• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号

C++ IS_ERR函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中IS_ERR函数的典型用法代码示例。如果您正苦于以下问题:C++ IS_ERR函数的具体用法?C++ IS_ERR怎么用?C++ IS_ERR使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了IS_ERR函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: tegra_otg_probe

static int tegra_otg_probe(struct platform_device *pdev)
{
	struct tegra_otg_data *tegra;
	struct resource *res;
	int err;

	tegra = kzalloc(sizeof(struct tegra_otg_data), GFP_KERNEL);
	if (!tegra)
		return -ENOMEM;

	tegra->otg.dev = &pdev->dev;
	tegra->otg.label = "tegra-otg";
	tegra->otg.state = OTG_STATE_UNDEFINED;
	tegra->otg.set_host = tegra_otg_set_host;
	tegra->otg.set_peripheral = tegra_otg_set_peripheral;
	tegra->otg.set_suspend = tegra_otg_set_suspend;
	tegra->otg.set_power = tegra_otg_set_power;
	spin_lock_init(&tegra->lock);
        wake_lock_init(&usb_wake_lock, WAKE_LOCK_SUSPEND, "tegra_otg");

	platform_set_drvdata(pdev, tegra);

	tegra->clk = clk_get(&pdev->dev, NULL);
	if (IS_ERR(tegra->clk)) {
		dev_err(&pdev->dev, "Can't get otg clock\n");
		err = PTR_ERR(tegra->clk);
		goto err_clk;
	}

	err = clk_enable(tegra->clk);
	if (err)
		goto err_clken;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res) {
		dev_err(&pdev->dev, "Failed to get I/O memory\n");
		err = -ENXIO;
		goto err_io;
	}
	tegra->regs = ioremap(res->start, resource_size(res));
	if (!tegra->regs) {
		err = -ENOMEM;
		goto err_io;
	}

	tegra->otg.state = OTG_STATE_A_SUSPEND;

	err = otg_set_transceiver(&tegra->otg);
	if (err) {
		dev_err(&pdev->dev, "can't register transceiver (%d)\n", err);
		goto err_otg;
	}

	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
	if (!res) {
		dev_err(&pdev->dev, "Failed to get IRQ\n");
		err = -ENXIO;
		goto err_irq;
	}
	tegra->irq = res->start;
	err = request_threaded_irq(tegra->irq, tegra_otg_irq,
				   NULL,
				   IRQF_SHARED, "tegra-otg", tegra);
	if (err) {
		dev_err(&pdev->dev, "Failed to register IRQ\n");
		goto err_irq;
	}
	INIT_WORK (&tegra->work, irq_work);

	dev_info(&pdev->dev, "otg transceiver registered\n");
	return 0;

err_irq:
	otg_set_transceiver(NULL);
err_otg:
	iounmap(tegra->regs);
err_io:
	clk_disable(tegra->clk);
err_clken:
	clk_put(tegra->clk);
err_clk:
	platform_set_drvdata(pdev, NULL);
	kfree(tegra);
	return err;
}
开发者ID:mdeejay,项目名称:picasso-hc-kernel,代码行数:85,代码来源:tegra-otg.c


示例2: ext4_inline_data_truncate

void ext4_inline_data_truncate(struct inode *inode, int *has_inline)
{
	handle_t *handle;
	int inline_size, value_len, needed_blocks;
	size_t i_size;
	void *value = NULL;
	struct ext4_xattr_ibody_find is = {
		.s = { .not_found = -ENODATA, },
	};
	struct ext4_xattr_info i = {
		.name_index = EXT4_XATTR_INDEX_SYSTEM,
		.name = EXT4_XATTR_SYSTEM_DATA,
	};


	needed_blocks = ext4_writepage_trans_blocks(inode);
	handle = ext4_journal_start(inode, EXT4_HT_INODE, needed_blocks);
	if (IS_ERR(handle))
		return;

	down_write(&EXT4_I(inode)->xattr_sem);
	if (!ext4_has_inline_data(inode)) {
		*has_inline = 0;
		ext4_journal_stop(handle);
		return;
	}

	if (ext4_orphan_add(handle, inode))
		goto out;

	if (ext4_get_inode_loc(inode, &is.iloc))
		goto out;

	down_write(&EXT4_I(inode)->i_data_sem);
	i_size = inode->i_size;
	inline_size = ext4_get_inline_size(inode);
	EXT4_I(inode)->i_disksize = i_size;

	if (i_size < inline_size) {
		/* Clear the content in the xattr space. */
		if (inline_size > EXT4_MIN_INLINE_DATA_SIZE) {
			if (ext4_xattr_ibody_find(inode, &i, &is))
				goto out_error;

			BUG_ON(is.s.not_found);

			value_len = le32_to_cpu(is.s.here->e_value_size);
			value = kmalloc(value_len, GFP_NOFS);
			if (!value)
				goto out_error;

			if (ext4_xattr_ibody_get(inode, i.name_index, i.name,
						value, value_len))
				goto out_error;

			i.value = value;
			i.value_len = i_size > EXT4_MIN_INLINE_DATA_SIZE ?
					i_size - EXT4_MIN_INLINE_DATA_SIZE : 0;
			if (ext4_xattr_ibody_inline_set(handle, inode, &i, &is))
				goto out_error;
		}

		/* Clear the content within i_blocks. */
		if (i_size < EXT4_MIN_INLINE_DATA_SIZE) {
			void *p = (void *) ext4_raw_inode(&is.iloc)->i_block;
			memset(p + i_size, 0,
			       EXT4_MIN_INLINE_DATA_SIZE - i_size);
		}

		EXT4_I(inode)->i_inline_size = i_size <
					EXT4_MIN_INLINE_DATA_SIZE ?
					EXT4_MIN_INLINE_DATA_SIZE : i_size;
	}

out_error:
	up_write(&EXT4_I(inode)->i_data_sem);
out:
	brelse(is.iloc.bh);
	up_write(&EXT4_I(inode)->xattr_sem);
	kfree(value);
	if (inode->i_nlink)
		ext4_orphan_del(handle, inode);

	inode->i_mtime = inode->i_ctime = ext4_current_time(inode);
	ext4_mark_inode_dirty(handle, inode);
	if (IS_SYNC(inode))
		ext4_handle_sync(handle);

	ext4_journal_stop(handle);
	return;
}
开发者ID:AudioGod,项目名称:Gods_kernel_yu_msm8916,代码行数:91,代码来源:inline.c


示例3: rtlx_module_init

static int __init rtlx_module_init(void)
{
	struct device *dev;
	int i, err;

	if (!cpu_has_mipsmt) {
		printk("VPE loader: not a MIPS MT capable processor\n");
		return -ENODEV;
	}

	if (tclimit == 0) {
		printk(KERN_WARNING "No TCs reserved for AP/SP, not "
		       "initializing RTLX.\nPass maxtcs=<n> argument as kernel "
		       "argument\n");

		return -ENODEV;
	}

	major = register_chrdev(0, module_name, &rtlx_fops);
	if (major < 0) {
		printk(register_chrdev_failed);
		return major;
	}

	/* initialise the wait queues */
	for (i = 0; i < RTLX_CHANNELS; i++) {
		init_waitqueue_head(&channel_wqs[i].rt_queue);
		init_waitqueue_head(&channel_wqs[i].lx_queue);
		atomic_set(&channel_wqs[i].in_open, 0);
		mutex_init(&channel_wqs[i].mutex);

		dev = device_create(mt_class, NULL, MKDEV(major, i), NULL,
				    "%s%d", module_name, i);
		if (IS_ERR(dev)) {
			err = PTR_ERR(dev);
			goto out_chrdev;
		}
	}

	/* set up notifiers */
	notify.start = starting;
	notify.stop = stopping;
	vpe_notify(tclimit, &notify);

	if (cpu_has_vint)
		set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch);
	else {
		pr_err("APRP RTLX init on non-vectored-interrupt processor\n");
		err = -ENODEV;
		goto out_chrdev;
	}

	rtlx_irq.dev_id = rtlx;
	setup_irq(rtlx_irq_num, &rtlx_irq);

	return 0;

out_chrdev:
	for (i = 0; i < RTLX_CHANNELS; i++)
		device_destroy(mt_class, MKDEV(major, i));

	return err;
}
开发者ID:007kumarraja,项目名称:rockchip-rk3188-mk908,代码行数:63,代码来源:rtlx.c


示例4: hfs_brec_insert

int hfs_brec_insert(struct hfs_find_data *fd, void *entry, int entry_len)
{
	struct hfs_btree *tree;
	struct hfs_bnode *node, *new_node;
	int size, key_len, rec;
	int data_off, end_off;
	int idx_rec_off, data_rec_off, end_rec_off;
	__be32 cnid;

	tree = fd->tree;
	if (!fd->bnode) {
		if (!tree->root)
			hfs_btree_inc_height(tree);
		fd->bnode = hfs_bnode_find(tree, tree->leaf_head);
		if (IS_ERR(fd->bnode))
			return PTR_ERR(fd->bnode);
		fd->record = -1;
	}
	new_node = NULL;
	key_len = be16_to_cpu(fd->search_key->key_len) + 2;
again:
	/* new record idx and complete record size */
	rec = fd->record + 1;
	size = key_len + entry_len;

	node = fd->bnode;
	hfs_bnode_dump(node);
	/* get last offset */
	end_rec_off = tree->node_size - (node->num_recs + 1) * 2;
	end_off = hfs_bnode_read_u16(node, end_rec_off);
	end_rec_off -= 2;
	hfs_dbg(BNODE_MOD, "insert_rec: %d, %d, %d, %d\n",
		rec, size, end_off, end_rec_off);
	if (size > end_rec_off - end_off) {
		if (new_node)
			panic("not enough room!\n");
		new_node = hfs_bnode_split(fd);
		if (IS_ERR(new_node))
			return PTR_ERR(new_node);
		goto again;
	}
	if (node->type == HFS_NODE_LEAF) {
		tree->leaf_count++;
		mark_inode_dirty(tree->inode);
	}
	node->num_recs++;
	/* write new last offset */
	hfs_bnode_write_u16(node,
		offsetof(struct hfs_bnode_desc, num_recs),
		node->num_recs);
	hfs_bnode_write_u16(node, end_rec_off, end_off + size);
	data_off = end_off;
	data_rec_off = end_rec_off + 2;
	idx_rec_off = tree->node_size - (rec + 1) * 2;
	if (idx_rec_off == data_rec_off)
		goto skip;
	/* move all following entries */
	do {
		data_off = hfs_bnode_read_u16(node, data_rec_off + 2);
		hfs_bnode_write_u16(node, data_rec_off, data_off + size);
		data_rec_off += 2;
	} while (data_rec_off < idx_rec_off);

	/* move data away */
	hfs_bnode_move(node, data_off + size, data_off,
		       end_off - data_off);

skip:
	hfs_bnode_write(node, fd->search_key, data_off, key_len);
	hfs_bnode_write(node, entry, data_off + key_len, entry_len);
	hfs_bnode_dump(node);

	if (new_node) {
		/* update parent key if we inserted a key
		 * at the start of the first node
		 */
		if (!rec && new_node != node)
			hfs_brec_update_parent(fd);

		hfs_bnode_put(fd->bnode);
		if (!new_node->parent) {
			hfs_btree_inc_height(tree);
			new_node->parent = tree->root;
		}
		fd->bnode = hfs_bnode_find(tree, new_node->parent);

		/* create index data entry */
		cnid = cpu_to_be32(new_node->this);
		entry = &cnid;
		entry_len = sizeof(cnid);

		/* get index key */
		hfs_bnode_read_key(new_node, fd->search_key, 14);
		__hfs_brec_find(fd->bnode, fd, hfs_find_rec_by_key);

		hfs_bnode_put(new_node);
		new_node = NULL;

		if ((tree->attributes & HFS_TREE_VARIDXKEYS) ||
				(tree->cnid == HFSPLUS_ATTR_CNID))
//.........这里部分代码省略.........
开发者ID:383530895,项目名称:linux,代码行数:101,代码来源:brec.c


示例5: db8131m_power_on

static int db8131m_power_on(void)
{
	struct regulator *regulator;
	int ret = 0;

	pr_debug("%s: in", __func__);

	db8131m_gpio_request();

	/* 5M_CAM_nSTBY(5M STBY) LOW */
	ret = gpio_request(GPIO_5M_CAM_nSTBY, "GPM0");
	if (ret) {
		pr_err("faile to request gpio(GPIO_5M_CAM_nSTBY)");
		return ret;
	}
	ret = gpio_direction_output(GPIO_5M_CAM_nSTBY, 0);
	CAM_CHECK_ERR_RET(ret, "low 5M_CAM_nSTBY");

	/* 5M_CAM_RESET(5M RESET) LOW */
	ret = gpio_request(GPIO_5M_CAM_RESET, "GPF1");
	if (ret) {
		pr_err("faile to request gpio(GPIO_5M_CAM_RESET)");
		return ret;
	}
	ret = gpio_direction_output(GPIO_5M_CAM_RESET, 0);
	CAM_CHECK_ERR_RET(ret, "low 5M_CAM_RESET");

	/* VT_CAM_1.8V(VDDIO) */
	regulator = regulator_get(NULL, "vt_cam_1.8v");
	if (IS_ERR(regulator))
		return -ENODEV;
	ret = regulator_enable(regulator);
	regulator_put(regulator);
	CAM_CHECK_ERR_RET(ret, "enable vt_cam_1.8v");

	/* CAM_SENSOR_A2.8V */
	regulator = regulator_get(NULL, "cam_sensor_a2.8v");
	if (IS_ERR(regulator))
		return -ENODEV;
	ret = regulator_enable(regulator);
	regulator_put(regulator);
	CAM_CHECK_ERR_RET(ret, "enable cam_sensor_a2.8v");

	/* CAM_DVDD_1.5V(1.3M Core 1.8V) */
	regulator = regulator_get(NULL, "cam_dvdd_1.5v");
	if (IS_ERR(regulator))
		return -ENODEV;
	ret = regulator_enable(regulator);
	regulator_put(regulator);
	CAM_CHECK_ERR_RET(ret, "enable cam_dvdd_1.5v");

	/* CAM_ISP_CORE_1.2V ENABLE */
	regulator = regulator_get(NULL, "cam_isp_core_1.2v");
	if (IS_ERR(regulator))
		return -ENODEV;
	ret = regulator_enable(regulator);
	CAM_CHECK_ERR_RET(ret, "enable cam_isp_core_1.2v");

	mdelay(2);		/* 1ms */

	/* CAM_ISP_CORE_1.2V DISABLE */
	ret = regulator_force_disable(regulator);
	regulator_put(regulator);
	CAM_CHECK_ERR_RET(ret, "disable cam_isp_core_1.2v");

	/* VT_CAM_nSTBY(1.3M EN) EN */
	ret = gpio_direction_output(GPIO_VT_CAM_nSTBY, 1);
	CAM_CHECK_ERR_RET(ret, "high VT_CAM_nSTBY");

	/* MCLK */
	ret = s3c_gpio_cfgpin(GPIO_CAM_MCLK, S3C_GPIO_SFN(2));
	CAM_CHECK_ERR_RET(ret, "cfg mclk");
	s3c_gpio_setpull(GPIO_CAM_MCLK, S3C_GPIO_PULL_NONE);

	mdelay(1);		/* 20us */

	/* CAM_VT_nRST(1.3M RESET) EN */
	ret = gpio_direction_output(GPIO_CAM_VT_nRST, 1);
	CAM_CHECK_ERR_RET(ret, "high CAM_VT_nRST");

	mdelay(5);		/* 70000 cycle */

	gpio_free(GPIO_5M_CAM_nSTBY);
	gpio_free(GPIO_5M_CAM_RESET);
	gpio_free(GPIO_VT_CAM_nSTBY);
	gpio_free(GPIO_CAM_VT_nRST);
	gpio_free(GPIO_VT_CAM_ID);

	return ret;
}
开发者ID:0x7678,项目名称:SJKernel-gn2,代码行数:90,代码来源:naples-camera.c


示例6: arch_setup_additional_pages

int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
{
	struct mips_vdso_image *image = current->thread.abi->vdso;
	struct mm_struct *mm = current->mm;
	unsigned long gic_size, vvar_size, size, base, data_addr, vdso_addr;
	struct vm_area_struct *vma;
	struct resource gic_res;
	int ret;

	down_write(&mm->mmap_sem);

	/*
	 * Determine total area size. This includes the VDSO data itself, the
	 * data page, and the GIC user page if present. Always create a mapping
	 * for the GIC user area if the GIC is present regardless of whether it
	 * is the current clocksource, in case it comes into use later on. We
	 * only map a page even though the total area is 64K, as we only need
	 * the counter registers at the start.
	 */
	gic_size = gic_present ? PAGE_SIZE : 0;
	vvar_size = gic_size + PAGE_SIZE;
	size = vvar_size + image->size;

	base = get_unmapped_area(NULL, 0, size, 0, 0);
	if (IS_ERR_VALUE(base)) {
		ret = base;
		goto out;
	}

	data_addr = base + gic_size;
	vdso_addr = data_addr + PAGE_SIZE;

	vma = _install_special_mapping(mm, base, vvar_size,
				       VM_READ | VM_MAYREAD,
				       &vdso_vvar_mapping);
	if (IS_ERR(vma)) {
		ret = PTR_ERR(vma);
		goto out;
	}

	/* Map GIC user page. */
	if (gic_size) {
		ret = gic_get_usm_range(&gic_res);
		if (ret)
			goto out;

		ret = io_remap_pfn_range(vma, base,
					 gic_res.start >> PAGE_SHIFT,
					 gic_size,
					 pgprot_noncached(PAGE_READONLY));
		if (ret)
			goto out;
	}

	/* Map data page. */
	ret = remap_pfn_range(vma, data_addr,
			      virt_to_phys(&vdso_data) >> PAGE_SHIFT,
			      PAGE_SIZE, PAGE_READONLY);
	if (ret)
		goto out;

	/* Map VDSO image. */
	vma = _install_special_mapping(mm, vdso_addr, image->size,
				       VM_READ | VM_EXEC |
				       VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
				       &image->mapping);
	if (IS_ERR(vma)) {
		ret = PTR_ERR(vma);
		goto out;
	}

	mm->context.vdso = (void *)vdso_addr;
	ret = 0;

out:
	up_write(&mm->mmap_sem);
	return ret;
}
开发者ID:fromfuture,项目名称:Elizium,代码行数:78,代码来源:vdso.c


示例7: wm831x_buckv_probe

static __devinit int wm831x_buckv_probe(struct platform_device *pdev)
{
	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
	int id = pdev->id % ARRAY_SIZE(pdata->dcdc);
	struct wm831x_dcdc *dcdc;
	struct resource *res;
	int ret, irq;

	dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1);

	if (pdata == NULL || pdata->dcdc[id] == NULL)
		return -ENODEV;

	dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
	if (dcdc == NULL) {
		dev_err(&pdev->dev, "Unable to allocate private data\n");
		return -ENOMEM;
	}

	dcdc->wm831x = wm831x;

	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
	if (res == NULL) {
		dev_err(&pdev->dev, "No I/O resource\n");
		ret = -EINVAL;
		goto err;
	}
	dcdc->base = res->start;

	snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1);
	dcdc->desc.name = dcdc->name;
	dcdc->desc.id = id;
	dcdc->desc.type = REGULATOR_VOLTAGE;
	dcdc->desc.n_voltages = WM831X_BUCKV_MAX_SELECTOR + 1;
	dcdc->desc.ops = &wm831x_buckv_ops;
	dcdc->desc.owner = THIS_MODULE;

	ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_ON_CONFIG);
	if (ret < 0) {
		dev_err(wm831x->dev, "Failed to read ON VSEL: %d\n", ret);
		goto err;
	}
	dcdc->on_vsel = ret & WM831X_DC1_ON_VSEL_MASK;

	ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_ON_CONFIG);
	if (ret < 0) {
		dev_err(wm831x->dev, "Failed to read DVS VSEL: %d\n", ret);
		goto err;
	}
	dcdc->dvs_vsel = ret & WM831X_DC1_DVS_VSEL_MASK;

	if (pdata->dcdc[id])
		wm831x_buckv_dvs_init(dcdc, pdata->dcdc[id]->driver_data);

	dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
					     pdata->dcdc[id], dcdc);
	if (IS_ERR(dcdc->regulator)) {
		ret = PTR_ERR(dcdc->regulator);
		dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n",
			id + 1, ret);
		goto err;
	}

	irq = platform_get_irq_byname(pdev, "UV");
	ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq,
				 IRQF_TRIGGER_RISING, dcdc->name,
				 dcdc);
	if (ret != 0) {
		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
			irq, ret);
		goto err_regulator;
	}

	irq = platform_get_irq_byname(pdev, "HC");
	ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_oc_irq,
				 IRQF_TRIGGER_RISING, dcdc->name,
				 dcdc);
	if (ret != 0) {
		dev_err(&pdev->dev, "Failed to request HC IRQ %d: %d\n",
			irq, ret);
		goto err_uv;
	}

	platform_set_drvdata(pdev, dcdc);

	return 0;

err_uv:
	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
err_regulator:
	regulator_unregister(dcdc->regulator);
err:
	if (dcdc->dvs_gpio)
		gpio_free(dcdc->dvs_gpio);
	kfree(dcdc);
	return ret;
}
开发者ID:pgielda,项目名称:linux-2.6-olinuxino,代码行数:98,代码来源:wm831x-dcdc.c


示例8: wm831x_boostp_probe

static __devinit int wm831x_boostp_probe(struct platform_device *pdev)
{
	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
	int id = pdev->id % ARRAY_SIZE(pdata->dcdc);
	struct wm831x_dcdc *dcdc;
	struct resource *res;
	int ret, irq;

	dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1);

	if (pdata == NULL || pdata->dcdc[id] == NULL)
		return -ENODEV;

	dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
	if (dcdc == NULL) {
		dev_err(&pdev->dev, "Unable to allocate private data\n");
		return -ENOMEM;
	}

	dcdc->wm831x = wm831x;

	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
	if (res == NULL) {
		dev_err(&pdev->dev, "No I/O resource\n");
		ret = -EINVAL;
		goto err;
	}
	dcdc->base = res->start;

	snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1);
	dcdc->desc.name = dcdc->name;
	dcdc->desc.id = id;
	dcdc->desc.type = REGULATOR_VOLTAGE;
	dcdc->desc.ops = &wm831x_boostp_ops;
	dcdc->desc.owner = THIS_MODULE;

	dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
					     pdata->dcdc[id], dcdc);
	if (IS_ERR(dcdc->regulator)) {
		ret = PTR_ERR(dcdc->regulator);
		dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n",
			id + 1, ret);
		goto err;
	}

	irq = platform_get_irq_byname(pdev, "UV");
	ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq,
				 IRQF_TRIGGER_RISING, dcdc->name,
				 dcdc);
	if (ret != 0) {
		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
			irq, ret);
		goto err_regulator;
	}

	platform_set_drvdata(pdev, dcdc);

	return 0;

err_regulator:
	regulator_unregister(dcdc->regulator);
err:
	kfree(dcdc);
	return ret;
}
开发者ID:pgielda,项目名称:linux-2.6-olinuxino,代码行数:66,代码来源:wm831x-dcdc.c


示例9: ip6_route_me_harder

int ip6_route_me_harder(struct sk_buff *skb)
{
	struct net *net = dev_net(skb_dst(skb)->dev);
	struct ipv6hdr *iph = ipv6_hdr(skb);
	struct dst_entry *dst;
	struct flowi6 fl6 = {
		.flowi6_oif = skb->sk ? skb->sk->sk_bound_dev_if : 0,
		.flowi6_mark = skb->mark,
		.daddr = iph->daddr,
		.saddr = iph->saddr,
	};

	dst = ip6_route_output(net, skb->sk, &fl6);
	if (dst->error) {
		IP6_INC_STATS(net, ip6_dst_idev(dst), IPSTATS_MIB_OUTNOROUTES);
		LIMIT_NETDEBUG(KERN_DEBUG "ip6_route_me_harder: No more route.\n");
		dst_release(dst);
		return -EINVAL;
	}

	/* Drop old route. */
	skb_dst_drop(skb);

	skb_dst_set(skb, dst);

#ifdef CONFIG_XFRM
	if (!(IP6CB(skb)->flags & IP6SKB_XFRM_TRANSFORMED) &&
	    xfrm_decode_session(skb, flowi6_to_flowi(&fl6), AF_INET6) == 0) {
		skb_dst_set(skb, NULL);
		dst = xfrm_lookup(net, dst, flowi6_to_flowi(&fl6), skb->sk, 0);
		if (IS_ERR(dst))
			return -1;
		skb_dst_set(skb, dst);
	}
#endif

	return 0;
}
EXPORT_SYMBOL(ip6_route_me_harder);

/*
 * Extra routing may needed on local out, as the QUEUE target never
 * returns control to the table.
 */

struct ip6_rt_info {
	struct in6_addr daddr;
	struct in6_addr saddr;
	u_int32_t mark;
};

static void nf_ip6_saveroute(const struct sk_buff *skb,
			     struct nf_queue_entry *entry)
{
	struct ip6_rt_info *rt_info = nf_queue_entry_reroute(entry);

	if (entry->hook == NF_INET_LOCAL_OUT) {
		struct ipv6hdr *iph = ipv6_hdr(skb);

		rt_info->daddr = iph->daddr;
		rt_info->saddr = iph->saddr;
		rt_info->mark = skb->mark;
	}
}

static int nf_ip6_reroute(struct sk_buff *skb,
			  const struct nf_queue_entry *entry)
{
	struct ip6_rt_info *rt_info = nf_queue_entry_reroute(entry);

	if (entry->hook == NF_INET_LOCAL_OUT) {
		struct ipv6hdr *iph = ipv6_hdr(skb);
		if (!ipv6_addr_equal(&iph->daddr, &rt_info->daddr) ||
		    !ipv6_addr_equal(&iph->saddr, &rt_info->saddr) ||
		    skb->mark != rt_info->mark)
			return ip6_route_me_harder(skb);
	}
	return 0;
}

static int nf_ip6_route(struct net *net, struct dst_entry **dst,
			struct flowi *fl, bool strict)
{
	static const struct ipv6_pinfo fake_pinfo;
	static const struct inet_sock fake_sk = {
		/* makes ip6_route_output set RT6_LOOKUP_F_IFACE: */
		.sk.sk_bound_dev_if = 1,
		.pinet6 = (struct ipv6_pinfo *) &fake_pinfo,
	};
	const void *sk = strict ? &fake_sk : NULL;

	*dst = ip6_route_output(net, sk, &fl->u.ip6);
	return (*dst)->error;
}

__sum16 nf_ip6_checksum(struct sk_buff *skb, unsigned int hook,
			     unsigned int dataoff, u_int8_t protocol)
{
	struct ipv6hdr *ip6h = ipv6_hdr(skb);
	__sum16 csum = 0;
//.........这里部分代码省略.........
开发者ID:ARMP,项目名称:android_kernel_lge_x3,代码行数:101,代码来源:netfilter.c


示例10: mdp_config_vsync

void mdp_config_vsync(struct msm_fb_data_type *mfd)
{
	/* vsync on primary lcd only for now */
	if ((mfd->dest != DISPLAY_LCD) || (mfd->panel_info.pdest != DISPLAY_1)
	    || (!vsync_mode)) {
		goto err_handle;
	}

	vsync_clk_status = 0;
	if (mfd->panel_info.lcd.vsync_enable) {
		mfd->total_porch_lines = mfd->panel_info.lcd.v_back_porch +
		    mfd->panel_info.lcd.v_front_porch +
		    mfd->panel_info.lcd.v_pulse_width;
		mfd->total_lcd_lines =
		    mfd->panel_info.yres + mfd->total_porch_lines;
		mfd->lcd_ref_usec_time =
		    100000000 / mfd->panel_info.lcd.refx100;
		mfd->vsync_handler_pending = FALSE;

		mfd->last_vsync_timetick.tv64 = 0;

#ifdef MDP_HW_VSYNC
		if (mdp_vsync_clk == NULL)
			mdp_vsync_clk = clk_get(NULL, "mdp_vsync_clk");

		if (IS_ERR(mdp_vsync_clk)) {
			printk(KERN_ERR "error: can't get mdp_vsync_clk!\n");
			mfd->use_mdp_vsync = 0;
		} else
			mfd->use_mdp_vsync = 1;

		if (mfd->use_mdp_vsync) {
			uint32 vsync_cnt_cfg_dem;
			uint32 mdp_vsync_clk_speed_hz;

			mdp_vsync_clk_speed_hz = clk_get_rate(mdp_vsync_clk);

			if (mdp_vsync_clk_speed_hz == 0) {
				mfd->use_mdp_vsync = 0;
			} else {
				/*
				 * Do this calculation in 2 steps for
				 * rounding uint32 properly.
				 */
				vsync_cnt_cfg_dem =
				    (mfd->panel_info.lcd.refx100 *
				     mfd->total_lcd_lines) / 100;
				vsync_cnt_cfg =
				    (mdp_vsync_clk_speed_hz) /
				    vsync_cnt_cfg_dem;
				mdp_vsync_cfg_regs(mfd, TRUE);
			}
		}
#else
		mfd->use_mdp_vsync = 0;
		hrtimer_init(&mfd->dma_hrtimer, CLOCK_MONOTONIC,
			     HRTIMER_MODE_REL);
		mfd->dma_hrtimer.function = mdp_dma2_vsync_hrtimer_handler;
		mfd->vsync_width_boundary = vmalloc(mfd->panel_info.xres * 4);
#endif

#ifdef CONFIG_FB_MSM_MDDI
		mfd->channel_irq = 0;
		if (mfd->panel_info.lcd.hw_vsync_mode) {
			u32 vsync_gpio = mfd->vsync_gpio;
			u32 ret;

			if (vsync_gpio == -1) {
				MSM_FB_INFO("vsync_gpio not defined!\n");
				goto err_handle;
			}

			ret = gpio_tlmm_config(GPIO_CFG
					(vsync_gpio,
					(mfd->use_mdp_vsync) ? 1 : 0,
					GPIO_CFG_INPUT,
					GPIO_CFG_PULL_DOWN,
					GPIO_CFG_2MA),
					GPIO_CFG_ENABLE);
			if (ret)
				goto err_handle;

			/*
			 * if use_mdp_vsync, then no interrupt need since
			 * mdp_vsync is feed directly to mdp to reset the
			 * write pointer counter. therefore no irq_handler
			 * need to reset write pointer counter.
			 */
			if (!mfd->use_mdp_vsync) {
				mfd->channel_irq = MSM_GPIO_TO_INT(vsync_gpio);
				if (request_irq
				    (mfd->channel_irq,
				     &mdp_hw_vsync_handler_proxy,
				     IRQF_TRIGGER_FALLING, "VSYNC_GPIO",
				     (void *)mfd)) {
					MSM_FB_INFO
					("irq=%d failed! vsync_gpio=%d\n",
						mfd->channel_irq,
						vsync_gpio);
					goto err_handle;
//.........这里部分代码省略.........
开发者ID:KylessOpenlp,项目名称:caf-port,代码行数:101,代码来源:mdp_vsync.c


示例11: s3c_rtc_probe

static int s3c_rtc_probe(struct platform_device *pdev)
{
	struct rtc_device *rtc;
	struct rtc_time rtc_tm;
	struct resource *res;
	int ret;
	int tmp;

	dev_dbg(&pdev->dev, "%s: probe=%p\n", __func__, pdev);

	/* find the IRQs */

	s3c_rtc_tickno = platform_get_irq(pdev, 1);
	if (s3c_rtc_tickno < 0) {
		dev_err(&pdev->dev, "no irq for rtc tick\n");
		return s3c_rtc_tickno;
	}

	s3c_rtc_alarmno = platform_get_irq(pdev, 0);
	if (s3c_rtc_alarmno < 0) {
		dev_err(&pdev->dev, "no irq for alarm\n");
		return s3c_rtc_alarmno;
	}

	dev_dbg(&pdev->dev, "s3c2410_rtc: tick irq %d, alarm irq %d\n",
		 s3c_rtc_tickno, s3c_rtc_alarmno);

	/* get the memory region */

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	s3c_rtc_base = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(s3c_rtc_base))
		return PTR_ERR(s3c_rtc_base);

	rtc_clk = devm_clk_get(&pdev->dev, "gate_rtc");
	if (IS_ERR(rtc_clk)) {
		dev_err(&pdev->dev, "failed to find rtc clock source\n");
		ret = PTR_ERR(rtc_clk);
		rtc_clk = NULL;
		return ret;
	}

	clk_prepare_enable(rtc_clk);

	/* check to see if everything is setup correctly */

	s3c_rtc_enable(pdev, 1);

	dev_dbg(&pdev->dev, "s3c2410_rtc: RTCCON=%02x\n",
		 readw(s3c_rtc_base + S3C2410_RTCCON));

	device_init_wakeup(&pdev->dev, 1);

	/* register RTC and exit */

	rtc = devm_rtc_device_register(&pdev->dev, "s3c", &s3c_rtcops,
				  THIS_MODULE);

	if (IS_ERR(rtc)) {
		dev_err(&pdev->dev, "cannot attach rtc\n");
		ret = PTR_ERR(rtc);
		goto err_nortc;
	}

	s3c_rtc_cpu_type = s3c_rtc_get_driver_data(pdev);

	/* Check RTC Time */

	s3c_rtc_gettime(NULL, &rtc_tm);

	if (rtc_valid_tm(&rtc_tm)) {
		rtc_tm.tm_year	= 100;
		rtc_tm.tm_mon	= 0;
		rtc_tm.tm_mday	= 1;
		rtc_tm.tm_hour	= 0;
		rtc_tm.tm_min	= 0;
		rtc_tm.tm_sec	= 0;

		s3c_rtc_settime(NULL, &rtc_tm);

		dev_warn(&pdev->dev, "warning: invalid RTC value so initializing it\n");
	}

	if (s3c_rtc_cpu_type != TYPE_S3C2410)
		rtc->max_user_freq = 32768;
	else
		rtc->max_user_freq = 128;

	if (s3c_rtc_cpu_type == TYPE_S3C2416 || s3c_rtc_cpu_type == TYPE_S3C2443) {
		tmp = readw(s3c_rtc_base + S3C2410_RTCCON);
		tmp |= S3C2443_RTCCON_TICSEL;
		writew(tmp, s3c_rtc_base + S3C2410_RTCCON);
	}

	platform_set_drvdata(pdev, rtc);

	s3c_rtc_setfreq(&pdev->dev, 1);

	ret = devm_request_irq(&pdev->dev, s3c_rtc_alarmno, s3c_rtc_alarmirq,
			  0,  "s3c2410-rtc alarm", rtc);
//.........这里部分代码省略.........
开发者ID:4pao,项目名称:android_kernel_hardkernel_odroidxu3,代码行数:101,代码来源:rtc-s3c.c


示例12: msm_cam_core_reset

int msm_cam_core_reset(void)
{
	struct clk *clk1;
	int rc = 0;

	clk1 = clk_get(NULL, "csi_vfe_clk");
	if (IS_ERR(clk1)) {
		pr_err("%s: did not get csi_vfe_clk\n", __func__);
		return PTR_ERR(clk1);
	}

	rc = clk_reset(clk1, CLK_RESET_ASSERT);
	if (rc) {
		pr_err("%s:csi_vfe_clk assert failed\n", __func__);
		clk_put(clk1);
		return rc;
	}
	usleep_range(1000, 1200);
	rc = clk_reset(clk1, CLK_RESET_DEASSERT);
	if (rc) {
		pr_err("%s:csi_vfe_clk deassert failed\n", __func__);
		clk_put(clk1);
		return rc;
	}
	clk_put(clk1);

	clk1 = clk_get(NULL, "csi_clk");
	if (IS_ERR(clk1)) {
		pr_err("%s: did not get csi_clk\n", __func__);
		return PTR_ERR(clk1);
	}

	rc = clk_reset(clk1, CLK_RESET_ASSERT);
	if (rc) {
		pr_err("%s:csi_clk assert failed\n", __func__);
		clk_put(clk1);
		return rc;
	}
	usleep_range(1000, 1200);
	rc = clk_reset(clk1, CLK_RESET_DEASSERT);
	if (rc) {
		pr_err("%s:csi_clk deassert failed\n", __func__);
		clk_put(clk1);
		return rc;
	}
	clk_put(clk1);

	clk1 = clk_get(NULL, "csi_pclk");
	if (IS_ERR(clk1)) {
		pr_err("%s: did not get csi_pclk\n", __func__);
		return PTR_ERR(clk1);
	}

	rc = clk_reset(clk1, CLK_RESET_ASSERT);
	if (rc) {
		pr_err("%s:csi_pclk assert failed\n", __func__);
		clk_put(clk1);
		return rc;
	}
	usleep_range(1000, 1200);
	rc = clk_reset(clk1, CLK_RESET_DEASSERT);
	if (rc) {
		pr_err("%s:csi_pclk deassert failed\n", __func__);
		clk_put(clk1);
		return rc;
	}
	clk_put(clk1);

	return rc;
}
开发者ID:FPChaim,项目名称:android_kernel_lge_msm7x27-3.0.x,代码行数:70,代码来源:msm_io_vfe31.c


示例13: lcdc_probe

static int lcdc_probe(struct platform_device *pdev)
{
	struct msm_fb_data_type *mfd;
	struct fb_info *fbi;
	struct platform_device *mdp_dev = NULL;
	struct msm_fb_panel_data *pdata = NULL;
	int rc;

	if (pdev->id == 0) {
		lcdc_pdata = pdev->dev.platform_data;
		return 0;
	}

	mfd = platform_get_drvdata(pdev);

	if (!mfd)
		return -ENODEV;

	if (mfd->key != MFD_KEY)
		return -EINVAL;

	if (pdev_list_cnt >= MSM_FB_MAX_DEV_LIST)
		return -ENOMEM;

	mdp_dev = platform_device_alloc("mdp", pdev->id);
	if (!mdp_dev)
		return -ENOMEM;

	/*
	 * link to the latest pdev
	 */
	mfd->pdev = mdp_dev;
	mfd->dest = DISPLAY_LCDC;

	/*
	 * alloc panel device data
	 */
	if (platform_device_add_data
	    (mdp_dev, pdev->dev.platform_data,
	     sizeof(struct msm_fb_panel_data))) {
		printk(KERN_ERR "lcdc_probe: platform_device_add_data failed!\n");
		platform_device_put(mdp_dev);
		return -ENOMEM;
	}
	/*
	 * data chain
	 */
	pdata = (struct msm_fb_panel_data *)mdp_dev->dev.platform_data;
	pdata->on = lcdc_on;
	pdata->off = lcdc_off;
	pdata->next = pdev;

	/*
	 * get/set panel specific fb info
	 */
	mfd->panel_info = pdata->panel_info;

	if (mfd->index == 0)
		mfd->fb_imgType = MSMFB_DEFAULT_TYPE;
	else
		mfd->fb_imgType = MDP_RGB_565;

	fbi = mfd->fbi;
	fbi->var.pixclock = clk_round_rate(pixel_mdp_clk,
					mfd->panel_info.clk_rate);
	fbi->var.left_margin = mfd->panel_info.lcdc.h_back_porch;
	fbi->var.right_margin = mfd->panel_info.lcdc.h_front_porch;
	fbi->var.upper_margin = mfd->panel_info.lcdc.v_back_porch;
	fbi->var.lower_margin = mfd->panel_info.lcdc.v_front_porch;
	fbi->var.hsync_len = mfd->panel_info.lcdc.h_pulse_width;
	fbi->var.vsync_len = mfd->panel_info.lcdc.v_pulse_width;

#ifndef CONFIG_MSM_BUS_SCALING
	mfd->ebi1_clk = clk_get(NULL, "ebi1_lcdc_clk");
	if (IS_ERR(mfd->ebi1_clk))
		return PTR_ERR(mfd->ebi1_clk);
#endif
	/*
	 * set driver data
	 */
	platform_set_drvdata(mdp_dev, mfd);
	/*
	 * register in mdp driver
	 */
	rc = platform_device_add(mdp_dev);
	if (rc)
		goto lcdc_probe_err;

	pdev_list[pdev_list_cnt++] = pdev;

	return 0;

lcdc_probe_err:
	platform_device_put(mdp_dev);
	return rc;
}
开发者ID:KylessOpenlp,项目名称:caf-port,代码行数:96,代码来源:lcdc.c


示例14: s5k4ecgx_power_down

static int s5k4ecgx_power_down(void)
{
	struct regulator *regulator;
	int ret = 0;

	pr_debug("%s: in", __func__);

	s5k4ecgx_gpio_request();

	/* VT_CAM_nSTBY(1.3M EN) LOW */
	ret = gpio_request(GPIO_VT_CAM_nSTBY, "GPM0");
	if (ret) {
		pr_err("faile to request gpio(GPIO_VT_CAM_nSTBY)");
		return ret;
	}
	ret = gpio_direction_output(GPIO_VT_CAM_nSTBY, 0);
	CAM_CHECK_ERR_RET(ret, "low VT_CAM_nSTBY");

	/* CAM_VT_nRST(1.3M RESET) LOW */
	ret = gpio_request(GPIO_CAM_VT_nRST, "GPM1");
	if (ret) {
		pr_err("faile to request gpio(GPIO_CAM_VT_nRST)");
		return ret;
	}
	ret = gpio_direction_output(GPIO_CAM_VT_nRST, 0);
	CAM_CHECK_ERR_RET(ret, "low CAM_VT_nRST");

	/* 5M_CAM_RESET(5M RESET) LOW */
	ret = gpio_direction_output(GPIO_5M_CAM_RESET, 0);
	CAM_CHECK_ERR_RET(ret, "low 5M_CAM_RESET");

	mdelay(1);		/* 50us */

	/* MCLK */
	ret = s3c_gpio_cfgpin(GPIO_CAM_MCLK, S3C_GPIO_INPUT);
	s3c_gpio_setpull(GPIO_CAM_MCLK, S3C_GPIO_PULL_DOWN);
	CAM_CHECK_ERR(ret, "cfg mclk");

	/* 5M_CAM_nSTBY(5M STBY) LOW */
	ret = gpio_direction_output(GPIO_5M_CAM_nSTBY, 0);
	CAM_CHECK_ERR_RET(ret, "low 5M_CAM_nSTBY");

	/* CAM_AF_2.8V */
	regulator = regulator_get(NULL, "cam_af_2.8v");
	if (IS_ERR(regulator))
		return -ENODEV;
	if (regulator_is_enabled(regulator))
		ret = regulator_force_disable(regulator);
	regulator_put(regulator);
	CAM_CHECK_ERR_RET(ret, "disable cam_af_2.8v");

	/* CAM_DVDD_1.5V(1.3M Core 1.8V) */
	regulator = regulator_get(NULL, "cam_dvdd_1.5v");
	if (IS_ERR(regulator))
		return -ENODEV;
	if (regulator_is_enabled(regulator))
		ret = regulator_force_disable(regulator);
	regulator_put(regulator);
	CAM_CHECK_ERR_RET(ret, "disable cam_dvdd_1.5v");

	/* CAM_SENSOR_IO_1.8V */
	regulator = regulator_get(NULL, "cam_sensor_io_1.8v");
	if (IS_ERR(regulator))
		return -ENODEV;
	if (regulator_is_enabled(regulator))
		ret = regulator_force_disable(regulator);
	regulator_put(regulator);
	CAM_CHECK_ERR_RET(ret, "disable cam_sensor_io_1.8v");

	/* CAM_SENSOR_A2.8V */
	regulator = regulator_get(NULL, "cam_sensor_a2.8v");
	if (IS_ERR(regulator))
		return -ENODEV;
	if (regulator_is_enabled(regulator))
		ret = regulator_force_disable(regulator);
	regulator_put(regulator);
	CAM_CHECK_ERR_RET(ret, "disable cam_sensor_a2.8v");

	/* CAM_ISP_CORE_1.2V */
	regulator = regulator_get(NULL, "cam_isp_core_1.2v");
	if (IS_ERR(regulator))
		return -ENODEV;
	if (regulator_is_enabled(regulator))
		ret = regulator_force_disable(regulator);
	regulator_put(regulator);
	CAM_CHECK_ERR_RET(ret, "disable cam_isp_core_1.2v");

	gpio_free(GPIO_VT_CAM_nSTBY);
	gpio_free(GPIO_CAM_VT_nRST);
	gpio_free(GPIO_5M_CAM_RESET);
	gpio_free(GPIO_5M_CAM_nSTBY);

	return ret;
}
开发者ID:0x7678,项目名称:SJKernel-gn2,代码行数:94,代码来源:naples-camera.c


示例15: seq_read

/**
 *	seq_read -	->read() method for sequential files.
 *	@file: the file to read from
 *	@buf: the buffer to read to
 *	@size: the maximum number of bytes to read
 *	@ppos: the current position in the file
 *
 *	Ready-made ->f_op->read()
 */
ssize_t seq_read(struct file *file, char __user *buf, size_t size, loff_t *ppos)
{
	struct seq_file *m = file->private_data;
	size_t copied = 0;
	loff_t pos;
	size_t n;
	void *p;
	int err = 0;

	mutex_lock(&m->lock);

	/*
	 * seq_file->op->..m_start/m_stop/m_next may do special actions
	 * or optimisations based on the file->f_version, so we want to
	 * pass the file->f_version to those methods.
	 *
	 * seq_file->version is just copy of f_version, and seq_file
	 * methods can treat it simply as file version.
	 * It is copied in first and copied out after all operations.
	 * It is convenient to have it as  part of structure to avoid the
	 * need of passing another argument to all the seq_file methods.
	 */
	m->version = file->f_version;

	/* Don't assume *ppos is where we left it */
	if (unlikely(*ppos != m->read_pos)) {
		while ((err = traverse(m, *ppos)) == -EAGAIN)
			;
		if (err) {
			/* With prejudice... */
			m->read_pos = 0;
			m->version = 0;
			m->index = 0;
			m->count = 0;
			goto Done;
		} else {
			m->read_pos = *ppos;
		}
	}

	/* grab buffer if we didn't have one */
	if (!m->buf) {
		m->buf = seq_buf_alloc(m->size = PAGE_SIZE);
		if (!m->buf)
			goto Enomem;
	}
	/* if not empty - flush it first */
	if (m->count) {
		n = min(m->count, size);
		err = copy_to_user(buf, m->buf + m->from, n);
		if (err)
			goto Efault;
		m->count -= n;
		m->from += n;
		size -= n;
		buf += n;
		copied += n;
		if (!m->count)
			m->index++;
		if (!size)
			goto Done;
	}
	/* we need at least one record in buffer */
	pos = m->index;
	p = m->op->start(m, &pos);
	while (1) {
		err = PTR_ERR(p);
		if (!p || IS_ERR(p))
			break;
		err = m->op->show(m, p);
		if (err < 0)
			break;
		if (unlikely(err))
			m->count = 0;
		if (unlikely(!m->count)) {
			p = m->op->next(m, p, &pos);
			m->index = pos;
			continue;
		}
		if (m->count < m->size)
			goto Fill;
		m->op->stop(m, p);
		kvfree(m->buf);
		m->buf = seq_buf_alloc(m->size <<= 1);
		if (!m->buf)
			goto Enomem;
		m->count = 0;
		m->version = 0;
		pos = m->index;
		p = m->op->start(m, &pos);
	}
//.........这里部分代码省略.........
开发者ID:hmoster,项目名称:android_kernel,代码行数:101,代码来源:seq_file.c


示例16: midas_camera_init

void __init midas_camera_init(void)
{
#ifdef CONFIG_VIDEO_FIMC
	s3c_fimc0_set_platdata(&fimc_plat);
	s3c_fimc1_set_platdata(&fimc_plat);
	s3c_fimc2_set_platdata(NULL);
	s3c_fimc3_set_platdata(NULL);
#ifdef CONFIG_EXYNOS_DEV_PD
	s3c_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
	s3c_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
	s3c_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
	s3c_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
#endif
#ifdef CONFIG_VIDEO_FIMC_MIPI
	s3c_csis0_set_platdata(NULL);
	s3c_csis1_set_platdata(NULL);
#ifdef CONFIG_EXYNOS_DEV_PD
	s3c_device_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
	s3c_device_csis1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
#endif
#endif
#endif /* CONFIG_VIDEO_FIMC */

	camera_class = class_create(THIS_MODULE, "camera");

	if (!s5k4ecgx_dev) {
		s5k4ecgx_dev = device_create(camera_class,
				NULL, 0, NULL, "rear");
		if (IS_ERR(s5k4ecgx_dev)) {
			pr_err("s5k4ecgx_dev : failed to create device!\n");
		} else {
			if (device_create_file(s5k4ecgx_dev,
				&dev_attr_rear_flash) < 0) {
				pr_err("failed to create device file, %s\n",
					dev_attr_rear_flash.attr.name);
			}
			if (device_create_file(s5k4ecgx_dev,
				&dev_attr_rear_camtype)
					< 0) {
				pr_err("failed to create device file, %s\n",
					dev_attr_rear_camtype.attr.name);
			}
			if (device_create_file(s5k4ecgx_dev,
				&dev_attr_rear_camfw) < 0) {
				pr_err("failed to create device file, %s\n",
					dev_attr_rear_camfw.attr.name);
			}
		}
	}
	if (!db8131m_dev) {
		db8131m_dev = device_create(camera_class,
				NULL, 0, NULL, "front");
		if (IS_ERR(db8131m_dev)) {
			pr_err("db8131m_dev : failed to create device!\n");
		} else {
			if (device_create_file(db8131m_dev,
				&dev_attr_front_camtype)
					< 0) {
				pr_err("failed to create device file, %s\n",
					dev_attr_front_camtype.attr.name);
			}
			if (device_create_file(db8131m_dev,
				&dev_attr_front_camfw) < 0) {
				pr_err("failed to create device file, %s\n",
					dev_attr_front_camfw.attr.name);
			}
		}
	}
}
开发者ID:0x7678,项目名称:SJKernel-gn2,代码行数:69,代码来源:naples-camera.c


示例17: mipi_dsi_panel_power

static int mipi_dsi_panel_power(int on)
{
	static struct regulator *v_lcm, *v_lcmio, *v_dsivdd;
	static bool bPanelPowerOn = false;
	int rc;

	char *lcm_str = "8921_l11";
	char *lcmio_str = "8921_lvs5";
	char *dsivdd_str = "8921_l2";

	
	if (panel_type == PANEL_ID_NONE)
		return -ENODEV;

	PR_DISP_INFO("%s: state : %d\n", __func__, on);

	if (!dsi_power_on) {

		v_lcm = regulator_get(&msm_mipi_dsi1_device.dev,
				lcm_str);
		if (IS_ERR(v_lcm)) {
			PR_DISP_ERR("could not get %s, rc = %ld\n",
				lcm_str, PTR_ERR(v_lcm));
			return -ENODEV;
		}

		v_lcmio = regulator_get(&msm_mipi_dsi1_device.dev,
				lcmio_str);
		if (IS_ERR(v_lcmio)) {
			PR_DISP_ERR("could not get %s, rc = %ld\n",
				lcmio_str, PTR_ERR(v_lcmio));
			return -ENODEV;
		}


		v_dsivdd = regulator_get(&msm_mipi_dsi1_device.dev,
				dsivdd_str);
		if (IS_ERR(v_dsivdd)) {
			PR_DISP_ERR("could not get %s, rc = %ld\n",
				dsivdd_str, PTR_ERR(v_dsivdd));
			return -ENODEV;
		}

		rc = regulator_set_voltage(v_lcm, 3000000, 3000000);
		if (rc) {
			PR_DISP_ERR("%s#%d: set_voltage %s failed, rc=%d\n", __func__, __LINE__, lcm_str, rc);
			return -EINVAL;
		}

		rc = regulator_set_voltage(v_dsivdd, 1200000, 1200000);
		if (rc) {
			PR_DISP_ERR("%s#%d: set_voltage %s failed, rc=%d\n", __func__, __LINE__, dsivdd_str, rc);
			return -EINVAL;
		}

		rc = gpio_request(VILLE_GPIO_LCD_RSTz, "LCM_RST_N");
		if (rc) {
			PR_DISP_ERR("%s:LCM gpio %d request failed, rc=%d\n", __func__,  VILLE_GPIO_LCD_RSTz, rc);
			return -EINVAL;
		}

		dsi_power_on = true;
	}

	if (on) {
		PR_DISP_INFO("%s: on\n", __func__);
		rc = regulator_set_optimum_mode(v_lcm, 100000);
		if (rc < 0) {
			PR_DISP_ERR("set_optimum_mode %s failed, rc=%d\n", lcm_str, rc);
			return -EINVAL;
		}

		rc = regulator_set_optimum_mode(v_dsivdd, 100000);
		if (rc < 0) {
			PR_DISP_ERR("set_optimum_mode %s failed, rc=%d\n", dsivdd_str, rc);
			return -EINVAL;
		}

		rc = regulator_enable(v_dsivdd);
		if (rc) {
			PR_DISP_ERR("enable regulator %s failed, rc=%d\n", dsivdd_str, rc);
			return -ENODEV;
		}
		hr_msleep(1);
		rc = regulator_enable(v_lcmio);
		if (rc) {
			PR_DISP_ERR("enable regulator %s failed, rc=%d\n", lcmio_str, rc);
			return -ENODEV;
		}

		rc = regulator_enable(v_lcm);
		if (rc) {
			PR_DISP_ERR("enable regulator %s failed, rc=%d\n", lcm_s 

鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ IS_ERROR函数代码示例发布时间:2022-05-30
下一篇:
C++ IS_ENTRY_CLIENT函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap