本文整理汇总了C++中INS_Address函数的典型用法代码示例。如果您正苦于以下问题：C++ INS_Address函数的具体用法？C++ INS_Address怎么用？C++ INS_Address使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了INS_Address函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: instrument_stride
/* instrumenting (instruction level) */
VOID instrument_stride(INS ins, VOID* v){
UINT32 index;
if( INS_IsMemoryRead(ins) ){ // instruction has memory read operand
index = stride_index_memRead1(INS_Address(ins));
INS_InsertCall(ins, IPOINT_BEFORE, (AFUNPTR)readMem_stride, IARG_UINT32, index, IARG_MEMORYREAD_EA, IARG_MEMORYREAD_SIZE, IARG_END);
if( INS_HasMemoryRead2(ins) ){ // second memory read operand
index = stride_index_memRead2(INS_Address(ins));
INS_InsertCall(ins, IPOINT_BEFORE, (AFUNPTR)readMem_stride, IARG_UINT32, index, IARG_MEMORYREAD2_EA, IARG_MEMORYREAD_SIZE, IARG_END);
}
}
if( INS_IsMemoryWrite(ins) ){ // instruction has memory write operand
index = stride_index_memWrite(INS_Address(ins));
INS_InsertCall(ins, IPOINT_BEFORE, (AFUNPTR)writeMem_stride, IARG_UINT32, index, IARG_MEMORYWRITE_EA, IARG_MEMORYWRITE_SIZE, IARG_END);
}
/* inserting calls for counting instructions (full) is done in mica.cpp */
if(interval_size != -1){
INS_InsertIfCall(ins, IPOINT_BEFORE, (AFUNPTR)stride_instr_intervals, IARG_END);
INS_InsertThenCall(ins, IPOINT_BEFORE, (AFUNPTR)stride_instr_interval, IARG_END);
}
}
开发者ID:Caian，项目名称:MICA，代码行数:30，代码来源:mica_stride.cpp
示例2: Instruction
VOID Instruction(INS ins, VOID *v)
{
for (REG reg=REG_XMM_BASE; reg <= REG_XMM_LAST;
reg=static_cast<REG>((static_cast<INT32>(reg)+1)))
{
if (INS_RegRContain(ins, reg))
{
INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(TestXmm),
IARG_INST_PTR,
IARG_REG_REFERENCE, reg,
IARG_REG_REFERENCE, REG_XMM1,
IARG_ADDRINT, READ,
IARG_ADDRINT, (reg-REG_XMM_BASE),
IARG_END);
fprintf(outfile,"Instrumented read on ins %p %s\n", (void *)(INS_Address(ins)), INS_Disassemble(ins).c_str());
fflush (outfile);
}
if (INS_RegWContain(ins, reg))
{
INS_InsertCall(ins, IPOINT_AFTER, AFUNPTR(TestXmm),
IARG_INST_PTR,
IARG_REG_REFERENCE, reg,
IARG_REG_REFERENCE, REG_XMM1,
IARG_ADDRINT, WRITE,
IARG_ADDRINT, (reg-REG_XMM_BASE),
IARG_END);
fprintf(outfile,"Instrumented write on ins %p %s\n", (void *)(INS_Address(ins)), INS_Disassemble(ins).c_str());
fflush (outfile);
}
}
}
开发者ID:alugupta，项目名称:resilient-systems，代码行数:33，代码来源:xmmtest.cpp
示例3: Image
VOID Image(IMG img, void *v)
{
for (SEC sec = IMG_SecHead(img); SEC_Valid(sec); sec = SEC_Next(sec))
{
for (RTN rtn = SEC_RtnHead(sec); RTN_Valid(rtn); rtn = RTN_Next(rtn))
{
RTN_Open(rtn);
numRtnsFoundInImageCallback++;
INS ins = RTN_InsHeadOnly(rtn);
if (INS_Invalid() == ins)
{ // no instruction found - assert that RTN_InsHead(rtn) also doesn't find any INS
ASSERTX (INS_Invalid() == RTN_InsHead(rtn));
RTN_Close(rtn);
continue;
}
if (INS_HasFallThrough(ins))
{
ADDRINT insAddress = INS_Address(ins);
numRtnsInstrumentedFromImageCallback++;
RTN_InsertCall( rtn, IPOINT_BEFORE, AFUNPTR(AtRtn), IARG_ADDRINT, RTN_Address(rtn), IARG_END);
INS_InsertCall (ins, IPOINT_BEFORE, AFUNPTR(BeforeInsHeadOnly), IARG_ADDRINT, INS_Address(ins), IARG_END);
INS_InsertCall (ins, IPOINT_AFTER, AFUNPTR(AfterInsHeadOnly), IARG_ADDRINT, INS_Address(ins), IARG_END);
ins = RTN_InsHead(rtn);
ASSERTX(INS_Invalid() != ins);
ASSERTX(INS_Address(ins)==insAddress);
INS_InsertCall (ins, IPOINT_BEFORE, AFUNPTR(BeforeInsHead), IARG_ADDRINT, insAddress, IARG_END);
INS_InsertCall (ins, IPOINT_AFTER, AFUNPTR(AfterInsHead), IARG_ADDRINT, insAddress, IARG_END);
}
RTN_Close(rtn);
}
}
}
开发者ID:FengXingYuXin，项目名称:SHMA，代码行数:34，代码来源:rtn_insert_call1.cpp
示例4: Trace
VOID Trace (TRACE trace, VOID *v)
{
for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
{
for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
{
xed_iclass_enum_t iclass1 = static_cast<xed_iclass_enum_t>(INS_Opcode(ins));
if (iclass1 == XED_ICLASS_FLD1 && INS_Valid(INS_Next(ins)))
{
xed_iclass_enum_t iclass2 = static_cast<xed_iclass_enum_t>(INS_Opcode(INS_Next(ins)));
if (iclass2 == XED_ICLASS_FLD1 && INS_Valid(INS_Next(INS_Next(ins))))
{
xed_iclass_enum_t iclass3 = static_cast<xed_iclass_enum_t>(INS_Opcode(INS_Next(INS_Next(ins))));
if (iclass3 == XED_ICLASS_FLD1)
{
printf ("found fld1 sequence at %lx\n", (unsigned long)(INS_Address(INS_Next(INS_Next(ins)))));
if (testNum == 0)
{
INS_InsertCall(INS_Next(INS_Next(ins)), IPOINT_AFTER, AFUNPTR(CallToUnMaskZeroDivideInMxcsr), IARG_END);
printf ("Inserted call1 to UnMaskZeroDivideInMxcsr after instruction at %lx\n",
(unsigned long)(INS_Address(INS_Next(INS_Next(ins)))));
testNum++;
}
return;
}
}
}
}
}
}
开发者ID:herjmoo，项目名称:research，代码行数:30，代码来源:test_iarg_preserve_mxcsr.cpp
示例5: Trace
VOID Trace(TRACE trace, VOID *v)
{
const INS beginIns = BBL_InsHead(TRACE_BblHead(trace));
const INS endIns = BBL_InsTail(TRACE_BblTail(trace));
const ADDRINT beginAddr = INS_Address(beginIns);
const ADDRINT endAddr = INS_Address(endIns) + INS_Size(endIns) - 1;
sandbox.CheckAddressRange(reinterpret_cast<const char *>(beginAddr), reinterpret_cast<const char *>(endAddr));
}
开发者ID:aarony，项目名称:arm-v7a-pintool，代码行数:9，代码来源:fence.C
示例6: instrument_ppm_cond_br
VOID instrument_ppm_cond_br(INS ins){
UINT32 index = index_condBr(INS_Address(ins));
if(index < 1){
/* We don't know the number of static conditional branch instructions up front,
* so we double the size of the branch history tables as needed by calling this function */
if(numStatCondBranchInst >= brHist_size)
reallocate_brHist();
index = numStatCondBranchInst;
register_condBr(INS_Address(ins));
}
INS_InsertCall(ins, IPOINT_BEFORE, (AFUNPTR)condBr, IARG_UINT32, index, IARG_BRANCH_TAKEN, IARG_END);
}
开发者ID:itkovian，项目名称:MICA，代码行数:15，代码来源:mica_ppm.cpp
示例7: Instruction
VOID Instruction(INS ins, VOID *v)
{
ADDRINT loc = INS_Address(ins);
if (gLogStart != -1 && loc == gLogStart)
{
INS_InsertCall(ins,
IPOINT_BEFORE,
(AFUNPTR)StartLogging,
IARG_INST_PTR,
IARG_END);
}
if (gLogStop != -1 && loc == gLogStop)
{
INS_InsertCall(ins,
IPOINT_BEFORE,
(AFUNPTR)StopLogging,
IARG_INST_PTR,
IARG_END);
}
if (loc >= moduleStart && loc <= moduleEnd)
{
INS_InsertCall(ins,
IPOINT_BEFORE,
(AFUNPTR)IncrementCount,
IARG_INST_PTR,
IARG_END);
}
}
开发者ID:TechLord-Forever，项目名称:IDAPinLogger，代码行数:30，代码来源:IDAPinLogger.cpp
示例8: Trace
VOID Trace(TRACE trace, VOID *v)
{
for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
{
DBG_PRINT(printf("Inst: Sequence address %p\n",(CHAR*)(INS_Address(BBL_InsHead(bbl)))));
for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
{
DBG_PRINT(printf("Inst: %p\n",(CHAR*)(INS_Address(ins))));
INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(docount_ins), IARG_INST_PTR, IARG_END);
}
INT32 icount = BBL_NumIns(bbl);
DBG_PRINT(printf("Inst: -> control flow change (bbl size %d)\n", icount));
INS_InsertCall(BBL_InsTail(bbl), IPOINT_BEFORE, AFUNPTR(docount_bbl_ins), IARG_INST_PTR, IARG_UINT32, icount, IARG_END);
}
}
开发者ID:aarony，项目名称:arm-v7a-pintool，代码行数:16，代码来源:icountcheck.C
示例9: Trace
VOID Trace (TRACE trace, VOID *v)
{
for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
{
for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
{
xed_iclass_enum_t iclass1 = static_cast<xed_iclass_enum_t>(INS_Opcode(ins));
if (iclass1 == XED_ICLASS_FLD1 && INS_Valid(INS_Next(ins)))
{
xed_iclass_enum_t iclass2 = static_cast<xed_iclass_enum_t>(INS_Opcode(INS_Next(ins)));
if (iclass2 == XED_ICLASS_FLD1 && INS_Valid(INS_Next(INS_Next(ins))))
{
xed_iclass_enum_t iclass3 = static_cast<xed_iclass_enum_t>(INS_Opcode(INS_Next(INS_Next(ins))));
if (iclass3 == XED_ICLASS_FLD1)
{
printf ("tool: found fld1 sequence at %p\n", (void *)INS_Address(INS_Next(INS_Next(ins))));
fflush (stdout);
// Insert an analysis call that will cause the xmm scratch registers to be spilled
INS_InsertCall(INS_Next(INS_Next(ins)), IPOINT_AFTER, (AFUNPTR)SetXmmScratchesFun, IARG_END);
return;
}
}
}
}
}
}
开发者ID:alagenchev，项目名称:school_code，代码行数:26，代码来源:set_fp_context_ymm_regs_xmms_spilled.cpp
示例10: INS_Address
// record the page(s) occupied by the instruction
VOID SANDBOX::RecordIns(INS ins)
{
const ADDRINT beginAddr = INS_Address(ins);
const ADDRINT endAddr = beginAddr + INS_Size(ins) - 1;
RecordAddressRange(reinterpret_cast<const char *>(beginAddr), reinterpret_cast<const char *>(endAddr));
}
开发者ID:aarony，项目名称:arm-v7a-pintool，代码行数:8，代码来源:fence.C
示例11: dumpInstruction
/**
* Converts a PIN instruction object into a disassembled string.
**/
std::string dumpInstruction(INS ins)
{
std::stringstream ss;
ADDRINT address = INS_Address(ins);
// Generate address and module information
ss << "0x" << setfill('0') << setw(8) << uppercase << hex << address << "::" << getModule(address) << " ";
// Generate instruction byte encoding
for (int i=0;i<INS_Size(ins);i++)
{
ss << setfill('0') << setw(2) << (((unsigned int) *(unsigned char*)(address + i)) & 0xFF) << " ";
}
for (int i=INS_Size(ins);i<8;i++)
{
ss << " ";
}
// Generate diassembled string
ss << INS_Disassemble(ins);
// Look up call information for direct calls
if (INS_IsCall(ins) && INS_IsDirectBranchOrCall(ins))
{
ss << " -> " << RTN_FindNameByAddress(INS_DirectBranchOrCallTargetAddress(ins));
}
return ss.str();
}
开发者ID:JaonLin，项目名称:pin-tools，代码行数:34，代码来源:shellcode.cpp
示例12: Instruction
// Is called for every instruction and instruments reads and writes
VOID Instruction(INS ins, VOID *v)
{
BOOL hasReadSegmentedMemAccess = FALSE;
BOOL hasWriteSegmentedMemAccess = FALSE;
if (INS_SegmentRegPrefix(ins) == TESTED_SEG_REG)
//INS_OperandMemorySegmentReg, INS_SegPrefixIsMemoryRead, INS_OperandMemoryDisplacement
{
if (INS_IsMemoryRead(ins))
{
HandleAccess (ins, TRUE /* isRead*/, &hasReadSegmentedMemAccess) ;
}
if (INS_IsMemoryWrite(ins))
{
HandleAccess (ins, FALSE /* isRead*/, &hasWriteSegmentedMemAccess);
}
if (!hasReadSegmentedMemAccess && !hasWriteSegmentedMemAccess)
{
fprintf(trace, "**ERROR SegMemAccess-Lies %p %s\n", INS_Address(ins), INS_Disassemble(ins).c_str());
hadError = TRUE;
}
}
/*fprintf(trace, "%p %s\n", INS_Address(ins), INS_Disassemble(ins).c_str());
fflush (trace);*/
}
开发者ID:FengXingYuXin，项目名称:SHMA，代码行数:29，代码来源:segmented_ea_verifier.cpp
示例13: Instruction
static void Instruction(INS ins, void *v)
{
INS_InsertPredicatedCall(
ins, IPOINT_BEFORE,
(AFUNPTR)do_count,
IARG_END);
// Filters out non memory reference instructions.
if (!INS_IsMemoryRead(ins) && !INS_IsMemoryWrite(ins))
return;
// Filters out references to stack.
if (INS_IsStackRead(ins) || INS_IsStackWrite(ins))
return;
// Filters out instructions out of main executable.
IMG img = IMG_FindByAddress(INS_Address(ins));
if (!IMG_Valid(img) || !IMG_IsMainExecutable(img))
return;
unsigned i;
unsigned int mem_op = INS_MemoryOperandCount(ins);
for (i = 0; i < mem_op; i++) {
INS_InsertPredicatedCall(
ins, IPOINT_BEFORE,
(AFUNPTR)check_addr,
IARG_INST_PTR,
IARG_MEMORYOP_EA, i, IARG_END);
}
}
开发者ID:ha2398，项目名称:pintool-available-parallelism，代码行数:31，代码来源:pinap.cpp
示例14: modifyAddressing
// Offset the addressing of the first "or" instruction back by 4 bytes.
static VOID modifyAddressing (RTN rtn)
{
for (INS ins = RTN_InsHead(rtn); INS_Valid(ins); ins = INS_Next(ins))
{
if (INS_Opcode(ins) == XED_ICLASS_OR)
{
printf ("Rewriting address of ins\n%x: %s\n", INS_Address(ins), INS_Disassemble(ins).c_str());
// pass the original memory address accessed by the app instruction (i.e. before the rewrite) to AddrValueA
INS_InsertCall(ins, IPOINT_BEFORE,
AFUNPTR(AddrValueA),
IARG_MEMORYOP_EA, 0, IARG_END);
INS_InsertCall(ins, IPOINT_BEFORE,
AFUNPTR(returnValueMinus4),
IARG_MEMORYOP_EA, 0,
IARG_RETURN_REGS, scratchReg, IARG_END);
INS_RewriteMemoryOperand(ins, 0, scratchReg);
// pass the original memory address accessed by the app instruction (i.e. before the rewrite) to AddrValueB
INS_InsertCall(ins, IPOINT_BEFORE,
AFUNPTR(AddrValueB),
IARG_MEMORYOP_EA, 0, IARG_END);
instrumentationCount++;
return;
}
}
}
开发者ID:EmilyBragg，项目名称:profiling-tool，代码行数:31，代码来源:aoti_mutation_tool.cpp
示例15: Inst
// Pin calls this function every time a new instruction is encountered
VOID Inst(INS ins, VOID *v)
{
ADDRINT pc = INS_Address (ins);
if ( pc == StartAddr )
RecordFlag = true;
if ( pc == EndAddr )
RecordFlag = false;
if ( RecordFlag && pc < 0x01000000 )
{
if ( MinAddr > pc )
MinAddr = pc;
if ( MaxAddr < pc )
MaxAddr = pc;
INS_InsertCall( ins, IPOINT_BEFORE, (AFUNPTR)profile_code, IARG_INST_PTR, IARG_END );
if (INS_IsMemoryWrite(ins))
INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(profile_mem_write), IARG_INST_PTR, IARG_END);
if ( INS_HasMemoryRead2(ins) )
INS_InsertPredicatedCall(ins, IPOINT_BEFORE, AFUNPTR(profile_mem_read), IARG_INST_PTR, IARG_END);
if ( INS_IsMemoryRead(ins) )
INS_InsertPredicatedCall(ins, IPOINT_BEFORE, AFUNPTR(profile_mem_read), IARG_INST_PTR, IARG_END);
}
}
开发者ID:peterdocter，项目名称:Kaleidoscope，代码行数:29，代码来源:DataProfiler.cpp
示例16: traceInst
/**
* This function is called
**/
void traceInst(INS ins, VOID*)
{
ADDRINT address = INS_Address(ins);
if (isUnknownAddress(address))
{
// The address is an address that does not belong to any loaded module.
// This is potential shellcode. For these instructions a callback
// function is inserted that dumps information to the trace file when
// the instruction is actually executed.
INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(dump_shellcode),
IARG_PTR, new std::string(dumpInstruction(ins)), IARG_END
);
}
else
{
// The address is a legit address, meaning it is probably not part of
// any shellcode. In this case we just log the instruction to dump it
// later to show when control flow was transfered from legit code to
// shellcode.
legitInstructions.push_back(dumpInstruction(ins));
if (legitInstructions.size() > MAX_LEGIT_INSTRUCTION_LOG_SIZE)
{
// Log only up to MAX_LEGIT_INSTRUCTION_LOG_SIZE instructions or the whole
// program before the shellcode will be dumped.
legitInstructions.pop_front();
}
}
}
开发者ID:JaonLin，项目名称:pin-tools，代码行数:36，代码来源:shellcode.cpp
示例17: Trace
VOID Trace(TRACE trace, VOID *v)
{
BOOL rewrite = false;
for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
{
for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
{
// If we see an instruction that needs rewriting, then rewrite all
if (SwizzleRefs.find(INS_Address(ins)) != SwizzleRefs.end())
rewrite = true;
if (rewrite)
{
// If we suspect this instruction needs to be swizzled, generate safe, but slow code
RewriteIns(ins);
}
else
{
// Generate code to check if swizzling is needed, but not do it
CheckIns(ins, TRACE_Address(trace));
}
}
}
}
开发者ID:telnetgmike，项目名称:arm-v7a-pintool，代码行数:25，代码来源:swizzle3.C
示例18: Trace
VOID Trace (TRACE trace, VOID *v)
{
for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
{
for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
{
xed_iclass_enum_t iclass1 = static_cast<xed_iclass_enum_t>(INS_Opcode(ins));
if (iclass1 == XED_ICLASS_FLD1 && INS_Valid(INS_Next(ins)))
{
xed_iclass_enum_t iclass2 = static_cast<xed_iclass_enum_t>(INS_Opcode(INS_Next(ins)));
if (iclass2 == XED_ICLASS_FLD1 && INS_Valid(INS_Next(INS_Next(ins))))
{
xed_iclass_enum_t iclass3 = static_cast<xed_iclass_enum_t>(INS_Opcode(INS_Next(INS_Next(ins))));
if (iclass3 == XED_ICLASS_FLD1)
{
printf ("found fld1 sequence at %x\n", INS_Address(INS_Next(INS_Next(ins))));
{
INS_InsertCall(INS_Next(INS_Next(ins)), IPOINT_AFTER, AFUNPTR(CallToFldzToTop3), IARG_END);
printf ("Inserted call1 to FldzToTop3 after instruction at %x\n", INS_Address(INS_Next(INS_Next(ins))));
}
}
}
}
}
}
}
开发者ID:alagenchev，项目名称:school_code，代码行数:28，代码来源:x87_regs_in_context.cpp
示例19: Instruction
VOID Instruction(INS ins, VOID *v)
{
INS_InsertCall(
ins, IPOINT_BEFORE, (AFUNPTR)insCallBack,
IARG_ADDRINT, INS_Address(ins),
IARG_PTR, new string(INS_Disassemble(ins)),
IARG_END);
}
开发者ID:Debug-Orz，项目名称:stuffz，代码行数:8，代码来源:Simple-loop-detection-via-the-instruction-counter.cpp
示例20: Instruction_ilp_one_only
VOID Instruction_ilp_one_only(INS ins, VOID* v){
INS_InsertCall(ins, IPOINT_BEFORE, (AFUNPTR)all_instr_full_count_always,IARG_THREAD_ID, IARG_END);
ADDRINT insAddr = INS_Address(ins);
ins_buffer_entry* e = findInsBufferEntry(insAddr);
instrument_ilp_one(ins, e);
}
开发者ID:ucmsuri，项目名称:ilp，代码行数:8，代码来源:mica.cpp
注：本文中的INS_Address函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论