C++ HOWTO函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中HOWTO函数的典型用法代码示例。如果您正苦于以下问题：C++ HOWTO函数的具体用法？C++ HOWTO怎么用？C++ HOWTO使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了HOWTO函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: HOWTO

     asymbol *symbol,
     PTR data,
     asection *input_section,
     bfd *output_bfd,
     char **error_message));

static reloc_howto_type elf_d30v_howto_table[] =
{
  /* This reloc does nothing.  */
  HOWTO (R_D30V_NONE,		/* type */
	 0,			/* rightshift */
	 2,			/* size (0 = byte, 1 = short, 2 = long) */
	 32,			/* bitsize */
	 FALSE,			/* pc_relative */
	 0,			/* bitpos */
	 complain_overflow_bitfield, /* complain_on_overflow */
	 bfd_elf_generic_reloc,	/* special_function */
	 "R_D30V_NONE",		/* name */
	 FALSE,			/* partial_inplace */
	 0,			/* src_mask */
	 0,			/* dst_mask */
	 FALSE),		/* pcrel_offset */

  /* A 6 bit absolute relocation */
  HOWTO (R_D30V_6,		/* type */
	 0,			/* rightshift */
	 2,			/* size (0 = byte, 1 = short, 2 = long) */
	 6,			/* bitsize */
	 FALSE,			/* pc_relative */
	 0,			/* bitpos */
	 complain_overflow_bitfield, /* complain_on_overflow */

开发者ID:Rukanth，项目名称:dd-wrt，代码行数:31，代码来源:elf32-d30v.c

示例2: sections

/* The Motorola 68HC11 microcontroller only addresses 64Kb but we also
   support a memory bank switching mechanism similar to 68HC12.
   We must handle 8 and 16-bit relocations.  The 32-bit relocation
   are used for debugging sections (DWARF2) to represent a virtual
   address.
   The 3-bit and 16-bit PC rel relocation is only used by 68HC12.  */
static reloc_howto_type elf_m68hc11_howto_table[] = {
  /* This reloc does nothing.  */
  HOWTO (R_M68HC11_NONE,	/* type */
	 0,			/* rightshift */
	 2,			/* size (0 = byte, 1 = short, 2 = long) */
	 32,			/* bitsize */
	 FALSE,			/* pc_relative */
	 0,			/* bitpos */
	 complain_overflow_dont,/* complain_on_overflow */
	 bfd_elf_generic_reloc,	/* special_function */
	 "R_M68HC11_NONE",	/* name */
	 FALSE,			/* partial_inplace */
	 0,			/* src_mask */
	 0,			/* dst_mask */
	 FALSE),		/* pcrel_offset */

  /* A 8 bit absolute relocation */
  HOWTO (R_M68HC11_8,		/* type */
	 0,			/* rightshift */
	 0,			/* size (0 = byte, 1 = short, 2 = long) */
	 8,			/* bitsize */
	 FALSE,			/* pc_relative */
	 0,			/* bitpos */
	 complain_overflow_bitfield,	/* complain_on_overflow */

开发者ID:Freeaqingme，项目名称:OpenBSD，代码行数:30，代码来源:elf32-m68hc11.c

示例3: HOWTO

#include "libbfd.h"
#include "obstack.h"
#include "coff/we32k.h"
#include "coff/internal.h"
#include "libcoff.h"


static reloc_howto_type howto_table[] = 
{
    {0},
    {1},
    {2},
    {3},
    {4},
    {5},
  HOWTO(R_DIR32,	       0,  2, 	32, false, 0,complain_overflow_bitfield, 0, "dir32",	true, 0xffffffff,0xffffffff, false),
    {7},
    {010},
    {011},
    {012},
    {013},
    {014},
    {015},
    {016},
  HOWTO(R_RELBYTE,	       0,  0,  	8,  false, 0, complain_overflow_bitfield, 0, "8",	true, 0x000000ff,0x000000ff, false),
  HOWTO(R_RELWORD,	       0,  1, 	16, false, 0, complain_overflow_bitfield, 0, "16",	true, 0x0000ffff,0x0000ffff, false),
  HOWTO(R_RELLONG,	       0,  2, 	32, false, 0, complain_overflow_bitfield, 0, "32",	true, 0xffffffff,0xffffffff, false),
  HOWTO(R_PCRBYTE,	       0,  0, 	8,  true,  0, complain_overflow_signed, 0, "DISP8",    true, 0x000000ff,0x000000ff, false),
  HOWTO(R_PCRWORD,	       0,  1, 	16, true,  0, complain_overflow_signed, 0, "DISP16",   true, 0x0000ffff,0x0000ffff, false),
  HOWTO(R_PCRLONG,	       0,  2, 	32, true,  0, complain_overflow_signed, 0, "DISP32",   true, 0xffffffff,0xffffffff, false),
};

开发者ID:metacore，项目名称:spin，代码行数:31，代码来源:coff-we32k.c

示例4: HOWTO

  R_SPARC_WDISP30,	R_SPARC_WDISP22,
  R_SPARC_HI22,		R_SPARC_22,
  R_SPARC_13,		R_SPARC_LO10,
  R_SPARC_GOT10,	R_SPARC_GOT13,		R_SPARC_GOT22,
  R_SPARC_PC10,		R_SPARC_PC22,
  R_SPARC_WPLT30,
  R_SPARC_COPY,
  R_SPARC_GLOB_DAT,	R_SPARC_JMP_SLOT,
  R_SPARC_RELATIVE,
  R_SPARC_UA32,
  R_SPARC_max
};

static reloc_howto_type nlm32_sparc_howto_table[] =
{
  HOWTO (R_SPARC_NONE,    0,0, 0,FALSE,0,complain_overflow_dont,    0,"R_SPARC_NONE",    FALSE,0,0x00000000,TRUE),
  HOWTO (R_SPARC_8,       0,0, 8,FALSE,0,complain_overflow_bitfield,0,"R_SPARC_8",       FALSE,0,0x000000ff,TRUE),
  HOWTO (R_SPARC_16,      0,1,16,FALSE,0,complain_overflow_bitfield,0,"R_SPARC_16",      FALSE,0,0x0000ffff,TRUE),
  HOWTO (R_SPARC_32,      0,2,32,FALSE,0,complain_overflow_bitfield,0,"R_SPARC_32",      FALSE,0,0xffffffff,TRUE),
  HOWTO (R_SPARC_DISP8,   0,0, 8,TRUE, 0,complain_overflow_signed,  0,"R_SPARC_DISP8",   FALSE,0,0x000000ff,TRUE),
  HOWTO (R_SPARC_DISP16,  0,1,16,TRUE, 0,complain_overflow_signed,  0,"R_SPARC_DISP16",  FALSE,0,0x0000ffff,TRUE),
  HOWTO (R_SPARC_DISP32,  0,2,32,TRUE, 0,complain_overflow_signed,  0,"R_SPARC_DISP32",  FALSE,0,0x00ffffff,TRUE),
  HOWTO (R_SPARC_WDISP30, 2,2,30,TRUE, 0,complain_overflow_signed,  0,"R_SPARC_WDISP30", FALSE,0,0x3fffffff,TRUE),
  HOWTO (R_SPARC_WDISP22, 2,2,22,TRUE, 0,complain_overflow_signed,  0,"R_SPARC_WDISP22", FALSE,0,0x003fffff,TRUE),
  HOWTO (R_SPARC_HI22,   10,2,22,FALSE,0,complain_overflow_dont,    0,"R_SPARC_HI22",    FALSE,0,0x003fffff,TRUE),
  HOWTO (R_SPARC_22,      0,2,22,FALSE,0,complain_overflow_bitfield,0,"R_SPARC_22",      FALSE,0,0x003fffff,TRUE),
  HOWTO (R_SPARC_13,      0,2,13,FALSE,0,complain_overflow_bitfield,0,"R_SPARC_13",      FALSE,0,0x00001fff,TRUE),
  HOWTO (R_SPARC_LO10,    0,2,10,FALSE,0,complain_overflow_dont,    0,"R_SPARC_LO10",    FALSE,0,0x000003ff,TRUE),
  HOWTO (R_SPARC_GOT10,   0,2,10,FALSE,0,complain_overflow_bitfield,0,"R_SPARC_GOT10",   FALSE,0,0x000003ff,TRUE),
  HOWTO (R_SPARC_GOT13,   0,2,13,FALSE,0,complain_overflow_bitfield,0,"R_SPARC_GOT13",   FALSE,0,0x00001fff,TRUE),
  HOWTO (R_SPARC_GOT22,  10,2,22,FALSE,0,complain_overflow_bitfield,0,"R_SPARC_GOT22",   FALSE,0,0x003fffff,TRUE),

开发者ID:embecosm，项目名称:binutils-gdb，代码行数:31，代码来源:nlm32-sparc.c

示例5: HOWTO

#include "libbfd.h"
#include "elf-bfd.h"
#include "elf/moxie.h"

/* Forward declarations.  */

static reloc_howto_type moxie_elf_howto_table [] =
{
  /* This reloc does nothing.  */
  HOWTO (R_MOXIE_NONE,		/* type */
	 0,			/* rightshift */
	 3,			/* size (0 = byte, 1 = short, 2 = long) */
	 0,			/* bitsize */
	 FALSE,			/* pc_relative */
	 0,			/* bitpos */
	 complain_overflow_dont, /* complain_on_overflow */
	 bfd_elf_generic_reloc,	/* special_function */
	 "R_MOXIE_NONE",		/* name */
	 FALSE,			/* partial_inplace */
	 0,			/* src_mask */
	 0,			/* dst_mask */
	 FALSE),		/* pcrel_offset */

  /* A 32 bit absolute relocation.  */
  HOWTO (R_MOXIE_32,		/* type */
	 0,			/* rightshift */
	 2,			/* size (0 = byte, 1 = short, 2 = long) */
	 32,			/* bitsize */
	 FALSE,			/* pc_relative */
	 0,			/* bitpos */
	 complain_overflow_bitfield, /* complain_on_overflow */

开发者ID:freebsd-riscv，项目名称:riscv-binutils-gdb，代码行数:31，代码来源:elf32-moxie.c

示例6: HOWTO

#include "elf-bfd.h"
#include "elf/eco32.h"

/*
* see bfd-in2.h line ~ 2246
* docu is there
*/
static reloc_howto_type eco32_elf_howto_table[] =
{
HOWTO (R_ECO32_NONE, /* type */
	0, /* rightshift */
	0, /* size (0 = byte, 1 = short, 2 = long) */
	0, /* bitsize */
	FALSE, /* pc_relative */
	0, /* bitpos */
	complain_overflow_dont, /* complain_on_overflow */
	bfd_elf_generic_reloc, /* special_function */
	"R_ECO32_NONE", /* name */
	FALSE, /* partial_inplace */
	0, /* src_mask */
	0, /* dst_mask */
	FALSE), /* pcrel_offset */
	
/* write full 32 bit word with value => full word change */
HOWTO (R_ECO32_W32,	/* type */
	0,	/* rightshift */
	2,	/* size (0 = byte, 1 = short, 2 = long) */
	32,	/* bitsize */
	FALSE,	/* pc_relative */
	0,	/* bitpos */
	complain_overflow_unsigned, /* complain_on_overflow */

开发者ID:skristiansson，项目名称:eco32-binutils，代码行数:31，代码来源:elf32-eco32.c

示例7: fr30_elf_i20_reloc

fr30_elf_i20_reloc (bfd *, arelent *, asymbol *, void * data,
		    asection *, bfd *, char **error_message);
static bfd_reloc_status_type
fr30_elf_i32_reloc (bfd *, arelent *, asymbol *, void *,
		    asection *, bfd *, char **);

static reloc_howto_type fr30_elf_howto_table [] =
{
  /* This reloc does nothing.  */
  HOWTO (R_FR30_NONE,		/* type */
	 0,			/* rightshift */
	 2,			/* size (0 = byte, 1 = short, 2 = long) */
	 32,			/* bitsize */
	 FALSE,			/* pc_relative */
	 0,			/* bitpos */
	 complain_overflow_bitfield, /* complain_on_overflow */
	 bfd_elf_generic_reloc,	/* special_function */
	 "R_FR30_NONE",		/* name */
	 FALSE,			/* partial_inplace */
	 0,			/* src_mask */
	 0,			/* dst_mask */
	 FALSE),		/* pcrel_offset */

  /* An 8 bit absolute relocation.  */
  HOWTO (R_FR30_8,		/* type */
	 0,			/* rightshift */
	 1,			/* size (0 = byte, 1 = short, 2 = long) */
	 8,			/* bitsize */
	 FALSE,			/* pc_relative */
	 4,			/* bitpos */
	 complain_overflow_bitfield, /* complain_on_overflow */

开发者ID:CromFr，项目名称:gdb，代码行数:31，代码来源:elf32-fr30.c

示例8: HOWTO

#include "ecoffswap.h"

/* How to process the various relocs types.  */

static reloc_howto_type mips_howto_table[] =
{
  /* Reloc type 0 is ignored.  The reloc reading code ensures that
     this is a reference to the .abs section, which will cause
     bfd_perform_relocation to do nothing.  */
  HOWTO (MIPS_R_IGNORE,	/* type */
	 0,			/* rightshift */
	 0,			/* size (0 = byte, 1 = short, 2 = long) */
	 8,			/* bitsize */
	 FALSE,			/* pc_relative */
	 0,			/* bitpos */
	 complain_overflow_dont, /* complain_on_overflow */
	 0,			/* special_function */
	 "IGNORE",		/* name */
	 FALSE,			/* partial_inplace */
	 0,			/* src_mask */
	 0,			/* dst_mask */
	 FALSE),		/* pcrel_offset */

  /* A 16 bit reference to a symbol, normally from a data section.  */
  HOWTO (MIPS_R_REFHALF,	/* type */
	 0,			/* rightshift */
	 1,			/* size (0 = byte, 1 = short, 2 = long) */
	 16,			/* bitsize */
	 FALSE,			/* pc_relative */
	 0,			/* bitpos */
	 complain_overflow_bitfield, /* complain_on_overflow */

开发者ID:ChrisG0x20，项目名称:gdb，代码行数:31，代码来源:coff-mips.c

示例9: HOWTO

	      }
	  }
	  break;
	}
    }
}

#define R_RELWORD     1
#define R_RELLONG     2
#define R_RELWORD_NEG 3
#define R_RELLONG_NEG 4

reloc_howto_type versados_howto_table[] =
{
  HOWTO (R_RELWORD, 0, 1, 16, FALSE,
	 0, complain_overflow_dont, 0,
	 "+v16", TRUE, 0x0000ffff, 0x0000ffff, FALSE),
  HOWTO (R_RELLONG, 0, 2, 32, FALSE,
	 0, complain_overflow_dont, 0,
	 "+v32", TRUE, 0xffffffff, 0xffffffff, FALSE),

  HOWTO (R_RELWORD_NEG, 0, -1, 16, FALSE,
	 0, complain_overflow_dont, 0,
	 "-v16", TRUE, 0x0000ffff, 0x0000ffff, FALSE),
  HOWTO (R_RELLONG_NEG, 0, -2, 32, FALSE,
	 0, complain_overflow_dont, 0,
	 "-v32", TRUE, 0xffffffff, 0xffffffff, FALSE),
};

static int
get_offset (int len, unsigned char *ptr)

开发者ID:3125788，项目名称:android_toolchain_gdb，代码行数:31，代码来源:versados.c

示例10: PARAMS

static bfd_boolean mcore_elf_check_relocs
  PARAMS ((bfd *, struct bfd_link_info *, asection *,
	   const Elf_Internal_Rela *));

static reloc_howto_type * mcore_elf_howto_table [(int) R_MCORE_max];

static reloc_howto_type mcore_elf_howto_raw[] =
{
  /* This reloc does nothing.  */
  HOWTO (R_MCORE_NONE,		/* type */
	 0,			/* rightshift */
	 2,			/* size (0 = byte, 1 = short, 2 = long) */
	 32,			/* bitsize */
	 FALSE,			/* pc_relative */
	 0,			/* bitpos */
	 complain_overflow_bitfield,  /* complain_on_overflow */
	 NULL,                  /* special_function */
	 "R_MCORE_NONE",	/* name */
	 FALSE,			/* partial_inplace */
	 0,			/* src_mask */
	 0,			/* dst_mask */
	 FALSE),		/* pcrel_offset */

  /* A standard 32 bit relocation.  */
  HOWTO (R_MCORE_ADDR32,	/* type */
	 0,			/* rightshift */
	 2,			/* size (0 = byte, 1 = short, 2 = long) */
	 32,			/* bitsize */
	 FALSE,			/* pc_relative */
	 0,			/* bitpos */
	 complain_overflow_bitfield, /* complain_on_overflow */

开发者ID:duduclx，项目名称:PS2DEV，代码行数:31，代码来源:elf32-mcore.c

示例11: PARAMS

  PARAMS ((bfd *, struct bfd_link_info *, asection *,
	   const Elf_Internal_Rela *));
static asection * xstormy16_elf_gc_mark_hook
  PARAMS ((asection *, struct bfd_link_info *, Elf_Internal_Rela *,
	   struct elf_link_hash_entry *, Elf_Internal_Sym *));

static reloc_howto_type xstormy16_elf_howto_table [] =
{
  /* This reloc does nothing.  */
  HOWTO (R_XSTORMY16_NONE,	/* type */
	 0,			/* rightshift */
	 2,			/* size (0 = byte, 1 = short, 2 = long) */
	 32,			/* bitsize */
	 FALSE,			/* pc_relative */
	 0,			/* bitpos */
	 complain_overflow_bitfield, /* complain_on_overflow */
	 bfd_elf_generic_reloc,	/* special_function */
	 "R_XSTORMY16_NONE",	/* name */
	 FALSE,			/* partial_inplace */
	 0,			/* src_mask */
	 0,			/* dst_mask */
	 FALSE),		/* pcrel_offset */

  /* A 32 bit absolute relocation.  */
  HOWTO (R_XSTORMY16_32,	/* type */
	 0,			/* rightshift */
	 2,			/* size (0 = byte, 1 = short, 2 = long) */
	 32,			/* bitsize */
	 FALSE,			/* pc_relative */
	 0,			/* bitpos */
	 complain_overflow_dont, /* complain_on_overflow */

开发者ID:sjohnston-adventiumlabs，项目名称:xen-micart-scheduler，代码行数:31，代码来源:elf32-xstormy16.c

示例12: COFF_DEFAULT_SECTION_ALIGNMENT_POWER

Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */

#include "bfd.h"
#include "sysdep.h"
#include "obstack.h"
#include "libbfd.h"
#include "bfdlink.h"
#include "coff/z8k.h"
#include "coff/internal.h"
#include "libcoff.h"

#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (1)

static reloc_howto_type r_imm32 =
HOWTO (R_IMM32, 0, 1, 32, false, 0,
       complain_overflow_bitfield, 0, "r_imm32", true, 0xffffffff,
       0xffffffff, false);

static reloc_howto_type r_imm4l =
HOWTO (R_IMM4L, 0, 1, 4, false, 0,
       complain_overflow_bitfield, 0, "r_imm4l", true, 0xf, 0xf, false);

static reloc_howto_type r_da =
HOWTO (R_IMM16, 0, 1, 16, false, 0,
       complain_overflow_bitfield, 0, "r_da", true, 0x0000ffff, 0x0000ffff,
       false);

static reloc_howto_type r_imm8 =
HOWTO (R_IMM8, 0, 1, 8, false, 0,
       complain_overflow_bitfield, 0, "r_imm8", true, 0x000000ff, 0x000000ff,
       false);

开发者ID:chuzhufei，项目名称:ViewAcdemicLinuxCode，代码行数:31，代码来源:coff-z8k.c

示例13: PARAMS

#include "sysdep.h"
#include "libbfd.h"
#include "bfdlink.h"
#include "coff/h8500.h"
#include "coff/internal.h"
#include "libcoff.h"

static int  coff_h8500_select_reloc PARAMS ((reloc_howto_type *));
static void rtype2howto      PARAMS ((arelent *, struct internal_reloc *));
static void reloc_processing PARAMS ((arelent *, struct internal_reloc *, asymbol **, bfd *, asection *));
static void extra_case       PARAMS ((bfd *, struct bfd_link_info *, struct bfd_link_order *, arelent *, bfd_byte *, unsigned int *, unsigned int *));

#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (1)

static reloc_howto_type r_imm8 =
    HOWTO (R_H8500_IMM8, 0, 1, 8, FALSE, 0,
           complain_overflow_bitfield, 0, "r_imm8", TRUE, 0x000000ff, 0x000000ff, FALSE);

static reloc_howto_type r_imm16 =
    HOWTO (R_H8500_IMM16, 0, 1, 16, FALSE, 0,
           complain_overflow_bitfield, 0, "r_imm16", TRUE, 0x0000ffff, 0x0000ffff, FALSE);

static reloc_howto_type r_imm24 =
    HOWTO (R_H8500_IMM24, 0, 1, 24, FALSE, 0,
           complain_overflow_bitfield, 0, "r_imm24", TRUE, 0x00ffffff, 0x00ffffff, FALSE);

static reloc_howto_type r_imm32 =
    HOWTO (R_H8500_IMM32, 0, 1, 32, FALSE, 0,
           complain_overflow_bitfield, 0, "r_imm32", TRUE, 0xffffffff, 0xffffffff, FALSE);

static reloc_howto_type r_high8 =
    HOWTO (R_H8500_HIGH8, 0, 1, 8, FALSE, 0,

开发者ID:mbref，项目名称:gdb-65-microblaze，代码行数:32，代码来源:coff-h8500.c

示例14: HOWTO

  R_MN10200_24,
  R_MN10200_PCREL8,
  R_MN10200_PCREL16,
  R_MN10200_PCREL24,
  R_MN10200_MAX
};

static reloc_howto_type elf_mn10200_howto_table[] = {
  /* Dummy relocation.  Does nothing.  */
  HOWTO (R_MN10200_NONE,
	 0,
	 2,
	 16,
	 FALSE,
	 0,
	 complain_overflow_bitfield,
	 bfd_elf_generic_reloc,
	 "R_MN10200_NONE",
	 FALSE,
	 0,
	 0,
	 FALSE),
  /* Standard 32 bit reloc.  */
  HOWTO (R_MN10200_32,
	 0,
	 2,
	 32,
	 FALSE,
	 0,
	 complain_overflow_bitfield,
	 bfd_elf_generic_reloc,

开发者ID:3125788，项目名称:android_toolchain_gdb，代码行数:31，代码来源:elf-m10200.c

示例15: HOWTO

#include "elf-bfd.h"
#include "elf/d10v.h"

/* Use REL instead of RELA to save space.  */
#define USE_REL	1

static reloc_howto_type elf_d10v_howto_table[] =
{
  /* This reloc does nothing.  */
  HOWTO (R_D10V_NONE,		/* Type.  */
	 0,			/* Rightshift.  */
	 3,			/* Size (0 = byte, 1 = short, 2 = long).  */
	 0,			/* Bitsize.  */
	 FALSE,			/* PC_relative.  */
	 0,			/* Bitpos.  */
	 complain_overflow_dont,/* Complain_on_overflow.  */
	 bfd_elf_generic_reloc, /* Special_function.  */
	 "R_D10V_NONE",		/* Name.  */
	 FALSE,			/* Partial_inplace.  */
	 0,			/* Src_mask.  */
	 0,			/* Dst_mask.  */
	 FALSE),		/* PCrel_offset.  */

  /* An PC Relative 10-bit relocation, shifted by 2, right container.  */
  HOWTO (R_D10V_10_PCREL_R,	/* Type.  */
	 2,	                /* Rightshift.  */
	 2,	                /* Size (0 = byte, 1 = short, 2 = long).  */
	 8,	                /* Bitsize.  */
	 TRUE,	        	/* PC_relative.  */
	 0,	                /* Bitpos.  */
	 complain_overflow_signed, /* Complain_on_overflow.  */

开发者ID:Winter3un，项目名称:ctf_task，代码行数:31，代码来源:elf32-d10v.c

示例16: PARAMS

PARAMS ((bfd *abfd, Elf_Internal_Note *note));

/* Note: code such as elf32_arm_reloc_type_lookup expect to use e.g.
   R_ARM_PC24 as an index into this, and find the R_ARM_PC24 HOWTO
   in that slot.  */

static reloc_howto_type elf32_arm_howto_table[] =
{
    /* No relocation */
    HOWTO (R_ARM_NONE,		/* type */
    0,			/* rightshift */
    0,			/* size (0 = byte, 1 = short, 2 = long) */
    0,			/* bitsize */
    FALSE,			/* pc_relative */
    0,			/* bitpos */
    complain_overflow_dont,/* complain_on_overflow */
    bfd_elf_generic_reloc,	/* special_function */
    "R_ARM_NONE",		/* name */
    FALSE,			/* partial_inplace */
    0,			/* src_mask */
    0,			/* dst_mask */
    FALSE),		/* pcrel_offset */

    HOWTO (R_ARM_PC24,		/* type */
    2,			/* rightshift */
    2,			/* size (0 = byte, 1 = short, 2 = long) */
    24,			/* bitsize */
    TRUE,			/* pc_relative */
    0,			/* bitpos */
    complain_overflow_signed,/* complain_on_overflow */
    bfd_elf_generic_reloc,	/* special_function */

开发者ID:nielx，项目名称:haiku-serviceskit，代码行数:31，代码来源:elfarm-nabi.c

示例17: xgate_elf_bfd_link_hash_table_create

static struct bfd_link_hash_table*
xgate_elf_bfd_link_hash_table_create (bfd *);

/* Use REL instead of RELA to save space */
#define USE_REL	1

static reloc_howto_type elf_xgate_howto_table[] =
{
  /* This reloc does nothing.  */
  HOWTO (R_XGATE_NONE, /* type */
	 0, /* rightshift */
	 2, /* size (0 = byte, 1 = short, 2 = long) */
	 32, /* bitsize */
	 FALSE, /* pc_relative */
	 0, /* bitpos */
	 complain_overflow_dont,/* complain_on_overflow */
	 bfd_elf_generic_reloc, /* special_function */
	 "R_XGATE_NONE", /* name */
	 FALSE, /* partial_inplace */
	 0, /* src_mask */
	 0, /* dst_mask */
	 FALSE), /* pcrel_offset */

  /* A 8 bit absolute relocation.  */
  HOWTO (R_XGATE_8, /* type */
	 0, /* rightshift */
	 0, /* size (0 = byte, 1 = short, 2 = long) */
	 8, /* bitsize */
	 FALSE, /* pc_relative */
	 0, /* bitpos */
	 complain_overflow_bitfield, /* complain_on_overflow */

开发者ID:dov，项目名称:gdb，代码行数:31，代码来源:elf32-xgate.c

示例18: MINUS_ONE

  mdata->header.cputype = BFD_MACH_O_CPU_TYPE_X86_64;
  mdata->header.cpusubtype = BFD_MACH_O_CPU_SUBTYPE_X86_ALL;
  mdata->header.byteorder = BFD_ENDIAN_LITTLE;
  mdata->header.version = 2;

  return TRUE;
}

/* In case we are on a 32-bit machine, construct a 64-bit "-1" value.  */
#define MINUS_ONE (~ (bfd_vma) 0)

static reloc_howto_type x86_64_howto_table[]=
{
  /* 0 */
  HOWTO(BFD_RELOC_64, 0, 4, 64, FALSE, 0,
	complain_overflow_bitfield,
	NULL, "64",
	FALSE, MINUS_ONE, MINUS_ONE, FALSE),
  HOWTO(BFD_RELOC_32, 0, 2, 32, FALSE, 0,
	complain_overflow_bitfield,
	NULL, "32",
	FALSE, 0xffffffff, 0xffffffff, FALSE),
  HOWTO(BFD_RELOC_32_PCREL, 0, 2, 32, TRUE, 0,
	complain_overflow_bitfield,
	NULL, "DISP32",
	FALSE, 0xffffffff, 0xffffffff, TRUE),
  HOWTO(BFD_RELOC_MACH_O_X86_64_PCREL32_1, 0, 2, 32, TRUE, 0,
	complain_overflow_bitfield,
	NULL, "DISP32_1",
	FALSE, 0xffffffff, 0xffffffff, TRUE),
  /* 4 */
  HOWTO(BFD_RELOC_MACH_O_X86_64_PCREL32_2, 0, 2, 32, TRUE, 0,

开发者ID:cooljeanius，项目名称:apple-gdb-1824，代码行数:32，代码来源:mach-o-x86-64.c

示例19: HOWTO

#include "sysdep.h"
#include "libbfd.h"
#include "elf-bfd.h"
#include "elf/openrisc.h"
#include "libiberty.h"

static reloc_howto_type openrisc_elf_howto_table[] =
{
  /* This reloc does nothing.  */
  HOWTO (R_OPENRISC_NONE,	/* type */
	 0,			/* rightshift */
	 2,			/* size (0 = byte, 1 = short, 2 = long) */
	 32,			/* bitsize */
	 FALSE,			/* pc_relative */
	 0,			/* bitpos */
	 complain_overflow_bitfield, /* complain_on_overflow */
	 bfd_elf_generic_reloc,	/* special_function */
	 "R_OPENRISC_NONE",	/* name */
	 FALSE,			/* partial_inplace */
	 0,			/* src_mask */
	 0,			/* dst_mask */
	 FALSE),		/* pcrel_offset */

  /* A PC relative 26 bit relocation, right shifted by 2.  */
  HOWTO (R_OPENRISC_INSN_REL_26, /* type */
	 2,			/* rightshift */
	 2,			/* size (0 = byte, 1 = short, 2 = long) */
	 26,			/* bitsize */
	 TRUE,			/* pc_relative */
	 0,			/* bitpos */
	 complain_overflow_signed, /* complain_on_overflow */

开发者ID:3125788，项目名称:android_toolchain_gdb，代码行数:31，代码来源:elf32-openrisc.c

示例20: COFF_DEFAULT_SECTION_ALIGNMENT_POWER

#include "sysdep.h"
#include "bfd.h"
#include "libbfd.h"
#include "coff/apollo.h"
#include "coff/internal.h"
#include "libcoff.h"

#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (3)

#ifdef ONLY_DECLARE_RELOCS
extern reloc_howto_type apollocoff_howto_table[];
#else
reloc_howto_type apollocoff_howto_table[] =
  {
    HOWTO (R_RELBYTE,	       0,  0,  	8,  FALSE, 0, complain_overflow_bitfield, 0, "8",	TRUE, 0x000000ff,0x000000ff, FALSE),
    HOWTO (R_RELWORD,	       0,  1, 	16, FALSE, 0, complain_overflow_bitfield, 0, "16",	TRUE, 0x0000ffff,0x0000ffff, FALSE),
    HOWTO (R_RELLONG,	       0,  2, 	32, FALSE, 0, complain_overflow_bitfield, 0, "32",	TRUE, 0xffffffff,0xffffffff, FALSE),
    HOWTO (R_PCRBYTE,	       0,  0, 	8,  TRUE,  0, complain_overflow_signed,   0, "DISP8",   TRUE, 0x000000ff,0x000000ff, FALSE),
    HOWTO (R_PCRWORD,	       0,  1, 	16, TRUE,  0, complain_overflow_signed,   0, "DISP16",  TRUE, 0x0000ffff,0x0000ffff, FALSE),
    HOWTO (R_PCRLONG,	       0,  2, 	32, TRUE,  0, complain_overflow_signed,   0, "DISP32",  TRUE, 0xffffffff,0xffffffff, FALSE),
    HOWTO (R_RELLONG_NEG,      0,  -2, 	32, FALSE, 0, complain_overflow_bitfield, 0, "-32",	TRUE, 0xffffffff,0xffffffff, FALSE),
  };
#endif /* not ONLY_DECLARE_RELOCS */

#ifndef BADMAG
#define BADMAG(x) M68KBADMAG(x)
#endif
#define APOLLO_M68 1		/* Customize coffcode.h */

/* Turn a howto into a reloc number.  */

开发者ID:BGmot，项目名称:playbook-dev-tools，代码行数:30，代码来源:coff-apollo.c

注：本文中的HOWTO函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ HPDF_Array_Add函数代码示例发布时间：2022-05-30

C++ HOST_c2l函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18261|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9674|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8177|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8548|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8456|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9388|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8427|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7862|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8411|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ HOWTO函数代码示例

示例1: HOWTO

示例2: sections

示例3: HOWTO

示例4: HOWTO

示例5: HOWTO

示例6: HOWTO

示例7: fr30_elf_i20_reloc

示例8: HOWTO

示例9: HOWTO

示例10: PARAMS

示例11: PARAMS

示例12: COFF_DEFAULT_SECTION_ALIGNMENT_POWER

示例13: PARAMS

示例14: HOWTO

示例15: HOWTO

示例16: PARAMS

示例17: xgate_elf_bfd_link_hash_table_create

示例18: MINUS_ONE

示例19: HOWTO

示例20: COFF_DEFAULT_SECTION_ALIGNMENT_POWER

请发表评论

全部评论

上一篇：

下一篇：

dphi-official/Machine_Learning_Bootcamp

tianli/matlab_offscreen: Matlab offscree

win7系统注册表编辑器打开的操作方法

これがマストドンだ！ 使い方からインスタ

芙蓉王（硬领航）多少钱一包？

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053

これがマストドンだ！使い方からインスタ