int get_ehci_connect_status(int usbc_no)
{
    struct usb_hcd 	*hcd 	= NULL;
	struct ehci_hcd *ehci	= NULL;
	struct sw_hci_hcd *sw_ehci = NULL;
	int	port;
	int connect = 0;

    if(usbc_no < 0 || usbc_no > 2){
        printk("usbc_no : %d invalid\n", usbc_no);
        return 0;
    }
	sw_ehci = g_sw_ehci[usbc_no];
    if(!sw_ehci){        
        return 0;
    }
	hcd = sw_ehci->hcd;
    if(!hcd){        
        return 0;
    }
	ehci = hcd_to_ehci(hcd);
	if(!ehci){        
        return 0;
    }
    
    port = HCS_N_PORTS(ehci->hcs_params);
    while(port--)
        connect |= readl(&ehci->regs->port_status[port]) & PORT_CONNECT;

    return connect;
}

/*
 * Dedicate or undedicate a port to the companion controller.
 * Syntax is "[-]portnum", where a leading '-' sign means
 * return control of the port to the EHCI controller.
 */
static ssize_t store_companion(struct device *dev,
                               struct device_attribute *attr,
                               const char *buf, size_t count)
{
    struct ehci_hcd		*ehci;
    int			portnum, new_owner;

    ehci = hcd_to_ehci(dev_get_drvdata(dev));
    new_owner = PORT_OWNER;		/* Owned by companion */
    if (sscanf(buf, "%d", &portnum) != 1)
        return -EINVAL;
    if (portnum < 0) {
        portnum = - portnum;
        new_owner = 0;		/* Owned by EHCI */
    }
    if (portnum <= 0 || portnum > HCS_N_PORTS(ehci->hcs_params))
        return -ENOENT;
    portnum--;
    if (new_owner)
        set_bit(portnum, &ehci->companion_ports);
    else
        clear_bit(portnum, &ehci->companion_ports);
    set_owner(ehci, portnum, new_owner);
    return count;
}

static void
ehci_hub_descriptor (
	struct ehci_hcd			*ehci,
	struct usb_hub_descriptor	*desc
) {
	int		ports = HCS_N_PORTS (ehci->hcs_params);
	u16		temp;

	desc->bDescriptorType = 0x29;
	desc->bPwrOn2PwrGood = 0;	/* FIXME: f(system power) */
	desc->bHubContrCurrent = 0;

	desc->bNbrPorts = ports;
	temp = 1 + (ports / 8);
	desc->bDescLength = 7 + 2 * temp;

	/* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
	memset (&desc->bitmap [0], 0, temp);
	memset (&desc->bitmap [temp], 0xff, temp);

	temp = 0x0008;			/* per-port overcurrent reporting */
	if (HCS_PPC (ehci->hcs_params))
		temp |= 0x0001;		/* per-port power control */
	if (HCS_INDICATOR (ehci->hcs_params))
		temp |= 0x0080;		/* per-port indicators (LEDs) */
	desc->wHubCharacteristics = cpu_to_le16 (temp);
}

static int ci_imx_ehci_bus_resume(struct usb_hcd *hcd)
{
	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
	int port;

	int ret = orig_bus_resume(hcd);

	if (ret)
		return ret;

	port = HCS_N_PORTS(ehci->hcs_params);
	while (port--) {
		u32 __iomem *reg = &ehci->regs->port_status[port];
		u32 portsc = ehci_readl(ehci, reg);
		/*
		 * Notify PHY after resume signal has finished, it is
		 * for global suspend case.
		 */
		if (hcd->usb_phy
			&& test_bit(port, &ehci->bus_suspended)
			&& (portsc & PORT_CONNECT)
			&& (ehci_port_speed(ehci, portsc) ==
				USB_PORT_STAT_HIGH_SPEED))
			/* notify the USB PHY */
			usb_phy_notify_resume(hcd->usb_phy, USB_SPEED_HIGH);
	}

	return 0;
}

static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable)
{
	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
	struct ehci_ci_priv *priv = (struct ehci_ci_priv *)ehci->priv;
	struct device *dev = hcd->self.controller;
	int ret = 0;
	int port = HCS_N_PORTS(ehci->hcs_params);

	if (priv->reg_vbus) {
		if (port > 1) {
			dev_warn(dev,
				"Not support multi-port regulator control\n");
			return 0;
		}
		if (enable)
			ret = regulator_enable(priv->reg_vbus);
		else
			ret = regulator_disable(priv->reg_vbus);
		if (ret) {
			dev_err(dev,
				"Failed to %s vbus regulator, ret=%d\n",
				enable ? "enable" : "disable", ret);
			return ret;
		}
	}
	return 0;
};

/* ehci_brcm_hub_control
 * Intercept echi-hcd request to complete RESUME and align it to the start
 * of the next microframe.
 * If RESUME is complete too late in the microframe, host controller
 * detects babble on suspended port and resets the port afterwards.
 * This s/w workaround allows to avoid this problem.
 * See http://jira.broadcom.com/browse/SWLINUX-1909 for more details
 */
static int ehci_brcm_hub_control(
	struct usb_hcd	*hcd,
	u16		typeReq,
	u16		wValue,
	u16		wIndex,
	char		*buf,
	u16		wLength)
{
	struct ehci_hcd	*ehci = hcd_to_ehci(hcd);
	int		ports = HCS_N_PORTS(ehci->hcs_params);
	u32 __iomem	*status_reg = &ehci->regs->port_status[
				(wIndex & 0xff) - 1];
	unsigned long flags;
	int retval, irq_disabled = 0;

	/* RESUME is cleared when GetPortStatus() is called 20ms after start
	  of RESUME */
	if ((typeReq == GetPortStatus) &&
	    (wIndex && wIndex <= ports) &&
	    ehci->reset_done[wIndex-1] &&
	    time_after_eq(jiffies, ehci->reset_done[wIndex-1]) &&
	    (ehci_readl(ehci, status_reg) & PORT_RESUME)) {
		/* to make sure we are not interrupted until RESUME bit
		  is cleared, disable interrupts on current CPU */
		ehci_dbg(ehci, "SOF alignment workaround\n");
		irq_disabled = 1;
		local_irq_save(flags);
		ehci_brcm_wait_for_sof(ehci, 5);
	}

	retval = ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
	if (irq_disabled)
		local_irq_restore(flags);
	return retval;
}

static void ehci_hsic_phy_power(struct ehci_hcd *ehci, int is_low_power)
{
	unsigned port;

	port = HCS_N_PORTS(ehci->hcs_params);
	while (port--) {
		u32 __iomem	*hostpc_reg;
		u32		t3;

		hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
				+ 0x84 + 4 * port);
		t3 = ehci_readl(ehci, hostpc_reg);
		ehci_dbg(ehci, "Port %d phy low-power mode org %08x\n",
				port, t3);

		if (is_low_power)
			ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg);
		else
			ehci_writel(ehci, t3 & ~HOSTPC_PHCD, hostpc_reg);

		t3 = ehci_readl(ehci, hostpc_reg);
		ehci_dbg(ehci, "Port %d phy low-power mode chg %08x\n",
				port, t3);
	}
}

// mainly a copy of ehci_run(), can perhaps be reduced:
static int ehci_msm_run(struct usb_hcd *hcd)
{
	struct ehci_hcd *ehci  = hcd_to_ehci(hcd);
	int             retval = 0;
	int     	port   = HCS_N_PORTS(ehci->hcs_params);
	u32 __iomem     *reg_ptr;
	u32             hcc_params;

	hcd->uses_new_polling = 1;
	hcd->poll_rh = 0;

	/* set hostmode */
	reg_ptr = (u32 __iomem *)(((u8 __iomem *)ehci->regs) + USBMODE);
	ehci_writel(ehci, (USBMODE_VBUS | USBMODE_SDIS), reg_ptr);

	/* port configuration - phy, port speed, port power, port enable */
	while (port--)
		ehci_writel(ehci, (PORTSC_PTS_ULPI | PORT_POWER |
				PORT_PE), &ehci->regs->port_status[port]);

	ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
	ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next);

	hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
	if (HCC_64BIT_ADDR(hcc_params))
		ehci_writel(ehci, 0, &ehci->regs->segment);

	ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
	ehci->command |= CMD_RUN;
	ehci_writel(ehci, ehci->command, &ehci->regs->command);

	/*
	 * Start, enabling full USB 2.0 functionality ... usb 1.1 devices
	 * are explicitly handed to companion controller(s), so no TT is
	 * involved with the root hub.  (Except where one is integrated,
	 * and there's no companion controller unless maybe for USB OTG.)
	 *
	 * Turning on the CF flag will transfer ownership of all ports
	 * from the companions to the EHCI controller.  If any of the
	 * companions are in the middle of a port reset at the time, it
	 * could cause trouble.  Write-locking ehci_cf_port_reset_rwsem
	 * guarantees that no resets are in progress.  After we set CF,
	 * a short delay lets the hardware catch up; new resets shouldn't
	 * be started before the port switching actions could complete.
	 */

	down_write(&ehci_cf_port_reset_rwsem);
	hcd->state = HC_STATE_RUNNING;
	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
	ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
	msleep(5);
	up_write(&ehci_cf_port_reset_rwsem);

	/*Enable appropriate Interrupts*/
	ehci_writel(ehci, INTR_MASK,
			&ehci->regs->intr_enable);

	return retval;
}

/* On some systems, leaving remote wakeup enabled prevents system shutdown.
 * The firmware seems to think that powering off is a wakeup event!
 * This routine turns off remote wakeup and everything else, on all ports.
 */
static void ehci_turn_off_all_ports(struct ehci_hcd *ehci)
{
	int	port = HCS_N_PORTS(ehci->hcs_params);

	while (port--)
		ehci_writel(ehci, PORT_RWC_BITS,
				&ehci->regs->port_status[port]);
}

static void ehci_port_power (struct ehci_hcd *ehci, int is_on)
{
	unsigned port;

	if (!HCS_PPC (ehci->hcs_params))
		return;

	ehci_dbg (ehci, "...power%s ports...\n", is_on ? "up" : "down");
	for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; )
		(void) ehci_hub_control(ehci_to_hcd(ehci),
				is_on ? SetPortFeature : ClearPortFeature,
				USB_PORT_FEAT_POWER,
				port--, NULL, 0);
	msleep(20);
}

/* this file is part of ehci-hcd.c */
static int __maybe_unused ehci_lpm_set_da(struct ehci_hcd *ehci, int dev_addr, int port_num)
{
	u32 __iomem portsc;

	ehci_dbg(ehci, "set dev address %d for port %d\n", dev_addr, port_num);
	if (port_num > HCS_N_PORTS(ehci->hcs_params)) {
		ehci_dbg(ehci, "invalid port number %d\n", port_num);
		return -ENODEV;
	}
	portsc = ehci_readl(ehci, &ehci->regs->port_status[port_num-1]);
	portsc &= ~PORT_DEV_ADDR;
	portsc |= dev_addr<<25;
	ehci_writel(ehci, portsc, &ehci->regs->port_status[port_num-1]);
	return 0;
}

static void ehci_hsic_port_power(struct ehci_hcd *ehci, int is_on)
{
	unsigned port;

	if (!HCS_PPC(ehci->hcs_params))
		return;

	dev_dbg(&pci_dev->dev, "...power%s ports...\n", is_on ? "up" : "down");
	for (port = HCS_N_PORTS(ehci->hcs_params); port > 0; )
		(void) ehci_hub_control(ehci_to_hcd(ehci),
				is_on ? SetPortFeature : ClearPortFeature,
				USB_PORT_FEAT_POWER,
				port--, NULL, 0);
	/* Flush those writes */
	ehci_readl(ehci, &ehci->regs->command);
}

static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable)
{
	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
	struct ehci_ci_priv *priv = (struct ehci_ci_priv *)ehci->priv;
	struct device *dev = hcd->self.controller;
	struct ci_hdrc *ci = dev_get_drvdata(dev);
	int ret = 0;
	int port = HCS_N_PORTS(ehci->hcs_params);

	if (priv->reg_vbus) {
		if (port > 1) {
			dev_warn(dev,
				"Not support multi-port regulator control\n");
			return 0;
		}
		if (enable)
			ret = regulator_enable(priv->reg_vbus);
		else
			ret = regulator_disable(priv->reg_vbus);
		if (ret) {
			dev_err(dev,
				"Failed to %s vbus regulator, ret=%d\n",
				enable ? "enable" : "disable", ret);
			return ret;
		}
	}

	if (ci->platdata->flags & CI_HDRC_PHY_VBUS_CONTROL &&
			ci->usb_phy && ci->usb_phy->set_vbus) {
		if (enable)
			ci->usb_phy->set_vbus(ci->usb_phy, 1);
		else
			ci->usb_phy->set_vbus(ci->usb_phy, 0);
	}

	if (enable && (ci->platdata->phy_mode == USBPHY_INTERFACE_MODE_HSIC)) {
		/*
		 * Marvell 28nm HSIC PHY requires forcing the port to HS mode.
		 * As HSIC is always HS, this should be safe for others.
		 */
		hw_port_test_set(ci, 5);
		hw_port_test_set(ci, 0);
	}

	return 0;
};

static int
ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
{
	struct ehci_hcd	*ehci = hcd_to_ehci (hcd);
	u32		temp, status = 0;
	int		ports, i, retval = 1;
	unsigned long	flags;

	/* init status to no-changes */
	buf [0] = 0;
	ports = HCS_N_PORTS (ehci->hcs_params);
	if (ports > 7) {
		buf [1] = 0;
		retval++;
	}
	
	/* no hub change reports (bit 0) for now (power, ...) */

	/* port N changes (bit N)? */
	spin_lock_irqsave (&ehci->lock, flags);
	for (i = 0; i < ports; i++) {
		temp = readl (&ehci->regs->port_status [i]);
		if (temp & PORT_OWNER) {
			/* don't report this in GetPortStatus */
			if (temp & PORT_CSC) {
				temp &= ~PORT_CSC;
				writel (temp, &ehci->regs->port_status [i]);
			}
			continue;
		}
		if (!(temp & PORT_CONNECT))
			ehci->reset_done [i] = 0;
		if ((temp & (PORT_CSC | PORT_PEC | PORT_OCC)) != 0) {
			if (i < 7)
			    buf [0] |= 1 << (i + 1);
			else
			    buf [1] |= 1 << (i - 7);
			status = STS_PCD;
		}
	}
	spin_unlock_irqrestore (&ehci->lock, flags);
	return status ? retval : 0;
}

static int ehci_msm_run(struct usb_hcd *hcd)
{
	struct ehci_hcd *ehci  = hcd_to_ehci(hcd);
	struct msmusb_hcd *mhcd = hcd_to_mhcd(hcd);
	int             retval = 0;
	int     	port   = HCS_N_PORTS(ehci->hcs_params);
	u32 __iomem     *reg_ptr;
	u32             hcc_params;
	struct msm_usb_host_platform_data *pdata = mhcd->pdata;

	hcd->uses_new_polling = 1;
	hcd->poll_rh = 0;

	USBH_INFO("%s\n", __func__);
	/* set hostmode */
	reg_ptr = (u32 __iomem *)(((u8 __iomem *)ehci->regs) + USBMODE);
	ehci_writel(ehci, (USBMODE_VBUS | USBMODE_SDIS), reg_ptr);

	/* port configuration - phy, port speed, port power, port enable */
	while (port--)
		ehci_writel(ehci, (PTS_VAL(pdata->phy_info) | PORT_POWER |
				PORT_PE), &ehci->regs->port_status[port]);

	ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
	ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next);

	hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
	if (HCC_64BIT_ADDR(hcc_params))
		ehci_writel(ehci, 0, &ehci->regs->segment);

	ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
	ehci->command |= CMD_RUN;
	ehci_writel(ehci, ehci->command, &ehci->regs->command);
	ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */

	hcd->state = HC_STATE_RUNNING;

	/*Enable appropriate Interrupts*/
	ehci_writel(ehci, INTR_MASK, &ehci->regs->intr_enable);

	return retval;
}

/* Display the ports dedicated to the companion controller */
static ssize_t show_companion(struct device *dev,
                              struct device_attribute *attr,
                              char *buf)
{
    struct ehci_hcd		*ehci;
    int			nports, index, n;
    int			count = PAGE_SIZE;
    char			*ptr = buf;

    ehci = hcd_to_ehci(dev_get_drvdata(dev));
    nports = HCS_N_PORTS(ehci->hcs_params);

    for (index = 0; index < nports; ++index) {
        if (test_bit(index, &ehci->companion_ports)) {
            n = scnprintf(ptr, count, "%d\n", index + 1);
            ptr += n;
            count -= n;
        }
    }
    return ptr - buf;
}

static int ci_ehci_bus_suspend(struct usb_hcd *hcd)
{
	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
	int port;
	u32 tmp;

	int ret = orig_bus_suspend(hcd);

	if (ret)
		return ret;

	port = HCS_N_PORTS(ehci->hcs_params);
	while (port--) {
		u32 __iomem *reg = &ehci->regs->port_status[port];
		u32 portsc = ehci_readl(ehci, reg);

		if (portsc & PORT_CONNECT) {
			/*
			 * For chipidea, the resume signal will be ended
			 * automatically, so for remote wakeup case, the
			 * usbcmd.rs may not be set before the resume has
			 * ended if other resume paths consumes too much
			 * time (~24ms), in that case, the SOF will not
			 * send out within 3ms after resume ends, then the
			 * high speed device will enter full speed mode.
			 */

			tmp = ehci_readl(ehci, &ehci->regs->command);
			tmp |= CMD_RUN;
			ehci_writel(ehci, tmp, &ehci->regs->command);
			/*
			 * It needs a short delay between set RS bit and PHCD.
			 */
			usleep_range(150, 200);
			break;
		}
	}

	return 0;
}

static int ehci_omap_bus_suspend(struct usb_hcd *hcd)
{
	struct usb_bus *bus = hcd_to_bus(hcd);
	int ret;

#ifdef CONFIG_LOGIC_OMAP3530_USB3320_HACK
	struct ehci_hcd_omap *omap = platform_get_drvdata(to_platform_device(
						    hcd->self.controller));
	struct ehci_hcd *ehci = omap->ehci;
	int ports = HCS_N_PORTS (omap->ehci->hcs_params);
	int i;
	
	// Manually suspend the ports HERE.  We want to be able to switch to
	// GPIO lines before it shuts down the controller entirely;
	// Otherwise, it'll wake up the PHY again.
	for(i=0;i<ports;++i)
	{
	    u32 __iomem *status_reg = &omap->ehci->regs->port_status[i];
	    u32 temp = ehci_readl(omap->ehci, status_reg);
	    
	    if((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0)
		continue;

	    ehci_writel(omap->ehci, temp | PORT_SUSPEND, status_reg);
	    set_bit(i, &ehci->suspended_ports);
	}
	
	msleep(1);
	
	usb3320_hack_install();
#endif

	ret = ehci_bus_suspend(hcd);

	ehci_omap_dev_suspend(bus->controller);

	return ret;
}

static int ehci_hub_control (
	struct usb_hcd	*hcd,
	u16		typeReq,
	u16		wValue,
	u16		wIndex,
	char		*buf,
	u16		wLength
) {
	struct ehci_hcd	*ehci = hcd_to_ehci (hcd);
	int		ports = HCS_N_PORTS (ehci->hcs_params);
	u32		temp, status;
	unsigned long	flags;
	int		retval = 0;

	/*
	 * FIXME:  support SetPortFeatures USB_PORT_FEAT_INDICATOR.
	 * HCS_INDICATOR may say we can change LEDs to off/amber/green.
	 * (track current state ourselves) ... blink for diagnostics,
	 * power, "this is the one", etc.  EHCI spec supports this.
	 */

	spin_lock_irqsave (&ehci->lock, flags);
	switch (typeReq) {
	case ClearHubFeature:
		switch (wValue) {
		case C_HUB_LOCAL_POWER:
		case C_HUB_OVER_CURRENT:
			/* no hub-wide feature/status flags */
			break;
		default:
			goto error;
		}
		break;
	case ClearPortFeature:
		if (!wIndex || wIndex > ports)
			goto error;
		wIndex--;
		temp = readl (&ehci->regs->port_status [wIndex]);
		if (temp & PORT_OWNER)
			break;

		switch (wValue) {
		case USB_PORT_FEAT_ENABLE:
			writel (temp & ~PORT_PE,
				&ehci->regs->port_status [wIndex]);
			break;
		case USB_PORT_FEAT_C_ENABLE:
			writel (temp | PORT_PEC,
				&ehci->regs->port_status [wIndex]);
			break;
		case USB_PORT_FEAT_SUSPEND:
		case USB_PORT_FEAT_C_SUSPEND:
			/* ? */
			break;
		case USB_PORT_FEAT_POWER:
			if (HCS_PPC (ehci->hcs_params))
				writel (temp & ~PORT_POWER,
					&ehci->regs->port_status [wIndex]);
			break;
		case USB_PORT_FEAT_C_CONNECTION:
			writel (temp | PORT_CSC,
				&ehci->regs->port_status [wIndex]);
			break;
		case USB_PORT_FEAT_C_OVER_CURRENT:
			writel (temp | PORT_OCC,
				&ehci->regs->port_status [wIndex]);
			break;
		case USB_PORT_FEAT_C_RESET:
			/* GetPortStatus clears reset */
			break;
		default:
			goto error;
		}
		readl (&ehci->regs->command);	/* unblock posted write */
		break;
	case GetHubDescriptor:
		ehci_hub_descriptor (ehci, (struct usb_hub_descriptor *)
			buf);
		break;
	case GetHubStatus:
		/* no hub-wide feature/status flags */
		memset (buf, 0, 4);
		//cpu_to_le32s ((u32 *) buf);
		break;
	case GetPortStatus:
		if (!wIndex || wIndex > ports)
			goto error;
		wIndex--;
		status = 0;
		temp = readl (&ehci->regs->port_status [wIndex]);

		// wPortChange bits
		if (temp & PORT_CSC)
			status |= 1 << USB_PORT_FEAT_C_CONNECTION;
		if (temp & PORT_PEC)
			status |= 1 << USB_PORT_FEAT_C_ENABLE;
		// USB_PORT_FEAT_C_SUSPEND
		if (temp & PORT_OCC)
			status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;

//.........这里部分代码省略.........

//.........这里部分代码省略.........
				u8 tmp;
				ehci_info(ehci, "applying AMD SB600/SB700 USB "
					"freeze workaround\n");
				pci_read_config_byte(pdev, 0x53, &tmp);
				pci_write_config_byte(pdev, 0x53, tmp | (1<<3));
			}
			pci_dev_put(p_smbus);
		}
		break;
	case PCI_VENDOR_ID_NETMOS:
		/* MosChip frame-index-register bug */
		ehci_info(ehci, "applying MosChip frame-index workaround\n");
		ehci->frame_index_bug = 1;
		break;
	}

	/* optional debug port, normally in the first BAR */
	temp = pci_find_capability(pdev, 0x0a);
	if (temp) {
		pci_read_config_dword(pdev, temp, &temp);
		temp >>= 16;
		if ((temp & (3 << 13)) == (1 << 13)) {
			temp &= 0x1fff;
			ehci->debug = ehci_to_hcd(ehci)->regs + temp;
			temp = ehci_readl(ehci, &ehci->debug->control);
			ehci_info(ehci, "debug port %d%s\n",
				HCS_DEBUG_PORT(ehci->hcs_params),
				(temp & DBGP_ENABLED)
					? " IN USE"
					: "");
			if (!(temp & DBGP_ENABLED))
				ehci->debug = NULL;
		}
	}

	ehci_reset(ehci);

	/* at least the Genesys GL880S needs fixup here */
	temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
	temp &= 0x0f;
	if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) {
		ehci_dbg(ehci, "bogus port configuration: "
			"cc=%d x pcc=%d < ports=%d\n",
			HCS_N_CC(ehci->hcs_params),
			HCS_N_PCC(ehci->hcs_params),
			HCS_N_PORTS(ehci->hcs_params));

		switch (pdev->vendor) {
		case 0x17a0:		/* GENESYS */
			/* GL880S: should be PORTS=2 */
			temp |= (ehci->hcs_params & ~0xf);
			ehci->hcs_params = temp;
			break;
		case PCI_VENDOR_ID_NVIDIA:
			/* NF4: should be PCC=10 */
			break;
		}
	}

	/* Serial Bus Release Number is at PCI 0x60 offset */
	pci_read_config_byte(pdev, 0x60, &ehci->sbrn);
	if (pdev->vendor == PCI_VENDOR_ID_STMICRO
	    && pdev->device == PCI_DEVICE_ID_STMICRO_USB_HOST)
		ehci->sbrn = 0x20; /* ConneXT has no sbrn register */

	/* Keep this around for a while just in case some EHCI
	 * implementation uses legacy PCI PM support.  This test
	 * can be removed on 17 Dec 2009 if the dev_warn() hasn't
	 * been triggered by then.
	 */
	if (!device_can_wakeup(&pdev->dev)) {
		u16	port_wake;

		pci_read_config_word(pdev, 0x62, &port_wake);
		if (port_wake & 0x0001) {
			dev_warn(&pdev->dev, "Enabling legacy PCI PM\n");
			device_set_wakeup_capable(&pdev->dev, 1);
		}
	}

#ifdef	CONFIG_USB_SUSPEND
	/* REVISIT: the controller works fine for wakeup iff the root hub
	 * itself is "globally" suspended, but usbcore currently doesn't
	 * understand such things.
	 *
	 * System suspend currently expects to be able to suspend the entire
	 * device tree, device-at-a-time.  If we failed selective suspend
	 * reports, system suspend would fail; so the root hub code must claim
	 * success.  That's lying to usbcore, and it matters for runtime
	 * PM scenarios with selective suspend and remote wakeup...
	 */
	if (ehci->no_selective_suspend && device_can_wakeup(&pdev->dev))
		ehci_warn(ehci, "selective suspend/wakeup unavailable\n");
#endif

	ehci_port_power(ehci, 1);
	retval = ehci_pci_reinit(ehci, pdev);
done:
	return retval;
}