C++ HSD_DBG函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中HSD_DBG函数的典型用法代码示例。如果您正苦于以下问题：C++ HSD_DBG函数的具体用法？C++ HSD_DBG怎么用？C++ HSD_DBG使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了HSD_DBG函数的18个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: gpio_irq_handler

static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
{
	struct hsd_info *hi = (struct hsd_info *) dev_id;

	int state = gpio_get_value_cansleep(hi->gpio_detect);

	wake_lock_timeout(&ear_hook_wake_lock, 2 * HZ);

	HSD_DBG("gpio_irq_handler [%d]", state);
	if (state == EARJACK_REMOVED) {
		if (switch_get_state(&hi->sdev) != NO_DEVICE 
#ifdef HEADSET_REMOVE_ERROR
			|| insert_state_check
#endif
			){
			HSD_DBG("==== LGE headset removing\n");
			cancel_delayed_work_sync(&(hi->work_for_insert));
			queue_delayed_work(local_fsa8008_workqueue, &(hi->work_for_remove), FSA8008_DETECT_DELAY_MS );
		} else {
			HSD_DBG("err_invalid_state state = %d\n", state);
		}
	} else {
		if (switch_get_state(&hi->sdev) == NO_DEVICE) {
			HSD_DBG("==== LGE headset inserting\n");
			queue_delayed_work(local_fsa8008_workqueue, &(hi->work_for_insert), FSA8008_DETECT_DELAY_MS );
		} else {
			HSD_DBG("err_invalid_state state = %d\n", state);
		}
	}

	return IRQ_HANDLED;
}

开发者ID:Rondeau7，项目名称:lge_f6mt_aosp，代码行数:32，代码来源:hds_fsa8008.c

示例2: detect_work

static void detect_work(struct work_struct *work)
{
    int state;
    unsigned long irq_flags;

    local_irq_save(irq_flags);
    disable_irq(hi->irq);
    local_irq_restore(irq_flags);

    state = gpio_get_value(hi->gpio);

    HSD_DBG("hs:%d\n", state);

    local_irq_save(irq_flags);
    enable_irq(hi->irq);
    local_irq_restore(irq_flags);

    if (state != 1) {
        if (switch_get_state(&hi->sdev) == LGE_HEADSET) {
            HSD_DBG("==== LGE headset removing\n");
            remove_headset();
        }
        return;
    }

    if (state == 1) {
        if (switch_get_state(&hi->sdev) == NO_DEVICE) {
            HSD_DBG("==== LGE headset inserting\n");
            insert_headset();
        }
    }
    else {
        HSD_ERR("Invalid state\n");
    }
}

开发者ID:kerneldevs，项目名称:lge-kernel-msm7x27-ics-3.0.8，代码行数:35，代码来源:board-swift-headset.c

示例3: gpio_irq_handler

static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
{
	struct hsd_info *hi = (struct hsd_info *) dev_id;

	int state = gpio_get_value_cansleep(hi->gpio_detect);

	wake_lock_timeout(&ear_hook_wake_lock, 2 * HZ);

	HSD_DBG("gpio_irq_handler [%d]", state);

	if (state == EARJACK_REMOVED) {
/* 2012-12-04 Hoseong Kang([email protected]) do not check headset status before setting work queue [START] */
#if 1
		HSD_DBG("==== LGE headset removing\n");
		cancel_delayed_work_sync(&(hi->work_for_insert));
		queue_delayed_work(local_fsa8008_workqueue, &(hi->work_for_remove), FSA8008_DETECT_DELAY_MS );
	} else {
		HSD_DBG("==== LGE headset inserting\n");
		queue_delayed_work(local_fsa8008_workqueue, &(hi->work_for_insert), FSA8008_DETECT_DELAY_MS );
#else // origin
		if (switch_get_state(&hi->sdev) != NO_DEVICE) {
			HSD_DBG("==== LGE headset removing\n");
			cancel_delayed_work_sync(&(hi->work_for_insert));
			queue_delayed_work(local_fsa8008_workqueue, &(hi->work_for_remove), FSA8008_DETECT_DELAY_MS );
		} else {
			HSD_DBG("err_invalid_state state = %d\n", state);
		}
	} else {
		if (switch_get_state(&hi->sdev) == NO_DEVICE) {

开发者ID:SinxOner，项目名称:android_kernel_lge_p710，代码行数:29，代码来源:fsa8008.c

示例4: button_pressed

static void button_pressed(struct work_struct *work)
{
	struct delayed_work *dwork = container_of(work, struct delayed_work, work);
	struct hsd_info *hi = container_of(dwork, struct hsd_info, work_for_key_pressed);

	if (gpio_get_value_cansleep(hi->gpio_key) != BUTTON_PRESSED) {
		HSD_ERR("button_pressed but actually Fake pressed state!!\n");
		return;
	}
	if (gpio_get_value_cansleep(hi->gpio_detect) == EARJACK_REMOVED
		|| (switch_get_state(&hi->sdev) != LGE_HEADSET)) {
		HSD_ERR("button_pressed but ear jack is plugged out already! just ignore the event.\n");
		return;
	}
	if(atomic_read(&hi->btn_state)) {
		HSD_ERR("button_pressed but already pressed state!!\n");
		return;
	}

	hi->gpio_key_cnt += 1;
	if(hi->gpio_key_cnt < FSA8008_KEY_PRESS_TH_CNT) {
		queue_delayed_work(local_fsa8008_workqueue, &(hi->work_for_key_pressed), hi->latency_for_key );
		return;
	}

	HSD_DBG("button_pressed [%d] \n", hi->gpio_key_cnt);

	atomic_set(&hi->btn_state, 1);
	input_report_key(hi->input, hi->key_code, 1);
	input_sync(hi->input);
}

开发者ID:SinxOner，项目名称:android_kernel_lge_p710，代码行数:31，代码来源:fsa8008.c

示例5: remove_headset

static void remove_headset(struct hsd_info *hi)
{
    HSD_DBG("remove_headset");

    gpio_set_value_cansleep(hi->gpio_mic_en, 0);
    if (hi->set_headset_mic_bias) hi->set_headset_mic_bias(FALSE);

    atomic_set(&hi->is_3_pole_or_not, 1);
    mutex_lock(&hi->mutex_lock);
    switch_set_state(&hi->sdev, NO_DEVICE);
    mutex_unlock(&hi->mutex_lock);

    if (atomic_read(&hi->irq_key_enabled)) {
        unsigned long irq_flags;

        local_irq_save(irq_flags);
        disable_irq(hi->irq_key);
        local_irq_restore(irq_flags);
        atomic_set(&hi->irq_key_enabled, FALSE);
    }

    if (atomic_read(&hi->btn_state))
        button_released(hi);

}

开发者ID:mtmichaelson，项目名称:LGE_Connect_Kernel，代码行数:25，代码来源:fsa8008.c

示例6: button_released

static void button_released(struct work_struct *work)
{
	struct delayed_work *dwork = container_of(work, struct delayed_work, work);
	struct hsd_info *hi = container_of(dwork, struct hsd_info, work_for_key_released);

	if (gpio_get_value_cansleep(hi->gpio_key) != BUTTON_RELEASED) {
		HSD_ERR("button_released but actually Fake released state!!\n");
		return;
	}
	if (gpio_get_value_cansleep(hi->gpio_detect) == EARJACK_REMOVED
		|| (switch_get_state(&hi->sdev) != LGE_HEADSET)) {
		HSD_ERR("button_released but ear jack is plugged out already! just ignore the event.\n");
		return;
	}
	if(!atomic_read(&hi->btn_state)) {
		HSD_ERR("button_released but already released state!!\n");
		return;
	}

	HSD_DBG("button_released \n");

	atomic_set(&hi->btn_state, 0);
	hi->gpio_key_cnt = 0;
	input_report_key(hi->input, hi->key_code, 0);
	input_sync(hi->input);
}

开发者ID:SinxOner，项目名称:android_kernel_lge_p710，代码行数:26，代码来源:fsa8008.c

示例7: lge_hsd_remove

static int lge_hsd_remove(struct platform_device *pdev)
{
    struct hsd_info *hi = (struct hsd_info *)platform_get_drvdata(pdev);

    HSD_DBG("lge_hsd_remove");

    if (switch_get_state(&hi->sdev))
        remove_headset(hi);

    input_unregister_device(hi->input);
    switch_dev_unregister(&hi->sdev);

    free_irq(hi->irq_key, 0);
    free_irq(hi->irq_detect, 0);

    gpio_free(hi->gpio_mic_en);
    gpio_free(hi->gpio_key);
    gpio_free(hi->gpio_jpole);
    gpio_free(hi->gpio_detect);

    mutex_destroy(&hi->mutex_lock);

    kfree(hi);

    return 0;
}

开发者ID:mtmichaelson，项目名称:LGE_Connect_Kernel，代码行数:26，代码来源:fsa8008.c

示例8: remove_headset

static void remove_headset(struct hsd_info *hi)
{

	int has_mic = switch_get_state(&hi->sdev);

	HSD_DBG("remove_headset\n");
	if(atomic_read(&hi->is_3_pole_or_not) == 1)
		spmi_write(0x80);
	if(atomic_read(&hi->is_3_pole_or_not) == 0)
		gpio_direction_output(hi->gpio_mic_en, 0);

	atomic_set(&hi->is_3_pole_or_not, 1);
	mutex_lock(&hi->mutex_lock);
	switch_set_state(&hi->sdev, NO_DEVICE);
	mutex_unlock(&hi->mutex_lock);

	input_report_switch(hi->input, SW_HEADPHONE_INSERT, 0);
	if (has_mic == LGE_HEADSET)
		input_report_switch(hi->input, SW_MICROPHONE_INSERT, 0);
	input_sync(hi->input);

	if (atomic_read(&hi->irq_key_enabled)) {
		atomic_set(&hi->irq_key_enabled, FALSE);
	}

	if (atomic_read(&hi->btn_state))
		schedule_delayed_work(&(hi->work_for_key_released_remove),
				hi->latency_for_key );
	atomic_set(&hi->isdetect,FALSE);
}

开发者ID:JSkernel，项目名称:G_pro2_msm8974_JSKernel，代码行数:30，代码来源:hds_max1462x.c

示例9: lge_hsd_remove

static int lge_hsd_remove(struct platform_device *pdev)
{
	struct hsd_info *hi = (struct hsd_info *)platform_get_drvdata(pdev);

	HSD_DBG("lge_hsd_remove");

	if (switch_get_state(&hi->sdev))
#ifdef CONFIG_LGE_AUDIO_FSA8008_MODIFY
		queue_delayed_work(local_fsa8008_workqueue, &(hi->work_for_remove), 0 );
#else
		remove_headset(hi);
#endif

	input_unregister_device(hi->input);
	switch_dev_unregister(&hi->sdev);

	free_irq(hi->irq_key, 0);
	free_irq(hi->irq_detect, 0);

	gpio_free(hi->gpio_mic_en);
	gpio_free(hi->gpio_key);
	gpio_free(hi->gpio_jpole);
	gpio_free(hi->gpio_detect);

	mutex_destroy(&hi->mutex_lock);

	kfree(hi);

	return 0;
}

开发者ID:Rondeau7，项目名称:lge_f6mt_aosp，代码行数:30，代码来源:hds_fsa8008.c

示例10: button_irq_handler

static irqreturn_t button_irq_handler(int irq, void *dev_id)
{
	struct hsd_info *hi = (struct hsd_info *) dev_id;

	int value;

	wake_lock_timeout(&ear_hook_wake_lock, 2 * HZ);

	HSD_DBG("button_irq_handler");
/*
	if(gpio_get_value_cansleep(hi->gpio_mic_en) == 0)
	{
        HSD_DBG("button press returned");
        gpio_set_value_cansleep(hi->gpio_mic_en, 1);
		return IRQ_HANDLED;
	}
	*/
	value = gpio_get_value_cansleep(hi->gpio_key);

#ifdef	CONFIG_FSA8008_USE_LOCAL_WORK_QUEUE
	if (value) queue_delayed_work(local_fsa8008_workqueue, &(hi->work_for_key_pressed), hi->latency_for_key );
	else queue_delayed_work(local_fsa8008_workqueue, &(hi->work_for_key_released), hi->latency_for_key );
#else
	if (value) schedule_delayed_work(&(hi->work_for_key_pressed), hi->latency_for_key );
	else schedule_delayed_work(&(hi->work_for_key_released), hi->latency_for_key );
#endif

	return IRQ_HANDLED;
}

开发者ID:Rondeau7，项目名称:lge_f6mt_aosp，代码行数:29，代码来源:hds_fsa8008.c

示例11: button_pressed

static void button_pressed(struct work_struct *work)
{
	struct delayed_work *dwork = container_of(work, struct delayed_work, work);
	struct hsd_info *hi = container_of(dwork, struct hsd_info, work_for_key_pressed);
	struct qpnp_vadc_result result;
	int acc_read_value = 0;
	int i, rc;
	struct ear_3button_info_table *table;
	int table_size = ARRAY_SIZE(max1462x_ear_3button_type_data);

	if (hi->gpio_get_value_func(hi->gpio_detect) || (atomic_read(&hi->is_3_pole_or_not))) {
		HSD_ERR("button_pressed but 4 pole ear jack is plugged out already! just ignore the event.\n");
		return;
	}

	rc = qpnp_vadc_read(switch_vadc, P_MUX6_1_1, &result);

	if (rc < 0) {
		if (rc == -ETIMEDOUT) {
			pr_err("[DEBUG] button_pressed : adc read timeout \n");
		} else {
			pr_err("button_pressed: adc read error - %d\n", rc);
		}
	}
	acc_read_value = (int)result.physical;
	pr_info("%s: acc_read_value - %d\n", __func__, acc_read_value);

	for (i = 0; i < table_size; i++) {
		table = &max1462x_ear_3button_type_data[i];
		/*                                  
                                                              
   */
		if ((acc_read_value <= table->PERMISS_REANGE_MAX) &&
				(acc_read_value >= table->PERMISS_REANGE_MIN)) {
			HSD_DBG("button_pressed \n");
			atomic_set(&hi->btn_state, 1);
			switch (table->ADC_HEADSET_BUTTON) {
			case  KEY_MEDIA:
				input_report_key(hi->input, KEY_MEDIA, 1);
				pr_info("%s: KEY_MEDIA \n", __func__);
				break;
			case KEY_VOLUMEUP:
				input_report_key(hi->input, KEY_VOLUMEUP, 1);
				pr_info("%s: KEY_VOLUMEUP \n", __func__);
				break;
			case KEY_VOLUMEDOWN:
				input_report_key(hi->input, KEY_VOLUMEDOWN, 1);
				pr_info("%s: KEY_VOLUMDOWN \n", __func__);
				break;
			default:
				break;
			}
			table->PRESS_OR_NOT = 1;
			input_sync(hi->input);
			break;
		}
	}
	return;
}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:59，代码来源:hds_max1462x.c

示例12: insert_headset

static void insert_headset(struct hsd_info *hi)
{
    int earjack_type;

    HSD_DBG("insert_headset");

    if (hi->set_headset_mic_bias) hi->set_headset_mic_bias(TRUE);
    gpio_set_value_cansleep(hi->gpio_mic_en, 1);

    msleep(hi->latency_for_detection);

    earjack_type = gpio_get_value_cansleep(hi->gpio_jpole);

    if (earjack_type == 1) {
        HSD_DBG("3 polarity earjack");

        atomic_set(&hi->is_3_pole_or_not, 1);

        mutex_lock(&hi->mutex_lock);
        switch_set_state(&hi->sdev, LGE_HEADSET_NO_MIC);
        mutex_unlock(&hi->mutex_lock);

        gpio_set_value_cansleep(hi->gpio_mic_en, 0);
        if (hi->set_headset_mic_bias) hi->set_headset_mic_bias(FALSE);

    } else {
        HSD_DBG("4 polarity earjack");

        atomic_set(&hi->is_3_pole_or_not, 0);

        mutex_lock(&hi->mutex_lock);
        switch_set_state(&hi->sdev, LGE_HEADSET);
        mutex_unlock(&hi->mutex_lock);

        if (!atomic_read(&hi->irq_key_enabled)) {
            unsigned long irq_flags;

            local_irq_save(irq_flags);
            enable_irq(hi->irq_key);
            local_irq_restore(irq_flags);

            atomic_set(&hi->irq_key_enabled, TRUE);
        }
    }

}

开发者ID:mtmichaelson，项目名称:LGE_Connect_Kernel，代码行数:46，代码来源:fsa8008.c

示例13: detect_work

static void detect_work(struct work_struct *work)
{
	int state;
	#if 0
	unsigned long irq_flags;
	#endif
	struct delayed_work *dwork = container_of(work, struct delayed_work, work);
	struct hsd_info *hi = container_of(dwork, struct hsd_info, work);

	HSD_DBG("detect_work");

	#if 0
	local_irq_save(irq_flags);
	disable_irq(hi->irq_detect);
	local_irq_restore(irq_flags);
#endif

	printk(KERN_INFO " dev=0x%x\n",(unsigned int)hi);

	state = gpio_get_value_cansleep(hi->gpio_detect);

	if (state == 1) {
		if (switch_get_state(&hi->sdev) != NO_DEVICE) {
			HSD_DBG("==== LGE headset removing\n");
			remove_headset(hi);
		} else {
			HSD_DBG("err_invalid_state state = %d\n", state);
		}
	} else {

		if (switch_get_state(&hi->sdev) == NO_DEVICE) {
			HSD_DBG("==== LGE headset inserting\n");
			insert_headset(hi);
		} else {
			HSD_DBG("err_invalid_state state = %d\n", state);
		}
	}

	#if 0
	local_irq_save(irq_flags);
	enable_irq(hi->irq_detect);
	local_irq_restore(irq_flags);
#endif
}

开发者ID:Rondeau7，项目名称:lge_f6mt_aosp，代码行数:44，代码来源:hds_fsa8008.c

示例14: button_irq_handler

static irqreturn_t button_irq_handler(int irq, void *dev_id)
{
    struct hsd_info *hi = (struct hsd_info *) dev_id;
    int value = 0;
    int fp = read_file(EARJACK_FILENAME);

    if(fp < 0)
    {


        HSD_DBG("button_irq_handler");

        value = gpio_get_value_cansleep(hi->gpio_key);

        if (value) button_pressed(hi);
        else button_released(hi);

        return IRQ_HANDLED;
    }
    else
    {
        if(fp)
        {

            HSD_DBG("button_irq_handler");

            value = gpio_get_value_cansleep(hi->gpio_key);

            if (value) button_pressed(hi);
            else button_released(hi);

            return IRQ_HANDLED;
        }
        else
        {

            return IRQ_NONE;
        }
    }

    return IRQ_NONE;
}

开发者ID:mtmichaelson，项目名称:LGE_Connect_Kernel，代码行数:42，代码来源:fsa8008.c

示例15: lge_hsd_init

static int __init lge_hsd_init(void)
{
    int ret;

    HSD_DBG("lge_hsd_init");
    ret = platform_driver_register(&lge_hsd_driver);
    if (ret) {
        HSD_ERR("Fail to register platform driver\n");
    }

    return ret;
}

开发者ID:mtmichaelson，项目名称:LGE_Connect_Kernel，代码行数:12，代码来源:fsa8008.c

示例16: insert_headset

static void insert_headset(struct hsd_info *hi)
{
	int earjack_type;

	HSD_DBG("insert_headset\n");
	if (atomic_read(&hi->isdetect)) {
		HSD_DBG("duplicate irq\n");
		return;
	}

	atomic_set(&hi->isdetect, TRUE);
	irq_set_irq_wake(hi->irq_key, 1);
	gpio_direction_output(hi->gpio_mic_en, 1);
	msleep(40);
	HSD_DBG("insert delay 40\n");
	/*                          
                    
                                
                                                           
                                            
                                                                */

	earjack_type = hi->gpio_get_value_func(hi->gpio_key);

	if (earjack_type == 1) {

		HSD_DBG("4 polarity earjack\n");

		atomic_set(&hi->is_3_pole_or_not, 0);

		mutex_lock(&hi->mutex_lock);
		switch_set_state(&hi->sdev, LGE_HEADSET);
		mutex_unlock(&hi->mutex_lock);

		if (!atomic_read(&hi->irq_key_enabled)) {
			HSD_DBG("irq_key_enabled = FALSE\n");
			atomic_set(&hi->irq_key_enabled, TRUE);
		}

		input_report_switch(hi->input, SW_HEADPHONE_INSERT, 1);
		input_report_switch(hi->input, SW_MICROPHONE_INSERT, 1);
		input_sync(hi->input);

	} else {
		gpio_direction_output(hi->gpio_mic_en, 0);
		spmi_write(0x00);
		HSD_DBG("3 polarity earjack\n");
		atomic_set(&hi->is_3_pole_or_not, 1);

		mutex_lock(&hi->mutex_lock);
		switch_set_state(&hi->sdev, LGE_HEADSET_NO_MIC);
		mutex_unlock(&hi->mutex_lock);

		irq_set_irq_wake(hi->irq_key, 0);

		input_report_switch(hi->input, SW_HEADPHONE_INSERT, 1);
		input_sync(hi->input);
	}
}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:59，代码来源:hds_max1462x.c

示例17: button_pressed

static void button_pressed(struct hsd_info *hi)
{
    HSD_DBG("button_pressed \n");

    atomic_set(&hi->btn_state, 1);
    input_report_key(hi->input, hi->key_code, 1);

#ifdef AT_TEST_GPKD
    if(start_keylog == '1')
        hook_keycode = 'H';
#endif

    input_sync(hi->input);
}

开发者ID:mtmichaelson，项目名称:LGE_Connect_Kernel，代码行数:14，代码来源:fsa8008.c

示例18: gpio_irq_handler

static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
{
    struct hsd_info *hi = (struct hsd_info *) dev_id;

    int value = gpio_get_value_cansleep(hi->gpio_detect);

    HSD_DBG("gpio_irq_handler");

    if ((switch_get_state(&hi->sdev) ^ !value)) { /* the detection status is inverted */
        schedule_work(&(hi->work));
    }

    return IRQ_HANDLED;
}

开发者ID:mtmichaelson，项目名称:LGE_Connect_Kernel，代码行数:14，代码来源:fsa8008.c

注：本文中的HSD_DBG函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ HSL_DEV_ID_CHECK函数代码示例发布时间：2022-05-30

C++ HRESULT_CODE函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18264|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9677|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8177|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8548|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8456|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9388|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8427|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7862|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8411|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ HSD_DBG函数代码示例

示例1: gpio_irq_handler

示例2: detect_work

示例3: gpio_irq_handler

示例4: button_pressed

示例5: remove_headset

示例6: button_released

示例7: lge_hsd_remove

示例8: remove_headset

示例9: lge_hsd_remove

示例10: button_irq_handler

示例11: button_pressed

示例12: insert_headset

示例13: detect_work

示例14: button_irq_handler

示例15: lge_hsd_init

示例16: insert_headset

示例17: button_pressed

示例18: gpio_irq_handler

请发表评论

全部评论

上一篇：

下一篇：

dphi-official/Machine_Learning_Bootcamp

tianli/matlab_offscreen: Matlab offscree

win7系统注册表编辑器打开的操作方法

これがマストドンだ！使い方からインスタ

芙蓉王（硬领航）多少钱一包？

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053

客服电话

电子邮件

C++ HSD_DBG函数代码示例

示例1: gpio_irq_handler

示例2: detect_work

示例3: gpio_irq_handler

示例4: button_pressed

示例5: remove_headset

示例6: button_released

示例7: lge_hsd_remove

示例8: remove_headset

示例9: lge_hsd_remove

示例10: button_irq_handler

示例11: button_pressed

示例12: insert_headset

示例13: detect_work

示例14: button_irq_handler

示例15: lge_hsd_init

示例16: insert_headset

示例17: button_pressed

示例18: gpio_irq_handler

请发表评论

全部评论

上一篇：

下一篇：

dphi-official/Machine_Learning_Bootcamp

tianli/matlab_offscreen: Matlab offscree

win7系统注册表编辑器打开的操作方法

これがマストドンだ！ 使い方からインスタ

芙蓉王（硬领航）多少钱一包？

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053

これがマストドンだ！使い方からインスタ