C++ I915_WRITE_NOTRACE函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中I915_WRITE_NOTRACE函数的典型用法代码示例。如果您正苦于以下问题：C++ I915_WRITE_NOTRACE函数的具体用法？C++ I915_WRITE_NOTRACE怎么用？C++ I915_WRITE_NOTRACE使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了I915_WRITE_NOTRACE函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: get_data

static int get_data(void *data)
{
	struct intel_gmbus *bus = data;
	struct drm_i915_private *dev_priv = bus->dev_priv;
	u32 reserved = get_reserved(bus);
	I915_WRITE_NOTRACE(bus->gpio_reg, reserved | GPIO_DATA_DIR_MASK);
	I915_WRITE_NOTRACE(bus->gpio_reg, reserved);
	return (I915_READ_NOTRACE(bus->gpio_reg) & GPIO_DATA_VAL_IN) != 0;
}

开发者ID:joeylintw，项目名称:s5pv210_linux_kernel，代码行数:9，代码来源:intel_i2c.c

示例2: get_clock

static int get_clock(void *data)
{
	struct intel_gpio *gpio = data;
	struct drm_i915_private *dev_priv = gpio->dev_priv;
	u32 reserved = get_reserved(gpio);
	I915_WRITE_NOTRACE(gpio->reg, reserved | GPIO_CLOCK_DIR_MASK);
	I915_WRITE_NOTRACE(gpio->reg, reserved);
	return (I915_READ_NOTRACE(gpio->reg) & GPIO_CLOCK_VAL_IN) != 0;
}

开发者ID:125radheyshyam，项目名称:linux，代码行数:9，代码来源:intel_i2c.c

示例3: get_data

static int get_data(device_t adapter)
{
	struct intel_iic_softc *sc = device_get_softc(adapter);
	struct intel_gmbus *bus = sc->bus;
	struct drm_i915_private *dev_priv = bus->dev_priv;
	u32 reserved = get_reserved(bus);
	I915_WRITE_NOTRACE(bus->gpio_reg, reserved | GPIO_DATA_DIR_MASK);
	I915_WRITE_NOTRACE(bus->gpio_reg, reserved);
	return (I915_READ_NOTRACE(bus->gpio_reg) & GPIO_DATA_VAL_IN) != 0;
}

开发者ID:kwitaszczyk，项目名称:freebsd，代码行数:10，代码来源:intel_iic.c

示例4: gen6_do_reset

static int gen6_do_reset(struct drm_device *dev, u8 flags)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	int	ret;
	unsigned long irqflags;

	spin_lock_irqsave(&dev_priv->gt_lock, irqflags);

	

	I915_WRITE_NOTRACE(GEN6_GDRST, GEN6_GRDOM_FULL);

	
	ret = wait_for((I915_READ_NOTRACE(GEN6_GDRST) & GEN6_GRDOM_FULL) == 0, 500);

	
	if (dev_priv->forcewake_count)
		dev_priv->display.force_wake_get(dev_priv);
	else
		dev_priv->display.force_wake_put(dev_priv);

	
	dev_priv->gt_fifo_count = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES);

	spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags);
	return ret;
}

开发者ID:mjduddin，项目名称:B14CKB1RD_kernel_m8，代码行数:27，代码来源:i915_drv.c

示例5: intel_iicbb_getscl

static int
intel_iicbb_getscl(device_t idev)
{
	struct intel_iic_softc *sc;
	struct drm_i915_private *dev_priv;
	u32 reserved;

	sc = device_get_softc(idev);
	dev_priv = sc->drm_dev->dev_private;

	reserved = intel_iic_get_reserved(idev);

	I915_WRITE_NOTRACE(sc->reg, reserved | GPIO_CLOCK_DIR_MASK);
	I915_WRITE_NOTRACE(sc->reg, reserved);
	return ((I915_READ_NOTRACE(sc->reg) & GPIO_CLOCK_VAL_IN) != 0);
}

开发者ID:AhmadTux，项目名称:freebsd，代码行数:16，代码来源:intel_iic.c

示例6: gen6_do_reset

static int gen6_do_reset(struct drm_device *dev, u8 flags)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	int	ret;
	unsigned long irqflags;

	/* Hold gt_lock across reset to prevent any register access
	 * with forcewake not set correctly
	 */
	spin_lock_irqsave(&dev_priv->gt_lock, irqflags);

	/* Reset the chip */

	/* GEN6_GDRST is not in the gt power well, no need to check
	 * for fifo space for the write or forcewake the chip for
	 * the read
	 */
	I915_WRITE_NOTRACE(GEN6_GDRST, GEN6_GRDOM_FULL);

	/* Spin waiting for the device to ack the reset request */
	ret = wait_for((I915_READ_NOTRACE(GEN6_GDRST) & GEN6_GRDOM_FULL) == 0, 500);

	/* If reset with a user forcewake, try to restore, otherwise turn it off */
	if (dev_priv->forcewake_count)
		dev_priv->display.force_wake_get(dev_priv);
	else
		dev_priv->display.force_wake_put(dev_priv);

	/* Restore fifo count */
	dev_priv->gt_fifo_count = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES);

	spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags);
	return ret;
}

开发者ID:jebtang，项目名称:mortar，代码行数:34，代码来源:i915_drv.c

示例7: __gen6_gt_force_wake_put

void
__gen6_gt_force_wake_put(struct drm_i915_private *dev_priv)
{

	I915_WRITE_NOTRACE(FORCEWAKE, 0);
	/* The below doubles as a POSTING_READ */
	gen6_gt_check_fifodbg(dev_priv);
}

开发者ID:ngkaho1234，项目名称:freebsd，代码行数:8，代码来源:i915_drv.c

示例8: gen6_gt_check_fifodbg

static void gen6_gt_check_fifodbg(struct drm_i915_private *dev_priv)
{
	u32 gtfifodbg;
	gtfifodbg = I915_READ_NOTRACE(GTFIFODBG);
	if (WARN(gtfifodbg & GT_FIFO_CPU_ERROR_MASK,
	     "MMIO read or write has been dropped %x\n", gtfifodbg))
		I915_WRITE_NOTRACE(GTFIFODBG, GT_FIFO_CPU_ERROR_MASK);
}

开发者ID:stefanreinauer，项目名称:i915tool，代码行数:8，代码来源:i915_drv.c

示例9: ilk_dummy_write

static void
ilk_dummy_write(struct drm_i915_private *dev_priv)
{
	/* WaIssueDummyWriteToWakeupFromRC6: Issue a dummy write to wake up the
	 * chip from rc6 before touching it for real. MI_MODE is masked, hence
	 * harmless to write 0 into. */
	I915_WRITE_NOTRACE(MI_MODE, 0);
}

开发者ID:eyberg，项目名称:rumpkernel-netbsd-src，代码行数:8，代码来源:i915_drv.c

示例10: __gen6_gt_force_wake_mt_put

void
__gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv)
{

	I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_DISABLE(1));
	/* The below doubles as a POSTING_READ */
	gen6_gt_check_fifodbg(dev_priv);
}

开发者ID:ngkaho1234，项目名称:freebsd，代码行数:8，代码来源:i915_drv.c

示例11: __gen6_gt_force_wake_mt_get

void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv)
{
	int count;

	count = 0;
	while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_MT_ACK) & 1))
		udelay(10);

	I915_WRITE_NOTRACE(FORCEWAKE_MT, (1<<16) | 1);
	POSTING_READ(FORCEWAKE_MT);

	count = 0;
	while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_MT_ACK) & 1) == 0)
		udelay(10);
}

开发者ID:jebtang，项目名称:mortar，代码行数:15，代码来源:i915_drv.c

示例12: set_data

static void set_data(void *data, int state_high)
{
	struct intel_gpio *gpio = data;
	struct drm_i915_private *dev_priv = gpio->dev_priv;
	u32 reserved = get_reserved(gpio);
	u32 data_bits;

	if (state_high)
		data_bits = GPIO_DATA_DIR_IN | GPIO_DATA_DIR_MASK;
	else
		data_bits = GPIO_DATA_DIR_OUT | GPIO_DATA_DIR_MASK |
			GPIO_DATA_VAL_MASK;

	I915_WRITE_NOTRACE(gpio->reg, reserved | data_bits);
	POSTING_READ(gpio->reg);
}

开发者ID:125radheyshyam，项目名称:linux，代码行数:16，代码来源:intel_i2c.c

示例13: __gen6_gt_force_wake_mt_get

void
__gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv)
{
	int count;

	count = 0;
	while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_MT_ACK) & 1))
		DELAY(10);

	I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_ENABLE(1));
	POSTING_READ(FORCEWAKE_MT);

	count = 0;
	while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_MT_ACK) & 1) == 0)
		DELAY(10);
}

开发者ID:ngkaho1234，项目名称:freebsd，代码行数:16，代码来源:i915_drv.c

示例14: __gen6_gt_force_wake_get

void
__gen6_gt_force_wake_get(struct drm_i915_private *dev_priv)
{
	int count;

	count = 0;
	while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_ACK) & 1))
		DELAY(10);

	I915_WRITE_NOTRACE(FORCEWAKE, 1);
	POSTING_READ(FORCEWAKE);

	count = 0;
	while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_ACK) & 1) == 0)
		DELAY(10);
}

开发者ID:ngkaho1234，项目名称:freebsd，代码行数:16，代码来源:i915_drv.c

示例15: set_clock

static void set_clock(void *data, int state_high)
{
	struct intel_gmbus *bus = data;
	struct drm_i915_private *dev_priv = bus->dev_priv;
	u32 reserved = get_reserved(bus);
	u32 clock_bits;

	if (state_high)
		clock_bits = GPIO_CLOCK_DIR_IN | GPIO_CLOCK_DIR_MASK;
	else
		clock_bits = GPIO_CLOCK_DIR_OUT | GPIO_CLOCK_DIR_MASK |
			GPIO_CLOCK_VAL_MASK;

	I915_WRITE_NOTRACE(bus->gpio_reg, reserved | clock_bits);
	POSTING_READ(bus->gpio_reg);
}

开发者ID:joeylintw，项目名称:s5pv210_linux_kernel，代码行数:16，代码来源:intel_i2c.c

示例16: vlv_force_wake_get

void vlv_force_wake_get(struct drm_i915_private *dev_priv)
{
	int count;

	count = 0;

	/* Already awake? */
	if ((I915_READ(0x130094) & 0xa1) == 0xa1)
		return;

	I915_WRITE_NOTRACE(FORCEWAKE_VLV, 0xffffffff);
	POSTING_READ(FORCEWAKE_VLV);

	count = 0;
	while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_ACK_VLV) & 1) == 0)
		DELAY(10);
}

开发者ID:ngkaho1234，项目名称:freebsd，代码行数:17，代码来源:i915_drv.c

示例17: set_data

static void set_data(device_t adapter, int state_high)
{
	struct intel_iic_softc *sc = device_get_softc(adapter);
	struct intel_gmbus *bus = sc->bus;
	struct drm_i915_private *dev_priv = bus->dev_priv;
	u32 reserved = get_reserved(bus);
	u32 data_bits;

	if (state_high)
		data_bits = GPIO_DATA_DIR_IN | GPIO_DATA_DIR_MASK;
	else
		data_bits = GPIO_DATA_DIR_OUT | GPIO_DATA_DIR_MASK |
			GPIO_DATA_VAL_MASK;

	I915_WRITE_NOTRACE(bus->gpio_reg, reserved | data_bits);
	POSTING_READ(bus->gpio_reg);
}

开发者ID:kwitaszczyk，项目名称:freebsd，代码行数:17，代码来源:intel_iic.c

示例18: intel_iicbb_setscl

static void
intel_iicbb_setscl(device_t idev, int val)
{
	struct intel_iic_softc *sc;
	struct drm_i915_private *dev_priv;
	u32 clock_bits, reserved;

	sc = device_get_softc(idev);
	dev_priv = sc->drm_dev->dev_private;

	reserved = intel_iic_get_reserved(idev);
	if (val)
		clock_bits = GPIO_CLOCK_DIR_IN | GPIO_CLOCK_DIR_MASK;
	else
		clock_bits = GPIO_CLOCK_DIR_OUT | GPIO_CLOCK_DIR_MASK |
		    GPIO_CLOCK_VAL_MASK;

	I915_WRITE_NOTRACE(sc->reg, reserved | clock_bits);
	POSTING_READ(sc->reg);
}

开发者ID:AhmadTux，项目名称:freebsd，代码行数:20，代码来源:intel_iic.c

示例19: intel_iicbb_setsda

static void
intel_iicbb_setsda(device_t idev, int val)
{
	struct intel_iic_softc *sc;
	struct drm_i915_private *dev_priv;
	u32 reserved;
	u32 data_bits;

	sc = device_get_softc(idev);
	dev_priv = sc->drm_dev->dev_private;

	reserved = intel_iic_get_reserved(idev);
	if (val)
		data_bits = GPIO_DATA_DIR_IN | GPIO_DATA_DIR_MASK;
	else
		data_bits = GPIO_DATA_DIR_OUT | GPIO_DATA_DIR_MASK |
		    GPIO_DATA_VAL_MASK;

	I915_WRITE_NOTRACE(sc->reg, reserved | data_bits);
	POSTING_READ(sc->reg);
}

开发者ID:AhmadTux，项目名称:freebsd，代码行数:21，代码来源:intel_iic.c

示例20: vlv_force_wake_put

void vlv_force_wake_put(struct drm_i915_private *dev_priv)
{
	I915_WRITE_NOTRACE(FORCEWAKE_VLV, 0xffff0000);
	/* FIXME: confirm VLV behavior with Punit folks */
	POSTING_READ(FORCEWAKE_VLV);
}

开发者ID:ngkaho1234，项目名称:freebsd，代码行数:6，代码来源:i915_drv.c

注：本文中的I915_WRITE_NOTRACE函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ IAlloc_Free函数代码示例发布时间：2022-05-30

C++ I915_WRITE8函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18259|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9673|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8177|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8548|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8456|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9388|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8427|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7862|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8411|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ I915_WRITE_NOTRACE函数代码示例

示例1: get_data

示例2: get_clock

示例3: get_data

示例4: gen6_do_reset

示例5: intel_iicbb_getscl

示例6: gen6_do_reset

示例7: __gen6_gt_force_wake_put

示例8: gen6_gt_check_fifodbg

示例9: ilk_dummy_write

示例10: __gen6_gt_force_wake_mt_put

示例11: __gen6_gt_force_wake_mt_get

示例12: set_data

示例13: __gen6_gt_force_wake_mt_get

示例14: __gen6_gt_force_wake_get

示例15: set_clock

示例16: vlv_force_wake_get

示例17: set_data

示例18: intel_iicbb_setscl

示例19: intel_iicbb_setsda

示例20: vlv_force_wake_put

请发表评论

全部评论

上一篇：

下一篇：

微信小程序学习7--小程序架构分析

ufna/VaOceanMobile: Ocean shader created

armancodv/building-energy-model-matlab:

FGRibreau/import-tweets-to-mastodon: How

Delphi 2009 超前预知

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053