C++ HiSax_getrev函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中HiSax_getrev函数的典型用法代码示例。如果您正苦于以下问题：C++ HiSax_getrev函数的具体用法？C++ HiSax_getrev怎么用？C++ HiSax_getrev使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了HiSax_getrev函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: setup_enternow_pci

/* called by config.c */
int __devinit
setup_enternow_pci(struct IsdnCard *card)
{
	int ret;
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

#ifdef __BIG_ENDIAN
#error "not running on big endian machines now"
#endif

        strcpy(tmp, enternow_pci_rev);
	printk(KERN_INFO "HiSax: Formula-n Europe AG enter:now ISDN PCI driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_ENTERNOW)
		return(0);
	test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);

	for ( ;; )
	{
		if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET,
			PCI_DEVICE_ID_TIGERJET_300,  dev_netjet))) {
			ret = en_pci_probe(dev_netjet, cs);
			if (!ret)
				return(0);
		} else {
                        printk(KERN_WARNING "enter:now PCI: No PCI card found\n");
			return(0);
		}

		en_cs_init(card, cs);
		break;
	}

        return en_cs_init_rest(card, cs);
}

开发者ID:appleorange1，项目名称:asus-rt-n12-lx，代码行数:36，代码来源:enternow_pci.c

示例2: setup_bkm_a4t

int __devinit
setup_bkm_a4t(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];
	u_int pci_memaddr = 0, found = 0;
	int ret;

	strcpy(tmp, bkm_a4t_revision);
	printk(KERN_INFO "HiSax: T-Berkom driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ == ISDN_CTYPE_BKM_A4T) {
		cs->subtyp = BKM_A4T;
	} else
		return (0);

	while ((dev_a4t = hisax_find_pci_device(PCI_VENDOR_ID_ZORAN,
						PCI_DEVICE_ID_ZORAN_36120, dev_a4t))) {
		ret = a4t_pci_probe(dev_a4t, cs, &found, &pci_memaddr);
		if (!ret)
			return (0);
		if (ret > 0)
			break;
	}
	if (!found) {
		printk(KERN_WARNING "HiSax: Telekom A4T: Card not found\n");
		return (0);
	}
	if (!pci_memaddr) {
		printk(KERN_WARNING "HiSax: Telekom A4T: "
		       "No Memory base address\n");
		return (0);
	}

	return a4t_cs_init(card, cs, pci_memaddr);
}

开发者ID:openube，项目名称:android_kernel_sony_c2305，代码行数:35，代码来源:bkm_a4t.c

示例3: setup_sportster

int __init
setup_sportster(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, sportster_revision);
	printk(KERN_INFO "HiSax: USR Sportster driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_SPORTSTER)
		return (0);

	cs->hw.spt.cfg_reg = card->para[1];
	cs->irq = card->para[0];
	if (!get_io_range(cs))
		return (0);
	cs->hw.spt.isac = cs->hw.spt.cfg_reg + SPORTSTER_ISAC;
	cs->hw.spt.hscx[0] = cs->hw.spt.cfg_reg + SPORTSTER_HSCXA;
	cs->hw.spt.hscx[1] = cs->hw.spt.cfg_reg + SPORTSTER_HSCXB;
	
	switch(cs->irq) {
		case 5:	cs->hw.spt.res_irq = 1;
			break;
		case 7:	cs->hw.spt.res_irq = 2;
			break;
		case 10:cs->hw.spt.res_irq = 3;
			break;
		case 11:cs->hw.spt.res_irq = 4;
			break;
		case 12:cs->hw.spt.res_irq = 5;
			break;
		case 14:cs->hw.spt.res_irq = 6;
			break;
		case 15:cs->hw.spt.res_irq = 7;
			break;
		default:release_io_sportster(cs);
			printk(KERN_WARNING "Sportster: wrong IRQ\n");
			return(0);
	}
	printk(KERN_INFO "HiSax: %s config irq:%d cfg:0x%X\n",
		CardType[cs->typ], cs->irq, cs->hw.spt.cfg_reg);
	setup_isac(cs);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &Sportster_card_msg;
	cs->irq_func = &sportster_interrupt;
	ISACVersion(cs, "Sportster:");
	if (HscxVersion(cs, "Sportster:")) {
		printk(KERN_WARNING
		       "Sportster: wrong HSCX versions check IO address\n");
		release_io_sportster(cs);
		return (0);
	}
	return (1);
}

开发者ID:jameshilliard，项目名称:actiontec_opensrc_mi424wr-rev-ef_fw-20-19-8，代码行数:59，代码来源:sportster.c

示例4: setup_saphir

int __init
setup_saphir(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, saphir_rev);
	printk(KERN_INFO "HiSax: HST Saphir driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_HSTSAPHIR)
		return (0);

	/* IO-Ports */
	cs->hw.saphir.cfg_reg = card->para[1];
	cs->hw.saphir.isac = card->para[1] + ISAC_DATA;
	cs->hw.saphir.hscx = card->para[1] + HSCX_DATA;
	cs->hw.saphir.ale = card->para[1] + ADDRESS_REG;
	cs->irq = card->para[0];
	if (check_region((cs->hw.saphir.cfg_reg), 6)) {
		printk(KERN_WARNING
			"HiSax: %s config port %x-%x already in use\n",
			CardType[card->typ],
			cs->hw.saphir.cfg_reg,
			cs->hw.saphir.cfg_reg + 5);
		return (0);
	} else
		request_region(cs->hw.saphir.cfg_reg,6, "saphir");

	printk(KERN_INFO
	       "HiSax: %s config irq:%d io:0x%X\n",
	       CardType[cs->typ], cs->irq,
	       cs->hw.saphir.cfg_reg);

	cs->hw.saphir.timer.function = (void *) SaphirWatchDog;
	cs->hw.saphir.timer.data = (long) cs;
	init_timer(&cs->hw.saphir.timer);
	cs->hw.saphir.timer.expires = jiffies + 4*HZ;
	add_timer(&cs->hw.saphir.timer);
	if (saphir_reset(cs)) {
		release_io_saphir(cs);
		return (0);
	}
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &saphir_card_msg;
	cs->irq_func = &saphir_interrupt;
	ISACVersion(cs, "saphir:");
	if (HscxVersion(cs, "saphir:")) {
		printk(KERN_WARNING
		    "saphir: wrong HSCX versions check IO address\n");
		release_io_saphir(cs);
		return (0);
	}
	return (1);
}

开发者ID:JBTech，项目名称:ralink_rt5350，代码行数:59，代码来源:saphir.c

示例5: setup_asuscom

int __init
setup_asuscom(struct IsdnCard *card)
{
	char tmp[64];

	strcpy(tmp, Asuscom_revision);
	printk(KERN_INFO "HiSax: Asuscom ISDNLink driver Rev. %s\n", HiSax_getrev(tmp));
#ifdef __ISAPNP__
	if (!card->para[1] && isapnp_present()) {
		struct pnp_card *pb;
		struct pnp_dev *pd;

		while(adev->card_vendor) {
			if ((pb = pnp_find_card(adev->card_vendor,
						adev->card_device,
						pnp_c))) {
				pnp_c = pb;
				pd = NULL;
				if ((pd = pnp_find_dev(pnp_c,
						       adev->vendor,
						       adev->function,
						       pd))) {
					printk(KERN_INFO "HiSax: %s detected\n",
						(char *)adev->driver_data);
					if (pnp_device_attach(pd) < 0) {
						printk(KERN_ERR "AsusPnP: attach failed\n");
						return 0;
					}
					if (pnp_activate_dev(pd) < 0) {
						printk(KERN_ERR "AsusPnP: activate failed\n");
						pnp_device_detach(pd);
						return 0;
					}
					if (!pnp_irq_valid(pd, 0) || !pnp_port_valid(pd, 0)) {
						printk(KERN_ERR "AsusPnP:some resources are missing %ld/%lx\n",
							pnp_irq(pd, 0), pnp_port_start(pd, 0));
						pnp_device_detach(pd);
						return(0);
					}
					card->para[1] = pnp_port_start(pd, 0);
					card->para[0] = pnp_irq(pd, 0);
					break;
				} else {
					printk(KERN_ERR "AsusPnP: PnP error card found, no device\n");
				}
			}
			adev++;
			pnp_c=NULL;
		} 
		if (!adev->card_vendor) {
			printk(KERN_INFO "AsusPnP: no ISAPnP card found\n");
			return(0);
		}
	}
#endif
	if (asuscom_probe(card->cs, card) < 0)
		return 0;
	return 1;
}

开发者ID:sarnobat，项目名称:knoppix，代码行数:59，代码来源:asuscom.c

示例6: setup_avm_a1_pcmcia

int __devinit
setup_avm_a1_pcmcia(struct IsdnCard *card)
{
	u_char model, vers;
	struct IsdnCardState *cs = card->cs;
	long flags;
	char tmp[64];


	strcpy(tmp, avm_revision);
	printk(KERN_INFO "HiSax: AVM A1 PCMCIA driver Rev. %s\n",
						 HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_A1_PCMCIA)
		return (0);

	cs->hw.avm.cfg_reg = card->para[1];
	cs->irq = card->para[0];


	save_flags(flags);
	outb(cs->hw.avm.cfg_reg+ASL1_OFFSET, ASL1_W_ENABLE_S0);
        sti();

	byteout(cs->hw.avm.cfg_reg+ASL0_OFFSET,0x00);
	HZDELAY(HZ / 5 + 1);
	byteout(cs->hw.avm.cfg_reg+ASL0_OFFSET,ASL0_W_RESET);
	HZDELAY(HZ / 5 + 1);
	byteout(cs->hw.avm.cfg_reg+ASL0_OFFSET,0x00);

	byteout(cs->hw.avm.cfg_reg+ASL0_OFFSET, ASL0_W_TDISABLE|ASL0_W_TRESET);

	restore_flags(flags);

	model = bytein(cs->hw.avm.cfg_reg+MODREG_OFFSET);
	vers = bytein(cs->hw.avm.cfg_reg+VERREG_OFFSET);

	printk(KERN_INFO "AVM A1 PCMCIA: io 0x%x irq %d model %d version %d\n",
				cs->hw.avm.cfg_reg, cs->irq, model, vers);

	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &AVM_card_msg;
	cs->irq_func = &avm_a1p_interrupt;

	ISACVersion(cs, "AVM A1 PCMCIA:");
	if (HscxVersion(cs, "AVM A1 PCMCIA:")) {
		printk(KERN_WARNING
		       "AVM A1 PCMCIA: wrong HSCX versions check IO address\n");
		return (0);
	}
	return (1);
}

开发者ID:romanalexander，项目名称:Trickles，代码行数:57，代码来源:avm_a1p.c

示例7: setup_hfcs

int __init
setup_hfcs(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, hfcs_revision);
	printk(KERN_INFO "HiSax: HFC-S driver Rev. %s\n", HiSax_getrev(tmp));
	cs->hw.hfcD.addr = card->para[1] & 0xfffe;
	cs->irq = card->para[0];
	cs->hw.hfcD.cip = 0;
	cs->hw.hfcD.int_s1 = 0;
	cs->hw.hfcD.send = NULL;
	cs->bcs[0].hw.hfc.send = NULL;
	cs->bcs[1].hw.hfc.send = NULL;
	cs->hw.hfcD.dfifosize = 512;
	cs->dc.hfcd.ph_state = 0;
	cs->hw.hfcD.fifo = 255;
	if (cs->typ == ISDN_CTYPE_TELES3C) {
		cs->hw.hfcD.bfifosize = 1024 + 512;
	} else if (cs->typ == ISDN_CTYPE_ACERP10) {
		cs->hw.hfcD.bfifosize = 7*1024 + 512;
	} else
		return (0);
	if (check_region((cs->hw.hfcD.addr), 2)) {
		printk(KERN_WARNING
		       "HiSax: %s config port %x-%x already in use\n",
		       CardType[card->typ],
		       cs->hw.hfcD.addr,
		       cs->hw.hfcD.addr + 2);
		return (0);
	} else {
		request_region(cs->hw.hfcD.addr, 2, "HFCS isdn");
	}
	printk(KERN_INFO
	       "HFCS: defined at 0x%x IRQ %d HZ %d\n",
	       cs->hw.hfcD.addr,
	       cs->irq, HZ);
	if (cs->typ == ISDN_CTYPE_TELES3C) {
		/* Teles 16.3c IO ADR is 0x200 | YY0U (YY Bit 15/14 address) */
		outb(0x00, cs->hw.hfcD.addr);
		outb(0x56, cs->hw.hfcD.addr | 1);
	} else if (cs->typ == ISDN_CTYPE_ACERP10) {
		/* Acer P10 IO ADR is 0x300 */
		outb(0x00, cs->hw.hfcD.addr);
		outb(0x57, cs->hw.hfcD.addr | 1);
	}
	set_cs_func(cs);
	cs->hw.hfcD.timer.function = (void *) hfcs_Timer;
	cs->hw.hfcD.timer.data = (long) cs;
	init_timer(&cs->hw.hfcD.timer);
	reset_hfcs(cs);
	cs->cardmsg = &hfcs_card_msg;
	cs->irq_func = &hfcs_interrupt;
	return (1);
}

开发者ID:TitaniumBoy，项目名称:lin，代码行数:56，代码来源:hfcscard.c

示例8: __initfunc

__initfunc(int
setup_ix1micro(struct IsdnCard *card))
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, ix1_revision);
	printk(KERN_INFO "HiSax: ITK IX1 driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_IX1MICROR2)
		return (0);

	/* IO-Ports */
	cs->hw.ix1.isac_ale = card->para[1] + ISAC_COMMAND_OFFSET;
	cs->hw.ix1.hscx_ale = card->para[1] + HSCX_COMMAND_OFFSET;
	cs->hw.ix1.isac = card->para[1] + ISAC_DATA_OFFSET;
	cs->hw.ix1.hscx = card->para[1] + HSCX_DATA_OFFSET;
	cs->hw.ix1.cfg_reg = card->para[1];
	cs->irq = card->para[0];
	if (cs->hw.ix1.cfg_reg) {
		if (check_region((cs->hw.ix1.cfg_reg), 4)) {
			printk(KERN_WARNING
			  "HiSax: %s config port %x-%x already in use\n",
			       CardType[card->typ],
			       cs->hw.ix1.cfg_reg,
			       cs->hw.ix1.cfg_reg + 4);
			return (0);
		} else
			request_region(cs->hw.ix1.cfg_reg, 4, "ix1micro cfg");
	}
	printk(KERN_INFO
	       "HiSax: %s config irq:%d io:0x%X\n",
	       CardType[cs->typ], cs->irq,
	       cs->hw.ix1.cfg_reg);
	ix1_reset(cs);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &ix1_card_msg;
	cs->irq_func = &ix1micro_interrupt;
	ISACVersion(cs, "ix1-Micro:");
	if (HscxVersion(cs, "ix1-Micro:")) {
		printk(KERN_WARNING
		    "ix1-Micro: wrong HSCX versions check IO address\n");
		release_io_ix1micro(cs);
		return (0);
	}
	return (1);
}

开发者ID:chinnyannieb，项目名称:empeg-hijack，代码行数:52，代码来源:ix1_micro.c

示例9: setup_mic

int __init
setup_mic(struct IsdnCard *card)
{
	int bytecnt;
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, mic_revision);
	printk(KERN_INFO "HiSax: mic driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_MIC)
		return (0);

	bytecnt = 8;
	cs->hw.mic.cfg_reg = card->para[1];
	cs->irq = card->para[0];
	cs->hw.mic.adr = cs->hw.mic.cfg_reg + MIC_ADR;
	cs->hw.mic.isac = cs->hw.mic.cfg_reg + MIC_ISAC;
	cs->hw.mic.hscx = cs->hw.mic.cfg_reg + MIC_HSCX;

	if (check_region((cs->hw.mic.cfg_reg), bytecnt)) {
		printk(KERN_WARNING
		       "HiSax: %s config port %x-%x already in use\n",
		       CardType[card->typ],
		       cs->hw.mic.cfg_reg,
		       cs->hw.mic.cfg_reg + bytecnt);
		return (0);
	} else {
		request_region(cs->hw.mic.cfg_reg, bytecnt, "mic isdn");
	}

	printk(KERN_INFO
	       "mic: defined at 0x%x IRQ %d\n",
	       cs->hw.mic.cfg_reg,
	       cs->irq);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &mic_card_msg;
	cs->irq_func = &mic_interrupt;
	ISACVersion(cs, "mic:");
	if (HscxVersion(cs, "mic:")) {
		printk(KERN_WARNING
		    "mic: wrong HSCX versions check IO address\n");
		release_io_mic(cs);
		return (0);
	}
	return (1);
}

开发者ID:dmgerman，项目名称:linux-pre-history，代码行数:52，代码来源:mic.c

示例10: HiSaxVersion

static void __init HiSaxVersion(void)
{
	char tmp[64];

	printk(KERN_INFO "HiSax: Linux Driver for passive ISDN cards\n");
#ifdef MODULE
	printk(KERN_INFO "HiSax: Version 3.5 (module)\n");
#else
	printk(KERN_INFO "HiSax: Version 3.5 (kernel)\n");
#endif
	strcpy(tmp, l1_revision);
	printk(KERN_INFO "HiSax: Layer1 Revision %s\n", HiSax_getrev(tmp));
	strcpy(tmp, l2_revision);
	printk(KERN_INFO "HiSax: Layer2 Revision %s\n", HiSax_getrev(tmp));
	strcpy(tmp, tei_revision);
	printk(KERN_INFO "HiSax: TeiMgr Revision %s\n", HiSax_getrev(tmp));
	strcpy(tmp, l3_revision);
	printk(KERN_INFO "HiSax: Layer3 Revision %s\n", HiSax_getrev(tmp));
	strcpy(tmp, lli_revision);
	printk(KERN_INFO "HiSax: LinkLayer Revision %s\n",
	       HiSax_getrev(tmp));
}

开发者ID:asmalldev，项目名称:linux，代码行数:22，代码来源:config.c

示例11: setup_saphir

int __init
setup_saphir(struct IsdnCard *card)
{
	char tmp[64];

	strcpy(tmp, saphir_rev);
	printk(KERN_INFO "HiSax: HST Saphir driver Rev. %s\n",
	       HiSax_getrev(tmp));

	if (saphir_probe(card->cs, card) < 0)
		return 0;
	return 1;
}

开发者ID:xricson，项目名称:knoppix，代码行数:13，代码来源:saphir.c

示例12: setup_t163c

int __init 
setup_t163c(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, teles163c_revision);
	printk(KERN_INFO "HiSax: Teles 16.3c driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_TELES3C)
		return (0);
	cs->debug = 0xff;
	cs->hw.hfcD.addr = card->para[1] & 0xfffe;
	cs->irq = card->para[0];
	cs->hw.hfcD.cip = 0;
	cs->hw.hfcD.int_s1 = 0;
	cs->hw.hfcD.send = NULL;
	cs->bcs[0].hw.hfc.send = NULL;
	cs->bcs[1].hw.hfc.send = NULL;
	cs->hw.hfcD.bfifosize = 1024 + 512;
	cs->hw.hfcD.dfifosize = 512;
	cs->ph_state = 0;
	cs->hw.hfcD.fifo = 255;
	if (check_region((cs->hw.hfcD.addr), 2)) {
		printk(KERN_WARNING
		       "HiSax: %s config port %x-%x already in use\n",
		       CardType[card->typ],
		       cs->hw.hfcD.addr,
		       cs->hw.hfcD.addr + 2);
		return (0);
	} else {
		request_region(cs->hw.hfcD.addr, 2, "teles3c isdn");
	}
	/* Teles 16.3c IO ADR is 0x200 | YY0U (YY Bit 15/14 address) */
	outb(0x00, cs->hw.hfcD.addr);
	outb(0x56, cs->hw.hfcD.addr | 1);
	printk(KERN_INFO
	       "teles3c: defined at 0x%x IRQ %d HZ %d\n",
	       cs->hw.hfcD.addr,
	       cs->irq, HZ);

	set_cs_func(cs);
	cs->hw.hfcD.timer.function = (void *) t163c_Timer;
	cs->hw.hfcD.timer.data = (long) cs;
	init_timer(&cs->hw.hfcD.timer);
	reset_t163c(cs);
	cs->cardmsg = &t163c_card_msg;
	return (1);
}

开发者ID:davidbau，项目名称:davej，代码行数:48，代码来源:teles3c.c

示例13: setstack_1tr6

void
setstack_1tr6(struct PStack *st)
{
	char tmp[64];

	st->lli.l4l3 = down1tr6;
	st->l2.l2l3 = up1tr6;
	st->l3.l3ml3 = man1tr6;
	st->l3.N303 = 0;

	strcpy(tmp, l3_1tr6_revision);
#ifdef CONFIG_DEBUG_PRINTK
	printk(KERN_INFO "HiSax: 1TR6 Rev. %s\n", HiSax_getrev(tmp));
#else
	;
#endif
}

开发者ID:Epirex，项目名称:Chrono_Kernel-1，代码行数:17，代码来源:l3_1tr6.c

示例14: setup_netjet_s

int __devinit
setup_netjet_s(struct IsdnCard *card)
{
	int ret;
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

#ifdef __BIG_ENDIAN
#error "not running on big endian machines now"
#endif
	strcpy(tmp, NETjet_S_revision);
#ifdef CONFIG_DEBUG_PRINTK
	printk(KERN_INFO "HiSax: Traverse Tech. NETjet-S driver Rev. %s\n", HiSax_getrev(tmp));
#else
	;
#endif
	if (cs->typ != ISDN_CTYPE_NETJET_S)
		return(0);
	test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);

	for ( ;; )
	{
		if ((dev_netjet = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET,
			PCI_DEVICE_ID_TIGERJET_300,  dev_netjet))) {
			ret = njs_pci_probe(dev_netjet, cs);
			if (!ret)
				return(0);
		} else {
#ifdef CONFIG_DEBUG_PRINTK
			printk(KERN_WARNING "NETjet-S: No PCI card found\n");
#else
			;
#endif
			return(0);
		}

		ret = njs_cs_init(card, cs);
		if (!ret)
			return(0);
		if (ret > 0)
			break;
		/* otherwise, ret < 0, continue looping */
	}

	return njs_cs_init_rest(card, cs);
}

开发者ID:Epirex，项目名称:Chrono_Kernel-1，代码行数:46，代码来源:nj_s.c

示例15: setup_diva

int __devinit
setup_diva(struct IsdnCard *card)
{
	int rc, have_card = 0;
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, Diva_revision);
	printk(KERN_INFO "HiSax: Eicon.Diehl Diva driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_DIEHLDIVA)
		return(0);
	cs->hw.diva.status = 0;

	rc = setup_diva_isa(card);
	if (!rc)
		return rc;
	if (rc > 0) {
		have_card = 1;
		goto ready;
	}

	rc = setup_diva_isapnp(card);
	if (!rc)
		return rc;
	if (rc > 0) {
		have_card = 1;
		goto ready;
	}

	rc = setup_diva_pci(card);
	if (!rc)
		return rc;
	if (rc > 0)
		have_card = 1;

ready:
	if (!have_card) {
		printk(KERN_WARNING "Diva: No ISA, ISAPNP or PCI card found\n");
		return(0);
	}

	return setup_diva_common(card->cs);
}

开发者ID:emuikernel，项目名称:WNR2000v4，代码行数:43，代码来源:diva.c

示例16: setup_elsa

int __devinit
setup_elsa(struct IsdnCard *card)
{
	long flags;
	int bytecnt;
	u_char val;
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, Elsa_revision);
	printk(KERN_INFO "HiSax: Elsa driver Rev. %s\n", HiSax_getrev(tmp));
	cs->hw.elsa.ctrl_reg = 0;
	cs->hw.elsa.status = 0;
	cs->hw.elsa.MFlag = 0;
	cs->subtyp = 0;
	if (cs->typ == ISDN_CTYPE_ELSA) {
		cs->hw.elsa.base = card->para[0];
		printk(KERN_INFO "Elsa: Microlink IO probing\n");
		if (cs->hw.elsa.base) {
			if (!(cs->subtyp = probe_elsa_adr(cs->hw.elsa.base,
							  cs->typ))) {
				printk(KERN_WARNING
				       "Elsa: no Elsa Microlink at %#lx\n",
				       cs->hw.elsa.base);
				return (0);
			}
		} else
			cs->hw.elsa.base = probe_elsa(cs);
		if (cs->hw.elsa.base) {
			cs->hw.elsa.cfg = cs->hw.elsa.base + ELSA_CONFIG;
			cs->hw.elsa.ctrl = cs->hw.elsa.base + ELSA_CONTROL;
			cs->hw.elsa.ale = cs->hw.elsa.base + ELSA_ALE;
			cs->hw.elsa.isac = cs->hw.elsa.base + ELSA_ISAC;
			cs->hw.elsa.itac = cs->hw.elsa.base + ELSA_ITAC;
			cs->hw.elsa.hscx = cs->hw.elsa.base + ELSA_HSCX;
			cs->hw.elsa.trig = cs->hw.elsa.base + ELSA_TRIG_IRQ;
			cs->hw.elsa.timer = cs->hw.elsa.base + ELSA_START_TIMER;
			val = bytein(cs->hw.elsa.cfg);
			if (cs->subtyp == ELSA_PC) {
				const u_char CARD_IrqTab[8] =
				{7, 3, 5, 9, 0, 0, 0, 0};
				cs->irq = CARD_IrqTab[(val & ELSA_IRQ_IDX_PC) >> 2];
			} else if (cs->subtyp == ELSA_PCC8) {

开发者ID:GunioRobot，项目名称:MI424WR_GEN2_Rev_E-F，代码行数:43，代码来源:elsa.c

示例17: setup_netjet_u

int __init
setup_netjet_u(struct IsdnCard *card)
{
	char tmp[64];
#ifdef __BIG_ENDIAN
#error "not running on big endian machines now"
#endif
	strcpy(tmp, NETjet_U_revision);
	printk(KERN_INFO "HiSax: Traverse Tech. NETspider-U driver Rev. %s\n",
	       HiSax_getrev(tmp));
	
	dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET,
				     PCI_DEVICE_ID_TIGERJET_300, dev_netjet);
	if (dev_netjet) {
		if (nj_u_probe(card->cs, dev_netjet))
			return 1;
		return 0;
	}
	printk(KERN_WARNING "NETspider-U: No PCI card found\n");
	return 0;
}

开发者ID:xricson，项目名称:knoppix，代码行数:21，代码来源:nj_u.c

示例18: setstack_1tr6

void
setstack_1tr6(struct PStack *st)
{
	char tmp[64];

	st->l4.l4l3 = down1tr6;
	st->l2.l2l3 = up1tr6;
	st->l3.t303 = 4000;
	st->l3.t304 = 20000;
	st->l3.t305 = 4000;
	st->l3.t308 = 4000;
	st->l3.t310 = 120000;
	st->l3.t313 = 4000;
	st->l3.t318 = 4000;
	st->l3.t319 = 4000;
	st->l3.n_t303 = 0;

	if (st->l3.channr & 1) {
		strcpy(tmp, l3_1tr6_revision);
		printk(KERN_NOTICE "HiSax: 1TR6 Rev. %s\n", HiSax_getrev(tmp));
	}
}

开发者ID:rohsaini，项目名称:mkunity，代码行数:22，代码来源:l3_1tr6.c

示例19: setup_telespci

int __init
setup_telespci(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

#ifdef __BIG_ENDIAN
#error "not running on big endian machines now"
#endif
	strcpy(tmp, telespci_revision);
	printk(KERN_INFO "HiSax: Teles/PCI driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_TELESPCI)
		return (0);
#if CONFIG_PCI
	if (!pci_present()) {
		printk(KERN_ERR "TelesPCI: no PCI bus present\n");
		return(0);
	}
	if ((dev_tel = pci_find_device (PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36120, dev_tel))) {
		if (pci_enable_device(dev_tel))
			return(0);
		cs->irq = dev_tel->irq;
		if (!cs->irq) {
			printk(KERN_WARNING "Teles: No IRQ for PCI card found\n");
			return(0);
		}
		cs->hw.teles0.membase = (u_long) ioremap(pci_resource_start(dev_tel, 0),
			PAGE_SIZE);
		printk(KERN_INFO "Found: Zoran, base-address: 0x%lx, irq: 0x%x\n",
			pci_resource_start(dev_tel, 0), dev_tel->irq);
	} else {
		printk(KERN_WARNING "TelesPCI: No PCI card found\n");
		return(0);
	}
#else
	printk(KERN_WARNING "HiSax: Teles/PCI and NO_PCI_BIOS\n");
	printk(KERN_WARNING "HiSax: Teles/PCI unable to config\n");
	return (0);
#endif /* CONFIG_PCI */

	/* Initialize Zoran PCI controller */
	writel(0x00000000, cs->hw.teles0.membase + 0x28);
	writel(0x01000000, cs->hw.teles0.membase + 0x28);
	writel(0x01000000, cs->hw.teles0.membase + 0x28);
	writel(0x7BFFFFFF, cs->hw.teles0.membase + 0x2C);
	writel(0x70000000, cs->hw.teles0.membase + 0x3C);
	writel(0x61000000, cs->hw.teles0.membase + 0x40);
	/* writel(0x00800000, cs->hw.teles0.membase + 0x200); */

	printk(KERN_INFO
	       "HiSax: %s config irq:%d mem:%lx\n",
	       CardType[cs->typ], cs->irq,
	       cs->hw.teles0.membase);

	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &TelesPCI_card_msg;
	cs->irq_func = &telespci_interrupt;
	cs->irq_flags |= SA_SHIRQ;
	ISACVersion(cs, "TelesPCI:");
	if (HscxVersion(cs, "TelesPCI:")) {
		printk(KERN_WARNING
		 "TelesPCI: wrong HSCX versions check IO/MEM addresses\n");
		release_io_telespci(cs);
		return (0);
	}
	return (1);
}

开发者ID:JBTech，项目名称:ralink_rt5350，代码行数:73，代码来源:telespci.c

示例20: setup_teles3

int __devinit
setup_teles3(struct IsdnCard *card)
{
	u_char val;
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, teles3_revision);
	printk(KERN_INFO "HiSax: Teles IO driver Rev. %s\n", HiSax_getrev(tmp));
	if ((cs->typ != ISDN_CTYPE_16_3) && (cs->typ != ISDN_CTYPE_PNP)
	    && (cs->typ != ISDN_CTYPE_TELESPCMCIA) && (cs->typ != ISDN_CTYPE_COMPAQ_ISA))
		return (0);

#ifdef __ISAPNP__
	if (!card->para[1] && isapnp_present()) {
		struct pnp_dev *pnp_d;
		while(ipid->card_vendor) {
			if ((pnp_c = pnp_find_card(ipid->card_vendor,
				ipid->card_device, pnp_c))) {
				pnp_d = NULL;
				if ((pnp_d = pnp_find_dev(pnp_c,
					ipid->vendor, ipid->function, pnp_d))) {
					int err;

					printk(KERN_INFO "HiSax: %s detected\n",
						(char *)ipid->driver_data);
					pnp_disable_dev(pnp_d);
					err = pnp_activate_dev(pnp_d);
					if (err<0) {
						printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
							__FUNCTION__, err);
						return(0);
					}
					card->para[3] = pnp_port_start(pnp_d, 2);
					card->para[2] = pnp_port_start(pnp_d, 1);
					card->para[1] = pnp_port_start(pnp_d, 0);
					card->para[0] = pnp_irq(pnp_d, 0);
					if (!card->para[0] || !card->para[1] || !card->para[2]) {
						printk(KERN_ERR "Teles PnP:some resources are missing %ld/%lx/%lx\n",
							card->para[0], card->para[1], card->para[2]);
						pnp_disable_dev(pnp_d);
						return(0);
					}
					break;
				} else {
					printk(KERN_ERR "Teles PnP: PnP error card found, no device\n");
				}
			}
			ipid++;
			pnp_c = NULL;
		} 
		if (!ipid->card_vendor) {
			printk(KERN_INFO "Teles PnP: no ISAPnP card found\n");
			return(0);
		}
	}
#endif
	if (cs->typ == ISDN_CTYPE_16_3) {
		cs->hw.teles3.cfg_reg = card->para[1];
		switch (cs->hw.teles3.cfg_reg) {
			case 0x180:
			case 0x280:
			case 0x380:
				cs->hw.teles3.cfg_reg |= 0xc00;
				break;
		}
		cs->hw.teles3.isac = cs->hw.teles3.cfg_reg - 0x420;
		cs->hw.teles3.hscx[0] = cs->hw.teles3.cfg_reg - 0xc20;
		cs->hw.teles3.hscx[1] = cs->hw.teles3.cfg_reg - 0x820;
	} else if (cs->typ == ISDN_CTYPE_TELESPCMCIA) {
		cs->hw.teles3.cfg_reg = 0;
		cs->hw.teles3.hscx[0] = card->para[1] - 0x20;
		cs->hw.teles3.hscx[1] = card->para[1];
		cs->hw.teles3.isac = card->para[1] + 0x20;
	} else if (cs->typ == ISDN_CTYPE_COMPAQ_ISA) {
		cs->hw.teles3.cfg_reg = card->para[3];
		cs->hw.teles3.isac = card->para[2] - 32;
		cs->hw.teles3.hscx[0] = card->para[1] - 32;
		cs->hw.teles3.hscx[1] = card->para[1];
	} else {	/* PNP */
		cs->hw.teles3.cfg_reg = 0;
		cs->hw.teles3.isac = card->para[1] - 32;
		cs->hw.teles3.hscx[0] = card->para[2] - 32;
		cs->hw.teles3.hscx[1] = card->para[2];
	}
	cs->irq = card->para[0];
	cs->hw.teles3.isacfifo = cs->hw.teles3.isac + 0x3e;
	cs->hw.teles3.hscxfifo[0] = cs->hw.teles3.hscx[0] + 0x3e;
	cs->hw.teles3.hscxfifo[1] = cs->hw.teles3.hscx[1] + 0x3e;
	if (cs->typ == ISDN_CTYPE_TELESPCMCIA) {
		if (!request_region(cs->hw.teles3.hscx[1], 96, "HiSax Teles PCMCIA")) {
			printk(KERN_WARNING
			       "HiSax: %s ports %x-%x already in use\n",
			       CardType[cs->typ],
			       cs->hw.teles3.hscx[1],
			       cs->hw.teles3.hscx[1] + 96);
			return (0);
		}
	} else {
		if (cs->hw.teles3.cfg_reg) {
//.........这里部分代码省略.........

开发者ID:BackupTheBerlios，项目名称:tew632-brp-svn，代码行数:101，代码来源:teles3.c

注：本文中的HiSax_getrev函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ Hide函数代码示例发布时间：2022-05-30

C++ HexDump函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18264|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9677|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8177|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8548|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8456|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9388|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8427|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7862|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8411|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ HiSax_getrev函数代码示例

示例1: setup_enternow_pci

示例2: setup_bkm_a4t

示例3: setup_sportster

示例4: setup_saphir

示例5: setup_asuscom

示例6: setup_avm_a1_pcmcia

示例7: setup_hfcs

示例8: __initfunc

示例9: setup_mic

示例10: HiSaxVersion

示例11: setup_saphir

示例12: setup_t163c

示例13: setstack_1tr6

示例14: setup_netjet_s

示例15: setup_diva

示例16: setup_elsa

示例17: setup_netjet_u

示例18: setstack_1tr6

示例19: setup_telespci

示例20: setup_teles3

请发表评论

全部评论

上一篇：

下一篇：

dphi-official/Machine_Learning_Bootcamp

tianli/matlab_offscreen: Matlab offscree

win7系统注册表编辑器打开的操作方法

これがマストドンだ！ 使い方からインスタ

芙蓉王（硬领航）多少钱一包？

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053

これがマストドンだ！使い方からインスタ