• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号

C++ IN6_ARE_ADDR_EQUAL函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中IN6_ARE_ADDR_EQUAL函数的典型用法代码示例。如果您正苦于以下问题:C++ IN6_ARE_ADDR_EQUAL函数的具体用法?C++ IN6_ARE_ADDR_EQUAL怎么用?C++ IN6_ARE_ADDR_EQUAL使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了IN6_ARE_ADDR_EQUAL函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: nm_ip6_manager_get_ip6_config

NMIP6Config *
nm_ip6_manager_get_ip6_config (NMIP6Manager *manager, int ifindex)
{
	NMIP6ManagerPrivate *priv;
	NMIP6Device *device;
	NMIP6Config *config;
	struct rtnl_addr *rtnladdr;
	struct nl_addr *nladdr;
	struct in6_addr *addr;
	NMIP6Address *ip6addr;
	struct rtnl_route *rtnlroute;
	struct nl_addr *nldest, *nlgateway;
	const struct in6_addr *dest, *gateway;
	uint32_t metric;
	NMIP6Route *ip6route;
	int i;

	g_return_val_if_fail (NM_IS_IP6_MANAGER (manager), NULL);
	g_return_val_if_fail (ifindex > 0, NULL);

	priv = NM_IP6_MANAGER_GET_PRIVATE (manager);

	device = (NMIP6Device *) g_hash_table_lookup (priv->devices,
	                                              GINT_TO_POINTER (ifindex));
	if (!device) {
		nm_log_warn (LOGD_IP6, "(%d): addrconf not started.", ifindex);
		return NULL;
	}

	config = nm_ip6_config_new ();
	if (!config) {
		nm_log_err (LOGD_IP6, "(%s): out of memory creating IP6 config object.",
		            device->iface);
		return NULL;
	}

	/* Make sure we refill the route and address caches, otherwise we won't get
	 * up-to-date information here since the netlink route/addr change messages
	 * may be lagging a bit.
	 */
	nl_cache_refill (priv->nlh, priv->route_cache);
	nl_cache_refill (priv->nlh, priv->addr_cache);

	/* Add routes */
	for (rtnlroute = FIRST_ROUTE (priv->route_cache); rtnlroute; rtnlroute = NEXT_ROUTE (rtnlroute)) {
		/* Make sure it's an IPv6 route for this device */
		if (rtnl_route_get_oif (rtnlroute) != device->ifindex)
			continue;
		if (rtnl_route_get_family (rtnlroute) != AF_INET6)
			continue;

		/* And ignore cache/cloned routes as they aren't part of the interface's
		 * permanent routing configuration.
		 */
		if (rtnl_route_get_flags (rtnlroute) & RTM_F_CLONED)
			continue;

		nldest = rtnl_route_get_dst (rtnlroute);
		if (!nldest || nl_addr_get_family (nldest) != AF_INET6)
			continue;
		dest = nl_addr_get_binary_addr (nldest);

		nlgateway = rtnl_route_get_gateway (rtnlroute);
		if (!nlgateway || nl_addr_get_family (nlgateway) != AF_INET6)
			continue;
		gateway = nl_addr_get_binary_addr (nlgateway);

		if (rtnl_route_get_dst_len (rtnlroute) == 0) {
			/* Default gateway route; cache the router's address for later */
			if (!nm_ip6_config_get_gateway (config))
				nm_ip6_config_set_gateway (config, gateway);
			continue;
		}

		/* Also ignore link-local routes where the destination and gateway are
		 * the same, which apparently get added by the kernel but return -EINVAL
		 * when we try to add them via netlink.
		 */
		if (gateway && IN6_ARE_ADDR_EQUAL (dest, gateway))
			continue;

		ip6route = nm_ip6_route_new ();
		nm_ip6_route_set_dest (ip6route, dest);
		nm_ip6_route_set_prefix (ip6route, rtnl_route_get_dst_len (rtnlroute));
		nm_ip6_route_set_next_hop (ip6route, gateway);
		rtnl_route_get_metric(rtnlroute, 1, &metric);
		if (metric != UINT_MAX)
			nm_ip6_route_set_metric (ip6route, metric);
		nm_ip6_config_take_route (config, ip6route);
	}

	/* Add addresses */
	for (rtnladdr = FIRST_ADDR (priv->addr_cache); rtnladdr; rtnladdr = NEXT_ADDR (rtnladdr)) {
		if (rtnl_addr_get_ifindex (rtnladdr) != device->ifindex)
			continue;

		nladdr = rtnl_addr_get_local (rtnladdr);
		if (!nladdr || nl_addr_get_family (nladdr) != AF_INET6)
			continue;

//.........这里部分代码省略.........
开发者ID:alexander-naumov,项目名称:NetworkManager,代码行数:101,代码来源:nm-ip6-manager.c


示例2: udp6_input


//.........这里部分代码省略.........
	pcbinfo = udp_get_inpcbinfo(nxt);
	if (IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst)) {
		struct inpcb *last;
		struct inpcbhead *pcblist;
		struct ip6_moptions *imo;

		INP_INFO_RLOCK(pcbinfo);
		/*
		 * In the event that laddr should be set to the link-local
		 * address (this happens in RIPng), the multicast address
		 * specified in the received packet will not match laddr.  To
		 * handle this situation, matching is relaxed if the
		 * receiving interface is the same as one specified in the
		 * socket and if the destination multicast address matches
		 * one of the multicast groups specified in the socket.
		 */

		/*
		 * KAME note: traditionally we dropped udpiphdr from mbuf
		 * here.  We need udphdr for IPsec processing so we do that
		 * later.
		 */
		pcblist = udp_get_pcblist(nxt);
		last = NULL;
		LIST_FOREACH(inp, pcblist, inp_list) {
			if ((inp->inp_vflag & INP_IPV6) == 0)
				continue;
			if (inp->inp_lport != uh->uh_dport)
				continue;
			if (inp->inp_fport != 0 &&
			    inp->inp_fport != uh->uh_sport)
				continue;
			if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)) {
				if (!IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr,
							&ip6->ip6_dst))
					continue;
			}
			if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
				if (!IN6_ARE_ADDR_EQUAL(&inp->in6p_faddr,
							&ip6->ip6_src) ||
				    inp->inp_fport != uh->uh_sport)
					continue;
			}

			/*
			 * XXXRW: Because we weren't holding either the inpcb
			 * or the hash lock when we checked for a match 
			 * before, we should probably recheck now that the 
			 * inpcb lock is (supposed to be) held.
			 */

			/*
			 * Handle socket delivery policy for any-source
			 * and source-specific multicast. [RFC3678]
			 */
			imo = inp->in6p_moptions;
			if (imo && IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst)) {
				struct sockaddr_in6	 mcaddr;
				int			 blocked;

				INP_RLOCK(inp);

				bzero(&mcaddr, sizeof(struct sockaddr_in6));
				mcaddr.sin6_len = sizeof(struct sockaddr_in6);
				mcaddr.sin6_family = AF_INET6;
				mcaddr.sin6_addr = ip6->ip6_dst;
开发者ID:jaredmcneill,项目名称:freebsd,代码行数:67,代码来源:udp6_usrreq.c


示例3: ip6_tryforward


//.........这里部分代码省略.........
		goto dropin;
	}
	/*
	 * We used slow path processing for packets with scoped addresses.
	 * So, scope checks aren't needed here.
	 */
	if (m->m_pkthdr.len > nh.nh_mtu) {
		in6_ifstat_inc(nh.nh_ifp, ifs6_in_toobig);
		icmp6_error(m, ICMP6_PACKET_TOO_BIG, 0, nh.nh_mtu);
		m = NULL;
		goto dropout;
	}

	/*
	 * Outgoing packet firewall processing.
	 */
	if (!PFIL_HOOKED(&V_inet6_pfil_hook))
		goto passout;
	if (pfil_run_hooks(&V_inet6_pfil_hook, &m, nh.nh_ifp, PFIL_OUT,
	    NULL) != 0 || m == NULL)
		goto dropout;
	/*
	 * If packet filter sets the M_FASTFWD_OURS flag, this means
	 * that new destination or next hop is our local address.
	 * So, we can just go back to ip6_input.
	 *
	 * Also it can forward packet to another destination, e.g.
	 * M_IP6_NEXTHOP flag is set and fwd_tag is attached to mbuf.
	 */
	if (m->m_flags & M_FASTFWD_OURS) {
		/*
		 * XXX: we did one hop and should decrement hop limit. But
		 * now we are the destination and just don't pay attention.
		 */
		return (m);
	}
	/*
	 * Again. A packet filter could change the destination address.
	 */
	ip6 = mtod(m, struct ip6_hdr *);
	if (m->m_flags & M_IP6_NEXTHOP)
		fwd_tag = m_tag_find(m, PACKET_TAG_IPFORWARD, NULL);
	else
		fwd_tag = NULL;

	if (fwd_tag != NULL ||
	    !IN6_ARE_ADDR_EQUAL(&dst.sin6_addr, &ip6->ip6_dst)) {
		if (fwd_tag != NULL) {
			bcopy((fwd_tag + 1), &dst, sizeof(dst));
			m->m_flags &= ~M_IP6_NEXTHOP;
			m_tag_delete(m, fwd_tag);
		} else
			dst.sin6_addr = ip6->ip6_dst;
		/*
		 * Redo route lookup with new destination address
		 */
		if (ip6_findroute(&nh, &dst, m) != 0) {
			m = NULL;
			goto dropout;
		}
	}
passout:
#ifdef IPSTEALTH
	if (!V_ip6stealth)
#endif
	{
		ip6->ip6_hlim -= IPV6_HLIMDEC;
	}

	m_clrprotoflags(m);	/* Avoid confusing lower layers. */
	IP_PROBE(send, NULL, NULL, ip6, nh.nh_ifp, NULL, ip6);

	/*
	 * XXX: we need to use destination address with embedded scope
	 * zone id, because LLTABLE uses such form of addresses for lookup.
	 */
	dst.sin6_addr = nh.nh_addr;
	if (IN6_IS_SCOPE_LINKLOCAL(&dst.sin6_addr))
		dst.sin6_addr.s6_addr16[1] = htons(nh.nh_ifp->if_index & 0xffff);

	error = (*nh.nh_ifp->if_output)(nh.nh_ifp, m,
	    (struct sockaddr *)&dst, NULL);
	if (error != 0) {
		in6_ifstat_inc(nh.nh_ifp, ifs6_out_discard);
		IP6STAT_INC(ip6s_cantforward);
	} else {
		in6_ifstat_inc(nh.nh_ifp, ifs6_out_forward);
		IP6STAT_INC(ip6s_forward);
	}
	return (NULL);
dropin:
	in6_ifstat_inc(rcvif, ifs6_in_discard);
	goto drop;
dropout:
	in6_ifstat_inc(nh.nh_ifp, ifs6_out_discard);
drop:
	if (m != NULL)
		m_freem(m);
	return (NULL);
}
开发者ID:bsd-hacker,项目名称:freebsd,代码行数:101,代码来源:ip6_fastfwd.c


示例4: l2tp_ctrl_purge_ipsec_sa

/** Delete the IPsec SA for disconnection */
static void
l2tp_ctrl_purge_ipsec_sa(l2tp_ctrl *_this)
{
	int is_natt, proto;
	struct sockaddr_storage peer, sock;
	hash_link *hl;
#ifdef USE_LIBSOCKUTIL
	struct in_ipsec_sa_cookie *ipsec_sa_cookie;
#endif
	l2tp_ctrl *anot;

	/*
	 * Search another tunnel that uses the same IPsec SA
	 * by lineer.
	 */
	for (hl = hash_first(_this->l2tpd->ctrl_map);
	    hl != NULL; hl = hash_next(_this->l2tpd->ctrl_map)) {
		anot = hl->item;
		if (anot == _this)
			continue;

		if (_this->peer.ss_family != anot->peer.ss_family)
			continue;
		if (_this->peer.ss_family == AF_INET) {
			if (SIN(&_this->peer)->sin_addr.s_addr !=
			    SIN(&anot->peer)->sin_addr.s_addr)
				continue;
		} else if (_this->peer.ss_family == AF_INET6) {
			if (!IN6_ARE_ADDR_EQUAL(
			    &(SIN6(&_this->peer)->sin6_addr),
			    &(SIN6(&anot->peer)->sin6_addr)))
				continue;
		}
#ifdef USE_LIBSOCKUTIL
		if (_this->sa_cookie != NULL && anot->sa_cookie != NULL) {
			/* Both tunnels belong the same NAT box.  */

			if (memcmp(_this->sa_cookie, anot->sa_cookie,
			    sizeof(struct in_ipsec_sa_cookie)) != 0)
				/* Different hosts behind the NAT box.  */
				continue;

			/* The SA is shared by another tunnels by one host. */
			return;	/* don't purge the sa */

		} else if (_this->sa_cookie != NULL || anot->sa_cookie != NULL)
			/* Only one is behind the NAT */
			continue;
#endif
		return;	/* don't purge the sa */
	}

#if defined(USE_LIBSOCKUTIL)  && defined(IP_IPSEC_SA_COOKIE)
	is_natt = (_this->sa_cookie != NULL)? 1 : 0;
#else
	is_natt = 0;
#endif
	proto = 0;
	memcpy(&peer, &_this->peer, _this->peer.ss_len);
	memcpy(&sock, &_this->sock, _this->sock.ss_len);
	if (!is_natt)
		SIN(&peer)->sin_port = SIN(&sock)->sin_port = 0;
#if defined(USE_LIBSOCKUTIL)  && defined(IP_IPSEC_SA_COOKIE)
	else {
		ipsec_sa_cookie = _this->sa_cookie;
		SIN(&peer)->sin_port = ipsec_sa_cookie->remote_port;
		SIN(&sock)->sin_port = ipsec_sa_cookie->local_port;
#if 1
		/*
		 * XXX: As RFC 2367, protocol sould be specified if the port
		 * XXX: number is non-zero.
		 */
		proto = 0;
#else
		proto = IPPROTO_UDP;
#endif
	}
#endif
	if (ipsec_util_purge_transport_sa((struct sockaddr *)&peer,
	    (struct sockaddr *)&sock, proto, IPSEC_UTIL_DIRECTION_BOTH) != 0)
		l2tp_ctrl_log(_this, LOG_NOTICE, "failed to purge IPSec SA");
}
开发者ID:ajinkya93,项目名称:OpenBSD,代码行数:83,代码来源:l2tp_ctrl.c


示例5: nd6_ns_input


//.........这里部分代码省略.........
				/*
				 * proxy NDP for single entry
				 */
				proxydl = *SDL(&rt_gateway);
				ifa = (struct ifaddr *)in6ifa_ifpforlinklocal(
				    ifp, IN6_IFF_NOTREADY|IN6_IFF_ANYCAST);
				if (ifa)
					proxy = 1;
			}
		}
	}
	if (ifa == NULL) {
		/*
		 * We've got an NS packet, and we don't have that adddress
		 * assigned for us.  We MUST silently ignore it.
		 * See RFC2461 7.2.3.
		 */
		goto freeit;
	}
	myaddr6 = *IFA_IN6(ifa);
	anycast = ((struct in6_ifaddr *)ifa)->ia6_flags & IN6_IFF_ANYCAST;
	tentative = ((struct in6_ifaddr *)ifa)->ia6_flags & IN6_IFF_TENTATIVE;
	if (((struct in6_ifaddr *)ifa)->ia6_flags & IN6_IFF_DUPLICATED)
		goto freeit;

	if (lladdr && ((ifp->if_addrlen + 2 + 7) & ~7) != lladdrlen) {
		nd6log((LOG_INFO, "nd6_ns_input: lladdrlen mismatch for %s "
		    "(if %d, NS packet %d)\n",
		    ip6_sprintf(ip6bufs, &taddr6),
		    ifp->if_addrlen, lladdrlen - 2));
		goto bad;
	}

	if (IN6_ARE_ADDR_EQUAL(&myaddr6, &saddr6)) {
		nd6log((LOG_INFO, "nd6_ns_input: duplicate IP6 address %s\n",
		    ip6_sprintf(ip6bufs, &saddr6)));
		goto freeit;
	}

	/*
	 * We have neighbor solicitation packet, with target address equals to
	 * one of my tentative address.
	 *
	 * src addr	how to process?
	 * ---		---
	 * multicast	of course, invalid (rejected in ip6_input)
	 * unicast	somebody is doing address resolution -> ignore
	 * unspec	dup address detection
	 *
	 * The processing is defined in RFC 2462.
	 */
	if (tentative) {
		/*
		 * If source address is unspecified address, it is for
		 * duplicate address detection.
		 *
		 * If not, the packet is for addess resolution;
		 * silently ignore it.
		 */
		if (IN6_IS_ADDR_UNSPECIFIED(&saddr6))
			nd6_dad_ns_input(ifa, ndopts.nd_opts_nonce);

		goto freeit;
	}

	/*
开发者ID:mulichao,项目名称:freebsd,代码行数:67,代码来源:nd6_nbr.c


示例6: inetport

static int 
inetport(struct Listener* listener)
{
  struct irc_sockaddr lsin;
  int                fd;
  int                opt = 1;

  /*
   * At first, open a new socket
   */
  fd = comm_open(DEF_FAM, SOCK_STREAM, 0, "Listener socket");

#ifdef IPV6
  if (!IN6_ARE_ADDR_EQUAL((struct in6_addr *)&listener->addr, &in6addr_any))
  {
#else
  if (INADDR_ANY != listener->addr.sins.sin.s_addr)
  {
#endif
    inetntop(DEF_FAM, &IN_ADDR(listener->addr), listener->vhost, HOSTLEN);
    listener->name = listener->vhost;
  }

  if (fd == -1)
  {
    report_error(L_ALL, "opening listener socket %s:%s",
                 get_listener_name(listener), errno);
    return 0;
  }
  else if ((HARD_FDLIMIT - 10) < fd)
  {
    report_error(L_ALL, "no more connections left for listener %s:%s",
                 get_listener_name(listener), errno);
    fd_close(fd);
    return 0;
  }
  /*
   * XXX - we don't want to do all this crap for a listener
   * set_sock_opts(listener);
   */
  if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, (char*) &opt, sizeof(opt)))
  {
    report_error(L_ALL, "setting SO_REUSEADDR for listener %s:%s",
                 get_listener_name(listener), errno);
    fd_close(fd);
    return 0;
  }

  /*
   * Bind a port to listen for new connections if port is non-null,
   * else assume it is already open and try get something from it.
   */
  memset(&lsin, 0, sizeof(struct irc_sockaddr));
  S_FAM(lsin) = DEF_FAM;
  copy_s_addr(S_ADDR(lsin), IN_ADDR(listener->addr));
  S_PORT(lsin) = htons(listener->port);


  if (bind(fd, (struct sockaddr*) &SOCKADDR(lsin),
      sizeof(struct irc_sockaddr)))
  {
    report_error(L_ALL, "binding listener socket %s:%s",
                 get_listener_name(listener), errno);
    fd_close(fd);
    return 0;
  }

  if (listen(fd, HYBRID_SOMAXCONN)) {
    report_error(L_ALL, "listen failed for %s:%s",
                 get_listener_name(listener), errno);
    fd_close(fd);
    return 0;
  }

  /*
   * XXX - this should always work, performance will suck if it doesn't
   */
  if (!set_non_blocking(fd))
    report_error(L_ALL, NONB_ERROR_MSG, get_listener_name(listener), errno);

  listener->fd = fd;

  /* Listen completion events are READ events .. */

  accept_connection(fd, listener);
  return 1;
}

static struct Listener* 
find_listener(int port, struct irc_inaddr *addr)
{
  struct Listener* listener = NULL;
  struct Listener* last_closed = NULL;

  for (listener = ListenerPollList; listener; listener = listener->next)
  {

    if ( (port == listener->port) &&
         (!memcmp(&PIN_ADDR(addr),
                 &IN_ADDR(listener->addr),
//.........这里部分代码省略.........
开发者ID:Cloudxtreme,项目名称:ircd-ratbox,代码行数:101,代码来源:listener.c


示例7: map_fix_local_rlocs

static int 
map_fix_local_rlocs(struct locator_chain * lcptr)
{
        int error = EINVAL;
	struct sockaddr_in *rloc_inet = NULL;
	struct sockaddr_in6 *rloc_inet6 = NULL;
	struct in_ifaddr *ia = NULL;
	struct in6_ifaddr *ia6 = NULL;

	while ( lcptr ) {
	       /* Scan the chain checking if the RLOC is the address 
		* of a local interface. 
		*/ 

	        switch (lcptr->rloc.rloc_addr->ss_family) {
      
			case AF_INET:
	
			        rloc_inet = (struct sockaddr_in *) lcptr->rloc.rloc_addr;
				INADDR_TO_IFADDR(rloc_inet->sin_addr, ia); 

				/*
				 * If the address matches, set RLOCF_LIF 
				 * flag and MTU.
				 */
				if ((ia != NULL) &&
				    (IA_SIN(ia)->sin_addr.s_addr == rloc_inet->sin_addr.s_addr)) {
				        lcptr->rloc.rloc_metrix.rlocmtx.flags |= RLOCF_LIF;
					lcptr->rloc.rloc_metrix.rlocmtx.mtu = (ia->ia_ifp)->if_mtu;
					
					error = 0;
  
				};
 
			  
				break;
		    
			case AF_INET6:

			        rloc_inet6 = (struct sockaddr_in6 *) lcptr->rloc.rloc_addr;

			
				ia6 = (struct in6_ifaddr *)ifa_ifwithaddr((struct sockaddr *)(rloc_inet6));



				/*
				 * If the address matches, set RLOCF_LIF 
				 * flag and MTU.
				 */
				if ((ia6 != NULL) &&
				    (IN6_ARE_ADDR_EQUAL(&ia6->ia_addr.sin6_addr,
							&rloc_inet6->sin6_addr))) {

				        lcptr->rloc.rloc_metrix.rlocmtx.flags |= RLOCF_LIF;
					lcptr->rloc.rloc_metrix.rlocmtx.mtu = (ia6->ia_ifp)->if_mtu;
					
					error = 0;
  
				};
				break;

		};

	        lcptr = lcptr->next;

	};

#ifdef LISP_DEBUG
	if (error) {
	        DEBUGLISP("[MAP_FIX_LOCAL_RLOC] No local IF RLOCs Provided for local mapping! \n");
	};
#endif /* LISP_DEBUG */


	return (error);

}  /* map_fix_local_rloc() */
开发者ID:chavula,项目名称:data-plane,代码行数:78,代码来源:maptables.c


示例8: failed_service

static status_e failed_service(struct service *sp, 
                                connection_s *cp, 
                                access_e result)
{
   struct service_config *scp = SVC_CONF( sp ) ;

   if ( result != AC_OK )
   {
      bool_int report_failure = TRUE ;

      /*
       * Try to avoid reporting multiple times a failed attempt to access
       * a datagram-based service from a bad address. We do this because
       * the clients of such services usually send multiple datagrams 
       * before reporting a timeout (we have no way of telling them that
       * their request has been denied).
       */
      if ( result == AC_ADDRESS && SVC_SOCKET_TYPE( sp ) == SOCK_DGRAM )
      {
         if( SC_IPV4( scp ) ) {
            struct sockaddr_in *sinp = SAIN(CONN_ADDRESS( cp )) ;
            struct sockaddr_in *last = SAIN(SVC_LAST_DGRAM_ADDR(sp)) ;
            time_t current_time ;

            if (sinp == NULL )
               return FAILED;

            if ( last == NULL ) {
               last = SAIN( calloc( 1, sizeof(union xsockaddr) ) );
	       SVC_LAST_DGRAM_ADDR(sp) = (union xsockaddr *)last;
            }

            (void) time( &current_time ) ;
            if ( sinp->sin_addr.s_addr == last->sin_addr.s_addr &&
                                          sinp->sin_port == last->sin_port )
            {
               if( current_time - SVC_LAST_DGRAM_TIME(sp) <= DGRAM_IGNORE_TIME )
                  report_failure = FALSE ;
               else
                  SVC_LAST_DGRAM_TIME(sp) = current_time ;
            }
            else
            {
               memcpy(SVC_LAST_DGRAM_ADDR(sp), sinp,sizeof(struct sockaddr_in));
               SVC_LAST_DGRAM_TIME(sp) = current_time ;
            }
         } else if( SC_IPV6( scp ) ) {
            struct sockaddr_in6 *sinp = SAIN6(CONN_ADDRESS( cp )) ;
            struct sockaddr_in6 *last = SAIN6(SVC_LAST_DGRAM_ADDR(sp)) ;
            time_t current_time ;

	    if (sinp == NULL )
               return FAILED;

	    if( last == NULL ) {
               last = SAIN6(calloc( 1, sizeof(union xsockaddr) ) );
	       SVC_LAST_DGRAM_ADDR( sp ) = (union xsockaddr *)last;
            }

            (void) time( &current_time ) ;
            if ( IN6_ARE_ADDR_EQUAL(&(sinp->sin6_addr), &(last->sin6_addr)) && 
                 sinp->sin6_port == last->sin6_port )
            {
               if((current_time - SVC_LAST_DGRAM_TIME(sp)) <= DGRAM_IGNORE_TIME)
                  report_failure = FALSE ;
               else
                  SVC_LAST_DGRAM_TIME(sp) = current_time ;
            }
            else
            {
               memcpy(SVC_LAST_DGRAM_ADDR(sp),sinp,sizeof(struct sockaddr_in6));
               SVC_LAST_DGRAM_TIME(sp) = current_time ;
            }
         }
      }

      if ( report_failure )
         svc_log_failure( sp, cp, result ) ;

      banner_fail(sp, cp);

      return( FAILED ) ;
   }

   return( OK );
}
开发者ID:Veilen,项目名称:xinetd,代码行数:86,代码来源:service.c


示例9: in6_selectsrc


//.........这里部分代码省略.........
	/*
	 * If the destination address is a link-local unicast address or
	 * a link/interface-local multicast address, and if the outgoing
	 * interface is specified by the sin6_scope_id filed, use an address
	 * associated with the interface.
	 * XXX: We're now trying to define more specific semantics of
	 *      sin6_scope_id field, so this part will be rewritten in
	 *      the near future.
	 */
	if ((IN6_IS_ADDR_LINKLOCAL(dst) || IN6_IS_ADDR_MC_LINKLOCAL(dst) ||
	     IN6_IS_ADDR_MC_INTFACELOCAL(dst)) && dstsock->sin6_scope_id) {
		ifp = if_get(dstsock->sin6_scope_id);
		if (ifp == NULL)
			return (ENXIO); /* XXX: better error? */

		ia6 = in6_ifawithscope(ifp, dst, rtableid);
		if_put(ifp);

		if (ia6 == NULL)
			return (EADDRNOTAVAIL);

		*in6src = &ia6->ia_addr.sin6_addr;
		return (0);
	}

	/*
	 * If the destination address is a multicast address and
	 * the outgoing interface for the address is specified
	 * by the caller, use an address associated with the interface.
	 * Even if the outgoing interface is not specified, we also
	 * choose a loopback interface as the outgoing interface.
	 */
	if (IN6_IS_ADDR_MULTICAST(dst)) {
		ifp = mopts ? if_get(mopts->im6o_ifidx) : NULL;

		if (!ifp && dstsock->sin6_scope_id)
			ifp = if_get(htons(dstsock->sin6_scope_id));

		if (ifp) {
			ia6 = in6_ifawithscope(ifp, dst, rtableid);
			if_put(ifp);

			if (ia6 == NULL)
				return (EADDRNOTAVAIL);

			*in6src = &ia6->ia_addr.sin6_addr;
			return (0);
		}
	}

	/*
	 * If route is known or can be allocated now,
	 * our src addr is taken from the i/f, else punt.
	 */
	if (ro) {
		if (!rtisvalid(ro->ro_rt) || (ro->ro_tableid != rtableid) ||
		    !IN6_ARE_ADDR_EQUAL(&ro->ro_dst.sin6_addr, dst)) {
			rtfree(ro->ro_rt);
			ro->ro_rt = NULL;
		}
		if (ro->ro_rt == NULL) {
			struct sockaddr_in6 *sa6;

			/* No route yet, so try to acquire one */
			bzero(&ro->ro_dst, sizeof(struct sockaddr_in6));
			ro->ro_tableid = rtableid;
			sa6 = &ro->ro_dst;
			sa6->sin6_family = AF_INET6;
			sa6->sin6_len = sizeof(struct sockaddr_in6);
			sa6->sin6_addr = *dst;
			sa6->sin6_scope_id = dstsock->sin6_scope_id;
			ro->ro_rt = rtalloc(sin6tosa(&ro->ro_dst),
			    RT_RESOLVE, ro->ro_tableid);
		}

		/*
		 * in_pcbconnect() checks out IFF_LOOPBACK to skip using
		 * the address. But we don't know why it does so.
		 * It is necessary to ensure the scope even for lo0
		 * so doesn't check out IFF_LOOPBACK.
		 */

		if (ro->ro_rt) {
			ifp = if_get(ro->ro_rt->rt_ifidx);
			if (ifp != NULL) {
				ia6 = in6_ifawithscope(ifp, dst, rtableid);
				if_put(ifp);
			}
			if (ia6 == NULL) /* xxx scope error ?*/
				ia6 = ifatoia6(ro->ro_rt->rt_ifa);
		}
		if (ia6 == NULL)
			return (EHOSTUNREACH);	/* no route */

		*in6src = &ia6->ia_addr.sin6_addr;
		return (0);
	}

	return (EADDRNOTAVAIL);
}
开发者ID:ajinkya93,项目名称:OpenBSD,代码行数:101,代码来源:in6_src.c


示例10: reload_config_file

/*
 * Re-Read the configuration file.
 * Return 1 on success, 0 on failure.
 * In case of failure, the old configuration will be unchanged (although the cache may not) and
 * **errstr will refer to a newly allocated string containing an error message.
 */
int reload_config_file(const char *nm, char **errstr)
{
	globparm_t global_new;
	servparm_array servers_new;

	global_new=global;
	global_new.cache_dir=NULL;
	global_new.pidfile=NULL;
	global_new.scheme_file=NULL;
	global_new.deleg_only_zones=NULL;
	global_new.onquery=0;
	servers_new=NULL;
	if(read_config_file(nm,&global_new,&servers_new,0,errstr)) {
		if(global_new.cache_dir && strcmp(global_new.cache_dir,global.cache_dir)) {
			*errstr=strdup("Cannot reload config file: the specified cache_dir directory has changed.\n"
				       "Try restarting pdnsd instead.");
			goto cleanup_return;
		}
		if(global_new.pidfile && (!global.pidfile || strcmp(global_new.pidfile,global.pidfile))) {
			*errstr=strdup("Cannot reload config file: the specified pid_file has changed.\n"
				       "Try restarting pdnsd instead.");
			goto cleanup_return;
		}
		if(global_new.scheme_file && strcmp(global_new.scheme_file,global.scheme_file)) {
			*errstr=strdup("Cannot reload config file: the specified scheme_file has changed.\n"
				       "Try restarting pdnsd instead.");
			goto cleanup_return;
		}
		if(global_new.port!=global.port) {
			*errstr=strdup("Cannot reload config file: the specified server_port has changed.\n"
				       "Try restarting pdnsd instead.");
			goto cleanup_return;
		}
		if(!ADDR_EQUIV(&global_new.a,&global.a)) {
			*errstr=strdup("Cannot reload config file: the specified interface address (server_ip) has changed.\n"
				       "Try restarting pdnsd instead.");
			goto cleanup_return;
		}
#ifdef ENABLE_IPV6
		if(!IN6_ARE_ADDR_EQUAL(&global_new.ipv4_6_prefix,&global.ipv4_6_prefix)) {
			*errstr=strdup("Cannot reload config file: the specified ipv4_6_prefix has changed.\n"
				       "Try restarting pdnsd instead.");
			goto cleanup_return;
		}
#endif
		if(strcmp(global_new.run_as,global.run_as)) {
			*errstr=strdup("Cannot reload config file: the specified run_as id has changed.\n"
				       "Try restarting pdnsd instead.");
			goto cleanup_return;
		}
		if(global_new.daemon!=global.daemon) {
			*errstr=strdup("Cannot reload config file: the daemon option has changed.\n"
				       "Try restarting pdnsd instead.");
			goto cleanup_return;
		}
		if(global_new.debug!=global.debug) {
			*errstr=strdup("Cannot reload config file: the debug option has changed.\n"
				       "Try restarting pdnsd instead.");
			goto cleanup_return;
		}
		if(global_new.stat_pipe!=global.stat_pipe) {
			*errstr=strdup("Cannot reload config file: the status_ctl option has changed.\n"
				       "Try restarting pdnsd instead.");
			goto cleanup_return;
		}
		if(global_new.notcp!=global.notcp) {
			*errstr=strdup("Cannot reload config file: the tcp_server option has changed.\n"
				       "Try restarting pdnsd instead.");
			goto cleanup_return;
		}
		if(global_new.strict_suid!=global.strict_suid) {
			*errstr=strdup("Cannot reload config file: the strict_setuid option has changed.\n"
				       "Try restarting pdnsd instead.");
			goto cleanup_return;
		}
		if(global_new.ctl_perms!=global.ctl_perms) {
			*errstr=strdup("Cannot reload config file: the specified ctl_perms has changed.\n"
				       "Try restarting pdnsd instead.");
			goto cleanup_return;
		}
		if(ping_isocket==-1
#ifdef ENABLE_IPV6
		   && ping6_isocket==-1
#endif
		  ) {
			int i,n=DA_NEL(servers_new);
			for (i=0;i<n;++i) {
				if (DA_INDEX(servers_new,i).uptest==C_PING) {
					if(asprintf(errstr,"Cannot reload config file: the ping socket is not initialized"
						    " and the new config contains uptest=ping in server section %i.\n"
						    "Try restarting pdnsd instead.",i)<0)
						*errstr=NULL;
					goto cleanup_return;
				}
//.........这里部分代码省略.........
开发者ID:Leon1108,项目名称:shadowsocks-android,代码行数:101,代码来源:conff.c


示例11: insertRoute


//.........这里部分代码省略.........
            // No location set, so insert in on the table top.
            routing_table = newroute;
            IF_DEBUG atlog(LOG_DEBUG, 0, "No routes in table. Insert at beginning.");
        }
        else 
        {
            IF_DEBUG atlog(LOG_DEBUG, 0, "Found existing routes. Find insert location.");

            // Check if the route could be inserted at the beginning...
            if( memcmp(&routing_table->group, group, sizeof(struct in6_addr)) > 0 ) 
            {
                //IF_DEBUG atlog(LOG_DEBUG, 0, "Inserting at beginning, before route %s",inetFmt(routing_table->group,s1));

                // Insert at beginning...
                newroute->nextroute = routing_table;
                newroute->prevroute = NULL;
                routing_table = newroute;

                // If the route has a next node, the previous pointer must be updated.
                if(newroute->nextroute != NULL) 
                {
                    newroute->nextroute->prevroute = newroute;
                }

            } 
            else 
            {
                // Find the location which is closest to the route.
                for( croute = routing_table; croute->nextroute != NULL; croute = croute->nextroute ) 
                {
                    // Find insert position.
                    if( memcmp( &(croute->nextroute->group), group, sizeof(struct in6_addr) ) > 0 ) 
                        break;
                }

                //IF_DEBUG atlog(LOG_DEBUG, 0, "Inserting after route %s",inetFmt(croute->group,s1));
                
                // Insert after current...
                newroute->nextroute = croute->nextroute;
                newroute->prevroute = croute;
                if(croute->nextroute != NULL) 
                {
                    croute->nextroute->prevroute = newroute; 
                }
                croute->nextroute = newroute;
            }
        }

        // Set the new route as the current...
        croute = newroute;

     
        if( !IN6_ARE_ADDR_EQUAL( &croute->originAddr, &allzero_addr) ) 
        {
            // Update route in kernel...
            if( !internUpdateKernelRoute(croute, 1) ) 
            {
                atlog(LOG_WARNING, 0, "The insertion into Kernel failed.");
                return 0;
            }
        }    
    } 
    else if(from->sin6_scope_id >= 0) 
    {
        if( !IN6_ARE_ADDR_EQUAL( &croute->originAddr, &allzero_addr) ) 
        {
            // The route exists already, so just update it.
            BIT_SET(croute->vifBits, from->sin6_scope_id);
            
            // Register the VIF activity for the aging routine
            BIT_SET(croute->ageVifBits, from->sin6_scope_id);
        }
        else
        {
            tmpRoute = findNextRoute(group, NULL);
            while (tmpRoute != NULL)
            {
                // The route exists already, so just update it.
                BIT_SET(tmpRoute->vifBits, from->sin6_scope_id);
                
                // Register the VIF activity for the aging routine
                BIT_SET(tmpRoute->ageVifBits, from->sin6_scope_id);
                if (tmpRoute->nextroute)
                    tmpRoute = findNextRoute(group, tmpRoute->nextroute);  
                else
                    break;
            }
        }
    }

    // Send join message upstream, if the route has no joined flag...
    if(croute->upstrState != ROUTESTATE_JOINED)
    {
        // Send Join request upstream
        sendJoinLeaveUpstream(croute, 1);
    }

    IF_DEBUG atlogRouteTable("Insert Route");
    return 1;
}
开发者ID:springware,项目名称:92u10,代码行数:101,代码来源:rttable.c


示例12: process_nduseropt_rdnss

static gboolean
process_nduseropt_rdnss (NMIP6Device *device, struct nd_opt_hdr *opt)
{
	size_t opt_len;
	struct nd_opt_rdnss *rdnss_opt;
	time_t now = time (NULL);
	struct in6_addr *addr;
	GArray *new_servers;
	NMIP6RDNSS server, *cur_server;
	gboolean changed = FALSE;
	guint i;

	opt_len = opt->nd_opt_len;

	if (opt_len < 3 || (opt_len & 1) == 0)
		return FALSE;

	rdnss_opt = (struct nd_opt_rdnss *) opt;

	new_servers = g_array_new (FALSE, FALSE, sizeof (NMIP6RDNSS));

	/* Pad the DNS server expiry somewhat to give a bit of slack in cases
	 * where one RA gets lost or something (which can happen on unreliable
	 * links like WiFi where certain types of frames are not retransmitted).
	 * Note that 0 has special meaning and is therefore not adjusted.
	 */
	server.expires = ntohl (rdnss_opt->nd_opt_rdnss_lifetime);
	if (server.expires > 0)
		if (server.expires < 7200)
			server.expires = 7200;
		server.expires += now;

	for (addr = (struct in6_addr *) (rdnss_opt + 1); opt_len >= 2; addr++, opt_len -= 2) {
		char buf[INET6_ADDRSTRLEN + 1];

		if (!inet_ntop (AF_INET6, addr, buf, sizeof (buf))) {
			nm_log_warn (LOGD_IP6, "(%s): received invalid RA-provided nameserver", device->iface);
			continue;
		}

		/* Update the cached timeout if we already saw this server */
		for (i = 0; i < device->rdnss_servers->len; i++) {
			cur_server = &(g_array_index (device->rdnss_servers, NMIP6RDNSS, i));

			if (!IN6_ARE_ADDR_EQUAL (addr, &cur_server->addr))
				continue;

			cur_server->expires = server.expires;

			if (server.expires > 0) {
				nm_log_dbg (LOGD_IP6, "(%s): refreshing RA-provided nameserver %s (expires in %ld seconds)",
				            device->iface, buf,
				            server.expires - now);
				break;
			}

			nm_log_dbg (LOGD_IP6, "(%s): removing RA-provided nameserver %s on router request",
			            device->iface, buf);

			g_array_remove_index (device->rdnss_servers, i);
			changed = TRUE;
			break;
		}

		if (server.expires == 0)
			continue;
		if (i < device->rdnss_servers->len)
			continue;

		nm_log_dbg (LOGD_IP6, "(%s): found RA-provided nameserver %s (expires in %ld seconds)",
		            device->iface, buf, server.expires - now);

		server.addr = *addr;
		g_array_append_val (new_servers, server);
	}

	/* New servers must be added in the order they are listed in the
	 * RA option and before any existing servers.
	 *
	 * Note: This is the place to remove servers if we want to cap the
	 *       number of resolvers. The RFC states that the one to expire
	 *       first of the existing servers should be removed.
	 */
	if (new_servers->len) {
		g_array_prepend_vals (device->rdnss_servers,
		                      new_servers->data, new_servers->len);
		changed = TRUE;
	}

	g_array_free (new_servers, TRUE);

	/* Timeouts may have changed even if IPs didn't */
	set_rdnss_timeout (device);

	return changed;
}
开发者ID:alexander-naumov,项目名称:NetworkManager,代码行数:96,代码来源:nm-ip6-manager.c


示例13: ip6_forward


//.........这里部分代码省略.........
	if (!srcrt) {
		/*
		 * ip6forward_rt->ro_dst.sin6_addr is equal to ip6->ip6_dst
		 */
		if (ROUTE_UNUSABLE(ip6forward_rt)) {
			if (rt != NULL) {
				/* Release extra ref */
				RT_REMREF_LOCKED(rt);
				RT_UNLOCK(rt);
			}
			ROUTE_RELEASE(ip6forward_rt);

			/* this probably fails but give it a try again */
			rtalloc_scoped_ign((struct route *)ip6forward_rt,
			    RTF_PRCLONING, ifscope);
			if ((rt = ip6forward_rt->ro_rt) != NULL) {
				RT_LOCK(rt);
				/* Take an extra ref for ourselves */
				RT_ADDREF_LOCKED(rt);
			}
		}

		if (rt == NULL) {
			ip6stat.ip6s_noroute++;
			in6_ifstat_inc(m->m_pkthdr.rcvif, ifs6_in_noroute);
			if (mcopy)
				icmp6_error(mcopy, ICMP6_DST_UNREACH,
					    ICMP6_DST_UNREACH_NOROUTE, 0);
			m_freem(m);
			return (NULL);
		}
		RT_LOCK_ASSERT_HELD(rt);
	} else if (ROUTE_UNUSABLE(ip6forward_rt) ||
	    !IN6_ARE_ADDR_EQUAL(&ip6->ip6_dst, &dst->sin6_addr)) {
		if (rt != NULL) {
			/* Release extra ref */
			RT_REMREF_LOCKED(rt);
			RT_UNLOCK(rt);
		}
		ROUTE_RELEASE(ip6forward_rt);

		bzero(dst, sizeof(*dst));
		dst->sin6_len = sizeof(struct sockaddr_in6);
		dst->sin6_family = AF_INET6;
		dst->sin6_addr = ip6->ip6_dst;

		rtalloc_scoped_ign((struct route *)ip6forward_rt,
		    RTF_PRCLONING, ifscope);
		if ((rt = ip6forward_rt->ro_rt) == NULL) {
			ip6stat.ip6s_noroute++;
			in6_ifstat_inc(m->m_pkthdr.rcvif, ifs6_in_noroute);
			if (mcopy)
				icmp6_error(mcopy, ICMP6_DST_UNREACH,
				    ICMP6_DST_UNREACH_NOROUTE, 0);
			m_freem(m);
			return (NULL);
		}
		RT_LOCK(rt);
		/* Take an extra ref for ourselves */
		RT_ADDREF_LOCKED(rt);
	}

	/*
	 * Source scope check: if a packet can't be delivered to its
	 * destination for the reason that the destination is beyond the scope
	 * of the source address, discard the packet and return an icmp6
开发者ID:JackieXie168,项目名称:xnu,代码行数:67,代码来源:ip6_forward.c


示例14: nd6_ns_input


//.........这里部分代码省略.........
				 * target mac, else our mac is used.
				 */
				if (cmpifp == rtifp &&
				    (rt->rt_flags & RTF_ANNOUNCE) &&
				    rt->rt_gateway->sa_family == AF_LINK) {
					proxydl = SDL(rt->rt_gateway);
				}
			}
		}
		if (rt != NULL)
			--rt->rt_refcnt;
	}
	if (ifa == NULL) {
		/*
		 * We've got an NS packet, and we don't have that adddress
		 * assigned for us.  We MUST silently ignore it.
		 * See RFC2461 7.2.3.
		 */
		goto freeit;
	}
	myaddr6 = *IFA_IN6(ifa);
	anycast = ((struct in6_ifaddr *)ifa)->ia6_flags & IN6_IFF_ANYCAST;
	tentative = ((struct in6_ifaddr *)ifa)->ia6_flags & IN6_IFF_TENTATIVE;
	if (((struct in6_ifaddr *)ifa)->ia6_flags & IN6_IFF_DUPLICATED)
		goto freeit;

	if (lladdr && ((cmpifp->if_addrlen + 2 + 7) & ~7) != lladdrlen) {
		nd6log((LOG_INFO, "nd6_ns_input: lladdrlen mismatch for %s "
		    "(if %d, NS packet %d)\n",
		    ip6_sprintf(&taddr6), cmpifp->if_addrlen, lladdrlen - 2));
		goto bad;
	}

	if (IN6_ARE_ADDR_EQUAL(&myaddr6, &saddr6)) {
		nd6log((LOG_INFO, "nd6_ns_input: duplicate IP6 address %s\n",
		    ip6_sprintf(&saddr6)));
		goto freeit;
	}

	/*
	 * We have neighbor solicitation packet, with target address equals to
	 * one of my tentative address.
	 *
	 * src addr	how to process?
	 * ---		---
	 * multicast	of course, invalid (rejected in ip6_input)
	 * unicast	somebody is doing address resolution -> ignore
	 * unspec	dup address detection
	 *
	 * The processing is defined in RFC 2462.
	 */
	if (tentative) {
		/*
		 * If source address is unspecified address, it is for
		 * duplicated address detection.
		 *
		 * If not, the packet is for addess resolution;
		 * silently ignore it.
		 */
		if (IN6_IS_ADDR_UNSPECIFIED(&saddr6))
			nd6_dad_ns_input(ifa);

		goto freeit;
	}

	/*
开发者ID:iHaD,项目名称:DragonFlyBSD,代码行数:67,代码来源:nd6_nbr.c


示例15: sctp_ire_cache_flush

/*
 * Walk the SCTP global list and refrele the ire for this ipif
 * This is called when an address goes down, so that we release any reference
 * to the ire associated with this address. Additionally, for any SCTP if
 * this was the only/last address in its source list, we don't kill the
 * assoc., if there is no address added subsequently, or if this does not
 * come up, then the assoc. will die a natural death (i.e. timeout).
 */
void
sctp_ire_cache_flush(ipif_t *ipif)
{
	sctp_t			*sctp;
	sctp_t			*sctp_prev = NULL;
	sctp_faddr_t		*fp;
	conn_t			*connp;
	ire_t			*ire;

	sctp = gsctp;
	mutex_enter(&sctp_g_lock);
	while (sctp != NULL) {
		mutex_enter(&sctp->sctp_reflock);
		if (sctp->sctp_condemned) {
			mutex_exit(&sctp->sctp_reflock);
			sctp = list_next(&sctp_g_list, sctp);
			continue;
		}
		sctp->sctp_refcnt++;
		mutex_exit(&sctp->sctp_reflock);
		mutex_exit(&sctp_g_lock);
		if (sctp_prev != NULL)
			SCTP_REFRELE(sctp_prev);

		RUN_SCTP(sctp);
		connp = sctp->sctp_connp;
		mutex_enter(&connp->conn_lock);
		ire = connp->conn_ire_cache;
		if (ire != NULL && ire->ire_ipif == ipif) {
			connp->conn_ire_cache = NULL;
			mutex_exit(&connp->conn_lock);
			IRE_REFRELE_NOTR(ire);
		} else {
			mutex_exit(&connp->conn_lock);
		}
		/* check for ires cached in faddr */
		for (fp = sctp->sctp_faddrs; fp != NULL; fp = fp->next) {
			/*
			 * If this ipif is being used as the source address
			 * we need to update it as well, else we will end
			 * up using the dead source address.
			 */
			ire = fp->ire;
			if (ire != NULL && ire->ire_ipif == ipif) {
				fp->ire = NULL;
				IRE_REFRELE_NOTR(ire);
			}
			/*
			 * This may result in setting the fp as unreachable,
			 * i.e. if all the source addresses are down. In
			 * that case the assoc. would timeout.
			 */
			if (IN6_ARE_ADDR_EQUAL(&ipif->ipif_v6lcl_addr,
			    &fp->saddr)) {
				sctp_set_saddr(sctp, fp);
				if (fp == sctp->sctp_current &&
				    fp->state != SCTP_FADDRS_UNREACH) {
					sctp_set_faddr_current(sctp, fp);
				}
			}
		}
		WAKE_SCTP(sctp);
		sctp_prev = sctp;
		mutex_enter(&sctp_g_lock);
		sctp = list_next(&sctp_g_list, sctp);
	}
	mutex_exit(&sctp_g_lock);
	if (sctp_prev != NULL)
		SCTP_REFRELE(sctp_prev);
}
开发者ID:andreiw,项目名称:polaris,代码行数:78,代码来源:sctp_hash.c


示例16: v6_v6_equal

static gboolean
v6_v6_equal (const struct sockaddr_in6 *a,
	     const struct sockaddr_in6 *b)
{
	return IN6_ARE_ADDR_EQUAL (&a->sin6_addr, &b->sin6_addr);
}
开发者ID:Distrotech,项目名称:gnome-vfs,代码行数:6,代码来源:gnome-vfs-address.c


示例17: processNS


//.........这里部分 

鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ IN6_IS_ADDR_LINKLOCAL函数代码示例发布时间:2022-05-30
下一篇:
C++ IN0函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap