本文整理汇总了C++中Handle_EXTI_Irq函数的典型用法代码示例。如果您正苦于以下问题:C++ Handle_EXTI_Irq函数的具体用法?C++ Handle_EXTI_Irq怎么用?C++ Handle_EXTI_Irq使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了Handle_EXTI_Irq函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: EXTI9_5_IRQHandler
void EXTI9_5_IRQHandler(void) {
Handle_EXTI_Irq(5);
Handle_EXTI_Irq(6);
Handle_EXTI_Irq(7);
Handle_EXTI_Irq(8);
Handle_EXTI_Irq(9);
}
开发者ID:HackDads,项目名称:micropython,代码行数:7,代码来源:stm32f4xx_it.c
示例2: EXTI9_5_IRQHandler
void EXTI9_5_IRQHandler(void) {
IRQ_ENTER(EXTI9_5_IRQn);
Handle_EXTI_Irq(5);
Handle_EXTI_Irq(6);
Handle_EXTI_Irq(7);
Handle_EXTI_Irq(8);
Handle_EXTI_Irq(9);
IRQ_EXIT(EXTI9_5_IRQn);
}
开发者ID:c-goosen,项目名称:micropython,代码行数:9,代码来源:stm32_it.c
示例3: EXTI15_10_IRQHandler
void EXTI15_10_IRQHandler(void) {
Handle_EXTI_Irq(10);
Handle_EXTI_Irq(11);
Handle_EXTI_Irq(12);
Handle_EXTI_Irq(13);
Handle_EXTI_Irq(14);
Handle_EXTI_Irq(15);
#if 0
// for CC3000 support, needs to be re-written to use new EXTI code
if (EXTI_GetITStatus(EXTI_Line14) != RESET) {
led_toggle(PYB_LED_G2);
/* these are needed for CC3000 support
extern void SpiIntGPIOHandler(void);
extern uint32_t exti14_enabled;
extern uint32_t exti14_missed;
//printf("-> EXTI14 en=%lu miss=%lu\n", exti14_enabled, exti14_missed);
if (exti14_enabled) {
exti14_missed = 0;
SpiIntGPIOHandler(); // CC3000 interrupt
} else {
exti14_missed = 1;
}
*/
EXTI_ClearITPendingBit(EXTI_Line14);
//printf("<- EXTI14 done\n");
}
#endif
}
开发者ID:aitjcize,项目名称:micropython,代码行数:29,代码来源:exti.c
示例4: EXTI15_10_IRQHandler
void EXTI15_10_IRQHandler(void) {
Handle_EXTI_Irq(10);
Handle_EXTI_Irq(11);
Handle_EXTI_Irq(12);
Handle_EXTI_Irq(13);
Handle_EXTI_Irq(14);
Handle_EXTI_Irq(15);
}
开发者ID:HackDads,项目名称:micropython,代码行数:8,代码来源:stm32f4xx_it.c
示例5: EXTI15_10_IRQHandler
void EXTI15_10_IRQHandler(void) {
IRQ_ENTER(EXTI15_10_IRQn);
Handle_EXTI_Irq(10);
Handle_EXTI_Irq(11);
Handle_EXTI_Irq(12);
Handle_EXTI_Irq(13);
Handle_EXTI_Irq(14);
Handle_EXTI_Irq(15);
IRQ_EXIT(EXTI15_10_IRQn);
}
开发者ID:c-goosen,项目名称:micropython,代码行数:10,代码来源:stm32_it.c
示例6: RTC_WKUP_IRQHandler
void RTC_WKUP_IRQHandler(void) {
Handle_EXTI_Irq(EXTI_RTC_WAKEUP);
}
开发者ID:HackDads,项目名称:micropython,代码行数:3,代码来源:stm32f4xx_it.c
示例7: TAMP_STAMP_IRQHandler
void TAMP_STAMP_IRQHandler(void) {
Handle_EXTI_Irq(EXTI_RTC_TIMESTAMP);
}
开发者ID:HackDads,项目名称:micropython,代码行数:3,代码来源:stm32f4xx_it.c
示例8: ETH_WKUP_IRQHandler
void ETH_WKUP_IRQHandler(void) {
Handle_EXTI_Irq(EXTI_ETH_WAKEUP);
}
开发者ID:HackDads,项目名称:micropython,代码行数:3,代码来源:stm32f4xx_it.c
示例9: OTG_HS_WKUP_IRQHandler
void OTG_HS_WKUP_IRQHandler(void) {
Handle_EXTI_Irq(20);
}
开发者ID:aitjcize,项目名称:micropython,代码行数:3,代码来源:exti.c
示例10: TAMP_STAMP_IRQHandler
void TAMP_STAMP_IRQHandler(void) {
IRQ_ENTER(TAMP_STAMP_IRQn);
Handle_EXTI_Irq(EXTI_RTC_TIMESTAMP);
IRQ_EXIT(TAMP_STAMP_IRQn);
}
开发者ID:c-goosen,项目名称:micropython,代码行数:5,代码来源:stm32_it.c
示例11: RTC_Alarm_IRQHandler
void RTC_Alarm_IRQHandler(void) {
IRQ_ENTER(RTC_Alarm_IRQn);
Handle_EXTI_Irq(EXTI_RTC_ALARM);
IRQ_EXIT(RTC_Alarm_IRQn);
}
开发者ID:c-goosen,项目名称:micropython,代码行数:5,代码来源:stm32_it.c
示例12: EXTI3_IRQHandler
void EXTI3_IRQHandler(void) {
Handle_EXTI_Irq(3);
}
开发者ID:HackDads,项目名称:micropython,代码行数:3,代码来源:stm32f4xx_it.c
示例13: EXTI4_IRQHandler
void EXTI4_IRQHandler(void) {
Handle_EXTI_Irq(4);
}
开发者ID:HackDads,项目名称:micropython,代码行数:3,代码来源:stm32f4xx_it.c
示例14: EXTI1_IRQHandler
void EXTI1_IRQHandler(void) {
Handle_EXTI_Irq(1);
}
开发者ID:HackDads,项目名称:micropython,代码行数:3,代码来源:stm32f4xx_it.c
示例15: EXTI2_IRQHandler
void EXTI2_IRQHandler(void) {
Handle_EXTI_Irq(2);
}
开发者ID:HackDads,项目名称:micropython,代码行数:3,代码来源:stm32f4xx_it.c
示例16: EXTI0_IRQHandler
/**
* @brief These functions handle the EXTI interrupt requests.
* @param None
* @retval None
*/
void EXTI0_IRQHandler(void) {
Handle_EXTI_Irq(0);
}
开发者ID:HackDads,项目名称:micropython,代码行数:8,代码来源:stm32f4xx_it.c
示例17: RTC_WKUP_IRQHandler
void RTC_WKUP_IRQHandler(void) {
Handle_EXTI_Irq(22);
}
开发者ID:aitjcize,项目名称:micropython,代码行数:3,代码来源:exti.c
示例18: TAMP_STAMP_IRQHandler
void TAMP_STAMP_IRQHandler(void) {
Handle_EXTI_Irq(21);
}
开发者ID:aitjcize,项目名称:micropython,代码行数:3,代码来源:exti.c
示例19: EXTI4_IRQHandler
void EXTI4_IRQHandler(void) {
IRQ_ENTER(EXTI4_IRQn);
Handle_EXTI_Irq(4);
IRQ_EXIT(EXTI4_IRQn);
}
开发者ID:c-goosen,项目名称:micropython,代码行数:5,代码来源:stm32_it.c
示例20: OTG_FS_WKUP_IRQHandler
void OTG_FS_WKUP_IRQHandler(void) {
Handle_EXTI_Irq(18);
}
开发者ID:aitjcize,项目名称:micropython,代码行数:3,代码来源:exti.c
注:本文中的Handle_EXTI_Irq函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论