本文整理汇总了C++中IF函数的典型用法代码示例。如果您正苦于以下问题：C++ IF函数的具体用法？C++ IF怎么用？C++ IF使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了IF函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: IF
void *P1_0(void *__cs_param_P1_arg)
{
IF(2,0,tP1_0_1)
__CSEQ_atomic_begin();
tP1_0_1: IF(2,1,tP1_0_2)
x$w_buff1 = x$w_buff0;
tP1_0_2: IF(2,2,tP1_0_3)
x$w_buff0 = 2;
tP1_0_3: IF(2,3,tP1_0_4)
x$w_buff1_used = x$w_buff0_used;
tP1_0_4: IF(2,4,tP1_0_5)
x$w_buff0_used = (_Bool) 1;
tP1_0_5: IF(2,5,tP1_0_6)
assert(!(x$w_buff1_used && x$w_buff0_used));
tP1_0_6: IF(2,6,tP1_0_7)
x$r_buff1_thd0 = x$r_buff0_thd0;
tP1_0_7: IF(2,7,tP1_0_8)
x$r_buff1_thd1 = x$r_buff0_thd1;
tP1_0_8: IF(2,8,tP1_0_9)
x$r_buff1_thd2 = x$r_buff0_thd2;
tP1_0_9: IF(2,9,tP1_0_10)
x$r_buff0_thd2 = (_Bool) 1;
__CSEQ_atomic_end();
tP1_0_10: IF(2,10,tP1_0_11)
__CSEQ_atomic_begin();
tP1_0_11: IF(2,11,tP1_0_12)
y = 1;
__CSEQ_atomic_end();
tP1_0_12: IF(2,12,tP1_0_13)
__CSEQ_atomic_begin();
tP1_0_13: IF(2,13,tP1_0_14)
__unbuffered_p1_EAX = y;
__CSEQ_atomic_end();
tP1_0_14: IF(2,14,tP1_0_15)
__CSEQ_atomic_begin();
tP1_0_15: IF(2,15,tP1_0_16)
__unbuffered_p1_EBX = z;
__CSEQ_atomic_end();
tP1_0_16: IF(2,16,tP1_0_17)
__CSEQ_atomic_begin();
tP1_0_17: IF(2,17,tP1_0_18)
x = x$w_buff0_used && x$r_buff0_thd2 ? x$w_buff0 : x$w_buff1_used && x$r_buff1_thd2 ? x$w_buff1 : x;
tP1_0_18: IF(2,18,tP1_0_19)
x$w_buff0_used = x$w_buff0_used && x$r_buff0_thd2 ? (_Bool) 0 : x$w_buff0_used;
tP1_0_19: IF(2,19,tP1_0_20)
x$w_buff1_used = (x$w_buff0_used && x$r_buff0_thd2) || (x$w_buff1_used && x$r_buff1_thd2) ? (_Bool) 0 : x$w_buff1_used;
tP1_0_20: IF(2,20,tP1_0_21)
x$r_buff0_thd2 = x$w_buff0_used && x$r_buff0_thd2 ? (_Bool) 0 : x$r_buff0_thd2;
tP1_0_21: IF(2,21,tP1_0_22)
x$r_buff1_thd2 = (x$w_buff0_used && x$r_buff0_thd2) || (x$w_buff1_used && x$r_buff1_thd2) ? (_Bool) 0 : x$r_buff1_thd2;
__CSEQ_atomic_end();
tP1_0_22: IF(2,22,tP1_0_23)
__CSEQ_atomic_begin();
tP1_0_23: IF(2,23,tP1_0_24)
__unbuffered_cnt = __unbuffered_cnt + 1;
__CSEQ_atomic_end();
goto __exit_P1;
;
__exit_P1:
__CPROVER_assume(__cs_pc_cs[2] >= 24);
;
;
tP1_0_24:
STOP_NONVOID(24);
}
开发者ID:heryxpc，项目名称:prototype，代码行数:65，代码来源:_cs_mix041_pso.opt_false-unreach-call.c
示例2: emit
void
vec4_gs_visitor::gs_emit_vertex(int stream_id)
{
this->current_annotation = "emit vertex: safety check";
/* Haswell and later hardware ignores the "Render Stream Select" bits
* from the 3DSTATE_STREAMOUT packet when the SOL stage is disabled,
* and instead sends all primitives down the pipeline for rasterization.
* If the SOL stage is enabled, "Render Stream Select" is honored and
* primitives bound to non-zero streams are discarded after stream output.
*
* Since the only purpose of primives sent to non-zero streams is to
* be recorded by transform feedback, we can simply discard all geometry
* bound to these streams when transform feedback is disabled.
*/
if (stream_id > 0 && !nir->info->has_transform_feedback_varyings)
return;
/* If we're outputting 32 control data bits or less, then we can wait
* until the shader is over to output them all. Otherwise we need to
* output them as we go. Now is the time to do it, since we're about to
* output the vertex_count'th vertex, so it's guaranteed that the
* control data bits associated with the (vertex_count - 1)th vertex are
* correct.
*/
if (c->control_data_header_size_bits > 32) {
this->current_annotation = "emit vertex: emit control data bits";
/* Only emit control data bits if we've finished accumulating a batch
* of 32 bits. This is the case when:
*
* (vertex_count * bits_per_vertex) % 32 == 0
*
* (in other words, when the last 5 bits of vertex_count *
* bits_per_vertex are 0). Assuming bits_per_vertex == 2^n for some
* integer n (which is always the case, since bits_per_vertex is
* always 1 or 2), this is equivalent to requiring that the last 5-n
* bits of vertex_count are 0:
*
* vertex_count & (2^(5-n) - 1) == 0
*
* 2^(5-n) == 2^5 / 2^n == 32 / bits_per_vertex, so this is
* equivalent to:
*
* vertex_count & (32 / bits_per_vertex - 1) == 0
*/
vec4_instruction *inst =
emit(AND(dst_null_ud(), this->vertex_count,
brw_imm_ud(32 / c->control_data_bits_per_vertex - 1)));
inst->conditional_mod = BRW_CONDITIONAL_Z;
emit(IF(BRW_PREDICATE_NORMAL));
{
/* If vertex_count is 0, then no control data bits have been
* accumulated yet, so we skip emitting them.
*/
emit(CMP(dst_null_ud(), this->vertex_count, brw_imm_ud(0u),
BRW_CONDITIONAL_NEQ));
emit(IF(BRW_PREDICATE_NORMAL));
emit_control_data_bits();
emit(BRW_OPCODE_ENDIF);
/* Reset control_data_bits to 0 so we can start accumulating a new
* batch.
*
* Note: in the case where vertex_count == 0, this neutralizes the
* effect of any call to EndPrimitive() that the shader may have
* made before outputting its first vertex.
*/
inst = emit(MOV(dst_reg(this->control_data_bits), brw_imm_ud(0u)));
inst->force_writemask_all = true;
}
emit(BRW_OPCODE_ENDIF);
}
this->current_annotation = "emit vertex: vertex data";
emit_vertex();
/* In stream mode we have to set control data bits for all vertices
* unless we have disabled control data bits completely (which we do
* do for GL_POINTS outputs that don't use streams).
*/
if (c->control_data_header_size_bits > 0 &&
gs_prog_data->control_data_format ==
GEN7_GS_CONTROL_DATA_FORMAT_GSCTL_SID) {
this->current_annotation = "emit vertex: Stream control data bits";
set_stream_control_data_bits(stream_id);
}
this->current_annotation = NULL;
}
开发者ID:Echelon9，项目名称:mesa，代码行数:90，代码来源:brw_vec4_gs_visitor.cpp
示例3: IF
void *P2_0(void *__cs_param_P2_arg)
{
IF(3,0,tP2_0_1)
__CSEQ_atomic_begin();
tP2_0_1: IF(3,1,tP2_0_2)
y$w_buff1 = y$w_buff0;
tP2_0_2: IF(3,2,tP2_0_3)
y$w_buff0 = 1;
tP2_0_3: IF(3,3,tP2_0_4)
y$w_buff1_used = y$w_buff0_used;
tP2_0_4: IF(3,4,tP2_0_5)
y$w_buff0_used = (_Bool) 1;
tP2_0_5: IF(3,5,tP2_0_6)
assert(!(y$w_buff1_used && y$w_buff0_used));
tP2_0_6: IF(3,6,tP2_0_7)
y$r_buff1_thd0 = y$r_buff0_thd0;
tP2_0_7: IF(3,7,tP2_0_8)
y$r_buff1_thd1 = y$r_buff0_thd1;
tP2_0_8: IF(3,8,tP2_0_9)
y$r_buff1_thd2 = y$r_buff0_thd2;
tP2_0_9: IF(3,9,tP2_0_10)
y$r_buff1_thd3 = y$r_buff0_thd3;
tP2_0_10: IF(3,10,tP2_0_11)
y$r_buff1_thd4 = y$r_buff0_thd4;
tP2_0_11: IF(3,11,tP2_0_12)
y$r_buff0_thd3 = (_Bool) 1;
__CSEQ_atomic_end();
tP2_0_12: IF(3,12,tP2_0_13)
__CSEQ_atomic_begin();
tP2_0_13: IF(3,13,tP2_0_14)
__unbuffered_p2_EAX = z;
__CSEQ_atomic_end();
tP2_0_14: IF(3,14,tP2_0_15)
__CSEQ_atomic_begin();
tP2_0_15: IF(3,15,tP2_0_16)
y = y$w_buff0_used && y$r_buff0_thd3 ? y$w_buff0 : y$w_buff1_used && y$r_buff1_thd3 ? y$w_buff1 : y;
tP2_0_16: IF(3,16,tP2_0_17)
y$w_buff0_used = y$w_buff0_used && y$r_buff0_thd3 ? (_Bool) 0 : y$w_buff0_used;
tP2_0_17: IF(3,17,tP2_0_18)
y$w_buff1_used = (y$w_buff0_used && y$r_buff0_thd3) || (y$w_buff1_used && y$r_buff1_thd3) ? (_Bool) 0 : y$w_buff1_used;
tP2_0_18: IF(3,18,tP2_0_19)
y$r_buff0_thd3 = y$w_buff0_used && y$r_buff0_thd3 ? (_Bool) 0 : y$r_buff0_thd3;
tP2_0_19: IF(3,19,tP2_0_20)
y$r_buff1_thd3 = (y$w_buff0_used && y$r_buff0_thd3) || (y$w_buff1_used && y$r_buff1_thd3) ? (_Bool) 0 : y$r_buff1_thd3;
__CSEQ_atomic_end();
tP2_0_20: IF(3,20,tP2_0_21)
__CSEQ_atomic_begin();
tP2_0_21: IF(3,21,tP2_0_22)
__unbuffered_cnt = __unbuffered_cnt + 1;
__CSEQ_atomic_end();
goto __exit_P2;
;
__exit_P2:
__CPROVER_assume(__cs_pc_cs[3] >= 22);
;
;
tP2_0_22:
STOP_NONVOID(22);
}
开发者ID:heryxpc，项目名称:prototype，代码行数:59，代码来源:_cs_mix017_rmo.opt_false-unreach-call.c
示例4: SignalGenerator_Init
void* DLLEXPORT SignalGenerator_Init ( int hParentInstrumentHandle , ViRsrc szRsrcAddress , int *vhInstrumentHandle , int *InstrumentConnectStatus , int *InstrumentChannelsQuantity )
{
STD_ERROR StdError = {0};
tsHandle *pLocalHandle = {0};
CmtTSVHandle handle = 0;
int supported = 0;
tsSTD_CallBackSet tSTD_CallBackSet = {0};
double lfTimeout = 0.0,
lfStateFileDelay = 1.0,
lfStateFileTimeout = 10.0,
lfDefaultTimeout = 5.0;
IF (( szRsrcAddress == NULL ) , "Address string is empty" );
if ( hParentInstrumentHandle == 0 )
{
CHK_CMT ( CmtNewTSV ( sizeof(tsHandle) , &handle ));
}
else
handle = hParentInstrumentHandle;
if ( vhInstrumentHandle )
*vhInstrumentHandle = handle;
CHK_CMT ( CmtGetTSVPtr ( handle , &pLocalHandle ));
if ( pLocalHandle->defaultRM == 0 )
{
CHK_VSA ( viOpenDefaultRM (&(pLocalHandle->defaultRM)));
}
if ( pLocalHandle->sessionHandle == 0 )
{
CHK_VSA ( viOpen ( pLocalHandle->defaultRM , szRsrcAddress , VI_NULL, VI_NULL, &(pLocalHandle->sessionHandle)));
}
WaitForOperationCompletion( pLocalHandle->sessionHandle , 20.0 , 0.5 );
CHK_VSA ( viSetAttribute ( pLocalHandle->sessionHandle , VI_ATTR_TMO_VALUE , 500 ));
FREE_STDERR_COPY_ERR( Equipment_IsSupported ( pLocalHandle->sessionHandle , NULL , NULL , NULL , &supported , &pLocalHandle ));
IF (( supported == 0 ) , "This device has not supported." );
FREE_STDERR_COPY_ERR( Equipment_Info ( pLocalHandle->sessionHandle , NULL , &pLocalHandle->pVendor , &pLocalHandle->pSerialNumber , &pLocalHandle->pModel , &pLocalHandle->pFirmware ));
STDF_UPDATE_CALLBACK_DATA(pLocalHandle->ptCallbacks);
viPrintf( pLocalHandle->sessionHandle ,"*CLS\n" );
STDF_CONFIG_VALUE("Timeout", VAL_DOUBLE , 1 , lfTimeout , lfDefaultTimeout );
if ( lfTimeout == 0.0 )
lfTimeout = lfDefaultTimeout;
viSetAttribute ( pLocalHandle->sessionHandle , VI_ATTR_TMO_VALUE , (lfTimeout*1E3) );
STDF_CONFIG_VALUE("OPC_Timeout", VAL_DOUBLE , 1 , (pLocalHandle->lfTimeout) , lfDefaultTimeout );
if ( pLocalHandle->lfTimeout == 0.0 )
pLocalHandle->lfTimeout = lfDefaultTimeout;
STDF_CONFIG_VALUE("OPC_LowLevel_Timeout", VAL_DOUBLE , 1 , (pLocalHandle->lfOpcLowLevelTimeout) , lfDefaultTimeout );
if ( pLocalHandle->lfOpcLowLevelTimeout == 0.0 )
pLocalHandle->lfOpcLowLevelTimeout = lfDefaultTimeout;
STDF_CONFIG_VALUE("State_File_Timeout", VAL_DOUBLE , 1 , (pLocalHandle->lfStateFileTimeout) , lfStateFileTimeout );
if ( pLocalHandle->lfStateFileTimeout == 0.0 )
pLocalHandle->lfStateFileTimeout = lfStateFileTimeout;
STDF_CONFIG_VALUE("State_File_Delay", VAL_DOUBLE , 1 , (pLocalHandle->lfStateFileDelay) , lfStateFileDelay );
if ( pLocalHandle->lfStateFileDelay == 0.0 )
pLocalHandle->lfStateFileDelay = lfStateFileDelay;
Error:
if ( InstrumentConnectStatus )
*InstrumentConnectStatus = supported;
if ( handle )
CmtReleaseTSVPtr ( handle );
RETURN_STDERR_POINTER;
}
开发者ID:ialexyi，项目名称:ATE，代码行数:91，代码来源:Hittite_HMC_T2100_wrapper.c
示例5: IF
void *P1_0(void *__cs_param_P1_arg)
{
IF(2,0,tP1_0_1)
__CSEQ_atomic_begin();
tP1_0_1: IF(2,1,tP1_0_2)
__unbuffered_p1_EAX = x;
__CSEQ_atomic_end();
tP1_0_2: IF(2,2,tP1_0_3)
__CSEQ_atomic_begin();
tP1_0_3: IF(2,3,tP1_0_4)
y = 1;
__CSEQ_atomic_end();
tP1_0_4: IF(2,4,tP1_0_5)
__CSEQ_atomic_begin();
tP1_0_5: IF(2,5,tP1_0_6)
y = y$w_buff0_used && y$r_buff0_thd2 ? y$w_buff0 : y$w_buff1_used && y$r_buff1_thd2 ? y$w_buff1 : y;
tP1_0_6: IF(2,6,tP1_0_7)
y$w_buff0_used = y$w_buff0_used && y$r_buff0_thd2 ? (_Bool) 0 : y$w_buff0_used;
tP1_0_7: IF(2,7,tP1_0_8)
y$w_buff1_used = (y$w_buff0_used && y$r_buff0_thd2) || (y$w_buff1_used && y$r_buff1_thd2) ? (_Bool) 0 : y$w_buff1_used;
tP1_0_8: IF(2,8,tP1_0_9)
y$r_buff0_thd2 = y$w_buff0_used && y$r_buff0_thd2 ? (_Bool) 0 : y$r_buff0_thd2;
tP1_0_9: IF(2,9,tP1_0_10)
y$r_buff1_thd2 = (y$w_buff0_used && y$r_buff0_thd2) || (y$w_buff1_used && y$r_buff1_thd2) ? (_Bool) 0 : y$r_buff1_thd2;
__CSEQ_atomic_end();
tP1_0_10: IF(2,10,tP1_0_11)
__CSEQ_atomic_begin();
tP1_0_11: IF(2,11,tP1_0_12)
__unbuffered_cnt = __unbuffered_cnt + 1;
__CSEQ_atomic_end();
goto __exit_P1;
;
__exit_P1:
__CPROVER_assume(__cs_pc_cs[2] >= 12);
;
;
tP1_0_12:
STOP_NONVOID(12);
}
开发者ID:heryxpc，项目名称:prototype，代码行数:39，代码来源:_cs_safe009_rmo.oepc_false-unreach-call.c
示例6: LoadBlock
static void LoadBlock(LoadState* S, void* b, size_t size)
{
size_t r=luaZ_read(S->Z,b,size);
IF (r!=0, "unexpected end");
}
开发者ID:CSE380Skulls，项目名称:ForceOfReaction，代码行数:5，代码来源:lundump.c
示例7: SignalGenerator_GetErrorTextMessage
void* DLLEXPORT SignalGenerator_GetErrorTextMessage ( int hInstrumentHandle , int iError , char *pErrorMessage )
{
STD_ERROR StdError = {0};
tsHandle *pLocalHandle = {0};
int handle = 0;
char szReadBuffer[LOW_STRING] = {0},
szErrorDescription[LOW_STRING] = {0};
int count = 0;
char *pTemp = NULL;
IF (( hInstrumentHandle == 0 ) , "Handle is empty" );
SetBreakOnLibraryErrors (0);
handle = hInstrumentHandle;
CHK_CMT ( CmtGetTSVPtr ( handle , &pLocalHandle ));
WaitForOperationCompletion( pLocalHandle->sessionHandle , pLocalHandle->lfTimeout , pLocalHandle->lfOpcLowLevelTimeout );
viPrintf( pLocalHandle->sessionHandle , ":SYST:ERR?\n" );
viRead( pLocalHandle->sessionHandle, szReadBuffer , LOW_STRING , &count );
iError = atoi(szReadBuffer);
pTemp = strchr( szReadBuffer , '"' );
if ( pTemp )
{
pTemp++;
strcpy( szErrorDescription , pTemp );
pTemp = strchr( szErrorDescription , '"' );
if ( pTemp )
*pTemp = 0;
}
viPrintf( pLocalHandle->sessionHandle , "*CLS\n" );
if ( pErrorMessage )
{
strcpy( pErrorMessage , szErrorDescription );
}
StdError.error = iError;
if ( iError )
{
CALLOC_COPY_STRING( StdError.pszErrorDescription , szErrorDescription );
}
Error:
SetBreakOnLibraryErrors (1);
if ( handle )
CmtReleaseTSVPtr ( handle );
RETURN_STDERR_POINTER;
}
开发者ID:ialexyi，项目名称:ATE，代码行数:67，代码来源:Hittite_HMC_T2100_wrapper.c
示例8: IF
void *P0_0(void *__cs_param_P0_arg)
{
IF(1,0,tP0_0_1)
__CSEQ_atomic_begin();
tP0_0_1: IF(1,1,tP0_0_2)
__unbuffered_p0_EAX = y;
__CSEQ_atomic_end();
tP0_0_2: IF(1,2,tP0_0_3)
__CSEQ_atomic_begin();
tP0_0_3: IF(1,3,tP0_0_4)
weak$$choice0 = nondet_0();
tP0_0_4: IF(1,4,tP0_0_5)
weak$$choice2 = nondet_0();
tP0_0_5: IF(1,5,tP0_0_6)
x$flush_delayed = weak$$choice2;
tP0_0_6: IF(1,6,tP0_0_7)
x$mem_tmp = x;
tP0_0_7: IF(1,7,tP0_0_8)
x = ((!x$w_buff0_used) || ((!x$r_buff0_thd1) && (!x$w_buff1_used))) || ((!x$r_buff0_thd1) && (!x$r_buff1_thd1)) ? x : x$w_buff0_used && x$r_buff0_thd1 ? x$w_buff0 : x$w_buff1;
tP0_0_8: IF(1,8,tP0_0_9)
x$w_buff0 = weak$$choice2 ? x$w_buff0 : ((!x$w_buff0_used) || ((!x$r_buff0_thd1) && (!x$w_buff1_used))) || ((!x$r_buff0_thd1) && (!x$r_buff1_thd1)) ? x$w_buff0 : x$w_buff0_used && x$r_buff0_thd1 ? x$w_buff0 : x$w_buff0;
tP0_0_9: IF(1,9,tP0_0_10)
x$w_buff1 = weak$$choice2 ? x$w_buff1 : ((!x$w_buff0_used) || ((!x$r_buff0_thd1) && (!x$w_buff1_used))) || ((!x$r_buff0_thd1) && (!x$r_buff1_thd1)) ? x$w_buff1 : x$w_buff0_used && x$r_buff0_thd1 ? x$w_buff1 : x$w_buff1;
tP0_0_10: IF(1,10,tP0_0_11)
x$w_buff0_used = weak$$choice2 ? x$w_buff0_used : ((!x$w_buff0_used) || ((!x$r_buff0_thd1) && (!x$w_buff1_used))) || ((!x$r_buff0_thd1) && (!x$r_buff1_thd1)) ? x$w_buff0_used : x$w_buff0_used && x$r_buff0_thd1 ? (_Bool) 0 : x$w_buff0_used;
tP0_0_11: IF(1,11,tP0_0_12)
x$w_buff1_used = weak$$choice2 ? x$w_buff1_used : ((!x$w_buff0_used) || ((!x$r_buff0_thd1) && (!x$w_buff1_used))) || ((!x$r_buff0_thd1) && (!x$r_buff1_thd1)) ? x$w_buff1_used : x$w_buff0_used && x$r_buff0_thd1 ? (_Bool) 0 : (_Bool) 0;
tP0_0_12: IF(1,12,tP0_0_13)
x$r_buff0_thd1 = weak$$choice2 ? x$r_buff0_thd1 : ((!x$w_buff0_used) || ((!x$r_buff0_thd1) && (!x$w_buff1_used))) || ((!x$r_buff0_thd1) && (!x$r_buff1_thd1)) ? x$r_buff0_thd1 : x$w_buff0_used && x$r_buff0_thd1 ? (_Bool) 0 : x$r_buff0_thd1;
tP0_0_13: IF(1,13,tP0_0_14)
x$r_buff1_thd1 = weak$$choice2 ? x$r_buff1_thd1 : ((!x$w_buff0_used) || ((!x$r_buff0_thd1) && (!x$w_buff1_used))) || ((!x$r_buff0_thd1) && (!x$r_buff1_thd1)) ? x$r_buff1_thd1 : x$w_buff0_used && x$r_buff0_thd1 ? (_Bool) 0 : (_Bool) 0;
tP0_0_14: IF(1,14,tP0_0_15)
__unbuffered_p0_EBX = x;
tP0_0_15: IF(1,15,tP0_0_16)
x = x$flush_delayed ? x$mem_tmp : x;
tP0_0_16: IF(1,16,tP0_0_17)
x$flush_delayed = (_Bool) 0;
__CSEQ_atomic_end();
tP0_0_17: IF(1,17,tP0_0_18)
__CSEQ_atomic_begin();
__CSEQ_atomic_end();
tP0_0_18: IF(1,18,tP0_0_19)
__CSEQ_atomic_begin();
tP0_0_19: IF(1,19,tP0_0_20)
__unbuffered_cnt = __unbuffered_cnt + 1;
__CSEQ_atomic_end();
goto __exit_P0;
;
__exit_P0:
__CPROVER_assume(__cs_pc_cs[1] >= 20);
;
;
tP0_0_20:
STOP_NONVOID(20);
}
开发者ID:heryxpc，项目名称:prototype，代码行数:55，代码来源:_cs_safe014_rmo.opt_false-unreach-call.c
示例9: main_thread
int main_thread(void)
{
;
IF(0,0,tmain_1)
__cs_create(0, 0, P0_0, 0, 1);
tmain_1: IF(0,1,tmain_2)
__cs_create(0, 0, P1_0, 0, 2);
tmain_2: IF(0,2,tmain_3)
__cs_create(0, 0, P2_0, 0, 3);
tmain_3: IF(0,3,tmain_4)
__CSEQ_atomic_begin();
tmain_4: IF(0,4,tmain_5)
main$tmp_guard0 = __unbuffered_cnt == 3;
__CSEQ_atomic_end();
tmain_5: IF(0,5,tmain_6)
__CPROVER_assume(main$tmp_guard0);
tmain_6: IF(0,6,tmain_7)
__CSEQ_atomic_begin();
tmain_7: IF(0,7,tmain_8)
x = x$w_buff0_used && x$r_buff0_thd0 ? x$w_buff0 : x$w_buff1_used && x$r_buff1_thd0 ? x$w_buff1 : x;
tmain_8: IF(0,8,tmain_9)
x$w_buff0_used = x$w_buff0_used && x$r_buff0_thd0 ? (_Bool) 0 : x$w_buff0_used;
tmain_9: IF(0,9,tmain_10)
x$w_buff1_used = (x$w_buff0_used && x$r_buff0_thd0) || (x$w_buff1_used && x$r_buff1_thd0) ? (_Bool) 0 : x$w_buff1_used;
tmain_10: IF(0,10,tmain_11)
x$r_buff0_thd0 = x$w_buff0_used && x$r_buff0_thd0 ? (_Bool) 0 : x$r_buff0_thd0;
tmain_11: IF(0,11,tmain_12)
x$r_buff1_thd0 = (x$w_buff0_used && x$r_buff0_thd0) || (x$w_buff1_used && x$r_buff1_thd0) ? (_Bool) 0 : x$r_buff1_thd0;
__CSEQ_atomic_end();
tmain_12: IF(0,12,tmain_13)
__CSEQ_atomic_begin();
tmain_13: IF(0,13,tmain_14)
weak$$choice0 = nondet_0();
tmain_14: IF(0,14,tmain_15)
weak$$choice2 = nondet_0();
tmain_15: IF(0,15,tmain_16)
x$flush_delayed = weak$$choice2;
tmain_16: IF(0,16,tmain_17)
x$mem_tmp = x;
tmain_17: IF(0,17,tmain_18)
x = ((!x$w_buff0_used) || ((!x$r_buff0_thd0) && (!x$w_buff1_used))) || ((!x$r_buff0_thd0) && (!x$r_buff1_thd0)) ? x : x$w_buff0_used && x$r_buff0_thd0 ? x$w_buff0 : x$w_buff1;
tmain_18: IF(0,18,tmain_19)
x$w_buff0 = weak$$choice2 ? x$w_buff0 : ((!x$w_buff0_used) || ((!x$r_buff0_thd0) && (!x$w_buff1_used))) || ((!x$r_buff0_thd0) && (!x$r_buff1_thd0)) ? x$w_buff0 : x$w_buff0_used && x$r_buff0_thd0 ? x$w_buff0 : x$w_buff0;
tmain_19: IF(0,19,tmain_20)
x$w_buff1 = weak$$choice2 ? x$w_buff1 : ((!x$w_buff0_used) || ((!x$r_buff0_thd0) && (!x$w_buff1_used))) || ((!x$r_buff0_thd0) && (!x$r_buff1_thd0)) ? x$w_buff1 : x$w_buff0_used && x$r_buff0_thd0 ? x$w_buff1 : x$w_buff1;
tmain_20: IF(0,20,tmain_21)
x$w_buff0_used = weak$$choice2 ? x$w_buff0_used : ((!x$w_buff0_used) || ((!x$r_buff0_thd0) && (!x$w_buff1_used))) || ((!x$r_buff0_thd0) && (!x$r_buff1_thd0)) ? x$w_buff0_used : x$w_buff0_used && x$r_buff0_thd0 ? (_Bool) 0 : x$w_buff0_used;
tmain_21: IF(0,21,tmain_22)
x$w_buff1_used = weak$$choice2 ? x$w_buff1_used : ((!x$w_buff0_used) || ((!x$r_buff0_thd0) && (!x$w_buff1_used))) || ((!x$r_buff0_thd0) && (!x$r_buff1_thd0)) ? x$w_buff1_used : x$w_buff0_used && x$r_buff0_thd0 ? (_Bool) 0 : (_Bool) 0;
tmain_22: IF(0,22,tmain_23)
x$r_buff0_thd0 = weak$$choice2 ? x$r_buff0_thd0 : ((!x$w_buff0_used) || ((!x$r_buff0_thd0) && (!x$w_buff1_used))) || ((!x$r_buff0_thd0) && (!x$r_buff1_thd0)) ? x$r_buff0_thd0 : x$w_buff0_used && x$r_buff0_thd0 ? (_Bool) 0 : x$r_buff0_thd0;
tmain_23: IF(0,23,tmain_24)
x$r_buff1_thd0 = weak$$choice2 ? x$r_buff1_thd0 : ((!x$w_buff0_used) || ((!x$r_buff0_thd0) && (!x$w_buff1_used))) || ((!x$r_buff0_thd0) && (!x$r_buff1_thd0)) ? x$r_buff1_thd0 : x$w_buff0_used && x$r_buff0_thd0 ? (_Bool) 0 : (_Bool) 0;
tmain_24: IF(0,24,tmain_25)
main$tmp_guard1 = !((((x == 2) && (y == 2)) && (__unbuffered_p0_EAX == 0)) && (__unbuffered_p1_EAX == 1));
tmain_25: IF(0,25,tmain_26)
x = x$flush_delayed ? x$mem_tmp : x;
tmain_26: IF(0,26,tmain_27)
x$flush_delayed = (_Bool) 0;
__CSEQ_atomic_end();
tmain_27: IF(0,27,tmain_28)
assert(main$tmp_guard1);
goto __exit_main;
;
__exit_main:
__CPROVER_assume(__cs_pc_cs[0] >= 28);
;
;
tmain_28:
STOP_NONVOID(28);
}
开发者ID:heryxpc，项目名称:prototype，代码行数:71，代码来源:_cs_safe032_rmo.opt_false-unreach-call.c
示例10: get_desc
void get_desc(dungeon* d) {
room r = *(d->cur_room);
printf(
"\t%s" //journey conclusion
"%s" //low health
"%s" //visited
"%s" //boss room
"%s" //chest room
"%s" //dark
"%s" //cold
"%s" //sky view
"%s" //trait
"%s" //exit north
"%s" //exit south
"%s" //exit east
"%s\n", //exit west
IF(d->location==d->end_room, " I believe my journey shall soon end."),
IF(d->player.hp<3, " I feel the wounds of battle taking their toll."),
IF(r.visited, " This room seems familiar to me."),
IF(r.boss_room, " This is a boss room."),
IF(r.chest, " I see a chest... I wonder what's inside."),
IF(r.dark, " This room is very dark."),
IF(r.cold, " This room is very cold."),
IF(r.sky_view, " I can see the stars, they remind me to be strong."),
IF(d->player.trait==r.trait, " You feel at home in this room."),
IF(r.n, " I see a passage to the north."),
IF(r.s, " I see a passage to the south."),
IF(r.e, " I see a passage to the east."),
IF(r.w, " I see a passage to the west.")
);
}
开发者ID:SomeCrazyGuy，项目名称:roguelike，代码行数:32，代码来源:pro.c
示例11: IF
void *P2_0(void *__cs_param_P2_arg)
{
IF(3,0,tP2_0_1)
__CSEQ_atomic_begin();
tP2_0_1: IF(3,1,tP2_0_2)
x$w_buff1 = x$w_buff0;
tP2_0_2: IF(3,2,tP2_0_3)
x$w_buff0 = 2;
tP2_0_3: IF(3,3,tP2_0_4)
x$w_buff1_used = x$w_buff0_used;
tP2_0_4: IF(3,4,tP2_0_5)
x$w_buff0_used = (_Bool) 1;
tP2_0_5: IF(3,5,tP2_0_6)
assert(!(x$w_buff1_used && x$w_buff0_used));
tP2_0_6: IF(3,6,tP2_0_7)
x$r_buff1_thd0 = x$r_buff0_thd0;
tP2_0_7: IF(3,7,tP2_0_8)
x$r_buff1_thd1 = x$r_buff0_thd1;
tP2_0_8: IF(3,8,tP2_0_9)
x$r_buff1_thd2 = x$r_buff0_thd2;
tP2_0_9: IF(3,9,tP2_0_10)
x$r_buff1_thd3 = x$r_buff0_thd3;
tP2_0_10: IF(3,10,tP2_0_11)
x$r_buff0_thd3 = (_Bool) 1;
__CSEQ_atomic_end();
tP2_0_11: IF(3,11,tP2_0_12)
__CSEQ_atomic_begin();
tP2_0_12: IF(3,12,tP2_0_13)
y = 1;
__CSEQ_atomic_end();
tP2_0_13: IF(3,13,tP2_0_14)
__CSEQ_atomic_begin();
tP2_0_14: IF(3,14,tP2_0_15)
x = x$w_buff0_used && x$r_buff0_thd3 ? x$w_buff0 : x$w_buff1_used && x$r_buff1_thd3 ? x$w_buff1 : x;
tP2_0_15: IF(3,15,tP2_0_16)
x$w_buff0_used = x$w_buff0_used && x$r_buff0_thd3 ? (_Bool) 0 : x$w_buff0_used;
tP2_0_16: IF(3,16,tP2_0_17)
x$w_buff1_used = (x$w_buff0_used && x$r_buff0_thd3) || (x$w_buff1_used && x$r_buff1_thd3) ? (_Bool) 0 : x$w_buff1_used;
tP2_0_17: IF(3,17,tP2_0_18)
x$r_buff0_thd3 = x$w_buff0_used && x$r_buff0_thd3 ? (_Bool) 0 : x$r_buff0_thd3;
tP2_0_18: IF(3,18,tP2_0_19)
x$r_buff1_thd3 = (x$w_buff0_used && x$r_buff0_thd3) || (x$w_buff1_used && x$r_buff1_thd3) ? (_Bool) 0 : x$r_buff1_thd3;
__CSEQ_atomic_end();
tP2_0_19: IF(3,19,tP2_0_20)
__CSEQ_atomic_begin();
tP2_0_20: IF(3,20,tP2_0_21)
__unbuffered_cnt = __unbuffered_cnt + 1;
__CSEQ_atomic_end();
goto __exit_P2;
;
__exit_P2:
__CPROVER_assume(__cs_pc_cs[3] >= 21);
;
;
tP2_0_21:
STOP_NONVOID(21);
}
开发者ID:heryxpc，项目名称:prototype，代码行数:57，代码来源:_cs_safe032_rmo.opt_false-unreach-call.c
示例12: IF
void *P3_0(void *__cs_param_P3_arg)
{
IF(4,0,tP3_0_1)
__CSEQ_atomic_begin();
tP3_0_1: IF(4,1,tP3_0_2)
z$w_buff1 = z$w_buff0;
tP3_0_2: IF(4,2,tP3_0_3)
z$w_buff0 = 1;
tP3_0_3: IF(4,3,tP3_0_4)
z$w_buff1_used = z$w_buff0_used;
tP3_0_4: IF(4,4,tP3_0_5)
z$w_buff0_used = (_Bool) 1;
tP3_0_5: IF(4,5,tP3_0_6)
assert(!(z$w_buff1_used && z$w_buff0_used));
tP3_0_6: IF(4,6,tP3_0_7)
z$r_buff1_thd0 = z$r_buff0_thd0;
tP3_0_7: IF(4,7,tP3_0_8)
z$r_buff1_thd1 = z$r_buff0_thd1;
tP3_0_8: IF(4,8,tP3_0_9)
z$r_buff1_thd2 = z$r_buff0_thd2;
tP3_0_9: IF(4,9,tP3_0_10)
z$r_buff1_thd3 = z$r_buff0_thd3;
tP3_0_10: IF(4,10,tP3_0_11)
z$r_buff1_thd4 = z$r_buff0_thd4;
tP3_0_11: IF(4,11,tP3_0_12)
z$r_buff0_thd4 = (_Bool) 1;
__CSEQ_atomic_end();
tP3_0_12: IF(4,12,tP3_0_13)
__CSEQ_atomic_begin();
tP3_0_13: IF(4,13,tP3_0_14)
__unbuffered_p3_EAX = a;
__CSEQ_atomic_end();
tP3_0_14: IF(4,14,tP3_0_15)
__CSEQ_atomic_begin();
tP3_0_15: IF(4,15,tP3_0_16)
z = z$w_buff0_used && z$r_buff0_thd4 ? z$w_buff0 : z$w_buff1_used && z$r_buff1_thd4 ? z$w_buff1 : z;
tP3_0_16: IF(4,16,tP3_0_17)
z$w_buff0_used = z$w_buff0_used && z$r_buff0_thd4 ? (_Bool) 0 : z$w_buff0_used;
tP3_0_17: IF(4,17,tP3_0_18)
z$w_buff1_used = (z$w_buff0_used && z$r_buff0_thd4) || (z$w_buff1_used && z$r_buff1_thd4) ? (_Bool) 0 : z$w_buff1_used;
tP3_0_18: IF(4,18,tP3_0_19)
z$r_buff0_thd4 = z$w_buff0_used && z$r_buff0_thd4 ? (_Bool) 0 : z$r_buff0_thd4;
tP3_0_19: IF(4,19,tP3_0_20)
z$r_buff1_thd4 = (z$w_buff0_used && z$r_buff0_thd4) || (z$w_buff1_used && z$r_buff1_thd4) ? (_Bool) 0 : z$r_buff1_thd4;
__CSEQ_atomic_end();
tP3_0_20: IF(4,20,tP3_0_21)
__CSEQ_atomic_begin();
tP3_0_21: IF(4,21,tP3_0_22)
__unbuffered_cnt = __unbuffered_cnt + 1;
__CSEQ_atomic_end();
goto __exit_P3;
;
__exit_P3:
__CPROVER_assume(__cs_pc_cs[4] >= 22);
;
;
tP3_0_22:
STOP_NONVOID(22);
}
开发者ID:heryxpc，项目名称:prototype，代码行数:59，代码来源:_cs_mix051_rmo.opt_false-unreach-call.c
示例13: IF
void *P2_0(void *__cs_param_P2_arg)
{
IF(3,0,tP2_0_1)
__CSEQ_atomic_begin();
tP2_0_1: IF(3,1,tP2_0_2)
y = 2;
__CSEQ_atomic_end();
tP2_0_2: IF(3,2,tP2_0_3)
__CSEQ_atomic_begin();
tP2_0_3: IF(3,3,tP2_0_4)
__unbuffered_p2_EAX = y;
__CSEQ_atomic_end();
tP2_0_4: IF(3,4,tP2_0_5)
__CSEQ_atomic_begin();
tP2_0_5: IF(3,5,tP2_0_6)
weak$$choice0 = nondet_1();
tP2_0_6: IF(3,6,tP2_0_7)
weak$$choice2 = nondet_1();
tP2_0_7: IF(3,7,tP2_0_8)
z$flush_delayed = weak$$choice2;
tP2_0_8: IF(3,8,tP2_0_9)
z$mem_tmp = z;
tP2_0_9: IF(3,9,tP2_0_10)
z = ((!z$w_buff0_used) || ((!z$r_buff0_thd3) && (!z$w_buff1_used))) || ((!z$r_buff0_thd3) && (!z$r_buff1_thd3)) ? z : z$w_buff0_used && z$r_buff0_thd3 ? z$w_buff0 : z$w_buff1;
tP2_0_10: IF(3,10,tP2_0_11)
z$w_buff0 = weak$$choice2 ? z$w_buff0 : ((!z$w_buff0_used) || ((!z$r_buff0_thd3) && (!z$w_buff1_used))) || ((!z$r_buff0_thd3) && (!z$r_buff1_thd3)) ? z$w_buff0 : z$w_buff0_used && z$r_buff0_thd3 ? z$w_buff0 : z$w_buff0;
tP2_0_11: IF(3,11,tP2_0_12)
z$w_buff1 = weak$$choice2 ? z$w_buff1 : ((!z$w_buff0_used) || ((!z$r_buff0_thd3) && (!z$w_buff1_used))) || ((!z$r_buff0_thd3) && (!z$r_buff1_thd3)) ? z$w_buff1 : z$w_buff0_used && z$r_buff0_thd3 ? z$w_buff1 : z$w_buff1;
tP2_0_12: IF(3,12,tP2_0_13)
z$w_buff0_used = weak$$choice2 ? z$w_buff0_used : ((!z$w_buff0_used) || ((!z$r_buff0_thd3) && (!z$w_buff1_used))) || ((!z$r_buff0_thd3) && (!z$r_buff1_thd3)) ? z$w_buff0_used : z$w_buff0_used && z$r_buff0_thd3 ? (_Bool) 0 : z$w_buff0_used;
tP2_0_13: IF(3,13,tP2_0_14)
z$w_buff1_used = weak$$choice2 ? z$w_buff1_used : ((!z$w_buff0_used) || ((!z$r_buff0_thd3) && (!z$w_buff1_used))) || ((!z$r_buff0_thd3) && (!z$r_buff1_thd3)) ? z$w_buff1_used : z$w_buff0_used && z$r_buff0_thd3 ? (_Bool) 0 : (_Bool) 0;
tP2_0_14: IF(3,14,tP2_0_15)
z$r_buff0_thd3 = weak$$choice2 ? z$r_buff0_thd3 : ((!z$w_buff0_used) || ((!z$r_buff0_thd3) && (!z$w_buff1_used))) || ((!z$r_buff0_thd3) && (!z$r_buff1_thd3)) ? z$r_buff0_thd3 : z$w_buff0_used && z$r_buff0_thd3 ? (_Bool) 0 : z$r_buff0_thd3;
tP2_0_15: IF(3,15,tP2_0_16)
z$r_buff1_thd3 = weak$$choice2 ? z$r_buff1_thd3 : ((!z$w_buff0_used) || ((!z$r_buff0_thd3) && (!z$w_buff1_used))) || ((!z$r_buff0_thd3) && (!z$r_buff1_thd3)) ? z$r_buff1_thd3 : z$w_buff0_used && z$r_buff0_thd3 ? (_Bool) 0 : (_Bool) 0;
tP2_0_16: IF(3,16,tP2_0_17)
__unbuffered_p2_EBX = z;
tP2_0_17: IF(3,17,tP2_0_18)
z = z$flush_delayed ? z$mem_tmp : z;
tP2_0_18: IF(3,18,tP2_0_19)
z$flush_delayed = (_Bool) 0;
__CSEQ_atomic_end();
tP2_0_19: IF(3,19,tP2_0_20)
__CSEQ_atomic_begin();
tP2_0_20: IF(3,20,tP2_0_21)
z = z$w_buff0_used && z$r_buff0_thd3 ? z$w_buff0 : z$w_buff1_used && z$r_buff1_thd3 ? z$w_buff1 : z;
tP2_0_21: IF(3,21,tP2_0_22)
z$w_buff0_used = z$w_buff0_used && z$r_buff0_thd3 ? (_Bool) 0 : z$w_buff0_used;
tP2_0_22: IF(3,22,tP2_0_23)
z$w_buff1_used = (z$w_buff0_used && z$r_buff0_thd3) || (z$w_buff1_used && z$r_buff1_thd3) ? (_Bool) 0 : z$w_buff1_used;
tP2_0_23: IF(3,23,tP2_0_24)
z$r_buff0_thd3 = z$w_buff0_used && z$r_buff0_thd3 ? (_Bool) 0 : z$r_buff0_thd3;
tP2_0_24: IF(3,24,tP2_0_25)
z$r_buff1_thd3 = (z$w_buff0_used && z$r_buff0_thd3) || (z$w_buff1_used && z$r_buff1_thd3) ? (_Bool) 0 : z$r_buff1_thd3;
__CSEQ_atomic_end();
tP2_0_25: IF(3,25,tP2_0_26)
__CSEQ_atomic_begin();
tP2_0_26: IF(3,26,tP2_0_27)
__unbuffered_cnt = __unbuffered_cnt + 1;
__CSEQ_atomic_end();
goto __exit_P2;
;
__exit_P2:
__CPROVER_assume(__cs_pc_cs[3] >= 27);
;
;
tP2_0_27:
STOP_NONVOID(27);
}
开发者ID:heryxpc，项目名称:prototype，代码行数:70，代码来源:_cs_mix025_power.opt_false-unreach-call.c
示例14: IF
void *P1_0(void *__cs_param_P1_arg)
{
IF(2,0,tP1_0_1)
__CSEQ_atomic_begin();
tP1_0_1: IF(2,1,tP1_0_2)
x = 2;
__CSEQ_atomic_end();
tP1_0_2: IF(2,2,tP1_0_3)
__CSEQ_atomic_begin();
tP1_0_3: IF(2,3,tP1_0_4)
y = 1;
__CSEQ_atomic_end();
tP1_0_4: IF(2,4,tP1_0_5)
__CSEQ_atomic_begin();
tP1_0_5: IF(2,5,tP1_0_6)
__unbuffered_p1_EAX = y;
__CSEQ_atomic_end();
tP1_0_6: IF(2,6,tP1_0_7)
__CSEQ_atomic_begin();
tP1_0_7: IF(2,7,tP1_0_8)
weak$$choice0 = nondet_1();
tP1_0_8: IF(2,8,tP1_0_9)
weak$$choice2 = nondet_1();
tP1_0_9: IF(2,9,tP1_0_10)
z$flush_delayed = weak$$choice2;
tP1_0_10: IF(2,10,tP1_0_11)
z$mem_tmp = z;
tP1_0_11: IF(2,11,tP1_0_12)
z = ((!z$w_buff0_used) || ((!z$r_buff0_thd2) && (!z$w_buff1_used))) || ((!z$r_buff0_thd2) && (!z$r_buff1_thd2)) ? z : z$w_buff0_used && z$r_buff0_thd2 ? z$w_buff0 : z$w_buff1;
tP1_0_12: IF(2,12,tP1_0_13)
z$w_buff0 = weak$$choice2 ? z$w_buff0 : ((!z$w_buff0_used) || ((!z$r_buff0_thd2) && (!z$w_buff1_used))) || ((!z$r_buff0_thd2) && (!z$r_buff1_thd2)) ? z$w_buff0 : z$w_buff0_used && z$r_buff0_thd2 ? z$w_buff0 : z$w_buff0;
tP1_0_13: IF(2,13,tP1_0_14)
z$w_buff1 = weak$$choice2 ? z$w_buff1 : ((!z$w_buff0_used) || ((!z$r_buff0_thd2) && (!z$w_buff1_used))) || ((!z$r_buff0_thd2) && (!z$r_buff1_thd2)) ? z$w_buff1 : z$w_buff0_used && z$r_buff0_thd2 ? z$w_buff1 : z$w_buff1;
tP1_0_14: IF(2,14,tP1_0_15)
z$w_buff0_used = weak$$choice2 ? z$w_buff0_used : ((!z$w_buff0_used) || ((!z$r_buff0_thd2) && (!z$w_buff1_used))) || ((!z$r_buff0_thd2) && (!z$r_buff1_thd2)) ? z$w_buff0_used : z$w_buff0_used && z$r_buff0_thd2 ? (_Bool) 0 : z$w_buff0_used;
tP1_0_15: IF(2,15,tP1_0_16)
z$w_buff1_used = weak$$choice2 ? z$w_buff1_used : ((!z$w_buff0_used) || ((!z$r_buff0_thd2) && (!z$w_buff1_used))) || ((!z$r_buff0_thd2) && (!z$r_buff1_thd2)) ? z$w_buff1_used : z$w_buff0_used && z$r_buff0_thd2 ? (_Bool) 0 : (_Bool) 0;
tP1_0_16: IF(2,16,tP1_0_17)
z$r_buff0_thd2 = weak$$choice2 ? z$r_buff0_thd2 : ((!z$w_buff0_used) || ((!z$r_buff0_thd2) && (!z$w_buff1_used))) || ((!z$r_buff0_thd2) && (!z$r_buff1_thd2)) ? z$r_buff0_thd2 : z$w_buff0_used && z$r_buff0_thd2 ? (_Bool) 0 : z$r_buff0_thd2;
tP1_0_17: IF(2,17,tP1_0_18)
z$r_buff1_thd2 = weak$$choice2 ? z$r_buff1_thd2 : ((!z$w_buff0_used) || ((!z$r_buff0_thd2) && (!z$w_buff1_used))) || ((!z$r_buff0_thd2) && (!z$r_buff1_thd2)) ? z$r_buff1_thd2 : z$w_buff0_used && z$r_buff0_thd2 ? (_Bool) 0 : (_Bool) 0;
tP1_0_18: IF(2,18,tP1_0_19)
__unbuffered_p1_EBX = z;
tP1_0_19: IF(2,19,tP1_0_20)
z = z$flush_delayed ? z$mem_tmp : z;
tP1_0_20: IF(2,20,tP1_0_21)
|
客服电话
APP下载
官方微信
请发表评论