Direct Read of the calendar registers (not through Shadow registers)
        HAL_RTCEx_EnableBypassShadow( &RtcHandle );

        HAL_NVIC_SetPriority( RTC_Alarm_IRQn, 1, 0 );
        HAL_NVIC_EnableIRQ( RTC_Alarm_IRQn );
        RtcInitialized = true;
    }
}

开发者ID:Lora-net，项目名称:LoRaMac-node，代码行数:43，代码来源:rtc-board.c

注：本文中的HAL_RTC_SetDate函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ HAL_SPI_Init函数代码示例发布时间：2022-05-30

C++ HAL_RTC_GetTime函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18268|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9677|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8177|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8548|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8457|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9388|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8427|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7862|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8411|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ HAL_RTC_SetDate函数代码示例

示例1: MX_RTC_BACKUP_Init

示例2: RTC_TimeStampConfig

示例3: BSP_RTC_Init

示例4: rtc_write

示例5: MX_RTC_Init

示例6: RTC_CalendarConfig

示例7: Clocks_Init

示例8: RTC_CalendarConfig

示例9: MX_RTC_Init

示例10: RTC_TimeStampConfig

示例11: MX_RTC_Init

示例12: RTC_Set_datetime

示例13: RTC_AlarmConfig

示例14: RtcSetConfig

示例15: MX_RTC_Init

示例16: MX_RTC_Init

示例17: rtcSetDateTime

示例18: RTC_AlarmConfig

示例19: pyb_rtc_datetime

示例20: RtcInit

请发表评论

全部评论

上一篇：

下一篇：

bradtraversy/iweather: Ionic 3 mobile we

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

CVE-2022-34114

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053