本文整理汇总了C++中IGNORE函数的典型用法代码示例。如果您正苦于以下问题：C++ IGNORE函数的具体用法？C++ IGNORE怎么用？C++ IGNORE使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了IGNORE函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: IGNORE
/*ARGSUSED*/ void REGALWRATH_GLU_CALL glu_wrath_gl_noBeginData( WRATH_GLUenum type, int winding_number,
void *polygonData )
{
IGNORE(polygonData);
IGNORE(type);
IGNORE(winding_number);
}
开发者ID:nomovok-opensource，项目名称:wrath，代码行数:7，代码来源:tess.cpp
示例2: delete_qso
void delete_qso(void) {
int x;
struct stat statbuf;
int lfile;
char logline[100];
char call[15], bandmode[6];
mvprintw(13, 29, "OK to delete last qso (y/n)?");
x = key_get();
if ((x == 'y') || (x == 'Y')) {
if ((lfile = open(logfile, O_RDWR)) < 0) {
TLF_LOG_WARN("I can not find the logfile...");
} else {
fstat(lfile, &statbuf);
if (statbuf.st_size >= LOGLINELEN) {
if (qtcdirection > 0) {
// read band, mode and call from last QSO line
lseek(lfile, ((int)statbuf.st_size - LOGLINELEN), SEEK_SET);
IGNORE(read(lfile, logline, LOGLINELEN - 1));;
g_strlcpy(bandmode, logline, 6);
g_strlcpy(call, logline + 29, 15);
g_strchomp(call);
// delete QTC's for that combination of band, mode and call
delete_last_qtcs(call, bandmode);
}
IGNORE(ftruncate(lfile, statbuf.st_size - LOGLINELEN));
}
fsync(lfile);
close(lfile);
if (qsos[nr_qsos][0] != ';') {
band_score[bandinx]--;
qsonum--;
qsonr_to_str();
}
nr_qsos--;
qsos[nr_qsos][0] = '\0';
}
scroll_log();
}
attron(COLOR_PAIR(C_LOG) | A_STANDOUT);
mvprintw(13, 29, " ");
printcall();
clear_display();
}
开发者ID:Tlf，项目名称:tlf，代码行数:60，代码来源:deleteqso.c
示例3: ctrl_semihosting_getthumbswi
static int
ctrl_semihosting_getthumbswi(p_Buffer * buffer, void *stateptr)
{
#ifdef ICEMAN2
/* Reads the value of the semi-hosting vector. */
int debugID, OSinfo1, OSinfo2, subreason;
word semihosting_thumbswi, status;
IGNORE(stateptr);
unpack_message(BUFFERDATA(*buffer) + 4, "%w%w%w%w", &debugID, &OSinfo1,
&OSinfo2, &subreason);
status = angelOS_SemiHosting_GetThumbSWI(OSinfo1, OSinfo2,
&semihosting_thumbswi);
LogInfo(LOG_CTRL, ("ctrl_semihosting_getthumbswi -> %08x\n",
semihosting_thumbswi));
return msgsend(CI_HADP, "%w%w%w%w%w%w%w",
(ADP_Control | TtoH), debugID, OSinfo1, OSinfo2,
ADP_Ctrl_SemiHosting_GetThumbSWI,
status, semihosting_thumbswi);
#else
IGNORE(buffer);
IGNORE(stateptr);
LogInfo(LOG_CTRL, ( "ctrl_semihosting_getthumbswi - unsupported\n"));
return -1;
#endif
}
开发者ID:lawliet89，项目名称:pascal2arm，代码行数:32，代码来源:ctrl.c
示例4: ctrl_settopmem
static int
ctrl_settopmem(p_Buffer * buffer, void *stateptr)
{
#ifdef ICEMAN2
/* Set the top of memory we report on a HEAPINFO SWI */
int debugID, OSinfo1, OSinfo2, subreason;
word topmem;
IGNORE(stateptr);
unpack_message(BUFFERDATA(*buffer) + 4, "%w%w%w%w%w", &debugID, &OSinfo1,
&OSinfo2, &subreason, &topmem);
LogInfo(LOG_CTRL, ( "ctrl_settopmem(topmem = 0x%x)\n", topmem));
angel_SetTopMem((unsigned)topmem);
return msgsend(CI_HADP, "%w%w%w%w%w%w",
(ADP_Control | TtoH), debugID, OSinfo1, OSinfo2,
ADP_Ctrl_SetTopMem, RDIError_NoError);
#else
IGNORE(buffer);
IGNORE(stateptr);
return -1;
#endif
}
开发者ID:lawliet89，项目名称:pascal2arm，代码行数:27，代码来源:ctrl.c
示例5: IGNORE
/*ARGSUSED*/ void REGALFASTUIDRAW_GLU_CALL glu_fastuidraw_gl_noBeginData( FASTUIDRAW_GLUenum type, int winding_number,
void *polygonData )
{
IGNORE(polygonData);
IGNORE(type);
IGNORE(winding_number);
}
开发者ID:cjcappel，项目名称:fastuidraw，代码行数:7，代码来源:tess.cpp
示例6: test_bad_write
/* Callbacks for the write function. */
static enum status test_bad_write(void * param, const void * src, size_t len) {
IGNORE(param);
IGNORE(src);
IGNORE(len);
return status_err;
}
开发者ID:sw17ch，项目名称:inversion_demo，代码行数:8，代码来源:test.c
示例7: ctrl_semihosting_setarmswi
static int
ctrl_semihosting_setarmswi(p_Buffer * buffer, void *stateptr)
{
#ifdef ICEMAN2
/* Set the semi-hosting ARM SWI. */
int debugID, OSinfo1, OSinfo2, subreason;
word semihosting_armswi, status;
IGNORE(stateptr);
unpack_message(BUFFERDATA(*buffer) + 4, "%w%w%w%w%w", &debugID, &OSinfo1,
&OSinfo2, &subreason, &semihosting_armswi);
LogInfo(LOG_CTRL, ( "ctrl_semihosting_setarmswi(swi 0x%x)\n", semihosting_armswi));
status = angelOS_SemiHosting_SetARMSWI(OSinfo1, OSinfo2,
semihosting_armswi);
return msgsend(CI_HADP, "%w%w%w%w%w%w",
(ADP_Control | TtoH), debugID, OSinfo1, OSinfo2,
ADP_Ctrl_SemiHosting_SetARMSWI, status);
#else
IGNORE(buffer);
IGNORE(stateptr);
LogInfo(LOG_CTRL, ( "ctrl_semihosting_setarmswi -> unsupported\n"));
return -1;
#endif
}
开发者ID:lawliet89，项目名称:pascal2arm，代码行数:30，代码来源:ctrl.c
示例8: fbdev_lcd_crtc_mode_set
static void fbdev_lcd_crtc_mode_set(xf86CrtcPtr crtc, DisplayModePtr mode, DisplayModePtr adjusted_mode, int x, int y)
{
IGNORE( crtc );
IGNORE( mode );
IGNORE( adjusted_mode );
IGNORE( x );
IGNORE( y );
}
开发者ID:igloocommunity，项目名称:xorg-x11-drv-ste，代码行数:8，代码来源:mali_lcd.c
示例9: fbdev_lcd_crtc_mode_fixup
static Bool fbdev_lcd_crtc_mode_fixup(xf86CrtcPtr crtc, DisplayModePtr mode, DisplayModePtr adjusted_mode)
{
IGNORE( crtc );
IGNORE( mode );
IGNORE( adjusted_mode );
return TRUE;
}
开发者ID:igloocommunity，项目名称:xorg-x11-drv-ste，代码行数:8，代码来源:mali_lcd.c
示例10: maliSolid
static void maliSolid(PixmapPtr pPixmap, int x1, int y1, int x2, int y2)
{
IGNORE(pPixmap);
IGNORE(x1);
IGNORE(y1);
IGNORE(x2);
IGNORE(y2);
}
开发者ID:OtherCrashOverride，项目名称:c2_mali_ddx，代码行数:8，代码来源:mali_exa.c
示例11: fbdev_lcd_output_mode_fixup
static Bool fbdev_lcd_output_mode_fixup(xf86OutputPtr output, DisplayModePtr mode, DisplayModePtr adjusted_mode)
{
IGNORE( output );
IGNORE( mode );
IGNORE( adjusted_mode );
return TRUE;
}
开发者ID:igloocommunity，项目名称:xorg-x11-drv-ste，代码行数:8，代码来源:mali_lcd.c
示例12: fbdev_lcd_crtc_gamma_set
static void fbdev_lcd_crtc_gamma_set(xf86CrtcPtr crtc, CARD16 *red, CARD16 *green, CARD16 *blue, int size)
{
IGNORE( crtc );
IGNORE( red );
IGNORE( green );
IGNORE( blue );
IGNORE( size );
}
开发者ID:igloocommunity，项目名称:xorg-x11-drv-ste，代码行数:8，代码来源:mali_lcd.c
示例13: angel_NodevIntHandler
/*
* Function: angel_NodevIntHandler
* Purpose: Place-holding interrupt function that reports an error
*
* Params: As described in devdriv.h
*
* Returns: This routine does not return
*/
void
angel_NodevIntHandler(unsigned int ident, unsigned int data,
unsigned int empty_stack)
{
IGNORE(data);
IGNORE(empty_stack);
LogError(LOG_DEVMISC, ( "NodevIntHandler called: ident %d\n", ident));
}
开发者ID:lawliet89，项目名称:pascal2arm，代码行数:17，代码来源:devmisc.c
示例14: maliPrepareSolid
static Bool maliPrepareSolid(PixmapPtr pPixmap, int alu, Pixel planemask, Pixel fg)
{
IGNORE(pPixmap);
IGNORE(alu);
IGNORE(planemask);
IGNORE(fg);
return FALSE;
}
开发者ID:OtherCrashOverride，项目名称:c2_mali_ddx，代码行数:9，代码来源:mali_exa.c
示例15: maliCheckComposite
static Bool maliCheckComposite(int op, PicturePtr pSrcPicture, PicturePtr pMaskPicture, PicturePtr pDstPicture)
{
IGNORE(op);
IGNORE(pSrcPicture);
IGNORE(pMaskPicture);
IGNORE(pDstPicture);
return FALSE;
}
开发者ID:OtherCrashOverride，项目名称:c2_mali_ddx，代码行数:9，代码来源:mali_exa.c
示例16: prmat
void prmat(void)
{
int i, j;
struct elm *el;
IGNORE(printf("\n\n "));
for (i=10 ; i <= neqn ; i += 10)
IGNORE(printf(" %1d", (i%100)/10));
IGNORE(printf("\n "));
for (i=1 ; i <= neqn; i++)
IGNORE(printf("%1d", i%10));
IGNORE(printf("\n\n"));
for (i=1 ; i <= neqn ; i++)
{
IGNORE(printf("%3d ", i));
j = 0;
for (el = rowst[i] ;el != ELM0 ; el = el->c_right)
{
for ( j++ ; j < el->col ; j++)
IGNORE(putchar(' '));
IGNORE(putchar('*'));
}
IGNORE(putchar('\n'));
}
}
开发者ID:nrnhines，项目名称:nrn，代码行数:25，代码来源:prmat.c
示例17: maliComposite
static void maliComposite(PixmapPtr pDstPixmap, int srcX, int srcY, int maskX, int maskY, int dstX, int dstY, int width, int height)
{
IGNORE(pDstPixmap);
IGNORE(srcX);
IGNORE(srcY);
IGNORE(maskX);
IGNORE(maskY);
IGNORE(dstX);
IGNORE(dstY);
IGNORE(width);
IGNORE(height);
}
开发者ID:OtherCrashOverride，项目名称:c2_mali_ddx，代码行数:12，代码来源:mali_exa.c
示例18: Angel_ApplReceiveMode
void
Angel_ApplReceiveMode(DevRecvMode mode)
{
/* does nothing in non-minimal system */
IGNORE(mode);
return;
}
开发者ID:lawliet89，项目名称:pascal2arm，代码行数:7，代码来源:devappl.c
示例19: ctrl_start_agent
static int
ctrl_start_agent(p_Buffer * buffer, void *stateptr)
{
/* Decode an loadagent message */
int debugID, OSinfo1, OSinfo2, subreason, err;
word startaddress;
word status;
IGNORE(stateptr);
unpack_message(BUFFERDATA(*buffer) + 4, "%w%w%w%w%w", &debugID, &OSinfo1,
&OSinfo2, &subreason, &startaddress);
LogInfo(LOG_CTRL, ( "ctrl_start_agent(startaddress = %x)\n", startaddress));
if (loadagent_sofar == loadagent_size
&& startaddress >= loadagent_address
&& startaddress < (loadagent_address + loadagent_size))
status = RDIError_NoError;
else
status = RDIError_BadConfigData;
err = msgsend(CI_HADP, "%w%w%w%w%w%w",
(ADP_Control | TtoH), debugID, OSinfo1, OSinfo2,
ADP_Ctrl_Start_Agent, status);
if (err == RDIError_NoError && status == RDIError_NoError)
angelOS_ExecuteNewAgent(startaddress);
return err;
}
开发者ID:lawliet89，项目名称:pascal2arm，代码行数:30，代码来源:ctrl.c
示例20: ctrl_download_agent
static int
ctrl_download_agent(p_Buffer * buffer, void *stateptr)
{
/* Decode an loadagent message */
int debugID, OSinfo1, OSinfo2, subreason;
word loadaddress, nbytes;
word status;
IGNORE(stateptr);
unpack_message(BUFFERDATA(*buffer) + 4, "%w%w%w%w%w%w", &debugID, &OSinfo1,
&OSinfo2, &subreason, &loadaddress, &nbytes);
LogInfo(LOG_CTRL, ( "ctrl_download_agent(loadadr = 0x%x, nbytes = %d)\n",
loadaddress, nbytes));
status = angelOS_LoadAgent(OSinfo1, OSinfo2, loadaddress, nbytes);
if (status == RDIError_NoError)
{
loadagent_address = loadaddress;
loadagent_size = nbytes;
loadagent_sofar = 0;
}
return msgsend(CI_HADP, "%w%w%w%w%w%w",
(ADP_Control | TtoH), debugID, OSinfo1, OSinfo2,
ADP_Ctrl_Download_Agent, status);
}
开发者ID:lawliet89，项目名称:pascal2arm，代码行数:29，代码来源:ctrl.c
注：本文中的IGNORE函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论