C++ IOHIDDeviceRegisterInputReportCallback函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中IOHIDDeviceRegisterInputReportCallback函数的典型用法代码示例。如果您正苦于以下问题：C++ IOHIDDeviceRegisterInputReportCallback函数的具体用法？C++ IOHIDDeviceRegisterInputReportCallback怎么用？C++ IOHIDDeviceRegisterInputReportCallback使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了IOHIDDeviceRegisterInputReportCallback函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: OVR_ASSERT

void HIDDevice::closeDevice(bool wasUnplugged)
{
    OVR_ASSERT(Device != NULL);
    
    if (!wasUnplugged)
    {
        // Clear the registered callbacks.
        IOHIDDeviceRegisterInputReportCallback(Device,
                                               ReadBuffer,
                                               InputReportBufferLength,
                                               NULL,
                                               this);
        
        IOHIDDeviceRegisterRemovalCallback(Device, NULL, this);
        
        IOHIDDeviceUnscheduleFromRunLoop(Device,
                                         HIDManager->getRunLoop(),
                                         kCFRunLoopDefaultMode);
        IOHIDDeviceClose(Device, kIOHIDOptionsTypeNone);
    }
    
	CFRelease(Device);
    Device = NULL;
        
    LogText("OVR::OSX::HIDDevice - HID Device Closed '%s'\n", DevDesc.Path.ToCStr());
}

开发者ID:123woodman，项目名称:minko，代码行数:26，代码来源:OVR_OSX_HIDDevice.cpp

示例2: iohidmanager_hid_device_add

static void iohidmanager_hid_device_add(void *data, IOReturn result,
      void* sender, IOHIDDeviceRef device)
{
   IOReturn ret;
   uint16_t dev_vid, dev_pid;

   settings_t *settings = config_get_ptr();
   iohidmanager_hid_t     *hid = (iohidmanager_hid_t*)hid_driver_get_data();
   struct iohidmanager_hid_adapter *adapter = (struct iohidmanager_hid_adapter*)
      calloc(1, sizeof(*adapter));

   if (!adapter || !hid)
      return;

   adapter->handle        = device;

   ret = IOHIDDeviceOpen(device, kIOHIDOptionsTypeNone);

   if (ret != kIOReturnSuccess)
   {
      free(adapter);
      return;
   }

   /* Move the device's run loop to this thread. */
   IOHIDDeviceScheduleWithRunLoop(device, CFRunLoopGetCurrent(),
         kCFRunLoopCommonModes);
   IOHIDDeviceRegisterRemovalCallback(device, iohidmanager_hid_device_remove, adapter);

#ifndef IOS
   iohidmanager_hid_device_get_product_string(device, adapter->name,
         sizeof(adapter->name));
#endif

   dev_vid = iohidmanager_hid_device_get_vendor_id  (device);
   dev_pid = iohidmanager_hid_device_get_product_id (device);

   adapter->slot = pad_connection_pad_init(hid->slots,
         adapter->name, dev_vid, dev_pid, adapter, &iohidmanager_hid_device_send_control);

   if (adapter->slot == -1)
       return;

   if (pad_connection_has_interface(hid->slots, adapter->slot))
      IOHIDDeviceRegisterInputReportCallback(device,
            adapter->data + 1, sizeof(adapter->data) - 1,
            iohidmanager_hid_device_report, adapter);
   else
      IOHIDDeviceRegisterInputValueCallback(device,
            iohidmanager_hid_device_input_callback, adapter);

   if (adapter->name[0] == '\0')
      return;

   strlcpy(settings->input.device_names[adapter->slot],
         adapter->name, sizeof(settings->input.device_names[adapter->slot]));

   iohidmanager_hid_device_add_autodetect(adapter->slot,
         adapter->name, iohidmanager_hid.ident, dev_vid, dev_pid);
}

开发者ID:Ced2911，项目名称:RetroArch，代码行数:60，代码来源:iohidmanager_hid.c

示例3: fillDescriptorInfo

  void osxPointingDeviceManager::AddDevice(void *sender, IOReturn, void *, IOHIDDeviceRef devRef)
  {
    // Prevent other HID devices from being detected
    if (isNotPointingDevice(devRef))
      return;
    osxPointingDeviceManager *self = (osxPointingDeviceManager *)sender;
    osxPointingDeviceData *pdd = new osxPointingDeviceData;
    fillDescriptorInfo(devRef, pdd->desc);
    pdd->devRef = devRef;
    self->registerDevice(devRef, pdd);

    CFDataRef descriptor = (CFDataRef)IOHIDDeviceGetProperty(devRef, CFSTR(kIOHIDReportDescriptorKey));
    if (descriptor) {
      const UInt8 *bytes = CFDataGetBytePtr(descriptor);
      CFIndex length = CFDataGetLength(descriptor);
      if (!pdd->parser.setDescriptor(bytes, length))
      {
        if (self->debugLevel > 1)
          std::cerr << "    osxPointingDeviceManager::AddDevice: unable to parse the HID report descriptor" << std::endl;
      }
      else
        IOHIDDeviceRegisterInputReportCallback(devRef, pdd->report, sizeof(pdd->report),
                                               hidReportCallback, self);

      if (self->debugLevel > 1)
      {
        std::cerr << "HID descriptors: [ " << std::flush ;
        for (int i=0; i<length; ++i)
          std::cerr << std::hex << std::setfill('0') << std::setw(2) << (int)bytes[i] << " " ;
        std::cerr << "]" << std::endl ;
      }
    }
  }

开发者ID:hemantsurale，项目名称:libpointing，代码行数:33，代码来源:osxPointingDeviceManager.cpp

示例4: yyyPacketShutdown

void yyyPacketShutdown(yInterfaceSt  *iface)
{
    int i;

    // remove iface from setuped ifaces
    for (i=0; i< SETUPED_IFACE_CACHE_SIZE ; i++) {
        if(yContext->setupedIfaceCache[i]==iface){
            yContext->setupedIfaceCache[i] = NULL;
            break;
        }
    }
    YASSERT(i<SETUPED_IFACE_CACHE_SIZE);
    if(iface->devref!=NULL){
        IOHIDDeviceRegisterInputReportCallback(iface->devref,              // IOHIDDeviceRef for the HID device
                                               (u8*) &iface->tmprxpkt,   // pointer to the report data (uint8_t's)
                                               USB_PKT_SIZE,              // number of bytes in the report (CFIndex)
                                               NULL,   // the callback routine
                                               iface);                      // context passed to callback
        IOHIDDeviceClose(iface->devref, kIOHIDOptionsTypeNone);
        iface->devref=NULL;
    }
    yPktQueueFree(&iface->rxQueue);
	yPktQueueFree(&iface->txQueue);
    iface->flags.yyySetupDone = 0;
    CFRelease(iface->run_loop_mode);
    if (yContext->osx_flags & YCTX_OSX_MULTIPLES_HID) {
        stopHIDManager(&iface->hid);
    }
}

开发者ID:LudovicRousseau，项目名称:yoctolib_cpp，代码行数:29，代码来源:ypkt_osx.c

示例5: attach_callback

static void attach_callback(void *context, IOReturn r, void *hid_mgr, IOHIDDeviceRef dev)
{
   struct hid_struct *h;
   
	//fprintf(stderr,"attach callback\n");
   //
	if (IOHIDDeviceOpen(dev, kIOHIDOptionsTypeNone) != kIOReturnSuccess) return;
	h = (hid_t *)malloc(sizeof(hid_t));
	if (!h) return;
   
	memset(h, 0, sizeof(hid_t));
   
	IOHIDDeviceScheduleWithRunLoop(dev, CFRunLoopGetCurrent(), kCFRunLoopDefaultMode);	
   IOHIDDeviceRegisterInputReportCallback(dev, h->buffer, sizeof(h->buffer),
                                          input_callback, h);
   h->ref = dev;
	h->open = 1;
   
	add_hid(h);
   usbstatus=1; 
   
   /*
   r = rawhid_open(1, 0x16C0, 0x0480, 0xFFAB, 0x0200);
   if (r <= 0) 
   {
      fprintf(stderr,"no rawhid device found\n");
   }
   else
   {
      
      fprintf(stderr,"new rawhid device found\n");
   }
   */

}

开发者ID:ruediheimlicher，项目名称:RC_Interface，代码行数:35，代码来源:hid.c

示例6: yyySetup

int yyySetup(yInterfaceSt *iface,char *errmsg)
{  
    char str[32];

    yyyInitPktQueue(iface);
    yInitializeCriticalSection(&iface->yyyCS);

    if(iface->devref==NULL){
        return YERR(YAPI_DEVICE_NOT_FOUND);
    }
    IOReturn ret = IOHIDDeviceOpen(iface->devref, kIOHIDOptionsTypeNone);
    if (ret != kIOReturnSuccess) {
        YSPRINTF(str,32,"Unable to open device (0x%x)",ret);
        return YERRMSG(YAPI_IO_ERROR,str);
    }
    
    /* Create the Run Loop Mode for this device. printing the reference seems to work. */
    sprintf(str, "yocto_%p", iface->devref);
    iface->run_loop_mode = CFStringCreateWithCString(NULL, str, kCFStringEncodingASCII);

    /* Attach the device to a Run Loop */
    IOHIDDeviceScheduleWithRunLoop(iface->devref, yContext->usb_run_loop, iface->run_loop_mode);
    IOHIDDeviceRegisterInputReportCallback( iface->devref,              // IOHIDDeviceRef for the HID device
                                            (u8*) &iface->tmprxpkt,     // pointer to the report data 
                                            USB_PKT_SIZE,               // number of bytes in the report (CFIndex)
                                            &Handle_IOHIDDeviceIOHIDReportCallback,   // the callback routine
                                            iface);                     // context passed to callback
    return 0;
}

开发者ID:octet8，项目名称:yoctolib_cpp，代码行数:29，代码来源:ypkt_osx.c

示例7: hid_manager_device_attached

static void hid_manager_device_attached(void* context, IOReturn result, void* sender, IOHIDDeviceRef device)
{
    char device_name[1024];
    CFStringRef device_name_ref;
    struct apple_pad_connection* connection = (struct apple_pad_connection*)calloc(1, sizeof(*connection));
    
    connection->device = device;
    connection->slot = MAX_PLAYERS;
    
    IOHIDDeviceOpen(device, kIOHIDOptionsTypeNone);
    IOHIDDeviceScheduleWithRunLoop(device, CFRunLoopGetCurrent(), kCFRunLoopCommonModes);
    IOHIDDeviceRegisterRemovalCallback(device, hid_device_removed, connection);
    
    device_name_ref = IOHIDDeviceGetProperty(device, CFSTR(kIOHIDProductKey));
    CFStringGetCString(device_name_ref, device_name, sizeof(device_name), kCFStringEncodingUTF8);
    
    connection->slot = apple_joypad_connect(device_name, connection);
    
    if (apple_joypad_has_interface(connection->slot))
        IOHIDDeviceRegisterInputReportCallback(device, connection->data + 1, sizeof(connection->data) - 1, hid_device_report, connection);
    else
        IOHIDDeviceRegisterInputValueCallback(device, hid_device_input_callback, connection);

    if (device_name[0] != '\0')
    {
       strlcpy(g_settings.input.device_names[connection->slot], device_name, sizeof(g_settings.input.device_names));
       input_config_autoconfigure_joypad(connection->slot, device_name, apple_joypad.ident);
       RARCH_LOG("Port %d: %s.\n", connection->slot, device_name);
    }
}

开发者ID:DerrrekWang，项目名称:RetroArch，代码行数:30，代码来源:apple_joypad.c

示例8: openusb

void openusb(usbdevice* kb){
    // The driver sometimes isn't completely ready yet, so give it a short delay
    sleep(1);

    // Handle 3 is the control handle
    kb->lastkeypress = -1;
    kb->handle = kb->handles[3];

    // Set up the device
    int setup = setupusb(kb);
    if(setup == -1){
        closehandle(kb);
        pthread_mutex_unlock(&kb->mutex);
        pthread_mutex_destroy(&kb->mutex);
        pthread_mutex_destroy(&kb->keymutex);
        return;
    } else if(setup){
        // If the setup had a communication error, wait a bit and try again.
        sleep(1);
        resetusb(kb);
    }

    // Start handling HID reports for the Corsair input
    IOHIDDeviceRegisterInputReportCallback(kb->handles[2], kb->intinput, MSG_SIZE, reportcallback, kb);

    // Register for close notification
    IOHIDDeviceRegisterRemovalCallback(kb->handle, usbremove, kb);

    // Update connected
    updateconnected();
    notifyconnect(kb, 1);
    int index = INDEX_OF(kb, keyboard);
    printf("Device ready at %s%d\n", devpath, index);
    pthread_mutex_unlock(&kb->mutex);
}

开发者ID:julianliaw，项目名称:ckb，代码行数:35，代码来源:usb_mac.c

示例9: TeensyControls_usb_close

void TeensyControls_usb_close(void)
{
	teensy_t *t;
	int wait=0;

	for (t = TeensyControls_first_teensy; t; t = t->next) {
		if (t->online) {
			printf("close USB device\n");
			IOHIDDeviceRegisterInputReportCallback(t->usb.dev,
				t->usb.inbuf, 64, NULL, NULL);
			// TODO: how to terminate input thread?
			// TODO: how to terminate output thread?
			pthread_cond_signal(&t->output_event);
			IOHIDDeviceClose(t->usb.dev, 0);
			t->online = 0;
		}
	}
	if (hmgr) {
		printf("closing hid manager\n");
		IOHIDManagerRegisterDeviceMatchingCallback(hmgr, NULL, NULL);
		IOHIDManagerRegisterDeviceRemovalCallback(hmgr, NULL, NULL);
		IOHIDManagerClose(hmgr, 0);
		hmgr = NULL;
	}
	while (++wait < 20 && num_thread_alive() > 0) {
		usleep(10000);
		printf("wait #%d for thread exit\n", wait);
	}
}

开发者ID:orthopteroid，项目名称:X-Plane_Plugin，代码行数:29，代码来源:usb.c

示例10: match_callback

static void match_callback(void *context, IOReturn result,
                           void *sender, IOHIDDeviceRef device)
{
	static int captured_devices = 0;
	static int failed_captures = 0;

	// dump instead of capturing
	if (false)
	{
		{
			CFTypeRef o = IOHIDDeviceGetProperty(
				device, CFSTR(kIOHIDDeviceUsagePairsKey));
			printf("\tkIOHIDDeviceUsagePairsKey = %p\n", o);
			CFShow(o);
		}

		{
			CFTypeRef o = IOHIDDeviceGetProperty(
				device, CFSTR(kIOHIDElementKey));
			printf("\tkIOHIDElementKey = %p\n", o);
			CFShow(o);
		}

		return;
	}

	IOReturn r = IOHIDDeviceOpen(device, kIOHIDOptionsTypeSeizeDevice);
	if (r == kIOReturnSuccess) {
		struct keyboard_handler *handler =
			(struct keyboard_handler*) malloc(sizeof(*handler));
		memset(handler, 0x00, sizeof(*handler));
		handler->index = captured_devices++;
		IOHIDDeviceRegisterInputReportCallback(
			device,
			handler->hid_report_buffer,
			sizeof(handler->hid_report_buffer),
			&got_hid_report,
			(void*) handler);

		move(handler->index + 1, 0);
		printw("%i <no reports yet>", handler->index);

	}
	else {
		failed_captures++;
	}

	move(0, 0);
	clrtoeol();
	printw("Seized %i devices", captured_devices);
	if (failed_captures) {
		printw(" (%i failed)", failed_captures);
	}
	refresh();
}

开发者ID:GodJobs，项目名称:iousbhiddriver-descriptor-override，代码行数:55，代码来源:hid_report_dumper.c

示例11: openusb

void openusb(usbdevice* kb, short vendor, short product){
    kb->lastkeypress = KEY_NONE;
    if(IS_RGB(vendor, product))
        // Handle 3 is the control handle
        kb->handle = kb->handles[3];
    else
        // Non RGB keyboards don't have one, so just use 0
        kb->handle = kb->handles[0];

    // Set up the device
    int setup = setupusb(kb, vendor, product);
    if(setup == -1 || (setup && usb_tryreset(kb))){
        closehandle(kb);
        pthread_mutex_unlock(&kb->mutex);
        pthread_mutex_destroy(&kb->mutex);
        pthread_mutex_destroy(&kb->keymutex);
        return;
    }

    // Start handling HID reports for the input
    IOHIDDeviceRegisterInputReportCallback(kb->handles[0], kb->urbinput, 8, reportcallback, kb);
    if(IS_RGB(vendor, product))
        IOHIDDeviceRegisterInputReportCallback(kb->handles[1], kb->urbinput + 8, 21, reportcallback, kb);
    else
        IOHIDDeviceRegisterInputReportCallback(kb->handles[1], kb->urbinput + 8, 4, reportcallback, kb);
    if(IS_RGB(vendor, product))
        IOHIDDeviceRegisterInputReportCallback(kb->handles[2], kb->kbinput, MSG_SIZE, reportcallback, kb);
    else
        IOHIDDeviceRegisterInputReportCallback(kb->handles[2], kb->urbinput + 8 + 4, 15, reportcallback, kb);

    // Register for close notification
    IOHIDDeviceRegisterRemovalCallback(kb->handle, usbremove, kb);

    // Update connected
    updateconnected();
    notifyconnect(kb, 1);
    int index = INDEX_OF(kb, keyboard);
    printf("Device ready at %s%d\n", devpath, index);
    pthread_mutex_unlock(&kb->mutex);
}

开发者ID:jsnel，项目名称:ckb，代码行数:40，代码来源:usb_mac.c

示例12: add_device

static void add_device(void* context, IOReturn result,
      void* sender, IOHIDDeviceRef device)
{
   char device_name[PATH_MAX_LENGTH];
   CFStringRef device_name_ref;
   CFNumberRef vendorID, productID;
   struct pad_connection* connection = (struct pad_connection*)
      calloc(1, sizeof(*connection));

   connection->device_handle = device;
   connection->slot          = MAX_USERS;

   IOHIDDeviceOpen(device, kIOHIDOptionsTypeNone);

   /* Move the device's run loop to this thread. */
   IOHIDDeviceScheduleWithRunLoop(device, CFRunLoopGetCurrent(),
         kCFRunLoopCommonModes);
   IOHIDDeviceRegisterRemovalCallback(device, remove_device, connection);

#ifndef IOS
   device_name_ref = IOHIDDeviceGetProperty(device, CFSTR(kIOHIDProductKey));
   CFStringGetCString(device_name_ref, device_name,
         sizeof(device_name), kCFStringEncodingUTF8);
#endif

   vendorID = (CFNumberRef)IOHIDDeviceGetProperty(device, CFSTR(kIOHIDVendorIDKey));
   CFNumberGetValue(vendorID, kCFNumberIntType, &connection->v_id);

   productID = (CFNumberRef)IOHIDDeviceGetProperty(device, CFSTR(kIOHIDProductIDKey));
   CFNumberGetValue(productID, kCFNumberIntType, &connection->p_id);

   connection->slot = pad_connection_pad_init(slots, device_name,
         connection, &hid_pad_connection_send_control);

   if (pad_connection_has_interface(slots, connection->slot))
      IOHIDDeviceRegisterInputReportCallback(device,
            connection->data + 1, sizeof(connection->data) - 1,
            hid_device_report, connection);
   else
      IOHIDDeviceRegisterInputValueCallback(device,
            hid_device_input_callback, connection);

   if (device_name[0] == '\0')
      return;

   strlcpy(g_settings.input.device_names[connection->slot],
         device_name, sizeof(g_settings.input.device_names));

   input_config_autoconfigure_joypad(connection->slot,
         device_name, connection->v_id, connection->p_id, apple_hid_joypad.ident);
   RARCH_LOG("Port %d: %s.\n", connection->slot, device_name);
}

开发者ID:maddox，项目名称:RetroArch，代码行数:52，代码来源:apple_joypad_hid.c

示例13: input_thread

static void input_thread(void *arg)
{
	teensy_t *t = (teensy_t *)arg;
	printf("input_thread begin\n");
	IOHIDDeviceRegisterInputReportCallback(t->usb.dev,
		t->usb.inbuf, 64, input_callback, t);
	while (1) {
		int r;
		if (t->online == 0) break;
		r = CFRunLoopRunInMode(kCFRunLoopDefaultMode, 1, true);
	}
	t->input_thread_quit = 1;
	printf("input_thread end\n");
}

开发者ID:orthopteroid，项目名称:X-Plane_Plugin，代码行数:14，代码来源:usb.c

示例14: IOHIDManagerRegisterDeviceMatchingCallback

/**
 * @brief Called by the USB system
 * @param dev The device that was attached
 */
void pjrc_rawhid::attach(IOHIDDeviceRef d)
{
    // Store the device handle
    dev = d;

    if (IOHIDDeviceOpen(dev, kIOHIDOptionsTypeNone) != kIOReturnSuccess) return;
    // Disconnect the attach callback since we don't want to automatically reconnect
    IOHIDManagerRegisterDeviceMatchingCallback(hid_manager, NULL, NULL);
    IOHIDDeviceScheduleWithRunLoop(dev, the_correct_runloop, kCFRunLoopDefaultMode);
    IOHIDDeviceRegisterInputReportCallback(dev, buffer, sizeof(buffer), pjrc_rawhid::input_callback, this);

    attach_count++;
    device_open = true;
    unplugged = false;
}

开发者ID:BangBo，项目名称:OpenPilot，代码行数:19，代码来源:pjrc_rawhid_mac.cpp

示例15: attach_callback

static void attach_callback(void *context, IOReturn r, void *hid_mgr, IOHIDDeviceRef dev)
{
    struct hid_struct *h;

    printf("attach callback\n");
    if (IOHIDDeviceOpen(dev, kIOHIDOptionsTypeNone) != kIOReturnSuccess) return;
    h = (hid_t *)malloc(sizeof(hid_t));
    if (!h) return;
    memset(h, 0, sizeof(hid_t));
    IOHIDDeviceScheduleWithRunLoop(dev, CFRunLoopGetCurrent(), kCFRunLoopDefaultMode);
    IOHIDDeviceRegisterInputReportCallback(dev, h->buffer, sizeof(h->buffer), input_callback, h);
    h->ref = dev;
    h->open = 1;
    add_hid(h);
}

开发者ID:samguns，项目名称:OpenPilot，代码行数:15，代码来源:pjrc_rawhid_mac.cpp

示例16: DeviceAttached

    static void DeviceAttached(void* context, IOReturn result, void* sender, IOHIDDeviceRef device)
    {
       Connection* connection = new Connection();
       connection->device = device;

       IOHIDDeviceOpen(device, kIOHIDOptionsTypeNone);
       IOHIDDeviceScheduleWithRunLoop(device, CFRunLoopGetCurrent(), kCFRunLoopCommonModes);
       IOHIDDeviceRegisterRemovalCallback(device, DeviceRemoved, connection);

       CFStringRef device_name_ref = (CFStringRef)IOHIDDeviceGetProperty(device, CFSTR(kIOHIDProductKey));
       char device_name[1024];
       CFStringGetCString(device_name_ref, device_name, sizeof(device_name), kCFStringEncodingUTF8);

       connection->hidpad = HIDPad::Connect(device_name, connection);
       IOHIDDeviceRegisterInputReportCallback(device, connection->data + 1, sizeof(connection->data) - 1, DeviceReport, connection);
    }

开发者ID:RandomName001，项目名称:MFiWrapper，代码行数:16，代码来源:HIDManager_OSX.cpp

示例17: hid_close

void HID_API_EXPORT hid_close(hid_device *dev)
{
	if ( !dev )
	{
		return;
	}

	/* Disconnect the report callback before close. */
	if (!dev->disconnected) {
		IOHIDDeviceRegisterInputReportCallback(
			dev->device_handle, dev->input_report_buf, dev->max_input_report_len,
			NULL, dev);
		IOHIDManagerRegisterDeviceRemovalCallback(hid_mgr, NULL, dev);
		IOHIDDeviceUnscheduleFromRunLoop(dev->device_handle, dev->run_loop, dev->run_loop_mode);
		IOHIDDeviceScheduleWithRunLoop(dev->device_handle, CFRunLoopGetMain(), kCFRunLoopDefaultMode);
	}
	
	/* Cause read_thread() to stop. */
	dev->shutdown_thread = 1;
	
	/* Wake up the run thread's event loop so that the thread can exit. */
	CFRunLoopSourceSignal(dev->source);
	CFRunLoopWakeUp(dev->run_loop);
	
	/* Notify the read thread that it can shut down now. */
	pthread_barrier_wait(&dev->shutdown_barrier);

	/* Wait for read_thread() to end. */
	pthread_join(dev->thread, NULL);

	/* Close the OS handle to the device, but only if it's not
	   been unplugged. If it's been unplugged, then calling
	   IOHIDDeviceClose() will crash. */
	if (!dev->disconnected) {
		IOHIDDeviceClose(dev->device_handle, kIOHIDOptionsTypeNone);
	}
	
	/* Clear out the queue of received reports. */
	pthread_mutex_lock(&dev->mutex);
	while (dev->input_reports) {
		return_data(dev, NULL, 0);
	}
	pthread_mutex_unlock(&dev->mutex);

	free_hid_device(dev);
}

开发者ID:jingoro2112，项目名称:dna，代码行数:46，代码来源:hid.c

示例18: yyyPacketShutdown

void yyyPacketShutdown(yInterfaceSt  *iface)
{
    
    yEnterCriticalSection(&iface->yyyCS);
    if(iface->devref!=NULL){
        IOHIDDeviceRegisterInputReportCallback( iface->devref,              // IOHIDDeviceRef for the HID device
                                            (u8*) &iface->tmprxpkt,   // pointer to the report data (uint8_t's)
                                            USB_PKT_SIZE,              // number of bytes in the report (CFIndex)
                                            NULL,   // the callback routine
                                            iface);                      // context passed to callback
        IOHIDDeviceClose(iface->devref, kIOHIDOptionsTypeNone);
        iface->devref=NULL;
    }
    yLeaveCriticalSection(&iface->yyyCS);
    yDeleteCriticalSection(&iface->yyyCS);
    yyyFreePktQueue(iface);

}

开发者ID:octet8，项目名称:yoctolib_cpp，代码行数:18，代码来源:ypkt_osx.c

示例19: hid_manager_device_attached

static void hid_manager_device_attached(void* context, IOReturn result, void* sender, IOHIDDeviceRef device)
{
   struct apple_pad_connection* connection = calloc(1, sizeof(struct apple_pad_connection));
   connection->device = device;
   connection->slot = MAX_PLAYERS;

   IOHIDDeviceOpen(device, kIOHIDOptionsTypeNone);
   IOHIDDeviceScheduleWithRunLoop(device, CFRunLoopGetCurrent(), kCFRunLoopCommonModes);
   IOHIDDeviceRegisterRemovalCallback(device, hid_device_removed, connection);

   CFStringRef device_name_ref = IOHIDDeviceGetProperty(device, CFSTR(kIOHIDProductKey));
   char device_name[1024];
   CFStringGetCString(device_name_ref, device_name, sizeof(device_name), kCFStringEncodingUTF8);

   connection->slot = apple_joypad_connect(device_name, connection);
      
   if (apple_joypad_has_interface(connection->slot))
      IOHIDDeviceRegisterInputReportCallback(device, connection->data + 1, sizeof(connection->data) - 1, hid_device_report, connection);
   else
      IOHIDDeviceRegisterInputValueCallback(device, hid_device_input_callback, connection);
}

开发者ID:Lodovik，项目名称:RetroArch，代码行数:21，代码来源:hid_pad.c

示例20: lock

//! Close the HID device
void pjrc_rawhid::close(int)
{
    // Make sure any pending locks are done
    QMutexLocker lock(m_writeMutex);

    if (device_open) {
        device_open = false;
        CFRunLoopStop(the_correct_runloop);

        if (!unplugged) {
            IOHIDDeviceUnscheduleFromRunLoop(dev, the_correct_runloop, kCFRunLoopDefaultMode);
            IOHIDDeviceRegisterInputReportCallback(dev, buffer, sizeof(buffer), NULL, NULL);
            IOHIDDeviceClose(dev, kIOHIDOptionsTypeNone);
        }

        IOHIDManagerRegisterDeviceRemovalCallback(hid_manager, NULL, NULL);
        IOHIDManagerClose(hid_manager, 0);

        dev = NULL;
        hid_manager = NULL;
    }
}

开发者ID:BangBo，项目名称:OpenPilot，代码行数:23，代码来源:pjrc_rawhid_mac.cpp

注：本文中的IOHIDDeviceRegisterInputReportCallback函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ IOHIDDeviceScheduleWithRunLoop函数代码示例发布时间：2022-05-30

C++ IOHIDDeviceGetProperty函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18257|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9673|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8175|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8547|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8456|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9387|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8427|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7862|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8411|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ IOHIDDeviceRegisterInputReportCallback函数代码示例

示例1: OVR_ASSERT

示例2: iohidmanager_hid_device_add

示例3: fillDescriptorInfo

示例4: yyyPacketShutdown

示例5: attach_callback

示例6: yyySetup

示例7: hid_manager_device_attached

示例8: openusb

示例9: TeensyControls_usb_close

示例10: match_callback

示例11: openusb

示例12: add_device

示例13: input_thread

示例14: IOHIDManagerRegisterDeviceMatchingCallback

示例15: attach_callback

示例16: DeviceAttached

示例17: hid_close

示例18: yyyPacketShutdown

示例19: hid_manager_device_attached

示例20: lock

请发表评论

全部评论

上一篇：

下一篇：

dustinvtran/ml-videos: A collection of v

ravikumar001/maven

更的笔顺,体会更的笔画,理会更的部首

ceejbot/LOUDBOT: AUTOMATED SHOUTING FOR

CVE-2022-29834

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053