C++ HiiAddPackages函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中HiiAddPackages函数的典型用法代码示例。如果您正苦于以下问题：C++ HiiAddPackages函数的具体用法？C++ HiiAddPackages怎么用？C++ HiiAddPackages使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了HiiAddPackages函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ShellNetwork1CommandsLibConstructor

/**
  Constructor for the Shell Network1 Commands library.

  Install the handlers for Network1 UEFI Shell 2.0 profile commands.

  @param ImageHandle            The image handle of the process.
  @param SystemTable            The EFI System Table pointer.

  @retval EFI_SUCCESS           The shell command handlers were installed sucessfully.
  @retval EFI_UNSUPPORTED       The shell level required was not found.
**/
EFI_STATUS
EFIAPI
ShellNetwork1CommandsLibConstructor (
  IN EFI_HANDLE        ImageHandle,
  IN EFI_SYSTEM_TABLE  *SystemTable
  )
{
  gShellNetwork1HiiHandle = NULL;

  //
  // check our bit of the profiles mask
  //
  if ((PcdGet8(PcdShellProfileMask) & BIT3) == 0) {
    return (EFI_SUCCESS);
  }

  gShellNetwork1HiiHandle = HiiAddPackages (&gShellNetwork1HiiGuid, gImageHandle, UefiShellNetwork1CommandsLibStrings, NULL);
  if (gShellNetwork1HiiHandle == NULL) {
    return (EFI_DEVICE_ERROR);
  }
  //
  // install our shell command handlers
  //
  ShellCommandRegisterCommandName(L"ping",    ShellCommandRunPing     , ShellCommandGetManFileNameNetwork1, 0, L"network1", TRUE , gShellNetwork1HiiHandle, STRING_TOKEN(STR_GET_HELP_PING));
  ShellCommandRegisterCommandName(L"ifconfig",ShellCommandRunIfconfig , ShellCommandGetManFileNameNetwork1, 0, L"network1", TRUE , gShellNetwork1HiiHandle, STRING_TOKEN(STR_GET_HELP_IFCONFIG));

  return (EFI_SUCCESS);
}

开发者ID:etiago，项目名称:vbox，代码行数:39，代码来源:UefiShellNetwork1CommandsLib.c

示例2: ShellDynCmdRunAxfInstall

EFI_STATUS
ShellDynCmdRunAxfInstall (
  IN EFI_HANDLE             ImageHandle
  )
{
  EFI_STATUS Status;

  // Register our shell command
  Status = gBS->InstallMultipleProtocolInterfaces (&ImageHandle,
                 &gEfiShellDynamicCommandProtocolGuid,
                 &mShellDynCmdProtocolRunAxf,
                 NULL);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  // Load the manual page for our command
  //
  // 3rd parameter 'HII strings array' must be name of .uni strings file
  // followed by 'Strings', e.g. mycommands.uni must be specified as
  // 'mycommandsStrings' because the build Autogen process defines this as a
  // string array for the strings in your .uni file.  Examine your Build folder
  // under your package's DEBUG folder and you will find it defined in a
  // xxxStrDefs.h file.
  //
  gRunAxfHiiHandle = HiiAddPackages (&gRunAxfHiiGuid, ImageHandle,
                                     ArmShellCmdRunAxfStrings, NULL);
  if (gRunAxfHiiHandle == NULL) {
    return EFI_UNSUPPORTED;
  }

  return EFI_SUCCESS;
}

开发者ID:AbnerChang，项目名称:edk2-staging，代码行数:33，代码来源:ArmShellCmdRunAxf.c

示例3: ShellInstall1CommandsLibConstructor

/**
  Constructor for the Shell Level 1 Commands library.

  Install the handlers for level 1 UEFI Shell 2.0 commands.

  @param ImageHandle    the image handle of the process
  @param SystemTable    the EFI System Table pointer

  @retval EFI_SUCCESS        the shell command handlers were installed sucessfully
  @retval EFI_UNSUPPORTED    the shell level required was not found.
**/
EFI_STATUS
EFIAPI
ShellInstall1CommandsLibConstructor (
  IN EFI_HANDLE        ImageHandle,
  IN EFI_SYSTEM_TABLE  *SystemTable
  )
{
  //
  // check our bit of the profiles mask
  //
  if ((PcdGet8(PcdShellProfileMask) & BIT2) == 0) {
    return (EFI_SUCCESS);
  }

  gShellInstall1HiiHandle = HiiAddPackages (&gShellInstall1HiiGuid, gImageHandle, UefiShellInstall1CommandsLibStrings, NULL);
  if (gShellInstall1HiiHandle == NULL) {
    return (EFI_DEVICE_ERROR);
  }

  //
  // install our shell command handlers that are always installed
  //
  ShellCommandRegisterCommandName(L"bcfg", ShellCommandRunBcfgInstall , ShellCommandGetManFileNameInstall1, 0, L"Install", FALSE, gShellInstall1HiiHandle, STRING_TOKEN(STR_GET_HELP_BCFG));

  return (EFI_SUCCESS);
}

开发者ID:AshleyDeSimone，项目名称:edk2，代码行数:37，代码来源:UefiShellInstall1CommandsLib.c

示例4: LegacyBootMaintUiLibConstructor

/**

  Install Boot Manager Menu driver.

  @param ImageHandle     The image handle.
  @param SystemTable     The system table.

  @retval  EFI_SUCEESS  Install Boot manager menu success.
  @retval  Other        Return error status.

**/
EFI_STATUS
EFIAPI
LegacyBootMaintUiLibConstructor (
  IN EFI_HANDLE                            ImageHandle,
  IN EFI_SYSTEM_TABLE                      *SystemTable
  )
{
  EFI_STATUS                        Status;
  EFI_LEGACY_BIOS_PROTOCOL          *LegacyBios;
  LEGACY_BOOT_OPTION_CALLBACK_DATA  *LegacyBootOptionData;

  Status = gBS->LocateProtocol (&gEfiLegacyBiosProtocolGuid, NULL, (VOID **) &LegacyBios);
  if (!EFI_ERROR (Status)) {
    //
    // Create LegacyBootOptionData structures for Driver Callback
    //
    LegacyBootOptionData = AllocateZeroPool (sizeof (LEGACY_BOOT_OPTION_CALLBACK_DATA));
    ASSERT (LegacyBootOptionData != NULL);
    
    LegacyBootOptionData->MaintainMapData = AllocateZeroPool (sizeof (LEGACY_BOOT_MAINTAIN_DATA));
    ASSERT (LegacyBootOptionData->MaintainMapData != NULL);

    LegacyBootOptionData->ConfigAccess.ExtractConfig = LegacyBootOptionExtractConfig;
    LegacyBootOptionData->ConfigAccess.RouteConfig   = LegacyBootOptionRouteConfig;
    LegacyBootOptionData->ConfigAccess.Callback      = LegacyBootOptionCallback;

    //
    // Install Device Path Protocol and Config Access protocol to driver handle
    //
    Status = gBS->InstallMultipleProtocolInterfaces (
                    &LegacyBootOptionData->DriverHandle,
                    &gEfiDevicePathProtocolGuid,
                    &mLegacyBootOptionHiiVendorDevicePath,
                    &gEfiHiiConfigAccessProtocolGuid,
                    &LegacyBootOptionData->ConfigAccess,
                    NULL
                    );
    ASSERT_EFI_ERROR (Status);

    //
    // Publish our HII data
    //
    LegacyBootOptionData->HiiHandle = HiiAddPackages (
                                      &mLegacyBootOptionGuid,
                                      LegacyBootOptionData->DriverHandle,
                                      LegacyBootMaintUiVfrBin,
                                      LegacyBootMaintUiLibStrings,
                                      NULL
                                      );
    ASSERT (LegacyBootOptionData->HiiHandle != NULL);

    mLegacyBootOptionPrivate = LegacyBootOptionData;

    GetLegacyOptions ();

    GetLegacyOptionsOrder();
  }

  return EFI_SUCCESS;
}

开发者ID:FrozenXZeus，项目名称:edk2，代码行数:71，代码来源:LegacyBootMaintUi.c

示例5: InstallHiiPages

STATIC
EFI_STATUS
InstallHiiPages (
  VOID
  )
{
  EFI_STATUS                      Status;
  EFI_HII_HANDLE                  HiiHandle;
  EFI_HANDLE                      DriverHandle;

  DriverHandle = NULL;
  Status = gBS->InstallMultipleProtocolInterfaces (&DriverHandle,
                  &gEfiDevicePathProtocolGuid,
                  &m96BoardsDxeVendorDevicePath,
                  NULL);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  HiiHandle = HiiAddPackages (&g96BoardsFormsetGuid,
                              DriverHandle,
                              LsConnectorDxeStrings,
                              LsConnectorHiiBin,
                              NULL);

  if (HiiHandle == NULL) {
    gBS->UninstallMultipleProtocolInterfaces (DriverHandle,
           &gEfiDevicePathProtocolGuid,
           &m96BoardsDxeVendorDevicePath,
           NULL);
    return EFI_OUT_OF_RESOURCES;
  }
  return EFI_SUCCESS;
}

开发者ID:mangguo321，项目名称:edk2-platforms，代码行数:34，代码来源:LsConnectorDxe.c

示例6: ShellLevel1CommandsLibConstructor

/**
  Constructor for the Shell Level 1 Commands library.

  Install the handlers for level 1 UEFI Shell 2.0 commands.

  @param ImageHandle    the image handle of the process
  @param SystemTable    the EFI System Table pointer

  @retval EFI_SUCCESS        the shell command handlers were installed sucessfully
  @retval EFI_UNSUPPORTED    the shell level required was not found.
**/
EFI_STATUS
EFIAPI
ShellLevel1CommandsLibConstructor (
  IN EFI_HANDLE        ImageHandle,
  IN EFI_SYSTEM_TABLE  *SystemTable
  )
{
  //
  // if shell level is less than 2 do nothing
  //
  if (PcdGet8(PcdShellSupportLevel) < 1) {
    return (EFI_SUCCESS);
  }

  gShellLevel1HiiHandle = HiiAddPackages (&gShellLevel1HiiGuid, gImageHandle, UefiShellLevel1CommandsLibStrings, NULL);
  if (gShellLevel1HiiHandle == NULL) {
    return (EFI_DEVICE_ERROR);
  }

  //
  // install our shell command handlers that are always installed
  //
  ShellCommandRegisterCommandName(L"stall",  ShellCommandRunStall   , ShellCommandGetManFileNameLevel1, 1, L"", FALSE, gShellLevel1HiiHandle, (EFI_STRING_ID)(PcdGet8(PcdShellSupportLevel) < 3 ? 0 : STRING_TOKEN(STR_GET_HELP_STALL) ));
  ShellCommandRegisterCommandName(L"for",    ShellCommandRunFor     , ShellCommandGetManFileNameLevel1, 1, L"", FALSE, gShellLevel1HiiHandle, (EFI_STRING_ID)(PcdGet8(PcdShellSupportLevel) < 3 ? 0 : STRING_TOKEN(STR_GET_HELP_FOR)   ));
  ShellCommandRegisterCommandName(L"goto",   ShellCommandRunGoto    , ShellCommandGetManFileNameLevel1, 1, L"", FALSE, gShellLevel1HiiHandle, (EFI_STRING_ID)(PcdGet8(PcdShellSupportLevel) < 3 ? 0 : STRING_TOKEN(STR_GET_HELP_GOTO)  ));
  ShellCommandRegisterCommandName(L"if",     ShellCommandRunIf      , ShellCommandGetManFileNameLevel1, 1, L"", FALSE, gShellLevel1HiiHandle, (EFI_STRING_ID)(PcdGet8(PcdShellSupportLevel) < 3 ? 0 : STRING_TOKEN(STR_GET_HELP_IF)    ));
  ShellCommandRegisterCommandName(L"shift",  ShellCommandRunShift   , ShellCommandGetManFileNameLevel1, 1, L"", FALSE, gShellLevel1HiiHandle, (EFI_STRING_ID)(PcdGet8(PcdShellSupportLevel) < 3 ? 0 : STRING_TOKEN(STR_GET_HELP_SHIFT) ));
  ShellCommandRegisterCommandName(L"exit",   ShellCommandRunExit    , ShellCommandGetManFileNameLevel1, 1, L"", TRUE , gShellLevel1HiiHandle, (EFI_STRING_ID)(PcdGet8(PcdShellSupportLevel) < 3 ? 0 : STRING_TOKEN(STR_GET_HELP_EXIT)  ));
  ShellCommandRegisterCommandName(L"else",   ShellCommandRunElse    , ShellCommandGetManFileNameLevel1, 1, L"", FALSE, gShellLevel1HiiHandle, (EFI_STRING_ID)(PcdGet8(PcdShellSupportLevel) < 3 ? 0 : STRING_TOKEN(STR_GET_HELP_ELSE)  ));
  ShellCommandRegisterCommandName(L"endif",  ShellCommandRunEndIf   , ShellCommandGetManFileNameLevel1, 1, L"", FALSE, gShellLevel1HiiHandle, (EFI_STRING_ID)(PcdGet8(PcdShellSupportLevel) < 3 ? 0 : STRING_TOKEN(STR_GET_HELP_ENDIF) ));
  ShellCommandRegisterCommandName(L"endfor", ShellCommandRunEndFor  , ShellCommandGetManFileNameLevel1, 1, L"", FALSE, gShellLevel1HiiHandle, (EFI_STRING_ID)(PcdGet8(PcdShellSupportLevel) < 3 ? 0 : STRING_TOKEN(STR_GET_HELP_ENDFOR)));

  return (EFI_SUCCESS);
}

开发者ID:etiago，项目名称:vbox，代码行数:45，代码来源:UefiShellLevel1CommandsLib.c

示例7: ShellTftpCommandLibConstructor

/**
  Constructor for the Shell Tftp Command library.

  Install the handlers for Tftp UEFI Shell command.

  @param ImageHandle            The image handle of the process.
  @param SystemTable            The EFI System Table pointer.

  @retval EFI_SUCCESS           The Shell command handlers were installed sucessfully.
  @retval EFI_UNSUPPORTED       The Shell level required was not found.
**/
EFI_STATUS
EFIAPI
ShellTftpCommandLibConstructor (
  IN EFI_HANDLE        ImageHandle,
  IN EFI_SYSTEM_TABLE  *SystemTable
  )
{
  gShellTftpHiiHandle = NULL;

  //
  // check our bit of the profiles mask
  //
  if ((PcdGet8 (PcdShellProfileMask) & BIT3) == 0) {
    return EFI_SUCCESS;
  }

  gShellTftpHiiHandle = HiiAddPackages (
                          &gShellTftpHiiGuid, gImageHandle,
                          UefiShellTftpCommandLibStrings, NULL
                          );
  if (gShellTftpHiiHandle == NULL) {
    return EFI_DEVICE_ERROR;
  }
  //
  // Install our Shell command handler
  //
  ShellCommandRegisterCommandName (
     L"tftp", ShellCommandRunTftp, ShellCommandGetManFileNameTftp, 0,
     L"tftp", TRUE , gShellTftpHiiHandle, STRING_TOKEN (STR_GET_HELP_TFTP)
     );

  return EFI_SUCCESS;
}

开发者ID:OznOg，项目名称:edk2，代码行数:44，代码来源:UefiShellTftpCommandLib.c

示例8: ASSERT

/**
  The constructor function register UNI strings into imageHandle.
  
  It will ASSERT() if that operation fails and it will always return EFI_SUCCESS. 

  @param  ImageHandle   The firmware allocated handle for the EFI image.
  @param  SystemTable   A pointer to the EFI System Table.
  
  @retval EFI_SUCCESS   The constructor successfully added string package.
  @retval Other value   The constructor can't add string package.

**/
EFI_STATUS
EFIAPI
TcgPhysicalPresenceLibConstructor (
  IN EFI_HANDLE        ImageHandle,
  IN EFI_SYSTEM_TABLE  *SystemTable
  )
{
  mPpStringPackHandle = HiiAddPackages (&gEfiPhysicalPresenceGuid, ImageHandle, DxeTcgPhysicalPresenceLibStrings, NULL);
  ASSERT (mPpStringPackHandle != NULL);

  return EFI_SUCCESS;
}

开发者ID:jian-tian，项目名称:UEFI，代码行数:24，代码来源:DxeTcgPhysicalPresenceLib.c

示例9: GpioE6xxGetHiiHandle

VOID
GpioE6xxGetHiiHandle (
  VOID
  )
{
  if ( NULL == gGpioE6xxHiiHandle ) {
    gGpioE6xxHiiHandle = HiiAddPackages ( &mGpioE6xxGuid,
                                          gImageHandle,
                                          STRING_ARRAY_NAME,
                                          NULL );
  }
}

开发者ID:RafaelRMachado，项目名称:MinnowBoard，代码行数:12，代码来源:GpioE6xxCommon.c

示例10: InitializeFrontPage

/**
  Initialize HII information for the FrontPage


  @retval  EFI_SUCCESS        The operation is successful.
  @retval  EFI_DEVICE_ERROR   If the dynamic opcode creation failed.

**/
EFI_STATUS
InitializeFrontPage (
  VOID
  )
{
  EFI_STATUS                  Status;

  //
  // Locate Hii relative protocols
  //
  Status = gBS->LocateProtocol (&gEfiFormBrowser2ProtocolGuid, NULL, (VOID **) &gFormBrowser2);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  //
  // Install Device Path Protocol and Config Access protocol to driver handle
  //
  gFrontPagePrivate.DriverHandle = NULL;
  Status = gBS->InstallMultipleProtocolInterfaces (
                  &gFrontPagePrivate.DriverHandle,
                  &gEfiDevicePathProtocolGuid,
                  &mFrontPageHiiVendorDevicePath,
                  &gEfiHiiConfigAccessProtocolGuid,
                  &gFrontPagePrivate.ConfigAccess,
                  NULL
                  );
  ASSERT_EFI_ERROR (Status);

  //
  // Publish our HII data
  //
  gFrontPagePrivate.HiiHandle = HiiAddPackages (
                                  &mFrontPageGuid,
                                  gFrontPagePrivate.DriverHandle,
                                  FrontPageVfrBin,
                                  UiAppStrings,
                                  NULL
                                  );
  ASSERT (gFrontPagePrivate.HiiHandle != NULL);

  //
  //Updata Front Page strings
  //
  UpdateFrontPageStrings ();

  //
  // Initialize laguage options
  //
  InitializeLanguage ();

  return Status;
}

开发者ID:NicholasFengTW，项目名称:edk2，代码行数:61，代码来源:FrontPage.c

示例11: InstallTrEEConfigForm

/**
  This function publish the TREE configuration Form for TPM device.

  @param[in, out]  PrivateData   Points to TREE configuration private data.

  @retval EFI_SUCCESS            HII Form is installed for this network device.
  @retval EFI_OUT_OF_RESOURCES   Not enough resource for HII Form installation.
  @retval Others                 Other errors as indicated.

**/
EFI_STATUS
InstallTrEEConfigForm (
  IN OUT TREE_CONFIG_PRIVATE_DATA  *PrivateData
  )
{
  EFI_STATUS                      Status;
  EFI_HII_HANDLE                  HiiHandle;
  EFI_HANDLE                      DriverHandle;
  EFI_HII_CONFIG_ACCESS_PROTOCOL  *ConfigAccess;

  DriverHandle = NULL;
  ConfigAccess = &PrivateData->ConfigAccess;
  Status = gBS->InstallMultipleProtocolInterfaces (
                  &DriverHandle,
                  &gEfiDevicePathProtocolGuid,
                  &mTrEEHiiVendorDevicePath,
                  &gEfiHiiConfigAccessProtocolGuid,
                  ConfigAccess,
                  NULL
                  );
  if (EFI_ERROR (Status)) {
    return Status;
  }

  PrivateData->DriverHandle = DriverHandle;

  //
  // Publish the HII package list
  //
  HiiHandle = HiiAddPackages (
                &gTrEEConfigFormSetGuid,
                DriverHandle,
                TrEEConfigDxeStrings,
                TrEEConfigBin,
                NULL
                );
  if (HiiHandle == NULL) {
    gBS->UninstallMultipleProtocolInterfaces (
           DriverHandle,
           &gEfiDevicePathProtocolGuid,
           &mTrEEHiiVendorDevicePath,
           &gEfiHiiConfigAccessProtocolGuid,
           ConfigAccess,
           NULL
           );  

    return EFI_OUT_OF_RESOURCES;
  }
  
  PrivateData->HiiHandle = HiiHandle;

  return EFI_SUCCESS;  
}

开发者ID:B-Rich，项目名称:edk2，代码行数:63，代码来源:TrEEConfigImpl.c

示例12: GetHiiHandle

VOID
GetHiiHandle (
  VOID
  )
{
  if ( NULL == mHiiHandle ) {
    mHiiHandle = HiiAddPackages ( &mAppGuid,
                                  gImageHandle,
                                  STRING_ARRAY_NAME,
                                  NULL );
  }
}

开发者ID:RafaelRMachado，项目名称:MinnowBoard，代码行数:12，代码来源:Var.c

示例13: ExportFonts

/**
  Routine to export glyphs to the HII database.  This is in addition to whatever is defined in the Graphics Console driver.

**/
EFI_HII_HANDLE
ExportFonts (
  VOID
  )
{
  return HiiAddPackages (
           &mFontPackageGuid,
           gImageHandle,
           &mFontBin,
           NULL
           );
}

开发者ID:M1cha，项目名称:edk2，代码行数:16，代码来源:Language.c

示例14: OemGetPackages

EFI_HII_HANDLE
EFIAPI
OemGetPackages (
  )
{
    return HiiAddPackages (
                            &gEfiCallerIdGuid,
                            NULL,
                            OemMiscLib2PStrings,
                            NULL,
                            NULL
                            );
}

开发者ID:tianocore，项目名称:edk2-platforms，代码行数:13，代码来源:BoardFeature2PHi1610.c

示例15: InitializeStringSupport

/**
  Initialize HII global accessor for string support.

**/
VOID
InitializeStringSupport (
  VOID
  )
{
  gStringPackHandle = HiiAddPackages (
                         &mBdsStringPackGuid,
                         gImageHandle,
                         BdsDxeStrings,
                         NULL
                         );
  ASSERT (gStringPackHandle != NULL);
}

开发者ID:bhanug，项目名称:virtualbox，代码行数:17，代码来源:String.c

示例16: CustomizedDisplayLibConstructor

/**
  Constructor of Customized Display Library Instance.

  @param  ImageHandle   The firmware allocated handle for the EFI image.
  @param  SystemTable   A pointer to the EFI System Table.

  @retval EFI_SUCCESS   The constructor always returns EFI_SUCCESS.

**/
EFI_STATUS
EFIAPI
CustomizedDisplayLibConstructor (
  IN      EFI_HANDLE                ImageHandle,
  IN      EFI_SYSTEM_TABLE          *SystemTable
  )
{
  mCDLStringPackHandle = HiiAddPackages (&gCustomizedDisplayLibGuid, ImageHandle, CustomizedDisplayLibStrings, NULL);
  ASSERT (mCDLStringPackHandle != NULL);

  InitializeLibStrings();

  return EFI_SUCCESS;
}

开发者ID:wensunshine，项目名称:VisualUefi，代码行数:23，代码来源:CustomizedDisplayLib.c

示例17: SmbiosGenEntrypoint

EFI_STATUS
EFIAPI
SmbiosGenEntrypoint (
  IN EFI_HANDLE           ImageHandle,
  IN EFI_SYSTEM_TABLE     *SystemTable
  )
{
  EFI_STATUS              Status;
  VOID                    *Smbios;

  Smbios = GetSmbiosTablesFromHob ();
  if (Smbios == NULL) {
    return EFI_NOT_FOUND;
  }

  Status = gBS->LocateProtocol (
                  &gEfiSmbiosProtocolGuid,
                  NULL,
                  (VOID**)&gSmbios
                  );
  if (EFI_ERROR (Status)) {
    return Status;
  }

  Status = gBS->LocateProtocol (
                  &gEfiHiiDatabaseProtocolGuid,
                  NULL,
                  (VOID**)&gHiiDatabase
                  );

  if (EFI_ERROR (Status)) {
    return Status;
  }
  
  gStringHandle = HiiAddPackages (
                    &gEfiCallerIdGuid,
                    NULL,
                    SmbiosGenDxeStrings,
                    NULL
                    );
  ASSERT (gStringHandle != NULL);

  InstallMiscSmbios      (Smbios);
  InstallBaseBoardSmbios (Smbios);
  InstallProcessorSmbios (Smbios);
  InstallMemorySmbios    (Smbios);
  InstallCacheSmbios     (Smbios);

  return EFI_SUCCESS;
}

开发者ID:queer1，项目名称:bareBoot，代码行数:50，代码来源:SmbiosGen.c

示例18: UefiShellDebug1CommandsLibConstructor

/**
  Constructor for the Shell Debug1 Commands library.

  @param ImageHandle    the image handle of the process
  @param SystemTable    the EFI System Table pointer

  @retval EFI_SUCCESS        the shell command handlers were installed sucessfully
  @retval EFI_UNSUPPORTED    the shell level required was not found.
**/
EFI_STATUS
EFIAPI
UefiShellDebug1CommandsLibConstructor (
  IN EFI_HANDLE        ImageHandle,
  IN EFI_SYSTEM_TABLE  *SystemTable
  )
{
  //
  // check our bit of the profiles mask
  //
  if ((PcdGet8(PcdShellProfileMask) & BIT1) == 0) {
    return (EFI_SUCCESS);
  }

  //
  // install the HII stuff.
  //
  gShellDebug1HiiHandle = HiiAddPackages (&gShellDebug1HiiGuid, gImageHandle, UefiShellDebug1CommandsLibStrings, NULL);
  if (gShellDebug1HiiHandle == NULL) {
    return (EFI_DEVICE_ERROR);
  }

  //
  // install our shell command handlers that are always installed
  //
  ShellCommandRegisterCommandName(L"setsize",       ShellCommandRunSetSize            , ShellCommandGetManFileNameDebug1, 0, L"Debug1", TRUE, gShellDebug1HiiHandle, STRING_TOKEN(STR_GET_HELP_SETSIZE)      );
  ShellCommandRegisterCommandName(L"comp",          ShellCommandRunComp               , ShellCommandGetManFileNameDebug1, 0, L"Debug1", TRUE, gShellDebug1HiiHandle, STRING_TOKEN(STR_GET_HELP_COMP)         );
  ShellCommandRegisterCommandName(L"mode",          ShellCommandRunMode               , ShellCommandGetManFileNameDebug1, 0, L"Debug1", TRUE, gShellDebug1HiiHandle, STRING_TOKEN(STR_GET_HELP_MODE)         );
  ShellCommandRegisterCommandName(L"memmap",        ShellCommandRunMemMap             , ShellCommandGetManFileNameDebug1, 0, L"Debug1", TRUE, gShellDebug1HiiHandle, STRING_TOKEN(STR_GET_HELP_MEMMAP)       );
  ShellCommandRegisterCommandName(L"eficompress",   ShellCommandRunEfiCompress        , ShellCommandGetManFileNameDebug1, 0, L"Debug1", TRUE, gShellDebug1HiiHandle, STRING_TOKEN(STR_GET_HELP_EFICOMPRESS)  );
  ShellCommandRegisterCommandName(L"efidecompress", ShellCommandRunEfiDecompress      , ShellCommandGetManFileNameDebug1, 0, L"Debug1", TRUE, gShellDebug1HiiHandle, STRING_TOKEN(STR_GET_HELP_EFIDCOMPRESS) );
  ShellCommandRegisterCommandName(L"dmem",          ShellCommandRunDmem               , ShellCommandGetManFileNameDebug1, 0, L"Debug1", TRUE, gShellDebug1HiiHandle, STRING_TOKEN(STR_GET_HELP_DMEM)         );
  ShellCommandRegisterCommandName(L"loadpcirom",    ShellCommandRunLoadPciRom         , ShellCommandGetManFileNameDebug1, 0, L"Debug1", TRUE, gShellDebug1HiiHandle, STRING_TOKEN(STR_GET_HELP_LOAD_PCI_ROM) );
  ShellCommandRegisterCommandName(L"mm",            ShellCommandRunMm                 , ShellCommandGetManFileNameDebug1, 0, L"Debug1", TRUE, gShellDebug1HiiHandle, STRING_TOKEN(STR_GET_HELP_MM)           );
  ShellCommandRegisterCommandName(L"setvar",        ShellCommandRunSetVar             , ShellCommandGetManFileNameDebug1, 0, L"Debug1", TRUE, gShellDebug1HiiHandle, STRING_TOKEN(STR_GET_HELP_SETVAR)       );
  ShellCommandRegisterCommandName(L"sermode",       ShellCommandRunSerMode            , ShellCommandGetManFileNameDebug1, 0, L"Debug1", TRUE, gShellDebug1HiiHandle, STRING_TOKEN(STR_GET_HELP_SERMODE)      );
  ShellCommandRegisterCommandName(L"pci",           ShellCommandRunPci                , ShellCommandGetManFileNameDebug1, 0, L"Debug1", TRUE, gShellDebug1HiiHandle, STRING_TOKEN(STR_GET_HELP_PCI)          );
  ShellCommandRegisterCommandName(L"smbiosview",    ShellCommandRunSmbiosView         , ShellCommandGetManFileNameDebug1, 0, L"Debug1", TRUE, gShellDebug1HiiHandle, STRING_TOKEN(STR_GET_HELP_SMBIOSVIEW)   );
  ShellCommandRegisterCommandName(L"dmpstore",      ShellCommandRunDmpStore           , ShellCommandGetManFileNameDebug1, 0, L"Debug1", TRUE, gShellDebug1HiiHandle, STRING_TOKEN(STR_GET_HELP_DMPSTORE)     );
  ShellCommandRegisterCommandName(L"dblk",          ShellCommandRunDblk               , ShellCommandGetManFileNameDebug1, 0, L"Debug1", TRUE, gShellDebug1HiiHandle, STRING_TOKEN(STR_GET_HELP_DBLK)         );
  ShellCommandRegisterCommandName(L"edit",          ShellCommandRunEdit               , ShellCommandGetManFileNameDebug1, 0, L"Debug1", TRUE, gShellDebug1HiiHandle, STRING_TOKEN(STR_GET_HELP_EDIT)         );
  ShellCommandRegisterCommandName(L"hexedit",       ShellCommandRunHexEdit            , ShellCommandGetManFileNameDebug1, 0, L"Debug1", TRUE, gShellDebug1HiiHandle, STRING_TOKEN(STR_GET_HELP_HEXEDIT)      );

  ShellCommandRegisterAlias(L"dmem", L"mem");

  BcfgLibraryRegisterBcfgCommand(ImageHandle, SystemTable, L"Debug1");

  return (EFI_SUCCESS);
}

开发者ID:jeppeter，项目名称:vbox，代码行数:58，代码来源:UefiShellDebug1CommandsLib.c

示例19: ExportFonts

/**
  Routine to export glyphs to the HII database.  This is in addition to whatever is defined in the Graphics Console driver.

**/
VOID
ExportFonts (
  VOID
  )
{
  EFI_HII_HANDLE               HiiHandle;

  HiiHandle = HiiAddPackages (
                &mFontPackageGuid,
                gImageHandle,
                &mFontBin,
                NULL
                );
  ASSERT (HiiHandle != NULL);
}

开发者ID:ChenFanFnst，项目名称:edk2，代码行数:19，代码来源:Language.c

示例20: SmbiosMiscEntryPoint

/**
  Standard EFI driver point.  This driver parses the mSmbiosMiscDataTable
  structure and reports any generated data using SMBIOS protocol.

  @param  ImageHandle     Handle for the image of this driver
  @param  SystemTable     Pointer to the EFI System Table

  @retval  EFI_SUCCESS    The data was successfully stored.

**/                
EFI_STATUS 
EFIAPI
SmbiosMiscEntryPoint(
  IN EFI_HANDLE         ImageHandle,
  IN EFI_SYSTEM_TABLE   *SystemTable
  )
{
  UINTN                Index;
  EFI_STATUS           EfiStatus;
  EFI_SMBIOS_PROTOCOL  *Smbios;  


  mImageHandle = ImageHandle;

  EfiStatus = gBS->LocateProtocol(&gEfiSmbiosProtocolGuid, NULL, (VOID**)&Smbios);

  if (EFI_ERROR(EfiStatus)) {
    DEBUG((EFI_D_ERROR, "Could not locate SMBIOS protocol.  %r\n", EfiStatus));
    return EfiStatus;
  }

  mHiiHandle = HiiAddPackages (
                 &gEfiCallerIdGuid,
                 mImageHandle,
                 SmbiosMiscStrings,
                 NULL
                 );
  ASSERT (mHiiHandle != NULL);

  for (Index = 0; Index < mSmbiosMiscDataTableEntries; ++Index) {
    //
    // If the entry have a function pointer, just log the data.
    //
    if (mSmbiosMiscDataTable[Index].Function != NULL) {
      EfiStatus = (*mSmbiosMiscDataTable[Index].Function)(
        mSmbiosMiscDataTable[Index].RecordData,
        Smbios
        );

      if (EFI_ERROR(EfiStatus)) {
        DEBUG((EFI_D_ERROR, "Misc smbios store error.  Index=%d, ReturnStatus=%r\n", Index, EfiStatus));
        return EfiStatus;
      }
    }
  }

  return EfiStatus;
}

开发者ID:01org，项目名称:Galileo-Runtime，代码行数:58，代码来源:SmbiosMiscEntryPoint.c

注：本文中的HiiAddPackages函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ HiiAllocateOpCodeHandle函数代码示例发布时间：2022-05-30

C++ HideWindow函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18264|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9677|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8177|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8548|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8456|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9388|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8427|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7862|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8411|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ HiiAddPackages函数代码示例

示例1: ShellNetwork1CommandsLibConstructor

示例2: ShellDynCmdRunAxfInstall

示例3: ShellInstall1CommandsLibConstructor

示例4: LegacyBootMaintUiLibConstructor

示例5: InstallHiiPages

示例6: ShellLevel1CommandsLibConstructor

示例7: ShellTftpCommandLibConstructor

示例8: ASSERT

示例9: GpioE6xxGetHiiHandle

示例10: InitializeFrontPage

示例11: InstallTrEEConfigForm

示例12: GetHiiHandle

示例13: ExportFonts

示例14: OemGetPackages

示例15: InitializeStringSupport

示例16: CustomizedDisplayLibConstructor

示例17: SmbiosGenEntrypoint

示例18: UefiShellDebug1CommandsLibConstructor

示例19: ExportFonts

示例20: SmbiosMiscEntryPoint

请发表评论

全部评论

上一篇：

下一篇：

dphi-official/Machine_Learning_Bootcamp

tianli/matlab_offscreen: Matlab offscree

win7系统注册表编辑器打开的操作方法

これがマストドンだ！ 使い方からインスタ

芙蓉王（硬领航）多少钱一包？

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053

これがマストドンだ！使い方からインスタ