本文整理汇总了C++中I2CStop函数的典型用法代码示例。如果您正苦于以下问题：C++ I2CStop函数的具体用法？C++ I2CStop怎么用？C++ I2CStop使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了I2CStop函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: ImuRead
void ImuRead(ImuRegisters & r, bool bDoMag)
{
I2CStart( 0x68,false,2);
I2CSend(0x3B);//59
I2CStop(20);
rv=I2CReadBuf(0x68, (PBYTE)&r, 14);
if(bDoMag)
{
I2CStart(MAGADDR,false,2);
I2CSend(0x03);
I2CStop(20);
rv2=I2CReadBuf(MAGADDR, (PBYTE)&r.mx, 6);
I2CStart(MAGADDR,false,2);
I2CSend(0x0A);
I2CSend(0x01);
I2CStop(20);
}
else
{
r.mx=0;
r.my=0;
r.mz=0;
}
}
开发者ID:pbreed，项目名称:SBCAR，代码行数:29，代码来源:imu.cpp
示例2: i2c_recv
char i2c_recv(char addr, char count)
{
char byteptr, byte_in;
if (I2CStart()) return 1;
i2cError = 0;
byteptr = 0;
byte_in = addr | 0x01;
if (ByteOutI2C(byte_in))
{
if (i2cError == I2CERR_NAK) I2CStop();
return i2cError;
}
while(count)
{
count-=1;
if (count) {
byte_in = I2CByteIn(0);
} else {
byte_in = I2CByteIn(1); /* No ACK during last byte */
}
i2cReceiveBuffer[byteptr] = byte_in;
byteptr++;
}
I2CStop();
return (i2cError ? 1 : 0);
}
开发者ID:TronicLabs，项目名称:sdcc，代码行数:32，代码来源:i2c390.c
示例3: I2CSendStop
char I2CSendStop(char addr, char count, char send_stop)
{
char byteptr, byte_out;
if (I2CStart()) return 1;
i2cError = 0;
byte_out = addr & 0xfe; /* Ensure that it's a write address */
count++; /* Include slave address to byte count */
byteptr = 0;
while(count)
{
if (ByteOutI2C(byte_out))
{
if (i2cError == I2CERR_NAK && send_stop) I2CStop();
return i2cError;
}
byte_out = i2cTransmitBuffer[byteptr];
byteptr++;
count--;
}
if (send_stop) I2CStop();
return 0;
}
开发者ID:TronicLabs，项目名称:sdcc，代码行数:25，代码来源:i2c390.c
示例4: I2CReadDate
/******读SD2200实时数据寄存器******/
void I2CReadDate(void)
{
uchar m,tmp;
if(!I2CStart())return;
I2CSendByte(0x65,1);//从年开始读取数据
if(!I2CWaitAck()){I2CStop();return;}
for(m=0;m<7;m++)
{
timeBuf[m]=I2CReceiveByte();
if (m!=6) //最后一个数据不应答
{
I2CAck();
}
}
I2CNoAck();
I2CStop();
/*
for(m=0;m<SEND_TIME_LEN;m++)
{ //BCD处理
tmp=timeBuf[m+4]/16;
sendTimeBuf[m]=timeBuf[m+4]%16;
sendTimeBuf[m]=sendTimeBuf[m]+tmp*10;
showTimeBuf[2*m]=timeBuf[m+4]/16;
showTimeBuf[2*m+1]=timeBuf[m+4]%16;
}*/
//展开处理 因小时需单独处理 12点以上的需减去40
tmp=timeBuf[4]/16;
sendTimeBuf[0]=timeBuf[4]%16;
sendTimeBuf[0]=sendTimeBuf[0]+tmp*10;
if(sendTimeBuf[0]>=40){
sendTimeBuf[0]-=40;
}
showTimeBuf[0]=sendTimeBuf[0]/10;
showTimeBuf[1]=sendTimeBuf[0]%10;
tmp=timeBuf[5]/16;
sendTimeBuf[1]=timeBuf[5]%16;
sendTimeBuf[1]=sendTimeBuf[1]+tmp*10;
showTimeBuf[2]=sendTimeBuf[1]/10;
showTimeBuf[3]=sendTimeBuf[1]%10;
tmp=timeBuf[6]/16;
sendTimeBuf[2]=timeBuf[6]%16;
sendTimeBuf[2]=sendTimeBuf[2]+tmp*10;
showTimeBuf[4]=sendTimeBuf[2]/10;
showTimeBuf[5]=sendTimeBuf[2]%10;
//年月日
tmp=timeBuf[0]/16;
sendTimeBuf[3]=timeBuf[0]%16;
sendTimeBuf[3]=sendTimeBuf[3]+tmp*10;
tmp=timeBuf[1]/16;
sendTimeBuf[4]=timeBuf[1]%16;
sendTimeBuf[4]=sendTimeBuf[4]+tmp*10;
tmp=timeBuf[2]/16;
sendTimeBuf[5]=timeBuf[2]%16;
sendTimeBuf[5]=sendTimeBuf[5]+tmp*10;
}
开发者ID:vvdeng，项目名称:MinerStaffManagerSystem，代码行数:60，代码来源:sd2200.c
示例5: main
void main()
{
/* Buffer where we will read/write our data */
unsigned char I2CData[] = {0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x09, 0x00};
unsigned char i;
/* Initialize I2C Port */
I2CInit();
/* Send Start condition */
I2CStart();
/* Send DS1307 slave address with write operation */
I2CSend(0xD0);
/* Send subaddress 0x00, we are writing to this location */
I2CSend(0x00);
/* Loop to write 8 bytes */
for (i = 0; i < 8; i++)
{
/* send I2C data one by one */
//I2CSend(I2CInitval[i]);
I2CSend(I2CData[i]);
}
/* Send a stop condition - as transfer finishes */
I2CStop();
/* We will now read data from DS1307 */
/* Reading for a memory based device always starts with a dummy write */
/* Send a start condition */
I2CStart();
/* Send slave address with write */
I2CSend(0xD0);
/* Send address for dummy write operation */
/* this address is actually where we are going to read from */
I2CSend(0x00);
/* Send a repeated start, after a dummy write to start reading */
I2CRestart();
/* send slave address with read bit set */
I2CSend(0xD1);
/* Loop to read 8 bytes from I2C slave */
for (i = 8; i > 0; i--) {
/* read a byte */
I2CData[i] = I2CRead();
/* ACK if its not the last byte to read */
/* if its the last byte then send a NAK */
if (i - 1)
I2CAck();
else
I2CNak();
}
/* Send stop */
I2CStop();
/* end of program */
while(1);
}
开发者ID:adinovus，项目名称:pic，代码行数:55，代码来源:i2c.c
示例6: read_register
BYTE read_register(BYTE address,BYTE regist)
{
I2CStart();
I2CWrite(address | 0);
I2CWrite(regist);
I2CRestart();
I2CWrite(address | 1);
BYTE data = I2CRead(1);
I2CStop();
I2CStop();
I2CStop();
return data;
}
开发者ID:HackathonRome，项目名称:xmas-tales，代码行数:13，代码来源:i2c_devices.c
示例7: I2CDataCom
void I2CDataCom(unsigned char read_write,unsigned char chipAdr,unsigned char* regAdr,unsigned char* data,unsigned char nbData,unsigned char nbReg) {
/*Standard polling I2C function for read and write*/
unsigned char i;
I2CStart();
//Send adress of MPU shifted to 1 to the left in order to send Write command
if(I2CTransfer(chipAdr)) {
I2CStop();
return;
}
//send address register
for(i=0;i<nbReg;i++) {
if(I2CTransfer(regAdr[i])) {
I2CStop();
return;
}
}
if(read_write) { //If a read request is needed
//send restart command
I2CRestart();
//resend the address of MPU and add READ command
if(I2CTransfer(chipAdr|I2C_READ)) {
I2CStop();
return;
}
for(i=0;i<nbData;i++) {
data[i] = I2CReceive();
if(i == nbData-1) {
//Generate ACK for all datas exept the last
I2CACKDis(); //send a nack
I2CAckGen(); //generate ACK procedure
}
else {
//Generate NACK for the last value
I2CACKEn();
I2CAckGen();
}
}
} else {
for(i=0;i<nbData;i++)
//send datas
if(I2CTransfer(data[i]))
break; //testing if acknowledge has been received
}
//send STOP
I2CStop();
}
开发者ID:moon6x3，项目名称:robotPilot，代码行数:49，代码来源:communication.c
示例8: WriteReg
void WriteReg(BYTE rg, BYTE val)
{
I2CStart( 0x68,false,2);
I2CSend(rg);
I2CSend(val);
I2CStop(20);
}
开发者ID:pbreed，项目名称:SBCAR，代码行数:7，代码来源:imu.cpp
示例9: DS2482WriteConfig
unsigned char DS2482WriteConfig(unsigned char config)
{
unsigned char read_config;
I2CStart();
I2CSendAddress(DS2482_I2C_ADDR, I2C_Direction_Transmitter);
I2CWrite(DS2482_CMD_WCFG);
I2CWrite(config | (~config << 4));
I2CRestart();
I2CSendAddress(DS2482_I2C_ADDR, I2C_Direction_Receiver);
I2CNotAck();
I2CStop();
read_config = I2CRead();
// check for failure due to incorrect read back
if (config != read_config)
{
DS2482Reset();
return false;
}
return true;
}
开发者ID:luismaduro，项目名称:uCLibraries，代码行数:25，代码来源:DS2482.c
示例10: OneWireWriteByte
void OneWireWriteByte(unsigned char sendbyte)
{
unsigned char status;
int poll_count = 0;
I2CStart();
I2CSendAddress(DS2482_I2C_ADDR, I2C_Direction_Transmitter);
I2CWrite(DS2482_CMD_1WWB);
I2CWrite(sendbyte);
I2CRestart();
I2CSendAddress(DS2482_I2C_ADDR, I2C_Direction_Receiver);
I2CAck();
do
{
status = I2CRead();
}
while ((status & DS2482_STATUS_1WB) && (poll_count++ < POLL_LIMIT));
I2CNotAck();
I2CStop();
status = I2CRead();
if (poll_count >= POLL_LIMIT)
DS2482Reset();
}
开发者ID:luismaduro，项目名称:uCLibraries，代码行数:27，代码来源:DS2482.c
示例11: DS1307Write
uint8_t DS1307Write(uint8_t address,uint8_t data)
{
uint8_t res; //result
//Start
I2CStart();
//SLA+W
res=I2CWriteByte(0b11010000); //DS1307 address + W
//Error
if(!res) return FALSE;
//Now send the address of required register
res=I2CWriteByte(address);
//Error
if(!res) return FALSE;
//Now write the value
res=I2CWriteByte(data);
//Error
if(!res) return FALSE;
//STOP
I2CStop();
return TRUE;
}
开发者ID:ariejan，项目名称:ClockMeister2100，代码行数:30，代码来源:ds1307.c
示例12: TM1651_Init
void TM1651_Init(uint8_t backlight)
{
I2CStart();
I2CWritebyte(0x88| backlight); //显示控制命令，开显示，脉冲宽度为11/16 0x08表示显示0|0x08|0x00
//脉冲宽度 1/16-0b000 2/16-0b001 4/16-0b010 10/16-0b011 12/16-0b101 13/16-0b110 14/16-0b111
I2CStop();
}
开发者ID:Williamzhangtw，项目名称:8586S，代码行数:7，代码来源:TM1651.c
示例13: I2CWriteStatus
/*写SD2200状态寄存器命令*/
void I2CWriteStatus(void)
{
if(!I2CStart())return;
I2CSendByte(0x60,1); //发送SD2200状态寄存器_1命令
if(!I2CWaitAck()){I2CStop();return;}
// I2CSendByte(0x03,0); //IC进行复位初始化,24小时制
I2CSendByte(0x02,0); //IC不进行复位初始化,24小时制
I2CWaitAck();
I2CStop();
I2CStart();
I2CSendByte(0x62,1); //发送SD2200状态寄存器_2命令
I2CWaitAck();
I2CSendByte(0x00,0); //清TEST位,禁止中断输出
I2CWaitAck();
I2CStop();
}
开发者ID:vvdeng，项目名称:MinerStaffManagerSystem，代码行数:17，代码来源:sd2200.c
示例14: AT24_read
uint8_t AT24_read(struct eeprom_data *data) {
uint8_t ret = ESUCCESS;
uint8_t counter = 0;
uint8_t *p;
struct eeprom_data *tmp = (struct eeprom_data *)malloc(sizeof(tmp));
memset(tmp, 0, EEPROM_MU_WR_SIZE);
// Send EEPROM's i2c address + raise read flag
ret = I2CStart(at24_addr | TW_READ);
if (ret > 0)
return ret;
// Read one page
do {
if (counter + 1 == EEPROM_MU_WR_SIZE)
ret = I2CReadByte(p, I2C_NOACK);
else
ret = I2CReadByte(p, I2C_ACK);
if (ret > 0)
return EEEPDATAREAD;
tmp += *p++;
counter++;
} while (counter != EEPROM_MU_WR_SIZE);
I2CStop();
data = tmp;
return ESUCCESS;
}
开发者ID:gerbert，项目名称:ws2，代码行数:30，代码来源:24c32.c
示例15: BaroTest
void BaroTest(void)
{
uint8 r;
TxString("\r\nBarometer test\r\n");
if ( !_UseBaro ) goto BAerror;
if ( BaroType == BARO_ID_BMP085 )
TxString("Type:\tBMP085\r\n");
else
TxString("Type:\tSMD500\r\n");
if( !StartBaroADC(BARO_PRESS) ) goto BAerror;
Delay1mS(BARO_PRESS_TIME);
r = ReadValueFromBaro();
TxString("Press: \t");
TxVal32((int32)BaroVal, 0, 0);
if( !StartBaroADC(BaroTemp) ) goto BAerror;
Delay1mS(BARO_TEMP_TIME);
r = ReadValueFromBaro();
TxString("\tTemp: ");
TxVal32((int32)BaroVal, 0, 0);
TxNextLine();
TxNextLine();
return;
BAerror:
I2CStop();
TxString("FAIL\r\n");
} // BaroTest
开发者ID:gke，项目名称:UAVP，代码行数:32，代码来源:pu-test.c
示例16: TM1650_CMD
void TM1650_CMD(uchar data)
{
I2CStart();
I2CWrByte(data);
I2Cask();
I2CStop();
}
开发者ID:sparrow1058，项目名称:zwatch，代码行数:7，代码来源:tm1650.c
示例17: tda731xSetSpeakers
void tda731xSetSpeakers(void)
{
int8_t spFrontLeft = 0;
int8_t spFrontRight = 0;
int8_t spRearLeft = 0;
int8_t spRearRight = 0;
if (sndPar[MODE_SND_BALANCE].value > 0) {
spFrontLeft -= sndPar[MODE_SND_BALANCE].value;
spRearLeft -= sndPar[MODE_SND_BALANCE].value;
} else {
spFrontRight += sndPar[MODE_SND_BALANCE].value;
spRearRight += sndPar[MODE_SND_BALANCE].value;
}
if (sndPar[MODE_SND_FRONTREAR].value > 0) {
spRearLeft -= sndPar[MODE_SND_FRONTREAR].value;
spRearRight -= sndPar[MODE_SND_FRONTREAR].value;
} else {
spFrontLeft += sndPar[MODE_SND_FRONTREAR].value;
spFrontRight += sndPar[MODE_SND_FRONTREAR].value;
}
I2CStart(TDA731X_I2C_ADDR);
I2CWriteByte(TDA731X_SP_REAR_LEFT | -spRearLeft);
I2CWriteByte(TDA731X_SP_REAR_RIGHT | -spRearRight);
I2CWriteByte(TDA731X_SP_FRONT_LEFT | -spFrontLeft);
I2CWriteByte(TDA731X_SP_FRONT_RIGHT | -spFrontRight);
I2CStop();
return;
}
开发者ID:WiseLord，项目名称:volmatrix，代码行数:32，代码来源:tda731x.c
示例18: ks0066Init
void ks0066Init(void)
{
I2CStart(PCF8574_ADDR, I2C_WRITE);
i2cData &= ~PCF8574_BL_LINE;
i2cData &= ~PCF8574_E_LINE;
i2cData &= ~PCF8574_RW_LINE;
i2cData &= ~PCF8574_RS_LINE;
ks0066SetData(KS0066_FUNCTION | KS0066_8BIT); /* Init data */
ks0066WriteStrob();
delay_ms(20);
ks0066WriteStrob();
delay_ms(5);
ks0066WriteStrob();
delay_us(120);
ks0066WriteStrob();
i2cData &= ~PCF8574_RW_LINE;
i2cData &= ~PCF8574_RS_LINE;
ks0066SetData(KS0066_FUNCTION);
ks0066WriteStrob();
I2CStop();
ks0066WriteCommand(KS0066_FUNCTION | KS0066_2LINES);
ks0066WriteCommand(KS0066_DISPLAY | KS0066_DISPAY_ON);
ks0066WriteCommand(KS0066_CLEAR);
delay_ms(2);
ks0066WriteCommand(KS0066_SET_MODE | KS0066_INC_ADDR);
return;
}
开发者ID:nilluchko，项目名称:projects-stm32，代码行数:34，代码来源:ks0066.c
示例19: accelWriteReg
/*
Write a value to a register on ADXL345
*/
void accelWriteReg(const Accel *a, int reg, BYTE val){
int I2C = a->I2C;
sendStart(I2C); // start transaction
sendByte(I2C, a->write); // write accel device
sendByte(I2C, reg); // accel device register
sendByte(I2C, val); // value
I2CStop(I2C);
}
开发者ID:conorpp，项目名称:school，代码行数:11，代码来源:main.c
示例20: I2C_StopTransfer
/**
* Invokes an I2C stop condition
*
*/
void I2C_StopTransfer()
{
// Send the Stop signal
I2CStop(I2C1);
// Wait for the signal to complete
while (!(I2CGetStatus(I2C1) & I2C_STOP));
}
开发者ID:andrade824，项目名称:NoiseBlaster32，代码行数:12，代码来源:i2c.c
注：本文中的I2CStop函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论