C++ HscxVersion函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中HscxVersion函数的典型用法代码示例。如果您正苦于以下问题：C++ HscxVersion函数的具体用法？C++ HscxVersion怎么用？C++ HscxVersion使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了HscxVersion函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: setup_saphir

int __init
setup_saphir(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, saphir_rev);
	printk(KERN_INFO "HiSax: HST Saphir driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_HSTSAPHIR)
		return (0);

	/* IO-Ports */
	cs->hw.saphir.cfg_reg = card->para[1];
	cs->hw.saphir.isac = card->para[1] + ISAC_DATA;
	cs->hw.saphir.hscx = card->para[1] + HSCX_DATA;
	cs->hw.saphir.ale = card->para[1] + ADDRESS_REG;
	cs->irq = card->para[0];
	if (check_region((cs->hw.saphir.cfg_reg), 6)) {
		printk(KERN_WARNING
			"HiSax: %s config port %x-%x already in use\n",
			CardType[card->typ],
			cs->hw.saphir.cfg_reg,
			cs->hw.saphir.cfg_reg + 5);
		return (0);
	} else
		request_region(cs->hw.saphir.cfg_reg,6, "saphir");

	printk(KERN_INFO
	       "HiSax: %s config irq:%d io:0x%X\n",
	       CardType[cs->typ], cs->irq,
	       cs->hw.saphir.cfg_reg);

	cs->hw.saphir.timer.function = (void *) SaphirWatchDog;
	cs->hw.saphir.timer.data = (long) cs;
	init_timer(&cs->hw.saphir.timer);
	cs->hw.saphir.timer.expires = jiffies + 4*HZ;
	add_timer(&cs->hw.saphir.timer);
	if (saphir_reset(cs)) {
		release_io_saphir(cs);
		return (0);
	}
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &saphir_card_msg;
	cs->irq_func = &saphir_interrupt;
	ISACVersion(cs, "saphir:");
	if (HscxVersion(cs, "saphir:")) {
		printk(KERN_WARNING
		    "saphir: wrong HSCX versions check IO address\n");
		release_io_saphir(cs);
		return (0);
	}
	return (1);
}

开发者ID:JBTech，项目名称:ralink_rt5350，代码行数:59，代码来源:saphir.c

示例2: setup_sportster

int __init
setup_sportster(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, sportster_revision);
	printk(KERN_INFO "HiSax: USR Sportster driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_SPORTSTER)
		return (0);

	cs->hw.spt.cfg_reg = card->para[1];
	cs->irq = card->para[0];
	if (!get_io_range(cs))
		return (0);
	cs->hw.spt.isac = cs->hw.spt.cfg_reg + SPORTSTER_ISAC;
	cs->hw.spt.hscx[0] = cs->hw.spt.cfg_reg + SPORTSTER_HSCXA;
	cs->hw.spt.hscx[1] = cs->hw.spt.cfg_reg + SPORTSTER_HSCXB;
	
	switch(cs->irq) {
		case 5:	cs->hw.spt.res_irq = 1;
			break;
		case 7:	cs->hw.spt.res_irq = 2;
			break;
		case 10:cs->hw.spt.res_irq = 3;
			break;
		case 11:cs->hw.spt.res_irq = 4;
			break;
		case 12:cs->hw.spt.res_irq = 5;
			break;
		case 14:cs->hw.spt.res_irq = 6;
			break;
		case 15:cs->hw.spt.res_irq = 7;
			break;
		default:release_io_sportster(cs);
			printk(KERN_WARNING "Sportster: wrong IRQ\n");
			return(0);
	}
	printk(KERN_INFO "HiSax: %s config irq:%d cfg:0x%X\n",
		CardType[cs->typ], cs->irq, cs->hw.spt.cfg_reg);
	setup_isac(cs);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &Sportster_card_msg;
	cs->irq_func = &sportster_interrupt;
	ISACVersion(cs, "Sportster:");
	if (HscxVersion(cs, "Sportster:")) {
		printk(KERN_WARNING
		       "Sportster: wrong HSCX versions check IO address\n");
		release_io_sportster(cs);
		return (0);
	}
	return (1);
}

开发者ID:jameshilliard，项目名称:actiontec_opensrc_mi424wr-rev-ef_fw-20-19-8，代码行数:59，代码来源:sportster.c

示例3: setup_avm_a1_pcmcia

int __devinit
setup_avm_a1_pcmcia(struct IsdnCard *card)
{
	u_char model, vers;
	struct IsdnCardState *cs = card->cs;
	long flags;
	char tmp[64];


	strcpy(tmp, avm_revision);
	printk(KERN_INFO "HiSax: AVM A1 PCMCIA driver Rev. %s\n",
						 HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_A1_PCMCIA)
		return (0);

	cs->hw.avm.cfg_reg = card->para[1];
	cs->irq = card->para[0];


	save_flags(flags);
	outb(cs->hw.avm.cfg_reg+ASL1_OFFSET, ASL1_W_ENABLE_S0);
        sti();

	byteout(cs->hw.avm.cfg_reg+ASL0_OFFSET,0x00);
	HZDELAY(HZ / 5 + 1);
	byteout(cs->hw.avm.cfg_reg+ASL0_OFFSET,ASL0_W_RESET);
	HZDELAY(HZ / 5 + 1);
	byteout(cs->hw.avm.cfg_reg+ASL0_OFFSET,0x00);

	byteout(cs->hw.avm.cfg_reg+ASL0_OFFSET, ASL0_W_TDISABLE|ASL0_W_TRESET);

	restore_flags(flags);

	model = bytein(cs->hw.avm.cfg_reg+MODREG_OFFSET);
	vers = bytein(cs->hw.avm.cfg_reg+VERREG_OFFSET);

	printk(KERN_INFO "AVM A1 PCMCIA: io 0x%x irq %d model %d version %d\n",
				cs->hw.avm.cfg_reg, cs->irq, model, vers);

	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &AVM_card_msg;
	cs->irq_func = &avm_a1p_interrupt;

	ISACVersion(cs, "AVM A1 PCMCIA:");
	if (HscxVersion(cs, "AVM A1 PCMCIA:")) {
		printk(KERN_WARNING
		       "AVM A1 PCMCIA: wrong HSCX versions check IO address\n");
		return (0);
	}
	return (1);
}

开发者ID:romanalexander，项目名称:Trickles，代码行数:57，代码来源:avm_a1p.c

示例4: hscxisac_setup

int
hscxisac_setup(struct IsdnCardState *cs, struct dc_hw_ops *isac_ops,
	       struct bc_hw_ops *hscx_ops)
{
	isac_setup(cs, isac_ops);
	cs->bc_hw_ops = hscx_ops;
	if (HscxVersion(cs, "HiSax:")) {
		printk(KERN_WARNING "HiSax: invalid HSCX version\n");
		return -ENODEV;
	}
	return 0;
}

开发者ID:sarnobat，项目名称:knoppix，代码行数:12，代码来源:hscx.c

示例5: setup_mic

int __init
setup_mic(struct IsdnCard *card)
{
	int bytecnt;
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, mic_revision);
	printk(KERN_INFO "HiSax: mic driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_MIC)
		return (0);

	bytecnt = 8;
	cs->hw.mic.cfg_reg = card->para[1];
	cs->irq = card->para[0];
	cs->hw.mic.adr = cs->hw.mic.cfg_reg + MIC_ADR;
	cs->hw.mic.isac = cs->hw.mic.cfg_reg + MIC_ISAC;
	cs->hw.mic.hscx = cs->hw.mic.cfg_reg + MIC_HSCX;

	if (check_region((cs->hw.mic.cfg_reg), bytecnt)) {
		printk(KERN_WARNING
		       "HiSax: %s config port %x-%x already in use\n",
		       CardType[card->typ],
		       cs->hw.mic.cfg_reg,
		       cs->hw.mic.cfg_reg + bytecnt);
		return (0);
	} else {
		request_region(cs->hw.mic.cfg_reg, bytecnt, "mic isdn");
	}

	printk(KERN_INFO
	       "mic: defined at 0x%x IRQ %d\n",
	       cs->hw.mic.cfg_reg,
	       cs->irq);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &mic_card_msg;
	cs->irq_func = &mic_interrupt;
	ISACVersion(cs, "mic:");
	if (HscxVersion(cs, "mic:")) {
		printk(KERN_WARNING
		    "mic: wrong HSCX versions check IO address\n");
		release_io_mic(cs);
		return (0);
	}
	return (1);
}

开发者ID:dmgerman，项目名称:linux-pre-history，代码行数:52，代码来源:mic.c

示例6: __initfunc

__initfunc(int
setup_ix1micro(struct IsdnCard *card))
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, ix1_revision);
	printk(KERN_INFO "HiSax: ITK IX1 driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_IX1MICROR2)
		return (0);

	/* IO-Ports */
	cs->hw.ix1.isac_ale = card->para[1] + ISAC_COMMAND_OFFSET;
	cs->hw.ix1.hscx_ale = card->para[1] + HSCX_COMMAND_OFFSET;
	cs->hw.ix1.isac = card->para[1] + ISAC_DATA_OFFSET;
	cs->hw.ix1.hscx = card->para[1] + HSCX_DATA_OFFSET;
	cs->hw.ix1.cfg_reg = card->para[1];
	cs->irq = card->para[0];
	if (cs->hw.ix1.cfg_reg) {
		if (check_region((cs->hw.ix1.cfg_reg), 4)) {
			printk(KERN_WARNING
			  "HiSax: %s config port %x-%x already in use\n",
			       CardType[card->typ],
			       cs->hw.ix1.cfg_reg,
			       cs->hw.ix1.cfg_reg + 4);
			return (0);
		} else
			request_region(cs->hw.ix1.cfg_reg, 4, "ix1micro cfg");
	}
	printk(KERN_INFO
	       "HiSax: %s config irq:%d io:0x%X\n",
	       CardType[cs->typ], cs->irq,
	       cs->hw.ix1.cfg_reg);
	ix1_reset(cs);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &ix1_card_msg;
	cs->irq_func = &ix1micro_interrupt;
	ISACVersion(cs, "ix1-Micro:");
	if (HscxVersion(cs, "ix1-Micro:")) {
		printk(KERN_WARNING
		    "ix1-Micro: wrong HSCX versions check IO address\n");
		release_io_ix1micro(cs);
		return (0);
	}
	return (1);
}

开发者ID:chinnyannieb，项目名称:empeg-hijack，代码行数:52，代码来源:ix1_micro.c

示例7: setup_sedlbauer


//.........这里部分代码省略.........
		}
	}

/*
 * hw.sedl.chip is now properly set
 */
	printk(KERN_INFO "Sedlbauer: %s detected\n",
		Sedlbauer_Types[cs->subtyp]);


	if (cs->hw.sedl.chip == SEDL_CHIP_IPAC) {
		if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
	                cs->hw.sedl.adr  = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_ADR;
			cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
			cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
		} else {
	                cs->hw.sedl.adr  = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR;
			cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
			cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
		}
		test_and_set_bit(HW_IPAC, &cs->HW_Flags);
		cs->readisac = &ReadISAC_IPAC;
		cs->writeisac = &WriteISAC_IPAC;
		cs->readisacfifo = &ReadISACfifo_IPAC;
		cs->writeisacfifo = &WriteISACfifo_IPAC;
		cs->irq_func = &sedlbauer_interrupt_ipac;

		val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_ID);
		printk(KERN_INFO "Sedlbauer: IPAC version %x\n", val);
		reset_sedlbauer(cs);
	} else {
		/* ISAC_HSCX oder ISAC_ISAR */
		cs->readisac = &ReadISAC;
		cs->writeisac = &WriteISAC;
		cs->readisacfifo = &ReadISACfifo;
		cs->writeisacfifo = &WriteISACfifo;
		if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
			if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_PCI_ADR;
				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_PCI_ISAC;
				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_PCI_ISAR;
			} else {
				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ADR;
				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ISAC;
				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ISAR;
				cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ISAR_RESET_ON;
				cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg +
							SEDL_ISAR_ISA_ISAR_RESET_OFF;
			}
			cs->bcs[0].hw.isar.reg = &cs->hw.sedl.isar;
			cs->bcs[1].hw.isar.reg = &cs->hw.sedl.isar;
			test_and_set_bit(HW_ISAR, &cs->HW_Flags);
			cs->irq_func = &sedlbauer_interrupt_isar;
			cs->auxcmd = &isar_auxcmd;
			ISACVersion(cs, "Sedlbauer:");
			cs->BC_Read_Reg = &ReadISAR;
			cs->BC_Write_Reg = &WriteISAR;
			cs->BC_Send_Data = &isar_fill_fifo;
			ver = ISARVersion(cs, "Sedlbauer:");
			if (ver < 0) {
				printk(KERN_WARNING
					"Sedlbauer: wrong ISAR version (ret = %d)\n", ver);
				release_io_sedlbauer(cs);
				return (0);
			}
		} else {
			if (cs->hw.sedl.bus == SEDL_BUS_PCMCIA) {
				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_ADR;
				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_ISAC;
				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_HSCX;
				cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_RESET;
				cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_RESET;
			} else {
				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_ADR;
				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_ISAC;
				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_HSCX;
				cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_RESET_ON;
				cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_RESET_OFF;
			}
			cs->irq_func = &sedlbauer_interrupt;
			ISACVersion(cs, "Sedlbauer:");
		
			if (HscxVersion(cs, "Sedlbauer:")) {
				printk(KERN_WARNING
					"Sedlbauer: wrong HSCX versions check IO address\n");
				release_io_sedlbauer(cs);
				return (0);
			}
			reset_sedlbauer(cs);
		}
	}
	return (1);
}

开发者ID:TitaniumBoy，项目名称:lin，代码行数:101，代码来源:sedlbauer.c

示例8: setup_telespci

int __devinit
setup_telespci(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

#ifdef __BIG_ENDIAN
#error "not running on big endian machines now"
#endif

	strcpy(tmp, telespci_revision);
;
	if (cs->typ != ISDN_CTYPE_TELESPCI)
		return (0);

	if ((dev_tel = hisax_find_pci_device (PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36120, dev_tel))) {
		if (pci_enable_device(dev_tel))
			return(0);
		cs->irq = dev_tel->irq;
		if (!cs->irq) {
;
			return(0);
		}
		cs->hw.teles0.membase = ioremap(pci_resource_start(dev_tel, 0),
			PAGE_SIZE);
//		printk(KERN_INFO "Found: Zoran, base-address: 0x%llx, irq: 0x%x\n",
//			(unsigned long long)pci_resource_start(dev_tel, 0),
;
	} else {
;
		return(0);
	}

	/* Initialize Zoran PCI controller */
	writel(0x00000000, cs->hw.teles0.membase + 0x28);
	writel(0x01000000, cs->hw.teles0.membase + 0x28);
	writel(0x01000000, cs->hw.teles0.membase + 0x28);
	writel(0x7BFFFFFF, cs->hw.teles0.membase + 0x2C);
	writel(0x70000000, cs->hw.teles0.membase + 0x3C);
	writel(0x61000000, cs->hw.teles0.membase + 0x40);
	/* writel(0x00800000, cs->hw.teles0.membase + 0x200); */

//	printk(KERN_INFO
//	       "HiSax: Teles PCI config irq:%d mem:%p\n",
//	       cs->irq,
;

	setup_isac(cs);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &TelesPCI_card_msg;
	cs->irq_func = &telespci_interrupt;
	cs->irq_flags |= IRQF_SHARED;
	ISACVersion(cs, "TelesPCI:");
	if (HscxVersion(cs, "TelesPCI:")) {
//		printk(KERN_WARNING
;
		release_io_telespci(cs);
		return (0);
	}
	return (1);
}

开发者ID:rrowicki，项目名称:Chrono_Kernel-1，代码行数:67，代码来源:telespci.c

示例9: setup_teles3


//.........这里部分代码省略.........
				} else {
					release_region(cs->hw.teles3.cfg_reg, 8);
				}
			}
			return (0);
		} else
			request_region(cs->hw.teles3.isac + 32, 32, "HiSax isac");
		if (check_region((cs->hw.teles3.hscx[0] + 32), 32)) {
			printk(KERN_WARNING
			 "HiSax: %s hscx A ports %x-%x already in use\n",
			       CardType[cs->typ],
			       cs->hw.teles3.hscx[0] + 32,
			       cs->hw.teles3.hscx[0] + 64);
			if (cs->hw.teles3.cfg_reg) {
				if (cs->typ == ISDN_CTYPE_COMPAQ_ISA) {
					release_region(cs->hw.teles3.cfg_reg, 1);
				} else {
					release_region(cs->hw.teles3.cfg_reg, 8);
				}
			}
			release_ioregs(cs, 1);
			return (0);
		} else
			request_region(cs->hw.teles3.hscx[0] + 32, 32, "HiSax hscx A");
		if (check_region((cs->hw.teles3.hscx[1] + 32), 32)) {
			printk(KERN_WARNING
			 "HiSax: %s hscx B ports %x-%x already in use\n",
			       CardType[cs->typ],
			       cs->hw.teles3.hscx[1] + 32,
			       cs->hw.teles3.hscx[1] + 64);
			if (cs->hw.teles3.cfg_reg) {
				if (cs->typ == ISDN_CTYPE_COMPAQ_ISA) {
					release_region(cs->hw.teles3.cfg_reg, 1);
				} else {
					release_region(cs->hw.teles3.cfg_reg, 8);
				}
			}
			release_ioregs(cs, 3);
			return (0);
		} else
			request_region(cs->hw.teles3.hscx[1] + 32, 32, "HiSax hscx B");
	}
	if ((cs->hw.teles3.cfg_reg) && (cs->typ != ISDN_CTYPE_COMPAQ_ISA)) {
		if ((val = bytein(cs->hw.teles3.cfg_reg + 0)) != 0x51) {
			printk(KERN_WARNING "Teles: 16.3 Byte at %x is %x\n",
			       cs->hw.teles3.cfg_reg + 0, val);
			release_io_teles3(cs);
			return (0);
		}
		if ((val = bytein(cs->hw.teles3.cfg_reg + 1)) != 0x93) {
			printk(KERN_WARNING "Teles: 16.3 Byte at %x is %x\n",
			       cs->hw.teles3.cfg_reg + 1, val);
			release_io_teles3(cs);
			return (0);
		}
		val = bytein(cs->hw.teles3.cfg_reg + 2);/* 0x1e=without AB
							 * 0x1f=with AB
							 * 0x1c 16.3 ???
							 * 0x39 16.3 1.1
							 * 0x38 16.3 1.3
							 * 0x46 16.3 with AB + Video (Teles-Vision)
							 */
		if (val != 0x46 && val != 0x39 && val != 0x38 && val != 0x1c && val != 0x1e && val != 0x1f) {
			printk(KERN_WARNING "Teles: 16.3 Byte at %x is %x\n",
			       cs->hw.teles3.cfg_reg + 2, val);
			release_io_teles3(cs);
			return (0);
		}
	}
	printk(KERN_INFO
	       "HiSax: %s config irq:%d isac:0x%X  cfg:0x%X\n",
	       CardType[cs->typ], cs->irq,
	       cs->hw.teles3.isac + 32, cs->hw.teles3.cfg_reg);
	printk(KERN_INFO
	       "HiSax: hscx A:0x%X  hscx B:0x%X\n",
	       cs->hw.teles3.hscx[0] + 32, cs->hw.teles3.hscx[1] + 32);

	if (reset_teles3(cs)) {
		printk(KERN_WARNING "Teles3: wrong IRQ\n");
		release_io_teles3(cs);
		return (0);
	}
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &Teles_card_msg;
	cs->irq_func = &teles3_interrupt;
	ISACVersion(cs, "Teles3:");
	if (HscxVersion(cs, "Teles3:")) {
		printk(KERN_WARNING
		       "Teles3: wrong HSCX versions check IO address\n");
		release_io_teles3(cs);
		return (0);
	}
	return (1);
}

开发者ID:froggatt，项目名称:edimax-br-6528n，代码行数:101，代码来源:teles3.c

示例10: setup_diva


//.........这里部分代码省略.........
		}

		if (!cs->irq) {
			printk(KERN_WARNING "Diva: No IRQ for PCI card found\n");
			return(0);
		}

		if (!cs->hw.diva.cfg_reg) {
			printk(KERN_WARNING "Diva: No IO-Adr for PCI card found\n");
			return(0);
		}
		cs->irq_flags |= SA_SHIRQ;
#else
		printk(KERN_WARNING "Diva: cfgreg 0 and NO_PCI_BIOS\n");
		printk(KERN_WARNING "Diva: unable to config DIVA PCI\n");
		return (0);
#endif /* CONFIG_PCI */
		if (cs->subtyp == DIVA_IPAC_PCI) {
			cs->hw.diva.ctrl = 0;
			cs->hw.diva.isac = 0;
			cs->hw.diva.hscx = 0;
			cs->hw.diva.isac_adr = 0;
			cs->hw.diva.hscx_adr = 0;
			test_and_set_bit(HW_IPAC, &cs->HW_Flags);
			bytecnt = 0;
		} else {
			cs->hw.diva.ctrl = cs->hw.diva.cfg_reg + DIVA_PCI_CTRL;
			cs->hw.diva.isac = cs->hw.diva.cfg_reg + DIVA_PCI_ISAC_DATA;
			cs->hw.diva.hscx = cs->hw.diva.cfg_reg + DIVA_HSCX_DATA;
			cs->hw.diva.isac_adr = cs->hw.diva.cfg_reg + DIVA_PCI_ISAC_ADR;
			cs->hw.diva.hscx_adr = cs->hw.diva.cfg_reg + DIVA_HSCX_ADR;
			bytecnt = 32;
		}
	}

	printk(KERN_INFO
		"Diva: %s card configured at %#lx IRQ %d\n",
		(cs->subtyp == DIVA_PCI) ? "PCI" :
		(cs->subtyp == DIVA_ISA) ? "ISA" : 
		(cs->subtyp == DIVA_IPAC_ISA) ? "IPAC ISA" : "IPAC PCI",
		cs->hw.diva.cfg_reg, cs->irq);
	if ((cs->subtyp == DIVA_IPAC_PCI) || (cs->subtyp == DIVA_PCI))
		printk(KERN_INFO "Diva: %s PCI space at %#lx\n",
			(cs->subtyp == DIVA_PCI) ? "PCI" : "IPAC PCI",
			cs->hw.diva.pci_cfg);
	if (cs->subtyp != DIVA_IPAC_PCI) {
		if (check_region(cs->hw.diva.cfg_reg, bytecnt)) {
			printk(KERN_WARNING
			       "HiSax: %s config port %lx-%lx already in use\n",
			       CardType[card->typ],
			       cs->hw.diva.cfg_reg,
			       cs->hw.diva.cfg_reg + bytecnt);
			return (0);
		} else {
			request_region(cs->hw.diva.cfg_reg, bytecnt, "diva isdn");
		}
	}
	reset_diva(cs);
	cs->BC_Read_Reg  = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &Diva_card_msg;
	if (cs->subtyp == DIVA_IPAC_ISA) {
		cs->readisac  = &ReadISAC_IPAC;
		cs->writeisac = &WriteISAC_IPAC;
		cs->readisacfifo  = &ReadISACfifo_IPAC;
		cs->writeisacfifo = &WriteISACfifo_IPAC;
		cs->irq_func = &diva_irq_ipac_isa;
		val = readreg(cs->hw.diva.isac_adr, cs->hw.diva.isac, IPAC_ID);
		printk(KERN_INFO "Diva: IPAC version %x\n", val);
	} else if (cs->subtyp == DIVA_IPAC_PCI) {
		cs->readisac  = &MemReadISAC_IPAC;
		cs->writeisac = &MemWriteISAC_IPAC;
		cs->readisacfifo  = &MemReadISACfifo_IPAC;
		cs->writeisacfifo = &MemWriteISACfifo_IPAC;
		cs->BC_Read_Reg  = &MemReadHSCX;
		cs->BC_Write_Reg = &MemWriteHSCX;
		cs->BC_Send_Data = &Memhscx_fill_fifo;
		cs->irq_func = &diva_irq_ipac_pci;
		val = memreadreg(cs->hw.diva.cfg_reg, IPAC_ID);
		printk(KERN_INFO "Diva: IPAC version %x\n", val);
	} else { /* DIVA 2.0 */
		cs->hw.diva.tl.function = (void *) diva_led_handler;
		cs->hw.diva.tl.data = (long) cs;
		init_timer(&cs->hw.diva.tl);
		cs->readisac  = &ReadISAC;
		cs->writeisac = &WriteISAC;
		cs->readisacfifo  = &ReadISACfifo;
		cs->writeisacfifo = &WriteISACfifo;
		cs->irq_func = &diva_interrupt;
		ISACVersion(cs, "Diva:");
		if (HscxVersion(cs, "Diva:")) {
			printk(KERN_WARNING
		       "Diva: wrong HSCX versions check IO address\n");
			release_io_diva(cs);
			return (0);
		}
	}
	return (1);
}

开发者ID:nhanh0，项目名称:hah，代码行数:101，代码来源:diva.c

示例11: setup_gazel

int __devinit
setup_gazel(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];
	u_char val;

	strcpy(tmp, gazel_revision);
	printk(KERN_INFO "Gazel: Driver Revision %s\n", HiSax_getrev(tmp));

	if (cs->typ != ISDN_CTYPE_GAZEL)
		return (0);

	if (card->para[0]) {
		if (setup_gazelisa(card, cs))
			return (0);
	} else {

#ifdef CONFIG_PCI_LEGACY
		if (setup_gazelpci(cs))
			return (0);
#else
		printk(KERN_WARNING "Gazel: Card PCI requested and NO_PCI_BIOS, unable to config\n");
		return (0);
#endif				/* CONFIG_PCI */
	}

	if (reserve_regions(card, cs)) {
		return (0);
	}
	if (reset_gazel(cs)) {
		printk(KERN_WARNING "Gazel: wrong IRQ\n");
		release_io_gazel(cs);
		return (0);
	}
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &Gazel_card_msg;

	switch (cs->subtyp) {
		case R647:
		case R685:
			cs->irq_func = &gazel_interrupt;
			ISACVersion(cs, "Gazel:");
			if (HscxVersion(cs, "Gazel:")) {
				printk(KERN_WARNING
				       "Gazel: wrong HSCX versions check IO address\n");
				release_io_gazel(cs);
				return (0);
			}
			break;
		case R742:
		case R753:
			cs->irq_func = &gazel_interrupt_ipac;
			val = ReadISAC(cs, IPAC_ID - 0x80);
			printk(KERN_INFO "Gazel: IPAC version %x\n", val);
			break;
	}

	return (1);
}

开发者ID:PennPanda，项目名称:linux-repo，代码行数:66，代码来源:gazel.c

示例12: setup_ix1micro

int __devinit
setup_ix1micro(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, ix1_revision);
	printk(KERN_INFO "HiSax: ITK IX1 driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_IX1MICROR2)
		return (0);

#ifdef __ISAPNP__
	if (!card->para[1] && isapnp_present()) {
		struct pnp_dev *pnp_d;
		while(ipid->card_vendor) {
			if ((pnp_c = pnp_find_card(ipid->card_vendor,
				ipid->card_device, pnp_c))) {
				pnp_d = NULL;
				if ((pnp_d = pnp_find_dev(pnp_c,
					ipid->vendor, ipid->function, pnp_d))) {
					int err;

					printk(KERN_INFO "HiSax: %s detected\n",
						(char *)ipid->driver_data);
					pnp_disable_dev(pnp_d);
					err = pnp_activate_dev(pnp_d);
					if (err<0) {
						printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
							__FUNCTION__, err);
						return(0);
					}
					card->para[1] = pnp_port_start(pnp_d, 0);
					card->para[0] = pnp_irq(pnp_d, 0);
					if (!card->para[0] || !card->para[1]) {
						printk(KERN_ERR "ITK PnP:some resources are missing %ld/%lx\n",
							card->para[0], card->para[1]);
						pnp_disable_dev(pnp_d);
						return(0);
					}
					break;
				} else {
					printk(KERN_ERR "ITK PnP: PnP error card found, no device\n");
				}
			}
			ipid++;
			pnp_c = NULL;
		} 
		if (!ipid->card_vendor) {
			printk(KERN_INFO "ITK PnP: no ISAPnP card found\n");
			return(0);
		}
	}
#endif
	/* IO-Ports */
	cs->hw.ix1.isac_ale = card->para[1] + ISAC_COMMAND_OFFSET;
	cs->hw.ix1.hscx_ale = card->para[1] + HSCX_COMMAND_OFFSET;
	cs->hw.ix1.isac = card->para[1] + ISAC_DATA_OFFSET;
	cs->hw.ix1.hscx = card->para[1] + HSCX_DATA_OFFSET;
	cs->hw.ix1.cfg_reg = card->para[1];
	cs->irq = card->para[0];
	if (cs->hw.ix1.cfg_reg) {
		if (!request_region(cs->hw.ix1.cfg_reg, 4, "ix1micro cfg")) {
			printk(KERN_WARNING
			  "HiSax: %s config port %x-%x already in use\n",
			       CardType[card->typ],
			       cs->hw.ix1.cfg_reg,
			       cs->hw.ix1.cfg_reg + 4);
			return (0);
		}
	}
	printk(KERN_INFO "HiSax: %s config irq:%d io:0x%X\n",
		CardType[cs->typ], cs->irq, cs->hw.ix1.cfg_reg);
	setup_isac(cs);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &ix1_card_msg;
	cs->irq_func = &ix1micro_interrupt;
	ISACVersion(cs, "ix1-Micro:");
	if (HscxVersion(cs, "ix1-Micro:")) {
		printk(KERN_WARNING
		    "ix1-Micro: wrong HSCX versions check IO address\n");
		release_io_ix1micro(cs);
		return (0);
	}
	return (1);
}

开发者ID:ManiacTwister，项目名称:linux-hnd，代码行数:91，代码来源:ix1_micro.c

示例13: setup_diva_common

static int setup_diva_common(struct IsdnCardState *cs)
{
	int bytecnt;
	u_char val;

	if ((cs->subtyp == DIVA_ISA) || (cs->subtyp == DIVA_IPAC_ISA))
		bytecnt = 8;
	else
		bytecnt = 32;

	printk(KERN_INFO
	       "Diva: %s card configured at %#lx IRQ %d\n",
	       (cs->subtyp == DIVA_PCI) ? "PCI" :
	       (cs->subtyp == DIVA_ISA) ? "ISA" :
	       (cs->subtyp == DIVA_IPAC_ISA) ? "IPAC ISA" :
	       (cs->subtyp == DIVA_IPAC_PCI) ? "IPAC PCI" : "IPACX PCI",
	       cs->hw.diva.cfg_reg, cs->irq);
	if ((cs->subtyp == DIVA_IPAC_PCI)  ||
	    (cs->subtyp == DIVA_IPACX_PCI) ||
	    (cs->subtyp == DIVA_PCI))
		printk(KERN_INFO "Diva: %s space at %#lx\n",
		       (cs->subtyp == DIVA_PCI) ? "PCI" :
		       (cs->subtyp == DIVA_IPAC_PCI) ? "IPAC PCI" : "IPACX PCI",
		       cs->hw.diva.pci_cfg);
	if ((cs->subtyp != DIVA_IPAC_PCI) &&
	    (cs->subtyp != DIVA_IPACX_PCI)) {
		if (!request_region(cs->hw.diva.cfg_reg, bytecnt, "diva isdn")) {
			printk(KERN_WARNING
			       "HiSax: %s config port %lx-%lx already in use\n",
			       "diva",
			       cs->hw.diva.cfg_reg,
			       cs->hw.diva.cfg_reg + bytecnt);
			iounmap_diva(cs);
			return (0);
		}
	}
	cs->BC_Read_Reg  = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &Diva_card_msg;
	setup_isac(cs);
	if (cs->subtyp == DIVA_IPAC_ISA) {
		cs->readisac  = &ReadISAC_IPAC;
		cs->writeisac = &WriteISAC_IPAC;
		cs->readisacfifo  = &ReadISACfifo_IPAC;
		cs->writeisacfifo = &WriteISACfifo_IPAC;
		cs->irq_func = &diva_irq_ipac_isa;
		val = readreg(cs->hw.diva.isac_adr, cs->hw.diva.isac, IPAC_ID);
		printk(KERN_INFO "Diva: IPAC version %x\n", val);
	} else if (cs->subtyp == DIVA_IPAC_PCI) {
		cs->readisac  = &MemReadISAC_IPAC;
		cs->writeisac = &MemWriteISAC_IPAC;
		cs->readisacfifo  = &MemReadISACfifo_IPAC;
		cs->writeisacfifo = &MemWriteISACfifo_IPAC;
		cs->BC_Read_Reg  = &MemReadHSCX;
		cs->BC_Write_Reg = &MemWriteHSCX;
		cs->BC_Send_Data = &Memhscx_fill_fifo;
		cs->irq_func = &diva_irq_ipac_pci;
		val = memreadreg(cs->hw.diva.cfg_reg, IPAC_ID);
		printk(KERN_INFO "Diva: IPAC version %x\n", val);
	} else if (cs->subtyp == DIVA_IPACX_PCI) {
		cs->readisac  = &MemReadISAC_IPACX;
		cs->writeisac = &MemWriteISAC_IPACX;
		cs->readisacfifo  = &MemReadISACfifo_IPACX;
		cs->writeisacfifo = &MemWriteISACfifo_IPACX;
		cs->BC_Read_Reg  = &MemReadHSCX_IPACX;
		cs->BC_Write_Reg = &MemWriteHSCX_IPACX;
		cs->BC_Send_Data = NULL; // function located in ipacx module
		cs->irq_func = &diva_irq_ipacx_pci;
		printk(KERN_INFO "Diva: IPACX Design Id: %x\n",
		       MemReadISAC_IPACX(cs, IPACX_ID) & 0x3F);
	} else { /* DIVA 2.0 */
		setup_timer(&cs->hw.diva.tl, (void *)diva_led_handler,
			    (long)cs);
		cs->readisac  = &ReadISAC;
		cs->writeisac = &WriteISAC;
		cs->readisacfifo  = &ReadISACfifo;
		cs->writeisacfifo = &WriteISACfifo;
		cs->irq_func = &diva_interrupt;
		ISACVersion(cs, "Diva:");
		if (HscxVersion(cs, "Diva:")) {
			printk(KERN_WARNING
			       "Diva: wrong HSCX versions check IO address\n");
			release_io_diva(cs);
			return (0);
		}
	}
	return (1);
}

开发者ID:asmalldev，项目名称:linux，代码行数:89，代码来源:diva.c

示例14: setup_asuscom

int __init
setup_asuscom(struct IsdnCard *card)
{
    int bytecnt;
    struct IsdnCardState *cs = card->cs;
    u_char val;
    char tmp[64];

    strcpy(tmp, Asuscom_revision);
    printk(KERN_INFO "HiSax: Asuscom ISDNLink driver Rev. %s\n", HiSax_getrev(tmp));
    if (cs->typ != ISDN_CTYPE_ASUSCOM)
        return (0);
#ifdef __ISAPNP__
    if (!card->para[1] && isapnp_present()) {
        struct pnp_dev *pnp_d;
        while(ipid->card_vendor) {
            if ((pnp_c = pnp_find_card(ipid->card_vendor,
                                       ipid->card_device, pnp_c))) {
                pnp_d = NULL;
                if ((pnp_d = pnp_find_dev(pnp_c,
                                          ipid->vendor, ipid->function, pnp_d))) {
                    int err;

                    printk(KERN_INFO "HiSax: %s detected\n",
                           (char *)ipid->driver_data);
                    pnp_disable_dev(pnp_d);
                    err = pnp_activate_dev(pnp_d);
                    if (err<0) {
                        printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
                               __FUNCTION__, err);
                        return(0);
                    }
                    card->para[1] = pnp_port_start(pnp_d, 0);
                    card->para[0] = pnp_irq(pnp_d, 0);
                    if (!card->para[0] || !card->para[1]) {
                        printk(KERN_ERR "AsusPnP:some resources are missing %ld/%lx\n",
                               card->para[0], card->para[1]);
                        pnp_disable_dev(pnp_d);
                        return(0);
                    }
                    break;
                } else {
                    printk(KERN_ERR "AsusPnP: PnP error card found, no device\n");
                }
            }
            ipid++;
            pnp_c = NULL;
        }
        if (!ipid->card_vendor) {
            printk(KERN_INFO "AsusPnP: no ISAPnP card found\n");
            return(0);
        }
    }
#endif
    bytecnt = 8;
    cs->hw.asus.cfg_reg = card->para[1];
    cs->irq = card->para[0];
    if (!request_region(cs->hw.asus.cfg_reg, bytecnt, "asuscom isdn")) {
        printk(KERN_WARNING
               "HiSax: %s config port %x-%x already in use\n",
               CardType[card->typ],
               cs->hw.asus.cfg_reg,
               cs->hw.asus.cfg_reg + bytecnt);
        return (0);
    }
    printk(KERN_INFO "ISDNLink: defined at 0x%x IRQ %d\n",
           cs->hw.asus.cfg_reg, cs->irq);
    setup_isac(cs);
    cs->BC_Read_Reg = &ReadHSCX;
    cs->BC_Write_Reg = &WriteHSCX;
    cs->BC_Send_Data = &hscx_fill_fifo;
    cs->cardmsg = &Asus_card_msg;
    val = readreg(cs->hw.asus.cfg_reg + ASUS_IPAC_ALE,
                  cs->hw.asus.cfg_reg + ASUS_IPAC_DATA, IPAC_ID);
    if ((val == 1) || (val == 2)) {
        cs->subtyp = ASUS_IPAC;
        cs->hw.asus.adr  = cs->hw.asus.cfg_reg + ASUS_IPAC_ALE;
        cs->hw.asus.isac = cs->hw.asus.cfg_reg + ASUS_IPAC_DATA;
        cs->hw.asus.hscx = cs->hw.asus.cfg_reg + ASUS_IPAC_DATA;
        test_and_set_bit(HW_IPAC, &cs->HW_Flags);
        cs->readisac = &ReadISAC_IPAC;
        cs->writeisac = &WriteISAC_IPAC;
        cs->readisacfifo = &ReadISACfifo_IPAC;
        cs->writeisacfifo = &WriteISACfifo_IPAC;
        cs->irq_func = &asuscom_interrupt_ipac;
        printk(KERN_INFO "Asus: IPAC version %x\n", val);
    } else {
        cs->subtyp = ASUS_ISACHSCX;
        cs->hw.asus.adr = cs->hw.asus.cfg_reg + ASUS_ADR;
        cs->hw.asus.isac = cs->hw.asus.cfg_reg + ASUS_ISAC;
        cs->hw.asus.hscx = cs->hw.asus.cfg_reg + ASUS_HSCX;
        cs->hw.asus.u7 = cs->hw.asus.cfg_reg + ASUS_CTRL_U7;
        cs->hw.asus.pots = cs->hw.asus.cfg_reg + ASUS_CTRL_POTS;
        cs->readisac = &ReadISAC;
        cs->writeisac = &WriteISAC;
        cs->readisacfifo = &ReadISACfifo;
        cs->writeisacfifo = &WriteISACfifo;
        cs->irq_func = &asuscom_interrupt;
        ISACVersion(cs, "ISDNLink:");
        if (HscxVersion(cs, "ISDNLink:")) {
//.........这里部分代码省略.........

开发者ID:BackupTheBerlios，项目名称:tew632-brp-svn，代码行数:101，代码来源:asuscom.c

示例15: setup_diva


//.........这里部分代码省略.........
		return (0);
#endif /* CONFIG_PCI */
		if ((cs->subtyp == DIVA_IPAC_PCI) ||
		    (cs->subtyp == DIVA_IPACX_PCI)   ) {
			cs->hw.diva.ctrl = 0;
			cs->hw.diva.isac = 0;
			cs->hw.diva.hscx = 0;
			cs->hw.diva.isac_adr = 0;
			cs->hw.diva.hscx_adr = 0;
			test_and_set_bit(HW_IPAC, &cs->HW_Flags);
			bytecnt = 0;
		} else {
			cs->hw.diva.ctrl = cs->hw.diva.cfg_reg + DIVA_PCI_CTRL;
			cs->hw.diva.isac = cs->hw.diva.cfg_reg + DIVA_PCI_ISAC_DATA;
			cs->hw.diva.hscx = cs->hw.diva.cfg_reg + DIVA_HSCX_DATA;
			cs->hw.diva.isac_adr = cs->hw.diva.cfg_reg + DIVA_PCI_ISAC_ADR;
			cs->hw.diva.hscx_adr = cs->hw.diva.cfg_reg + DIVA_HSCX_ADR;
			bytecnt = 32;
		}
	}
ready:
	printk(KERN_INFO
		"Diva: %s card configured at %#lx IRQ %d\n",
		(cs->subtyp == DIVA_PCI) ? "PCI" :
		(cs->subtyp == DIVA_ISA) ? "ISA" : 
		(cs->subtyp == DIVA_IPAC_ISA) ? "IPAC ISA" :
		(cs->subtyp == DIVA_IPAC_PCI) ? "IPAC PCI" : "IPACX PCI",
		cs->hw.diva.cfg_reg, cs->irq);
	if ((cs->subtyp == DIVA_IPAC_PCI)  || 
	    (cs->subtyp == DIVA_IPACX_PCI) || 
	    (cs->subtyp == DIVA_PCI)         )
		printk(KERN_INFO "Diva: %s space at %#lx\n",
			(cs->subtyp == DIVA_PCI) ? "PCI" :
			(cs->subtyp == DIVA_IPAC_PCI) ? "IPAC PCI" : "IPACX PCI",
			cs->hw.diva.pci_cfg);
	if ((cs->subtyp != DIVA_IPAC_PCI) &&
	    (cs->subtyp != DIVA_IPACX_PCI)   ) {
		if (!request_region(cs->hw.diva.cfg_reg, bytecnt, "diva isdn")) {
			printk(KERN_WARNING
			       "HiSax: %s config port %lx-%lx already in use\n",
			       CardType[card->typ],
			       cs->hw.diva.cfg_reg,
			       cs->hw.diva.cfg_reg + bytecnt);
			return (0);
		}
	}
	cs->BC_Read_Reg  = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &Diva_card_msg;
	setup_isac(cs);
	if (cs->subtyp == DIVA_IPAC_ISA) {
		cs->readisac  = &ReadISAC_IPAC;
		cs->writeisac = &WriteISAC_IPAC;
		cs->readisacfifo  = &ReadISACfifo_IPAC;
		cs->writeisacfifo = &WriteISACfifo_IPAC;
		cs->irq_func = &diva_irq_ipac_isa;
		val = readreg(cs->hw.diva.isac_adr, cs->hw.diva.isac, IPAC_ID);
		printk(KERN_INFO "Diva: IPAC version %x\n", val);
	} else if (cs->subtyp == DIVA_IPAC_PCI) {
		cs->readisac  = &MemReadISAC_IPAC;
		cs->writeisac = &MemWriteISAC_IPAC;
		cs->readisacfifo  = &MemReadISACfifo_IPAC;
		cs->writeisacfifo = &MemWriteISACfifo_IPAC;
		cs->BC_Read_Reg  = &MemReadHSCX;
		cs->BC_Write_Reg = &MemWriteHSCX;
		cs->BC_Send_Data = &Memhscx_fill_fifo;
		cs->irq_func = &diva_irq_ipac_pci;
		val = memreadreg(cs->hw.diva.cfg_reg, IPAC_ID);
		printk(KERN_INFO "Diva: IPAC version %x\n", val);
	} else if (cs->subtyp == DIVA_IPACX_PCI) {
		cs->readisac  = &MemReadISAC_IPACX;
		cs->writeisac = &MemWriteISAC_IPACX;
		cs->readisacfifo  = &MemReadISACfifo_IPACX;
		cs->writeisacfifo = &MemWriteISACfifo_IPACX;
		cs->BC_Read_Reg  = &MemReadHSCX_IPACX;
		cs->BC_Write_Reg = &MemWriteHSCX_IPACX;
		cs->BC_Send_Data = NULL; // function located in ipacx module
		cs->irq_func = &diva_irq_ipacx_pci;
		printk(KERN_INFO "Diva: IPACX Design Id: %x\n", 
			MemReadISAC_IPACX(cs, IPACX_ID) &0x3F);
	} else { /* DIVA 2.0 */
		cs->hw.diva.tl.function = (void *) diva_led_handler;
		cs->hw.diva.tl.data = (long) cs;
		init_timer(&cs->hw.diva.tl);
		cs->readisac  = &ReadISAC;
		cs->writeisac = &WriteISAC;
		cs->readisacfifo  = &ReadISACfifo;
		cs->writeisacfifo = &WriteISACfifo;
		cs->irq_func = &diva_interrupt;
		ISACVersion(cs, "Diva:");
		if (HscxVersion(cs, "Diva:")) {
			printk(KERN_WARNING
		       "Diva: wrong HSCX versions check IO address\n");
			release_io_diva(cs);
			return (0);
		}
	}
	return (1);
}

开发者ID:jameshilliard，项目名称:actiontec_opensrc_mi424wr-rev-e-f_fw-20-10-7-5，代码行数:101，代码来源:diva.c

示例16: setup_niccy


//.........这里部分代码省略.........
		cs->hw.niccy.hscx_ale = card->para[2] + HSCX_PNP;
		cs->hw.niccy.cfg_reg = 0;
		cs->subtyp = NICCY_PNP;
		cs->irq = card->para[0];
		if (!request_region(cs->hw.niccy.isac, 2, "niccy data")) {
			printk(KERN_WARNING "HiSax: NICCY data port %x-%x "
				"already in use\n",
				cs->hw.niccy.isac, cs->hw.niccy.isac + 1);
			return 0;
		}
		if (!request_region(cs->hw.niccy.isac_ale, 2, "niccy addr")) {
			printk(KERN_WARNING "HiSax: NICCY address port %x-%x "
				"already in use\n",
				cs->hw.niccy.isac_ale,
				cs->hw.niccy.isac_ale + 1);
			release_region(cs->hw.niccy.isac, 2);
			return 0;
		}
	} else {
#ifdef CONFIG_PCI
		static struct pci_dev *niccy_dev __devinitdata;

		u_int pci_ioaddr;
		cs->subtyp = 0;
		if ((niccy_dev = hisax_find_pci_device(PCI_VENDOR_ID_SATSAGEM,
						 PCI_DEVICE_ID_SATSAGEM_NICCY,
						 niccy_dev))) {
			if (pci_enable_device(niccy_dev))
				return 0;
			/* get IRQ */
			if (!niccy_dev->irq) {
				printk(KERN_WARNING
				       "Niccy: No IRQ for PCI card found\n");
				return 0;
			}
			cs->irq = niccy_dev->irq;
			cs->hw.niccy.cfg_reg = pci_resource_start(niccy_dev, 0);
			if (!cs->hw.niccy.cfg_reg) {
				printk(KERN_WARNING
				       "Niccy: No IO-Adr for PCI cfg found\n");
				return 0;
			}
			pci_ioaddr = pci_resource_start(niccy_dev, 1);
			if (!pci_ioaddr) {
				printk(KERN_WARNING
				       "Niccy: No IO-Adr for PCI card found\n");
				return 0;
			}
			cs->subtyp = NICCY_PCI;
		} else {
			printk(KERN_WARNING "Niccy: No PCI card found\n");
			return 0;
		}
		cs->irq_flags |= IRQF_SHARED;
		cs->hw.niccy.isac = pci_ioaddr + ISAC_PCI_DATA;
		cs->hw.niccy.isac_ale = pci_ioaddr + ISAC_PCI_ADDR;
		cs->hw.niccy.hscx = pci_ioaddr + HSCX_PCI_DATA;
		cs->hw.niccy.hscx_ale = pci_ioaddr + HSCX_PCI_ADDR;
		if (!request_region(cs->hw.niccy.isac, 4, "niccy")) {
			printk(KERN_WARNING
			       "HiSax: NICCY data port %x-%x already in use\n",
			       cs->hw.niccy.isac, cs->hw.niccy.isac + 4);
			return 0;
		}
		if (!request_region(cs->hw.niccy.cfg_reg, 0x40, "niccy pci")) {
			printk(KERN_WARNING
			       "HiSax: NICCY pci port %x-%x already in use\n",
			       cs->hw.niccy.cfg_reg,
			       cs->hw.niccy.cfg_reg + 0x40);
			release_region(cs->hw.niccy.isac, 4);
			return 0;
		}
#else
		printk(KERN_WARNING "Niccy: io0 0 and NO_PCI_BIOS\n");
		printk(KERN_WARNING "Niccy: unable to config NICCY PCI\n");
		return 0;
#endif				/* CONFIG_PCI */
	}
	printk(KERN_INFO "HiSax: NICCY %s config irq:%d data:0x%X ale:0x%X\n",
		(cs->subtyp == 1) ? "PnP" : "PCI",
		cs->irq, cs->hw.niccy.isac, cs->hw.niccy.isac_ale);
	setup_isac(cs);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &niccy_card_msg;
	cs->irq_func = &niccy_interrupt;
	ISACVersion(cs, "Niccy:");
	if (HscxVersion(cs, "Niccy:")) {

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ HtmlHelp函数代码示例发布时间：2022-05-30

C++ HostSwap16函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

2023-10-27

florent37/ViewAnimator: A fluent Android

2022-08-15

florent37/Shrine-MaterialDesign2: implem

2022-08-17

CVE-2020-36276

2022-09-23

SimpleSoftwareIO/simple-sms: Send and re

2022-08-13

阅读排行榜

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18264|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9677|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8177|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8548|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8456|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9388|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8427|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7862|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8411|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ HscxVersion函数代码示例

示例1: setup_saphir

示例2: setup_sportster

示例3: setup_avm_a1_pcmcia

示例4: hscxisac_setup

示例5: setup_mic

示例6: __initfunc

示例7: setup_sedlbauer

示例8: setup_telespci

示例9: setup_teles3

示例10: setup_diva

示例11: setup_gazel

示例12: setup_ix1micro

示例13: setup_diva_common

示例14: setup_asuscom

示例15: setup_diva

示例16: setup_niccy

请发表评论

全部评论

上一篇：

下一篇：

dphi-official/Machine_Learning_Bootcamp

tianli/matlab_offscreen: Matlab offscree

win7系统注册表编辑器打开的操作方法

これがマストドンだ！使い方からインスタ

芙蓉王（硬领航）多少钱一包？

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053

客服电话

电子邮件

C++ HscxVersion函数代码示例

示例1: setup_saphir

示例2: setup_sportster

示例3: setup_avm_a1_pcmcia

示例4: hscxisac_setup

示例5: setup_mic

示例6: __initfunc

示例7: setup_sedlbauer

示例8: setup_telespci

示例9: setup_teles3

示例10: setup_diva

示例11: setup_gazel

示例12: setup_ix1micro

示例13: setup_diva_common

示例14: setup_asuscom

示例15: setup_diva

示例16: setup_niccy

请发表评论

全部评论

上一篇：

下一篇：

dphi-official/Machine_Learning_Bootcamp

tianli/matlab_offscreen: Matlab offscree

win7系统注册表编辑器打开的操作方法

これがマストドンだ！ 使い方からインスタ

芙蓉王（硬领航）多少钱一包？

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053

これがマストドンだ！使い方からインスタ