C++ IS_DEBUG_OSPF函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中IS_DEBUG_OSPF函数的典型用法代码示例。如果您正苦于以下问题：C++ IS_DEBUG_OSPF函数的具体用法？C++ IS_DEBUG_OSPF怎么用？C++ IS_DEBUG_OSPF使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了IS_DEBUG_OSPF函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ospf_vl_up_check

void
ospf_vl_up_check (struct ospf_area *area, struct in_addr rid,
                  struct vertex *v)
{
  struct ospf *ospf = area->ospf;
  struct listnode *node;
  struct ospf_vl_data *vl_data;
  struct ospf_interface *oi;

  if (IS_DEBUG_OSPF_EVENT)
    {
      zlog_debug ("ospf_vl_up_check(): Start");
      zlog_debug ("ospf_vl_up_check(): Router ID is %s", inet_ntoa (rid));
      zlog_debug ("ospf_vl_up_check(): Area is %s", inet_ntoa (area->area_id));
    }

  for (node = listhead (ospf->vlinks); node; nextnode (node))
    {
      if ((vl_data = getdata (node)) == NULL)
        continue;
  
      if (IS_DEBUG_OSPF_EVENT)
	{
	  zlog_debug ("ospf_vl_up_check(): considering VL, name: %s", 
		     vl_data->vl_oi->ifp->name);
	  zlog_debug ("ospf_vl_up_check(): VL area: %s, peer ID: %s", 
		     inet_ntoa (vl_data->vl_area_id),
		     inet_ntoa (vl_data->vl_peer));
	}

      if (IPV4_ADDR_SAME (&vl_data->vl_peer, &rid) &&
          IPV4_ADDR_SAME (&vl_data->vl_area_id, &area->area_id))
        {
          oi = vl_data->vl_oi;
          SET_FLAG (vl_data->flags, OSPF_VL_FLAG_APPROVED);

	  if (IS_DEBUG_OSPF_EVENT)
	    zlog_debug ("ospf_vl_up_check(): this VL matched");

          if (oi->state == ISM_Down)
            {
	      if (IS_DEBUG_OSPF_EVENT)
		zlog_debug ("ospf_vl_up_check(): VL is down, waking it up");
              SET_FLAG (oi->ifp->flags, IFF_UP);
              OSPF_ISM_EVENT_EXECUTE(oi,ISM_InterfaceUp);
            }

         if (ospf_vl_set_params (vl_data, v))
           {
             if (IS_DEBUG_OSPF (ism, ISM_EVENTS))
               zlog_debug ("ospf_vl_up_check: VL cost change,"
                          " scheduling router lsa refresh");
             if(ospf->backbone)
               ospf_router_lsa_timer_add (ospf->backbone);
             else if (IS_DEBUG_OSPF (ism, ISM_EVENTS))
               zlog_debug ("ospf_vl_up_check: VL cost change, no backbone!");
           }
        }
    }
}

开发者ID:inet-framework，项目名称:inet-quagga，代码行数:60，代码来源:ospf_interface.c

示例2: ospf_vl_up_check

void
ospf_vl_up_check (struct ospf_area *area, struct in_addr rid,
                  struct vertex *v)
{
  struct ospf *ospf = area->ospf;
  struct listnode *node;
  struct ospf_vl_data *vl_data;
  struct ospf_interface *oi;

  if (IS_DEBUG_OSPF_EVENT)
    {
      zlog_debug ("ospf_vl_up_check(): Start");
      zlog_debug ("ospf_vl_up_check(): Router ID is %s", inet_ntoa (rid));
      zlog_debug ("ospf_vl_up_check(): Area is %s", inet_ntoa (area->area_id));
    }

  for (ALL_LIST_ELEMENTS_RO (ospf->vlinks, node, vl_data))
    {
      if (IS_DEBUG_OSPF_EVENT)
	{
	  zlog_debug ("%s: considering VL, %s in area %s", __func__,
		     vl_data->vl_oi->ifp->name,
		     inet_ntoa (vl_data->vl_area_id));
	  zlog_debug ("%s: peer ID: %s", __func__,
		     inet_ntoa (vl_data->vl_peer));
	}

      if (IPV4_ADDR_SAME (&vl_data->vl_peer, &rid) &&
          IPV4_ADDR_SAME (&vl_data->vl_area_id, &area->area_id))
        {
          oi = vl_data->vl_oi;
          SET_FLAG (vl_data->flags, OSPF_VL_FLAG_APPROVED);

	  if (IS_DEBUG_OSPF_EVENT)
	    zlog_debug ("ospf_vl_up_check(): this VL matched");

          if (oi->state == ISM_Down)
            {
	      if (IS_DEBUG_OSPF_EVENT)
		zlog_debug ("ospf_vl_up_check(): VL is down, waking it up");
              SET_FLAG (oi->ifp->flags, IFF_UP);
              OSPF_ISM_EVENT_EXECUTE(oi,ISM_InterfaceUp);
            }

         if (ospf_vl_set_params (vl_data, v))
           {
             if (IS_DEBUG_OSPF (ism, ISM_EVENTS))
               zlog_debug ("ospf_vl_up_check: VL cost change,"
                          " scheduling router lsa refresh");
             if (ospf->backbone)
               ospf_router_lsa_update_area (ospf->backbone);
             else if (IS_DEBUG_OSPF (ism, ISM_EVENTS))
               zlog_debug ("ospf_vl_up_check: VL cost change, no backbone!");
           }
        }
    }
}

开发者ID:CumulusNetworks，项目名称:quagga，代码行数:57，代码来源:ospf_interface.c

示例3: ospf_nsm_event

/* Execute NSM event process. */
int
ospf_nsm_event (struct thread *thread)
{
  int event;
  int next_state;
  struct ospf_neighbor *nbr;
  struct in_addr router_id;
  int old_state;
  struct ospf_interface *oi;

  nbr = THREAD_ARG (thread);
  event = THREAD_VAL (thread);
  router_id = nbr->router_id;

  old_state = nbr->state;
  oi = nbr->oi ;
  
  /* Call function. */
  next_state = (*(NSM [nbr->state][event].func))(nbr);

  /* When event is NSM_KillNbr or InactivityTimer, the neighbor is
     deleted. */
  if (event == NSM_KillNbr || event == NSM_InactivityTimer)
    {
      if (IS_DEBUG_OSPF (nsm, NSM_EVENTS))
	zlog_debug ("NSM[%s:%s]: neighbor deleted",
		   IF_NAME (oi), inet_ntoa (router_id));

      /* Timers are canceled in ospf_nbr_free, moreover we cannot call
         nsm_timer_set here because nbr is freed already!!!*/
      /*nsm_timer_set (nbr);*/

      return 0;
    }

  if (! next_state)
    next_state = NSM [nbr->state][event].next_state;

  if (IS_DEBUG_OSPF (nsm, NSM_EVENTS))
    zlog_debug ("NSM[%s:%s]: %s (%s)", IF_NAME (oi),
	       inet_ntoa (nbr->router_id),
	       LOOKUP (ospf_nsm_state_msg, nbr->state),
	       ospf_nsm_event_str [event]);
  
  /* If state is changed. */
  if (next_state != nbr->state)
    nsm_change_state (nbr, next_state);

  /* Make sure timer is set. */
  nsm_timer_set (nbr);

  return 0;
}

开发者ID:OPSF，项目名称:uClinux，代码行数:54，代码来源:ospf_nsm.c

示例4: ospf_adjust_sndbuflen

void
ospf_adjust_sndbuflen (struct ospf * ospf, int buflen)
{
  int ret, newbuflen;
  /* Check if any work has to be done at all. */
  if (ospf->maxsndbuflen >= buflen)
    return;
  if (IS_DEBUG_OSPF (zebra, ZEBRA_INTERFACE))
    zlog_debug ("%s: adjusting OSPF send buffer size to %d",
      __func__, buflen);
  if (ospfd_privs.change (ZPRIVS_RAISE))
    zlog_err ("%s: could not raise privs, %s", __func__,
      safe_strerror (errno));
  /* Now we try to set SO_SNDBUF to what our caller has requested
   * (the MTU of a newly added interface). However, if the OS has
   * truncated the actual buffer size to somewhat less size, try
   * to detect it and update our records appropriately. The OS
   * may allocate more buffer space, than requested, this isn't
   * a error.
   */
  ret = setsockopt_so_sendbuf (ospf->fd, buflen);
  newbuflen = getsockopt_so_sendbuf (ospf->fd);
  if (ret < 0 || newbuflen < buflen)
    zlog_warn ("%s: tried to set SO_SNDBUF to %d, but got %d",
      __func__, buflen, newbuflen);
  if (newbuflen >= 0)
    ospf->maxsndbuflen = newbuflen;
  else
    zlog_warn ("%s: failed to get SO_SNDBUF", __func__);
  if (ospfd_privs.change (ZPRIVS_LOWER))
    zlog_err ("%s: could not lower privs, %s", __func__,
      safe_strerror (errno));
}

开发者ID:Quagga，项目名称:historical，代码行数:33，代码来源:ospf_network.c

示例5: nsm_kill_nbr

static int
nsm_kill_nbr (struct ospf_neighbor *nbr)
{
  /* killing nbr_self is invalid */
  if (nbr == nbr->oi->nbr_self)
    {
      assert (nbr != nbr->oi->nbr_self);
      return 0;
    }
  
  if (nbr->oi->type == OSPF_IFTYPE_NBMA && nbr->nbr_nbma != NULL)
    {
      struct ospf_nbr_nbma *nbr_nbma = nbr->nbr_nbma;

      nbr_nbma->nbr = NULL;
      nbr_nbma->state_change = nbr->state_change;

      nbr->nbr_nbma = NULL;

      OSPF_POLL_TIMER_ON (nbr_nbma->t_poll, ospf_poll_timer,
			  nbr_nbma->v_poll);

      if (IS_DEBUG_OSPF (nsm, NSM_EVENTS))
	zlog_debug ("NSM[%s:%s]: Down (PollIntervalTimer scheduled)",
		   IF_NAME (nbr->oi), inet_ntoa (nbr->address.u.prefix4));  
    }

  return 0;
}

开发者ID:AsherBond，项目名称:quagga，代码行数:29，代码来源:ospf_nsm.c

示例6: ospf_interface_state_down

static int
ospf_interface_state_down (int command, struct zclient *zclient,
                           zebra_size_t length)
{
  struct interface *ifp;
  struct ospf_interface *oi;
  struct route_node *node;

  ifp = zebra_interface_state_read (zclient->ibuf);

  if (ifp == NULL)
    return 0;

  if (IS_DEBUG_OSPF (zebra, ZEBRA_INTERFACE))
    zlog_debug ("Zebra: Interface[%s] state change to down.", ifp->name);

  for (node = route_top (IF_OIFS (ifp)); node; node = route_next (node))
    {
      if ((oi = node->info) == NULL)
        continue;
      ospf_if_down (oi);
    }

  return 0;
}

开发者ID:LabNConsulting，项目名称:OLD-quagga-patches，代码行数:25，代码来源:ospf_zebra.c

示例7: ospf_interface_address_add

static int
ospf_interface_address_add (int command, struct zclient *zclient,
                            zebra_size_t length)
{
  struct connected *c;

  c = zebra_interface_address_read (command, zclient->ibuf);

  if (c == NULL)
    return 0;

  if (IS_DEBUG_OSPF (zebra, ZEBRA_INTERFACE))
    {
      char buf[128];
      prefix2str(c->address, buf, sizeof(buf));
      zlog_debug("Zebra: interface %s address add %s", c->ifp->name, buf);
    }

  ospf_if_update (NULL, c->ifp);

#ifdef HAVE_SNMP
  ospf_snmp_if_update (c->ifp);
#endif /* HAVE_SNMP */

  return 0;
}

开发者ID:LabNConsulting，项目名称:OLD-quagga-patches，代码行数:26，代码来源:ospf_zebra.c

示例8: ospf_interface_delete

static int
ospf_interface_delete (int command, struct zclient *zclient,
                       zebra_size_t length)
{
  struct interface *ifp;
  struct stream *s;
  struct route_node *rn;

  s = zclient->ibuf;
  /* zebra_interface_state_read() updates interface structure in iflist */
  ifp = zebra_interface_state_read (s);

  if (ifp == NULL)
    return 0;

  if (if_is_up (ifp))
    zlog_warn ("Zebra: got delete of %s, but interface is still up",
               ifp->name);

  if (IS_DEBUG_OSPF (zebra, ZEBRA_INTERFACE))
    zlog_debug
      ("Zebra: interface delete %s index %d flags %llx metric %d mtu %d",
       ifp->name, ifp->ifindex, (unsigned long long)ifp->flags, ifp->metric, ifp->mtu);

#ifdef HAVE_SNMP
  ospf_snmp_if_delete (ifp);
#endif /* HAVE_SNMP */

  for (rn = route_top (IF_OIFS (ifp)); rn; rn = route_next (rn))
    if (rn->info)
      ospf_if_free ((struct ospf_interface *) rn->info);

  ifp->ifindex = IFINDEX_INTERNAL;
  return 0;
}

开发者ID:LabNConsulting，项目名称:OLD-quagga-patches，代码行数:35，代码来源:ospf_zebra.c

示例9: ospf_ism_event

/* Execute ISM event process. */
int
ospf_ism_event (struct thread *thread)
{
  int event;
  int next_state;
  struct ospf_interface *oi;

  oi = THREAD_ARG (thread);
  event = THREAD_VAL (thread);

  /* Call function. */
  next_state = (*(ISM [oi->state][event].func))(oi);

  if (! next_state)
    next_state = ISM [oi->state][event].next_state;

  if (IS_DEBUG_OSPF (ism, ISM_EVENTS))
    zlog (NULL, LOG_DEBUG, "ISM[%s]: %s (%s)", IF_NAME (oi),
	  LOOKUP (ospf_ism_state_msg, oi->state),
	  ospf_ism_event_str[event]);

  /* If state is changed. */
  if (next_state != oi->state)
    ism_change_state (oi, next_state);

  /* Make sure timer is set. */
  ism_timer_set (oi);

  return 0;
}

开发者ID:ColinBS，项目名称:quagga-rtrlib，代码行数:31，代码来源:ospf_ism.c

示例10: ospf_interface_add

/* Inteface addition message from zebra. */
static int
ospf_interface_add (int command, struct zclient *zclient, zebra_size_t length)
{
  struct interface *ifp;

  ifp = zebra_interface_add_read (zclient->ibuf);

  if (IS_DEBUG_OSPF (zebra, ZEBRA_INTERFACE))
    zlog_debug ("Zebra: interface add %s index %d flags %llx metric %d mtu %d",
               ifp->name, ifp->ifindex, (unsigned long long)ifp->flags,
               ifp->metric, ifp->mtu);

  assert (ifp->info);

  if (!OSPF_IF_PARAM_CONFIGURED (IF_DEF_PARAMS (ifp), type))
    {
      SET_IF_PARAM (IF_DEF_PARAMS (ifp), type);
      IF_DEF_PARAMS (ifp)->type = ospf_default_iftype(ifp);
    }

  ospf_if_update (NULL, ifp);

#ifdef HAVE_SNMP
  ospf_snmp_if_update (ifp);
#endif /* HAVE_SNMP */

  return 0;
}

开发者ID:LabNConsulting，项目名称:OLD-quagga-patches，代码行数:29，代码来源:ospf_zebra.c

示例11: ospf_adjust_sndbuflen_oisock

void ospf_adjust_sndbuflen_oisock (struct ospf * ospf, int buflen,struct ospf_interface *oi)
{
    int ret, newbuflen;
    /* Check if any work has to be done at all. */
    if (ospf->maxsndbuflen >= buflen)
    {
        return;
    }
    if (IS_DEBUG_OSPF (zebra, ZEBRA_INTERFACE))
    {
        zlog_debug ("%s: adjusting OSPF send buffer size to %d",
                    __func__, buflen);
    }

    ret = setsockopt_so_sendbuf (oi->packet_fd, buflen);
    
    newbuflen = getsockopt_so_sendbuf (oi->packet_fd);
    if (ret < 0 || newbuflen < buflen)
    {
        zlog_warn ("%s: tried to set SO_SNDBUF to %d, but got %d",
                    __func__, buflen, newbuflen);
    }
    if (newbuflen >= 0)
    {
        ospf->maxsndbuflen = newbuflen;
    }
    else
    {
        zlog_warn ("%s: failed to get SO_SNDBUF", __func__);
    }

}

开发者ID:millken，项目名称:zhuxianB30，代码行数:32，代码来源:ospf_network.c

示例12: ism_ignore

static int
ism_ignore (struct ospf_interface *oi)
{
  if (IS_DEBUG_OSPF (ism, ISM_EVENTS))
    zlog (NULL, LOG_DEBUG, "ISM[%s]: ism_ignore called", IF_NAME (oi));

  return 0;
}

开发者ID:ColinBS，项目名称:quagga-rtrlib，代码行数:8，代码来源:ospf_ism.c

示例13: ism_change_state

void
ism_change_state (struct ospf_interface *oi, int state)
{
  int old_state;
  struct ospf_lsa *lsa;

  /* Logging change of state. */
  if (IS_DEBUG_OSPF (ism, ISM_STATUS))
    zlog (NULL, LOG_DEBUG, "ISM[%s]: State change %s -> %s", IF_NAME (oi),
	  LOOKUP (ospf_ism_state_msg, oi->state),
	  LOOKUP (ospf_ism_state_msg, state));

  old_state = oi->state;
  oi->state = state;
  oi->state_change++;

  if (old_state == ISM_Down || state == ISM_Down)
    ospf_check_abr_status (oi->ospf);

  /* Originate router-LSA. */
  if (oi->area)
    {
      if (state == ISM_Down)
	{
	  if (oi->area->act_ints > 0)
	    oi->area->act_ints--;
	}
      else if (old_state == ISM_Down)
	oi->area->act_ints++;

      /* schedule router-LSA originate. */
      ospf_router_lsa_timer_add (oi->area);
    }

  /* Originate network-LSA. */
  if (old_state != ISM_DR && state == ISM_DR)
    ospf_network_lsa_timer_add (oi);
  else if (old_state == ISM_DR && state != ISM_DR)
    {
      /* Free self originated network LSA. */
      lsa = oi->network_lsa_self;
      if (lsa)
	{
	  ospf_lsa_flush_area (lsa, oi->area);
	  OSPF_TIMER_OFF (oi->t_network_lsa_self);
	}

      ospf_lsa_unlock (oi->network_lsa_self);
      oi->network_lsa_self = NULL;
    }

#ifdef HAVE_OPAQUE_LSA
  ospf_opaque_ism_change (oi, old_state);
#endif /* HAVE_OPAQUE_LSA */

  /* Check area border status.  */
  ospf_check_abr_status (oi->ospf);
}

开发者ID:inet-framework，项目名称:inet-quagga，代码行数:58，代码来源:ospf_ism.c

示例14: nsm_ignore

/* OSPF NSM functions. */
int
nsm_ignore (struct ospf_neighbor *nbr)
{
  if (IS_DEBUG_OSPF (nsm, NSM_EVENTS))
    zlog (NULL, LOG_DEBUG, "NSM[%s:%s]: nsm_ignore called",
	  IF_NAME (nbr->oi), inet_ntoa (nbr->router_id));

  return 0;
}

开发者ID:OPSF，项目名称:uClinux，代码行数:10，代码来源:ospf_nsm.c

示例15: ospf_interface_address_delete

static int
ospf_interface_address_delete (int command, struct zclient *zclient,
                               zebra_size_t length)
{
  struct ospf *ospf;
  struct connected *c;
  struct interface *ifp;
  struct ospf_interface *oi;
  struct route_node *rn;
  struct prefix p;

  c = zebra_interface_address_read (command, zclient->ibuf);

  if (c == NULL)
    return 0;

  if (IS_DEBUG_OSPF (zebra, ZEBRA_INTERFACE))
    {
      char buf[128];
      prefix2str(c->address, buf, sizeof(buf));
      zlog_debug("Zebra: interface %s address delete %s", c->ifp->name, buf);
    }

  ifp = c->ifp;
  p = *c->address;
  p.prefixlen = IPV4_MAX_PREFIXLEN;

  rn = route_node_lookup (IF_OIFS (ifp), &p);
  if (!rn)
    {
      connected_free (c);
      return 0;
    }

  assert (rn->info);
  oi = rn->info;

  /* Call interface hook functions to clean up */
  ospf_if_free (oi);

#ifdef HAVE_SNMP
  ospf_snmp_if_update (c->ifp);
#endif /* HAVE_SNMP */

  connected_free (c);

  ospf = ospf_lookup ();
  if (ospf != NULL)
    ospf_if_update (ospf);

  return 0;
}

开发者ID:Quagga，项目名称:historical，代码行数:52，代码来源:ospf_zebra.c

示例16: ospf_wait_timer

static int ospf_wait_timer(struct thread *thread)
{
	struct ospf_interface *oi;

	oi = THREAD_ARG(thread);
	oi->t_wait = NULL;

	if (IS_DEBUG_OSPF(ism, ISM_TIMERS))
		zlog(NULL, LOG_DEBUG, "ISM[%s]: Timer (Wait timer expire)",
		     IF_NAME(oi));

	OSPF_ISM_EVENT_SCHEDULE(oi, ISM_WaitTimer);

	return 0;
}

开发者ID:yubo，项目名称:quagga，代码行数:15，代码来源:ospf_ism.c

示例17: nsm_notice_state_change

static void
nsm_notice_state_change (struct ospf_neighbor *nbr, int next_state, int event)
{
  /* Logging change of status. */
  if (IS_DEBUG_OSPF (nsm, NSM_STATUS))
    zlog_debug ("NSM[%s:%s]: State change %s -> %s (%s)",
               IF_NAME (nbr->oi), inet_ntoa (nbr->router_id),
               LOOKUP (ospf_nsm_state_msg, nbr->state),
               LOOKUP (ospf_nsm_state_msg, next_state),
               ospf_nsm_event_str [event]);

  /* Optionally notify about adjacency changes */
  if (CHECK_FLAG(nbr->oi->ospf->config, OSPF_LOG_ADJACENCY_CHANGES) &&
      (CHECK_FLAG(nbr->oi->ospf->config, OSPF_LOG_ADJACENCY_DETAIL) ||
       (next_state == NSM_Full) || (next_state < nbr->state)))
    zlog_notice("AdjChg: Nbr %s on %s: %s -> %s (%s)",
                inet_ntoa (nbr->router_id), IF_NAME (nbr->oi),
                LOOKUP (ospf_nsm_state_msg, nbr->state),
                LOOKUP (ospf_nsm_state_msg, next_state),
                ospf_nsm_event_str [event]);

  /* Advance in NSM */
  if (next_state > nbr->state)
    nbr->ts_last_progress = recent_relative_time ();
  else /* regression in NSM */
    {
      nbr->ts_last_regress = recent_relative_time ();
      nbr->last_regress_str = ospf_nsm_event_str [event];
    }

#ifdef HAVE_SNMP
  /* Terminal state or regression */ 
  if ((next_state == NSM_Full) 
      || (next_state == NSM_TwoWay)
      || (next_state < nbr->state))
    {
      /* ospfVirtNbrStateChange */
      if (nbr->oi->type == OSPF_IFTYPE_VIRTUALLINK)
        ospfTrapVirtNbrStateChange(nbr);
      /* ospfNbrStateChange trap  */
      else	
        /* To/From FULL, only managed by DR */
        if (((next_state != NSM_Full) && (nbr->state != NSM_Full)) 
            || (nbr->oi->state == ISM_DR))
          ospfTrapNbrStateChange(nbr);
    }
#endif
}

开发者ID:AsherBond，项目名称:quagga，代码行数:48，代码来源:ospf_nsm.c

示例18: ospf_inactivity_timer

/* OSPF NSM Timer functions. */
int
ospf_inactivity_timer (struct thread *thread)
{
  struct ospf_neighbor *nbr;

  nbr = THREAD_ARG (thread);
  nbr->t_inactivity = NULL;

  if (IS_DEBUG_OSPF (nsm, NSM_TIMERS))
    zlog (NULL, LOG_DEBUG, "NSM[%s:%s]: Timer (Inactivity timer expire)",
	  IF_NAME (nbr->oi), inet_ntoa (nbr->router_id));

  OSPF_NSM_EVENT_SCHEDULE (nbr, NSM_InactivityTimer);

  return 0;
}

开发者ID:OPSF，项目名称:uClinux，代码行数:17，代码来源:ospf_nsm.c

示例19: ospf_hello_timer

int ospf_hello_timer(struct thread *thread)
{
	struct ospf_interface *oi;

	oi = THREAD_ARG(thread);
	oi->t_hello = NULL;

	if (IS_DEBUG_OSPF(ism, ISM_TIMERS))
		zlog(NULL, LOG_DEBUG, "ISM[%s]: Timer (Hello timer expire)",
		     IF_NAME(oi));

	/* Sending hello packet. */
	ospf_hello_send(oi);

	/* Hello timer set. */
	OSPF_HELLO_TIMER_ON(oi);

	return 0;
}

开发者ID:yubo，项目名称:quagga，代码行数:19，代码来源:ospf_ism.c

示例20: ospf_db_desc_timer

static int
ospf_db_desc_timer (struct thread *thread)
{
  struct ospf_neighbor *nbr;

  nbr = THREAD_ARG (thread);
  nbr->t_db_desc = NULL;

  if (IS_DEBUG_OSPF (nsm, NSM_TIMERS))
    zlog (NULL, LOG_DEBUG, "NSM[%s:%s]: Timer (DD Retransmit timer expire)",
	  IF_NAME (nbr->oi), inet_ntoa (nbr->src));

  /* resent last send DD packet. */
  assert (nbr->last_send);
  ospf_db_desc_resend (nbr);

  /* DD Retransmit timer set. */
  OSPF_NSM_TIMER_ON (nbr->t_db_desc, ospf_db_desc_timer, nbr->v_db_desc);

  return 0;
}

开发者ID:AsherBond，项目名称:quagga，代码行数:21，代码来源:ospf_nsm.c

注：本文中的IS_DEBUG_OSPF函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ IS_DIGIT函数代码示例发布时间：2022-05-30

C++ IS_DAC_CHANNEL函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18257|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9673|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8175|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8547|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8455|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9387|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8427|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7861|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8411|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ IS_DEBUG_OSPF函数代码示例

示例1: ospf_vl_up_check

示例2: ospf_vl_up_check

示例3: ospf_nsm_event

示例4: ospf_adjust_sndbuflen

示例5: nsm_kill_nbr

示例6: ospf_interface_state_down

示例7: ospf_interface_address_add

示例8: ospf_interface_delete

示例9: ospf_ism_event

示例10: ospf_interface_add

示例11: ospf_adjust_sndbuflen_oisock

示例12: ism_ignore

示例13: ism_change_state

示例14: nsm_ignore

示例15: ospf_interface_address_delete

示例16: ospf_wait_timer

示例17: nsm_notice_state_change

示例18: ospf_inactivity_timer

示例19: ospf_hello_timer

示例20: ospf_db_desc_timer

请发表评论

全部评论

上一篇：

下一篇：

GitbookIO/gitbook:

juleswhite/mobile-cloud-asgn1

颜的笔顺,诠释颜的笔画,聊聊颜的部首

kyamagu/matlab-json: Use official API: h

墙壁眼睛膝盖

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053