• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号

C++ HOSTAPD_DEBUG函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中HOSTAPD_DEBUG函数的典型用法代码示例。如果您正苦于以下问题:C++ HOSTAPD_DEBUG函数的具体用法?C++ HOSTAPD_DEBUG怎么用?C++ HOSTAPD_DEBUG使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了HOSTAPD_DEBUG函数的14个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: handle_tx_callback

static void handle_tx_callback(hostapd *hapd, char *buf, size_t len, int ok)
{
	struct ieee80211_hdr *hdr;
	u16 fc, type, stype;
	hdr = (struct ieee80211_hdr *) buf;
	fc = le_to_host16(hdr->frame_control);

	type = WLAN_FC_GET_TYPE(fc);
	stype = WLAN_FC_GET_STYPE(fc);

	switch (type) {
	case WLAN_FC_TYPE_MGMT:
		HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL,
			      "MGMT (TX callback) %s\n", ok ? "ACK" : "fail");
		ieee802_11_mgmt_cb(hapd, buf, len, stype, ok);
		break;
	case WLAN_FC_TYPE_CTRL:
		HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL,
			      "CTRL (TX callback) %s\n", ok ? "ACK" : "fail");
		break;
	case WLAN_FC_TYPE_DATA:
		HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL,
			      "DATA (TX callback) %s\n", ok ? "ACK" : "fail");
		/* TODO: could replace TXExc counter hack with kernel driver
		 * in data polling for inactivity check with the new TX
		 * callback.. */
		/* handle_data_cb(hapd, buf, len, stype, ok); */
		break;
	default:
		printf("unknown TX callback frame type %d\n", type);
		break;
	}
}
开发者ID:BackupTheBerlios,项目名称:wl530g-svn,代码行数:33,代码来源:receive.c


示例2: rsn_preauth_receive

static void rsn_preauth_receive(void *ctx, const u8 *src_addr,
				const u8 *buf, size_t len)
{
	struct rsn_preauth_interface *piface = ctx;
	struct hostapd_data *hapd = piface->hapd;
	struct ieee802_1x_hdr *hdr;
	struct sta_info *sta;
	struct l2_ethhdr *ethhdr;

	HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL, "RSN: receive pre-auth packet "
		      "from interface '%s'\n", piface->ifname);
	if (len < sizeof(*ethhdr) + sizeof(*hdr)) {
		HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL, "RSN: too short pre-auth "
			      "packet (len=%lu)\n", (unsigned long) len);
		return;
	}

	ethhdr = (struct l2_ethhdr *) buf;
	hdr = (struct ieee802_1x_hdr *) (ethhdr + 1);

	if (memcmp(ethhdr->h_dest, hapd->own_addr, ETH_ALEN) != 0) {
		HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL, "RSN: pre-auth for "
			      "foreign address " MACSTR "\n",
			      MAC2STR(ethhdr->h_dest));
		return;
	}

	sta = ap_get_sta(hapd, ethhdr->h_source);
	if (sta && (sta->flags & WLAN_STA_ASSOC)) {
		HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL, "RSN: pre-auth for "
			      "already association STA " MACSTR "\n",
			      MAC2STR(sta->addr));
		return;
	}
	if (!sta && hdr->type == IEEE802_1X_TYPE_EAPOL_START) {
		sta = ap_sta_add(hapd, ethhdr->h_source);
		if (sta == NULL)
			return;
		sta->flags = WLAN_STA_PREAUTH;

		ieee802_1x_new_station(hapd, sta);
		if (sta->eapol_sm == NULL) {
			ap_free_sta(hapd, sta);
			sta = NULL;
		} else {
			sta->eapol_sm->radius_identifier = -1;
			sta->eapol_sm->portValid = TRUE;
			sta->eapol_sm->flags |= EAPOL_SM_PREAUTH;
		}
	}
	if (sta == NULL)
		return;
	sta->preauth_iface = piface;
	ieee802_1x_receive(hapd, ethhdr->h_source, (u8 *) (ethhdr + 1),
			   len - sizeof(*ethhdr));
}
开发者ID:KHATEEBNSIT,项目名称:AP,代码行数:56,代码来源:preauth.c


示例3: rsn_preauth_send

void rsn_preauth_send(struct hostapd_data *hapd, struct sta_info *sta,
		      u8 *buf, size_t len)
{
	struct rsn_preauth_interface *piface;
	struct l2_ethhdr *ethhdr;

	piface = hapd->preauth_iface;
	while (piface) {
		if (piface == sta->preauth_iface)
			break;
		piface = piface->next;
	}

	if (piface == NULL) {
		HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL, "RSN: Could not find "
			      "pre-authentication interface for " MACSTR "\n",
			      MAC2STR(sta->addr));
		return;
	}

	ethhdr = malloc(sizeof(*ethhdr) + len);
	if (ethhdr == NULL)
		return;

	memcpy(ethhdr->h_dest, sta->addr, ETH_ALEN);
	memcpy(ethhdr->h_source, hapd->own_addr, ETH_ALEN);
	ethhdr->h_proto = htons(ETH_P_PREAUTH);
	memcpy(ethhdr + 1, buf, len);

	if (l2_packet_send(piface->l2, sta->addr, ETH_P_PREAUTH, (u8 *) ethhdr,
			   sizeof(*ethhdr) + len) < 0) {
		printf("Failed to send preauth packet using l2_packet_send\n");
	}
	free(ethhdr);
}
开发者ID:KHATEEBNSIT,项目名称:AP,代码行数:35,代码来源:preauth.c


示例4: rsn_preauth_iface_add

static int rsn_preauth_iface_add(struct hostapd_data *hapd, const char *ifname)
{
	struct rsn_preauth_interface *piface;

	HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL, "RSN pre-auth interface '%s'\n",
		      ifname);

	piface = wpa_zalloc(sizeof(*piface));
	if (piface == NULL)
		return -1;
	piface->hapd = hapd;

	piface->ifname = strdup(ifname);
	if (piface->ifname == NULL) {
		goto fail1;
	}

	piface->l2 = l2_packet_init(piface->ifname, NULL, ETH_P_PREAUTH,
				    rsn_preauth_receive, piface, 1);
	if (piface->l2 == NULL) {
		printf("Failed to open register layer 2 access to "
		       "ETH_P_PREAUTH\n");
		goto fail2;
	}

	piface->next = hapd->preauth_iface;
	hapd->preauth_iface = piface;
	return 0;

fail2:
	free(piface->ifname);
fail1:
	free(piface);
	return -1;
}
开发者ID:KHATEEBNSIT,项目名称:AP,代码行数:35,代码来源:preauth.c


示例5: hostapd_acl_expire_queries

static void hostapd_acl_expire_queries(struct hostapd_data *hapd, time_t now)
{
	struct hostapd_acl_query_data *prev, *entry, *tmp;

	prev = NULL;
	entry = hapd->acl_queries;

	while (entry) {
		if (now - entry->timestamp > RADIUS_ACL_TIMEOUT) {
			HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL,
				      "ACL query for " MACSTR
				      " has expired.\n", MAC2STR(entry->addr));
			if (prev)
				prev->next = entry->next;
			else
				hapd->acl_queries = entry->next;

			tmp = entry;
			entry = entry->next;
			hostapd_acl_query_free(tmp);
			continue;
		}

		prev = entry;
		entry = entry->next;
	}
}
开发者ID:jameshilliard,项目名称:actiontec_opensrc_mi424wr-rev-e-f_fw-20-10-7-5,代码行数:27,代码来源:ieee802_11_auth.c


示例6: radius_client_retransmit

static int radius_client_retransmit(hostapd *hapd,
				    struct radius_msg_list *entry, time_t now)
{
	int s;

	if (entry->msg_type == RADIUS_ACCT)
		s = hapd->radius->acct_serv_sock;
	else
		s = hapd->radius->auth_serv_sock;

	/* retransmit; remove entry if too many attempts */
	entry->attempts++;
	HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL, "Resending RADIUS message (id=%d)"
		      "\n", entry->msg->hdr->identifier);

	if (send(s, entry->msg->buf, entry->msg->buf_used, 0) < 0)
		perror("send[RADIUS]");

	entry->next_try = now + entry->next_wait;
	entry->next_wait *= 2;
	if (entry->next_wait > RADIUS_CLIENT_MAX_WAIT)
		entry->next_wait = RADIUS_CLIENT_MAX_WAIT;
	if (entry->attempts >= RADIUS_CLIENT_MAX_RETRIES) {
		printf("Removing un-ACKed RADIUS message due to too many "
		       "failed retransmit attempts\n");
		return 1;
	}

	return 0;
}
开发者ID:BackupTheBerlios,项目名称:wl530g-svn,代码行数:30,代码来源:radius_client.c


示例7: hostapd_acl_expire_cache

static void hostapd_acl_expire_cache(hostapd *hapd, time_t now)
{
	struct hostapd_cached_radius_acl *prev, *entry, *tmp;

	prev = NULL;
	entry = hapd->acl_cache;

	while (entry) {
		if (now - entry->timestamp > RADIUS_ACL_TIMEOUT) {
			HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL,
				      "Cached ACL entry for " MACSTR
				      " has expired.\n", MAC2STR(entry->addr));
			if (prev)
				prev->next = entry->next;
			else
				hapd->acl_cache = entry->next;

			tmp = entry;
			entry = entry->next;
			free(tmp);
			continue;
		}

		prev = entry;
		entry = entry->next;
	}
}
开发者ID:OPSF,项目名称:uClinux,代码行数:27,代码来源:ieee802_11_auth.c


示例8: reload_hw_mode_done

/**
 * reload_hw_mode_done - Callback for after the HW mode is setup
 * @hapd_iface: Pointer to interface data.
 * @status: Status of the HW mode setup.
 */
static void reload_hw_mode_done(struct hostapd_iface *hapd_iface, int status)
{
	struct hostapd_data *hapd = hapd_iface->bss[0];
	struct hostapd_config_change *change = hapd_iface->change;
	struct hostapd_config *newconf = change->newconf;
	hostapd_iface_cb cb;
	int freq;

	if (status) {
		printf("Failed to select hw_mode.\n");

		cb = hapd_iface->reload_iface_cb;
		hapd_iface->reload_iface_cb = NULL;
		cb(hapd_iface, -1);

		return;
	}

	freq = hostapd_hw_get_freq(hapd, newconf->channel);
	HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL,
		      "Mode: %s  Channel: %d  Frequency: %d MHz\n",
		      hostapd_hw_mode_txt(newconf->hw_mode),
		      newconf->channel, freq);

	if (hostapd_set_freq(hapd, newconf->hw_mode, freq)) {
		printf("Could not set channel %d (%d MHz) for kernel "
		       "driver\n", newconf->channel, freq);
	}

	change->beacon_changed++;

	reload_iface2(hapd_iface);
}
开发者ID:jameshilliard,项目名称:actiontec_opensrc_mi424wr-rev-e-f_fw-20-10-7-5,代码行数:38,代码来源:reconfig.c


示例9: ap_sta_add

struct sta_info * ap_sta_add(struct hostapd_data *hapd, const u8 *addr)
{
	struct sta_info *sta;

	sta = ap_get_sta(hapd, addr);
	if (sta)
		return sta;

	HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL, "  New STA\n");
	if (hapd->num_sta >= hapd->conf->max_num_sta) {
		/* FIX: might try to remove some old STAs first? */
		printf("  no more room for new STAs (%d/%d)\n",
		       hapd->num_sta, hapd->conf->max_num_sta);
		return NULL;
	}

	sta = wpa_zalloc(sizeof(struct sta_info));
	if (sta == NULL) {
		printf("  malloc failed\n");
		return NULL;
	}
	sta->acct_interim_interval = hapd->conf->radius->acct_interim_interval;

	/* initialize STA info data */
	eloop_register_timeout(hapd->conf->ap_max_inactivity, 0,
			       ap_handle_timer, hapd, sta);
	memcpy(sta->addr, addr, ETH_ALEN);
	sta->next = hapd->sta_list;
	hapd->sta_list = sta;
	hapd->num_sta++;
	ap_sta_hash_add(hapd, sta);
	sta->ssid = &hapd->conf->ssid;

	return sta;
}
开发者ID:KHATEEBNSIT,项目名称:AP,代码行数:35,代码来源:sta_info.c


示例10: hostapd_init_sockets

int hostapd_init_sockets(struct hostap_driver_data *drv)
{
	struct hostapd_data *hapd = drv->hapd;
	struct ifreq ifr;
	struct sockaddr_ll addr;

	drv->sock = socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
	if (drv->sock < 0) {
		perror("socket[PF_PACKET,SOCK_RAW]");
		return -1;
	}

	if (eloop_register_read_sock(drv->sock, handle_read, drv->hapd, NULL))
	{
		printf("Could not register read socket\n");
		return -1;
	}

        memset(&ifr, 0, sizeof(ifr));
        snprintf(ifr.ifr_name, sizeof(ifr.ifr_name), "%sap", drv->iface);
        if (ioctl(drv->sock, SIOCGIFINDEX, &ifr) != 0) {
		perror("ioctl(SIOCGIFINDEX)");
		return -1;
        }

	if (hostapd_set_iface_flags(drv, 1)) {
		return -1;
	}

	memset(&addr, 0, sizeof(addr));
	addr.sll_family = AF_PACKET;
	addr.sll_ifindex = ifr.ifr_ifindex;
	HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL,
		      "Opening raw packet socket for ifindex %d\n",
		      addr.sll_ifindex);

	if (bind(drv->sock, (struct sockaddr *) &addr, sizeof(addr)) < 0) {
		perror("bind");
		return -1;
	}

        memset(&ifr, 0, sizeof(ifr));
        snprintf(ifr.ifr_name, sizeof(ifr.ifr_name), "%s", drv->iface);
        if (ioctl(drv->sock, SIOCGIFHWADDR, &ifr) != 0) {
		perror("ioctl(SIOCGIFHWADDR)");
		return -1;
        }

	if (ifr.ifr_hwaddr.sa_family != ARPHRD_ETHER) {
		printf("Invalid HW-addr family 0x%04x\n",
		       ifr.ifr_hwaddr.sa_family);
		return -1;
	}
	memcpy(drv->hapd->own_addr, ifr.ifr_hwaddr.sa_data, ETH_ALEN);

	return 0;
}
开发者ID:gittestusername,项目名称:uClinux,代码行数:57,代码来源:receive.c


示例11: handle_tx_callback

static void handle_tx_callback(hostapd *hapd, char *buf, size_t len, int ok)
{
	struct ieee80211_hdr *hdr;
	u16 fc, type, stype;
	struct sta_info *sta;

	hdr = (struct ieee80211_hdr *) buf;
	fc = le_to_host16(hdr->frame_control);

	type = WLAN_FC_GET_TYPE(fc);
	stype = WLAN_FC_GET_STYPE(fc);

	switch (type) {
	case WLAN_FC_TYPE_MGMT:
		HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL,
			      "MGMT (TX callback) %s\n", ok ? "ACK" : "fail");
		ieee802_11_mgmt_cb(hapd, buf, len, stype, ok);
		break;
	case WLAN_FC_TYPE_CTRL:
		HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL,
			      "CTRL (TX callback) %s\n", ok ? "ACK" : "fail");
		break;
	case WLAN_FC_TYPE_DATA:
		HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL,
			      "DATA (TX callback) %s\n", ok ? "ACK" : "fail");
		sta = ap_get_sta(hapd, hdr->addr1);
		if (sta && sta->flags & WLAN_STA_PENDING_POLL) {
			HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL, "STA " MACSTR
				      " %s pending activity poll\n",
				      MAC2STR(sta->addr),
				      ok ? "ACKed" : "did not ACK");
			if (ok)
				sta->flags &= ~WLAN_STA_PENDING_POLL;
		}
		if (sta)
			ieee802_1x_tx_status(hapd, sta, buf, len, ok);
		break;
	default:
		printf("unknown TX callback frame type %d\n", type);
		break;
	}
}
开发者ID:gittestusername,项目名称:uClinux,代码行数:42,代码来源:receive.c


示例12: ap_sta_remove

static int ap_sta_remove(struct hostapd_data *hapd, struct sta_info *sta)
{
	ieee802_1x_notify_port_enabled(sta->eapol_sm, 0);

	HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL, "Removing STA " MACSTR
		      " from kernel driver\n", MAC2STR(sta->addr));
	if (hostapd_sta_remove(hapd, sta->addr) &&
	    sta->flags & WLAN_STA_ASSOC) {
		printf("Could not remove station " MACSTR " from kernel "
		       "driver.\n", MAC2STR(sta->addr));
		return -1;
	}
	return 0;
}
开发者ID:KHATEEBNSIT,项目名称:AP,代码行数:14,代码来源:sta_info.c


示例13: ap_list_timer

static void ap_list_timer(void *eloop_ctx, void *timeout_ctx)
{
	struct hostapd_iface *iface = eloop_ctx;
	time_t now;
	struct ap_info *ap;

	eloop_register_timeout(10, 0, ap_list_timer, iface, NULL);

	if (!iface->ap_list)
		return;

	time(&now);

	/* FIX: it looks like jkm-Purina ended up in busy loop in this
	 * function. Apparently, something can still cause a loop in the AP
	 * list.. */

	while (iface->ap_list) {
		ap = iface->ap_list->prev;
		if (ap->last_beacon + iface->conf->ap_table_expiration_time >=
		    now)
			break;

		if (iface->conf->passive_scan_interval > 0)
			ap_list_expired_ap(iface, ap);
		ap_free_ap(iface, ap);
	}

	if (iface->olbc) {
		int olbc = 0;
		ap = iface->ap_list;
		while (ap) {
			if (ap_list_beacon_olbc(iface, ap)) {
				olbc = 1;
				break;
			}
			ap = ap->next;
		}
		if (!olbc) {
			struct hostapd_data *hapd = iface->bss[0];
			HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL,
				      "OLBC not detected anymore\n");
			iface->olbc = 0;
			ieee802_11_set_beacons(hapd->iface);
		}
	}
}
开发者ID:10imaging,项目名称:scancode-toolkit,代码行数:47,代码来源:ap_list.c


示例14: ap_sta_deauthenticate

void ap_sta_deauthenticate(struct hostapd_data *hapd, struct sta_info *sta,
			   u16 reason)
{
	HOSTAPD_DEBUG(HOSTAPD_DEBUG_MINIMAL, "%s: deauthenticate STA " MACSTR
		      "\n", hapd->conf->iface, MAC2STR(sta->addr));
	sta->flags &= ~(WLAN_STA_AUTH | WLAN_STA_ASSOC);
	if (!ap_sta_in_other_bss(hapd, sta, WLAN_STA_ASSOC))
		ap_sta_remove(hapd, sta);
	sta->timeout_next = STA_REMOVE;
	eloop_cancel_timeout(ap_handle_timer, hapd, sta);
	eloop_register_timeout(AP_MAX_INACTIVITY_AFTER_DEAUTH, 0,
			       ap_handle_timer, hapd, sta);
	accounting_sta_stop(hapd, sta);
	ieee802_1x_free_station(sta);

	mlme_deauthenticate_indication(hapd, sta, reason);
}
开发者ID:KHATEEBNSIT,项目名称:AP,代码行数:17,代码来源:sta_info.c



注:本文中的HOSTAPD_DEBUG函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ HOST_c2l函数代码示例发布时间:2022-05-30
下一篇:
C++ HOOK2MANIP函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap