C++ ISK函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中ISK函数的典型用法代码示例。如果您正苦于以下问题：C++ ISK函数的具体用法？C++ ISK怎么用？C++ ISK使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了ISK函数的19个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: do_getinstruction

static int do_getinstruction(lua_State *L)	/** getinstruction(f,i) */
{
 const Proto* f=Pget(L,1);
 int pc=luaL_checkinteger(L,2);
 if (pc<=0 || pc>f->sizecode || f->code==NULL) return 0;
 pc--;
 {
 const Instruction* code=f->code;
 Instruction i=code[pc];
 OpCode o=GET_OPCODE(i);
 int a=GETARG_A(i);
 int b=GETARG_B(i);
 int c=GETARG_C(i);
 int ax=GETARG_Ax(i);
 int bx=GETARG_Bx(i);
 int sbx=GETARG_sBx(i);
 int line=getfuncline(f,pc);
 if (line>0) lua_pushinteger(L,line); else lua_pushnil(L);
 lua_pushstring(L,luaP_opnames[o]);
 switch (getOpMode(o))
 {
  case iABC:
   lua_pushinteger(L,a);
   if (getBMode(o)!=OpArgN) lua_pushinteger(L,ISK(b) ? (MYK(INDEXK(b))) : b);
   else lua_pushnil(L);
   if (getCMode(o)!=OpArgN) lua_pushinteger(L,ISK(c) ? (MYK(INDEXK(c))) : c);
   else lua_pushnil(L);
   break;
  case iABx:
   lua_pushinteger(L,a);
   if (getBMode(o)==OpArgK) lua_pushinteger(L,MYK(bx)); else lua_pushinteger(L,bx);
   lua_pushnil(L);
   break;
  case iAsBx:
   lua_pushinteger(L,a);
   lua_pushinteger(L,sbx);
   lua_pushnil(L);
   break;
  case iAx:
   lua_pushinteger(L,MYK(ax));
   lua_pushnil(L);
   lua_pushnil(L);
   break;
 }
 switch (o)
 {
   case OP_JMP:
   case OP_FORLOOP:
   case OP_FORPREP:
   case OP_TFORLOOP:
    lua_pop(L,1);
    lua_pushinteger(L,sbx+pc+2);
    break;
   default:
    break;
 }
 }
 return 5;
}

开发者ID:siffiejoe，项目名称:lua-lbci，代码行数:59，代码来源:lbci-5.2.c

示例2: ju_bytecode

/* local op, a, b, c, test = jit.util.bytecode(func, pc) */
static int ju_bytecode(lua_State *L)
{
    Proto *pt = check_LCL(L)->l.p;
    int pc = luaL_checkint(L, 2);
    if (pc >= 1 && pc <= pt->sizecode) {
        Instruction ins = pt->code[pc-1];
        OpCode op = GET_OPCODE(ins);
        if (pc > 1 && (((int)OP_SETLIST) << POS_OP) ==
                (pt->code[pc-2] & (MASK1(SIZE_OP,POS_OP) | MASK1(SIZE_C,POS_C)))) {
            lua_pushstring(L, luaP_opnames[OP_SETLIST]);
            lua_pushnumber(L, (lua_Number)ins);  /* Fake extended op. */
            return 1;
        }
        if (op >= NUM_OPCODES) return 0;  /* Just in case. */
        lua_pushstring(L, luaP_opnames[op]);
        lua_pushinteger(L, GETARG_A(ins));
        switch (getOpMode(op)) {
        case iABC: {
            int b = GETARG_B(ins), c = GETARG_C(ins);
            switch (getBMode(op)) {
            case OpArgN:
                lua_pushnil(L);
                break;
            case OpArgK:
                if (ISK(b)) b = -1-INDEXK(b);
            case OpArgR:
            case OpArgU:
                lua_pushinteger(L, b);
                break;
            }
            switch (getCMode(op)) {
            case OpArgN:
                lua_pushnil(L);
                break;
            case OpArgK:
                if (ISK(c)) c = -1-INDEXK(c);
            case OpArgR:
            case OpArgU:
                lua_pushinteger(L, c);
                break;
            }
            lua_pushboolean(L, testTMode(op));
            return 5;
        }
        case iABx: {
            int bx = GETARG_Bx(ins);
            lua_pushinteger(L, getBMode(op) == OpArgK ? -1-bx : bx);
            return 3;
        }
        case iAsBx:
            lua_pushinteger(L, GETARG_sBx(ins));
            return 3;
        }
    }
    return 0;
}

开发者ID:vasilenkomike，项目名称:xray，代码行数:57，代码来源:ljitlib.c

示例3: freereg

static void freereg(FuncState *fs, int reg)
{
	if (!ISK(reg) && reg >= fs->nactvar) {
		fs->freereg--;
		ktap_assert(reg == fs->freereg);
	}
}

开发者ID:WeiY，项目名称:ktap，代码行数:7，代码来源:code.c

示例4: kp_optimize_code

/*
 * This function must be called before all code loaded.
 */
void kp_optimize_code(ktap_state *ks, int level, ktap_proto *f)
{
	int i;

	for (i = 0; i < f->sizecode; i++) {
		int instr = f->code[i];
		ktap_value *k = f->k;

		if (GET_OPCODE(instr) == OP_GETTABUP) {
			if ((GETARG_B(instr) == 0) && ISK(GETARG_C(instr))) {
				ktap_value *field = k + INDEXK(GETARG_C(instr));
				if (ttype(field) == KTAP_TSTRING) {
					int index = cfunction_cache_getindex(ks,
									field);
					if (index == -1)
						break;

					SET_OPCODE(instr, OP_LOAD_GLOBAL);
					SETARG_C(instr, index);
					f->code[i] = instr;
					break;
				}
			}
		}
	}

	/* continue optimize sub functions */
	for (i = 0; i < f->sizep; i++)
		kp_optimize_code(ks, level + 1, f->p[i]);
}

开发者ID:joelagnel，项目名称:ktap，代码行数:33，代码来源:vm.c

示例5: kname

static const char* kname(Proto* p, int c)
{
	if (ISK(c) && ttisstring(&p->k[INDEXK(c)]))
		return svalue(&p->k[INDEXK(c)]);
	else
		return "?";
}

开发者ID:migerh，项目名称:DCPUToolchain，代码行数:7，代码来源:ldebug.c

示例6: isshortstr

/**
 * Is the operand a reference to a short string constant?
 */
static int isshortstr(FuncState *fs, int kk) {
  if (ISK(kk)) {
    Proto *f = fs->f;
    kk = INDEXK(kk);
    lua_assert(kk >= 0 && kk < f->sizek);
    return ttisshrstring(&f->k[kk]);
  }
  return 0;
}

开发者ID:jadr2ddude，项目名称:ravi，代码行数:12，代码来源:lcode.c

示例7: luaV_finishOp

/*
** finish execution of an opcode interrupted by an yield
*/
void luaV_finishOp (lua_State *L) {
  CallInfo *ci = L->ci;
  StkId base = ci->u.l.base;
  Instruction inst = *(ci->u.l.savedpc - 1);  /* interrupted instruction */
  OpCode op = GET_OPCODE(inst);
  switch (op) {  /* finish its execution */
    case OP_ADD: case OP_SUB: case OP_MUL: case OP_DIV:
    case OP_MOD: case OP_POW: case OP_UNM: case OP_LEN:
    case OP_GETTABUP: case OP_GETTABLE: case OP_SELF: {
      setobjs2s(L, base + GETARG_A(inst), --L->top);
      break;
    }
    case OP_LE: case OP_LT: case OP_EQ: {
      int res = !l_isfalse(L->top - 1);
      L->top--;
      /* metamethod should not be called when operand is K */
      lua_assert(!ISK(GETARG_B(inst)));
      if (op == OP_LE &&  /* "<=" using "<" instead? */
          ttisnil(luaT_gettmbyobj(L, base + GETARG_B(inst), TM_LE)))
        res = !res;  /* invert result */
      lua_assert(GET_OPCODE(*ci->u.l.savedpc) == OP_JMP);
      if (res != GETARG_A(inst))  /* condition failed? */
        ci->u.l.savedpc++;  /* skip jump instruction */
      break;
    }
    case OP_CONCAT: {
      StkId top = L->top - 1;  /* top when 'call_binTM' was called */
      int b = GETARG_B(inst);      /* first element to concatenate */
      int total = cast_int(top - 1 - (base + b));  /* yet to concatenate */
      setobj2s(L, top - 2, top);  /* put TM result in proper position */
      if (total > 1) {  /* are there elements to concat? */
        L->top = top - 1;  /* top is one after last element (at top-2) */
        luaV_concat(L, total);  /* concat them (may yield again) */
      }
      /* move final result to final position */
      setobj2s(L, ci->u.l.base + GETARG_A(inst), L->top - 1);
      L->top = ci->top;  /* restore top */
      break;
    }
    case OP_TFORCALL: {
      lua_assert(GET_OPCODE(*ci->u.l.savedpc) == OP_TFORLOOP);
      L->top = ci->top;  /* correct top */
      break;
    }
    case OP_CALL: {
      if (GETARG_C(inst) - 1 >= 0)  /* nresults >= 0? */
        L->top = ci->top;  /* adjust results */
      break;
    }
    case OP_TAILCALL: case OP_SETTABUP:  case OP_SETTABLE:
      break;
    default: lua_assert(0);
  }
}

开发者ID:lriki，项目名称:Volkoff，代码行数:57，代码来源:lvm.c

示例8: checkArgMode

static int checkArgMode (const Proto *pt, int r, enum OpArgMask mode) {
  switch (mode) {
    case OpArgN: check(r == 0); break;
    case OpArgU: break;
    case OpArgR: checkreg(pt, r); break;
    case OpArgK:
      check(ISK(r) ? INDEXK(r) < pt->sizek : r < pt->maxstacksize);
      break;
  }
  return 1;
}

开发者ID:GranPC，项目名称:llvm-lua，代码行数:11，代码来源:ldebug.c

示例9: emit_debug_trace

void RaviCodeGenerator::emit_BITWISE_SHIFT_OP(RaviFunctionDef *def, OpCode op,
                                              int A, int B, int C, int pc) {
  bool traced = emit_debug_trace(def, op, pc);
  emit_load_base(def);
  llvm::Value *ra = emit_gep_register(def, A);

  // If the RHS is a constant and we know that LHS is
  // and integer then we can optimize the code generation
  if (op == OP_RAVI_SHL_II && ISK(C)) {
    lua_Integer y = def->p->k[INDEXK(C)].value_.i;
    emit_bitwise_shiftl(def, ra, B, y);
  } else if (op == OP_RAVI_SHR_II && ISK(C)) {
    lua_Integer y = def->p->k[INDEXK(C)].value_.i;
    emit_bitwise_shiftl(def, ra, B, -y);
  } else {
    // RHS is not a constant
    llvm::Value *rc = emit_gep_register_or_constant(def, C);
    llvm::Value *rb = emit_gep_register_or_constant(def, B);

    // Since the Lua OP_SHL and OP_SHR bytecodes
    // could invoke metamethods we need to set
    // 'savedpc'
    switch (op) {
    case OP_SHL:
      if (!traced) emit_update_savedpc(def, pc);
    case OP_RAVI_SHL_II:
      CreateCall4(def->builder, def->raviV_op_shlF, def->L, ra, rb, rc);
      break;
    case OP_SHR:
      if (!traced) emit_update_savedpc(def, pc);
    case OP_RAVI_SHR_II:
      CreateCall4(def->builder, def->raviV_op_shrF, def->L, ra, rb, rc);
      break;
    default:
      fprintf(stderr, "unexpected value of opcode %d\n", (int)op);
      abort();
    }
  }
}

开发者ID:duchuan123，项目名称:ravi，代码行数:39，代码来源:ravi_llvmarith1.cpp

示例10: kname

/*
** find a "name" for the RK value 'c'
*/
static void kname (Proto *p, int pc, int c, const char **name) {
	if (ISK(c)) {  /* is 'c' a constant? */
	TValue *kvalue = &p->k[INDEXK(c)];
	if (ttisstring(kvalue)) {  /* literal constant? */
		*name = svalue(kvalue);  /* it is its own name */
		return;
	}
	/* else no reasonable name found */
	}
	else {  /* 'c' is a register */
	const char *what = getobjname(p, pc, c, name); /* search for 'c' */
	if (what && *what == 'c') {  /* found a constant name? */
		return;  /* 'name' already filled */
	}
	/* else no reasonable name found */
	}
	*name = "?";  /* no reasonable name found */
}

开发者ID:crazii，项目名称:mameplus，代码行数:21，代码来源:ldebug.c

示例11: kname2

/*
** find a "name" for the RK value 'c'
*/
void kname2 (LuaProto *p, int pc, int c, std::string& name) {
  if (ISK(c)) {  /* is 'c' a constant? */
    LuaValue *kvalue = &p->constants[INDEXK(c)];
    if (kvalue->isString()) {  /* literal constant? */
      name = kvalue->getString()->c_str();  /* it is its own name */
      return;
    }
    /* else no reasonable name found */
  }
  else {  /* 'c' is a register */
    const char *what = getobjname2(p, pc, c, name); /* search for 'c' */
    if (what && *what == 'c') {  /* found a constant name? */
      return;  /* 'name' already filled */
    }
    /* else no reasonable name found */
  }
  name = "?";  /* no reasonable name found */
}

开发者ID:aappleby，项目名称:Lumina，代码行数:21，代码来源:ldebug.cpp

示例12: freereg

static void ICACHE_FLASH_ATTR freereg (FuncState *fs, int reg) {
  if (!ISK(reg) && reg >= fs->nactvar) {
    fs->freereg--;
    lua_assert(reg == fs->freereg);
  }
}

开发者ID:Squonk42，项目名称:nodelua，代码行数:6，代码来源:lcode.c

示例13:

/*static*/ void FuncState::freereg (/*FuncState *fs,*/ int reg) {
	if (!ISK(reg) && reg >= nactvar) {
		free_reg--;
		lua_assert(reg == free_reg);
	}
}

开发者ID:swizl，项目名称:lua，代码行数:6，代码来源:lcode.cpp

示例14: PrintCode

static void PrintCode(const Proto* f)
{
 const Instruction* code=f->code;
 int pc,n=f->sizecode;
 for (pc=0; pc<n; pc++)
 {
  Instruction i=code[pc];
  OpCode o=GET_OPCODE(i);
  int a=GETARG_A(i);
  int b=GETARG_B(i);
  int c=GETARG_C(i);
  int ax=GETARG_Ax(i);
  int bx=GETARG_Bx(i);
  int sbx=GETARG_sBx(i);
  int line=getfuncline(f,pc);
  printf("\t%d\t",pc+1);
  if (line>0) printf("[%d]\t",line); else printf("[-]\t");
  printf("%-9s\t",luaP_opnames[o]);
  switch (getOpMode(o))
  {
   case iABC:
    printf("%d",a);
    if (getBMode(o)!=OpArgN) printf(" %d",ISK(b) ? (MYK(INDEXK(b))) : b);
    if (getCMode(o)!=OpArgN) printf(" %d",ISK(c) ? (MYK(INDEXK(c))) : c);
    break;
   case iABx:
    printf("%d",a);
    if (getBMode(o)==OpArgK) printf(" %d",MYK(bx));
    if (getBMode(o)==OpArgU) printf(" %d",bx);
    break;
   case iAsBx:
    printf("%d %d",a,sbx);
    break;
   case iAx:
    printf("%d",MYK(ax));
    break;
  }
  switch (o)
  {
   case OP_LOADK:
    printf("\t; "); PrintConstant(f,bx);
    break;
   case OP_GETUPVAL:
   case OP_SETUPVAL:
    printf("\t; %s",UPVALNAME(b));
    break;
   case OP_GETTABUP:
    printf("\t; %s",UPVALNAME(b));
    if (ISK(c)) { printf(" "); PrintConstant(f,INDEXK(c)); }
    break;
   case OP_SETTABUP:
    printf("\t; %s",UPVALNAME(a));
    if (ISK(b)) { printf(" "); PrintConstant(f,INDEXK(b)); }
    if (ISK(c)) { printf(" "); PrintConstant(f,INDEXK(c)); }
    break;
   case OP_GETTABLE:
   case OP_SELF:
    if (ISK(c)) { printf("\t; "); PrintConstant(f,INDEXK(c)); }
    break;
   case OP_SETTABLE:
   case OP_ADD:
   case OP_SUB:
   case OP_MUL:
   case OP_POW:
   case OP_DIV:
   case OP_IDIV:
   case OP_BAND:
   case OP_BOR:
   case OP_BXOR:
   case OP_SHL:
   case OP_SHR:
   case OP_EQ:
   case OP_LT:
   case OP_LE:
    if (ISK(b) || ISK(c))
    {
     printf("\t; ");
     if (ISK(b)) PrintConstant(f,INDEXK(b)); else printf("-");
     printf(" ");
     if (ISK(c)) PrintConstant(f,INDEXK(c)); else printf("-");
    }
    break;
   case OP_JMP:
   case OP_FORLOOP:
   case OP_FORPREP:
   case OP_TFORLOOP:
    printf("\t; to %d",sbx+pc+2);
    break;
   case OP_CLOSURE:
    printf("\t; %p",VOID(f->p[bx]));
    break;
   case OP_SETLIST:
    if (c==0) printf("\t; %d",(int)code[++pc]); else printf("\t; %d",c);
    break;
   case OP_EXTRAARG:
    printf("\t; "); PrintConstant(f,ax);
    break;
   default:
    break;
  }
//.........这里部分代码省略.........

开发者ID:bysdxt，项目名称:xLua，代码行数:101，代码来源:luac.c

示例15: freereg

static void freereg (FuncState *fs, int reg) {
  if (!ISK(reg)) {
    fs->freereg--;
    lua_assert(reg == fs->freereg);
  }
}

开发者ID:hongzhidao，项目名称:yet-another-lua，代码行数:6，代码来源:lcode.c

示例16: PrintCode

static void PrintCode(const Proto* f)
{
 const Instruction* code=f->code;
 int pc,n=f->sizecode;
 for (pc=0; pc<n; pc++)
 {
  Instruction i=code[pc];
  OpCode o=GET_OPCODE(i);
  int a=GETARG_A(i);
  int b=GETARG_B(i);
  int c=GETARG_C(i);
  int bx=GETARG_Bx(i);
  int sbx=GETARG_sBx(i);
  int line=getline(f,pc);
  printf("\t%d\t",pc+1);
  if (line>0) printf("[%d]\t",line); else printf("[-]\t");
  printf("%-9s\t",luaP_opnames[o]);
  switch (getOpMode(o))
  {
   case iABC:
    printf("%d",a);
    if (getBMode(o)!=OpArgN) printf(" %d",ISK(b) ? (-1-INDEXK(b)) : b);
    if (getCMode(o)!=OpArgN) printf(" %d",ISK(c) ? (-1-INDEXK(c)) : c);
    break;
   case iABx:
    if (getBMode(o)==OpArgK) printf("%d %d",a,-1-bx); else printf("%d %d",a,bx);
    break;
   case iAsBx:
    if (o==OP_JMP) printf("%d",sbx); else printf("%d %d",a,sbx);
    break;
  }
  switch (o)
  {
   case OP_LOADK:
    printf("\t; "); PrintConstant(f,bx);
    break;
   case OP_GETUPVAL:
   case OP_SETUPVAL:
    printf("\t; %s", (f->sizeupvalues>0) ? getstr(f->upvalues[b]) : "-");
    break;
   case OP_GETGLOBAL:
   case OP_SETGLOBAL:
    printf("\t; %s",svalue(&f->k[bx]));
    break;
   case OP_GETTABLE:
   case OP_SELF:
    if (ISK(c)) { printf("\t; "); PrintConstant(f,INDEXK(c)); }
    break;
   case OP_SETTABLE:
   case OP_ADD:
   case OP_SUB:
   case OP_MUL:
   case OP_DIV:
   case OP_POW:
   case OP_EQ:
   case OP_LT:
   case OP_LE:
    if (ISK(b) || ISK(c))
    {
     printf("\t; ");
     if (ISK(b)) PrintConstant(f,INDEXK(b)); else printf("-");
     printf(" ");
     if (ISK(c)) PrintConstant(f,INDEXK(c)); else printf("-");
    }
    break;
   case OP_JMP:
   case OP_FORLOOP:
   case OP_FORPREP:
    printf("\t; to %d",sbx+pc+2);
    break;
   case OP_CLOSURE:
    printf("\t; %p",VOID(f->p[bx]));
    break;
   case OP_SETLIST:
    if (c==0) printf("\t; %d",(int)code[++pc]);
    else printf("\t; %d",c);
    break;
   default:
    break;
  }
  printf("\n");
 }
}

开发者ID:DuMuT6p，项目名称:Epiar，代码行数:83，代码来源:print.c

示例17: luaU_guess_locals

int luaU_guess_locals(Proto* f, int main) {
	intArray blocklist;
	LocVarArray locallist;
	int regassign[MAXARG_A+1];
	int regusage[MAXARG_A+1];
	int regblock[MAXARG_A+1];
	int lastfree;
	int i,i2,x,pc;
	int func_endpc = FUNC_BLOCK_END(f);

	if (f->lineinfo != NULL) {
		return 0;
	}

	if (f->sizelocvars > 0) {
		return 0;
	}

	intArray_Init(&blocklist, MAXARG_A+1);
	addi(blocklist, func_endpc);

	LocVarArray_Init(&locallist, MAXARG_A+1);

	lastfree = 0;
	for (i=0; i<f->maxstacksize; i++) {
		regassign[i] = 0;
		regusage[i] = 0;
		regblock[i] = 0;
	}

	// parameters
	for (i = 0; i < f->numparams; i++) {
		add(locallist,0,func_endpc);
		regassign[lastfree] = 0;
		regusage[lastfree] = 1;
		regblock[lastfree] = func_endpc;
		lastfree++;
	}

	// vararg
	if (NEED_ARG(f)) {
		add(locallist,0,func_endpc);
		lastfree++;
		regassign[lastfree] = 0;
		regusage[lastfree] = 1;
		regblock[lastfree] = func_endpc;
		lastfree++;
	}

#if LUA_VERSION_NUM == 501
	// nil optimizations
	{
		Instruction i = f->code[0];
		OpCode o = GET_OPCODE(i);
		int a = GETARG_A(i);
		int b = GETARG_B(i);
		int c = GETARG_C(i);
		int ixx,num_nil = -1;
		switch (o) {
		// read Ra only
		case OP_SETGLOBAL:
		case OP_SETUPVAL:
		case OP_TESTSET:
			num_nil = a;
			break;
		// read Rb only
		case OP_MOVE:
		case OP_UNM:
		case OP_NOT:
		case OP_LEN:
			if (!ISK(b)) {
					num_nil = b;
			}
			break;
		// read Rb and Rc
		case OP_GETTABLE:
		case OP_SETTABLE:
		case OP_SELF:
		case OP_ADD:
		case OP_SUB:
		case OP_MUL:
		case OP_DIV:
		case OP_MOD:
		case OP_POW:
		case OP_EQ:
		case OP_LT:
		case OP_LE:
			if (!ISK(b)) {
				num_nil = b;
			}
			if (!ISK(c)) {
				num_nil = MAX(num_nil, c);
			}
			break;
		case OP_RETURN:
			// read Ra to a+b-2
			// only return 1 value
			// move before return multiple values
			num_nil = MAX(num_nil, a+b-2);
			break;
//.........这里部分代码省略.........

开发者ID:funny-sultan，项目名称:luadec，代码行数:101，代码来源:guess.c

示例18: BijouBlock_dump2


//.........这里部分代码省略.........
        if (ttisnumber(&kv_A(b->upvals, x))) B_FREE(str);
    }

    INDENT;
    printf("; code section (%zu instructions)\n", kv_size(b->code));
    for (x = 0; x < kv_size(b->code); ++x) {
        bInst i = kv_A(b->code, x);
        INDENT;
        print_op(i);
        printf("\t");

        switch (GET_OPCODE(i)) {
        case OP_MOVE:
            printf("; R[%d] = R[%d]", GETARG_A(i), GETARG_B(i));
            break;
        case OP_LOADK:
            printf("; R[%d] = K[%d]", GETARG_A(i), GETARG_Bx(i));
            break;
        case OP_LOADBOOL:
            printf("; R[%d] = %s", GETARG_A(i), GETARG_B(i) == 0 ? "false" : "true" );
            break;
        case OP_LOADNULL:
            printf("; R[%d] = null", GETARG_A(i));
            break;
        case OP_GETGLOBAL:
            printf("; R[%d] = globals[K[%d]]", GETARG_A(i), GETARG_Bx(i));
            break;
        case OP_SETGLOBAL:
            printf("; globals[K[%d]] = R[%d]", GETARG_Bx(i), GETARG_A(i));
            break;
        case OP_GETLOCAL:
            printf("; R[%d] = locals[K[%d]]", GETARG_A(i), GETARG_Bx(i));
            break;
        case OP_SETLOCAL:
            printf("; locals[K[%d]] = R[%d]", GETARG_Bx(i), GETARG_A(i));
            break;
        case OP_ADD:
            printf("; R[%d] = RK[%d] + RK[%d]", GETARG_A(i), GETARG_B(i),
                   GETARG_C(i));
            break;
        case OP_SUB:
            printf("; R[%d] = RK[%d] - RK[%d]", GETARG_A(i), GETARG_B(i),
                   GETARG_C(i));
            break;
        case OP_MUL:
            printf("; R[%d] = RK[%d] * RK[%d]", GETARG_A(i), GETARG_B(i),
                   GETARG_C(i));
            break;
        case OP_DIV:
            printf("; R[%d] = RK[%d] / RK[%d]", GETARG_A(i), GETARG_B(i),
                   GETARG_C(i));
            break;
        case OP_POW:
            printf("; R[%d] = RK[%d] ** RK[%d]", GETARG_A(i), GETARG_B(i),
                   GETARG_C(i));
            break;
        case OP_REM:
            printf("; R[%d] = RK[%d] %% RK[%d]", GETARG_A(i), GETARG_B(i),
                   GETARG_C(i));
            break;
        case OP_UNM:
            printf("; R[%d] = -RK[%d]", GETARG_A(i), GETARG_B(i));
            break;
        case OP_NOT:
            printf("; R[%d] = !RK[%d]", GETARG_A(i), GETARG_B(i));
            break;
        case OP_CLOSURE:
            printf("; R[%d] = ", GETARG_A(i));
            if (ISK(GETARG_Bx(i))) {
                BijouFunction *func = kv_A(vm->functions, GETARG_Bx(i) & ~0x100);
                printf("%s\n", func->name);
            } else
                printf("closure[%d] (%s)\n", GETARG_Bx(i),
                       b->children[GETARG_Bx(i)]->funcname);
            break;
        case OP_CALL:
            printf("; R[%d] = R[%d](", GETARG_A(i), GETARG_B(i));
            size_t x;
            for (x = 0; x < GETARG_C(i); ++x) {
                printf("R[%zu], ", x);
            }
            if (x > 0) {
                printf("\b\b");
            }
            printf(")");
            break;


        case OP_GETEXTERNAL:
            printf("; R[%d] = closure(K[%d])", GETARG_A(i), GETARG_B(i));
            break;
        }
        printf("\n");
    }
    INDENT;
    printf("; functions (%zu definitions)\n", b->numchildren);
    for (x = 0; x < b->numchildren; ++x) {
        BijouBlock_dump2(vm, b->children[x], level + 1);
    }
}

开发者ID:erik，项目名称:bijou，代码行数:101，代码来源:block.c

示例19: raviP_instruction_to_str

const char* raviP_instruction_to_str(char *buf, size_t n, Instruction i) {
  OpCode o = GET_OPCODE(i);
  int a = GETARG_A(i);
  int b = GETARG_B(i);
  int c = GETARG_C(i);
  int ax = GETARG_Ax(i);
  int bx = GETARG_Bx(i);
  int sbx = GETARG_sBx(i);
  snprintf(buf, n, "%s ", luaP_opnames[o]);
  switch (getOpMode(o)) {
  case iABC:
    snprintf(buf+strlen(buf), n-strlen(buf), "A=%d", a);
    if (getBMode(o) != OpArgN)
      snprintf(buf + strlen(buf), n - strlen(buf), " B=%d", (getBMode(o) == OpArgK && ISK(b)) ? (MYK(INDEXK(b))) : b);
    if (getCMode(o) != OpArgN)
      snprintf(buf + strlen(buf), n - strlen(buf), " C=%d", (getCMode(o) == OpArgK && ISK(c)) ? (MYK(INDEXK(c))) : c);
    break;
  case iABx:
    snprintf(buf + strlen(buf), n - strlen(buf), "A=%d", a);
    if (getBMode(o) == OpArgK)
      snprintf(buf + strlen(buf), n - strlen(buf), " Bx=%d", MYK(bx));
    if (getBMode(o) == OpArgU)
      snprintf(buf + strlen(buf), n - strlen(buf), " Bx=%d", bx);
    break;
  case iAsBx:
    snprintf(buf + strlen(buf), n - strlen(buf), "As=%d Bx=%d", a, sbx);
    break;
  case iAx:
    snprintf(buf + strlen(buf), n - strlen(buf), "Ax=%d", MYK(ax));
    break;
  }
  return buf;
}

开发者ID:galek，项目名称:ravi，代码行数:33，代码来源:lopcodes.c

注：本文中的ISK函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ ISNA函数代码示例发布时间：2022-05-30

C++ ISInit函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18257|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9673|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8175|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8547|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8455|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9387|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8427|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7861|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8411|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ ISK函数代码示例

示例1: do_getinstruction

示例2: ju_bytecode

示例3: freereg

示例4: kp_optimize_code

示例5: kname

示例6: isshortstr

示例7: luaV_finishOp

示例8: checkArgMode

示例9: emit_debug_trace

示例10: kname

示例11: kname2

示例12: freereg

示例13:

示例14: PrintCode

示例15: freereg

示例16: PrintCode

示例17: luaU_guess_locals

示例18: BijouBlock_dump2

示例19: raviP_instruction_to_str

请发表评论

全部评论

上一篇：

下一篇：

GitbookIO/gitbook:

juleswhite/mobile-cloud-asgn1

颜的笔顺,诠释颜的笔画,聊聊颜的部首

kyamagu/matlab-json: Use official API: h

墙壁眼睛膝盖

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053